CBI Cooling - Temperature regulation
|
|
- Kory Chandler
- 5 years ago
- Views:
Transcription
1 CBI Cooling - Temperature regulation
2 Non-spill flat-face pollution preventing technology cold water, glycol water, hot water, steam, mineral or synthetic heat transfer oil, lubricating oil, gas circuits: argon, nitrogen, helium, etc. Spill-free to ensure operator safety - no discharge and no work place contamination, - protection for tools and production. Pollution-preventing flat faces to guarantee the integrity of fluids and gases - no pollution enters your circuits. A wider range The CBI is now available in 5 nominal bores: 3, 6, 9, 12 and 16 mm. Excellent mechanical strength The robust construction with long plug guiding in the socket, in the connected position provides the CBI with great strength to withstand high mechanical stresses (vibrations, oscillations, etc). 2
3 . ensures permanency of sealing Push; and its connected Automatic locking CBIs give you ever easier handling. A concept that is especially suitable for: - blind connection, - repeated connection. Ease of connection Front sealing by a seal fitted into the back adapter on all cylindrical male plugs. Compact design Especially suitable for difficult access situations. Efficiency Maximum flow in the smallest size. Sealing by sealing-kit KES ring possible on all cylindrical male sockets. 3D-files available on request. Possibility of plug installed recessed into pocket 3
4 Technical data CBI 03 CBI 06 CBI 09 CBI 12 CBI 16 Max. working pressure (bar) Bore diameter (mm) Shut-off double Sealing Seals: Nitrile (NBR) Fluorocarbon (FPM) Ethylene-Propylene (EPDM) * Perfluoroelastomer (FFKM) in the fluid jet Other seal materials available on request. Construction Largely stainless steel with high mechanical resistance. Construction 100% stainless steel available on certain models: see part-numbers tables. Socket dust cap: aluminium and Chloroprene (CR) Plug dust cap: Chloroprene (CR) * Important! Never use Ethylene-Propylene seals with fluids of mineral origin (oil, fat etc ). Working temperatures Without dust cap Type of flow Type of seal Working temperatures ( C) Cold or hot water, hydraulic and mineral oils Nitrile (NBR) - 15 to C Heat transfer oil Fluorocarbon (FPM) - 10 to C Perfluoroelastomer (FFKM) 0 to C Glycol water Ethylene-Propylene (EPDM) * - 20 to C Hot water and steam Ethylene-Propylene (EPDM) * - 20 to C Working temperatures for dust caps in Chloroprene (CR): - 20 to C For other temperatures, consult us. 4
5 Hydraulic flow rate / pressure drop charts Speed of flow less than or equal to 5 m/s: - all seals Speed of flow between 5 and 10 m/s: - Nitrile and Fluorocarbon seals - temperatures 60 C Speed (m/s) Flow (l/mn) CBI 03 CBI 06 CBI 09 CBI 12 CBI , , CBI 03 and CBI 06 Pressure drop (bar) Flow (l/min) CBI 09 to CBI 16 Pressure drop (bar) Test conditions: - Fluid: water - Direction of flow: plug socket Flow (l/min) 5
6 Pneumatic flow rate / pressure drop charts Pressure drop (bar) Test conditions: - Inlet pressure: 6 bar - Direction of flow: plug socket Flow (Nm 3 /h) Plugs installed recessed in pocket All plugs can be fully flush-fitted. When recessed mounting CBI 06 and 09 plugs, to improve grip when disconnecting, it is essential to use the enhanced shoulder locking ring type CBI 06 and 09 sockets. Enhanced shoulder locking ring type CBI 06 and CBI 09 sockets Add the code VP to the CBI 06 or 09 socket part-numbers pages 7 and 8. Ex.: CBI /IA/VP Dimensions CBI 06: Ø = 24 mm - L = 30 mm CBI 09: Ø = 36 mm - L = 43 mm Machining drawings for recessed installation available on request 6
7 Part-numbers Sockets Model Designation Thread or Ø Dimensions (mm) L1 L2 L3 L4 H/flats Part-numbers CBI Sockets G 1/8 48,5 13 female thread NPT 1/8 46,5 13 CBI /IA (1) CBI /IA (1) CBI Sockets G 1/ female thread NPT 1/ CBI /IA (1) CBI /IA (1) 3. Sockets 90 female thread G 1/4 NPT 1/4 56, ,5 24, CBI /IA/RE CBI /IA/RE 4. Sockets male thread G 1/4 G 3/8 61, CBI /IA CBI /IA M 16 x 1,5 24 cone for tube Ø 10 mm CBI /IA 5. Sockets 90 male thread G 1/4 G 3/8 56, , , CBI /IA/RE CBI /IA/RE M 16 x 1,5 24 cone for tube Ø 10 mm 56, CBI /IA/RE 6. Sockets for rubber hose Ø 10 mm 78, CBI /IA 7. Sockets for self-locking hose Ø 3/8" 74,5 23,5 20 CBI /IA/CN 8. Sockets 90 for self-locking hose Ø 3/8" 56,5 23, CBI /IA/CN/RE (1) These part-numbers are also available in 100% stainless steel construction: see page 11 7
8 Part-numbers Sockets Model Designation Thread or Ø Dimensions (mm) L1 L2 L3 L4 H/flats Part-numbers CBI Sockets female thread G 3/8 NPT 3/8 75, ,5 24 CBI /IA (1) CBI /IA (1) 10. Sockets male thread G 3/8 G 1/ CBI /IA (1) CBI /IA 11. Sockets 90 male thread G 3/8 99, ,5 21 CBI /IA/RE 12. Sockets for self-locking hose Ø 1/2" CBI /IA/CN 13. Sockets 90 for self-locking hose Ø 1/2" CBI /IA/CN/RE CBI Sockets female thread G 1/ CBI /IA (1) NPT 1/ CBI /IA (1) CBI Sockets female thread G 3/4 129,5 36 CBI /IA NPT 3/4 128,5 36 CBI /IA (1) These part-numbers are also available in 100% stainless steel construction: see page 11 8
9 Part-numbers Plugs Model Designation Thread Dimensions (mm) L1 L2 L3 L4 H/flats Part-numbers CBI Plugs G 1/8 43,5 13 female thread NPT 1/8 41,5 13 CBI /IA (1) CBI /IA (1) 2. Plugs BSP male thread with and integrated sealing G 1/8 39, CBI /IA (1) CBI Plugs BSP male thread G 1/ with and integrated sealing G 3/8 53, CBI /IA (1) CBI /IA 4. Extended plugs, BSP male thread with and integrated sealing G 1/4 G 1/ CBI /IA/64 CBI /IA/80 G 1/ CBI /IA/ Plugs conical male thread NPT 1/4 NPT 3/8 53, CBI /IA CBI /IA R 1/4 53, CBI /IA CBI Plugs G 3/ CBI /IA (1) female thread 7. Plugs BSP male thread with and integrated sealing G 3/ CBI /IA (1) 8. Plugs conical male thread NPT 3/8 R 3/ CBI /IA CBI /IA (1) These part-numbers are also available in 100% stainless steel construction: see page 11 9
10 Part-numbers Plugs Model Designation Thread Dimensions (mm) L1 L2 L3 L4 H/flats Part-numbers CBI Plugs female thread G 1/ CBI /IA (1) NPT 1/ CBI /IA (1) 10. Plugs BSP male thread with and integrated sealing G 1/ CBI /IA (1) 11. Plugs conical male thread R 1/ CBI /IA (1) CBI Plugs female thread G 3/ CBI /IA NPT 3/ CBI /IA 13. Plugs BSP male thread with and integrated sealing G 3/4 100, CBI /IA (1) These part-numbers are also available in 100% stainless steel construction: see page 11 10
11 Sealing Fluorcarbon (FPM), Ethylene-Propylene (EPDM) and Perfluoroelastomer (FFKM) seals are available on all models. Add the corresponding code to the socket and plug part-numbers: JV: Fluorocarbon seals JE: Ethylene-Propylene seals JKV: Perfluoroelastomer seals in the fluid jet Ex.: CBI /IA/JV Protective dust caps Available for all the models. Socket dust cap Plug dust cap part-numbers: part-numbers: CBI xx.8500 CBI xx.8550 KES sealing-kit Possible on all the BSP male threaded sockets. Part-numbers of the KES sealing-kits: G 1/4 KES G 3/8 KES G 1/2 KES Available with 3 different types of seals: No code : Nitrile seal JV code : Fluorocarbon seal JE code : Ethylene-Propylene seal. Interchangeability with the SPI range CBI 06 and CBI 09 sockets and plugs are fully compatible with the Stäubli SPI range: - SPI plugs with CBI sockets - SPI socket with CBI plugs 100% stainless steel construction Available on certain models: see part-numbers tables. Add the code BF to the concerned part-numbers of the sockets and the plugs. Ex.: CBI /IA/BF Overall dimensions in coupled position L = (L1 socket + L1 plug ) X Model X (mm) Model X (mm) CBI 03 18,6 CBI 06 24,7 CBI X CBI CBI We reserve the right to modify product specification without prior notice. 11
12 Brazil Tel.: Belgium Tel.: +32 (0) Portugal Tel.: /50 China Tel.: North America (USA, Canada, Mexico) Tel.: / Czech Republic, Slovakia, Hungary Tel.: France Tel.: +33 (0) Germany, Austria Tel.: +49 (0)921/ Italy Tel.: +39 (0)362/944.1 Romania Tel.: Russia Tel.: connectors.ru@staubli.com Spain Tel.: connectors.es@staubli.com Switzerland Tel.: +41 (0)43/ connectors.ch@staubli.com Hong Kong Tel.: connectors.hk@staubli.com Japan Tel.: connectors.stkk@staubli.com Singapore Tel.: +65 / connectors.sg@staubli.com South Korea Tel.: connectors.kr@staubli.com Taiwan Tel.: connectors.tw@staubli.com Poland Tel.: connectors.pl@staubli.com United Kingdom Tel.: +44 (0) connectors.uk@staubli.com Turkey Tel.: / connectors.tr@staubli.com Stäubli units Connectors distributors International sales coordination Stäubli Faverges - BP 70 - F Faverges Tel.: +33 (0) Fax: +33 (0) connectors.sales@staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. Stäubli, 10/11/2011 D e B Printed on PEFC paper
CBI Cooling - Temperature regulation
CBI Cooling - Temperature regulation Non-spill flat-face pollution preventing technology cold water, glycol water, hot water, steam, mineral or synthetic heat transfer oil, lubricating oil, gas circuits:
More informationCBI Cooling - Temperature regulation
CBI Cooling - Temperature regulation Non-spill flat-face pollution preventing technology cold water, water glycol, hot water, steam, mineral or synthetic heat transfer oil, lubricating oil, gas circuits:
More informationFrame through-beam sensors
Frame through-beam sensors Features Wide range of sizes: passage sizes from 25 x 23 mm to 300 x 397.5 mm Metal housings Integrated evaluation unit Connection by means of connector Degree of protection
More informationThrough-beam ring sensors
Throughbeam ring sensors Features Wide range of sizes: ring diameters of 10, 15 and 20 mm Metal housings Separate evaluation unit Connection by means of S8 connector Degree of protection IP 63 Adjustable
More informationWorking Pressure PB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
RECTUS Series 21KB Technical Description Mini industrial coupling, internationally the most coon profile for this nominal diameter, in double shut-off design. Above average flow performance for liquid
More informationBenchTop Extraction Arms with unbeatable flexibility
BenchTop Extraction Arms with unbeatable flexibility A new generation of BenchTop extraction arms with unbeatable flexibility Nederman introduces a new generation of BenchTop arms the FX, FX and FX. These
More informationCatalogue NE 0506 FIXTURING SYSTEM. Modular Zero-Point Fixturing for Pallets, Workpieces and Fixtures
Catalogue NE 0506 FIXTURING SYSTEM Modular Zero-Point Fixturing for Pallets, Workpieces and Fixtures Modular Zero Point Fixturing System 9000 Changes in Seconds Constant zero point without realignment
More informationNGR. Guided Wave Radar Level Transmitter
Guided Wave Radar Level Transmitter measuring monitoring analyzing NGR For Liquids Operates Independent of Density, Temperature, Pressure, Humidity, and Conductivity Standard Measuring Length: 6. Ft (Longer
More informationFITTINGS ADVANTAGE AND EXPERTISE IN YOUR INDUSTRY
PNEUFITDADVANTAGE INCH RANGE Acetal push-in fittings Comprehensive size and range from 5/32" to 1/2" Approved for use in pneumatics, medical, food and drinks applications FITTINGS ADVANTAGE AND EXPERTISE
More informationMeasuring range: l/h water m³/h air (20 C, bar) Connection: Flange DN 15...
Full Metal Variable Area Flow Meter and Counter for Liquids and Gases monitoring analysing BGN Special versions up to 600 bar O Nominal diameter up to DN 150 S2 Measuring range: 0.5-5.0... 13000-130000
More informationKDS. All Metal Variable Area Flowmeter. for Liquids and Gases
All Metal Variable Area Flowmeter for Liquids and Gases measuring monitoring analysing : 0.1-1... 20-200 water 3-30 Nm3/h... 600-6000 Accuracy: ±3 % of full p max : 420 bar; t max : 130 C Connection: ¼"
More informationRIVKLE Elastic. Fastener for noise and vibration decoupling applications
2300/11.02 RIVKLE Elastic Fastener for noise and vibration decoupling applications Contents RIVKLE Elastic Blind rivet nuts for noise and vibration decoupling applications Page The system 3 The principle
More informationBGN. All Metal Variable Area Flowmeter and Counter. for liquids and gases
All Metal Variable Area Flowmeter and Counter for liquids and gases monitoring analysing BGN Measuring range: 0.5-5.0... 13000-130000 l/h water 0.015-0.15... 240-2400 m³/h air (20 C, 1.013 bar) Accuracy
More informationCAT GB. Quick-release couplings and accessories for Air Conditioning & Refrigeration. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0118-GB Quick-release couplings and accessories for Air Conditioning & Refrigeration UNI EN ISO 9001 Cert. n 905 ISO/TS 16949 Quick-release couplings and accessories for Air Conditioning & Refrigeration
More informationTechnical Description Standard design with ball locking mechanism for high pressure applications. Rugged construction.
Ball Locking Parker 1/4" up to 3/4" SM-Series Technical escription Standard design with ball locking mechanism for high pressure applications. Rugged construction. dvantages size 1/2" and above feature
More informationElectromagnetic flowmeter in all metal design Model MIM
Electromagnetic Flowmeter all metal design measuring monitoring analysing MIM O O For measuring and monitoring of conductive liquids OAccuracy: O < ± (0.8% of reading + 0.5% of full scale) O O Flow and
More informationKAL-K. Electronic Flow Monitor. for liquids. Range: approx cm/s. p max : 100 bar. Temperature of medium: C Option: 0...
Electronic Flow Monitor for liquids measuring monitoring analysing KAL-K Range: approx. 4-200 cm/s p max : 100 bar Temperature of medium: -20... +80 C Option: 0... +120 C Process connection: G ¼, G ½,
More informationBenchTop Extraction Arms with unbeatable flexibility
BenchTop Extraction Arms with unbeatable flexibility A new generation of BenchTop extraction arms with unbeatable flexibility Nederman introduces a new generation of BenchTop arms the FX, FX and FX. These
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More information0226/18-V1-02 IMTEC HR. High mechanical Resistance fastener for composite materials
0226/18-V1-02 IMTEC HR High mechanical Resistance fastener for composite materials IMTEC HR Cold forged fastener BÖLLHOFF used its expertise in assembly technologies to combine the best of metals and plastics.
More informationTUR. Turbine Wheel Flowmeter. Plastic Model for Liquids. Measuring Ranges: GPM or GPM (Water)
Turbine Wheel Flowmeter Plastic Model for Liquids measuring monitoring analyzing TUR TUR with Transmitter TUR with ADI-1 Measuring Ranges: 5.3...88 GPM or 11...440 GPM (Water) Measuring Accuracy: ± 1%
More informationZurcon. Glyd Ring. Your Partner for Sealing Technology
Zurcon Glyd Ring P Your Partner for Sealing Technology Your Partner for Sealing Technology Trelleborg Sealing Solutions is a major international sealing force, uniquely placed to offer dedicated design
More informationP7500 Series Probes Tip Selection, Rework and Soldering Guide
How-to-Guide P7500 Series Probes Tip Selection, Rework and For Use with Memory Component Interposers P7500 Series Probe Tip Selection, Rework and for Use with Memory Component Interposers Introduction
More informationFull Metal Variable Area Flowmeter and Counter Model BGF
Full Metal Variable Area Flowmeter and Counter for horizontal and vertical mounting measuring monitoring analysing BGF OO Measuring range: 10-100... 6000-60000 l/h water 0.3-3.0... 170-1700 m³/h air (20
More informationMIM. Electromagnetic Flowmeter. Compact, All-metal Design
Electromagnetic Flowmeter Compact, All-metal Design measuring monitoring analyzing MIM For Measurement and Monitoring of Conductive Liquids Flow and Temperature Measurement Switching, Transmitting, and
More informationRelative and absolute pressure transmitter type 528
Relative and absolute pressure transmitter type 528 The compact type 528 pressure transmitter is based upon the Huba Control developed and since over 20 years well proven ceramic technology. These transmitters
More informationSTAINLESS STEEL STAINLESS STEEL MANUFACTURING STAINLESS STEEL TRADING BRIGHT BARS WIRES PRECISION COMPONENTS
STAINLESS STEEL BRIGHT BARS WIRES PRECISION COMPONENTS BHANSALI is diversified business group with interests in Stainless Steel, Textiles and ABS Plastics. Under the dynamic leadership of Mr. Pukhraj Bhansali
More informationTOOLS & TECHNOLOGY. # techguide
TOOLS & TECHNOLOGY # techguide ECOROLL AG Werkzeugtechnik ECOROLL AG Werkzeugtechnik is the leading supplier of tools and machines for mechanically improving the surfaces of metal components. In close
More informationThe compact test- disconnect terminal interface system for protection and secondary technology
POCON POWER Connector The compact test- disconnect terminal interface system for protection and secondary technology POCON the compact test-disconnect terminal interface system Safe control and testing
More informationRemote control Servo H / Valve H Pneumatic proportional remote control valve series
Pneumatic proportional remote control valve series Catalogue PDE 2513TCUK-ab Parker solutions for the Truck and Trailer Industry Parker s many years of experience in designing pneumatic products and systems
More informationCISCO ONS /100-GHZ INTERLEAVER/DE-INTERLEAVER FOR THE CISCO ONS MULTISERVICE TRANSPORT PLATFORM
DATA SHEET CISCO ONS 15216 50/100-GHZ INTERLEAVER/DE-INTERLEAVER FOR THE CISCO ONS 15454 MULTISERVICE TRANSPORT PLATFORM The Cisco ONS 15216 50/100-GHz Interleaver/De-interleaver is an advanced 50/100-GHz
More informationLTS. Resisitve Temperature Sensor hygienic design. Temperature. Measuring range: C Accuracy Class A according to DIN IEC 751 p
Resisitve Sensor hygienic design measuring monitoring analysing LTS Measuring range: -50 +250 C Accuracy Class A according to DIN IEC 751 p max : 10 bar Process connection: G ½ standard, G ½ or M cavity
More informationDUK. Compact Ultrasonic Flowmeter
Compact Ultrasonic Flowmeter measuring monitoring analyzing DUK Measuring Ranges: 0.0... GPM to 0.6...60 GPM Accuracy: ±0.7 % of Reading + ±0.7% of F.S. Turndown Ratio: 0: P max : 30 PSI; T max : 48 F
More informationED701 General Industry Pressure Transmitter
ED701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationPRODUCT DATA. Piezoelectric Accelerometer Miniature Triaxial DeltaTron Accelerometers Types 4524, 4524 B
PRODUCT DATA Piezoelectric Accelerometer Miniature Triaxial DeltaTron Accelerometers Types 4524, 4524 B Types 4524 and 4524 B are lightweight triaxial piezoelectric OrthoShear accelerometers, each with
More informationMagnetic Inductive Flowmeter
Magnetic Inductive Flowmeter for conductivity liquids measuring monitoring analysing Measuring range: up to 10 m/s Accuracy: ±1.5% of reading ±0.5% full scale pmax: PN40 tmax: -40 +150 C Connection: flange
More informationKeysight Technologies 87405C 100 MHz to 18 GHz Preamplifier. Technical Overview
Keysight Technologies 8745C 1 MHz to 18 GHz Preamplifier Technical Overview 2 Keysight 8745C 1 MHz to 18 GHz Preamplifier Technical Overview Introduction The Keysight Technologies, Inc. 8745C preamplifier
More informationPRODUCT DATA. Sound Intensity Calibrator Type 4297
PRODUCT DATA Sound Intensity Calibrator Type 4297 Sound Intensity Calibrator Type 4297 is used for on-site sound-pressure calibration and pressure-residual intensity-index verification. Its most important
More informationA Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Series 000 Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Series 000 000-SAN Cable with separate electronics Description
More informationVerifying Power Supply Sequencing with an 8-Channel Oscilloscope APPLICATION NOTE
Verifying Power Supply Sequencing with an 8-Channel Oscilloscope Introduction In systems that rely on multiple power rails, power-on sequencing and power-off sequencing can be critical. If the power supplies
More informationPrecision Spectra OMG
Precision Spectra OMG Model SC-9315 CAUTION: Federal law restricts this device to sale, distribution and use by or on the order of a physician. 90870349-01 REV A This page intentionally left blank. 90870349-01
More informationRadial riveting technology
Radial riveting technology The world s market leader for riveting machines High-quality process Efficient and gentle forming at the same time Innovative Process Control...Joining is our business worldwide!
More information20X Low Capacitance Probe P6158 Datasheet
20X Low Capacitance Probe P6158 Datasheet Circuit board impedance testing (TDR) High-speed sampling systems P6158 DC to 3 GHz The P6158 is a 3 GHz, 20X, low-capacitance probe. The P6158 is ideal for high-speed
More informationLCI. Inductive Conductivity/ Concentration and Temperature Transmitter. Compact or separate version
Inductive Conductivity/ Concentration and Temperature Transmitter measuring monitoring analysing LCI or separate version Activation of up to four measuring ranges (up to 2000 ms/cm) Concentration measurement
More informationProduct Overview Fastening and Assembly Technology 1190/15.02
Product Overview Fastening and Assembly Technology 1190/15.02 We serve every link of your supply chain Development Testing Quality n Application engineering n Customer-specific solutions n Investigation
More informationProduct Overview Fastening and Assembly Technology 1190/14.02
Product Overview Fastening and Assembly Technology 1190/14.02 We serve every link of your supply chain all over the world! Development Testing Quality Production Logistics Application engineering Customer-specific
More informationWelcome to the IFR Press Conference 30 August 2012, Taipei
Welcome to the IFR Press Conference 3 August 212, Taipei Continued success of the robotics industry Welcome by IFR President Dr. Shinsuke Sakakibara Presentation of the results of World Robotics 212 Industrial
More informationRepair Manual 12 PL PILOT
Repair Manual 12 PL PILOT 12 PL PILOT REPAIR MANUAL INDEX Introduction... 1 Elastomer Materials... 2 Disassembly... 3 Assembly... 7 Testing... 11 NOTE: We reserve the right to modify or change, without
More informationAutomated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software APPLICATION NOTE
Automated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software Introduction For undergraduate students in colleges and universities, frequency response testing
More informationIntrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F, IS-21-F
Replacement product: Model IS-3 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F,
More informationDVZ. Vortex Flowmeter Compact. for low viscosity liquids
Vortex Flowmeter Compact for low viscosity liquids measuring monitoring analysing DVZ Range: 0. -4. 0-00 L/min Accuracy: ±.% of full scale p max : 0 bar; t max : 80 C Connections: G ¼...G, ¼" NPT..." NPT
More informationRepair Parts Sheet A UNIT OF APPLIED POWER INC. Electric PumpsPER2321/PER2341/4003 L-833 REV. O 05/98 PC For Date Codes Beginning With "O"
Repair Parts Sheet A UNIT OF APPLIED POWER INC. L-833 REV. O 05/98 PC 5240 Electric PumpsPER2321/PER2341/4003 For Date Codes Beginning With "O" Figure 1 - Parts List 1 1 Nameplate 2 Y697003 4 Pop Rivet
More informationstripax The professional stripping tool
stripax The professional stripping tool stripax the original: developed from experience Weidmüller is the world s leading manufacturer of solutions for electrical connectivity, transmission, conditioning
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationCisco ONS Metropolitan Dense Wavelength Division Multiplexing 100-GHz FlexLayer Filter Solution
Data Sheet Cisco ONS 15216 Metropolitan Dense Wavelength Division Multiplexing 100-GHz FlexLayer Filter Solution The Cisco ONS 15216 Metropolitan Dense Wavelength-Division Multiplexing (DWDM) FlexLayer
More information2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y
RA 9 /6.98 -Way Proportional Logic Cartridge Valve Model FE.. (Series X and X) Size 6... 6... 6 PSI (5 bar)... 75 GPM (8 L/min) RA 9 /6.98 Replaces: 5.9 Characteristics: Single land throttle valve (main
More informationR&S ENV216 Two-Line V-Network For disturbance voltage measurements on single-phase EUTs
R&S ENV216 Two-Line V-Network For disturbance voltage measurements on single-phase EUTs Test & Measurement Data Sheet 03.00 R&S ENV216 Two-Line V-Network At a glance The R&S ENV216 two-line V-network meets
More informationCreating the world technology leader in surface solutions under one roof
Creating the world technology leader in surface solutions under one roof We are the world technology leader in the growing surface solutions market. Combining the complementary strengths of Oerlikon Balzers
More informationCENTRIFUGAL PUMPS FPE Series
OPERATING MANUAL CENTRIFUGAL PUMPS FPE Series Model : Model No.: Table of Contents Page 1. Maintenance 1 1.1. Disassembly 1 1.1.1. General 1 1.1.2. Impeller 1 1.1.3. Complete disassembly 1 1.2. Assembly
More informationPassive Voltage Probes
Passive Voltage Probes TPP1000 TPP0500 TPP0502 Datasheet Connectivity Integrated Oscilloscope and Probe Measurement System provides Intelligent Communication that Automatically Scales and Adjusts Units
More informationPRODUCT DATA. Falcon Range 1/4-inch Microphone Preamplifier Type 2670
PRODUCT DATA Falcon Range 1/4-inch Microphone Preamplifier Type 2670 1/4-inch Microphone Preamplifier Type 2670 is a Falcon Range product for precision acoustic measurements with Brüel & Kjær s wide rangf
More informationSCXI High-Voltage Terminal Block
INSTALLATION GUIDE SCXI -1324 High-Voltage Terminal Block This guide describes how to install and use the SCXI-1324 high-voltage terminal block with the SCXI-1160 module. The SCXI-1324 high-voltage terminal
More informationSoldering a P7500 to a Nexus DDR Component Interposer
Soldering a P7500 to a Nexus DDR Component Interposer Introduction This document shows an example of how to solder P7500 tips to the oscilloscope version of a Nexus DDR Component Interposer board. The
More informationSINGLE SHUT OFF QUICK RELEASE COUPLINGS
233 Series C = 0,844 v 0 200 400 600 Compact robust construction High flow, low drop Wide range of connections C = 0,844 v 0 3 6 9 12 15 18 21 5 = 20mm 2 560 l/min ( inlet, drop bar) Rectus 21, Rectus
More informationSCXI High-Voltage Terminal Block
INSTALLATION GUIDE SCXI -326 High-Voltage Terminal Block Introduction This guide describes how to use and install the SCXI-326 high-voltage terminal block with the SCXI-62, the SCXI-63, the SCXI-62HV,
More informationVersatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY Pistol models and angle models with flat angle head, 90 angle head, worm drive Torque range: from 6
More informationPassive High Voltage Probes P5100A-TPP0850-P5122-P5150-P6015A Datasheet
Passive High Voltage Probes P5100A-TPP0850-P5122-P5150-P6015A Datasheet P5150 DC to 500 MHz 2500 V Peak, 1000 V RMS CAT II 50 X Floatable up to 600 V RMS CAT II or 300 V RMS CAT III For TPS2000 and THS3000
More informationLE160 LE320 Linear Equalizer Datasheet Tektronix Linear Equalizer
LE160 LE320 Linear Equalizer Datasheet Tektronix Linear Equalizer USB programmable output duty cycle symmetry control Precision output level controls permit signaling from 0 (Return to Zero) well in excess
More informationTekConnect Adapters TCA75 TCA-BNC TCA-SMA TCA-N TCA-292MM TCA292D Datasheet
Adapters TCA75 TCA-BNC TCA-SMA TCA-N TCA-292MM TCA292D Datasheet TCA-SMA -to-sma DC to 18 GHz (instrument dependent) TCA-292MM -to-2.92 mm DC to 25 GHz (instrument dependent) SMA compatible TCA-292D -to-2.92
More informationTYPE 3740XL EXTRA LARGE WET RUNNING CARTRIDGE SPLIT SEAL
1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available
More informationKeysight Technologies E1834E/G/J/M/Z Mounted Beam Delivery Optics. Preliminary Data Sheet
Keysight Technologies E1834E/G/J/M/Z Mounted Beam Delivery Optics Preliminary Data Sheet The Keysight Technologies, Inc. E1834 family of beam delivery optics uses high performance mounts to meet the pointing
More informationSNAPLOC. Vibration and noise-decoupling fastening systems
4350/13.02 SNAPLOC Vibration and noise-decoupling fastening systems SNAPLOC Decoupling plug-in connections Contents Page The system 3 The function 3 The variants of the system 4 Installation tool for plate
More information369 Series Connectors
KEY FEATURES 3, 6 and 9 way configurations Based on existing ARINC 809 / EN4165 Composite materials Robust design Fully sealed cable and mating interface Mounting of inline with cable-tie Button latching
More informationLinACE absolute linear shaft encoder
20 th April 2012 LinACE absolute linear shaft encoder LinACE is an extremely robust absolute linear cylindrical encoder system designed for direct integration into hydraulic, pneumatic, electromechanical
More informationTYPE 3740 WET RUNNING CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring Adapter Assy. C Sealing Element Gasket D Sealing Element Strip E Sealing Element O-ring F Set Screw G Primary Ring H Retaining Ring I Spring Adapter Assy. Set J O-ring (Split)
More informationPressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Ship building Measurement and control technology
More informationIntrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F
Replacement product: Model IS-3 Electronic pressure measurement Intrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F WIKA data sheet PE
More informationAPPLICATION NOTE How to Deal with Electrical Noise and Interference in the Measuring Chain using a NEXUS
APPLICATION NOTE How to Deal with Electrical Noise and Interference in the Measuring Chain using a NEXUS Conditioning Amplifier by Claus Lindahl and Bernard Ginn, Brüel&Kjær When making vibration measurements,
More informationCoriolis Mass Flow Meter Model TM
Coriolis Mass Flow Meter for liquids and gas measuring monitoring analysing TM S5 Measuring range: 0-0.8 kg / h 0-65000 kg / h water Accuracy: ± 0.1 of reading ± zero-point stability (liquids) p max :
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationProcess-Controller HPP-25
Process-Controller HPP-25 Riveting process monitoring 6 different control parameters Touchscreen operation Windows diagnostics software... joining is our business Process-Controller HPP-25 Riveting process
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationZero Point Clamping. Index O-MAK 4. Component parts and accessories 8. Page. Fresmak Introduction 2-3. Product 4. Applications 5.
Zero Point Clamping Zero Point Clamping Index Page Fresmak Introduction 2-3 O-MAK 4 Product 4 Applications 5 Functioning 5 Features 6 Component parts and accessories 8 Cylinders 8 Nipples 8 Locking bolts
More informationRelative and absolute pressure transmitter type 528
Relative and absolute pressure transmitter type 528 Pressure range -1... 0 60 bar Váš dodavatel: JSP, s.r.o. Raisova 547 506 01 Jičín JSP Měření a regulace www.jsp.cz tel.: +420 493 760 811 fax: +420 493
More informationKeysight Technologies 87405C 100 MHz to 18 GHz Preamplifier. Technical Overview
Keysight Technologies 8745C 1 MHz to 18 GHz Preamplifier Technical Overview 2 Keysight 8745C 1 MHz to 18 GHz Preamplifier Technical Overview Introduction The Keysight Technologies, Inc. 8745C preamplifier
More informationLow Capacitance Probes Minimize Impact on Circuit Operation
Presented by TestEquity - www.testequity.com Low Capacitance Probes Minimize Impact on Circuit Operation Application Note Application Note Traditional Passive Probe Advantages Wide dynamic range Inexpensive
More informationFlush pressure transmitter For viscous and solids-containing media Model S-11
Electronic pressure measurement Flush pressure transmitter For viscous and solids-containing media Model S-11 WIKA data sheet PE 81.02 Applications Machine building Hydraulic aggregates General industrial
More informationWho Reads and Who Follows? What analytics tell us about the audience of academic blogging Chris Prosser Politics in
Who Reads and Who Follows? What analytics tell us about the audience of academic blogging Chris Prosser Politics in Spires @caprosser 1 What do we want to know about the audience for academic blogging?
More informationOEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted
Electrical temperature measurement OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted WIKA data sheet TE 60.31 further approvals see page 10 Applications Machine building, plant
More informationTYPE 3740/3740D WET/DRY RUNNING CARTRIDGE SPLIT SEAL
1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available
More informationSimplifying DC-DC Converter Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope APPLICATION NOTE
Simplifying DC-DC Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope Introduction DC-DC converters are widely used electronic components that convert
More informationVersatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY Torque range: from 6 up to 1 Nm Pistol models and angle models with flat angle head, 90 angle head,
More informationschoen + sandt machinery GmbH Lemberger Stra e 82 D Pirmasens Tel:
We introduce ourselves schoen + sandt machinery GmbH Lemberger Stra e 82 D-66955 Pirmasens Tel: +49 63 31 713 100 info@schoen-sandt.de Who we are We are a medium-sized company with approx. 200 employees
More informationPressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
More informationHigh-quality pressure transmitter For general industrial applications Model S-10
Electronic pressure measurement High-quality pressure transmitter For general industrial applications Model S-10 WIKA data sheet PE 81.01 for further approvals see page 4 Applications Machine building
More informationDUK. Ultrasonic Flowmeter/ -Monitor/-Counter/-Dosing Unit
Ultrasonic Flowmeter/ -Monitor/-Counter/-Dosing Unit measuring monitoring analysing DUK Measuring range: 0.08-0. - 630 L /min Accuracy: ±. % of F.S. Range span: 0 p max : 6 bar; t max : 90 C Connection:
More informationPressure transmitter with flameproof enclosure For applications in explosion-protected areas Models E-10 and E-11
Electronic pressure measurement Pressure transmitter with flameproof enclosure For applications in explosion-protected areas Models E-10 and E-11 WIKA data sheet PE 81.27 for further approvals see page
More information3D METAL PRINTING OF TOMORROW. Available Today.
3D METAL PRINTING OF TOMORROW Available Today. 3D METAL PRINTING FOR EVERYONE The ORLAS CREATOR is the first affordable 3D metal printing machine, specifically designed for small and medium businesses.
More informationFITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive
More informationCoriolis Massflowmeter
Coriolis Massflowmeter for liquids and gas measuring monitoring analysing Measuring range: 0-60 kg/h 0-60 000 kg/h water Accuracy: ±0,15 of reading ±zero-point stability pmax: PN40 tmax: -40 +180 C Connection:
More information