Spare Bits and Bit Holders for Circle Cutters

Size: px

Start display at page:

Download "Spare Bits and Bit Holders for Circle Cutters"

Anastasia Deborah Hardy
5 years ago
Views:

1 19015 Adjustabe Circe Cutters Cutting Toos Circe cutter with 1 obique bit HSS-E and additiona bit hoders for straight bits (no draw cuts), cutting speed for HSS-E bits approx m/min. (stee and iron sheeting), for carbide bits approx m/min. For use in fixed driing machines. For cutting out borehoes, discs and rings, in sheeting made of stee, iron, brass and auminium with a max. thickness of 5, from one side. For machining seaing materia, rubber, eather, Pexigas, with a max. thickness of 30, as we as composites. Note: Do not use in high-speed machines! Not for use with wood! Liiput, cutting range 18-80, shank Ø , cutting range , shank Ø , cutting range , shank MT , cutting range , shank MT a, cutting range , shank MT Cutting Shank Ø range Ø MT Liiput a Spare Bits and Bit Hoders for Circe Cutters Suitabe for type Liiput a 00 a Bit, with draw cuts, for sheet meta up to 5, stee, non-ferrous or ight meta, made of HSS-E. Bit, obique, for meta up to 5, with carbide tip Additiona bit hoder, for obique bits end-no. 101 and Bits, for seaing materia, pastic sheets, rubber, eather with a max. thickness of approx. 10, made of HSS-E Bit, for pastics up to approx. 30, and Novotex, Pertinax, Pexigas etc., made of HSS-E. Bit, for pastics up to approx. 30, and Novotex, Pertinax, Pexigas etc., carbide-tipped Additiona bit hoder, for straight bits end-no. 105, 106 and Spare bits, reinforced mode for sheet meta with a max. thickness of and borehoes from approx. 34 approx. 150 Ø, made of HSS-E Specia bit hoder, for reinforced HSS-E bits end-no Cooant Taps With permanent magnet 260 N, fexibe tube 300 ong, with finey adjustabe stopcock. Hose couping R1/4 inch and/or pipe socket LW 8, arge diameters 69, height 110. The cooant tap can be attached anywhere on the machine too or directy on the workpiece. Cooant or compressed air can be directy appied to wherever it is required

2 Cooant tubes Lubricants Track ois Cutting paste Cutting oi E For shortening and extending as required. Vibration-resistant, remains in position. Corrosionproof and resistant to chemicas and sovents. Easiy exchangeabe nozzes, junctions, and screw connectors. Fexibe Pastic Cooant Tubes /4 inch set, 29-part, in pastic box /2 inch set, 33-part, in pastic box /4 inch set, 6-part /4 inch singe eements /2 inch set, 6-part /2 inch singe eements 1/4 inch Set and singe parts Pack consists of: 280 tube 1 ea. round nozze Ø 1,5 / 3 and 6 1 ea. connection thread NPT 1/8 inch and 1/4 inch tubes of approx ,5 m tube (55 pieces of 140 ) pack with 4 connection threads NPT 1/8 inch pack with 4 connection threads NPT 1/4 inch pack of 4 round nozze Ø 1, pack of 4 round nozze Ø 3, pack of 4 round nozze Ø 6, pack of 2 fat nozzes 25 x 0, pack with 2 joint nozzes Ø 1 x pack consists of: 1 ea. fat nozze 12 x 1,0 and 12 x 1,5 1 ea. nozze 5 x Ø 1,5 and 7 x Ø 1, pack with 2 Y-junctions pack of 4 extension je 95 with camping ring ring system with 15 radia nozzes pack of 2 return vaves pack with 2 ocking taps with externa thread 1/4 inch pack of 2 ocking tap with segment connector assemby piers for fixing and oosening the joints 145 1/2 inch Set and singe parts Pack consists of: 280 tube 1 ea. round nozze Ø 6 / 9 and 12 1 ea. connection thread NPT 3/8 inch and 1/2 inch tubes of approx ,5 m tube (59 pieces of 140 ) pack with 4 connection threads NPT 3/8 inch pack with 4 connection threads NPT 1/2 inch pack of 4 round nozze Ø pack of 4 round nozze Ø pack of 4 round nozze Ø pack of 2 fat nozzes 32 x 4, pack of 2 fat nozzes 63 x 2, pack consists of: 1 ea. fat nozze 18 x 2,0 and 18 x 3,2 1 ea. nozze 7 x Ø 2,0 and 5 x Ø 3, pack consists of: 1 ea. 90 nozze Ø 6 / 9 and nozze pack with 2 Y-junctions pack with 2 adapters to 1/4 inch pack with 2 Y-junctions with adapter to 1/4 inch pack of 4 extension 95 with camping ring ring system with 15 radia nozzes pack of 2 return vaves pack with 2 ocking taps with externa thread 1/2 inch pack of 2 ocking tap with segment connector assemby piers for fixing and oosening the joints Set 1/4 inch set 101 1/2 inch set Contents of 1/4 inch set 8 tube pieces of 90 3 thread nippes NPT 1/8 inch 3 thread nippes NPT 1/4 inch 3 round nozzes Ø 1,5 3 round nozzes Ø 3,0 3 round nozzes Ø 6,0 1 nozze 5 x Ø 1,5 1 nozze 7 x Ø 1,0 1 fat nozze 25 x 0,8 1 ocking tap with segment connector 1 Y-junction 1 assemby piers Contents of 1/2 inch set 6 tube pieces of thread nippes NPT 3/8 inch 4 thread nippes NPT 1/2 inch 2 round nozzes Ø 6 2 round nozzes Ø 9 2 round nozzes Ø nozze Ø nozze Ø 12 2 fat nozzes 32 x 4,2 2 fat nozzes 63 x 2,8 1 ocking tap with segment connector 2 extension pieces à 95 2 camping rings 1 Y-junction 1 assemby piers

3 19300 Cooing Lubricant Cooing and machining ubricant with high corrosion protection and EP additives, satisfies the highest requirements. Semi-transparent emusion (minera oi: 40 %). Longer service ife compared to standard cooing and machining ubricants. Adapted to HHW track ois 68 and 220 (demusifying). Very to gente the skin, ph at 5 % approx. 9,3. Not a hazardous substance, does not contain chorine, nitride or formadehyde. Very good corrosion protection even at ower concentrations (starting at 3 %). The grease fim is consistent at the cutting toos even at high oads in moecuar strength. Refractometer vaue 1,3. Water contaminant cass 2. Long-asting foam, very we suited for high-pressure CNC machines. Suitabe for a materias. Aso very suitabe for high-strength stee and internay cooed toos. Especiay suitabe for machining non-ferrous Cutting Toos metas. 1:25 (4 %) for ight-duty machining up to 1:10 (10 %) for very heavy-duty machining Contents Track Ois Adapted to HHW cooing ubricants, demusifying, therefore it cannot be mixed with the emusion. No sticky residues on the guideways, consideraby extends the service ife of the emusion. Specia additives prevent the jerky giding of machine too tabes and guides and guarantee constant giding even when working with very ow feed rates. Therefore, an exact positioning of the toos and/or the workpiece are made possibe. Demusifying specia oi for tracks and guides. Aso suitabe as hydrauic oi in compiance with DIN 51524/2 and transmission oi Contents Kinematic Density Fash point viscosity at 15 C C , , For heavy-duty machining and for chip remova. Thread cutting, centering, machining keyways and reaming with reamers. range: High-aoyed carbon stee, chrome-nicke aoys, VA, austenitic, ferritic chrome-nicke stee, titanium, manganese, cast stee, grey cast iron, maeabe cast iron etc. Stainess Stee Lubricating Sticks/Cutting Pastes Lubricating sticks Especiay suitabe for ubricating meta saw bades. Sticks to the bade, very good ubricating effect Cutting paste In container Contents g Lubricating sticks Cutting paste Cutting paste Without chorine and minera oi. High-quaity mutipurpose cutting oi, based on natura raw materias. Low too wear, efficient. For medium through heavy-duty machining. Proven and tested with high-aoyed and stainess stee. Especiay suitabe for driing, tapping, thread cutting, miing, reaming, turning, machining keyways, sawing, grinding and punching. A kinds of stee, aoyed and unaoyed. A cast metas, e.g. cast stee, grey cast iron, maeabe cast iron etc. Muti-Purpose Cutting Ois auminium and copper and a chrome-nicke compounds. Titanium, manganese. Universa use for machining and forming. For appication in cooing systems and minima-amount ubricating systems Content Content m Spray can Sprayer Container Container

$Concentrated grinding ubricants Concentrated cooing ubricants Emusion mixers Refractometers Band skiers Cutting oi Thread taow 19308 Synthetic grinding concentrate with high corrosion protection and$ Longer service ife compared to standard cooing and machining ubricants. Very to gente the skin, ph at 2,5 % approx. 8,5. Not a hazardous substance, does not contain chorine, nitride or formadehyde.

Longer service ife compared to standard cooing and machining ubricants. Very to gente the skin, ph at 2,5 % approx. 8,5. Not a hazardous substance, does not contain chorine, nitride or formadehyde.

$Grinding partices quicky sette to the bottom of the container, therefore they do not hamper grinding performance. Refractometer vaue 2,1. Water contaminant cass 2.$

4 Concentrated grinding ubricants Concentrated cooing ubricants Emusion mixers Refractometers Band skiers Cutting oi Thread taow Synthetic grinding concentrate with high corrosion protection and EP additives, satisfies the highest requirements. The emusion is transparent and therefure fufis the demands of cear-vision grinding. Longer service ife compared to standard cooing and machining ubricants. Very to gente the skin, ph at 2,5 % approx. 8,5. Not a hazardous substance, does not contain chorine, nitride or formadehyde. Very good corrosion protection even Grinding Concentrates at ower concentrations (starting at 2 %). Grinding partices quicky sette to the bottom of the container, therefore they do not hamper grinding performance. Refractometer vaue 2,1. Water contaminant cass 2. For grinding of different materias (meta, pastics, ceramics). 1:40 (2,5 %). Aso suitabe as additive to pressure water, as additiona corrosion protection and as stabiiser Contents Water-emusive muti-purpose cooant and cutting iquid. Free of nitrite, siicone and pheno. For a wide range of appications, for cutting, machining and working iron, cast meta, non-ferrous metas, stee with ow through medium carbon content, stee with high strength, stainess and heat resistant stee, as we as titanium and titanium aoys. For driing, tapping, thread cutting, miing, reaming, turning, machining keyways, sawing, grinding and punching. Concentrated Cooing Lubricants Contents Container Barre Emusion Mixers Emusion mixers Water connection R 1/2 inch, suction height max. 2m, approx. 1500/h ready mixture at fow pressure of approx. 2,5bar, housing made of specia stee, stainess, with adjustment tabe. Ready for connection to water pipe. For quick preperation of water-mixed (water-emusive) cooing ubricants. The mixer is connected to a water pipe and a container of concentrated cooing ubricant; the mixture is ready as soon as the water suppy is turned on. The percentage of concentration can be reguated over a wide range using a very fine reguating side Safety oop R 1/2 Compete with back fow stop, pipe ventiation and through fow reguator. The safety oop must be instaed when the emusion mixer is connected to a drinking water pipe. Note: According to the safety reguations of DVGM DIN 1988 section , emusion mixers need to be equipped with a safety oop when connected to a drinking water pipe Mixer 101 Loop Refractometers Measuring range 0-32%. With adjustabe eyepiece, accuracy of reading 0,2%, in protective pouch. For fast and accurate measurement of the concentration of water-mixed cooing ubricants and many other soutions in various areas of appication

19372-19374 Band Skiers and Spare Bands Cutting Toos 19372 Compact construction, vertica fixing position or up to 30 anged. Endess skier band, 45 width, magnetic stand, fow capacity approx.

5 Band Skiers and Spare Bands Cutting Toos Compact construction, vertica fixing position or up to 30 anged. Endess skier band, 45 width, magnetic stand, fow capacity approx. 2-6 /h on surface. For care of cooant ubrications on machine toos, machining centres, CNC athes a.s.o. Cared-for cooing ubricants have a consideraby onger service ife, ensure better working hygiene, proong the cooing ubricant exchange intervas and reduce costs. Thanks to its great performance, the band skier can fiter waste ois and other swiing dirt out of the ubricants even when other systems are ess successfu Technica specifications: Eectric connection: Power cabe: Drive: Mounting depth (ET): Optionay avaiabe: Band capacity: Outfow: Weight: 230 V, 50 Hz, AC 1,3 m with 12 V mains adaptor, adjustabe Gear motor 12 V, 4 W, 100% ED Seectabe 160, 260, 530 Modification of ET possibe by exchange of teescope bar and band Approx. 2-6 /h surface oi Joint hose 1/2 inch Approx. 2 kg Band skier Spare skier bands Mounting depth (ET) Cutting Oi Spray Cutting oi for demanding requirements. Extends too ife, aows smaer toerance ranges, absoutey not harmfu. Non-reactive to meta and non-corrosive. Not harmfu to the skin, non-toxic. Pump spray without propeant. For threading, reaming and driing Contents m Handy stick Thread Taow Greases threads in order to achieve a better siding resut. Prevents the threads from breaking Contents approx. g Thread Cutting Ois and Greases With exceent active substances. Highy concentrated. Free of chorine, PCB and sovents. Universa use, for high output, high cutting power, optima surface quaity, exact dimensions, ong too ife and cean threads Akawax Thread cutting ois Soid. For thread cutting and for meta saws Akafi Thread cutting oi Viscuous, in handy dosing botte. For thread cutting. Content Content m g Akafi Akawax

6 Chip safety shieds Magnetic chip retrievers Chip shears Chip hooks Chip Safety Shieds With magnetic base 55 x 40 x 45 and paraboic acryic pastic shied, 360 swive range. Adhesive force approx. 40 kg. Shaft with ba joint is adjustabe and swives in a directions. By oosening or tightening the safety nut on the shaft, any pressure up to 100% (steady hod) can be generated. Note: The V-notch in the base aows for easy mounting on fat and cyindrica surfaces. Effective guard against fying chips, sparks and cooant on athes, grinding, miing and driing machines. Unobstructed view of workpiece and too! Spare safety shied Shied size x x x Magnetic Chip Retrieving Too 1 too - 2 purposes: 1. Removing chips, 2. retrieving sma parts. Stainess stee. Just move the magnet inside the round rod up and down. The strong magnet attracts the meta chips. Push the button and the chips fa off Length Chip Shears With hand guard and 2 bades. Cuts sharp ribbon chips as soon as they are formed or when the machine is stopped. Protects the athe operator from injury Length Chip Hooks With hand guard. For removing sharp meta chips wherever it is not necessary to cut Tota ength Hook ength Chip Hooks With round protection shied 135 Ø. Strong hook (width: 8 at protection shied) tapered to 3 at hook end. For the remova of ong chips Overa ength Hook ength approx

Universal pliers. Flat-bladed pliers. Semi-round-bladed pliers. Pliers with curved semi-round blades PLIERS TOOLS. L mm DESC. CODE.

Universal pliers. Flat-bladed pliers. Semi-round-bladed pliers. Pliers with curved semi-round blades PLIERS TOOLS. L mm DESC. CODE. PIERS TOOS Universal pliers HANDES IN BICOMPONENT PASTIC MATERIA (TPE). MODE FOR SOFT AND HARD WIRE. ESPECIAY ONG CUTTING EDGE FOR ROUND AND FAT CABES WITH SUPPEMENTARY TEMPERING UP TO 60HRC. SPECIA CARBON