Section A Gear Box September A

Size: px
Start display at page:

Download "Section A Gear Box September A"

Transcription

1 Section A Gear Box September 06 1A

2 Index Gear Box Oil Pan Clutch Lever Assembly, See Page 9A for breakdown Clutch Cam, for all A machines prior to Serial # Clutch Cam, for all A machines new or converted Hex Head Socket Cap Screw (5/16- x 7/8"), for A machines prior to Serial # Flat Head Socket Cap Screw (5/16- x 1"), for A machines Serial #5 & up Hex Head Socket Cap Screw (10-4 x /4") Ball Bearing Stud Shaft Deck Hook Cam Lever X-Washer Pin X-Washer Pin Spirol Pin (1/4 x 1-1/") Spring Roller X-Washer (/) Deck Hook Cam Lever Assembly Pin (.495 x.8) Spring Tension Spring Bar Lever X-Washer (1/8) Flat Washer Lockwasher (/8) External Retaining Ring Washer Lockwasher (5/16) Tension Spring X-Washer Pin (7/8 x.7) Cap Screw Hex Socket (5/16- x 1-1/") 0. N.A. Hook Latch Lever Hex Head Cap Screw (/8-16 x 1-1/4") Hex Head Cap Screw (5/16- x 1-/4") Flat Washer - SAE (5/16) Shim (.010), brown U-Bolt Hex Head Socket Cap Screw (5/16- x 1-1/4") Gasket Hex Nut (5/16-) U-Bolt Block Hex Nut (/8-16) N.A. = No Longer Available Gear Box Assembly A September 06

3 LEFT SIDE VIEW OF TENSION SPRING MOUNTING LOCATION September 06 Gear Box Assembly A

4 Index Roll Pin (/16 x /8") Connecting Link (1/") (#40) Stop Collar Hex Head Socket Cap Screw (10- x 5/8") Plunger 6. N.A. Lever Assembly-See Note Bearing (.50 I.D. X.67 O.D.) Lever Assembly Sleve Oilite Bearing Flanged Bearing Clutch Reset Lever Shaft Spirol Pin (/16 x 1") 1. N.A. Clutch Reset Lever Assembly Clutch Lever Reset Assembly Reset Latch Assembly 16. N.A. Roll Pin X-Washer Pin X-Washer (1/8) Spirol Pin (1/4 x /8") Ball Bearing Washer Bearing (.504 I.D. X.689 O.D.) Bearing (.60 I.D. X.77 O.D.) 4. N.A. Spring Pin Flanged Oilite Bearing Clutch Reset Lever Assembly Ball Bearing Hex Nut (#10-) Lockwasher (#10) Spring Pin Spacer Hex Nut (#10-4) Flat Washer (1/4) Stripper Hex Head Socket Cap Screw (10-4 x 1") Roller Hex Head Cap Screw (10-4 x /4") Spring Wheel Rivet Pin X-Washer Pin Link Spring 4. N.A. Spring Post Rivet Pin Spiral Pin (/16 x /4") Spring Post Rivet Pin Clutch Reset Lever Assembly, for Model A Roller Roller Bearing (1/4 I.D. X 7/16 O.D.) X-Washer Pin (1/4 x 1-5/8") X-Washer (/) X-Washer Pin N.A. = No Longer Available NOTE: When replacing Lever Assembly on machines S/N prior to 9, order Lever Assembly plus each Spacers. Clutch Release Lever Assembly 4A September 06

5 September 06 5A Clutch Release Lever Assembly

6 Index Tension Spring Clutch Actuator Lever Flanged Bronze Bearing Spacer Spacer Tension Spring (Pkg. Of ) Out-of-Range Link Assembly Pin Link Hex Nut Flexlock (1/4-) Roller Roller Starter Bellcrank Assembly Starter Bellcrank Assembly Link Link Clutch Latch Clutch Latch X-Washer (1/8) Pin Roll Pin (/16 x 1") X-Washer Pin Clutch Actuator Link X-Washer (/) Roll Pin (/16 x /8") Flat Washer O-Ring Bearing (.50 I.D. X 1.18) Clutch Release Link Lockwasher (1/4) Washer Plunger Clutch Release Lever Assembly Tension Spring Spring Spacer O-Ring Pin Bearing (.505 I.D. X.69 O.D.) Out-of-Range Lever Assembly Stop Collar Bearing (.50 I.D. X.67 O.D.) Pin Pin Detector Link Spring Hex Jam Nut (1/4-) Roll Pin (/16 x 7/8") Tension Spring Lockwasher (#10) Lockwasher (5/16) X-Washer Pin X-Washer Pin Index Hex Head Cap Screw (8- x 9/16") X-Washer Pin Roll Pin (/16 x 1/") Bearing 49. N.A. Clutch Release Lever X-Washer Pin Hex Nut (5/16-) Special Hex Head Bolt Flat Allen Head Cap Screw Hex head Cap Screw (5/16- x 1-1/8") O-Ring Pin Roll Pin (1/4 x 1/") Roller Flat Washer (1/4) Roller Hi-Collar Lockwasher (#10) X-Washer Pin Spring Mounting Plate Mounting Plate Hex Head Socket Cap Screw (10- x 5/8") Spacer (1/4 x /8") Spacer (1/ x 1-1/16") Hex Nut (#8-) X-Washer Pin Hex Head Slotted Machine Screw (10- x /8") Hex Head Slotted Machine Screw (10- x 9/16") Flat Washer - SAE (#10) Cable Clamp (/8 X.59) Hex Head Slotted Cap Screw (8- x 5/8") Cover Solenoid, Guardian Type, 8-V, 60HZ Solenoid, Deltro Type, 8-V 60HZ Solenoid (5V) Solenoid Plunger, Gaurdian Type Solenoid Plunger, Deltro Type 79. N.A. Link, tubular, order N.A. Spring - See Note N.A. = No Longer Available NOTE: Please order the following: (1) , (1) , (1) and (1) Clutch Release Lever Assembly 6A September 06

7 September 06 7A Clutch Release Lever Assembly

8 Index External Retaining Ring Flat Washer (7/16) Clutch Shoe Pin Hex Jam Nut (1/4-8) Spring Guide Compression Spring Washer Flat Washer (1/) External Retaining Ring Hex Head Socket Cap Screw ( 1/" slotted) Special Hex Head Socket Cap Screw (1/4-8 x 4) 1. N.A. Clutch Lever Assembly Bushing Grip Ring Groove Pin Yoke & Bearing Assembly Sleve Oilite Bearing Spring Clutch Lever Support Kit Hex Head Slotted Machine Screw (1/4- x 1-1/4") Hex Nut (1/4-) Spacer Hex Nut (1/4-8) Pin Cotter Pin (1/16 x 1/") Ball Bearing Pin X-Washer Pin Pin Ball Bearing Flat Washer (#8) Locknut Clutch Lever Assembly N.A.= No Longer Available Gear Box Assembly 8A September 06

9 September 06 Gear Box Assembly 9A

10 Index :1 Worm Shaft :1 Worm Shaft (1 Pkg.) O-Ring Gear Box Housing Gasket Shim (.005" ) Shim (0.010") Spacer Oil Seal Bearing Retainer Spring Disc AFBMA Standard Lockwasher AFBMA Standard Locknut Compression Spring Clutch Drive Disc Clutch Pulley Assembly Clutch Bearing Assembly Clutch Pulley Assembly Clutch Drive Disc Drive Pin (1/4 x 7/8") Washer (5/) Hex Nut (/4-16) Rivet Advanced Performance Duty Clutch Face Kit Clutch Face Kit Rivet (/16-1/") Rivet (/16-/8") Advanced Performance Clutch Face Disc Clutch Face Kit Clutch Face Kit Worm Shaft Oil Leak Repair Kit Flange Nut (/4-16) Hex Head Socket Cap Screw (5/16- x 7/8") Flat Head Socket Cap Screw (5/16- x 1") Gear Box Drive Disc Clutch Face 10A September 06

11 Oil Leak Repair Kit Not Illustrated September 06 Gear Box Drive Disc Clutch Face A

12 Index :1 Worm Shaft :1 Worm Shaft (1 Pkg.) Ball Bearing Ball Ring & Roller Bearing Spacer Spacer Ball Bearing :1 Worm Shaft Assembly Gear Box Input Rebuilt Kit, See Note NOTE: Gear Box Input Rebuilt Kit includes: Clutch Shoe () Pin (1) Pin (1) Clutch Drive Disc (1) Clutch Drive Disc (1) Hex Head Socket Cap Screw (1) External Retaining Ring () Flat Washer (7/16") () Clutch Pulley Assembly (1) :1 Worm Shaft Assembly (1) Nut, Hex Jam () Worm Shaft 1A September 06

13 Rebuild Kit Not Illustrated Worm Shaft September 06 1A

14 Index :1 Worm Shaft, Assembly shown in :1 Worm Shaft (1 Pkg.) O-Ring Gear Box Housing Gasket Shim (.005" ) Shim (0.010") Spacer Oil Seal Bearing Retainer Spring Disc AFBMA Standard Lockwasher AFBMA Standard Locknut Compression Spring Clutch Drive Disc Clutch Pulley Assembly Clutch Bearing Assembly Clutch Drive Disc Drive Pin (1/4 x 7/8") Washer (5/) Hex Nut Flange Nut (/4-16) Spacer Clutch Bearing Assembly Bearing Retainer Clutch Pulley Assembly. N.A. Clutch Bearing Assembly, See Note Flexlock Hex Nut (#10-4) Flat Head Socket Cap Screw (10-4 x 5/8") N.A. = No Longer Available NOTE: Bearing Assembly for Clutch Pulley, includes: Clutch Bearing Assembly Clutch Bearing Sleeve Spacer Retainer Nylock Bearing Housing Wave Spring Clutch Pulley and Facing Only Worm Shaft 14A September 06

15 September 06 Worm Shaft A

16 Index O-Ring Ball Bearing Spacer Spacer Ball Ring & Roller Bearing Ball Bearing :1 Worm Shaft 8. N.A. 7:1 Worm & Worm Gear Conversion Kit :1 Worm Shaft (1 Pkg.) Set Screw (1/4- x 1/") Motor Pulley Assembly V-Belt (Motor to Gear Box) V-Belt (Motor to Gear Box) Worm Gear (7:1) Square Key. N.A. 7:1 Worm & Worm Gear Conversion Kit, A & Jet Back Rake Crank Housing Gasket Shim (.005), blue Shim (.010), brown Shim (.0), yellow Square Key O-Ring N.A. = No Longer Available NOTE: The 7:1 Component parts are NOT interchangeable with original 60:1 worm gear assemblies. Check Gear Box for 7:1 identification tag. Motor Belt & Pulley must be changed with conversion. Worm Shaft 16A September 06

17 September 06 Worm Shaft 17A

18 Index 1. N.A. Gear Box Core Only (see page A for breakdown) Hex Head Cap Screw (/8-16 x /4") Flat Washer (/8) Plate Flat Head Socket Cap Screw (/8-16 x 1-1/") Flat Washer (1/) Clutch Cam Lever Assembly Tension Spring Spring Roller X-Washer Pin X-Washer (/) External Retaining Ring Rake Crank Housing Gasket 14. N.A. Copper Gasket Hex Head Socket Cap Screw (5/16- x 1-1/4") Pin Ball Bearing Bearing Shaft Bearing Support Assembly Hex Head Cap Screw (/8-16 x 1-/8") Spacer (1/ x /8") Lockwasher (7/16) Hex Nut (7/16-) Spacer Cam Bearing (.477 I.D. X O.D.) Lockwasher (/8) Hex Nut (/8-16) Hex Head Socket Cap Screw (7/16- x -1/") Guard Hex Head Slotted Machine Screw (1/4- x 1/") Lockwasher (1/4) Sleve Oilite Bearing (.67 I.D. X.75 O.D.) External Retaining Ring Washer Pin N.A. = No Longer Available Gear Box Assembly A September 06

19 Gear Box Assembly September 06 A

20 Index Deck Hook U-Bolt Key Deck Lift Hook X-Washer Pin Pin (.495 x.8) Spring Roller Spring Eccentric Flat Washer - SAE (5/16) Hex Nut (5/16-4) Hex Jam Nut (5/16-4) X-Washer (/) X-Washer (1/8) Spiral Pin (5/16 x 1-5/8") Connecting Link 16. N.A. Bearing, order N.A. = No Longer Available Deck Lift Hook Assembly A September 06

21 Deck Lift Hook Assembly September 06 1A

22 Index Bracket Hex Head Cap Screw (1/4- x /4") Lockwasher (1/4) Oil Gauge-Plug Type Sight Gauge Oil Hole Cover Magnetic Plug Magnetic Plug (/4-14 x.8) Roll Pin - (.1 X 1-1/8"), See Note Roll Pin (1/4 x 1") Locating Pin 1. N.A. Gear Box Housing Assembly, See Note Gear Box Housing Assembly, See Note Stud, See Note Stud, See Note Stud Bearing (.8 I.D. X 1.00 O.D.) Flanged Oilite Bearing Sleve Oilite Bearing Sleve Oilite Bearing Plain Bearing Bearing (.67 I.D. X.75 O.D.) Drive Pin (5/16 x 1") Post Drive Pin (5/16 x /4"). N.A. Spring Post, for machines S/N prior to Pin 4. N.A. Spring Post, for machines S/N prior to Drive Pin (5/16 x 1-1/4") N.A. = No Longer Available NOTE 1: For machines S/N prior to 90. Order , for machines S/N 90 and up. NOTE : For machines S/N 90 and up. Order , for machines S/N prior to 90. Gear Box Housing Assembly A September 06

23 Gear Box Housing Assembly September 06 A

24 Index Flat Head Socket Cap Screw (/8-16 x 1") Washer Ball Bearing Spacer Gear Spacer Oil Seal R.H Gear Box Cover Gasket Gear Box Cover Gasket Retaining Bearing Ball Bearing Pipe Plug (1/-14 x.58 Max.) Oil Seal Oil Seal Hex Head Socket Cap Screw (5/16- x 7/8") Spacer Deck Lift Hook Cam, for machinese prior to 90, Cover O-Ring Deck Lift Crank Felt Pad O-Ring Deck Lift Hook Clamp Ring Hex Jam Nut (5/16-4") Eccentric Deck Hook U-Bolt O-Ring Spacer Flat Head Socket Cap Screw (1/4- x /4") Felt Wick. N.A. Felt Wick Flat Head Socket Cap Screw (5/16- x 1") Hex Head Socket Cap Screw (1/4- x /4") Flat Head Hex Socket Cap Screw (8- x /8") 6. N.A. Deck Lift Eccentric Square Key Flat Head Socket Cap Screw (1/4- x 1") Pin Deck Lift Hook Cam, for machines 90,000 and up N.A. = No Longer Available Deck Lift Crank Assembly For "A", "A" Converted to A- znd A- w/o Scotch Yoke 4A September 06

25 Deck Lift Crank Assembly For "A", "A" Converted to A- znd A- w/o Scotch Yoke September 06 5A

26 Index Bearing Block Hex Nut Nylock (/8-16) Grease Fitting Drive Spirolox Retaining Ring (1.8 I.D.) Roller Bearing (1 1/4 I.D. X 1 5/8 O.D.) Inner Ring Hex Nut (/8-16) U-Bolt Hex Jam Nut (1/-1) Stud External Retaining Ring Block Plate Assembly Spacer- Chamfered (1/16 I.D. x ") Bearing Stud Hex Head Socket Cap Screw (/8-4 x 1") Lockwasher (/8) Spacer Ball Ring & Roller Bearing Felt Wick Flat Head Socket Cap Screw (/8-16 x 1-1/4") T-Track. N.A. Oiler (Order 1 ea & 1 ea ) Hex Head Cap Screw (5/8- x 1-1/4") Washer Ball Bearing Roller Hex Head Socket Cap Screw (/8-16 x 1-1/4") Square Key Deck Link Adjusting Sleeve 1. N.A. Deck Link Connector. N.A. Deck Lowering Link Flat Head Socket Cap Screw (1/4- x 1") Flat Head Socket Cap Screw (1/4- x /4") Clamp Ring Felt Pad Deck Lift Crank Washer Flat Head Socket Cap Screw (/8-4 x 1") Spacer Deck Lift Hook Cam, for A machines 90,000 and up Deck Lift Hook Cam, for A machines prior to 90,000 N.A. = No Longer Available Deck Lift Eccentric Assembly For A- w/scotch Yoke Only 6A September 06

27 Deck Lift Eccentric Assembly For A- w/scotch Yoke Only September 06 7A

28 Index Hex Head Cap Screw (/8-16 x 1") Lockwasher (/8) Washer Ring Rake Cam Conversion Kit, for machines with Scotch Yoke Scissor & Moving Deck Cam Mounting Plate Bearing (.50 I.D. X.67 O.D.) Flanged Bronze Bearing X-Washer (/) Link Link Starter Bellcrank Assembly Starter Bellcrank Assembly X-Washer Pin X-Washer Pin X-Washer Pin Shaft Link Flanged Oilite Bearing Moving Deck Cam Lever Pulley Assembly Pin Pin Assembly Ball Bearing Scissor & Moving Deck Cam, for machines equipped with link Hex Head Socket Cap Screw (1/-1 x -1/4") Actuator Round Head Cross Res. W/ Ext. Tooth Lockwasher (10-4 x 1/") Hex Nut (#10-4) Flat Washer - SAE (#10) Lockwasher (#10) Hex Head Socket Cap Screw (10-4 x 1-/4") Hex Head Cap Screw (10-4 x 1-1/") Lockwasher (1/) Hex Nut (1/-1) Washer Lockwasher (5/8) Hex Head Socket Cap Screw Hex Head Cap Screw (5/16- x 1-1/4") Lockwasher (5/16) Special Hex Head Bolt Lockwasher (1/4) Washer Gear Box Assembly 8A September 06

29 September 06 Gear Box Assembly 9A

30 Index Scissor Hex Nut (1/-1) Washer Spacer Hex Head Socket Cap Screw (1/-1 x -1/4") Bearing (. I.D. X.495 O.D.) Stop Hex Head Socket Cap Screw (5/16- x /4") Link Adjusting Block Hex Jam Nut (5/16-4) Roll Pin (1/4 x 1/") Latch & Bearing Assembly Sleve Oilite Bearing Latch Stud 16. N.A. Hex Head Latch Stud, See Note Hex Head Socket Cap Screw (5/16- x 7/8") Hex Head Cap Screw (5/16- x /4") Flat Washer - SAE (5/16) Hex Nut Nylock (5/16-) Idler Gear Bearing, single (.474 ID X OD) Inverted Internal Retaining Ring Flat Head Socket Cap Screw (1/4- x 1-/4") Stud Hex Nut Nylock (1/4-) Flat Washer (1/4) Mounting Plate Flanged Oilite Bearing Cam Lever Link X-Washer Pin X Washer (5/) Grease Fitting Drive Ball Bearing Hex Head Cap Screw (10-4 x 1-1/") Flanged Oilite Bearing Lockwasher (#10) Pin Assembly Spring Roller X-Washer Pin (7/8 x.7) X-Washer (/) N.A. = No Longer Available NOTE: The Hex Head Latch Stud is no longer available. Order , , and Gear Box Assembly 0A September 06

31 FOR MACHINES EQUIPPED WITH A HEX HEAD LATCH STUD Gear Box Assembly September 06 1A

32 Index Hex Head Cap Screw (/8-16 x 4") Mounting Strap Pivot Spacer Flanged Oilite Bearing Bell Crank Assembly Hex Nut Nylock (1/4-) Washer Stud Hex Socket Head Cap Screw (5/16- x -1/") 9. N.A. Spacer Plate Flat Washer - SAE (5/16) Spacer Hex Socket Head Cap Screw (5/16- x -1/") Hex Head Cap Screw (10-4 x 1-1/4") Bumper Spacer X-Washer Pin Stud Plate Hex Washer Self Tapping Screw (10-4 x 5/8") Retainer Spacer Grip Ring (.50 SHAFT DIA.) Tension Spring Latch Flat Washer - SAE (#10) Hex Nut Nylock (#10-4) Tension Spring Clip X-Washer (1/8) X-Washer Pin Hex Nut Nylock (/8-16) N.A. = No Longer Available Deck and Turret Jam Protection Kit A September 06

33 September 06 Deck and Turret Jam Protection Kit A

34 Index Rake Cam Conversion Kit Scissor & Moving Deck Cam, for machines equipped with Scotch Yoke Rake Cam Hub Scissor & Moving Deck Cam, for machinesequipped with link Tension Spring Ball Bearing Square Key Rectangular Key Shaft Square Key O-Ring L.H. Gear Box Cover Gasket 1. N.A. Cover & Pin Only Pipe Plug (1/-14 x.58 Max.) Oil Seal Extended Cycle Cam Mounting Plate Cam Spacer Drive Gear Spur Gear Hex Head Socket Cap Screw (5/16- x 1") Lockwasher (5/16") Washer Hex Head Socket Cap Screw (1/4- x /4") Bearing Retainer Hex Head Socket Cap Screw (5/16- x 7/8") Flat Head Socket Cap Screw (/8-16 x 1-1/4") Spacer Tension Spring N.A. = No longer Available Gear Box Cover Assembly 4A September 06

35 September 06 Gear Box Cover Assembly 5A

36 Index Cable & Tube Assembly Ball Bearing Bearing Retainer Flat Head Socket Cap Screw (10-4 x /4") Worm Sheel (60:1) Spur Gear Spacer O-Ring Square Key Crank Shaft Shim (.005), blue Shim (.010), brown Shim (.0), yellow Bumper Button Rake Crank Housing Support Plate Ball Bearing Spacer Square Key Washer Flat Head Socket Cap Screw (/8-16 x 1") Lockwasher (/8) Hex Nut (/8-16) Crank X-Washer Pin Hex Head Socket Cap Screw (/8-16 x ") Hex Nut (1/-1) Lockwasher (1/) Hex Head Socket Cap Screw (1/-1 x -/4") Hex Head Cap Screw (5/16- x 1") Lockwasher (5/16) Hex Head Cap Screw (5/16- x /4") Hex Nut (5/16-) Hex Jam Nut (1/4-) Pin Gear Box 4:1 Assembly 6A September 06

37 September 06 Gear Box 4:1 Assembly 7A

38 Index Bumper Adapter. N.A. Bearing Cap Flat Head Socket Cap Screw (5/16- x 1") Ball Bearing 5. N.A. Bearing Housing Shim (.00), coral Shim (.0), yellow Shim (.010), brown Shim (.00), red Oil Seal O-Ring Cable & Tube Assembly Spring Tube Keps Nut (5/16-) Hex Nut (5/16-) Lockwasher (5/16) Moving Deck Cable Assembly 1. N.A. Spring Tube, See Note Hex Head Cap Screw (5/16- x /4") Support Plate Assembly Flat Washer (7/16) Square Key Shaft & Spacer O-Ring Hex Head Cap Screw (/8-4 x /8") Gasket Spacer O-Ring. N.A. Housing & Sleeve Assembly Sleeve Pin Spring Pin Expansion Plug (1-1/8) 8. N.A. Rake Crank Housing, only Bumper Button Hex Jam Nut (1/4-) Plunger. N.A. Time Delay Stem (/8-4). N.A. Time Delay Stem (7/16-) Actuator Pin Switch Switch Actuator Pin X-Washer (1/8) Flat Washer (1/4) Spring Spring Compression Spring Compression Spring Clip N.A. = No Longer Available NOTE: When replacing Spring Tube, order (1) , (1) , (1) , (1) , and (1) Gear Box Cover Assembly 8A September 06

39 September 06 9A Gear Box Cover Assembly

40 Index 1. N.A. Pkg. A- Gear Box Shipping Assembly Rebuilt N.A. Pkg. Gear Box Assembly - Rebuilt Model A. N.A. Gear Box Cover Assembly Gear Box Cover Assembly. N.A. Detector Assembly N.A. Detector Assembly & Hardware (1 Pkg.) N.A. Detector Assembly, rebuilt for Model A Rake Crank Assembly N.A. Rebuilt Rake Crank Housing Guard Assembly - Double Outside Deck Lift Crank Eccentric Assembly & Hardware N.A. Rebuilt :1 A Gear Box Housing Assembly N.A. = No Longer Available Gear Box/Detector Assembly 40A September 06

41 Gear Box/Detector Assembly September 06 41A

Service Parts Catalog. A-2 Pinsetter. December 2017 / December

Service Parts Catalog. A-2 Pinsetter. December 2017 / December Service Parts Catalog A-2 Pinsetter December 2017 / 12-902908-000 December 2017 1 A-2 Pinsetter Service Parts Catalog December 2017 by the Brunswick Bowling Products. All rights reserved. Reorder Part

More information

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins

More information

Section F SETTING TABLE

Section F SETTING TABLE Section F SETTING TABLE December 2009 1F Index No. Part No. Description 1. 47-051635-001 Geared Rack 2. 11-051880-001 N.A. Truss Hd. Machine Screw (6 mm x 16 mm) 47-861008-001 R.O. Truss Hd. Machine Screw

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS

More information

HYDRAULIC CONTROL DETAILS PARTS LIST

HYDRAULIC CONTROL DETAILS PARTS LIST Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank

More information

Section J DISTRIBUTOR

Section J DISTRIBUTOR Section J DISTRIBUTOR 1J 1. 47-094344-003 Front Pulley Shaft 2. 47-091905-003 Turn Plate (right-hand) 3. 11-051038-001 Hex Hd. Cap Screw (8 mm x 16 mm) 4. N.A. Distributor Frame Complete 5. 47-090547-004

More information

Section J DISTRIBUTOR

Section J DISTRIBUTOR Section J DISTRIBUTOR December 2009 1J Index No. Part No. Description 1. 47-094344-003 Front Pulley Shaft 2. 47-091905-003 R.H. Turn Plate 3. 11-051038-001 Hex Hd. Cap Screw (8 mm x 16 mm) 4. N.A. Distributor

More information

Section A December 2009

Section A December 2009 Section A ELEVATOR December 2009 1A Index 1. 47-011053-004 Deflection Chain Gear w/bearing Complete 2. 11-051772-001 Lockwasher (12 mm) 3. 47-011130-004 Bearing Bolt 4. 47-011245-003 Lower Chain Guide

More information

MMZ jr Hydrostatic Zero-Turn Riding Mower

MMZ jr Hydrostatic Zero-Turn Riding Mower MMZ jr. Hydrostatic Zero-Turn Riding Mower MODEL ABM HP " Stamped Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS " Cutter Deck............................. and " Spindle Assembly.........................

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7

More information

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in

More information

EEBR312A Brake Lathes Parts Identification

EEBR312A Brake Lathes Parts Identification EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference

More information

Section E SWEEP WAGON

Section E SWEEP WAGON Section E SWEEP WAGON 1E 2E Index No. Part No. Description 1. 47-042058-002 Sweep Wagon Frame with Leaf Springs N.A. Sweep Wagon Frame without Leaf Springs 2. 47-041769-003 Sweep Board Only (brown for

More information

Illustrated Pats List

Illustrated Pats List Illustrated Pats List Automatic Lawn Tractor Models 0 0 0 Model 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should

More information

ST927E Spare Parts

ST927E Spare Parts ST927E 1.1997 Spare Parts ELECTRIC START ASSEMBLY 8 9 7 6 ENGINE 6 601 00 15-88 MOTOR, STARTER 7 601 00 15-89 SCREW, 1/4-20X.50 8 601 00 15-90 SCREW, #6-32X2.50 9 601 00 15-91 CORD, STARTER 10 601 00 21-61

More information

32 FRONT DECK ASSEMBLY

32 FRONT DECK ASSEMBLY 3 6 K 2 0 PARTS MANUAL 32 FRONT DECK ASSEMBLY 3 1 2 Belt Shield Prior to SN 33333 4 6 21 22 7 24 2 26 14 8 13 12 9 10 11 27 2 28 1 16 2 19 17 30 36 39 39 37 29 60 62 61 3 9 49 41 40 28 48 42 13 43 44 47

More information

Di-Acro 18E Stylus Turret Punch Press

Di-Acro 18E Stylus Turret Punch Press OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of

More information

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar

More information

INDEX. 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts Pulleys, Blades, Belts, Spindles and Attaching Parts...

INDEX. 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts Pulleys, Blades, Belts, Spindles and Attaching Parts... R Ingersoll HOME TRACTORS 52SD, 62SD and 72SD INDEX 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts... 3 Pulleys, Blades, Belts, Spindles and Attaching Parts... 5 62SD Mower Deck

More information

Illustrated Parts List

Illustrated Parts List Illustrated Parts List Rear Tine Tiller Model Series 0 Thru Model Series 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine

More information

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise

More information

Main Drive Components

Main Drive Components Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor

More information

Section D ACCELERATOR

Section D ACCELERATOR Section D ACCELERATOR December 2009 1D Index 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm) 4. 47-021249-004 Ball Cushion

More information

SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130

More information

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000 FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR

More information

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

Illustrated Parts: Model 853

Illustrated Parts: Model 853 Illustrated Parts: Model 853 BCS America LLC 5001 N Lagoon Ave Portland, OR 97217 Revised 09/20/2017 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Bumper Accessories ------ - 823956 01.00 800.010-01.3

More information

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort

More information

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model: , 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.

More information

PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V

PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL

More information

Parts Catalog. S-Series Slicer Smart Manual SG13. Model:

Parts Catalog. S-Series Slicer Smart Manual SG13. Model: , 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE

More information

Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252

Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Professional Quality Lawn Care Equipment since 1945 THIS MANUAL INCLUDES UPDATES ON PAGES 6,10, & 20. Yazoo/Kees Power Equipment policy is to improve

More information

Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2

Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2 Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73

More information

Film-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.

Film-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema

More information

DIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part #

DIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part # DIAMOND P R O D U C T S EARLY ENTRY CONCRETE SAW PARTS LIST MODEL CC1900 (March 2012) Part #1801617 (Intentionally Blank) TABLE OF CONTENTS Description Page No. Frame Assembly....4-5 Engine Assembly......6

More information

Parts Manual. English

Parts Manual. English Parts Manual WHF4817 / 966947005 WHF3617 / 966947008 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2009 HTC. All rights reserved.

More information

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,

More information

Section D ACCELERATOR

Section D ACCELERATOR Section D ACCELERATOR 1D Index No. Part No. Description 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm x 21 mm x 2 mm) 4.

More information

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.

More information

Illustrated Parts Manual

Illustrated Parts Manual Illustrated Parts Manual Mustang Series RZT TROY-BILT LLC, P.O. BOX CLEVELAND, OHIO -00 Printed In USA Form No. -0 (December, 0) To The Owner Thank You Thank you for purchasing an MTD Zero-Turn Tractor.

More information

ATTACHMENT APPLICATION CHART

ATTACHMENT APPLICATION CHART R Ingersoll RM42Y2, RM44YR2 MOWERS SB38Y2 SNOWCASTER UB38Y2 UTILITY BLADE BG42Y2 BAGGER Parts Catalog 8-3280 INDEX PAINT GENERAL INFO 2014 Tractor with RM42Y2 Mower and BG42Y2 Bagger ATTACHMENT APPLICATION

More information

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP

More information

Hydrostatic Zero-Turn Commercial Riding Mower

Hydrostatic Zero-Turn Commercial Riding Mower Hydrostatic Zero-Turn Commercial Riding Mower Turf Equipment MODEL 20HP Enforcer 44 22HP Enforcer 48 23HP Enforcer 54 ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly..................................

More information

Parts List: Head Assembly

Parts List: Head Assembly Head Assembly 23 Parts List: Head Assembly Index No. Part No. Description Size Qty 1...JWP15H-001... Head Casting......1 2...TS-1525021... Set Screw... M10x12...8...JWP15DX-CA... Cutter Head Assembly (Index

More information

DIAMOND REAR PIVOT SAW PARTS LIST MODEL CC6160D P R O D U C T S. (September 2005) Part #

DIAMOND REAR PIVOT SAW PARTS LIST MODEL CC6160D P R O D U C T S. (September 2005) Part # DIAMOND P R O D U C T S REAR PIVOT SAW PARTS LIST MODEL CCD (September 00) Part #00 Intentionally Blank Table of Contents. Frame Upright Assembly.... Instrument Panel Assembly.... Speed Control Assembly....

More information

00238 R4 BODY, BOLT ON TORQUE TUBE PRODUCT LINE: 916/18 DATE: 12/4/06

00238 R4 BODY, BOLT ON TORQUE TUBE PRODUCT LINE: 916/18 DATE: 12/4/06 0 0 SH CAP SCREW, /-0 NC X / G PLAIN 00 NUT, NYLOCK, /-0 NC ZINC 00 HH CAP SCREW, /- NC X G ZINC 0 O-RING, -N0, -/ OD X / SECTION 00 WHEEL DRIVE MOTOR WITH KEY 0 00 GEAR, WHEEL DRIVE MOTOR 0 WASHER, /

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS HL300 SERIES LEGACY MIXER ML-134351 ML-134358 ML-141097 HL300 HL300C HL300 (Canada) A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43136 Rev. C (July 2017)

More information

CONCRETE SAW PARTS LIST

CONCRETE SAW PARTS LIST CONCRETE SAW PARTS LIST MODEL CCXL-EE December 01 Part # 1 Intentionally Blank Table of Contents Description Page No. Frame Assembly... Carriage Assembly Motor Assembly.... Blade Shaft Assembly... Spring

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

Table of Contents. Section C : Center Drive Assembly. Section C. Call or Northwest Tillers today

Table of Contents. Section C : Center Drive Assembly. Section C. Call or  Northwest Tillers today Table of Contents Section C Section C : Center Drive Assembly Heavy Duty Center Drive Assembly... C1-C2 Heavy Duty Drive Shaft Assembly... C3 D Dual Drive Shaft Assembly... C4 Standard Duty Drive Housing

More information

SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4

More information

HR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front

HR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front HRTS Rotary Rake Serial Numbers less than 00 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Page Tongue Front Frame Front Axle Curtain & Guards, Front Front Pivot Bridge

More information

Parts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) &

Parts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) & Parts Manual Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) 1740273 & 1740275 11.2006 Table Of Contents PRODUCT COMPONENTS PAGES Handle Group... 4 Engine Group... 6 Frame Group... 8 Auger Housing

More information

PARTS G9729 Lathe Bed

PARTS G9729 Lathe Bed PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131

More information

BASE, COLUMN, ARM AND TABLE

BASE, COLUMN, ARM AND TABLE SPARE S LIST Item No. 700000 Article No. 84-2265 IMPORTANT INSTRUCTIONS It is most important that the above illustration be studied prior to the assembly of the saw blade and arbor or the assembly of the

More information

Section P LUSTRE KING

Section P LUSTRE KING Section P LUSTRE KING 1P Index 1. 14-400068-000 Spacer 2. Guard Assembly 3. 11-001193-001 Hex Hd. Cap Screw (1/4-20 x 2-1/4") 4. 11-001180-001 Hex Hd. Cap Screw (1/4-20 x 5/8") 5. Upper Baffle 6. Front

More information

2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A.

2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A. Parts Manual LZ22 / 9687901 LZ227 / 968999674 LZ60 / 96899967 LZ7230 / 968999676 LZ6127 / 968999709 Please read the operator s manual carefully and make sure you understand the instructions before using

More information

Sno-Thro. Parts Manual

Sno-Thro. Parts Manual Sno-Thro Parts Manual Models 00 - STDLE 00 - ST7LE 00 - ST0DLE 007 - STLET 00 - ST7LET 00 - ST0LET 00 - STE 0 - ST07LE 0 - STLET 0 - ST07LET 000 /0 Printed in USA THE MANUAL Before you operate your unit,

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART R Ingersoll HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog 8-3091 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO INDEX Deck. Belt and Idler Pulley...5 Mounting Bracket...7 Rear Wheels...7 Hydraulic Drive...9-13

More information

12. Mechanical Drawings & Parts Breakdown List

12. Mechanical Drawings & Parts Breakdown List 12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS HS4N SLICER ML-136338 HS4N A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43311 (August 2015) F-43311 (August 2015) - 2 - HOBART 2015 Table of Contents

More information

Rotary Mower L47, M47, N47, RM44YR Parts Catalog

Rotary Mower L47, M47, N47, RM44YR Parts Catalog R Ingersoll Rotary Mower L47, M47, N47, RM44YR Parts Catalog 8-2711 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO ALPHABETICAL Axle... 9 Bearings, Spindles... 11-13 Belts... 5-7 Blades... 11-13 Bracket,

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS HL400 SERIES LEGACY MIXER ML-134348 ML-134359 ML-141096 HL400 HL400C HL400 (Canada) A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43137 Rev. A (May 2016)

More information

Parts Manual SPEEDZTR 42 / SPEEDZTR 42BF / SPEEDZTR 46BF / SPEEDZTR 48BF / SPEEDZTR 54BF /

Parts Manual SPEEDZTR 42 / SPEEDZTR 42BF / SPEEDZTR 46BF / SPEEDZTR 48BF / SPEEDZTR 54BF / Parts Manual SPEEDZTR 42 / 6603801 SPEEDZTR 42BF / 66054201 SPEEDZTR 46BF / 658831 SPEEDZTR 48BF / 65883501 SPEEDZTR 54BF / 65883201 Please read the operator s manual carefully and make sure you understand

More information

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List. 25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1

More information

Parts Catalog MIXERS

Parts Catalog MIXERS Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River

More information

Table of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or Northwest Tillers today

Table of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or  Northwest Tillers today Table of Contents Section H Section H : Gauge Wheels & Mesh Roller 6½ Gauge Wheel (SRB4098)... H1 9½ Gauge Wheel (SRB4099)... H2 6½ & 9½ Gauge Wheel Hubs... H3 Heavy Duty Gauge Wheel (SRB4070 & SRB4076)...

More information

Parts Manual SPDZTR 42 / SPDZTR 42 BF /

Parts Manual SPDZTR 42 / SPDZTR 42 BF / Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to

More information

SECTION 8: PARTS Main Parts Breakdown

SECTION 8: PARTS Main Parts Breakdown SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92

More information

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS HL800 & HL1400 SERIES LEGACY MIXERS ML-134354 ML-134355 ML-134334 ML-134337 ML-134361 HL800 HL800C HL1400 HL1400C HL1400N PRIOR MLS COVERED IN THIS MANUAL ML-134300 ML-134306

More information

GEAR HEAD METAL LATHE

GEAR HEAD METAL LATHE GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF

More information

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016

More information

SECTION 9: PARTS Main

SECTION 9: PARTS Main SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21

More information

SECTION 9: PARTS Headstock Case and Shift

SECTION 9: PARTS Headstock Case and Shift SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709

More information

HD38, HD58, HD78 REV

HD38, HD58, HD78 REV HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869

More information

Disc, Belt, and Combination Disc/Belt Sanders

Disc, Belt, and Combination Disc/Belt Sanders This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc

More information

Parts Catalog Collector 34 Model Gasoline

Parts Catalog Collector 34 Model Gasoline Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1

More information

/ iz4218kaa / iz4818kaa / iz4821kaa / iz5223kaa / iz5223koa MANUAL NO REV.

/ iz4218kaa / iz4818kaa / iz4821kaa / iz5223kaa / iz5223koa MANUAL NO REV. Parts manual Models: 6804 / iz418kaa 6805 / iz4818kaa 6806 / iz481kaa 6807 / iz53kaa 6808 / iz53koa MANUAL NO. 531070 REV. 05 (08/18/04) MODEL NUMBER SERIAL NUMBER DATE PURCHASED DEALER ADDRESS NOTES:

More information

MODELS: CC3730TE / CC3740TE

MODELS: CC3730TE / CC3740TE DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODELS: CC0TE / CC0TE February 00 Part #00 Table of Contents Pictorial Page Index....., Belt Guard Assembly... Controls Legend....... Belt Tensioner Assembly....

More information

FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH

FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on

More information

CAPX Installation Print 4/10/ CAB ASSEMBLY Part Pos Description Quantity Foot Notes CAB SECTION PLATE, MO

CAPX Installation Print 4/10/ CAB ASSEMBLY Part Pos Description Quantity Foot Notes CAB SECTION PLATE, MO CAPX Installation Print 4/10/2019 6245100014 CAB ASSEMBLY Part Pos Description Quantity Foot Notes 6245100008 1 CAB SECTION 1 + 6705100023 2 PLATE, MOUNTING 1 6705012439 3 PLATE, MOUNTING 1 6326100000

More information

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026

More information

3850, Drum & Disc Brake Lathes. Parts Identification

3850, Drum & Disc Brake Lathes. Parts Identification 3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for

More information

Square Wheel Belt Grinder Models: 4103, 4106, and 4126AC

Square Wheel Belt Grinder Models: 4103, 4106, and 4126AC This Manual is Bookmarked Operating Instructions Parts Manual Square Wheel Belt Grinder Models: 4103, 4106, and 4126AC WHM TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Ph.: 800-274-6848 www.wmhtoolgroup.com

More information

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1

More information

ECOLAWN APPLICATOR PARTS LIST. Model ECO-100. Rev

ECOLAWN APPLICATOR PARTS LIST. Model ECO-100. Rev ECOLAWN APPLICATOR PARTS LIST Rev. 04-09- -- Sub-Assemblies Diagram 9 0 5 5 8 7 4 6 4 A-000 MAIN FRAME A-000 STEERING COLUMN ASSEMBLY A-000 MAIN DRIVE SHAFT ASSEMBLY 4 A-0004 DIFFERENTIAL ASSEMBLY 5 A-0005

More information

For Serial No & Higher MANUAL NO REV. 04 (09/15/04)

For Serial No & Higher MANUAL NO REV. 04 (09/15/04) Parts manual Models: 606 / iz1kaa 60 / iz53kaa 60 / iz53koa 6 / iz1skaa 630 / iz1skaa 631 / iz1kaa 635 / iz613kaa For Serial No. 033600000 & Higher MANUAL NO. 53106 REV. 0 (0/15/0) MODEL NUMBER SERIAL

More information

Figure 1A. Solid Waste Can / Glass Shredder Assembly

Figure 1A. Solid Waste Can / Glass Shredder Assembly Figure A. Solid Waste Can / Glass Shredder Assembly Figure B. Solid Waste Mod Plastics Shredder Assembly Solid Waste Can / Glass Shredder & Solid Waste Mod. I Plastics Shredder Assemblies FIG. INDEX PART

More information

EXCERPT FROM THE Jobsite saw OWNERS MANUAL

EXCERPT FROM THE Jobsite saw OWNERS MANUAL Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel

More information

PARTS MANUAL.

PARTS MANUAL. www.mkdiamond.com MK-00 Electric Block Saw PARTS MANUAL MODELS P/N MK-00S Block Saw Single-Phase 0Hz/0V 0 MK-00T Block Saw -Phase 0Hz/0V 0 MK-00T Block Saw -Phase 0Hz/0V 07 Revision 00 0.08 Manual Part#

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS 3000 SERIES AUTOMATIC SLICERS 3713 ML-136144 3713 (Canada) ML-136177 3713N ML-136181 3713N (Canada) ML-136184 3913 ML-136145 3913 (Canada) ML-136179 3913N ML-136183 3913N (Canada)

More information

6000, Heavy Duty Drum/Disc Lathe. Parts Identification

6000, Heavy Duty Drum/Disc Lathe. Parts Identification 6000, 6002 Heavy Duty Drum/Disc Lathe Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for

More information

63601 PARTS LIST ILLUS NO. PART NO. DESCRIPTION QTY.

63601 PARTS LIST ILLUS NO. PART NO. DESCRIPTION QTY. 63601 PARTS LIST DRAWING NO. 1 1 W-A63601730 Right Cover 1 M-O63601150 Right Hand Insulation 1 2 W-A63601735 Left Cover 1 M-O63601149 Left Hand Insulation 1 3 M-S63601080 48XLO50 Belt 1 4 M-S63601081 Motor

More information

Walk-Behind Lawn Mowers

Walk-Behind Lawn Mowers Walk-Behind Lawn Mowers Parts Manual Models 2 - PRO21SCH 12 - LM21 1 - LM21S 1 - LM21SW 1 - LM21S 11 - PRO21SCH 0 - LM21SW - LM21S - LM21SW 5 - LM21S - LM21SW 0700 /0 Printed in USA THE MANUAL Before you

More information

Parts Manual TF Band Sawing Machine

Parts Manual TF Band Sawing Machine Parts Manual TF-2525 Serial No: 356-07283 to Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning

More information