ALGERIA, ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, CHINA,

Transcription

1 Compact Magnetic-Inductive Fowmeter for conductivity iquids measuring monitoring anaysing Fow MIK Range from iquids, acids and caustic soutions: up to L/min frequency-, switching-, anaogue digita pug on dispay Accuracy: ±.0 % of f.s. pmax: 0 bar; tmax: 80 C Connection: ½... ¾ mae, diverse accessories Materia: norma iquids: PPS, st. st. aggressive iquids: PVDF, Hasteoy Advantages: No moving parts in the measuring tube Low pressure oss Any mounting position Short reaction time repacement for caorimetric fow switches High quaity for owest price dosing eectronic compact eectronic KOBOLD companies wordwide: ALERIA, ARENTINA, AUSTRALIA, AUSTRIA, BELIUM, BULARIA, CANADA, CHILE, CHINA, COLUMBIA, CZECHIA, DOMINICAN REPUBLIC, EYPT, FRANCE, ERMANY, REAT BRITAIN, HUNARY, INDIA, INDONESIA, ITALY, MALAYSIA, MEXICO, MOROCCO, NETHERLANDS, PERU, PHILIPPINNES, POLAND, ROMANIA, SINAPORE, SLOVAKIA, SOUTH KOREA, SPAIN, SWITZER- LAND, TAIWAN, THAILAND, TUNISIA, USA, VENEZUELA, VIETNAM KOBOLD Messring mbh Nordring -4 D-679 Hofheim/Ts. Head Office: +49(0) Saes DE: +49(0) (0) info.de@kobod.com 3

2 Fow Compact Magnetic-Inductive Fowmeter for conductivity iquids Mode MIK Description The new KOBOLD fowmeter Type MIK is used for measuring and monitoring smaer and medium-sized fow of conductivity iquids in pipes. The device operates according to the magnetic induction measurement principe. According to Faraday s Law of magnetic induction a votage is induced in a conductor moving through a magnetic fied. The eectricay conductive measuring agent acts as the moved conductor. The votage induced in the measuring agent is proportiona to the fow veocity and is therefore a vaue for the voumetric fow. The fowing media must have a minimum conductivity. The induced votage is picked up by two sensing eectrodes which are in contact with the measuring agent and sent to the measuring ampifier. The fow rate wi be cacuated based on the cross sectiona area of the pipe. The measurement is not depending on the process iquid and its materia properties such as density, viscosity and temperature. The device may be equipped with a switch, frequency or anaogue. Moreover, there is a compact eectronic system to be seected from, which contains a switch and an anaogue. The device series is competed by an optionay obtainabe dosing and counter eectronic system. The counter eectronics system shows the current fow rate on the first ine of the dispay and shows the partia or overa voume on the second ine. A dosing eectronic system contros simpe fiing duties and aso measures the fow rate, overa voume and fiing voume. The anaogue and two reay s can be utiised for the further processing of signas. Technica Detais Range: see tabee Accuracy: ±.0 % of f. s. Repeat accuracy: ±.0 % of f. s. (f.s. = fu scae) Measurement process: magnetic inductive Eectrica conductivity: min. 30 µs/cm Mounting position: in a directions, fow in direction of the arrow In-/Outet: 3 x DN / x DN Media temperature: C (max. +60 C with PVC-connection set) Ambient temperature: C Max. pressure: 0 bar Max. pressure oss: max. 0 mbar at f.s. Wetted Parts Sensor housing: PPS or PVDF, fibregass-reinforced Connection set: PVC-gue connection or hose connection, wed-on ends st. st Eectrodes: st. st or Hasteoy C4 Sea: NBR, FPM or FFKM Response time t 90 : approx. 3 s (rising fow) approx. s (faing fow) Protection: IP 6 Medias Connection/Ranges Eectric conductivity iquids Acids and caustic soutions Drinking, cooing and waste water round water, raw water Aggressive or saty soution Unsuitabe for oi (missing conductivity) Appication Areas Fow monitoring, fow measuring, dosing and counting for: Machine buiding Chemica Industry Paper Industry Automobie Industry Cement Industry Laboratory Connection ½ mae ¾ mae mae ½* mae * mae ¾* mae Inside diameter mm 0 mm mm 0 mm 3 mm 4 mm Fow veocity at f.s. approx. 0.9 m/s approx..7 m/s approx.. m/s approx. 3. m/s approx. 3.0 m/s approx. 4.7 m/s approx. 3.3 m/s approx..3 m/s approx. 3.3 m/s approx. 6.6 m/s approx. 3.6 m/s approx..8 m/s Range L/min L/min L/min L/min L/min. 0 L/min L/min.0 00 L/min 8 60 L/min 6 30 L/min 00 L/min L/min 4

3 Compact Magnetic-Inductive Fowmeter for conductivity iquids Mode MIK Fow MIK-...F300, MIK-...F390 Impuse : PNP, open coector, max. 00 ma 00 Hz at f.s. (...F300) Hz at f.s. (...F390) Power suppy: : 4 VDC ±0 % Power consumption: 60 ma Eectrica connection: pug M x MIK-...S300, MIK-...S30D Dispay: duo-led for switch status and overfow Switching : reay SPDT max. A/30 VDC or active 4 VDC, N/C/N/O Switch point: % of f.s. in 0 %-steps that can be configured by the customer using a rotary switch Power suppy: 4 VDC ±0 % Power consumption: 80 ma Eectrica connection: pug M x, -pin MIK-...L303; MIK-...L343 Output: 0(4)-0 ma, 3-wire Max. oad: 00 Ω Power suppy: 4 VDC ±0% Power consumption: 80 ma Eectrica connection: pug Mx MIK (usage with AUF-3000) Output: 4-0 ma, 3-wire Max. oad: 00 Ω Power suppy: 4 VDC ±0 % Power consumption: 80 ma Eectrica connection: pug DIN 4360 MIK-...C3xx (Compact eectronics) Dispay: 3-digit LED Anaogue : (0)4...0 ma adjustabe (ony MIK-...C34x) Max. oad: 00 Ω Switching : () semiconductor PNP or NPN, set at factory Contact function: N/C/ N/O-frequency programmabe Settings: via buttons Power suppy: 4 VDC ±0 %, 3-wire Power consumption: 0 ma Eectrica connection: pug M x MIK-...Exxx (Counter eectronics) Dispay: LCD, x8 digit, iuminated tota, part and fow quantities, units seectabe Quantity meter: 8-digit Anaogue : (0)4...0 ma adjustabe Load: max. 00 Ω Switching : reays, max. 0 V/ A/000 VA Settings: via 4 buttons Functions: reset, MIN/MAX memory, fow monitor, monitoring for part and tota quantity, anguage Power suppy: 4 VDC ±0 %, 3-wire Power consumption: approx. 0 ma Eectrica connection: cabe connection or M pug more technica detais see data sheet ZED in the brochure Z MIK-...xxx (Dosing eectronics) Dispay: LCD, x8 digit, iuminated, dosing-, tota-, and fow quantity, units seectabe Quantity meter: 8-digit Dosage: -digit Anaogue : (0)4...0 ma adjustabe Load: max. 00 Ω Switching : reays, max. 0 V / A / 000 VA Settings: via 4 buttons Functions: dosing (reay S), start, stop, reset, fine dosing, correction amount, fow switch, tota quantity, anguage Power suppy: 4 VDC ±0 %, 3-wire Power consumption: approx. 0 ma Eectrica connection: cabe connection or M pug more technica detais see data sheet ZED in the brochure Z

4 Fow Compact Magnetic-Inductive Fowmeter for conductivity iquids Mode MIK Eectrica Connections MIK-...S300 MIK-...S30D N/O common N/C N/C N/O MIK-...L3x3, MIK- F3x0 MIK n.c. Signa signa out 3 signa out +V S MIK-...C30* MIK-...C34* Switch switch out 0(4)-0 ma Switch switch out switch Switch out out MIK-...E4R, MIK-...4R Cabe Connection Pug Connection Wire number MIK-...E4R MIK-...4R Counter eectronics Dosing eectronics +4 V DC +4 V DC -0 ma 4-0 ma 4 +4 V DC reset/ctr * d.c./ctr * U (4) - 0 ma out max. 00 Ω reset part quantity contro * 6 n. c. contro * 7 reay S reay S 8 reay S reay S 9 reay S reay S 0 reay S reay S * Contro <-> : Start-dosing Contro <-> : Stop-dosing Contro <-> Contro <-> : Reset-dosing 30 V AC/DC / A U S S 6

5 Compact Magnetic-Inductive Fowmeter for conductivity iquids Mode MIK Fow Order Detais (Exampe: MIK-NA 0 A F300) Mode Range Connection set Eectronics..0.. = L/min, ½... = L/min, ½..A.. ) = without..p.. = PVC-hose connection..e.. = st. st. wed-on ends frequency..f300 = M-pug, 00 Hz..F390 = M-pug, Hz MIK-NA... = PPS-housing, NBR-sea, st. st.- eectrode MIK-VA... = PPS-housing, FPM-sea, st. st.-eectrode MIK-6FC... = PVDF-housing, FFKM-sea, Hasteoyeectrode..0.. = L/min, ¾... = L/min, ¾ = L/min,..3.. =. 0.0 L/min,..0.. = L/min, ½... = L/min, ½ = L/min,..6.. = L/min,..A.. ) = without..k.. = PVC-gue connection..p.. = PVC-hose connection..e.. = st. st. wed-on ends..a.. ) = without..k.. = PVC-gue connection..e.. = st. st. wed-on ends switching..s300 = reay, M-pug..S30D = active 4 V DC, M-pug anaogue..l303 = M-pug, 0-0 ma..l343 = M-pug, 4-0 ma..43 = DIN-pug, 4-0 ma compact eectronics..c30r = x open co. PNP..C30M= x open co. NPN..C34P = 0(4) - 0 ma, x open co. PNP..C34N = 0(4) - 0 ma, x open co. NPN counter eectronics..e4r = LCD, 0(4)-0 ma, xreay, m cabe..e34r = LCD, 0(4)-0 ma, xreay, M -pug =...00 L/min, ¾..8.. = L/min, ¾ dosing eectronics..4r = LCD, 0(4)-0 ma, xreay, m cabe..34r = LCD, 0(4)-0 ma, xreay, M -pug ) inc. fronta gaskets ( pc. O-rings) Weight Sensor Weight Eectronics Mode PPS PVDF MIK- 0/ (½") approx. 80 g approx. 0 g MIK- 0/ (¾") approx. 90 g approx. g MIK- 30/3 (") approx. 70 g approx. 3 g MIK- 0/ (½") approx. 40 g approx. 00 g MIK- 60/6 (") on request on request MIK- 80/8 (¾") on request on request Mode MIK-...F3x0 MIK-...S30x MIK-...Lxx3 MIK-...C3xx MIK-...Exxx MIK-...xxx Weight approx. 80 g approx. 300 g approx. 0 g Tota Weight = Weight Sensor + Weight Eectronics 7

6 Fow Compact Magnetic-Inductive Fowmeter for conductivity iquids Mode MIK Dimensions Mode L L3 L H H MIK-xxx0A MIK-xxxA MIK-xxx0A MIK-xxxA MIK-xxx30A MIK-xxx3A MIK-xxx0A MIK-xxxA MIK-xxx60A MIK-xxx6A MIK-xxx80A MIK-xxx8A ½ ¾ ½ ¾ MIK-...F3x0, MIK-...S30x, MIK-...L3x3 MIK L3 L M L3 L 9 H 3 H L 9 H, 4, H L MIK-...C3xx MIK-...Ex4R, MIK-...x4R ø44, L3 L M 9 H 6 37, H ca. 6 9 H H L L L3 L 8

7 Compact Magnetic-Inductive Fowmeter for conductivity iquids Mode MIK Fow Dimensions connection set PVC-gue connection 3 L D D D3 L ½ not avaiabe ¾ Ø 3 Ø 6 Ø 0, 4 Ø 43 Ø 0 Ø 3 6 D D3 D ½ Ø 60 Ø 3 Ø 6 7 Ø 74 Ø 40 Ø ¾ Ø 03 Ø 63 Ø Dimensions connection set PVC-hose connection D D L ½ Ø 4 Ø 6 D D ¾ Ø 8 Ø 6 60 Ø Ø 0 67 ½ not avaiabe not avaiabe ¾ not avaiabe L Dimensions connection set st.st. wed-on ends AF L D D ½ 4 4 Ø 0, Ø AF D D ¾ 3 4 Ø 3, Ø Ø 9 Ø ½ 60 Ø Ø Ø 38 Ø 3 ¾ Ø 60,3 Ø 4 9