MODEL: 48NDVD. Bargraph Indicators 48N Series

Transcription

1 Bargraph Indicators 8N Series BARGRAP INDICATING AAR (with -digit digital meter; with -wire transmitter excitation) Displays a process variable in graphic bargraph of ED segments in proportion to a -wire transmitter output Clear -digit digital meter -wire transmitter excitation Usable with a smart transmitter Provides max. alarm contact outputs ulti-color indicator ED brightness adjustment IP front cover plate is easily replaced Separable terminal block (.) G: Green B: Blue : ulti-color (red, orange and green), Pattern (See External View. ) : ulti-color (red, orange and green), Pattern (See External View. ) INPUT Current ma DC (Input resistance Ω) [] POWER INPUT AC Power : 8 V AC (Operational voltage 8 V, / z (CE marking not available) : V AC (Operational voltage range 8 V, / z) DC Power R: V DC (Operational voltage range V ± %, ripple %p-p max.) (.7) m /h % SET S P ma (.) mm (inch) ODE: 8NDVD[][][][] [] OPTIONS (multiple selections) Standards & Approvals blank: Without CE /CE: CE marking Bezels blank: Bezels for -System s 8 Series panel cutout /D: Bezels for DIN panel cutout /F: Bezels for Fuji Electric's PAJ, PAK, PBA panel cutout Other Options blank: none /Q: Option other than the above (specify the specification) ORDERING INFORATION Code number: 8NDVD-[][]-[][] Specify a code from below for each [] through []. (e.g. 8NDVD--R/CE/D/Q) Bargraph scale (e.g. %) (See Plate. ) Digital indicator scale (e.g...) Specify the specification for option code /Q (e.g. /C/SET) [] AAR OUTPUT : None : points : points SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to -System's web site.) oving parts and indicators are not coated. /C: Silicone coating /C: Polyurethane coating /C: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-9) [] BAR ED COOR R: Red Y: Amber 8NDVD SPECIFICATIONS ES-99 Rev. Page /9

2 BEE OPTION Bezels are used to adapt the 8N Series to an existing panel cutout. In order to replace -System s 8 Series products, use the one attached to the 8N Series as standard. When the existing panel is cut according to DIN standard, specify /D suffix code. For a new installation, no bezel is required. Please refer to ounting Requirement and mount the 8N directly. Ingress protection is invalid when the 8N is mounted with a bezel, or when multiple modules are stacked side by side. SPARE PARTS plate GENERA SPECIFICATIONS Construction: Panel flush mounting Degree of protection: IP; applicable to the front panel for single unit mounted according to the specified panel cutout Connection: separable screw terminal (torque. N m) Screw terminal: Nickel-plated steel ousing material: Flame-resistant resin (black) Isolation: Input to output to power ero adjustment: - to % (front) Span adjustment: 9 to % (front) plate: Flame resistant resin (white scale & characters on black base) & alarm output delay: sec. (factory setting; fieldselectable between and sec. by sec. increments) Setpoint adjustment points: [ setpoint ] to % to [ setpoint] or No alarm trip points: [ setpoint] to % [ setpoint] to [ setpoint] [ setpoint] to [ setpoint] to [ setpoint] or No alarm trip Alarm deadband (hysteresis): % Setting: (Front button) ero and span adjustments Alarm setpoint Others (Refer to the instruction manual for details) Read rate: /s oving average sample number: (factory setting; field selectable among,,, 8 or ) ED brightness adjustment: 7 levels BARGRAP ED: -segment ED, mm (.9 ) long,. mm (. ) wide Display range: to (scaling function not available) ( % or % position bar blinks when over range) : Two different scales available for single bargraph Characters: ax. characters including decimal point and negative sign : in., max. Engineering unit: ax. characters DIGITA DISPAYS ED: 7-segment red ED, character 8 mm (. ) high Number of digits: digits Setting range: -999 to 9999 (in. significant digits) scale value: ( digits, the decimal point position disregarded) d range: The range between -999 to 9999 and - to % of input span (The indicator blinks when the input is out of the range) Decimal point position:,, or none ero indication: igher-digit zeros are suppressed Engineering unit: ax. characters on scale plate SUPPY OUTPUT (across the terminals ) Output voltage: 8 V DC with no load 8 V DC min. at ma Current rating: ma DC Shortcircuit Protection Current limited: ma max. Protected time duration: No limit INPUT SPECIFICATIONS DC Current: Input resistor incorporated 8NDVD SPECIFICATIONS ES-99 Rev. Page /9

3 OUTPUT SPECIFICATIONS Alarm Output: Relay contact Rated load: V A (cos ø = ) V A (resistive load) switching voltage: V AC, V DC switching power: 8 VA, W load: V ma echanical life: 8 cycles (rate 8 cycles/min.) Alarm Trip Operation Alarm Output Code Output Output Input (%) ()ON ()ON Terminal No. in parentheses (79)ON (78)ON Setpoint Setpoint Terminals 7 9, turn on at a loss of power. Alarm Output Code Output Output (79)ON (7)ON (78)ON PERFORANCE in percentage of span Accuracy Bargraph: ± % ± digit Digital indicator: ±. % ± digit Temp. coefficient: ±. % of FS/ C (±.8 % of FS/ F) Response time:. sec. (moving average sample number set to ) Insulation resistance: Ω with V DC Dielectric strength: V minute (input to output to power to ground) STANDARDS & APPROVAS EU conformity: EC Directive EI EN -- ES EN -- ow Voltage Directive EN - easurement Category II Pollution Degree Input to output to power: Reinforced insulation ( V) RoS Directive EN 8 Output ()ON Output ()ON ()ON Input (%) Terminals 7 9, turn on at a loss of power. INSTAATION Power Consumption AC: Approx.. VA at V with max. load Approx. 7 VA at V with max. load Approx. 8 VA at V with max. load DC Approx.. W at. V with max. load Approx.. W at V with max. load Approx.. W at 7. V with max. load Operating temperature: - to C ( to F) Operating humidity: to 9 %R (non-condensing) ounting: Panel flush mounting Weight: g (. lb) 8NDVD SPECIFICATIONS ES-99 Rev. Page /9

4 SCAE PATE WAT UST BE SPECIFIED WEN ORDERING Following two methods can specify scale plate. a) Using Plate Designer Access Design Plate in the -System web site (english). plate can be designed in this web site. By function below, it can be easy to create standard design or original design. [Design Automatically] Entering,, and Unit allows to create automatically a scale plate. created scale division number is.9. Use [Specify Division Number], if division number more than.9 is required ( division). [Specify Division Interval] Division Interval can be specified according to the application. [Specify Division Number] It is available to create originally with scale division number, length of line, position, character size, font and detailed position. After designing is completed, register code is issued. Place the order with this code. Once scale plate is designed, it is recorded. The register code can be used any number of times. b) Specifying scale range and display unit when placing the order It is available to create by specifying scale range and display unit for right and left. Regarding design of scale plate such as division number, length of division number line, and character font, they are same as above [Design Automatically], -System designs them. DESIGNING BY DESIGN AUTOATICAY ow Design Automatically creates scale design is described succinctly below. TYPES OF DIVISIONS Five () types of divisions are used depending upon the scale span, which determined by the following equation: n Span = (ax. range value in. range value) x where n = integer (used to limit the calculated scale span to the minimum of., below..) The number of divisions is automatically determined by the scale span. Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, ong ( divisions repeated) Type :. Span <. Number of divisions: to 9.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, edium, Short, ong ( divisions repeated) NDVD SPECIFICATIONS ES-99 Rev. Page /9

5 Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, edium, Short, edium, Short, edium, Short, ong ( divisions repeated) Type :. Span <. Number of divisions: 7. to.9 : Starts at, increments by. /. / / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, edium, edium, edium, edium, ong ( divisions repeated) Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, edium, edium, edium, edium, ong ( divisions repeated) [Example] : Bargraph range to cm (Type ) Digital indicator range. to.7 m (Type ) eft scale range: eft scale unit (bargraph): cm Right scale: None Digital indicator unit: m SET cm S P m 8NDVD SPECIFICATIONS ES-99 Rev. Page /9

6 EXTERNA VIEW AAR OUTPUT CODE : None Bar Color Patterns Pattern (Bar ED color code ) Setpoint Value Setpoint Value - SET S P SET (ENTER) Button Color Setpoint Adj. & Function Span Adj. & Setting Decimal Point Position, oving Average, Brightness Adj. ero Adj. & Setting Color Setpoint Adj. & Function Input < < Input < < Input red green green orange orange orange Pattern (Bar ED color code ) PV Indicator Setting UP Button, Switcing Detailed Settings ode & Setting Selector orange green green red red red - m /h % Setting DOWN Button, Switcing Detailed Settings Digital Indicator ma Note: Setpoint or provided only for the multi-color bar type. AAR OUTPUT CODE : points Setpoint SET 9 SET (ENTER) Button 8 Setpoint Adj. & Alarm Function Setpoint - 7 S P Span Adj. & Setting Decimal Point Position, oving Average, Brightness Adj. ero Adj. & Setting Setpoint Adj. & Alarm Function - Setting UP Button, Switcing Detailed Settings PV Indicator - - ode & Setting Selector - m /h % Setting DOWN Button, Switcing Detailed Settings Digital Indicator ma AAR OUTPUT CODE : points Setpoint SET 9 8 SET (ENTER) Button Setpoint Adj. & Alarm Function Setpoint Adj. & Alarm Function Setpoint Setpoint Setpoint - 7 S P Span Adj. & Setting Decimal Point Position, oving Average, Brightness Adj. ero Adj. & Setting Setpoint Adj. & Alarm Function Setpoint Adj. & Alarm Function - Setting UP Button, Switcing Detailed Settings PV Indicator - - ode & Setting Selector - m /h % Setting DOWN Button, Switcing Detailed Settings Digital Indicator ma 8NDVD SPECIFICATIONS ES-99 Rev. Page /9

7 DIENSIONS unit: mm (inch) * (.) SCREWS SCREW TERINAS (.7) (.9) (.) (.) (.9) 7 (.9) 8 (.) (.) (.7) STANDARD BEE* OPTION /D BEE* Rounded corners for the option /D OPTION /F BEE*.9 (.9). (.7) (.7).9 (.). (.7) (.7) 8. (.). (.7) (.7). (.) 7. (.). (.) 7. (.). (.) 7. (.) *. Space required when replacing the scale plate. *. Used for the existing panel cutout of -System 8 Series (8 9. mm). *. Used for the existing DIN panel cutout ( 8 mm) *. Used for the existing panel cutout of Fuji Electric PAJ, PAK, PBA ( 8 mm), etc. 8NDVD SPECIFICATIONS ES-99 Rev. Page 7/9

8 PANE CUTOUT unit: mm SINGE OUNTING (Conform to degree of protection IP). 8 Panel thickness:. 8. mm. min. CUSTERED OUNTING (Not conform to degree of protection IP) 8 Panel thickness:. 8. mm = {. (N )} (N : number of units) Note : Observe at the minimum of cm above and below the units for heat dissipation. Note : No bezel is needed when the panel is cut according to the above drawings. 8NDVD SPECIFICATIONS ES-99 Rev. Page 8/9

9 SCEATIC CIRCUITRY & CONNECTION DIAGRA AAR OUTPUT CODE : None AAR OUTPUT CODE : points ONITOR V DC V -WIRE XTR Ω ow Drift Amplifier Display / Setting Digital Computation Digital Computation 7 c 8 a 9 b a b OUTPUT OUTPUT c U () POWER V () U () V () POWER AAR OUTPUT CODE : points ONITOR V DC V -WIRE XTR Ω ow Drift Amplifier Display / Setting Digital Computation 7 c, c 8 a OUTPUT 9 b OUTPUT a a a b OUTPUT OUTPUT c, c U() V() POWER Relay Protection AC Powered OAD Inductive oad (Coil) Varistor or CR Circuit DC Powered OAD Inductive oad (Coil) Diode, Varistor or CR Circuit ma Input without Excitation INPUT Ω U Specifications are subject to change without notice. 8NDVD SPECIFICATIONS ES-99 Rev. Page 9/9