MODEL: 48NDV. Bargraph Indicators 48N Series
|
|
- Ophelia Payne
- 5 years ago
- Views:
Transcription
1 Bargraph Indicators 8N Series BARGRAP INDICATING AAR (with -digit digital meter) Functions & Features Displays a process variable in graphic bargraph of ED segments Clear -digit digital meter Provides max. alarm contact outputs ulti-color indicator ED brightness adjustment IP front cover plate is easily replaced Separable terminal block (.7) (.) m /h % SET S P ma (.) mm (inch) ODE: 8NDV [][][] [][] ORDERING INFORATION Code number: 8NDV-[][][]-[][] Specify a code from below for each [] through []. (e.g. 8NDV-C-R/CE/D/Q) Special input range (For codes & ) Bargraph scale (e.g. %) (See Plate. ) Digital indicator scale (e.g...) Specify the specification for option code /Q (e.g. /C/SET) [] AAR OUTPUT : None : points : points [] BAR ED COOR R: Red Y: Amber G: Green B: Blue C: ulti-color (red, orange and green), Pattern (See External View. ) C: ulti-color (red, orange and green), Pattern (See External View. ) [] INPUT Current A: ma DC (Input resistance Ω) B: ma DC (Input resistance Ω) C: ma DC (Input resistance 9 Ω) D: ma DC (Input resistance Ω) E: ma DC (Input resistance Ω) F: ma DC (Input resistance Ω) G: ma DC (Input resistance Ω) : ma DC (Input resistance. Ω) : Specify current (See INPUT SPECIFICATIONS) Voltage : V DC (Input resistance Ω min.) : V DC (Input resistance Ω min.) : V DC (Input resistance Ω min.) : V DC (Input resistance Ω min.) W: - + V DC (Input resistance Ω min.) W: - + V DC (Input resistance Ω min.) : Specify voltage (See INPUT SPECIFICATIONS) [] POWER INPUT AC Power : 8 V AC (Operational voltage 8 V, / z (CE marking not available) : V AC (Operational voltage range 8 V, / z) DC Power R: V DC (Operational voltage range V ± %, ripple %p-p max.) [] OPTIONS (multiple selections) Standards & Approvals blank: Without CE /CE: CE marking Bezels blank: Bezels for -System s 8 Series panel cutout /D: Bezels for DIN panel cutout /F: Bezels for Fuji Electric's PAJ, PAK, PBA panel cutout Other Options blank: none /Q: Option other than the above (specify the specification) 8NDV SPECIFICATIONS ES-9 Rev.7 Page /9
2 SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to -System's web site.) oving parts and indicators are not coated. /C: Silicone coating /C: Polyurethane coating /C: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-9) BEE OPTION Bezels are used to adapt the 8N Series to an existing panel cutout. In order to replace -System s 8 Series products, use the one attached to the 8N Series as standard. When the existing panel is cut according to DIN standard, specify /D suffix code. For a new installation, no bezel is required. Please refer to ounting Requirement and mount the 8N directly. Ingress protection is invalid when the 8N is mounted with a bezel, or when multiple modules are stacked side by side. SPARE PARTS plate GENERA SPECIFICATIONS Construction: Panel flush mounting Degree of protection: IP; applicable to the front panel for single unit mounted according to the specified panel cutout Connection: separable screw terminal (torque. N m) Screw terminal: Nickel-plated steel ousing material: Flame-resistant resin (black) Isolation: Input to output to power ero adjustment: - to + % (front) Span adjustment: 9 to % (front) plate: Flame resistant resin (white scale & characters on black base) & alarm output delay: sec. (factory setting; fieldselectable between and sec. by sec. increments) Setpoint adjustment points: [ setpoint ] to % to [ setpoint] or No alarm trip points: [ setpoint] to % [ setpoint] to [ setpoint] [ setpoint] to [ setpoint] to [ setpoint] or No alarm trip Alarm deadband (hysteresis): % Setting: (Front button) ero and span adjustments Alarm setpoint Others (Refer to the instruction manual for details) Read rate: /s oving average sample number: (factory setting; field selectable among,,, 8 or ) ED brightness adjustment: 7 levels BARGRAP ED: -segment ED, mm (.9 ) long,. mm (. ) wide Display range: to (scaling function not available) ( % or % position bar blinks when over range) : Two different scales available for single bargraph Characters: ax. characters including decimal point and negative sign : in., max. Engineering unit: ax. characters DIGITA DISPAYS ED: 7-segment red ED, character 8 mm (. ) high Number of digits: digits Setting range: -999 to 9999 (in. significant digits) inimum scale value: ( digits, the decimal point position disregarded) d range: The range between -999 to 9999 and - to + % of input span (The indicator blinks when the input is out of the range) Decimal point position:,, or none ero indication: igher-digit zeros are suppressed Engineering unit: ax. characters on scale plate INPUT SPECIFICATIONS DC Current: ma DC; input resistor incorporated inimum span: ma When specifying a resistance value, choose from below.. Ω, Ω, Ω, Ω, 9 Ω, Ω DC Voltage: - + V DC Input resistance: Ω inimum span:. V Offset: ax.. times span 8NDV SPECIFICATIONS ES-9 Rev.7 Page /9
3 Approx.. W at V with max. load Approx.. W at 7. V with max. load Operating temperature: - to + C ( to F) Operating humidity: to 9 %R (non-condensing) ounting: Panel flush mounting Weight: g (. lb) OUTPUT SPECIFICATIONS Alarm Output: Relay contact Rated load: V A (cos ø = ) V A (resistive load) aximum switching voltage: V AC, V DC aximum switching power: 8 VA, W inimum load: V ma echanical life: 8 cycles (rate 8 cycles/min.) Alarm Trip Operation Alarm Output Code Output Output Input (%) ( )ON ( )ON Terminal No. in parentheses (7 9)ON (7 8)ON Setpoint Setpoint Terminals 7 9, turn on at a loss of power. Alarm Output Code Output Output (7 9)ON (7 )ON (7 8)ON PERFORANCE in percentage of span Accuracy Bargraph: ± % ± digit Digital indicator: ±. % ± digit Temp. coefficient: ±. % of FS/ C (±.8 % of FS/ F) Response time:. sec. (moving average sample number set to ) Insulation resistance: Ω with V DC Dielectric strength: V minute (input to output to power to ground) STANDARDS & APPROVAS EU conformity: EC Directive EI EN -- ES EN -- ow Voltage Directive EN - Installation Category II Pollution Degree Input to output to power: Reinforced insulation ( V) RoS Directive EN 8 Output ( )ON Output ( )ON ( )ON Input (%) Terminals 7 9, turn on at a loss of power. INSTAATION Power Consumption AC: Approx. VA at V with max. load Approx. VA at V with max. load Approx. VA at V with max. load DC Approx.. W at. V with max. load 8NDV SPECIFICATIONS ES-9 Rev.7 Page /9
4 SCAE PATE WAT UST BE SPECIFIED WEN ORDERING Following two methods can specify scale plate. a) Using Plate Designer Access Design Plate in the -System web site (english). plate can be designed in this web site. By function below, it can be easy to create standard design or original design. [Design Automatically] Entering inimum, aximum, and Unit allows to create automatically a scale plate. aximum created scale division number is.9. Use [Specify Division Number], if division number more than.9 is required (aximum division). [Specify Division Interval] Division Interval can be specified according to the application. [Specify Division Number] It is available to create originally with scale division number, length of line, position, character size, font and detailed position. After designing is completed, register code is issued. Place the order with this code. Once scale plate is designed, it is recorded. The register code can be used any number of times. b) Specifying scale range and display unit when placing the order It is available to create by specifying scale range and display unit for right and left. Regarding design of scale plate such as division number, length of division number line, and character font, they are same as above [Design Automatically], -System designs them. DESIGNING BY DESIGN AUTOATICAY ow Design Automatically creates scale design is described succinctly below. TYPES OF DIVISIONS Five () types of divisions are used depending upon the scale span, which determined by the following equation: n Span = (ax. range value in. range value) x where n = integer (used to limit the calculated scale span to the minimum of., below..) The number of divisions is automatically determined by the scale span. Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, ong ( divisions repeated) Type :. Span <. Number of divisions: to 9.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, edium, Short, ong ( divisions repeated) inimum aximum inimum aximum NDV SPECIFICATIONS ES-9 Rev.7 Page /9
5 Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, edium, Short, edium, Short, edium, Short, ong ( divisions repeated) Type :. Span <. Number of divisions: 7. to.9 : Starts at, increments by. /. / / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, edium, edium, edium, edium, ong ( divisions repeated) inimum aximum inimum aximum Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, edium, edium, edium, edium, ong ( divisions repeated) [Example] : Bargraph range to cm (Type ) Digital indicator range. to.7 m (Type ) eft scale range: eft scale unit (bargraph): cm Right scale: None Digital indicator unit: m inimum aximum SET cm S P m 8NDV SPECIFICATIONS ES-9 Rev.7 Page /9
6 EXTERNA VIEW AAR OUTPUT CODE : None Bar Color Patterns Pattern (Bar ED color code C) Setpoint Value Setpoint Value SET S P SET (ENTER) Button Color Setpoint Adj. & Function Span Adj. & Setting Decimal Point Position, oving Average, Brightness Adj. ero Adj. & Setting Color Setpoint Adj. & Function Input < < Input < < Input red green green orange orange orange Pattern (Bar ED color code C) - PV Indicator Setting UP Button, Switcing Detailed Settings ode & Setting Selector orange green green red red red - m /h % Setting DOWN Button, Switcing Detailed Settings Digital Indicator ma Note: Setpoint or provided only for the multi-color bar type. AAR OUTPUT CODE : points SET Setpoint 9 SET (ENTER) Button 8 Setpoint Adj. & Alarm Function Setpoint - 7 S P Span Adj. & Setting Decimal Point Position, oving Average, Brightness Adj. ero Adj. & Setting Setpoint Adj. & Alarm Function - Setting UP Button, Switcing Detailed Settings PV Indicator - - ode & Setting Selector - m /h % Setting DOWN Button, Switcing Detailed Settings Digital Indicator ma AAR OUTPUT CODE : points Setpoint SET 9 8 SET (ENTER) Button Setpoint Adj. & Alarm Function Setpoint Adj. & Alarm Function Setpoint Setpoint Setpoint - 7 S P Span Adj. & Setting Decimal Point Position, oving Average, Brightness Adj. ero Adj. & Setting Setpoint Adj. & Alarm Function Setpoint Adj. & Alarm Function - Setting UP Button, Switcing Detailed Settings PV Indicator - - ode & Setting Selector - m /h % Setting DOWN Button, Switcing Detailed Settings Digital Indicator ma 8NDV SPECIFICATIONS ES-9 Rev.7 Page /9
7 DIENSIONS unit: mm (inch) * (.) SCREWS SCREW TERINAS (.7) (.9) (.) (.) (.9) 7 (.9) 8 (.) (.) (.7) STANDARD BEE* OPTION /D BEE* Rounded corners for the option /D OPTION /F BEE*.9 (.9). (.7) (.7).9 (.). (.7) (.7) 8. (.). (.7) (.7). (.) 7. (.). (.) 7. (.). (.) 7. (.) *. Space required when replacing the scale plate. *. Used for the existing panel cutout of -System 8 Series (8 9. mm). *. Used for the existing DIN panel cutout ( 8 mm) *. Used for the existing panel cutout of Fuji Electric PAJ, PAK, PBA ( 8 mm), etc. 8NDV SPECIFICATIONS ES-9 Rev.7 Page 7/9
8 PANE CUTOUT unit: mm SINGE OUNTING (Conform to degree of protection IP) Panel thickness:. 8. mm. min. CUSTERED OUNTING (Not conform to degree of protection IP) 8 + Panel thickness:. 8. mm = {. + (N )} (N : number of units) + Note : Observe at the minimum of cm above and below the units for heat dissipation. Note : No bezel is needed when the panel is cut according to the above drawings. 8NDV SPECIFICATIONS ES-9 Rev.7 Page 8/9
9 SCEATIC CIRCUITRY & CONNECTION DIAGRA AAR OUTPUT CODE : None AAR OUTPUT CODE : points INPUT + * ow Drift Amplifier Display / Setting Digital Computation Digital Computation 7 c 8 a 9 b a b OUTPUT OUTPUT c U (+) POWER V ( ) U (+) V ( ) POWER *Input shunt resistor incorporated for current input. AAR OUTPUT CODE : points INPUT + * ow Drift Amplifier Display / Setting Digital Computation 7 c, c 8 a OUTPUT 9 b OUTPUT a a a b OUTPUT OUTPUT c, c U(+) V( ) POWER *Input shunt resistor incorporated for current input. Relay Protection AC Powered OAD Inductive oad (Coil) Varistor or Spark Quenching Circuit DC Powered OAD Inductive oad (Coil) Diode, Varistor or CR Circuit U Specifications are subject to change without notice. 8NDV SPECIFICATIONS ES-9 Rev.7 Page 9/9
MODEL: 48NDVD. Bargraph Indicators 48N Series
Bargraph Indicators 8N Series BARGRAP INDICATING AAR (with -digit digital meter; with -wire transmitter excitation) Displays a process variable in graphic bargraph of ED segments in proportion to a -wire
More informationMODEL: 48NAV. Bargraph Indicators 48N Series. [3] MOUNTING DIRECTION V: Vertical H: Horizontal
Bargraph Indicators 8N Series BARGRAP INDICATING AAR Functions & Features Displays a process variable in graphic bargraph of ED segments Provides max. alarm contact outputs ulti-color indicator IP front
More information[3] MOUNTING DIRECTION
Bargraph Indicators N Series BARGRAPH INDICATOR Functions & Features Displays two process variables in dual graphic bargraphs of LED segments Single and dual bargraphs IP front cover plate is easily replaced
More informationMODEL: AS4V. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT DC ALARM (dual or quad alarm trip; field-configurable) Functions & Features Provides relay outputs at preset DC input levels Quad or dual trip Setting and display in
More informationMODEL: 47LV. Digital Panel Meters 47 Series
Digital Panel Meters 7 Series DC INPUT DIGITAL PANEL METER ( ½ digit, LED display type) Functions & Features ½ digit DC input digital panel meter /8 DIN size Moving average function to suppress the display
More informationMODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
More informationMODEL: 47LPA. [2] ALARM OUTPUT 0: None 1: N.O. relay contact, 4 points 2: SPDT relay contact, 2 points. Digital Panel Meters 47 Series
Digital Panel Meters 47 Series FREQUENCY INPUT DIGITAL PANEL METER (4½ digit, LED display type) Functions & Features 4 ½ digit digital panel meter 1/8 DIN size Accepts a pulse train input to measure rotation
More informationMODEL: M2VF MODEL: M2VF [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (high speed response) Functions & Features Converts DC input from a sensor into a standard process signal Isolation between input and output
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
More informationMODEL: M2XPA3. [2] EXCITATION 2: 4 V DC / 20 ma 3: 8 V DC / 20 ma 4: 12 V DC / 20 ma Configurator software is used to change the excitation value.
Super-mini Signal Conditioners Mini-M Series FREQUENCY TRANSMITTER (PC programmable) Functions & Features Converts the output from a pulse-type transducer into a standard process signal PC programmable
More informationMODEL: W2TS. Mini-MW Series
Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization
More informationMODEL: M1EXT. with Display M1E Series
2 Channel Super-mini Signal Conditioners with Display M1E Series THERMOCOUPLE TRANSMITTER (2 channels, PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized
More informationMODEL: RPPD. Plug-in Signal Conditioners M-UNIT. [2] INPUT 2 Must be the same code as the one chosen for Input 1.
MODE: RPPD Plug-in Signal Conditioners M-UNIT PUSE ISOATOR (built-in excitation; rotary encoder use) Functions & Features Galvanically isolating two pulse rate signals from a rotary encoder Various outputs
More informationMODEL: DA3. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT D/A CONVERTER (16-bit resolution) Functions & Features Converts parallel digital signal into a DC output BCD, binary, offset binary, two's complement, reflected binary
More informationMODEL: M2XU MODEL: M2XU [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
More informationMODEL: M6SXT. POWER INPUT DC Power R: 24 V DC
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection 5.9-mm wide ultra-slim design Low profile
More informationMODEL: M2SES SEN TRONIC AG [3] OUTPUT
Super-mini Signal Conditioners Mini-M Series HIGH/LOW SELECTOR Functions & Features Monitors two DC input signals and transmits an output signal proportional to the higher or lower input CE marking UL
More informationMODEL: M2DYS SEN TRONIC AG
Super-mini Signal Conditioners Mini-M Series CURRENT LOOP SUPPLY Functions & Features Powers a 20 ma DC current loop Short circuit protection Applicable to smart transmitters CE marking UL approval Typical
More informationMODEL: JPR2. Plug-in Signal Conditioners M-UNIT
MODE: JPR Plug-in Signal Conditioners M-UNIT PUSE SCAER (field-programmable; built-in excitation) Functions & Features Converts pulse rate into convenient engineering unit for display on a totalizing counter
More informationMODEL: M2EXT. Super-mini Signal Conditioners with Display Mini-M M2E Series
Super-mini Signal Conditioners with Display Mini-M ME Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized process signal
More informationMODEL: W2DYS SEN TRONIC AG. Mini-MW Series
MODEL: WDYS Space-saving Dual Output Signal Conditioners Mini-MW Series CURRENT LOOP SUPPLY Functions & Features Powers a 0 ma DC current loop Short circuit protection Applicable to smart transmitters
More informationMODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator 1/1 high resolution Easy adjustment: electronic limiter at the valve open & closed
More informationMODEL: MRP6. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator Electrical positioner incorporated 1/1000 high resolution Easy adjustment: electronic
More informationMODEL: M6SXU MODEL: M6SXU [1][2] [3][4]
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)
More informationMODEL: JB2. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT ANALOG BACK STATION Functions & Features Enables manual loading providing hold/increase/ decrease signals to a device controlled by PID controller When the PID controller
More informationJRQ2 ENCODER POSITION TRANSMITTER MODEL. Plug-in Signal Conditioners M-UNIT. (field-programmable; built-in excitation)
Plug-in Signal Conditioners M-UNIT ENCODER POSITI TRANSMITTER (field-programmable; built-in excitation) MODEL JRQ MODEL & SUFFIX CODE SELECTI JRQ MODEL SELECTI Open collector Voltage pulse RS- line driver
More informationMODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
More informationMODEL: R3-RS8A. Remote I/O R3 Series. RTD INPUT MODULE (high accuracy, 8 points, isolated) MODEL: R3-RS8A[1][2]
MODEL: R-RS Remote I/O R Series INPUT MODULE (high accuracy, points, isolated). (.0) 0 (.) 0 (.) mm (inch) MODEL: R-RS[][] ORDERING INFORMTI Code number: R-RS[][] Specify a code from below for each []
More informationMODEL: M5CTC. [4] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz) DC Power R: 24 V DC MODEL: M5CTC [1][2][3] [4][5]
MODE: M5CTC Super-mini Termina Boc Signa Conditioners M5-UNIT CT TRANSMITTER (camp-on current sensor) Functions & Features Converts an aternating current into a standard process signa Easy-to-insta camp-on
More informationMODEL: LSMT4 [2] INPUT 1: 480 V / 1 A AC 2: 480 V / 5 A AC. Power Transducer Series
Power Transducer Series MUTI POWER TRASDUCER Functions & Features Measures simutaneousy severa variabes of a heavycurrent power system: current, votage, active, reactive and apparent power, active and
More informationMODEL: M3LU. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC
Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step Cal calibration
More informationMODEL: R1C-GH. Remote I/O R1X Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
Remote I/O R1X Series THERMOCOUPLE & DC INPUT MODULE (16 points; CC-Link Ver.1.1/Ver.2.) Functions & Features 16-point thermocouple or DC inputs CC-Link interface CC-Link Version 1.1 and 2. can be switched
More informationMODEL: M3LU2. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC
MODEL: MLU Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16 & SHIMADEN DIGITAL INDICATORS & NRTL /C approved BASIC FEATURES DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large 2 mm bright
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large
More informationMODEL: M2CEC MODEL: M2CEC-[1][2][3]-[4][5]
Super-mini Signa Conditioners Mini-M Series AC CURRENT TRANSMITTER (camp-on current sensor) Functions & Features Converts an aternating current into a standard process signa Easy-to-insta camp-on type
More informationMODEL: 20VS2-02. Hybrid IC Isolation Amplifiers 20 Series
MODEL: 0VS-0 Hybrid IC Isolation Amplifiers 0 Series ISOLATION AMPLIFIER (-port isolation) Functions & Features Being used for printed wiring board installation High-linearity Low power consumption Isolating
More informationMODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With
Field-mounted Two-wire Signal Conditioners B6-UNIT 8: TIIS flameproof (CE not available) Confirm selectable combinations of approval and wiring conduit types in the table. 2-WIRE UNIVERSAL TEMPERATURE
More informationMODEL: 47DV. Digital Panel Meters 47 Series
MODE: 47DV anel Meters 47 Series DC UT DIGITA ANE METER (5½ digit, CD display type) Functions & Features 5 1/2 digit DC input digital panel meter Scaling range -20000 to 100000 1/8 D size Display color
More informationMODEL: LTWT. Power Transducer Series LT-UNIT
Power Transducer Series T-UNIT WATT TRANSDUCER Functions & Features Proides a DC output signa and a puse totaizer signa in proportion to AC actie power Conenient puse unit output (Wh 10 n ) Measuring bidirectiona
More informationMODEL: MRP6D. POWER INPUT DC Power R: 24 V DC. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type; DeviceNet) Functions & Features Small-size control valve actuator Direct connection to DeviceNet capable PLC and other devices on the same
More informationAdjustable Digital Process Instrument MDK480
Description The adjustable Digital Process Instrument MDK480 is designed to measure and display process variables in industrial applications.the instrument is panel mounted with front frame dimensions
More informationDigital indicator for panel mounting With multi-function input Model DI25
Accessories Digital indicator for panel mounting With multi-function input Model DI25 WIKA data sheet AC 80.02 Applications Plant construction Machine tools Plastics technology and processing Ventilation
More informationMODEL: TC10EM. Temperature Controller TC10 Series
Temperature Controller TC0 Series TEMPERTURE CONTROLLER (Modbus, 5 digit, LED display type, size 9 x 9 mm) Functions & Features Two PID controllers* Universal input x points, control output x points, discrete
More informationBASIC FEATURES C %RH. Shimaden, Temperature and Humidity Control Specialists. CP3701: Thermocouple Temperature Converter
Shimaden, Temperature and Humidity Control Specialists C %RH CP3701: Thermocouple Temperature Converter CP3702: R.T.D. Temperature Converter CP3703: mv DC-DC Converter CP3704: V/mA DC-DC-Converter CP3705:
More informationMODEL: 47DR. [2] EXCITATION SUPPLY 1: +12 V sensor excitation 2: +24 V two-wire transmitter excitation. Digital Panel Meters 47 Series
anel Meters 47 Series RTD UT DIGITA ANE METER (5 digit, CD display type) Functions & Features 5 digit RTD input digital panel meter 1/8 D size Display color can be changed at alarm Bargraph indicator shows
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationMODEL: 47DT. Digital Panel Meters 47 Series
anel Meters 47 Series TERMOCOUE UT DIGITA ANE METER (5 digit, CD display type) Functions & Features 5 digit thermocouple input digital panel meter 1/8 D size Display color can be changed at alarm Bargraph
More informationMODEL: R9CWTU. Remote I/O R9 Series. EXTENSION UNIT 1: With connection
Remote I/O R9 Series MULTI POWER MOITORIG UIT (Clamp-on current sensor CLSE, CC-Link) Functions & Features Multi Power Monitoring Unit for CC-Link. By using clamp-on current sensors, there is no need of
More informationDIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
More informationGeneral Specifications
General Specifications GS 77J01Q08-01E Model VJQ8 Pulse to Analog Converter (Multi-function) (Isolated Single-output and Isolated Dual-output Types) General This plug-in type pulse to analog converter
More informationMODEL: B3HU. Space-saving Two-wire Signal Conditioners B3-UNIT
Space-saving Two-wire Signal Conditioners B3-UNIT 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER (HART communication, intrinsically safe) Functions & Features Universal input: mv, V, T/C, RTD, resistance, potentiometer
More informationGeneral Specifications
General Specifications Model UT, UT Temperature Controller GS CE-E GENERAL UT series temperature controllers provide only the functions and size you require for your application. /6 DIN sizes is available.
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
43 PHOTO PHOTO Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-3 guide... P.49~ Related Information Glossary of terms... P.549~ General precautions... P.55~ Recognition Make sure
More informationMODEL: DAST-20. Telemetering System
MODEL: DAST-0 Telemetering System TELEMETERING SYSTEM Functions & Features Small-scale telemetering system Lightning arrester protecting telephone circuit standard Approved of Technical Requirements Compliance
More informationMODEL: R3-WT4. Remote I/O R3 Series. [4] OPTIONS blank: none /Q: With options (specify the specification) AC POWER INPUT MODULE (4 input circuits)
MODE: R-WT Remote I/O R Series AC POWER MODUE ( input circuits). (.) (.) [] OPTIONS ban: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detai, refer to M-System's
More informationModel Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models
Solid-state Power OFF-delay Timer H3DE-H Timers Two delay-time models available. 0.1 to 12 seconds (S Series) 1 to 120 seconds (L Series) Covers wide range of supply voltage. Model Number Structure Model
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
473 PHOTO PHOTO Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.4~ Related Information Glossary of terms... P.455~ General precautions... P.458~ Conforming
More informationMODEL: 27HU 27-UNIT MODEL: 27HU [1][2]
Head-mounted Two-wire Signal Conditioners 7-UNIT -WIRE UNIVERSL TEMPERTURE TRNSMITTER (HRT communication) Functions & Features Universal input: DC mv, T/C, RTD and resistance High accuracy HRT communication
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
487 Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.475~ Related Information Glossary of terms... P.359~ General precautions... P.45 PHOTO PHOTO Conforming
More informationSHIMADEN DIGITAL INDICATOR
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD24 & KR16A SHIMADEN DIGITAL INDICATOR BASIC FEATURES ohigh Accuracy ±0.1% FS+1 digit o1/1000ºc Resolution Indication Possible (Pt input
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationPPD COMPONENT IDENTIFICATION BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL PULSE ISOLATOR MODEL. (built-in excitation)
INSTRUCTI MANUA PUSE ISOATOR (built-in excitation) MODE PPD BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below. If you have any
More informationSeries 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
More informationCM1-VA ECNOMIC VOLT/CURRENT Meter
SM-321S CM1-VA ECNOMIC VOLT/CURRENT Meter DESCRIPTION CM1 series Indicator has been designed in simple function and 4 digital 20.0mm LED displays with economic cost. They are can be programmed by tack
More informationSIA, SIB, SIC, SID. User's Manual
No. CP-UM-E SIA, SIB, SIC, SID Smart Indicator with LED Bar Graph User's Manual Thank you for purchasing the SIA, SIB, SIC and SID. This manual contains information for ensuring the correct use of the
More informationDigital Temperature Controller
www.hynux.com Digital Temperature Controller Economical price Convenient functions High speed sampling High accuracy temperature controlling AX2 AX3 AX4 AX7 AX9 Actualized the highly accurate temperature
More informationRCMS460 and RCMS490 Series
4 T M RCMS460 and RCMS490 Series Digital Multi-Channel Ground Fault Monitor / Ground Fault Relay Grounded and High-Resistance Grounded AC/DC Systems Technical Bulletin NAE1042060 / 04.2013 BENDER Inc.
More informationSafety relays - PSR-SCP- 24DC/ESD/4X1/
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationGeneral Specifications
General Specifications EJA530E S-Series Cherry Burrell I Line Sanitary Pressure Transmitter GS 530SCBS-01E The EJA530E S-Series sanitary pressure transmitters combine Yokogawa s EJA-E series in-line pressure
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationSHIMADEN PROGRAM CONTROLLER
Shimaden, Temperature and Humidity Control Specialists C %RH SHIMADEN PROGRAM CONTROLLER approved BASIC FEATURES Full multi-input and multi-range performance User selectable Thermocouple, RTD, V, mv and
More informationHawk 3 Digital Panel Meter / Controller
File # E199939 All parameters set from easy to understand front panel access One, two or four 5-amp relays optional Five user-selectable brightness levels 1/8 DIN, shallow depth case, 3.24 RS485 digital
More informationDigital Indicator DS 96/24
Data Sheet 10/33-2.11-EN Digital Indicator DS 96/24 This indicator is suitable for measuring direct voltage or direct current. By using potentiometers, the digital display can be assigned to any input
More informationElectronic Air / Fuel Ratio Control System
7 871 ISO 9001 Electronic Air / Fuel Ratio Control System RVW20... Electronic control unit - for use with modulating single- and dual-fuel burners - with extended functionality for mechanical air / fuel
More informationSolid-state Twin Timer
Solid-state Twin Timer -F Operates in flicker- or flicker- start mode with one Unit. Independent - and -time settings. Combinations of long - or -time and short - or -time setting are possible. Long time
More informationModel Number Structure
General-purpose Relay MK-I/-S Electromechanical Relays Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long
More informationOMRON MK-I / -S RELAY
Issued April 0 0 DATA SHEET OMRON MK-I / -S RELAY Based on OMRON Datasheet General-purpose Relay MK-I/-S 0 Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks
More information2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
More informationIndicomp 2, Indicomp 2-Ex. Indicator and alarm signalling unit 10/ EN
Indicator and alarm signalling unit 10/30-2.10 EN Dimensions 36 mm x 144 mm Can either stand vertically or lie horizontally Comprehensively explosion-protected Robust moving-coil system Contactless alarm
More informationPID CONTROLLERS LT SERIES
PID CONTROLLERS LT SERIES The Axis family of microprocessor based controllerscombine a high degree of functionality and reliability at a very low price, in 4 different formats : 1/16 DIN, 1/8 DIN, 1/ 4
More informationGeneral-purpose Relay
General-purpose Relay Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical
More informationGeneral Specifications
General Specifications MODEL UT50L Limit Controller GS 5DD-0E Overview The UT50L is an FM approved limit controller that can be configured either as a high limit or as a low limit controller by a user.
More informationJPQ2 PULSE ACCUMULATOR
INSTRUCTION MANUAL PULSE ACCUMULATOR (field-programmable; built-in excitation) MODEL JPQ JPQ BEFORE USE... Thank you for choosing M-System. Before use, check the contents of the package you received as
More informationDigital Panel Meter K3TE. Model Number Structure. Model Number Legend. Easy-to-use, Low-cost Digital Panel Meter that Accepts DC Input K3TE
Digital Panel Meter K3TE Easy-to-use, Low-cost Digital Panel Meter that Accepts DC Input Compact DIN-size (96 x 48 (W x H)) body. Mounting thickness of only 3.5 mm required. Highly visible display with
More informationRelays & Sockets. RF2V 2-Pole Force Guided Relays/SJ Series Relay Sockets. UL/Recogntion File No. E55996 TÜV SÜD. EU Low Voltage Directive
RFV RFV -Pole Force Guided Relays/SJ Series Relay Sockets Key features: -pole force guided relay to reduce cost and installation space. Force guided contact mechanism (EN00 Type A TÜV approved). Reinforced
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories Highquality digital indicator for panel mounting Model DI35M, with multifunction input Model DI35D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationMODEL: WL40MW1F. Wireless I/O WL40F Series
Wireless I/O WL40F Series WIRELESS GATEWAY (Modbus-RTU Transparent 900MHz Band Wireless Device (child device)) FUTIONS & ATURES This unit Incorporates 900MHz band wireless module. Works as a gateway between
More informationEnclosure rating. LED indicator with test button G2R-1-SNI G2R-2-SNI Unsealed Diode. LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI
General-purpose Relay CSM_GR-_-S_DS_E Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
More informationMODEL: VOS-ER. [4] LEVER POSITION 1: Upper side 2: Lower side. Position Sensors
Position Sensors 2-WIRE POSITION TRANSMITTER (flameproof, rotary motion type) Functions & Features Differential transformer incorporated Light weight and compact design High resolution Zero & Span adjustable
More information+GF+ SIGNET Temperature Transmitter Instructions
GF SIGNET 80- Temperature Transmitter Instructions ENGLISH -80.090- B-/00 English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal
More informationEasy-to-read in either English, French, or German; 20-digit, 2-line display; 6-channel simultaneous display possible
PHA & PHC STRIP CHART RECORDERS WITH BRILLIANT SIX-COLOR PRINTING Why use dot-matrix or fiber-tip pen printing when Fuji Electric s patented, cutting-edge recording technology offers an affordable inkjet
More informationAPPENDIX APPENDIX A 1
A 1 SPECIFICATIONS Ratings Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC, 50/60 Hz/24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 7VA 4VA/2.5W Sensor input Thermocouple
More informationDigital Indicator DS 96/48 PK
Data Sheet 10/33-2.1-EN Digital Indicator DS 9/48 P Digital Indicator DS 9/48 PK Inputs Direct current, direct voltage Thermocouple Resistance thermometer Programmable via front keys or PC software Limit
More informationIndicators and configurable displays
Contents Overview.2 Process value displays with LED display.4 Process value displays with LCD display.20 1460730000 2014/2015.1 Overview In industrial and process automation, displays provide a visual
More informationElectronic Circuit Breaker ESS20-0..
Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode power supply. DC 4 V power supplies,
More information1-Phase True RMS AC/DC Over and Under Current Types DIC01, PIC01
Monitoring Relays -Phase True RMS AC/DC Over and Under Current Types DIC0, PIC0 DIC0 PIC0 TRMS AC/DC over + under, over+over, under+under current and voltage monitoring relays DC process signal plus/minus
More informationThough the size is compact, the measurement display uses 4 digit, 8 mm in letter height, red 7-segment LEDs. Letter height 8mm (0.
SERIES Ultra-compact Digital Panel Controller CA Convenient s packed in a small body! Ultra-compact Large display Flexible scaling Conforming to EMC Directive Ultra-compact size of W 48 H 24 D 65.5 mm
More informationGeneral Specifications
General Specifications GS 77J0A070E Model VJA7 Distributor (Multifunction) (Isolated Singleoutput and Isolated Dualoutput Types) Overview This plugin type distributor is used in combination with wire type
More information