Saw, Files, Grinders and Brushes

Size: px
Start display at page:

Download "Saw, Files, Grinders and Brushes"

Transcription

1 ß Overall length approx. 295, working length approx. 15, trim height approx Smooth, hardened cast steel wire, 0,35 Ø. Wire scratch brushes 7007 Brass wire, fine, 0,15 Ø, crimped Rivet Brushes Smooth, hardened cast steel wire, 0,35 Ø. With tufts tapering to points, trim height approx. 35. Saw, Files, Grinders and Brushes V2A steel wire, 0,30 Ø, crimped (rust and acid resistant). Cast steel V2A Brass Rivet brush Rows of bundles ß Trim rows, horsehair, bristles, trim height 18, working length 105. Thread brushes Overall length Workshop brushes ß rows, Korfil-D trim, trim height 60, working length 150. Densely tufted, high resistance to oil, grease and weak acids, e.g. coolant and cutting fluids. For machine cleaning work. Overall length ß 3 rows, crimped brass wire 0,15 Ø, trim height 15 with plastic body. Spark plug brushes Overall length Brake calliper/multi-purpose brushes 2 rows, trim height 23, working length 95. With 2-component plastic handle. For derusting and cleaning of brake callipers Smooth steel wire 0,3 Ø Wavy steel wire 0,35 Ø Wavy brass wire 0,3 Ø Wire Overall length 7020 steel straight steel crimped brass crimped

2 File cards Wire wheels Rotary end brushes Trim: Card filleting, working area approx. 110 x 0. File cards 7070 Overall length Shank-mounted circular brushes H With straight 6 Ø clamping shank. For cleaning, derusting, smoothing, descaling, cleaning of cast welds, light-duty deburring and removing of corrosion and varnish. Suitable for straight grinders, flexible shafts and drills with at least 300 Watt driving power wire wire Brass wire Plastics (SiC). wire Brush Ø Trim width Trim material Trim length Overall length Recoended max Ø rotational speed rpm rotational speed rpm 20,0,0 0,20 3,0 37, ,0 6,0 0,20 6,5 0, ,0 9,0 0,20 9,0 6, ,0 15,0 0,20 12,5 50, ,0 15,0 0,20 15,0 50, ,0 10,0 0,30 19,0 50, ,0 15,0 0,30 19,0 50, ,0 15,0 0,30 19,0 50, wire Brush Ø Trim width Trim material Trim length Overall length Recoended max Ø rotational speed rpm rotational speed rpm 20,0,0 0,20 3,0 37, ,0 6,0 0,20 6,5 0, ,0 9,0 0,20 9,0 6, ,0 15,0 0,20 12,5 50, ,0 15,0 0,20 15,0 50, ,0 10,0 0,20 19,0 50, ,0 15,0 0,15 19,0 50, ,0 15,0 0,30 19,0 50, ,0 15,0 0,15 19,0 50, ,0 15,0 0,30 19,0 50, Brass wire Brush Ø Trim width Trim material Trim length Overall length Recoended max Ø rotational speed rpm rotational speed rpm 30,0 6,0 0,20 6,5 0, ,0 9,0 0,20 9,0 6, ,0 15,0 0,20 12,5 50, ,0 15,0 0,30 19,0 50, Plastics (SiC) Brush Ø Trim width Trim materia Trim length Overall length Recoended max Ø rotational speed rpm rotational speed rpm 50,0 15,0 0,90 12,5 50, ,0 15,0 0,90 19,0 50,

3 ß ß body with straight 6 Ø clamping shank. For fitting in hand grinders or flexible shafts Special steel wire quality, fine. Wire gauge 0,2. For fine brushing etc. Shank-mounted circular brushes Wire grade VA. For work on stainless steel Wire gauge 0, Wire gauge 0,3. Saw, Files, Grinders and Brushes Special steell wire quality, coarse. Wire gauge 0,3. For cleaning, rust removal etc VA Ø Working width Maximum rotational speed approx. rpm Rotary end brushes with shank H Unknotted with 6 Ø clamping shank. The wires come apart during the application. Suitable for straight grinders, flexible shafts and drills. For all light-duty brushing jobs. Perfect for deburring, cleaning and derusting of boreholes and in hard-to-reach places and hollow spaces wire wire with plastic-coated brush Brass wire Brass Ø Wire gauge Effective wire Length maximum rotational speed Ø approx. rpm 10,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, Performance requires quality. Solid carbide high-performance twist drills by ATORN: ATORN s high-quality drilling tools

4 Rotary end brushes Cup brushes Brush rollers Polishing and deburring brushes Rotary end brushes with shank H Unknotted, long type. With cylindrical clamping shank 6. Overall length 120, brush diameter 10. Thanks to the particularly long design, this brush is perfect for hard-to-reach places SINGLETWIST knotting, i.e. the wires are knotted in the opposite direction of the brush. Therefore, the wires do not split during the application. Flexible single-knot brush. With cylindrical clamping shank 6. Overall length 65, brush diameter 10. Especially for machining of inside corners. For straight grinders and drive shafts. (SINGLETWIST) Wire gauge Brush Ø Effective wire Length maximum rotational speed approx. rpm 0, , , , Rotary end brushes (Decarbonising brushes) With straight 6 Ø clamping shank. For fitting in hand grinders or flexible shafts. For work in corners and hard-to-reach spots Long type, steel wire 0,3 Ø Splayed type 70, steel wire 0,3 Ø Short type, steel wire 0,3 Ø Short type, V2A wire 0,3 Ø short long splayed Brush Ø Effective wire length Maaximum rotational speed approx. approx. approx. rpm Cup brushes with shank H Unknotted, for front-side application with the complete trim surface. For cleaning, derusting, smoothing, descaling and for the removal of corrosion and varnish wire 0,3 Ø. 726 wire 0,3 Ø. Plastic-coated brush Brush Ø Effective wire Length maximum rotational speed approx. approx. approx. rpm

5 ß 7265 wire cup brushes Saw, Files, Grinders and Brushes Wavy steel wire, coarse, 0,3 Ø. For cleaning purposes such as removing paint, rust, scale, or burrs Ø Effective wire length Shank Ø Maximum rotational speed 7265 approx. rpm Brush rollers H Unknotted, borehole with keyways. Borehole Ø 19, Stranded wire. Suitable for very heavy-duty brushing projects. Thanks to the arrangement of the wire, the brushing effect is very aggressive wire For texturing workpieces. For perfect corrosion protection With plastic trim (SiC). : For texturing of steel,, and wood. Also for fine deburring of boreholes and break-throughs of large parts Trim Ø Trim thickness Ø Trim length Trim width Recoended rotational speed Max. rotational speed 7310 approx. rpm approx. rpm Stranded wire 100 0, wire 100 0, Plastics (SiC) 100 1, Q The radial bristle brush consists of 8 components. These are attached to a back plate (25, inside diameter). The monolithic system prevents single components from becoming loose, something wellknown from wire scratch brushes or scrapers. The brushes come with inside diameter reduction adapters (13, 16, 19 and 22 ). Long cleaning life. For cleaning, blending, deburring and polishing. Suitable for grinding machines, straight grinders or flexible shafts. Use mandrel cat.-no for the usage with straight grinders. Bristle Brush TM polishing and deburring brushes 700 Grit Ø x Width Maximum rotational speed Colour 700 approx. rpm x brown x green x yellow

6 Wire wheels Tapered brushes Wire wheel brushes Aggressive, multi-row wire wheel with all-steel body and crimped trim. Multi-purpose brush for all medium-heavy hard brushing jobs. Most suitable for brushing wide surfaces. Suitable for cleaning and roughing work on flat (uncontoured) surfaces. Used in flexible machines (flexible shafts) up to max. 150 Ø, larger Ø on stationary machines. 703 For work on iron and steel. Special steel wire quality, Ø 0,3. 70 For work on stainless steel. VA wire, Ø 0, For multi-purpose use of the Ø 100, 125, 150, 178, and 200, each brush comes with 2 and/or 7 borehole adapters: Ø 100 and 125 : 2 reductions from Ø 20 to Ø 1/2" and 5/8". Ø 150, 178 and 200 : 7 reductions from Ø 31, 75 to Ø 13/ 15 / 16 / 19 / 20 / 7/8" and 1" (25, ). wire VA wire Ø Borehole Ø With Working width Effective wire length Maximum rotational speed reducers approx. rpm ,00 x ,00 x ,75 x ,75 x ,75 x , , Knot-type wire wheel brushes with shank Knotted heavy-duty steel wire 0,35 Ø. For direct mounting in hand grinders/flexible shafts Ø Working width Effective wire length Shank Ø Maximum rotational speed 7601 approx. rpm Wire wheels pipeliner with hole/thread H With borehole/thread, knotted. Effective width 6. Aggressive and sturdy brush, which is suitable for high mechanical stress. For heavy-duty brushing, suitable for applications in pipeline and container construction. Thanks to its narrow design, this brush is perfect for applications in hard-to-reach areas wire 0,5 Ø wire 0,5 Ø. All brushes degreased Ø Effective wire length Borehole/thread Ø Maximum rotational speed approx. rpm , , M , M

7 ß Wire wheels COMBITWIST with borehole Saw, Files, Grinders and Brushes H Borehole 22,2. With COMBITWIST knotting, therefore smooth running, even when working on corners and edges. No recoil when machining corners. Increased service life and removal of material. Less unravelling of the knots during use. For heavy-duty application with angle grinders and with higher rotational speed (up to 80 m/s) wire 0,5 Ø wire 0,35 Ø Ø Working width Effective wire length Maximum rotational speed approx. rpm With all-steel body, knotted heavy-duty steel wire 0,5 Ø. For direct mounting on angle grinders. For hardest brushing works, working on welds. Knot-type wire wheel brushes Cat.-no is particularly suitable for one hand angle grinders and straight grinders Ø Working width Effective wire length Borehole Maximum rotational speed 7603 Ø approx. rpm , , Tapered brushes COMBITWIST H With COMBITWIST knotting.thread M 1. For derusting, descaling, cleaning of welds and for deburring. Thanks to the tapered shape perfect for the application in hard-to-reach places. Suitable for heavy-duty application with angle grinders and with higher rotational speed (up to 80 m/s) wire 0,5 Ø wire 0,35 Ø Ø Number of Working width Effective wire length Maximum rotational speed knots approx. rpm Depressed-centre knot-type wire wheel brushes Trim: smooth cast steel wire 0,5 Ø, mount: thread M 1 x 2,0. For aggressive brushing in hard-to-reach spots, e.g. on welds or angle plates. For all coon one-hand angle grinders Ø Working width Effective wire length Maximum rotational speed 7605 approx. rpm

8 Cup brushes Tube brushes Internal brushes Knotted Cup Brushes H With knotted wire. Specially for high-speed angle grinders, with thread adapter M 1, for very heavy duty surface brushing. For cleaning applications such as removal of rust, for deburring and cleaning Wire grade steel wire Wire grade wire, all brushes are degreased Cup brushes have a support ring to prevent flaring or unwinding of knots. When the wire is partly worn down, the ring can be removed so that the brush can be used up completely. 65 Ø without support ring. Ø Wire gauge Trim length Number of Maximum rotational speed knots approx. rpm 65 0, , , , , , Cup wire wheel brushes With knotted wire 0,5 Ø, single-row. Specially for high-speed angle grinders, with thread adapter M 1, for very heavy duty surface brushing. Cup brushes have a support ring to prevent flaring or unwinding of knots. When the wire is partly worn down, the ring can be removed so that the brush can be used up completely. 65 Ø without support ring Special high-speed steel wire quality 0,5 Ø Wire grade VA wire 0,5 Ø steel VA Ø Knot rows Maximum rotational speed approx. rpm Cup brushes with thread H With unknotted wire 0,3 Ø. Perfect for brushing jobs of of medium difficulty mainly on large surfaces, for deburring, cleaning and derusting. For angle grinders with thread adapter M wire. 761 wire, brushes degreased Ø Effective wire length Maximum rotational speed approx. rpm

9 ß 7615 Tube brushes Saw, Files, Grinders and Brushes With pressed-on thread connector Ww. 1/2 inch, cast steel wire trim, working length 100, overall length 160. Double spiral. Plumber's snakes see cat.-no Ø Ø 7615 inch / / Internal brushes with thread H Unknotted. Overall length 120. For deburring and cleaning of pipes, threads, sleeves and cylinders. For driving machines such as straight grinders, flexible shafts and drills. For lower rotational speed of up to 1000 rpm. In addition to the existing thread, the internal brushes up to diameter 20 are equipped with a shank which allows the clamping in 6 collets. Internal brushes with 3/8" thread are equipped with a shank (10 ) Wire grade steel Extension for internal brushes For cat.-no Wire shaft for internal brushes For cat.-no Quick-change handle for internal brushes with M 6 thread. For cat.-no Quick-change handle for internal brushes with 3/8" thread. For cat.-no Wire grade Wire grade brass. Brass Ø Thread Trim length M M M M M M /8 inch /8 inch /8 inch Length ca. Extension Wire shaft Quick-change handle (for M 6) Quick-change handle (for 3/8 inch)

10 Honing tool Honing tool Novoflex-B Robust, self-centring honing tool for smooth grinding. SiC trim. Thanks to the flexible design, the abrasive balls adapt to the surface and are therefore suitable for chamfering, for finishing of surfaces, and in untrue boreholes. Recoended rotational speed rpm. Overall length 200. The perfect tool to create a uniform, finely ground surface mit hohem Traganteil, the so-called plateau finish. For the automotive, aerospace,hydraulic, heat exchanger industries.suitable for hand drills, honing machines, and automated machines. Silicon carbide. For usage with honing oil or dry. SiC/grit 120 SiC/grit 180 Ø For borehole Ø Working width Shank Ø up to , , , , , , , , , , , , , , , , , , , , , , , , , Performance requires quality. Burrs by ATORN: ATORN s high-quality grinding and cutting tools

Code Desc. Ø mm Ø hole mm. Code Desc. Ø mm Ø hole mm. With wire of corrugated steel. Suitable for removing rust, scale etc.. Employee of grinders.

Code Desc. Ø mm Ø hole mm. Code Desc. Ø mm Ø hole mm. With wire of corrugated steel. Suitable for removing rust, scale etc.. Employee of grinders. Circular brush steel wire Corrugated steel wire high strength. Suitable for deburring, satin finishing and polishing, to remove rust and metal cleaning. Code Desc. Ø Ø hole Thickness 3002700 77-150x16

More information

BRUSHES WITH SHANK 60 61

BRUSHES WITH SHANK 60 61 60 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0. 0.0 STH 0.0 0.00 ROH 0.0 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 7 9 /8 /8 8,000 0 7.98.

More information

Measuring and Laying-Out Tools, Testing Instruments

Measuring and Laying-Out Tools, Testing Instruments ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade

More information

Cutting, Grinding and Abrasive Accessories

Cutting, Grinding and Abrasive Accessories High quality range of abrasive cutting discs, grinding discs and surface preparation accessories engineered for ultimate performance Universal Diamond Blades Cutting and Grinding Discs The essential construction

More information

CRIMPED WIRE WHEELS JET PREMIUM WIRE WHEELS JET premium wire wheels have set the standard in industry as the best performing bench wire wheel for metal applications Heavy wire fill and the best piano wire

More information

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. 1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.

More information

Knotted Shank Brushes

Knotted Shank Brushes Knotted Shank Brushes Knot Wheel Brushes with Shank 6 mm Ø D A H Z RPM Pack. steel 0.35/0.014" steel 0.50/0.020" stainl. 0.50/0.020" mm /inch mm /inch max. Art. No. Art. No. Art. No. 75 / 3 9 / 3/8 15

More information

Precision Universal Bevel Protractor, Set

Precision Universal Bevel Protractor, Set ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...

More information

O N T H E C U T T I N G E D G E O F T E C H N O L O G Y

O N T H E C U T T I N G E D G E O F T E C H N O L O G Y A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer

More information

Overview of silicon carbide abrasive brushes

Overview of silicon carbide abrasive brushes Overview of silicon carbide abrasive brushes Nylon filaments co-extruded with an abrasive SiC grain act like flexible files precisely deburring, finishing and radiusing edges as they wipe across them.

More information

sweeps Smooth Surface and Floor Sweeps B % Black Horsehair B-25 Black Horsehair and Synthetic Filament Blend

sweeps Smooth Surface and Floor Sweeps B % Black Horsehair B-25 Black Horsehair and Synthetic Filament Blend Smooth Surface and Floor Sweeps sweeps Sweeping fine particulate in homes, stores, institutions and offices. B-24 100% Black Horsehair Exceptional quality horsehair with an oval trim for fine sweeping

More information

INTRODUCTION TO GRINDING PROCESS

INTRODUCTION TO GRINDING PROCESS GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding

More information

Sheet Metal Tools. by:prem Mahendranathan

Sheet Metal Tools. by:prem Mahendranathan Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill

More information

M-BRAD Abrasive Filament Power Brushes

M-BRAD Abrasive Filament Power Brushes M-BRAD Abrasive Filament Power Brushes TRUST BLUE n Longer brush life n Conforms to irregular shapes n Ideal for deburring and surface conditioning n More consistent finish 1 Table of Contents / Dimensions

More information

Special Brushes for Metals, Wood and Hard Plastics

Special Brushes for Metals, Wood and Hard Plastics Pneumatic Surface Finisher Save time sanding and polishing. 4 wide face is ideal for finishing stainless steel, metals, wood and synthetics. PNEUMATIC SURFACE FINISHER / ACCESSORIES / SPECIAL BRUSHES The

More information

Flame. Tree Pointed. Product Barcode Price Ø Length Shank Code

Flame. Tree Pointed. Product Barcode Price Ø Length Shank Code Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate

More information

E TREMEFLAP FLAP WHEELS

E TREMEFLAP FLAP WHEELS E TREMEFLAP REFERENCE & APPLICATION GUIDE Flap Wheels EASY WAYS TO PLACE AN ORDER Phone: 905 282 1313 Fax: 905 282 1313 e-mail: sales@extremeabrasivesl.com Over the Web: (coming soon) EXTREME ABRASIVES

More information

(mm) x x x x x

(mm) x x x x x Waterproof Paper Sheets Flexible latex impregnated, anti-slip paper backing with a fully resin-bonded grit. The paper can be used wet or dry as a durable abrasive for hand finishing. Supplied in full sheets

More information

Burnishing machine TRINOXFLEX Set. BSE Set

Burnishing machine TRINOXFLEX Set. BSE Set Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Burnishing machine TRINOXFLEX Set BSE 4-3 00 Set 433.438 Power input 400 watt Power output 880 watt Max. tool Ø 25 Tool width 00 Tool

More information

Brushware -Cup Brushes -Grinding Wheels -Spindle Brushes -Polishing Mops -Polishing Compounds

Brushware -Cup Brushes -Grinding Wheels -Spindle Brushes -Polishing Mops -Polishing Compounds BRUSHWARE Brushware -Cup Brushes -Grinding Wheels -Spindle Brushes -Polishing Mops -Polishing Compounds Brushware Brushware Index 180 Brushware Polishing Mops & Bonnets 181 Brushware Polishing Compounds

More information

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

More information

Tools Step Drill Bits

Tools Step Drill Bits Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid

More information

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools? ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and

More information

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students

More information

The main features of quality twist drills made out of high speed steel (HSS) are:

The main features of quality twist drills made out of high speed steel (HSS) are: drill bits mounted drill bits on 2.35mm shanks Busch Mounted Drills (On 2.35mm Shank) Shank Drills 1pc each 6pcs+ each 971 010 0.50mm 1.63 1.25 971 020 0.60mm 1.63 1.25 971 040 0.70mm 1.63 1.25 971 030

More information

Especially suitable for work in restricted working spaces.

Especially suitable for work in restricted working spaces. Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.

More information

March weeks. surcharge for

March weeks. surcharge for March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not

More information

Application For cutting paper, plastics, carpeting, cardboard, wire made of soft materials (not steel), thin sheet copper, aluminium, etc.

Application For cutting paper, plastics, carpeting, cardboard, wire made of soft materials (not steel), thin sheet copper, aluminium, etc. ß 3001-3002 Straight blades, with screw. Special steel. Jeweller s shears 3001 Straight handles. 3002 With finger holes. Worshop supplies 3001 3002 Overall length 3001 3002 180 101 101 300 Straight blade,

More information

Special Tools And Modified Standards. Some examples of specials and their uses

Special Tools And Modified Standards. Some examples of specials and their uses Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.

More information

POLY-PTX PROFESSIONAL

POLY-PTX PROFESSIONAL 8 POLY-PTX 500 + PROFESSIONAL The original professional machine for hard permanent use from the global market leader and inventor of the longitudinal grinder. A multi-function grinder for high quality

More information

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602 596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for

More information

QUALITY CONTROL WARRANTY AND RETURNS POLICIES WHEN ORDERING BASIC APPLICATIONS TYPICAL APPLICATIONS INCLUDE:

QUALITY CONTROL WARRANTY AND RETURNS POLICIES WHEN ORDERING BASIC APPLICATIONS TYPICAL APPLICATIONS INCLUDE: Cratex Manufacturing Co., Inc. 328 Encinitas Blvd., Suite 200 Encinitas, California 92024 Phone: (760) 942-2877 FAX: (760) 942-4513 Phone: (800) 800-4077 FAX: (800)788-0463 GRIT TEXTURES Each Cratex size

More information

SURFACE CONDITIONING CUTTING ABRASIVES

SURFACE CONDITIONING CUTTING ABRASIVES SURFACE CONDITIONING CUTTING ABRASIVES 399 ABRASIVES SURFACE CONDITIONING POWERBLEND 503515 POWERBLEND SCD Flap Disc Surface Conditioning Super High Performance (for Angle Grinders) POWERBLEND SCD flap

More information

STEEL RULE. Stock TRY SQUARE

STEEL RULE. Stock TRY SQUARE FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation

More information

100-Hones. AMMCO Cylinder Hones. Not recommended for two stroke engines (Will hang-up on the ports) Honing Oil (12 ounce can)

100-Hones. AMMCO Cylinder Hones. Not recommended for two stroke engines (Will hang-up on the ports) Honing Oil (12 ounce can) AMMCO Cylinder Hones Not recommended for two stroke engines (Will hang-up on the ports) Deglazing Type Cylinder Hones 527-03800 Range 2" to 5". *Oversizing impossible-breaks glaze-removes toolmarks-cylinder

More information

. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding

. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes

More information

Abrasives & Engineering Materials

Abrasives & Engineering Materials INTERNATIONAL ORDERLINE Abrasives & Engineering Materials Abrasives - contents Abrasives Drill and Die Grinder- Abrasives & Wire Brushes Angle Grinder - Discs, Flap Discs & Wire Brushes 2018 2018 2019

More information

Quality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.

Quality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated. 37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150

More information

DIAMETER SELECTION ABRASIVE SELECTION

DIAMETER SELECTION ABRASIVE SELECTION GENERAL APPLICATION AND SELECTION OF the tool DIAMETER SELECTION Tool diameter is determined by the nominal bore size in which the tool is to operate. The Flex-Hone Tool is always produced and used in

More information

Fibratex Convolute Wheels

Fibratex Convolute Wheels Clean and Finish Convolute Wheels Soft, conformable Open-mesh Consistent finish Reduced loading An open-mesh product for cleaning and finishing operations. These wheels are: used with light/moderate pressure

More information

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight

More information

Tungsten Carbide Burs for Tough Applications

Tungsten Carbide Burs for Tough Applications Tungsten Carbide Burs for Tough s TRUST BLUE Design optimized for hand-held applications. Special cut patterns minimize tooth chipping/breakage, splintering and bur head failures. Developed specifically

More information

( I N D I A ) Machine Inline DeBurring Solutions. Exceed Expectation through Innovation. Ceramic Brushes Flow Through Holders & Brushes

( I N D I A ) Machine Inline DeBurring Solutions. Exceed Expectation through Innovation. Ceramic Brushes Flow Through Holders & Brushes R ( I N D I A ) MID Machine Inline DeBurring Solutions Exceed Expectation through Innovation Ceramic Brushes Flow Through Holders & Brushes DeBurring Solutions (INDIA) Exceed Expectation through Innovation

More information

Introduction. Unitized abrasive materials. Context

Introduction. Unitized abrasive materials. Context Unitized Introduction With its slogan Time saving abrasives Cibo is constantly striving to save our customers time and money. The range of unitized abrasive materials fits in perfectly with this strategy.

More information

Build a Drill Press Vise

Build a Drill Press Vise Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe

More information

TUBE AND SHEET DRILLS

TUBE AND SHEET DRILLS TUBE AND SHEET DRILLS 03 Tube and sheet drills The flutes of the RUKO high performance tube and sheet drills are BN ground from the solid hardened form. Because BN (cubical boron nitride) is a much harder

More information

Product Range. Solutions for Industry.

Product Range. Solutions for Industry. Product Range Solutions for Industry www.master-abrasives.co.uk Introduction Master Abrasives has a hard and long earned reputation in the UK abrasives market for providing solutions with high quality

More information

PFERD Australia - World Of Tools

PFERD Australia - World Of Tools PFERD Australia - World Of Tools VERTRAU BLAU Trust In The Blue Known globally for manufacturing quality abrasives. Your total abrasive solution. Tradition, Progress, Innovation A leading manufacturer

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.

More information

grinding & polishing 39

grinding & polishing   39 grinding & polishing sales@trelawny.co.uk 39 grinding & polishing grinding & polishing - an introduction HOW THEY WORK Floor grinders use a horizontal rotating disc to perform a multitude of tasks, commonly

More information

HEAVY DUTY BENCH GRINDERS

HEAVY DUTY BENCH GRINDERS HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with

More information

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.

More information

PTX Grinding Wheels for Coarse and Fine Finishing

PTX Grinding Wheels for Coarse and Fine Finishing PTX Grinding Wheels for Coarse and Fine Finishing PTX abrasives from CS Unitec are made according to high quality standards. A unique production process guarantees high concentricity and thus vibration-free

More information

ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials

ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.

More information

One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized

One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular

More information

ABRASIVES. Buffalo Dental Manufacturing Company, Inc.

ABRASIVES. Buffalo Dental Manufacturing Company, Inc. ABRASIVES Buffalo Dental Manufacturing Company, Inc. www.buffalodental.com 2 Abrasives, Blue Mounted Points Blue mounted points ideal for trimming and finishing dentures, temporaries and restorative materials.

More information

Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm

Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm 575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18

More information

Legacy Upgraded Junior Gentlemen s Pen Kit

Legacy Upgraded Junior Gentlemen s Pen Kit Description: The Upgraded Junior Gentlemen s model is a classic style pen which is easy to turn and uses a Roller Ball Refill which is highly desirable among pen enthusiasts The Upgraded Junior Gentlemen

More information

20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered

20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3

More information

Drill Bits & Hole Saws

Drill Bits & Hole Saws F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill

More information

DISC FINISHING MACHINES

DISC FINISHING MACHINES Application Processing of small parts Larger parts (from approx. 50 g weight can also be processed individually) Thanks to high rotational speed and high relative speeds, reduction of processing times

More information

FERROUS AND NON-FERROUS MATERIAL

FERROUS AND NON-FERROUS MATERIAL Aluminum Cutting Small Material Large Material Brush Deburring Compound Angles In and Outside Deburring FERROUS AND NON-FERROUS MATERIAL MADE IN GERMANY H350 & H450 For production cutting of mild steel

More information

HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use

HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged

More information

Professional belt grinding in manual trades and industry.

Professional belt grinding in manual trades and industry. METAL Professional belt grinding in manual trades and industry. GRIT GX / GI GRIT belt grinders one system, a wealth of possibilities. GRIT by FEIN is synonymous with competence and durability in belt

More information

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292

More information

Complete solutions for machining stainless steel surfaces from FEIN.

Complete solutions for machining stainless steel surfaces from FEIN. METAL Complete solutions for machining stainless steel surfaces from FEIN. For results that shine. CONTENTS Stainless steel shines with possibilities. Make the most of them with FEIN tools and expertise.

More information

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated

More information

SPEED-PRO PISTON RINGS - DESIGN, FEATURES, and INSTALLATION GUIDELINES Federal-Mogul Document #1205

SPEED-PRO PISTON RINGS - DESIGN, FEATURES, and INSTALLATION GUIDELINES Federal-Mogul Document #1205 SPEED-PRO PISTON RINGS - DESIGN, FEATURES, and INSTALLATION GUIDELINES Federal-Mogul Document #1205 RADIAL THICKNESS All of the rings in the Speed-Pro line meet original equipment dimensions for proper

More information

Roughing vs. finishing

Roughing vs. finishing Finishing methods Roughing vs. finishing Roughing removing material as fast as possible, without special demands on surface and low demand on precision high Q, high IT, high Ra Finishing making final surface

More information

BONDED ABRASIVE PRIMER

BONDED ABRASIVE PRIMER BONDED ABRASIVE PRIMER Basic information on the terminology and use of bonded abrasive products. Property of: KASCO ABRASIVES Coldwater, Michigan 1-800-367-729 Fax 517-279-7265 1 GENERAL BONDED ABRASIVES

More information

Ball-Joint Scrapers Steel Blade Carbide Blade 05K K21.04

Ball-Joint Scrapers Steel Blade Carbide Blade 05K K21.04 Ball-Joint Scrapers Steel Blade Carbide Blade 05K21.01 05K21.04 The Veritas Ball-Joint Scraper is based on a tool originally made by L.S. Starrett Tool Company but out of production for many years. Originally

More information

Agricultural Mechanics and Technology Power Tool Safety Rules

Agricultural Mechanics and Technology Power Tool Safety Rules Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust

More information

PORTABLE STONE ASSEMBLIES

PORTABLE STONE ASSEMBLIES 0206 I-AB-101B INSTRUCTIONS BOOKLET for SUNNEN PORTABLE STONE ASSEMBLIES SUNNEN AND THE SUNNEN LOGO ARE REGISTERED TRADEMARKS OF SUNNEN PRODUCTS COMPANY. SUNNEN PRODUCTS COMPANY 7910 MANCHESTER AVE. ST.

More information

Cutting, Drilling and Beveling

Cutting, Drilling and Beveling Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized

More information

TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS

TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or

More information

ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS

ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two

More information

Wire Wheels Brushes Files & Rasps

Wire Wheels Brushes Files & Rasps Wire Wheels Brushes Files & Rasps WIRE WHEELS & BRUSHES Crimped & Knotted Wire Cup Brushes... 1 Crimped & Knotted Wire End Brushes... 2 Crimped Wide Face Wire Wheel Brushes. 2 Crimped Wire Wheels & Brushes.......

More information

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.

More information

Shorten Screws without a Burr!

Shorten Screws without a Burr! Tips & Tricks www.youtube.com/user/breitfeldschliekert Fitting Tool for Rimless Frames 22 Shorten Screws without a Burr! Works as a Nut Driver and Screw utter in one Tool No. 2268 00 for screws with 1.2

More information

Basic tools. Step drills / Cone drills

Basic tools. Step drills / Cone drills Basic tools Step drills / Cone drills HAUPA Step-drills are the ideal tool for sheet-metal working. Typically used in the electrical industry, in the sanitary-/heating-industry, during mechanical engineering,

More information

Abrasive Systems Division. Scotch-Brite Surface Conditioning Wheels. Driving consistency. with 3M Abrasives

Abrasive Systems Division. Scotch-Brite Surface Conditioning Wheels. Driving consistency. with 3M Abrasives Abrasive Systems Division Surface Conditioning Wheels Driving consistency with 3M Abrasives Wheels wheels, one of the most complete selections of surface conditioning wheels, continue to raise the bar

More information

Valve repair and testing technique

Valve repair and testing technique High standard in precision. Valve repair and testing technique Quality Made in Germany by GmbH & Co. KG Grinding and Lapping Machines for Industrial Valves VENTA Portable grinding and lapping machines

More information

TECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH

TECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH TECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH MICRO-MESH finishing belts provide desired surface qualities and economic benefits to many types of finishing operations, and are available in a range

More information

Manufacturing Processes (continued)

Manufacturing Processes (continued) Manufacturing (continued) Machining Some other processes Material compatibilities Process (shape) capabilities Manufacturing costs Correct pg 142, question 34i should read Fig 6.18 question 34j should

More information

Clamping devices 521

Clamping devices 521 Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps

More information

Pliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces

Pliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces Content Pliers. Page Article group Page Article group Heavy Duty Combination Pliers. 197 Heavy Duty Combination Pliers 198 Long Round Nose Plier 198 Long Flat Nose Plier 198 Chain Nose Pliers, straight

More information

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity

More information

CHIP AND DUST EXTRACTION SYSTEMS

CHIP AND DUST EXTRACTION SYSTEMS CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories

More information

By C.W. Woodson From the pages of Model Craftsman magazine June, 1937

By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 As shown in Fig. 1, the tool post grinder for which plans are given here can be used to finish up delicate work to more accurate dimensions

More information

Legacy Polaris Pen Kit

Legacy Polaris Pen Kit Description: The Polaris model is a single tube pen kit that uses a 3/8 tube and is a great starter kit for those new to pen turning. They look similar to our Viceroy kit but the body tube is longer which

More information

Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools

Product Overview. Electric Pneumatic Hydraulic.   Concrete and Masonry Dust Collection Systems Hot Work Zone Tools Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop

More information

CNC Cooltool - Milling Machine

CNC Cooltool - Milling Machine CNC Cooltool - Milling Machine Module 1: Introduction to CNC Machining 1 Prepared By: Tareq Al Sawafta Module Objectives: 1. Define machining. 2. Know the milling machine parts 3. Understand safety rules

More information

Legacy DaVinci Pen Kit

Legacy DaVinci Pen Kit Description: The DaVinci model is a single tube pen kit that uses a 3/8 tube and is a great starter kit for those new to pen turning. They are look similar to our Viceroy kit with a more intricate design.

More information

Professional belt grinding in manual trades and industry.

Professional belt grinding in manual trades and industry. METAL Professional belt grinding in manual trades and industry. GRIT GX / GI GRIT belt grinders one system, a wealth of possibilities. GRIT by FEIN is synonymous with competence and durability in belt

More information

For results that shine.

For results that shine. METAL For results that shine. New FEIN products for machining stainless steel surfaces New FEIN stainless steel products durability as standard. Need to remove dirt, tarnishing, scratches or welded seams?

More information

ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS

ACCESSORIES CATALOG.  SKODA LIVE CENTERS BORING AND FACING HEADS ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through

More information

Lathes. CADD SPHERE Place for innovation Introduction

Lathes. CADD SPHERE Place for innovation  Introduction Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to

More information

Trade of Toolmaking. Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2. Published by. Trade of Toolmaking Phase 2 Module 3 Unit 9

Trade of Toolmaking. Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2. Published by. Trade of Toolmaking Phase 2 Module 3 Unit 9 Trade of Toolmaking Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2 Published by SOLAS 2014 Unit 9 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4

More information

Abrasive Machining and Finishing Operations

Abrasive Machining and Finishing Operations Abrasive Machining and Finishing Operations Bonded Abrasives Used in Abrasive-Machining Processes Figure 25.1 A variety of bonded abrasives used in abrasivemachining processes. Source: Courtesy of Norton

More information