OMRON MK-I / -S RELAY

Transcription

1 Issued April 0 0 DATA SHEET OMRON MK-I / -S RELAY Based on OMRON Datasheet

2 General-purpose Relay MK-I/-S 0 Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical operations) assured by silver contacts. Built-in operation indicator (Mechanical, LED), push button, diode surge suppression, varistor surge suppression. Standard models are UL, CSA, SEV, DEMKO, NEMKO, SEM- KO, TÜV (IEC), and VDE. Conforming to CENELEC standards. Model Number Structure Model Number Legend Standard Models MK - -. Contact Form : DPDT : PDT. Cover P: Dust cover Special Accessories. Internal Connection Construction Blank: Standard or : Non-standard connection (Refer to Terminal Arrangement/ Internal Connections). Mechanical Indicator Push Button S: Mechanical indicator and push button I: Mechanical indicator. Approved Standards Blank: UL, CSA, DEMKO, NEMKO SEMKO, SEV, TÜV VD: VDE. Rated Voltage (Refer to Coil Ratings) MK Contact Form : DPDT : PDT. Cover P: Dust cover. Classification N: LED indicator D: Diode V: Varistor ND: LED indicator and diode NV: LED indicator and varistor. Coil Polarity Blank: Standard : Reverse (Refer to Terminal Arrangement/ Internal Connections). Internal Connection Construction Blank: Standard or : Non-standard connection (Refer to Terminal Arrangement/ Internal Connections). Mechanical Indicator Push Button S: Mechanical indicator and push button I: Mechanical indicator. Approved Standards Blank: UL and CSA only VD: VDE (N and D models only). Rated Voltage (Refer to Coil Ratings) Based on OMRON Datasheet Page of

3 Ordering Information 0 List of Models Type Terminal Contact form Internal connection (see note ) Accessories (Order Separately) With mechanical indicator With mechanical indicator and pushbutton Coil ratings Approved standards Standard Plug-in DPDT Standard MKP-I MKP-S AC (~), DC (=) UL, CSA, SEV, Non-standard MKP-I MKP-S DEMKO, NEM- KO, SEMKO, PDT Standard MKP-I MKP-S TÜV LED Indicator (see note ) Diode (see note ) Non-standard MKP-I MKP-I MKP-S MKP-S DPDT Standard MKPN@-I MKPN@-S AC (~), DC (=) UL, CSA Non-standard MKPN@--I MKPN@--S PDT Standard MKPN@-I MKPN@-S Non-standard MKPN@--I MKPN@--I MKPN@--S MKPN@--S DPDT Standard MKPD@-I MKPD@-S DC (=) UL, CSA Non-standard MKPD@--I MKPD@--S PDT Standard MKPD@-I MKPD@-S Non-standard MKPD@--I MKPD@--I MKPD@--S MKPD@--S Varistor DPDT Standard MKPV-I MKPV-S AC (~) UL, CSA Non-standard MKPV--I MKPV--S PDT Standard MKPV-I MKPV-S Non-standard MKPV--I MKPV--I MKPV--S MKPV--S VDE approved DPDT Standard MKP-I-VD MKP-S-VD AC (~), DC (=) UL, CSA, SEV, Non-standard MKP-I-VD MKP-S-VD DEMKO, NEM- KO, SEMKO, PDT Standard MKP-I-VD MKP-S-VD TÜV, Non-standard VDE LED Indicator VDE approved Diode VDE approved Track-mounted Socket Hold-down Clip Item -pin type -pin type MKP-I-VD MKP- I-VD MKP-S-VD MKP-S-VD DPDT Standard MKPN-I-VD MKPN-S-VD AC (~), DC (...) UL, CSA, VDE Non-standard MKPN--I-VD MKPN--S-VD PDT Standard MKPN-I-VD MKPN-S-VD Non-standard MKPN--I-VD MKPN--S-VD MKPN--I-VD MKPN--S-VD DPDT Standard MKPD-I-VD MKPD-S-VD DC (...) UL, CSA, VDE Non-standard MKPD--I-VD MKPD--S-VD PDT Standard MKPD-I-VD MKPD-S-VD Non-standard MKPD--I-VD MKPD--S-VD PF0A-E PFA-E PFC-A Model MKPD--I-VD MKPD--S-VD Note:. When ordering, add the rated to the model number. Rated s are given in the coil ratings table in Specifications. Example: MKP-S 0 VAC Rated. This DC coil comes in two types: standard coil polarity and reversed coil polarity. Refer to Terminal Arrangement/Internal Connections. Example: MKPN-I VDC Reverse polarity. Refer to Terminal Arrangement/Internal Connections for non-standard internal connection.. The gold plating thickness depends on the request. Example: MKP-I AP VAC Gold plating thickness: µm Based on OMRON Datasheet Page of

4 Specifications 0 Coil Ratings UL, CSA, DEMKO, NEMKO, SEMKO, SEV, TÜV AC (~) DC (=) Rated Rated current Coil resistance Must operate 0 Hz 0 Hz VDE AC (~) DC (=) V 0 ma 0 ma. Ω 0% max. of rated V ma 0 ma. Ω V.0 ma.0 ma.0 Ω 0 V.0 ma. ma 0 Ω 0 V. ma. ma,0 Ω V.0 ma. ma,0 Ω V.0 ma 0. ma,0 Ω 00 V. ma. ma,0 Ω 0 V.0 ma. ma, Ω 0 V. ma. ma, Ω 0 V. ma. ma,0 Ω Must release 0% min. of rated V ma. Ω % min. of rated V ma Ω V ma 0 Ω V. ma,0 Ω 0 V. ma,00 Ω V. ma,00 Ω Rated Rated current Coil resistance Must operate 0 Hz 0 Hz V 0 ma ma. Ω 0% max. of rated V ma ma.0 Ω V.0 ma. ma 0. Ω 0 V.0 ma.0 ma 0 Ω 0 V.0 ma 0. ma, Ω V. ma.0 ma,00 Ω V 0.0 ma.0 ma,00 Ω 00 V. ma. ma, Ω 0 V. ma. ma,00 Ω 0 V. ma. ma,0 Ω 0 V. ma. ma,00 Ω Must release 0% min. of rated V ma. Ω % min. of rated V ma Ω V.0 ma 0 Ω V.0 ma,0 Ω 0 V. ma,0 Ω V. ma,0 Ω Max. 0% to% of rated Max. 0% to% of rated Power consumption Approx.. VA (at 0 Hz) Approx.. VA (at 0 Hz) Approx.. W Power consumption Approx..0 VA (at 0 Hz) Approx.. VA (at 0 Hz) Approx.. W Note:. The rated current and coil resistance are measured at a coil temperature of C with tolerances of +%/ 0% for AC rated current and ±% for DC coil resistance.. Performance characteristic data are measured at a coil temperature of C.. ~ indicates AC and = indicates DC (IEC publications).. For 00 VDC applications, a 0-VDC Relay is supplied with a fixed. kω, 0 W resistor. Be sure to connect the resistor in series with the coil.. For models with the LED indicator built in, add an LED current of approximately 0 through ma to the rated current. Based on OMRON Datasheet Page of

5 Contact Ratings 0 Load Contact mechanism Contact material Rated load Rated carry current Max. switching Max. switching current Characteristics Note: The data shown are initial values. Resistive load (cosφ = ) Single Ag A at 0 VAC A at VDC A 0 VAC, 0 VDC A Inductive load (cosφ = 0.) A at 0 VAC Max. switching power,00 VA, 0 W,0 VA Contact resistance Operate time Release time Max. operating frequency Insulation resistance Dielectric strength Vibration resistance 0 mω max. AC: 0 ms max. DC: 0 ms max. 0 ms max. Mechanical:,000 operations/hr Electrical:,00 operations/hr (under rated load) 0 MΩ min. (at 00 VDC) Shock resistance Destruction:,000 m/s (approx. 0G) Malfunction:0 m/s (approx. G); Endurance Error rate (reference value) Ambient temperature,00 VAC, 0/0 Hz for min between coil and contacts;,000 VAC, 0/0 Hz for min between contacts of same polarity, terminals of the same polarity;,00 VAC, 0/0 Hz fro min between current-carrying parts, non-current-carrying parts, and terminals of opposite polarity Destruction: to to Hz, 0.-mm single amplitude (.-mm double amplitude) Malfunction: to to Hz, 0.-mm single amplitude (.0-mm double amplitude) Mechanical:,000,000 operations min. (at operating frequency of,000 operations/hour) Electrical:Refer to Engineering Data. ma at VDC Ambient humidity Operating: % to % Weight Operating: C to 0 C (with no icing or condensation) Approx. g Based on OMRON Datasheet Page of

6 Approved Standards The following ratings apply to all models. UL 0 (File No. E)/CSA. No.0/ (File No. LR) to VDC to 0 VAC SEV, DEMKO, NEMKO to V= to 0 V~ SEMKO to V= to 0 V~ Coil ratings Contact ratings Operations TÜV (VDE 0 Teil 0/0 0, IEC Teil -00/, EN 00/ (TÜV File No.: R0) VDE (VDE 0 Teil 0/0, IEC Teil -00/ ) (VDE File No.: NR 0) A, VDC (resistive) A, 0 VAC (resistive) A, 0 VAC (general use) 0,000 cycles Coil ratings Contact ratings Operations A, 0 V~ (NO) (cosφ = ) A, 0 V~ (NC) (cosφ = ) A, V= (NO) A, V= (NC) A, 0 V~ (cosφ = 0.) 0,000 cycles Coil ratings Contact ratings Operations A, 0 V~ (NO) (cosφ = ) A, 0 V~ (NC) (cosφ = ) 0,000 cycles Coil ratings Contact ratings Conditions Operations,,,, 0 V=,,, 0, 0,,, 00, 0 0, 0 V~ A, 0 V~ (cosφ = ) A, V= A, 0 V~ (cosφ = 0.) IEC --00 Item.. Pollution Degree, Over Category II Pick up class - class Temperature class - class b 0,000 cycles Coil ratings Contact ratings Conditions Operations,,,, 0 V=,,, 0, 0,,, 00, 0 0, 0 V~ A, 0 V~ (cosφ = ) A, V= A, 0 V~ (cosφ = 0.) C/0 - class, class C 0,000 cycles

7 Engineering Data Electrical Endurance Maximum Switching Power 0,000 0 Endurance (x operations),000, VAC inductive load -VDC resistive load 0-VAC resistive load -VAC resistive load Switching current (A) 0 DC resistive load VDC max. AC inductive load (cosϕ = 0.) AC resistive load Switching (V) Switching current (A)

8 Dimensions 0 Note: All units are in millimeters unless otherwise indicated. Relays. max. 0.. max.. max. Sockets See below for Socket dimensions. Socket Maximum carry current Surface-mounting Socket (for track or screw mounting) Finger-protection models A A poles PF0A-E PF0A poles PFA-E PFA --- Note: Use the Surface-mounting Sockets (i.e., finger-protection models) with -E at the end of the model number. When using the PF0A and PFA, be sure not to exceed the Socket s maximum carry current of A. Using at a current exceeding A may lead to burning. Round terminals cannot be used for finger-protection models. Use Y-shaped terminals. PF0A-E (Conforming to EN 00) Terminal Arrangement Mounting Holes Eight, M. x sems Two, M or two.-dia. holes max.. ±0. max.. max. PFA-E (Conforming to EN 00) Eleven, M. x sems Two, M or two.-dia. holes max.. ±0.. max.. max. Based on OMRON Datasheet Page of

9 Hold-down Clips PFC-A Mounting Tracks PFP-0N, PFP-0N (Conforming to EN 00) PFP-0N (Conforming to EN 00)..±0. ±0. ±0.. ±0.. * 00 (00)* 00±. * This dimension applies to the PFP-0N Mounting Track. * A total of twelve x. elliptic holes is provided with six holes cut from each track end at a pitch of mm. Mounting Height with Sockets Surface-mounting Sockets. (See note.) Two poles.. (See note.) Three poles. PF0A(-E) PFA(-E) Note: PF0A(-E) and PFA(-E) allow either track or screw mounting.

10 Terminal Arrangement/Internal Connection (Bottom View) Standard (AC/DC Coil) MKP-I, -S MKP-I, -S MKP-I, -S MKP-I, -S MKP-I, -S VDE-approved Type (AC/DC Coil) ( ): Dual Numbering MKP-I-VD, -S-VD MKP-I-VD, -S-VD MKP-I-VD, -S-VD MKP-I-VD, -S-VD MKP-I-VD, -S-VD () () () () () () () () () () () () () () () () () () () () () () () (A) (A) () () () () () () () () (A) (A) () () () () (A) (A) (A) (A) () () (A) (A) () () LED Indicator Type (AC Coil) MKPN-I, -S MKPN--I, -S MKPN-I, -S MKPN--I, -S MKPN--I, -S

11 0 LED Indicator Type Standard Polarity) MKPN-I, -S MKPN--I, -S MKPN-I, -S MKPN--I, -S MKPN--I, -S LED Indicator Type Reverse Polarity) MKPN-I, -S MKPN--I, -S MKPN-I, -S MKPN--I, -S MKPN--I, -S ( ) (+) Diode Type Standard Polarity) MKPD-I, -S MKPD--I, -S MKPD-I, -S MKPD--I, -S MKPD--I, -S (+) ( ) Diode Type Reverse Polarity) MKPD-I, -S MKPD--I, -S MKPD-I, -S MKPD--I, -S MKPD--I, -S Varistor Type (AC Coil) MKPV-I, -S MKPV--I, -S MKPV-I, -S MKPV--I, -S MKPV--I, -S Based on OMRON Datasheet Page of

12 LED Indicator and Diode Type (DC Coil) MKPND-I, -S MKPND--I, -S MKPND-I, -S MKPND--I, -S MKPND--I, -S LED Indicator and Varistor Type (AC Coil) MKPNV-I, -S MKPNV--I, -S MKPNV-I, -S MKPNV--I, -S MKPNV--I, -S VDE Approved Type LED Indicator Type Standard Polarity) ( ): Dual Numbering MKPN-I-VD, --VD MKPN--I-VD, --VD MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN--I-VD, -S-VD () () () () () () () () (A) (A) () () () () (A) (A) () () () (A) () () () () () (A) () () () () () () () () () () () () () () () () () (A) (A) (A) (A) () () VDE Approved Type LED Indicator Type Reverse Polarity) MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN--I-VD, -S-VD () () () () () () () () () () (A) (A) () (A) (A) () ( ) (+) () () () () () () () (A) (A) () () () () () () () () () () () (A) (A) () () () () () () () (A) (A) () () VDE Approved Type Diode Type Standard Polarity) MKPD-I-VD, -S-VD MKPD--I-VD, -S-VD MKPD-I-VD, -S-VD MKPD--I-VD, -S-VD MKPD--I-VD, -S-VDS () () () () () () () () () () () () () () () () () () () () () () () () () (A) () (A) () () () () () (A) (A) (A) () () (A) () () (A) (A) (A) (A) () () () ()

13 VDE Approved Type Diode Type Reverse Polarity) MKPD-I-VD, -S-VD MKPD--I-VD, -S-VD MKPD-I-VD, -S-VD MKPD--I-VD, -S-VD MKPD--I-VD, -S-VD () () () () (A) () () (A) () () () () () (A) (A) () () () () (A) () () () () () (A) () () () () () (A) () () () () () (A) () () () (A) () () () () () (A) () VDE Approved Type LED Indicator Type (AC Coil) MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN--I-VD, -S-VD () () () () () () () () (A) (A) () () () () (A) (A) () () () () () () () (A) (A) () () () () () () () () () () () (A) (A) () () () (A) () () () () () (A) () ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.0. To convert grams into ounces, multiply by 0.0. In the interest of product improvement, specifications are subject to change without notice.