EM330 Installation and use instructions Three-phase energy analyzer for indirect connection (5A) with Modbus, pulse or M-Bus interface

Size: px

Start display at page:

Download "EM330 Installation and use instructions Three-phase energy analyzer for indirect connection (5A) with Modbus, pulse or M-Bus interface"

Lionel Grant
5 years ago
Views:

1 EM330 Instaation and use instructions Three-phase energy anayzer for indirect connection (5A) with Modbus, puse or M-Bus interface Code Genera warnings HAZARD: Live parts. Heart attack, burns and other injuries. Disconnect the power suppy and oad before instaing the anayzer. Protect terminas with covers. The energy anayzer shoud ony be instaed by quaified/authorized personne. These instructions are an integra part of the product. They shoud be consuted for a situations tied to instaation and use. They shoud be kept within easy reach of operators, in a cean pace and in good conditions. Description The anayzer measures active and reactive energy, summing (easy connection mode on) or separating imported energy from exported energy. It manages two energy tariffs using a digita input or Modbus command. It can be equipped with an optiona output to communicate measurements: puse output, RS485 Modbus port or M-Bus port. It measures two DIN modues, with backit LCD dispay with sensitive touch screen areas for page scroing and parameters setting. Code key (anayzer side) EM330-DIN. AVx. 3. a. a1. X Mode AV5: 400 V ac (mains votage), 5 (6) A, connection via TA AV6: V ac (mains votage), 5(6) A, connection via TA 3 or 4-wire threephase current system; two-phase current system, 3- wire H: auxiiary power V ac/dc L: auxiiary power V ac/dc Output type: O1: puse S1: Modbus RS485 port M1: M-Bus port No option incuded EM CARLO GAVAZZI Contros SpA 1

2 Product (Fig. 1) Area A B C D Description Current and communication connection terminas Backit LCD dispay with sensitive touch screen areas Mode, feature summary and seria number LED: binking red: puse weight proportionate to the TA and TV ratio resut,see "Technica Specifications" on page 14 orange on: tota active power negative. Contro ony run if the imported and exported energies are measured separatey (Measure = b). Fig. 1 Dispay (Fig. 2) Area A B Description Unit of measure area Specific section information area Signa area: : incorrect votage connections Fig. 2 C D : incorrect current connections : version S1 ony. Modbus command correcty received. : version S1 ony. Modbus command correcty sent to master. Command area EM CARLO GAVAZZI Contros SpA 2

3 Connection diagrams Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 10 Fig. 9 Fig EM CARLO GAVAZZI Contros SpA 3

4 Fig. 12 Fig. 13 Connection diagram (Fig. 3 Fig. 13) Figure Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Description Three-phase system current, 4-wire, unbaanced oad and three current transformers (TA). 315 ma fuse (F). Three-phase system current, 4- wire, unbaanced oad, three current transformers (TA) and three votage transformers (TV) Three-phase system current, 3-wire, unbaanced oad and three current transformers (TA). 315 ma fuse (F). Three-phase system current, 3-wire, unbaanced oad, three current transformers (TA) and two votage transformers (TV) Two-phase system current, 3-wire and two current transformers (TA). 315 ma fuse (F). Two-phase system current, 3-wire, two current transformers (TA) and two votage transformers (TV) Auxiiary power suppy Fig. 10 Digita input. Open contact = tariff 1, cosed contact = tariff 2. Fig. 11 Fig. 12 Fig. 13 Puse output (two possibe connections) VDC: externa votage (direct current) Out: output contact (transistor PNP open coector) GND: ground output contact (transistor PNP open coector) Open coector outputs: the oad resistance (Rc) must be designed so that the cosed contact current is under 100 ma (V on is equa to 1 V dc). DC votage (V off ) must be ess than or equa to 80 V. RS485 Modbus with Master Note: additiona instruments with RS485 are connected in parae. The seria output must ony be terminated on the ast network device connecting terminas B+ and T. For connections onger than 1000 m or networks with more than 160 instruments, use a signa repeater. M-Bus with Master EM CARLO GAVAZZI Contros SpA 4

5 Connection check The anayzer checks whether connections are correct and signas any fauts. The check can be disabed using the Insta parameter, see "Parameters (Fig. 17)" on page 9. Initia assumptions The check is based on some initia assumptions on the system to be measured. Specificay, it is assumed that each system phase is characterized by: a oad with PF>0.766 (<40 ) power factor if inductive or PF>0.996 (<5 ) if capacitive current at east equa to 10% rated current (primary current transformer) Contros and signas Foowing are the contros in the order in which they are run and corresponding signas: Contro Signa Votage order Votage and current correspondence. x, y = number of current phases connected to a non corresponding votage. Current direction *. Check phase 1 first, then 2 and asty 3. x = number of phases invoved in the faut xy x NOTE *: contro ony run if the imported and exported energies are measured separatey (Measure = b) EM CARLO GAVAZZI Contros SpA 5

6 Using the anayzer Fig. 14 Commands (Fig. 14) Navigation Parameter settings Operation Command Operation Command View the next page View the previous page Open the programming section Exit the programming section Open the information section Exit the information section A B C C (page End) D D Increase a parameter vaue View the next vaue option Decrease a parameter vaue View the previous vaue option Confirm a vaue Open the parameter settings page A A B B C C Navigation (Fig. 15) Section A B C Function Measurement pages dispayed by defaut when turned on. Pages are characterized by the reference unit of measure. Parameter settings pages. Require ogin password. The pages dispay information and set parameters without having to enter a password. NOTE: the initia measurement page set in HoME is dispayed after 120 s of disuse. Fig EM CARLO GAVAZZI Contros SpA 6

7 Fig. 16 Measurement (Fig. 16) NOTE *: ony dispayed if fu dispay mode is set (Mode = Fu). Genera measurement pages Page Description Code A B C D E F G H Tota imported active energy** Tota active power 00 Tota exported active energy*** Tota active power 01 Tota imported active energy** Average system mains votage 02 Tota imported active energy** Average system phase votage 03 Tota imported active energy** Power factor (L = inductive, C = capacitive) 04 Tota imported active energy** Frequency 05 Tota imported reactive energy** Tota reactive power 06 Tota exported reactive energy*** Tota reactive power EM CARLO GAVAZZI Contros SpA 7

8 Page Description Code I J K Tota imported active energy** Tota apparent power Tota imported active energy** Requested average power (d = demand) cacuated for the set interva. The vaue remains the same for the entire interva. It is = 0 during the first start up interva. Maximum requested power (Pd = Peak demand) reached since ast reset Tota imported active energy** Current tariff (t1 = tariff 1, t2 = tariff 2). Dispayed if tariff management is on (Tariff = on). Active energy imported with the current tariff. Dispayed if tariff management is on (Tariff = on). NOTE **: if easy connection is on (Measure = A), it indicates tota reactive energy without considering the direction. NOTE ***: dispays whether imported and exported energy are measured separatey (Measure = b). Singe phase measurement pages NOTE: the phase measurement pages and indicated information for each depend on the type of system anayzed. Page Description Code L Imported active energy. If easy connection is on (Measure = A), it indicates tota energy without considering the direction. M Apparent power 13 N Imported reactive energy 14 O Power factor (L = inductive, C = capacitive) 15 P Phase votage 16 Q Mains votage 17 R Current 18 S Active power 19 Measurement fauts If the measured signa exceeds the admitted anayzer imits, a specific message appears: EEE binking: the measured vaue is out of imits EEE on: the measurement depends on a vaue that is out of imits NOTE: active and reactive energy measurements are dispayed but do not change EM CARLO GAVAZZI Contros SpA 8

9 Fig. 17 Parameters (Fig. 17) Shared pages Page Code Description Vaues PASS P1 Enter current password Current password defaut password. npass P2 Change password Four digits ( ) SYStEM P3 System type Ct ratio P4 Current transformer ratio (TA) * Vt ratio P5 Votage transformer ratio (TV) * 3Pn: three phase system, 4-wire/ 3P: three-phase system, 3-wire/ 2P: two-phase system, 3-wire NOTE *: the resut of the ratio between the current and votage transformers must be under 1054 for AV5 anayzers and under 3148 for AV6. MEASurE P6 Measurement type A : easy connection, measures tota energy without considering the direction/ b : separatey measures imported and exported energy InStALL P7 Connection check On: enabed/ Off: disabed P int P8 MOdE P9 Dispay mode Average power cacuation interva (minutes) 1 30 Fu : compete mode/ Easy : reduced mode. Measurements not dispayed are sti sent via seria port. tariff P10 Tariff management On: enabed/ Off: disabed EM CARLO GAVAZZI Contros SpA 9

10 Page Code Description Vaues HoME P11 Measurement page dispayed when turned on and after 120 seconds of disuse reset P17 Enabe energy tariff, maximum requested power and partia active and reactive energy reset (the atter ony sent via seria port) End P18 Return to the initia measurement page Pages specific to the S1 version For fu dispay mode (Mode = Fu): 0 19 For reduced dispay mode (Mode = Easy): 0 3, 6, 7, 10/11, 18 To earn the page code see "Measurement (Fig. 16)" on page 7. No: cance reset/ Yes: enabe reset Page Code Description Vaues AddrESS P14 Modbus address baud P15 Baud rate (kbps) 9.6/ 19.2/ 38.4/ 57.6/ PArITY P16 Parity Even/ No STOP bit P16 2 Ony if no parity. Stop bit. 1/ 2 Pages specific to the O1 version Page Code Description Vaues PULSE P12 Puse time (ON time, miiseconds) 30/ 100 PurAtE P12 2 Puse weight. Mutipes of 100 impuses/kwh. Pages specific to the M1 version For 30 ms: For 100 ms: Page Code Description Vaues Pr I Add P13 M-Bus primary address baud P15 Baud rate (kbps) 0.3/ 2.4/ EM CARLO GAVAZZI Contros SpA 10

11 Fig. 18 Setting a parameter (Fig. 18) Procedure exampe: how to set P int=24. NOTE: the first dispayed vaue is the current one. Settings are appied when the vaue is confirmed.the vaue is being edited if Prg appears, the set vaue is out of range if Err appears. After 120 s of disuse on a vaue being set, the tite page is dispayed (P int in the figure) and Prg disappears. After another 120 s, the measurement page set in HoME returns EM CARLO GAVAZZI Contros SpA 11

12 Fig. 19 Information (Fig. 19) Shared pages Page Code Description YEAr InFO 1 Year of manufacture SErIAL n InFO 2 Seria number, corresponds to the one indicated on the front print, without the initia 'K' revision InFO 3 PuLS Led InFO 4 SYStEM P3 System type Firmware revision A.XX: A= puse output, B= Modbus seria C= M-Bus seria XX = sequentia revision number (i.e.: 00, 01, 02) Front LED puse weight, proportionate to the resut of the TA and TV ratio,see "Technica Specifications" on page 14. Ct ratio P4 Current transformer ratio (TA) Vt ratio P5 Votage transformer ratio (TV) MEASurE P6 Measurement type InStALL P7 Enabing connection check P int P8 Requested average power cacuation interva ModE P9 Dispay mode tariff P10 Enabing tariff management status and any current tariff HoME P11 Measurement page set as home page EM CARLO GAVAZZI Contros SpA 12

13 Pages specific to the S1 version Page Code Description AddrESS P14 Modbus address, 01 by defaut baud P15 Baud rate PArITY P16 Parity StoP bit P16 2 Stop bit Pages specific to the O1 version Page Code Description PULSE P12 Duration PuL rate P12 2 Puse weight Pages specific to the M1 version Page Code Description Pr I Add P13 M-Bus primary address baud P15 Baud rate SEC Add InFO 5 M-Bus secondary address, univoca and set during production EM CARLO GAVAZZI Contros SpA 13

14 Technica Specifications Eectrica specifications LED specifications Power Consumption Base current Maximum current Minimum current Start up current Working votage Frequency Accuracy cass Auxiiary power suppy H: V ac/dc L: V ac/dc 1 W, 10 VA 5 A 6 A 0.25 A 0.01 A AV5: 400 V ac (mains votage) AV6: V ac (mains votage) Hz Active energy: Cass 1 (EN ) Cass B (EN ) Reactive energy: Cass 2 (EN ) Puse weight Duration Coor Proportionate to the resut of TA and TV ratios: Weight (impuses/kwh) TA * TV 1 > < 7 90 ms Red and orange Genera features Terminas Protection grade Dimensions See Fig , 17, 18: section 1 4 mm 2, torque 0.4 Nm 5 16: section 1.5 mm 2, torque 0.4 Nm Front: IP51, terminas: IP20 Environmenta specifications Working temperature Storage temperature From -25 to +55 C/from -13 to +131 F From -30 to +80 C/from -22 to +176 F Output specifications Puse output Modbus RS485 port output M-Bus port output Proportionate to measured active energy (EN ) Modbus RTU protoco M-Bus protoco, (EN ) Fig. 20 NOTE: to set output parameters, see "Parameters (Fig. 17)" on page EM CARLO GAVAZZI Contros SpA 14

15 Ceaning Use a sighty dampened coth to cean the instrument dispay; do not use abrasives or sovents. Service and warranty In the event of mafunction, faut or for information on the warranty, contact the CARLO GAVAZZI branch or distributor in your country. Conformity NOTE: for updated information /95/EC (Low Votage) 2004/108/EC (Eectro Magnetic Compatibiity) EN EN , 6-3 IEC IEC IP51 EM330 Instaation and use instructions COPYRIGHT 2014 downoad the PDF: CARLO GAVAZZI Contros SpA via Safforze, Beuno (BL) Itay info@gavazzi-automation.com info: fax:

EM341 Installation and use instructions

EM341 Installation and use instructions EM341 Intallation and ue intruction 65 A direct connection three-phae energy analyzer with Modbu and digital interface General warning HAZARD: Live part. Heart attack, burn and other injurie. Diconnect