MODEL: R3-WT4B. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) Remote I/O R3 Series
|
|
- Justin Wheeler
- 6 years ago
- Views:
Transcription
1 MODEL: R-WTB Remote I/O R Series AC POWER MODULE ( input circuits, camp-on current sensor type CLSB use). (.) (.) (.) mm (inch) MODEL: R-WTB[][][][] ORDERING INFORMATION Code number: R-WTB[][][][] Specify a code from beow for each [] through []. (e.g. R-WTBW/Q) Specify the specification for option code /Q (e.g. /C) NO. OF CHANNELS B: channes, Sensor type CLSB [] CONFIGURATION : -phase / -wire : Singe-phase / -wire : Singe-phase / -wire [] (unbaanced oad) : V AC / A : V AC / A : V AC / A : V AC / A A: V AC / A (singe-phase/-wire) B: V AC / A (singe-phase/-wire) [] COMMUNICATION MODE S: Singe W: Dua [] OPTIONS ban: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detai, refer to M-System's web site.) /C: Siicone coating /C: Poyurethane coating /C: Rubber coating RELATED PRODUCTS PC configurator software (mode: RCON) The RCON is used to set up the software setting of this modue. Downoabe at M-System's web site. Camp-on current sensor (mode: CLSB-) Camp-on current sensor (mode: CLSB-) Note: The camp-on current sensor, not incuded in the product pacage of the R modue, must be ordered separatey. Refer to the data sheet for the sensor for more information such as appicabe wire diameter. GENERAL SPECIFICATIONS Connection Interna bus: Via the Instaation Base (mode: R-BSx) : M. screw terminas (torque. N m) Interna power: Via the Instaation Base (mode: R-BSx) Screw termina: Nice-pated stee Isoation: Sensor core to sensor output or current input or interna bus or interna power to votage input Computation: Time division mutipication DIP switch settings: Measuring variabes Computation methods Count Reset (Disabe/Enabe) Others Refer to the instruction manua for detais. RUN indicator: Bi-coor (red/green) LED; Red when the bus A operates normay; Green when the bus B operates normay; Amber when both buses operate normay. ERR indicator: Bi-coor (red/green) LED; Red with the input abnormaity; Green in norma operating conditions. Power ON timer: Starts conversion in seconds after the power is turned on. Low-end cutout: Converted data forced to % for % or ess input. (Seectabe by using RCON) SPECIFICATIONS Frequency: or Hz Votage Operationa range: % of rating Overoad capacity: % of rating for sec., % continuous Current R-WTB SPECIFICATIONS ES- Rev. Page /
2 MODEL: R-WTB Range CLSB-: A AC CLSB-: A AC Operationa range: % of rating Active Power Range Choose VT ratio so that the caibration range cacuated by the foowing equation is within the usabe range in the next tabe. Caibration Range [W] = Measuring Wattage [W] [(VT Ratio) (Current Rating)] Singe-phase/-wire USABLE RANGE VT BURDEN (VA) V / A ±W V / A ±W./phase V / A ±W V / A ±W./phase Singe-phase/-wire USABLE RANGE VT BURDEN (VA) V / A ±W./phase V / A ±W -phase/-wire USABLE RANGE VT BURDEN (VA) V / A ±W V / A ±W./phase V / A ±W V / A ±W./phase INSTALLATION Operating temperature: - to + C ( to F) Operating humidity: to %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Instaation Base (mode: R-BSx) Weight: g (. b) PERFORMANCE Accuracy (at C ± C or. F ± F, Hz) Active power: ± % Active energy: ± % Magnetic fied (ext. origin) effect: ±. % ( A/m) Conversion rate: msec. Conversion data: bits / bits Data aocation:, or seectabe Current consumption: ma Response time: sec. ( % ± %) Insuation resistance: MΩ with V DC Dieectric strength: V minute (votage input to current input or interna bus or interna power) V minute (power input to FG; isoated on the power suppy modue) R-WTB SPECIFICATIONS ES- Rev. Page /
3 MODEL: R-WTB EXTERNAL VIEW FRONT VIEW SIDE VIEW ERR LED A B RUN LED SW ON SW ON SW ON Range (SW) or (SW) (SW) or (SW) TRANSMISSION DATA DESCRIPTIONS VARIABLE A active power bits active power bits incoming energy bits incoming energy bits VARIABLE B incoming energy bits incoming energy bits bits bits ADDRESS VARIABLE C bits n active power active power incoming energy incoming energy ch. ch. ch. ch., ower digits n + active power active power incoming energy incoming energy ch. ch. ch. ch., upper digits n + active power active power incoming energy incoming energy ch. ch. ch. ch., ower digits n + active power active power incoming energy incoming energy ch. ch. ch. ch., upper digits n + incoming energy incoming energy incoming energy ch. ch., ower digits ch. ch., ower digits n + incoming energy incoming energy incoming energy ch. ch., upper digits ch. ch., upper digits n + incoming energy incoming energy incoming energy ch. ch., ower digits ch. ch., ower digits n + incoming energy incoming energy incoming energy ch. ch., upper digits ch. ch., upper digits n + incoming energy ch. ch., ower digits ch., ower digits n + incoming energy ch. ch., upper digits ch., upper digits n + incoming energy ch. ch., ower digits ch., ower digits n + incoming energy ch. ch., upper digits ch., upper digits n + n + ch., ower digits n + ch., upper digits n + ch., ower digits ch., upper digits SW- / SW- setting OFF / OFF ON / OFF OFF / ON ON / ON RCON type ID WTB*** WTB*** WTB*** WTB*** Networ Modue Data,,,,,,, Aocation Mode* n = I/O address on the instaation base Factory setting = Wh per bit. Data address depends upon the data aocation mode as indicated beow: (n thr. n+) (n thr. n+) (n thr. n+) *. Fixed at for the R-NPx. R-WTB SPECIFICATIONS ES- Rev. Page /
4 MODEL: R-WTB I/O DATA DESCRIPTIONS -BIT DATA -bit binary data. Minus vaues are represented in s compements. -BIT DATA -bit binary data. Minus vaues are represented in s compements. upper digits ower digits EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch). (.) (.) POSITIONING GUIDE A B (.). (.) M. SCREW TERMINAL COVER R-WTB SPECIFICATIONS ES- Rev. Page /
5 MODEL: R-WTB SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM -PHASE/-WIRE VOLTAGE FUSE VT P P P A A A A RUN LED ERR LED DIP SW Contro Communication BUS CONNECTOR INTERNAL BUS A INTERNAL BUS B* INTERNAL POWER CIRCUIT S L A A A A CIRCUIT S L A A B B CIRCUIT S L B B B B CIRCUIT S L B B B B *For dua redundant communication. R-WTB SPECIFICATIONS ES- Rev. Page /
6 MODEL: R-WTB SINGLE-PHASE/-WIRE VOLTAGE FUSE VT V v P P A A A A RUN LED ERR LED DIP SW Contro Communication BUS CONNECTOR INTERNAL BUS A INTERNAL BUS B* INTERNAL POWER CIRCUIT A A A A CIRCUIT A A B B CIRCUIT B B B B CIRCUIT B B B B *For dua redundant communication. R-WTB SPECIFICATIONS ES- Rev. Page /
7 MODEL: R-WTB SINGLE-PHASE/-WIRE VOLTAGE N FUSE VT P P P A A A A RUN LED ERR LED DIP SW Contro Communication BUS CONNECTOR INTERNAL BUS A INTERNAL BUS B* INTERNAL POWER N CIRCUIT S L A A A A N CIRCUIT S L A A B B N CIRCUIT S L B B B B N CIRCUIT S L B B B B *For dua redundant communication. Specifications are subject to change without notice. R-WTB SPECIFICATIONS ES- Rev. Page /
MODEL: R3-WT4. Remote I/O R3 Series. [4] OPTIONS blank: none /Q: With options (specify the specification) AC POWER INPUT MODULE (4 input circuits)
MODE: R-WT Remote I/O R Series AC POWER MODUE ( input circuits). (.) (.) [] OPTIONS ban: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detai, refer to M-System's
More informationMODEL: M5CTC. [4] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz) DC Power R: 24 V DC MODEL: M5CTC [1][2][3] [4][5]
MODE: M5CTC Super-mini Termina Boc Signa Conditioners M5-UNIT CT TRANSMITTER (camp-on current sensor) Functions & Features Converts an aternating current into a standard process signa Easy-to-insta camp-on
More informationMODEL: M2CEC MODEL: M2CEC-[1][2][3]-[4][5]
Super-mini Signa Conditioners Mini-M Series AC CURRENT TRANSMITTER (camp-on current sensor) Functions & Features Converts an aternating current into a standard process signa Easy-to-insta camp-on type
More informationMODEL: LTWT. Power Transducer Series LT-UNIT
Power Transducer Series T-UNIT WATT TRANSDUCER Functions & Features Proides a DC output signa and a puse totaizer signa in proportion to AC actie power Conenient puse unit output (Wh 10 n ) Measuring bidirectiona
More informationMODEL: M5CTC SEN TRONIC AG
MODE: M5CTC Super-mini Termina Boc Signa Conditioners M5-UNIT CT TRANSMITTER (camp-on current sensor) Functions & Features Converts an aternating current into a standard process signa Easy-to-insta camp-on
More informationMODEL: LSMT4 [2] INPUT 1: 480 V / 1 A AC 2: 480 V / 5 A AC. Power Transducer Series
Power Transducer Series MUTI POWER TRASDUCER Functions & Features Measures simutaneousy severa variabes of a heavycurrent power system: current, votage, active, reactive and apparent power, active and
More informationCTC CT TRANSMITTER. (clamp-on current sensor) BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL MODEL CTC
INSTRUCTION MANUA CT TRANSMITTER (camp-on current sensor) MODE CTC CTC BEFORE USE... Than you for choosing M-System. Before use, chec the contents of the pacage you received as outined beow. If you have
More informationMODEL: R3-RS8A. Remote I/O R3 Series. RTD INPUT MODULE (high accuracy, 8 points, isolated) MODEL: R3-RS8A[1][2]
MODEL: R-RS Remote I/O R Series INPUT MODULE (high accuracy, points, isolated). (.0) 0 (.) 0 (.) mm (inch) MODEL: R-RS[][] ORDERING INFORMTI Code number: R-RS[][] Specify a code from below for each []
More informationMODEL: R9CWTU. Remote I/O R9 Series. EXTENSION UNIT 1: With connection
Remote I/O R9 Series MULTI POWER MOITORIG UIT (Clamp-on current sensor CLSE, CC-Link) Functions & Features Multi Power Monitoring Unit for CC-Link. By using clamp-on current sensors, there is no need of
More informationMODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
More informationNETWORK ANALYSER MPR-50 / MPR-52S / MPR-60S / MPR-63
ETWOR AAYSER MPR-50 / MPR-52S / MPR-60S / Modbus / Ethernet Gateway Genera MPR-50 : etwor Anayser. MPR-52S : etwor Anayser with THD measurement, R S-45 (MODBUS) and Aarm Contact. MPR-60S: etwor Anayser
More informationMODEL: RPPD. Plug-in Signal Conditioners M-UNIT. [2] INPUT 2 Must be the same code as the one chosen for Input 1.
MODE: RPPD Plug-in Signal Conditioners M-UNIT PUSE ISOATOR (built-in excitation; rotary encoder use) Functions & Features Galvanically isolating two pulse rate signals from a rotary encoder Various outputs
More informationGT3D Digital Timers. 100 to 240V AC (50/60Hz), 24V AC (50/60Hz)/24V DC
rs G3D Series G3D rs Key features of the G3D series incude: Precise time setting using digita thumbwhee switches Eapsed or time remaining LCD dispay 6 time ranges, 16 timing functions deays up to 99.9
More informationEM330 Installation and use instructions Three-phase energy analyzer for indirect connection (5A) with Modbus, pulse or M-Bus interface
EM330 Instaation and use instructions Three-phase energy anayzer for indirect connection (5A) with Modbus, puse or M-Bus interface Code 8021422 Genera warnings HAZARD: Live parts. Heart attack, burns and
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
More informationMODEL: DLS. Telemetering System
POW RUN SA SA RT RU MODEL: DLS Telemetering System TELEMETERING UNIT Functions & Features Interfacing remote I/O devices with a modem for a telemetering system Process I/O (.0) [] POWER INPUT AC Power
More informationMODEL: R1C-GH. Remote I/O R1X Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
Remote I/O R1X Series THERMOCOUPLE & DC INPUT MODULE (16 points; CC-Link Ver.1.1/Ver.2.) Functions & Features 16-point thermocouple or DC inputs CC-Link interface CC-Link Version 1.1 and 2. can be switched
More informationMODEL: WL40MW1F. Wireless I/O WL40F Series
Wireless I/O WL40F Series WIRELESS GATEWAY (Modbus-RTU Transparent 900MHz Band Wireless Device (child device)) FUTIONS & ATURES This unit Incorporates 900MHz band wireless module. Works as a gateway between
More informationElectro Meter. Special Features. Selector Switch Meter.
Version: S70/2014/01 Seector Switch ZT20-1S0000000000 ZT20-1FS0000000000 ZT20-2S0000000000 ZT20-2FS0000000000 The moving iron, pane meters, EQ 72/96 housed in mouded poycarbonate cases are suitabe for
More informationRED LION CONTROLS MODEL IFMA - DIN-RAIL FREQUENCY TO ANALOG CONVERTER
RED LION CONTROLS INTERNATIONAL HEADQUARTERS EUROPEAN HEADQUARTERS 20 Wiow Springs Circe, York, Pa. 17402, (717) 767-6511 FAX: (717) 764-0839 892 Pymouth Road, Sough, Berkshire SL1 4LP Web site- http://www.redion-contros.com
More informationMODEL: DAST-20. Telemetering System
MODEL: DAST-0 Telemetering System TELEMETERING SYSTEM Functions & Features Small-scale telemetering system Lightning arrester protecting telephone circuit standard Approved of Technical Requirements Compliance
More informationMODEL: JPR2. Plug-in Signal Conditioners M-UNIT
MODE: JPR Plug-in Signal Conditioners M-UNIT PUSE SCAER (field-programmable; built-in excitation) Functions & Features Converts pulse rate into convenient engineering unit for display on a totalizing counter
More informationRectangular-shaped Inductive Proximity Sensor. website
785 Rectanguar-shaped Inductive Proximity Sensor SERIES Reated Information Genera terms and conditions... F-3 Gossary of terms... P.157~ guide... P.781~ Genera precautions... P.1579~ PHOTO PHOTO IGHT FOW
More informationKW8M. Toward energy savings. Visualization. Makes us more ecological! Eco-POWER METER 1A/5A CT Input type
WM co-powr MTR A/A CT Input type Visuaization Toward energy savings Maes us more ecoogica! Direct input of secondary side A/A CT Direct input from secondary side A/A type domestic and overseas CTs. Dedicated
More informationMODEL: M2XPA3. [2] EXCITATION 2: 4 V DC / 20 ma 3: 8 V DC / 20 ma 4: 12 V DC / 20 ma Configurator software is used to change the excitation value.
Super-mini Signal Conditioners Mini-M Series FREQUENCY TRANSMITTER (PC programmable) Functions & Features Converts the output from a pulse-type transducer into a standard process signal PC programmable
More informationMODEL: W2TS. Mini-MW Series
Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization
More informationRectangular-shaped Inductive Proximity Sensor.
71 PHOTOEECTRIC PHOTOEECTRIC IGHT FOW PARTICUAR USE SIMPE MEASUREMENT STATIC CONTRO Rectanguar-shaped Inductive Proximity Sensor SERIES Reated Information Genera terms and conditions... F-17 Gossary of
More informationMODEL: M6SXU MODEL: M6SXU [1][2] [3][4]
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)
More informationMODEL: DA3. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT D/A CONVERTER (16-bit resolution) Functions & Features Converts parallel digital signal into a DC output BCD, binary, offset binary, two's complement, reflected binary
More informationRectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
87 PHOTO PHOTO IGHT FOW PARTICUAR Rectanguar-shaped Inductive Proximity Sensor SERIES Reated Information Genera terms and conditions... F-7 Gossary of terms... P.18~ Sensor seection guide... P.83~ Genera
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
More informationMODEL: 47LV. Digital Panel Meters 47 Series
Digital Panel Meters 7 Series DC INPUT DIGITAL PANEL METER ( ½ digit, LED display type) Functions & Features ½ digit DC input digital panel meter /8 DIN size Moving average function to suppress the display
More information[3] MOUNTING DIRECTION
Bargraph Indicators N Series BARGRAPH INDICATOR Functions & Features Displays two process variables in dual graphic bargraphs of LED segments Single and dual bargraphs IP front cover plate is easily replaced
More informationMODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
More informationMODEL: 48NDVD. Bargraph Indicators 48N Series
Bargraph Indicators 8N Series BARGRAP INDICATING AAR (with -digit digital meter; with -wire transmitter excitation) Displays a process variable in graphic bargraph of ED segments in proportion to a -wire
More informationMODEL: M2XU MODEL: M2XU [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
More informationMODEL: M1EXT. with Display M1E Series
2 Channel Super-mini Signal Conditioners with Display M1E Series THERMOCOUPLE TRANSMITTER (2 channels, PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized
More informationMODEL: M2VF MODEL: M2VF [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (high speed response) Functions & Features Converts DC input from a sensor into a standard process signal Isolation between input and output
More informationMODEL: M2EXT. Super-mini Signal Conditioners with Display Mini-M M2E Series
Super-mini Signal Conditioners with Display Mini-M ME Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized process signal
More informationNGRM700. Neutral Grounding Resistor Monitor
M700 eutra Grounding Resistor Monitor M700_D00292_02_D_XXE/07.2018 M700 eutra Grounding Resistor Monitor Product description The M700 is ony intended for use in high-resistance grounded systems. In these
More informationMODEL: MRP6D. POWER INPUT DC Power R: 24 V DC. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type; DeviceNet) Functions & Features Small-size control valve actuator Direct connection to DeviceNet capable PLC and other devices on the same
More informationPPD COMPONENT IDENTIFICATION BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL PULSE ISOLATOR MODEL. (built-in excitation)
INSTRUCTI MANUA PUSE ISOATOR (built-in excitation) MODE PPD BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below. If you have any
More informationMODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator 1/1 high resolution Easy adjustment: electronic limiter at the valve open & closed
More informationMODEL: JB2. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT ANALOG BACK STATION Functions & Features Enables manual loading providing hold/increase/ decrease signals to a device controlled by PID controller When the PID controller
More informationMODEL: MRP6. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator Electrical positioner incorporated 1/1000 high resolution Easy adjustment: electronic
More informationMODEL: AS4V. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT DC ALARM (dual or quad alarm trip; field-configurable) Functions & Features Provides relay outputs at preset DC input levels Quad or dual trip Setting and display in
More informationEnergy Measurement and Management MT MD Multifunction meters with load profile
Energy Measurement and Management MT851... MD851... Mutifunction meters with oad profie The MT851 / MD851 eectronic mutifunction eectricity meters are designed for metering of active energy in two directions,
More informationMODEL: 48NAV. Bargraph Indicators 48N Series. [3] MOUNTING DIRECTION V: Vertical H: Horizontal
Bargraph Indicators 8N Series BARGRAP INDICATING AAR Functions & Features Displays a process variable in graphic bargraph of ED segments Provides max. alarm contact outputs ulti-color indicator IP front
More informationPage Transducer Survey... 4 General description and technical data... 8 Transducers DU for AC voltage Transducers DI for AC current...
Transducers Contents Page Transducer Survey........................................... 4 Genera description and technica data.......................... 8 Transducers DU for AC votage...............................
More informationContrans E - SU. Configurable universal transducer for all power current variables and for mains synchronization 10/ EN
Contrans E - S Configurabe universa transducer for a power current variabes and for mains synchronization 0/8-.54 EN Configurabe transducer for a power current variabes, I, P, Q, S, cosϕ, sinϕ, ϕ, f 4
More informationElectronic circuit protector ESX10-Sxxx-DC24V-1A-10A
Eectronic circuit protector ESX10-Sxxx-DC2V-1A-10A Description The mode ESX10-Sxxx extends our product group of eectronic overcurrent protection devices for DC 2 V appications. At a width of ony 12.5mm
More informationMODEL: M6SXT. POWER INPUT DC Power R: 24 V DC
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection 5.9-mm wide ultra-slim design Low profile
More informationMODEL: 48NDV. Bargraph Indicators 48N Series
Bargraph Indicators 8N Series BARGRAP INDICATING AAR (with -digit digital meter) Functions & Features Displays a process variable in graphic bargraph of ED segments Clear -digit digital meter Provides
More informationMODEL: 20VS2-02. Hybrid IC Isolation Amplifiers 20 Series
MODEL: 0VS-0 Hybrid IC Isolation Amplifiers 0 Series ISOLATION AMPLIFIER (-port isolation) Functions & Features Being used for printed wiring board installation High-linearity Low power consumption Isolating
More informationENGLISH WM2 - DIN / EM2 - DIN OPERATING INSTRUCTIONS. General features 2. WM2-DIN Technical features 3. EM2-DIN Technical features 9.
ENGISH WM2 - DIN / EM2 - DIN OPERATING INSTRUCTIONS General features 2 WM2-DIN Technical features 3 EM2-DIN Technical features 9 Installation 11 Preliminary operations 12 Front panel description 12 Operating
More informationMODEL: M3LU. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC
Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step Cal calibration
More informationMODEL: 47LPA. [2] ALARM OUTPUT 0: None 1: N.O. relay contact, 4 points 2: SPDT relay contact, 2 points. Digital Panel Meters 47 Series
Digital Panel Meters 47 Series FREQUENCY INPUT DIGITAL PANEL METER (4½ digit, LED display type) Functions & Features 4 ½ digit digital panel meter 1/8 DIN size Accepts a pulse train input to measure rotation
More informationCruzPro VAH-65. Advanced 3 BankVolts, 1 Bank Amps/Amp-Hour Monitor/w Alarms & NMEA 0183
Other CruzPro Products Depthsounders, Fishfinder & Speed/Temperature/Log DC Vots/Amps/Amp-Hour Monitors AC Vots/Amps/Freq/kW Monitor LPG/Petro Gas Detectors/Aarms Bige Water Aarms & Bige Pump Controers
More informationFirefighter Switch with Arc Fault Detection PVSEC-...-AF1
Firefighter Switch with Arc Faut Detection PVSEC... Description The term firefighter switch indicates a remotey controabe DC Disconnect with which the DC side of a photovotaic system in proximity of the
More informationFirefighter Switch with Arc Fault Detection PVSEC-...-AF...
Firefighter Switch with Arc Faut Detection PVSEC... Description The term firefighter switch indicates a remotey controabe DC Disconnect with which the DC side of a photovotaic system in proximity of the
More informationCHANNEL LETTER LIGHTING
LIGHTING UNIQUE LIGHTING SOLUTIONS WARNING Instaation must ony be performed by a icensed eectrician. To prevent death, injury or damage to property this product must be instaed in accordance to Nationa
More informationMODEL: M2DYS SEN TRONIC AG
Super-mini Signal Conditioners Mini-M Series CURRENT LOOP SUPPLY Functions & Features Powers a 20 ma DC current loop Short circuit protection Applicable to smart transmitters CE marking UL approval Typical
More informationUnderstanding The HA2500 Horizontal Output Load Test
Understanding The HA2500 Horizonta Output Load Test Horizonta output stages are part of every CRT video dispay incuding cosed circuit monitors, computer monitors, video games, medica monitors, TVs. HDTVs,
More informationJRQ2 ENCODER POSITION TRANSMITTER MODEL. Plug-in Signal Conditioners M-UNIT. (field-programmable; built-in excitation)
Plug-in Signal Conditioners M-UNIT ENCODER POSITI TRANSMITTER (field-programmable; built-in excitation) MODEL JRQ MODEL & SUFFIX CODE SELECTI JRQ MODEL SELECTI Open collector Voltage pulse RS- line driver
More informationMODEL: W2DYS SEN TRONIC AG. Mini-MW Series
MODEL: WDYS Space-saving Dual Output Signal Conditioners Mini-MW Series CURRENT LOOP SUPPLY Functions & Features Powers a 0 ma DC current loop Short circuit protection Applicable to smart transmitters
More information2.1 General Specifications
Chapter 2. 2.1 General Specifications Table 2.1 shows general specifications of the GLOFA GM series and MASTER-K series. No Item Specifications Standards 1 2 3 4 Operating ambient temperature Storage ambient
More informationCommercially-available connectors are used so that lead time and spare part numbers can both be reduced Conventional lead time
3 PHOTO PHOTO Digita Sensor SERIES Reated Information Genera terms and conditions... P. Sensor seection guide...p.~ / P.6~ Gossary of terms / Genera precautions...p.983~ / P.986~ seection... P.63~ Conforming
More informationMODEL: M2SES SEN TRONIC AG [3] OUTPUT
Super-mini Signal Conditioners Mini-M Series HIGH/LOW SELECTOR Functions & Features Monitors two DC input signals and transmits an output signal proportional to the higher or lower input CE marking UL
More informationCruzPro FU60. Intelligent Digital Fuel Gauge/w Alarms & Consumption Calculator
Other CruzPro Products Depthsounders & Speed/Temperature/Logs PC Based Fishfinders and Active Depth Transducers DC Vots/Amps/Amp-Hour Monitor AC Vots/Amps/Freq/kW Monitor LPG/Petro Gas Detectors/Aarms
More informationLineup with new energy saving and environmentally friendly features!
ineup with new energy saving and environmentay friendy features! WM Eco-POWER METER WM Eco-POWER METER (DN 9 size) RoHS Directive compatibiity information http://www.mew.co.jp/ac/e/environment/ FEATURES
More informationJPQ2 PULSE ACCUMULATOR
INSTRUCTION MANUAL PULSE ACCUMULATOR (field-programmable; built-in excitation) MODEL JPQ JPQ BEFORE USE... Thank you for choosing M-System. Before use, check the contents of the package you received as
More informationMODEL: M3LU2. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC
MODEL: MLU Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step
More informationMODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With
Field-mounted Two-wire Signal Conditioners B6-UNIT 8: TIIS flameproof (CE not available) Confirm selectable combinations of approval and wiring conduit types in the table. 2-WIRE UNIVERSAL TEMPERATURE
More information0.5 Class Transducer for Power Application
ompact Size & Superior ost Performance Transducers. ass Transducer for ppication Mounting aaiabe for pane or DIN rai Screw mounting mm width (D-D Isoator, otage / urrent / Frequency) mm width ( / Reactie
More informationSeries 700A Power Processor
Series 700A Power Processor 5 25 SINGLE PHASE 10 500 THREE PHASE VOLTAGE REGULATION, ISOLATION, AND POWER DISTRIBUTION FOR CLEAN, SPIKE-FREE, STABLE VOLTAGE When Power Quaity Is A Must And Faiure Is Not
More informationHandheld Cable & Antenna Analyzer R&S ZVH Product Introduction Matthias Roski application engineer
Handhed Cabe & Antenna Anayzer R&S ZVH Product Introduction Matthias Roski appication engineer Handhed Cabe & Antenna Anayzer R&S ZVH Appication Area Antenna and Cabe Instaation of Transmitter Stations
More informationA2000 Multifunctional Power Meter
A2 3-348-98-3 16/2.8 Measurement of current, votage, active, reactive and apparent power, power factor, active and reactive energy, harmonic distortion and harmonics Precision measured vaues with error
More informationThermaData Logger DATA-LOGGERS. temperature recording thermometers.
ThermaData Logger temperature recording thermometers waterproof housing offering IP66/67 protection temperature range or 125 C resoution 0.1 C, high accuracy ±0.5 C meets EN 12830, S & T, C & D, 1 The
More information\[7 BROADS, ANTENI 2-6 Mt-
E.ECTRONCS TECHNCAN 3 & 2 VOL. 1 to each antenna couper (1) a.c. to operate the cooing fans which remove the heat generated during operation and (2) d.c. to operate the contro and protective circuits.
More informationAutomatic socket guard prevents incorrect connection of the measuring wires and protects both user and device.
Digita Mutimeter + Signa Generator UNIGOR 330, 355 Precision mutimeter (V, A, db, W, F, Hz, C/ F) Resoution 10µV-10nA-10mW-1pF-0,1 C-0,01Hz Quartz cock for rea-time recording Signa generator Standard caibration
More informationStatus Indicator LED PWR LINK COL
INSTRUCTION MANUAL DC VOLTAGE/CURRENT INPUT MODULE, 4 points (Ethernet Modbus/TCP) MODEL RE-SV4 RE-SV4 BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you
More informationSi3540 Programmable Step Motor Drive
44 Westridge Dr. Watsonville, CA 9576 831/761-6555 8/525-169 FAX 831/761-6544 Si354 Programmable Step Motor Drive 38 Si354 Programmable Step Motor Drive Features Si, Si Command anguage (SC) or SiNet Hub
More informationR9CWTU BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL MULTI POWER MONITORING UNIT MODEL. (clamp-on current sensor CC-Link)
INSTRUCTION MANUAL MULTI POWER MONITORING UNIT (clamp-on current sensor CC-Link) MODEL BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined
More informationNX5 SERIES. Compact Multi-voltage Photoelectric Sensor Power Supply Built-in. Multi-voltage photoelectric sensor usable worldwide.
7 Compact Muti-votage Photoeectric SERIES Reated Information Genera terms and conditions... F-17 Gossary of terms / Genera precautions...p.139~ / P.1 seection guide... P.23~ China s CCC mark... P.19 PHOTO
More informationDevice handbook APLUS-LED
Device handbook APLUS-LED Operating Instructions APLUS with LED dispay or without dispay 157 679-19 (PM 1000357 000 01) 04/2016 Camie Bauer Metrawatt AG Aargauerstrasse 7 CH-5610 Wohen / Switzerand Phone:
More informationISOSCAN EDS440/441. Device variants. Alarm messages are directly indicated on the device display
EDS/ Insuation faut ocators for ocaisation of insuation fauts in unearthed DC, AC and three-phase power suppy systems (IT systems) EDSxx_D D_XXEN/. EDS/ Insuation faut ocators for ocaisation of insuation
More informationMODEL: R7G4HML3. Remote I/O R7G4H Series MECHATROLINK I/O MODULE (MECHATROLINK-III)
MODEL: RGHML3 Remote I/O RGH Series MECHATROLINK I/O MODULE (MECHATROLINK-III) ( V open collector input) PAA: Encoder input (speed / position) point ( V open collector input) STYVS: Self-synch input, DC
More informationSURGE ARRESTERS FOR CABLE SHEATH PREVENTING POWER LOSSES IN M.V. NETWORKS
SURGE ARRESTERS FOR CABLE SHEATH PREVENTING POWER LOSSES IN M.V. NETWORKS A. Heiß Energie-AG (EAM), Kasse G. Bazer Darmstadt University of Technoogy O. Schmitt ABB Caor Emag Schatanagen, Mannheim B. Richter
More informationP1-04DAL-1 Analog Output
Output Specifications Output Channels Output Range ma Signal Resolution -bit Resolution Value of SB (least significant bit) Data Range 9 counts Output Type Output Value in Fault Mode ess than ma oad Impedance
More informationNPN TRANSISTOR OUTPUT MODULE
INSTRUCTION MANUAL NPN TRANSISTOR OUTPUT MODULE (3 points, MECHATROLINK- I/II use) MODEL BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as
More informationISOSCAN EDS440/441. Device variants. Alarm messages are directly indicated on the device display
EDS/ Insuation faut ocators for ocaisation of insuation fauts in unearthed DC, AC and three-phase power suppy systems (IT systems) EDS-_D D_XXEN/. EDS/ Insuation faut ocators for ocaisation of insuation
More informationSlim-line Aluminium Roofs Assembly Guide
Sim-ine Auminium Roofs Assemby Guide Contents Bonded fush gazed roofs Page 3 Singe section of gass Page 4 Singe square with opener Page 5 Mutipe gass panes Page 6 Instaing Openers Page 10 Timber Kerb For
More informationPDO 2035 Stepper Drive with Digital Oscillator
44 Westridge Dr. Watsonville, CA 9576 831/761-6555 8/525-169 FAX 831/761-6544 PDO 235 Stepper Drive with Digital Oscillator PDO 235 Packaged Pulse and Direction Step Motor Drive with Digital Oscillator
More informationSeries. Quite simply, the best in insulation! C.A 6521 C.A 6523 C.A 6525 C.A 6531 C.A Megohmmeters
Quite simpy, the best in insuation! Series C.A 6521 C.A 6523 C.A 6525 C.A 6531 C.A 6533 Megohmmeters Twin digita-anaogue dispay Giant back-it screen Battery powered for hours Programmabe threshod aarms
More informationPARM-SIZED, 16-CHANNEL RELAY TERMINALS
Pressure connector connect type Wire-direct connect type PARM-SIZED, -CHANNEL RELAY TERMINALS FEATURES Compact, space-saving design: The Relay Terminal with I/O channels measures only (W) (D) (H) mm (W).
More informationMODEL: TC10EM. Temperature Controller TC10 Series
Temperature Controller TC0 Series TEMPERTURE CONTROLLER (Modbus, 5 digit, LED display type, size 9 x 9 mm) Functions & Features Two PID controllers* Universal input x points, control output x points, discrete
More informationGeneral terms and conditions... F-7 Glossary of terms / General precautions... P.1455~ / P panasonic.net/id/pidsx/global
9 Digita Sensor FX- SERIES Reated Information Genera terms and conditions... F-7 Gossary of terms / Genera precautions... P.455~ / P.5 Sensor seection guide... P.3~ seection... P.5~ PHOTO PHOTO IGHT FOW
More informationAppendix A Rolling Average Algorithm
Appendix A Roing Average Agorith 98 ROLLING AVERAGE ALGORITHM Let be a ink between two reader fied sites with aributes th, the ink threshod for ink,, the current roing average trave tie for ink, and s,
More informationTechnical Document. for the. CB 016N6 Driver Card
Technical Document for the CB 06N6 Driver Card Contents Introduction 3 Page New functions 3 3 Dimensions 3 4 I/O Interface 4 5 Connectors 4-5 6 Switches 5-6 7 Potentiometers 7 8 LEDs and Error Indications
More informationDu line. Dupline car park system GP Direction indicator with red and green LED. Product Description Ordering Key GP
Dupline car park system Type GP 6565 00 with red and green LED Quick indication of free parking spaces Low power consumption Brightly lit indicator LED Built-in direction indicator to protect it against
More information