Commercially-available connectors are used so that lead time and spare part numbers can both be reduced Conventional lead time

Size: px

Start display at page:

Download "Commercially-available connectors are used so that lead time and spare part numbers can both be reduced Conventional lead time"

Julianna McKenzie
6 years ago
Views:

3 PHOTO PHOTO Digita Sensor SERIES Reated Information Genera terms and conditions... P. Sensor seection guide...p.~ / P.6~ Gossary of terms / Genera precautions...p.983~ / P.986~ seection... P.63~ Conforming to EMC Directive PNP output type avaiabe Timer Interference prevention ight intensity monitor MEASURE CONTRO SUNX website http://www.

check both the threshod vaue and incident ight intensity at the same time, aowing for cear and intuitive contro of the sensor s functions.

Commerciay-avaiabe connectors are used so that ead time and spare part numbers can both be reduced The connectors used are commerciay-avaiabe connectors, so that processing costs and ead time

1 3 PHOTO PHOTO Digita Sensor SERIES Reated Information Genera terms and conditions... P. Sensor seection guide...p.~ / P.6~ Gossary of terms / Genera precautions...p.983~ / P.986~ seection... P.63~ Conforming to EMC Directive PNP output type avaiabe Timer Interference prevention ight intensity monitor MEASURE CONTRO SUNX website Automatic sensitivity Test input Taking fiber sensors to the next eve Setup is made simpe, using a dua digita dispay s Sensor Ampifiers FX-3 FX- FX-3-F The dua digita dispay aows users to check both the threshod vaue and incident ight intensity at the same time, aowing for cear and intuitive contro of the sensor s functions. The threshod vaue can be adjusted simpy by pressing the (UP) key or the (DOWN) key, so that the output operation can be controed with high precision, directy from the RUN mode. Commerciay-avaiabe connectors are used so that ead time and spare part numbers can both be reduced The connectors used are commerciay-avaiabe connectors, so that processing costs and ead time required for carrying out processing after purchase of the sensors can be greaty reduced. The same connection parts as the DP- series of digita pressure sensors and the PM-6 series of micro photoeectric sensors can be used. Commerciay-avaiabe press-fit connectors are used, so that the processing costs for connection cabes can be greaty reduced. Threshod vaue Incident ight intensity Connection with a commerciay-avaiabe connector Conventiona (cabe type) Sensor purchase and preparation Harness processing by outside order Conventiona ead time Harness processing by outside order after sensor preparation Customer Sensor preparation Harness processor Harness Processing Sensor instaation From now on (buit-in connector type) Sensor purchase and preparation Harness processing by outside order Using cabes with connectors Purchase of sensors and cabe with connectors Customer Sensor preparation Harness processor ead time from now on Harness processing by outside order Harness Processing ead time further reduced Customer Sensor preparation Sensor instaation Sensor instaation Reduced Reduced Reduced ead time

ORDER GUIDE P.6 ~ IST OF S P.8 ~ SPECIFICATIONS P.33 I/O CIRCUIT DIAGRAMS P.3 ~ SENSING CHARACTERISTICS P.35 ~ Digita Sensor SERIES PRECAUTIONS FOR PROPER P.36 ~ DIMENSIONS P.

2 ORDER GUIDE P.6 ~ IST OF S P.8 ~ SPECIFICATIONS P.33 I/O CIRCUIT DIAGRAMS P.3 ~ SENSING CHARACTERISTICS P.35 ~ Digita Sensor SERIES PRECAUTIONS FOR PROPER P.36 ~ DIMENSIONS P.38 Saving-space with a width of 9 mm.35 in The sensor is very sim, yet equipped with a dua digita dispay. Both space saving and ease of use have been achieved. 9 mm.35 in Equipped with a four-chemica emitting eement A stabe amount of emitted ight is ensured due to contro of the aging of the emitting eement to the maximum imit. [Stabe sensing comparison] A three eve navigation structure provides easy access to the sensor s functions, from basic to advanced Setting detais are divided into three eves for simpe operation, so that s for norma operation are made in RUN mode, basic s are made in SET mode, and advanced functions are set in PRO mode. This makes confi guration much easier to understand and carry out. ight-emitting amount ong-term stabiity Three-chemica emitting eement Time PHOTO PHOTO Simpe RUN MODE SET MODE RUN mode Functions used during norma operation [Function tabe] Changing threshod vaues Key ock Quick s Code s SET mode Functions used when initiaizing the sensor and carrying out maintenance [Function tabe] Teaching -ON / D-ON Timer Attenuation function Interference prevention function PRO mode MEASURE CONTRO Specia and detaied Quick code input function [RUN mode] Sensor s can be made simpy by seecting preset vaues. PRO MODE Quick numbers (summary) No. Output operation Equipped with a fu compement of digita fiber sensor functions [Function tabe] Shift Externa input Reset GETA ECO Dispay reversing Surpus vaue dispay Copy Threshod tracking ight-emitting amount seection Timer Dark-ON OFF None Dark-ON ON None Dark-ON OFF OFF-deay ms Dark-ON ON OFF-deay ms ight-on ON ON-deay ms ight-on OFF ON-deay ms s Sensor sensor Ampifiers FX-3 FX- FX-3-F ight-on ON ON-deay ms ight-on OFF ON-deay ms Smooth support via teephone [RUN mode] Confi rmation can be carried out smoothy via teephone by simpy quoting numbers. This can be of great assistance when deaing with foreign country customers.

5 Digita Sensor SERIES PHOTO PHOTO Teaching using ON / OFF buttons [SET mode] Simpy press the ON button when an object is present and OFF when it is not.

<Setting exampe> Thru-beam type / Retrorefective type Refective type Object present ON Object absent OFF Attenuation function [SET mode] If the ight receiving eve becomes saturated when sensing over

3 5 Digita Sensor SERIES PHOTO PHOTO Teaching using ON / OFF buttons [SET mode] Simpy press the ON button when an object is present and OFF when it is not. There is no need to switch s or make judgments between ight-on ( ) and Dark-ON ( ). <Setting exampe> Thru-beam type / Retrorefective type Refective type Object present ON Object absent OFF Attenuation function [SET mode] If the ight receiving eve becomes saturated when sensing over short distances or when sensing transparent objects or minute objects, the ight emitting amount can be reduced so that stabe sensing can be provided without needing to change the response time. Interference prevention function [SET mode] FX- : Interference prevention for up to 3 units : Interference prevention for up to units The emission frequencies can be set separatey for each unit in order to avoid interference. The emitted ight f ashes whie is in progress, so that you can see at a gance which fi ber sensor is currenty being set. In addition, this interference prevention is not done by using optica communication. This means that there is no need to pace the ampifi ers cose together ike there was before, and so the ampifi ers can be set up apart from each other. * When the emission frequencies are changed, the response times wi aso change. MEASURE CONTRO Object present ON Object absent OFF s Sensor Ampifiers FX-3 FX- FX-3-F imit teaching function This carries out teaching and sets threshod vaues ony when no object is present (when the incident ight amount is stabe). This is usefu when sensing objects if there are other objects in the background and when sensing minute objects. Teaching can aso be carried out using externa input. Threshod tracking function [PRO mode] This function seeks changes in the ight emitting amount resuting from changes in the environment over ong periods (such as dust eves), so that the incident ight intensity can be checked at desired intervas and the threshod vaues can be reset automaticay. Incident ight intensity GETA function [PRO mode] Threshod vaue Current vaue The amount of ight received when there is no object Time The dispay vaue for the incident ight intensity can be offset by the desired vaue (target vaue). The target vaue can be set to between and, (in increments of ). For exampe, if the incident ight intensity is,5 and the target vaue is set to,, then, wi appear in the digita dispay. Variations in the amount of ight received The emitted ight and output indicator fash at the same frequency. Muti-function externa input [PRO mode] Settings such as emission hat, imit / auto teaching and ECO s can be carried out via externa input. Aert function [PRO mode] (Brown) +V (Back) Output (White) Externa input (Bue) V Externa input ines are equipped as standard When the amount ight received approaches the threshod vaue, the dispay can be made to bink in order to aert the operator. <When using at a shift amount of % and a threshod vaue of,> The amount of ight received ranges from about 9 to, when the digita indicator fashes. Incident ight intensity, 9 Range of the digita indicator fashing (margin: sma) Threshod vaue of, Unify at 5 using the GETA function The digita indicator fashes.

FX-P-CC (Note ) -Z (Note 3) P (Note ) P-Z (Note 3) -CC P-CC Emitting eement Red ED Output NPN open-coector NPN open-coector PNP open-coector PNP open-coector NPN open-coector PNP open-coector coector

4 Digita Sensor SERIES 6 Ampifiers Standard type ong sensing range type ORDER GUIDE Type Appearance Mode No. M8 pug-in connector type M8 pug-in connector type Cabe set (Note ) M8 pug-in connector type M8 pug-in connector type Cabe set (Note ) FX- (Note ) FX--Z (Note 3) FX-P (Note ) FX-P-Z (Note 3) FX--CC FX-P-CC (Note ) -Z (Note 3) P (Note ) P-Z (Note 3) -CC P-CC Emitting eement Red ED Output NPN open-coector NPN open-coector PNP open-coector PNP open-coector NPN open-coector PNP open-coector coector NPN open-coector NPN open-coector PNP open-coector PNP open-coector NPN open-coector PNP open-coector Accessory CN-A-C Connector attached cabe m 6.56 ft * Ony incude cabe set type Notes: ) The connector attached cabe CN-A-C is suppied with the ampifi er. ) Make sure to use the optiona connector attached cabe CN-A(-R)-C or the connector CN-A, or a connector manufactured by J.S.T. Mfg. Co., td. (contact: SPHD-T-P.5, housing: PAP-V-S) 3) Make sure to use the optiona M8 connector attached cabe CN-A-C. CONTRO Designation Mode No. Description Connector attached cabe Connector attached cabe (Fexibe type) M8 connector attached cabe CN-A-C CN-A-C (Note) CN-A-C3 CN-A-C5 CN-A-R-C CN-A-R-C CN-A-R-C3 CN-A-R-C5 m 3.8 ft m 6.56 ft 3 m 9.83 ft 5 m 6. ft m 3.8 ft m 6.56 ft 3 m 9.83 ft 5 m 6. ft. mm -core cabtyre cabe with connector on one end Cabe outer diameter: ø3.7 mm ø.6 in CN-A-C m 6.56 ft For M8 pug-in connector type The connector on one end CN-A-C5 5 m 6. ft Cabe outer diameter: ø mm ø.57 in Connector CN-A Set of housings and contacts Protection cover FC-FX- This protects the operating surfaces. Ampifier mounting bracket MS-DIN- End pates MS-DIN-E Mounting bracket for ampifi er When it moves depending on the way it is instaed on a DIN rai, these end pates ensure that a ampifi ers are mounted together in a secure and fuy connected manner. Two pcs.per set Note: The connector attached cabe CN-A-C is suppied with the cabe set type FX- (P)-CC. Recommended connector Contact: SPHD-T-P.5, Housing: PAP-V-S (Manufactured by J.S.T. Mfg. Co., td.) Note: Contact the manufacturer for detais of the recommended products. Recommended crimping too Mode No.: YC-6R (Manufactured by J.S.T. Mfg. Co., td.) Note: Contact the manufacturer for detais of the recommended products. Connector attached cabe CN-A(-R)-C Connector CN-A Housing M8 connector attached cabe CN-A-C ø9 ø.35 Protection cover FC-FX- Contact ø ø.57 M8 connector attached cabe CN-A-C Fixing ring Ampifier mounting bracket MS-DIN- s Sensor Ampifiers FX-3 FX- FX-3-F

5 7 Digita Sensor SERIES CONTRO s Sensor sensor Ampiifiers Ampifiers FX-3 FX- FX-3-F IST OF S Thru-beam type (one pair set) s are isted in aphabetic order. Refer to p.63~ for detais of each fi ber. Mode No. Sensing range (mm in) (Note ) Dimensions Standard type FX- ong sensing range type FT-A8, , (Note ) P.6 FT-A3 3, (Note ) 3, (Note ) P.6 FT-AFM P.6 FT-AFME P.6 FT-B8 5.78, P.6 FT-E P.6 FT-E P.6 FT-FM P.6 FT-FMS P.6 FT-FMS P.6 FT-FM 9, , P.6 FT-H3-FM P.6 FT-H-J-S (Note 3) P.7 FT-H-J3-S (Note 3) P.7 FT-H-J5-S (Note 3) P.7 FT-H-M P.7 FT-H-VJ5-S (Note 3) P FT-H-VJ8-S (Note 3) P.7 FT-HW-M 3.8 P.7 FT-H3-MV-S (Note ) P.7 FT-H35-M P FT-H35-MS6 P.7 FT-H8Y ,3 9.6 P.7 FT-K8, , 8. P.8 FT-KV P.8 FT-KV8, , 8. P.8 FT-8Y, 3.37,6.36 P.8 FT-NFM P.8 FT-NFMS P.8 FT-NFMS P.8 FT-P P.8 FT-P P.8 FT-P P.8 FT-P P.8 Mode No. Sensing range (mm in) (Note ) Dimensions Standard type FX- ong sensing range type FT-PS P.9 FT-R P.9 FT-SFM P.9 FT-SFM , 9.88 P.9 FT-SFMSV P.9 FT-SNFM P.9 FT-T P.9 FT-V, 39.37, P.9 FT-V P.9 FT-V P.9 FT-V8Y P.9 FT-W P.9 FT-W P. FT-WA8, , (Note ) P. FT-WA3 3, (Note ) 3, (Note ) P. FT-WKV , 86.6 P. FT-WR P. FT-WR , P. FT-WS P. FT-WS P. FT-WS P. FT-WS , P. FT-WV P. FT-WZ P. FT-WZHB P. FT-WZ , P. FT-WZ7HB P. FT-WZ P. FT-WZ8E , P. FT-WZ8H, 7.,8.36 P. FT-Z , P. FT-Z8E , P. FT-Z8H, ,.7 P. FT-Z8Y 5.7 3,.7 P. FT-P8X P.8 Notes: ) Pease take care that the sensing range of the free-cut type fi ber may be reduced by % max. depending upon how the fi ber is cut. ) The fi ber cabe ength practicay imits the sensing range to 3,5 mm in ong. 3) Heat-resistant joint fi bers and ordinary-temperature side fi bers (FT-FM) are sod as a set. Pease refer to p.93~ for detais. ) Sod as a set comprising vacuum-resistant type fi ber + photo-termina (FV-BR) + fi ber at atmospheric side (FT-J8). Pease refer to p.9~ for detais.

6 Digita Sensor SERIES 8 IST OF S Retrorefective type s are isted in aphabetic order. Refer to p.63~ for detais of each fi ber. Mode No. Sensing range (mm in) (Note, ) Standard type FX- ong sensing range type Dimensions FR-KV 5 to.59 to 5 to to.73 P. FR-KZ P. FR-KZE P. FR-WKZ to 55 to.65 to 83 to P. Notes: ) Pease take care that the sensing range of the free-cut type fi ber may be reduced by % max. depending upon how the fi ber is cut. The sensing range of FR-WKZ is specified for the RF-3. The sensing range of FR-KZ, FR-KZE and FR-KV is specified for the attached ref ector. The sensing ranges when using in combination with the FR-WKZ ref ector (optiona) are given in the beow tabe. Ampifi er Ref ector FX- FR-WKZ + RF- to 7 to to, to 3.37 FR-WKZ + RF- to,3 to 5.8 to,6 to.36 FR-WKZ + RF-3 to, to 78.7 to, to 57.8 ) The sensing range of FR-WKZ is the possibe range for the ref ector or ref ective tape. The fi ber can detect an object ess than mm in away. However, note that if there are any white or highy-ref ective surfaces near the fi ber, ref ected incident ight may affect the fi ber. If this occurs, adjust the threshod vaue of the ampifi er unit before use. The sensing range of FR-KZ(E) is the possibe range for the ref ector. However, if the fi ber to detect objects passing within to mm to.787 in from the fi ber, unstabe detection may resut. The sensing range of FR-KV is the possibe range for the ref ector. The fi ber can detect an object ess than 5 mm.59 in away. Refective type CONTRO s are isted in aphabetic order. Refer to p.63~ for detais of each fi ber. Mode No. Sensing range (mm in) (Note, ) Dimensions Standard type FX- ong sensing range type FD-A P.3 FD-AFM P.3 FD-AFME P.3 FD-B P.3 FD-E P.3 FD-E P.3 FD-EG P.3 FD-EG P.3 FD-EG P.3 FD-EN5S P.3 FD-ENMS P. FD-F FD-F Appicabe pipe diameter: Outer dia. ø6 to ø6 mm ø.36 to ø. in transparent pipe [PFA (f uorine resin) or equivaenty transparent pipe, wa thickness mm.39 in] Appicabe pipe diameter: Outer dia. ø6 to ø6 mm ø.36 to ø. in transparent pipe [PVC (viny choride), f uorine resin, poycarbonate, acryic, gass, wa thickness to 3 mm.39 to.8 in] P. P. FD-F8Y P. FD-FM 6. P. FD-FMS P FD-FMS P. Mode No. Sensing range (mm in) (Note, ) Dimensions Standard type FX- ong sensing range type FD-G P. FD-G6X P. FD-H3-FM 8. P. FD-H8-3 to to.39 to 5 to.98 P.5 FD-H P.5 FD-H-M P.5 FD-H3-KZV-S (Note 3) 5 to 8.98 to 3.5 to.39 to 8.66 P.5 FD-H3-3 to 9.79 to.35 to 7 to.669 P.5 FD-H3-3V-S (Note 3).5 to to.56 to to.33 P.5 FD-H35-S P.6 FD-H35-M P FD-H35-MS6 P.6 FD-G P. FD-P P.7 Notes: ) The standard sensing objects of the sensing ranges vary depending on the fi bers. Refer to p.7~ for detais. ) Pease take care that the sensing range of the free-cut type fi ber may be reduced by % max. depending upon how the fi ber is cut. 3) Sod as a set comprising vacuum-resistant type fi ber + photo-termina (FV-BR) + fi ber at atmospheric side (FT-J8). Pease refer to p.9~ for detais. FD- FD- 5 to 8.97 to.35 (Convergent point 6.36) 3 to.8 to.55 (Convergent point 8.35) to 7.39 to.669 (Convergent point 6.36).5 to 6.59 to.63 (Convergent point 8.35) P.6 P.6 FD-3 to 9 to.78 to 5 to.98 P.6 FD- to 6 to.36 to 8 to.35 P.6 FD-S to.5 to.77 to 5.5 to.7 P.6 FD-5 to to.575 to 5 to.969 P.6 FD-6 6 to 3.63 to.8 to 5.7 to.969 P.6 FD-NFM P.7 FD-NFMS P.7 FD-NFMS P.7 s Sensor Ampifiers FX-3 FX- FX-3-F

7 9 Digita Sensor SERIES CONTRO IST OF S Refective type s are isted in aphabetic order. Refer to p.63~ for detais of each fi ber. Mode No. Sensing range (mm in) (Note, ) Dimensions Standard type FX- ong sensing range type FD-P P.7 FD-P P.7 FD-P P.7 FD-P P.7 FD-P8X P.7 FD-R P.7 FD-S P.7 FD-SFMSV P.7 FD-SNFM P.8 FD-T P.8 FD-T P.8 FD-V P.8 FD-W P.8 FD-W P.8 Mode No. Sensing range (mm in) (Note, ) Dimensions Standard type FX- ong sensing range type FD-WG P.8 FD-WKZ to to 7.87 to to P.8 FD-W 7 to.76 to.7 6 to to.53 (Convergent point 8.35) (Convergent point 8.35) P.8 FD-W8 to.5.39 to.77.5 to 6.5. to.56 P.9 FD-WS P.9 FD-WSG P.9 FD-WT P.9 FD-WT P.9 FD-WV P.9 FD-WZ P.9 to.79 to.787 to 7.39 to.756 FD-WZHB P.9 FD-WZ7 to to P.9 FD-WZ7HB to 6.39 to.36.5 to 8. to 7.87 P.9 Notes: ) The standard sensing objects of the sensing ranges vary depending on the fi bers. Refer to p.7~ for detais. ) Pease take care that the sensing range of the free-cut type fi ber may be reduced by % max. depending upon how the fi ber is cut. 3) Sod as a set comprising vacuum-resistant type fi ber + photo-termina (FV-BR) + fi ber at atmospheric side (FT-J8). Pease refer to p.9~ for detais. s Sensor sensor Ampiifiers Ampifiers FX-3 FX- FX-3-F

8 Digita Sensor SERIES 3 ens (For thru-beam type fiber) The dimensions are on p.~. For thru-beam type fi ber Designation Mode No. Description Expansion ens (Note ) Superexpansion ens (Note ) Side-view ens Expansion ens for vacuumresistant fi ber (Note ) Side-view ens for vacuumresistant fiber FX-E FX-E FX-SV FV-E FV-SV Increases the sensing range by 5 times or more. Ambient temperature: 6 to +35 C 76 to +66 F (Note 3) Tremendousy increases the sensing range with arge diameter enses. Ambient temperature: 6 to +35 C 76 to +66 F (Note 3) Beam axis is bent by 9. Ambient temperature: 6 to +3 C 76 to +57 F (Note 3) Sensing range (mm in) [ens on both sides] Ampifi er FX- FT-B8, , (Note ) FT-FM, FT-T8 3, 8. 3, (Note ) FT-R8, , (Note ) FT-W8 3, 8. 3, (Note ) FT-P8, FT-P6 3, (Note ) 3, (Note ) FT-P8X, (Note ), (Note ) FT-H35-M, , (Note ) FT-HW-M,3 5.8, (Note ) FT-H-M, (Note ), (Note ) FT-H-J-S, FT-H-J3-S, FT-H-J5-S, , (Note ) Sensing range (mm in) [ens on both sides] Ampifi er FX- FT-B8, FT-FM, FT-R8, FT-W8, FT-P8, FT-P6 3, (Note ) 3, (Note ) FT-P8X, (Note ), (Note ) FT-H35-M 3, (Note ) 3, (Note ) FT-HW-M, FT-H-M, (Note ), (Note ) FT-H3-FM 3, (Note ) 3, (Note ) FT-H-J-S, FT-H-J3-S, FT-H-J5-S 3, (Note ) 3, (Note ) Sensing range (mm in) [ens on both sides] Ampifi er FX- FT-B , FT-FM, FT-T , FT-W ,3 5.8 FT-P , 55.8 FT-P FT-P8X 55.65, FT-H35-M FT-HW-M FT-H-M FT-H-J-S, FT-H-J3-S, FT-H-J5-S Sensing range increases by Sensing range (mm in) [ens on both sides] (Note ) times or more. Ampifi er Ambient temperature: FX- 6 to +35 C 76 to +66 F FT-H3-MV , (Note 3) Beam axis is bent by 9. Ambient temperature: 6 to +3 C 76 to +57 F (Note 3) Sensing range (mm in) [ens on both sides] (Note ) Ampifi er FX- FT-H3-MV , CONTRO s Sensor Ampifiers FX-3 FX- FX-3-F Notes: ) Be carefu when instaing the thru-beam type fi ber equipped with the expansion ens, as the beam enveope becomes narrow and aignment is diffi cut. Especiay when instaing a fi ber with many cores (sharp bending fi bers and heat-resistant gass fi ber), pease be sure to use it ony after you have adjusted it suffi cienty. ) The fi ber cabe ength practicay imits the sensing range to 3,5 mm in ong (FT-HW-M, FT-P8X and FT-H-M:,6 mm 6.99 in). 3) For detais on the ambient temperatures for the fi bers which being combined, refer to p.~. ) The fi ber cabe ength for the FT-H3-MV is m 3.8 ft. The sensing ranges in (ong sensing range type) take into account the ength of the FT-J8 atmospheric side fi ber.

9 3 Digita Sensor SERIES ens (For refective type fiber) The dimensions are on p.~. CONTRO s Sensor sensor Ampiifiers Ampifiers FX-3 FX- FX-3-F For ref ective type fi ber Designation Mode No. Description Pinpoint spot ens FX-MR Zoom ens FX-MR Finest spot ens Finest spot ens Zoom ens Side-view type FX-MR3 FX-MR6 FX-MR5 Screw-in depth Distance to foca point Distance to foca point Distance to foca point Spot diameter Spot diameter Screw-in depth Spot diameter Pinpoint spot of ø.5 mm ø. in. Enabes detection of minute objects or sma marks. Distance to foca point: 6 ± mm.36 ±.39 in Appicabe fi bers: FD-WG, FD-G Ambient temperature: to +7 C to +58 F (Note ) The spot diameter is adjustabe from ø.7 to ø mm ø.8 to ø.79 in according to how much the fi ber is screwed in. Appicabe fi bers: FD-WG, FD-G Ambient temperature: to +7 C to +58 F (Note ) Accessory: MS-EX-3 (mounting bracket) Extremey fi ne spot of ø.3 mm ø. in achieved. Appicabe fi bers: FD-WG, FD-G, FD-EG, FD-EG, FD-EG3, FD-G6X, FD-G6 Ambient temperature: to +7 C to +58 F (Note ) Extremey fi ne spot of ø. mm ø. in achieved. Appicabe fi bers: FD-WG, FD-G, FD-EG, FD-EG, FD-EG3, FD-G6X, FD-G6 Ambient temperature: to +6 C to + F (Note ) FX-MR is converted into a side-view type and can be mounted in a very sma space. Appicabe fi bers: FD-WG, FD-G Ambient temperature: to +7 C to +58 F (Note ) Sensing range for FX- (mm in) (Note ) Screw-in depth Distance to foca point Spot diameter 7 mm.76 in mm.7 in mm.55 in ø.7 ø.8 ø. ø.7 ø. ø.79 Sensing range for FX- (mm in) (Note ) mode No. Distance to foca point Spot diameter FD-EG3 FD-EG FD-EG FD-WG/G, FD-G6X/G6 7.5 ±.5.95 ±. 7.5 ±.5.95 ±. 7.5 ±.5.95 ±. 7.5 ±.5.95 ±. ø.5 ø.6 ø. ø.8 ø.3 ø. ø.5 ø. Sensing range for FX- (mm in) (Note ) mode No. Distance to foca point Spot diameter FD-EG3 FD-EG FD-EG FD-WG/G, FD-G6X/G6 7 ±.5.76 ±. 7 ±.5.76 ±. 7 ±.5.76 ±. 7 ±.5.76 ±. ø. ø. ø.5 ø.6 ø. ø.8 ø. ø.6 Sensing range for FX- (mm in) (Note ) Screw-in depth Distance to foca point Spot diameter 8 mm.35 in mm.39 in mm.55 in ø.5 ø. ø.8 ø.3 ø3. ø.8 Notes: ) The sensing ranges are the vaues when used in combination with FX- (standard type). Pease contact our offi ce for detais on sensing ranges for other types of ampifi er. ) For detais on the ambient temperatures for the fi bers which being combined, refer to p.~.

10 Digita Sensor SERIES 3 SPECIFICATIONS Refer to p.~ for fi ber specifi cations. Type Standard type ong sensing range type Cabe set Cabe set NPN output FX-(-Z) (Note ) FX--CC (-Z) (Note ) -CC Item PNP output FX-P(-Z) (Note ) FX-P-CC P(-Z) (Note ) P-CC Mode No. Suppy votage Power consumption Output Output operation Short-circuit protection Externa input Response time Sensitivity Operation indicator Digita dispay Fine sensitivity adjustment function Timer function Attenuation function Interference prevention function Environmenta resistance Ambient temperature to V DC ± % Rippe P-P % or ess Norma operation: 7 mw or ess (Current consumption 3 ma or ess at V suppy votage) ECO mode: 6 mw or ess (Current consumption 5 ma or ess at V suppy votage) <NPN output type> <PNP output type> NPN open-coector PNP open-coector Maximum sink current: ma Maximum source current: ma Appied votage: 3 V DC or ess (between output and V) Appied votage: 3 V DC or ess (between output and +V) Residua votage:.5 V or ess (at ma sink current) Residua votage:.5 V or ess (at ma source current) <NPN output type> NPN non-contact input Signa condition High: +8 V to +V DC or Open ow: to + V DC (Source current.5 ma or ess) Input impedance: kω Emission frequency : 5 μs or ess (factory defaut ) Emission frequency : 5 μs or ess Emission frequency : 5 μs or ess Emission frequency 3: 6 μs or ess Seectabe either ight-on or Dark-ON, at SET mode Incorporated <PNP output type> PNP non-contact input Signa condition High: + V to +V DC (Sink current.5 to 3 ma) ow: to +.6 V DC or Open Input impedance: kω -eve teaching / imit teaching / Fu-auto teaching Orange ED (ights up when the output is ON) digits (green) + digits (red) CD dispay Incorporated Emission frequency :.5 ms or ess (factory defaut ) Emission frequency :.8 ms or ess Emission frequency 3: 3. ms or ess Emission frequency : 5. ms or ess ON-deay / OFF-deay timer, switchabe either effective or ineffective [Timer period: ms, 5 ms, ms, ms, ms, 5 ms, ms, 5 ms,, ms] Incorporated Emission frequency seection method (Note ) (Functions at emission frequency, or 3) Incorporated Switchabe either effective or ineffective Incorporated Emission frequency seection method (Note ) (Functions at emission frequency,, 3 or ) to +55 C + to +3 F (If to 7 units are mounted cose together: to +5 C + to + F, if 8 to 6 units are mounted cose together: to +5 C + to +3 F) (No dew condensation or icing aowed), Storage: to +7 C to +58 F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient iuminance Incandescent ight: 3, x at the ight-receiving face Votage withstandabiity, V AC for one min. between a suppy terminas connected together and encosure (Note 3) Insuation resistance MΩ, or more, with 5 V DC megger between a suppy terminas connected together and encosure (Note 3) Vibration resistance to 5 Hz frequency,.75 mm.3 in ampitude in X, Y and Z directions for two hours each Shock resistance 98 m/s acceeration ( G ) in X, Y and Z directions for fi ve times each Emitting eement (moduated) Red ED (Peak emission waveength: 63 nm.5 mi) Materia Encosure: Poycarbonate, Key switch: Poycarbonate, ock ever: PBT Connecting method Connector (Note ) Cabe ength Tota ength up to m 38.8 ft is possibe with.3 mm, or more, cabe. Weight Accessory Net weight: 5 g Gross weight: 35 g Net weight: 5 g Gross weight: 75 g CN-A-C (Connector attached cabe, m 6.56 ft ong): pc. Net weight: 5 g Gross weight: 35 g Net weight: 5 g Gross weight: 75 g CN-A-C (Connector attached cabe, m 6.56 ft ong): pc. Notes: ) Where measurement conditions have not been specifi ed precisey, the conditions used were an ambient temperature of +3 C +73. F. ) When using the interference prevention function, set the emission frequencies for the ampifi ers to be covered by the interference prevention function to different frequency vaues. However, the interference prevention function does not operate at emission frequency (factory defaut ) for the FX-(P)(-Z) / FX-(P)-CC. 3) The votage withstandabiity and the insuation resistance vaues given in the above tabe are for the ampifi er ony. ) Connector attached cabe CN-A-C is not attached to the modes that have no -CC at the end of the mode Nos. Make sure to use the optiona connector attached cabe CN-A(-R)-C or the connector CN-A, or a connector manufactured by J.S.T. Mfg., td. (contact: SPHD-T-P.5, housing: PAP-V-S). Mode Nos. having the suffi x -Z are M8 pug-in connector type. Make sure to use the optiona M8 attached connector cabe CN-A-C. CONTRO s Sensor Ampifiers FX-3 FX- FX-3-F

11 33 Digita Sensor SERIES I/O CIRCUIT AND WIRING DIAGRAMS FX- (-Z/-CC) NPN output type I/O circuit diagram * Sensor circuit +8 V D Tr ZD Interna circuit Termina No. Coor code of cabe with connector (Brown) +V oad (Back) Output ma max. (White) Extema input 3 * (Bue) V Users circuit Symbos D : Reverse suppy poarity protection diode ZD: Surge absorption zener diode Tr : NPN output Non-votage contact or NPN open-coector or + to V DC ± % Termina arrangement diagram Connector type 3 M8 pug-in connector type 3 Termina No. Function +V Output 3 Externa input V Termina No. Function +V Output 3 Externa input V CONTRO High (+8 V to +V DC, or open): Ineffective ow [( to + V DC (source current.5 ma or ess)]: Effective FX- P(-Z/-CC) PNP output type I/O circuit diagram Termina arrangement diagram Termina No. Connector type s Sensor sensor Ampiifiers Ampifiers FX-3 FX- FX-3-F circuit Sensor Tr D ZD Interna circuit Coor code of cabe with connector (Brown) +V (White) Externa input 3 ma max. (Back) Output oad (Bue) V Users circuit Symbos D : Reverse suppy poarity protection diode ZD: Surge absorption zener diode Tr : PNP output * Non-votage contact or PNP open-coector or * + to V DC ± % 3 M8 pug-in connector type 3 Termina No. Function +V Output 3 Externa input V Termina No. Function +V Output 3 Externa input V High [ + V to +V DC (sink current.5 to 3 ma)]: Effective ow ( to +.6 V DC, or open): Ineffective

12 Digita Sensor SERIES 3 SENSING CHARACTERISTICS (TYPICA) Contact our offi ce for sensing characteristics that are not contained here. Parae deviation Vertica direction Horizonta direction Parae deviation Parae deviation,, FT-A8 3, 8., 78.7, FX- Down Center Up Operating point (mm in) FD-B FX- FX- 8 mm.35 in eft Center Right Operating point (mm in) Ref ective type White non-gossy paper eft Center Right Operating point (mm in) 3, 8. Thru-beam type, 78.7 FX-, eft Center Right Operating point (mm in), FD-FM 5.78 FX eft Center Right Operating point (mm in) Ref ective type FX- White non-gossy paper eft Center Right Operating point (mm in) FT-B8, , FD-G Thru-beam type FX , eft Center Right Operating point (mm in) FX- Ref ective type White non-gossy paper eft Center Right Operating point (mm in) FT-FM FT-FMS FT-FMS FT-SFM FT-T8, Sensing fied Sensing fied Sensing fied Sensing fied FT-NFM FT-NFMS FT-NFMS FT-SNFM Thru-beam type FT-P8X Thru-beam type FT-W FT-WS FX- Thru-beam type eft Center Right Operating point (mm in) FD-G6X FX- Thru-beam type 5.78 eft Center Right Operating point (mm in) FT-W8 FT-WS8 Parae deviation Parae deviation Parae deviation Parae deviation FD-NFM FD-NFMS FD-NFMS FD-SNFM FD-T FX- Refective type White non-gossy paper eft Center Right Operating point (mm in) FD-P8X.575 Ref ective type FX- White non-gossy paper eft Center Right Operating point (mm in) FD-W8 FD-WS8 FD-WT8.575 FX- Refective type Sensing fied Sensing fied Sensing fied Sensing fied White non-gossy paper eft Center Right Operating point (mm in) FX- Thru-beam type eft Center Right Operating point (mm in) Ref ective type CONTRO s Sensor Ampifiers FX- White non-gossy paper FX FX eft Center Right Operating point (mm in) FX-3-F FD-WG FD-WSG Refective type FX- White non-gossy paper eft Center Right Operating point (mm in)

13 35 Digita Sensor SERIES PRECAUTIONS FOR PROPER Refer to p.986~ for genera precautions, and to the Operation or SUNX website ( for detais pertaining to operating instructions for the ampifier. CONTRO s Sensor sensor Ampiifiers Ampifiers FX-3 FX- FX-3-F Never use this product as a sensing device for personne protection. In case of using sensing devices for personne protection, use products which meet aws and standards, such as OSHA, ANSI or IEC etc., for personne protection appicabe in each region or country. Using in combination with the FX-3 / FX- series The series does not use the horizonta connectors that are used with the FX-3 / FX- series. Pease note that horizonta connection cannot be performed using a connector attached cabe. In addition, the optica communication function is not equipped on the series, so it is unabe to perform interference prevention for use with the FX-3 / FX- series. If using the series together with the FX-3 / FX- series side-by-side, pease set the same modes together in groups. Mounting <When using a DIN rai> How to mount the ampifier Fit the rear part of the mounting section of the ampifi er on a 35 mm.378 in width DIN rai. Press down the rear part of the mounting section of the unit on the 35 mm.378 in width DIN rai and fi t the front part of the mounting section to the DIN rai. How to remove the ampifier Push the ampifi er forward. ift up the front part of the ampifi er to remove it. 35 mm.378 in width DIN rai Note: Take care that if the front part is ifted without pushing the ampifi er forward, the hook on the rear portion of the mounting section is ikey to break. <When using screws with washers> Use M3 screws with washers for mounting. The tightening torque shoud be.5 N m or ess. Part description Operation indicator (Orange) Digita dispay (Green) (Threshod vaue) Setting mode Setting mode appears after the MODE key is pressed for sec. in RUN mode. Setting item Factory Teaching mode Output operation Timer operation Timer Emission amount Emission frequency [Dark-ON] [Without timer] [ON-deay timer: ms] [OFF-deay timer: ms] [OFF] FX- (Response time: 5 μs or ess) (Response time:.5 ms or ess) ON key / Setting vaue UP key MODE key Digita dispay (Red) (Incident ight intensity) OFF key / Setting vaue DOWN key Description Threshod vaue can be set in -eve teaching, imit teaching, or fu-auto teaching. ight-on or Dark-ON can be set. Without timer, ON deay timer, or OFF deay timer can be set. In case of ON-deay timer or OFF-deay timer in the timer operation mode, timer can be set. When timer is not set, this mode is not dispayed. Setting for reduced intensity of emission amount is possibe when the incident ight intensity is saturated. In case of using the fi ber s in parae, interference can be prevented by different emission frequency. However, when emission frequency is set, interference cannot be prevented. Response time corresponds to emission frequency. For detais, refer to SPECIFICATIONS on p.3. M3 screw with washer

14 Digita Sensor SERIES 36 PRECAUTIONS FOR PROPER Refer to p.986~ for genera precautions, and to the Operation or SUNX website ( for detais pertaining to operating instructions for the ampifier. PRO mode PRO mode appears after the MODE key is pressed for sec. in RUN mode. Setting item Factory Shift [Shift amount 5 %] Externa input Threshod vaue foow-up cyce (Note ) GETA function (Note, 3) ECO Digita dispay inversion Threshod vaue margin Setting copy [Emission hat] [OFF] [OFF] [OFF] [OFF] [OFF] [NO] Description Shift amount can be seected from to 8 % in the imit teaching. Seect % when it is desired to set the present incident ight intensity as a threshod vaue. Extema input can be seected from emission hat, imit +, imit -, AUTO, and ECO. When incident ight intensity exceeds threshod vaue, this mode can change the threshod vaue with each set cyce depending on variations of the incident ight intensity. The foow-up shift amount is same as the one set in the shift mode. However, the threshod vaue is not stored. Variations can be reduced by correcting the present incident ight intensity in each ampifi er to a target vaue. Target vaue to offset incident ight intensity can be seected from to, by unit each. For exampe, if the target vaue is set to, when the incident ight intensity is,5, the incident ight intensity becomes,. It is possibe to ight up / turn off the digita dispay. When ECO mode is ON, the dispay turns off in sec. in RUN mode. To ight up the dispay again, press any key for sec. or more. Digita dispay can be inverted. Margin for threshod vaue to the present incident ight intensity can be checked. When there is no margin, it is possibe to make the digita dispay bink. : Set to OFF : does not function. : Green binks. : Red binks. : Red and green bink. The s of the master side ampifi er can be copied to the save side ampifi er. For detais, refer to Setting copy function. Reset Returns to defaut s (factory s.) [NO] Notes: ) If the incident ight intensity becomes 3 or ess, the foow-up operation stops. In that condition, threshod vaue [digita dispay (green)] binks. This function can be used when thru-beam type or retroref ective type fi ber is appied to this product. If ref ective type fi ber is appied, the function cannot be used depending on use conditions. ) If MODE key is pressed in RUN mode when GETA function is used, the incident ight intensity before GETA function is dispayed on the red digita dispay for sec. 3) When GETA function is used in saturation of incident ight intensity (, or more,) is indicated on the red digita dispay. Correction vaue is up to,. Setting copy function This can copy the s of the master side ampifi er to the save side ampifi er. Be sure to use the copy function between the identica modes (Between FX- modes or modes). This function cannot be used between different modes. Ony one sensor can be connected on save side with a master side sensor for the copy function. Threshod vaue, output operation, timer operation, timer, ight-emitting amount, shift, ECO, digita dispay inversion, and threshod vaue margin can be copied. <Setting procedures> Set the copy mode of the master side ampifi er to Copy sending ON, and press the MODE key so that is shown on the digita dispay and the sensor is in copy ready state. For the method, refer to Operation guide. Turn off the master side ampifi er. 3 Connect the master side ampifi er with the save side ampifi er as shown beow. Master side ampifier Save side ampifier Coor code of cabe with connector (Brown) +V (Back) Input (White) Extema input (Bue) V (Brown) +V (Back) Input (White) Extema input (Bue) V Turn on the master side ampifi er and the save side ampifi er at the same time. (Note) 5 is shown on the green digita dispay of the master side ampifi er and -digit code is shown on the red digita dispay of it, then the copying starts. During copy communication, is shown on the green digita dispay of the save side ampifi er, and the ongoing copy communication indicator ( ) is dispayed on the red digita dispay. 6 When the copying is competed, is shown on the green digita dispay of the save side ampifi er, whie the -digit code (the same code as the master side ampifi er) is shown on the red digita dispay of it. 7 Turn off the power of the master side ampifi er and the save side ampifi er and disconnect the wire. * If copying the s to another ampifi er repeatedy, foow the steps 3 to 7. Note: Take care that if the power is not turned on at the same time, the contents may not be copied. <To cance the copy mode of the master side ampifier> Whie the save side ampifi er is disconnected, turn on the power of the master side ampifi er. Press the MODE key for sec. + to V DC ± % CONTRO s Sensor Ampifiers FX-3 FX- FX-3-F

15 37 Digita Sensor SERIES PRECAUTIONS FOR PROPER Refer to p.986~ for genera precautions, and to the Operation or SUNX website ( for detais pertaining to operating instructions for the ampifier. CONTRO s Sensor sensor Ampiifiers Ampifiers FX-3 FX- FX-3-F Quick function Settings for output operation, ight-emitting amount, timer, and emission frequency are possibe simpy by seecting a number. The quick function makes it possibe to set the content of the SET Mode (output operation, timer operation, amount of ight emitted, and frequency of ight emitted) simpy by seecting a number. Whie in the RUN Mode, pressing and hoding both the ON key ( ) and OFF key ( ) simutaneousy for seconds wi switch to the quick function. <Tabe of quick numbers> No. Output operation Emission amount Timer D-ON OFF non D-ON ON non D-ON OFF ofd ms D-ON ON ofd ms D-ON OFF ofd ms D-ON ON ofd ms D-ON OFF ond ms D-ON ON ond ms D-ON OFF ond ms D-ON ON ond ms -ON ON ond ms -ON OFF ond ms -ON ON ond ms -ON OFF ond ms -ON ON ofd ms -ON OFF ofd ms -ON ON ofd ms -ON OFF ofd ms -ON ON non -ON OFF non Code function Settings for output operation, timer, emission amount, emission frequency, ECO, externa input, and shift amount are possibe by seecting codes discretionary. The code function makes it possibe to set the output operation, timer operation, amount of ight emitted, frequency of ight emitted, ECO, externa input, and amount of shift by seecting a code of one s choice. Whie in the RUN Mode, pressing and hoding both the ON key ( ) and OFF key ( ) simutaneousy for seconds wi switch to the code function. <Code tabe> st digit nd digit 3rd digit th digit Code Emission Emission Output Timer amount Frequency ECO Extema Shift operation (Note5) input (Note5) FX- non E_oF 5 % ond ms imit [+] % OFF D-on ond ms 3 OFF imit [ ] 5 % s -on ofd ms 3 Auto % ofd ms Eco 5 % non E_oF 3 % ON ond ms 3 imit [+] 35 % ond ms 3 ON imit [ ] % ofd ms Auto 5 % ofd ms Eco 5 % Notes: ) When the present is out of the code range, is shown. When is seected, the set content of the digit is not changed. ) The factory is. Do not use during the initia transient time (.5 sec.) after the power suppy is switched on. EEPROM is adopted to this product. It is not possibe to conduct teaching thousand times or more, because of the EEPROM s ifetime.

16 Digita Sensor SERIES 38 DIMENSIONS (Unit: mm in) Refer to p.6~ for fi ber dimensions. The CAD data in the dimensions can be downoaded from the website: FX- Ampifi er FX-(P)-Z (P)-Z Ampifi er Operation indicator (Orange).6 Digita dispay (Green, Red) 9.35 ø7. mm ø.83 in spot facing,.57 deep ø6. mm ø. in spot facing, 3.8 deep ø3. ø ø3. ø.6 OFF key / Setting vaue DOWN key ON key / Setting vaue UP key MODE key Assemby dimensions with optiona protective cover (FC-FX-) ø3. ø ø3. ø Suitabe for 35 mm.378 in width DIN rai Suitabe for 35 mm.378 in width DIN rai 7. mm.83 in spot facing,.57 deep 6. mm. in spot facing, 3.8 deep 9.35 Operation indicator (Orange)..6 Digita dispay (Green, Red) ø ø MODE key OFF key / Setting vaue DOWN key ON key / Setting vaue UP key.39 ø6.5 ø Suitabe for 35 mm.378 in width DIN rai MS-DIN- Ampifer mounting bracket (Optiona) MS-DIN-E End pate (Optiona) M3 (Iength 8 mm.79 in) pan screws 3.8 M3 Square nut Suitabe for 35 mm.378 in width DIN rai CONTRO s Sensor Ampifiers FX-3 FX- FX-3-F Materia: PBT Materia: Poycarbonate CN-A-C CN-A-R-C 35 5 ( ) ( ) ength (.35) (.35) Mode No. ength ø3.7 ø.6 cabe CN-A-C is attached FX-(P)-CC / (P)-CC CN-A(-R)-C, CN-A(-R)-C, 78.7 CN-A(-R)-C3 3, 8. CN-A(-R)-C5 5, Connector attached cabe (Optiona)

Simple operation due to clear operation system

Simple operation due to clear operation system 57 Digita Sensor SERIES Reated Information Genera terms and conditions... F-7 Gossary of terms / Genera precautions... P.359~ / P.45 Sensor seection guide... P.3~ seection... P.5~ PHOTO PHOTO Conforming