, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
|
|
- Barnard Quentin Morton
- 5 years ago
- Views:
Transcription
1 CHPTER FEEER GGE Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm leaf 7 - Thickness of leaves included () -.-..,.,.,.7,.8,.9,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9,. FEEER GGES leaf. Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm Thickness of leaves included () Quantity of leaves ,.,.,.,.7,.8,.9,.,.,.,.,.,..,.,.,.,.,.,.,.,.,.7,.8,.9,..,.,.,.,.,.7,.8,.9,.,.,.,.,.,.,.,.7, ,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9, ,.,.7,.8,.9,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9, ,.,.,.,.7,.8,.9,.,.,.,.8,.,.,.,.8,.,.,.,.8,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,. ONG FEEER GGES leaf Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm - () Thickness of leaves included () ,.,.,.,.,.,.,.,.,.7,.8,.9,..,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9,
2 CHPTER FEEER GGE STOCKS pcs/package - Used as shims to accurately set spacing Made of hardened alloy steel ength idth pcs/package T Thickness (T) ±µm ±µm ±µm ±µm ±µm ±µm ±µm ±µm ±µm ±µm Thickness (T) ±µm ±µm ±µm ±µm ±7µm ±7µm ±8µm ±8µm ±9µm ±9µm Thickness (T) ±9µm ±9µm ±µm ±µm ±µm ±µm ±µm ±µm ±µm FEEER GGE TPES Used as shims to accurately set spacing Made of hardened alloy steel ength m idth - T Thickness (T) ±µm ±µm ±µm ±µm ±µm ±µm ±µm ±µm ±µm ±µm Thickness (T) ±µm ±7µm ±8µm ±9µm ±9µm ±µm ±µm ±µm ±µm ±µm Thickness (T) ±µm ±µm ±7µm ±7µm ±9µm ±9µm ±µm ±µm ±µm PITCH GGES Check the pitch of screw thread : ±.7 Made of medium carbon steel TPI Thread type Tr CME 9 Pitch of leaves included,,,,, 7, 8, 9,,,,, -/, -/, -/,, -/,, -/,,,, 7, 8, 9,, TPI
3 CHPTER PITCH GGES Check the pitch of screw thread : ±.7 Made of medium carbon steel Metric screw Pitch of leaves included ().,.,.,.7,.7,.8,.9,,.,.,.7,,.,,.,,.,,.,,., 7.,.,.,.,.,.7,.7,.8,.9,,.,.,.7,,.,,.,,.,,.,,., ,.,.,.,.,.,.,.7,.7,.8,.9,,.,.,.7,,.,,.,,.,,., Unified screw 8- - TPI Pitch of leaves included, -/,, -/,, 7, 8, 9,,, -/,,,,,, 8,,,,, 7, 8,,,,, 8,, TPI hitworth screw 8- - TPI Pitch of leaves included, -/,, -/,, 7, 8, 9,,,,,,,, 8, 9,,,,, 7, 8,,,,, 8,, TPI TPI, -/,,, 7, 8, 9,,,,,,, 8, 9,,,,,, 8,,,,, 8,, TPI 8 Metric and hitworth screw Pitch of leaves included TPI TPI.,.,.,.,.,.,.,.7,.7,.8,.9,,.,.,.7,,.,,.,,.,,.,, -/,,, 7, 8, 9,,,,,,, 8, 9,,,,,, 8,,,,, 8,, TPI.,.,.,.7,.7,.8,.9,,.,.,.7,,.,,.,,.,,.,,., 7, -/,,, 7, 8, 9,,,,,,, 8, 9,,,,,, 8,,,,, 8,, TPI Metric and Unified screw Pitch of leaves included ,.,.,.7,.7,.8,.9,,.,.,.7,,.,,.,,.,,.,,., TPI, -/,, -/,, 7, 8, 9,,, -/,,,,,, 8,,,,, 7, 8,,,,, 8,, TPI CENTER GGES check the of screw cutting tools check the of screw thread 8- machine tools workpiece pitch To check and set screw cutting tools, and check the and pitch of screw thread ngle accuracy: ±min. set the position of screw cutting tools check the screw thread pitch Thread type ngle () METRIC UNIFIED HITORTH. and ths and ths on front side, ths and ths on back side ths and ths on front side, ths and ths on back side
4 CHPTER THRED GGES E 8-E machine tools workpiece To check and set screw cutting tools ngle accuracy: ±min. Made of medium carbon steel check the of screw cutting tools check the width of screw cutting tools set the position of screw cutting tools 8-8-E - -TPI Thread type Tr CME 9 Pitch,,,,, 7, 8, 9,,, -/, -/, -/,, -/,,,,, 7, 8, 9, TPI NGE GGE To check complementary s 8-9 marking ngle of leaves included 8- -,,,,,, 7, 8, 9,,,,, 8,,,,,, ±' NGE GGE SET 87 8 ±' Primary ½ primary Complementary Type 87 Each blade checks primary, / primary and complementary s Made of medium carbon steel ngle, are primary ngle is complementary ngle, are / primary type 8 7 ngle,,, are primary ngle, are complementary ngle 7, 8 are / primary type ' 7 ' ' 7 ' ' 7 ' ' 7 ' '
5 CHPTER RDIUS GGES 8-7 Made of medium carbon steel Radius of leaves included () ,.,.,.7,,.,.,.7,,.,,.,,.,,., 7 7., 8, 8., 9, 9.,,.,,.,,.,,.,,.,.,,., 7, 7., 8, 8., 9, 9.,,,,,, (internal + external ) ±. ±. ±. RDIUS GGE Radius of leaves included () 8-,.,,., 7, 7., 8, 8., - 9, 9.,,.,,.,,.,,.,,.,,.,,., pcs ±. 7, 7., 8, 8., 9, 9., 8- RDIUS GGE SET use of handle concave and convex gaging surfaces Each piece has concave and convex gauging surfaces Supplied with handle Made of medium carbon steel Radius of leaves included () ,,.,,.,,.,,.,,.,,., 7, 7., 8, 8., 9, 9.,,.,,.,,., ±. 8-7
6 CHPTER CHMFER GGE D D CHMFER GGE Measure º chamfer dimension. Satin chrome plated reading surface 7- D D 8- To measure internal and external chamfers 8-. ±. DT OUTPUT DIGIT CHMFER GGE Measure º chamfer dimension Resolution:./." uttons: on/off, set, /inch, preset (+, -) utomatic power off, move the digital unit to turn on power attery CR Data output Optional accessory: data output cable (code 7-, 7-SPC/SPC, 7-SPC) preset buttons + 8- measure º chamfer dimension external chamfer 8- -/-." ±. internal chamfer measure º chamfer dimension external chamfer 7- - ±. 8 internal chamfer TPER GGES For quick measurement of gap width Stain chrome plated reading surface a () b - reading reading -.-. ± ± ± a b side view front view 8
7 MM MM CHPTER TPER GGES measure diameter of hole measure slot width ØD front back hen measuring diameter of holes, correction on reading is needed due to the thickness of taper gage. For example, when reading is.9, diameter ØD is. () 8- Measure opening, slot width, hole diameter, etc. Diameter correction table on the back (only for 8-, 8-) ±. ±. ±. ± TPER GGE SET measure diameter of hole measure slot width ØD front 87- back hen measuring diameter of holes, correction on reading is needed due to the thickness of taper gage. For example, when reading is.9, diameter ØD is. Include pcs (-8, 8-, -, -9) Measure opening, slot width, hole diameter, etc. Diameter correction table on the back ±. EDING GGE fillet weld throat size 8 9 Stain chrome plated reading surface fillet weld throat size -8 -, 7, 8, 9.. ±. ±. ± 9
8 ..... CHPTER DIGIT EDING GGE TTENTION: NO DT OUTPUT fillet weld throat size uttons: zero, /inch, on/off attery R fillet weld throat size -7 -, 7, 8, 9 Resolution./."./." ±. ±. ± FIET EDING GGE Sizes marked on both faces Throat size,,, 7, 8, 9,, eg,, 7.,,,,, 8 ± throat size 7... leg. FIET EDING GGES convex weld concave weld Measure concave and convex weld sizes 7 blades are included 8-8- Size,,,, 8, 9,,,,,, 9,, /8" (.), /" (.8), /" (.), /" (7.9), /8" (9.), 7/" (.), /" (.7), /8" (.9), /" (9.), 7/8" (.), " (.) 8-8- ±. ±." (.). FIET EDING GGE Measure convex weld sizes blades are included H 87- convex weld size convex weld size,, 8,,, - ±. ±. 87-9
9 . CHPTER EDING GGE. front 8- back. Stain chrome plated surface 8- leg leg height throat size gap ±. ±. ±. ±. ± ±. ±. leg gap. EDING GGES front 88- back leg height leg height throat size. undercut depth throat size front 88- back 88- leg height undercut depth throat size weld gap x x77 ±. ±. ±. ±. ± ± ±. ± x8 ±. ±. ±. ±. ± ± ±. ±. weld gap
10 / / CHPTER EDING GGE IN / / / MM / / / IN / / MM / / fillet weld leg height front 8- scale back IN / / / MM / / IN / / / MM / / 8 pointer / / / / misalignment (high-low) undercut depth djustable scale to compensate pointer wear 9 IN MM MM IN MM / / / / / MM MM IN 8- fillet weld leg height misalignment (high-low) undercut depth fillet weld throat size of preparation - (-") - (-") - (-") - (-/8") - (-/") - - (-") (/") (/") (/") (/") (/") (/") ±. ±. ±. ±. ±. ± ±. ± / / fillet weld throat size of preparation FIET EDING GGE Calculating card is included weld seam height of acute weld seam height of obtuse calculating card (included) 8- θ 7 of preparation 8- weld seam height θ -/-" - 9 /.". ± ± ±. te measure weld seam height and θ, calculate theoretical throat size t e and leg height according to and θ. θ EDING GGE 8- leg height (a) theoretical throat size (b) throat size of preparation thickness ,,, 7,.,,. ±. ±. ±. ± ±. 8- a leg height (a) theoretical throat size (b) b of preparation. 7 throat size thickness 9.
11 POR. POR POR. POR POR. POR CHPTER EDING GGE 8- Pointer can be locked for later reference locking screw undercut depth 8- pointer POR. POR POR porosity size comparison POR. POR amount of porosity per 8- undercut depth porosity size comparison amount of porosity per - -.,.. ±. ±. ±. D 8 7 leg height 8- leg height theoretical leg height of convex weld theoretical leg height of concave weld ±. ±. ±. ±. theoretical leg height of convex weld theoretical leg height of concave weld EDING GGE EDING GGE 88- Ø. pointer misalignment (high-low) of preparation gap thickness 88- misalignment (high-low) of preparation gap thickness -~ ,.,.,.,.,.,.,.. ±. ±. ±. ±. ±.
12 CHPTER EDING GGE scale scale C scale reading line (on transparent plastic plate) PIPE EDING GGE C C scale scale scale C 8-. ± fit-up gap internal misalignment internal misalignment - ±. 8- fit-up gap.7-. ±. 8- PIPE EDING GGE bevel on end preparation pipe wall thickness 8. front back MM. internal misalignment fit-up gap bevel on end preparation pipe wall thickness internal misalignment fit-up gap 7. - ( -/") - ( -/8").,. - ( -/8") (/") (/") (/") ± ±. ±. ±. ±. H distance between two marking lines of socket weld H distance between two marking lines of socket weld - ( -/8") (/") ±. fillet weld fillet weld height - ( -/") - ( -/8") (/") (/") ±. ±. fillet weld and height
13 CHPTER DRI POINT GGE. For twist drills with 8, to check if the center of tip is concentric with the drill body ngle ength 8- ±. ±. 8-8 DRI NGE GGE 8 Check drills with, 7, 9, 8,,, or ±. 8-7 MERICN STNDRD IRE GGE Ø. For gaging non-ferrous wire and metals such as copper, brass and aluminum Hardened and satin chrome finish 88 Ø (8.-.7/.9-.") No (.9") 7. (.89"). (.7").8 (.9").9 (."). (.89"). (.").7 (."). (.8").9 (.").9 (.9"). (.97"). (.88") No (.7"). (."). (.7").9 (.8"). (."). (.").9 (.9").8 (.").7 (.8"). (.").7 (."). (."). (.79") No (.9").(."). (.").87 (."). (."). (.89"). (.8").8 (.7"). (."). (.").7 (.") U.S. STNDRD SHEET MET GGE Ø. Ø8. For gaging sheet metal, plate iron and steel Hardened and satin chrome finish ( /.-.7") No (.") 7. (.8").77 (."). (.").9 (."). (.88").9 (.").7 (.87"). (.79").99 (.").7 (.").7 (.").778 (.9") No (.98").98 (.78").78 (.7").88 (.").9 (.").7 (."). (.8").9 (.7").87 (.").79 (.").7 (.8"). (."). (.9") No (.88").7 (.7").97 (.").7 (.").8 (.").78 (.9").8 (.").8 (.9").8 (.8").98 (.78").79 (.7")
14 CHPTER step step INSIDE CIPERS Made of carbon steel h Size () () h 7- step step OUTSIDE CIPERS Made of carbon steel Size () () h 7- h INSIDE SPRING CIPERS step step tips Size () () Made of carbon steel step step OUTSIDE SPRING CIPERS Size () () tips Made of carbon steel
15 CHPTER SPRING DIVIDERS step step Made of carbon steel Hardened points Size () () DIVIDERS step step Made of carbon steel Hardened points 77- OODEN FODING RUE closed 7 b a Size () () a b () MESURING TPES EG II packaging locking knob H m -m -8m idth of tape () H 8 78 sections on both sides 7-7- m 7
16 CHPTER FEXIE RUES MDE IN US flexible use Flexible use on both sides Made of special alloy steel Satin chrome plated ()./././ +./-.9 +./ / T... T RIGID RUES MDE IN US Rigid rule on both sides Made of special alloy steel Satin chrome plated 7- () /././ +./-.9 +./ / T T RIGID RUE Rigid rules ith groove on the back, suitable for combination square set (code 78-8) Satin chrome plated 7- groove on the back front back. 7- /". and /" and /" ±. POCKET RUE ITH SIDING CIP 79- ith sliding clip, clip also can be used as depth gage base ith inch/metric conversion table on the back 79- /", /" ±. clip 8
17 CHPTER STEE RUES TTENTION: SIC MODE H :.,, /", /", /" Semi-flexible rules Non-glare surface /" /8" /" /" /" /" /" /8" /" /8" ±. ±. ±. ±. ±. ±. ±. ±. ±. ± H () Remark graduation on front and back graduation on front and back graduation on front and back graduation on front and back graduation on front and back graduation on front and back graduation on front and back graduation on front graduation on front graduation on front STRIGHT EDGES check flatness 7- Check flatness and straightness, as well as for marking on the beveled edge Made of hardened tool steel Chrome plated () Straightness of... marking rule () MRKING GGES Made of carbon steel Satin chrome plated ±. ±. ±. () T-SHPE MRKING GGE 7- Satin chrome plated reading surface ±. 9
18 CHPTER COMINTION SQURE SETS scriber Center head (made of cast iron): To locate center of cylinder with diameter (Ød): - : ±. Protractor head (made of cast iron): To set the blade at desired to an edge of a workpiece, and can be used to measure s : -8 : ±7min. Square head (made of cast iron): To set the blade at 9 or to an edge of a workpiece : ±8min for 9 square, ±min for square lade (made of stainless steel): : /", :. and /" on front face, and/" on back face Optional accessory: rigid rule (code 7) level square head 7 protractor head blade Remark -piece set -piece set -piece set center head locate center set 9 level 9 Ød protractor set rule and marking Square head (made of zinc): To set the blade at 9 or to an edge of a workpiece : ±. lade (made of stainless steel): :, :. and on front and back sides square head level scriber IGHT DUTY COMINTION SQURE 9. blade set 9 set 7-7- CENTER MRKING GGES center C Ød step step step () Size (x) Diameter of shafts (Ød) C X7 x x ±. ±. ±. Marking the center of round plates and shafts Satin chrome plated
19 CHPTER SCRIING CIPER the position of scriber tip can be adjusted Satin chrome plated reading surface Carbide scriber tip Optional accessory: carbide scriber tip(code SP-SCRIER-7 ) /-8"., /8" ±. 7. Ø Ø8 DIGIT SCRIING CIPERS The carbide-tipped jaws facilitate scribing on workpieces Resolution:./." uttons: on/off, zero, /inch utomatic power off, move the digital unit to turn on power attery CR, data output Optional accessory: data output cable (code 7-, 7-SPC/SPC, 7-SPC) DT OUTPUT -/-" -/-8" -/-" () a b c d d ±. ±. ±. a d d b c SCRIING CIPER 8 Ø8 Satin chrome plated reading surface 7- Hardened scriber tips ±. HEIGHT SCRIER Ø Grooved bottom for cylinder Two pins to be set against the edge of surface plate ()x8(d) fine adjustment pin push surface plate SCRIERS Nickel plated Tip hardened tips hardened tip carbide tip Ø Ø
Precision Square SERIES 916. Precision Dial Square SERIES 7. Spring Dividers and Calipers SERIES 950 SPECIFICATIONS
Precision Square SERIES 916 Three types of square are available. All edges are hardened and precision ground. 916-402 with stand 916-213 Standard type 916-102 Beveled-edge type Size (H x W) Order No. Remarks
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More informationMeasuring and Laying-Out Tools, Testing Instruments
ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade
More informationPrecision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
More informationHAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
More informationQuality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
More informationHAND TOOLS. Carpenters Square. Basic Combination Set 520 Series
Carpenters Square Steel base and ergonomic design for ease of use Allows positive location and clamping Offers fixed angles: 45, 90 With mini carbide scriber and level vial Squareness within 0.2mm / 300mm
More informationMETRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
More informationStarrett Year End Sale! Electronic Caliper 799A Series. Best Buys on Starrett Products
JW DONCHIN CO. Starrett Year End Sale! Electronic Caliper 799A Series No. 799A 6/150 List Price $125.00 SALE PRICE $100.00 Best Buys on Starrett Products Electronic Caliper - No. 799A Series Electronic
More informationBevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR
T-SLIDE BEVEL - ABS HANDLE For determining existing angles or transferring angles onto a workpiece Slotted hardened steel blade allows the user to accommodate a wide range of different size work pieces
More informationCAN BE INSTALLED DIGITAL DEPTH GAGE WITH EXTENSION BASE DATA OUTPUT 48-52, MM/INCH
E16 SPECIAL MEASURING JAWS GAGE *The mm measuring jaw can be customized according to design drawing or measurement item of workpiece Unit: to suit your particular requirements. E17 Digital Caliper (Tungsten
More informationEach Height Master is supplied with a gauge block for reference-height setting. Fitted wooden case supplied. SPECIFICATIONS
Height Master SRIS 515 Models with the the staggered arrangement of blocks have two measuring faces on the same level, one facing up and the other down (except for 515-310). Staggered 20mm blocks (movable)
More informationInspection Kit Alignment, Measurement & Weld Measuring Gauges Model: IK-BACT13. Welders, CWI Inspectors, Instructors
Inspection Kit Inspection Kit Alignment, Measurement & Weld Measuring Gauges Model: IK-BACT13 Brief Aluminium Case Type Size: 430mm x 290mm x 35mm Welders, CWI Inspectors, Instructors Now You Can Design
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationCombined Drills & Countersinks. Countersinks Chatterless with Hole
INDUSTRIAL INC. TORONTO MONTRÉAL EDMONTON www.kar.ca WINTER SALE Combined Drills & Countersinks High Speed Steel, TiN Coated & Cobalt 60º Plain Type 60 Angle (Series 115) 60 Angle TiN Coated (Series 08115)
More informationComponents of Gauge and Overview:
Cat 30 (Standard) and Cat 31 (Metric) Product Information and Usage Guide (Import) (Metric is used in demonstrations) Metric Standard Components of Gauge and Overview: The CAT 30 (standard) and CAT31 (metric)
More informationUNIT 9 TOOLS FOR BASIC LAYOUT
UNIT 9 TOOLS FOR BASIC LAYOUT Tools for Basic Structure 9.1 Introduction Objectives 9.2 Tools for Scribing 9.3 Accessories 9.4 Summary 9.5 Key Words 9.1 INTRODUCTION The process of making reference mark
More informationBest MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationElectronic Indicators. Advanced Model
Electronic Indicators Advanced Model Meets ASME B89.1.10M-2001 standards 320 degree rotating display digital/analog Stem diameter: 3/8 Button functions: tolerance GO and NOGO display, data preset, measuring
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationHow to use. Use example. Non-scratch sheet prevents die marks. Tight-knit super fiber provides a working life of many hundreds cycles.
How to use Small to Medium dies Fix Kizu-non on the die shoulder with masking tape. Should not be crinkled. *Cut Kizu-non with scissors for desired length. Large dies Fix Kizu-non on each die shoulders.
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
More informationSAVINGS FOR FALL. Electronic Calipers. Resolution: /0.01mm Battery CR2032 Supplied in fitted storage case. Coolant Proof.
INDUSTRIAL INC. TORONTO MONTRÉAL EDMONTON www.kar.ca SAVINGS FOR FALL Purchase 200 of INSIZE product and receive an INSIZE HAT FREE! While Quantities Last INSIDE Savings at a glance... COMBO COMBO COMBO
More informationASSIGNMENT 2. Textbook Assignment: 2-1. Levels are designed for which of the following purposes?
ASSIGNMENT 2 Textbook Assignment: "Levels," "Plumb Bulbs," "Scribers," "Squares," "Surface, Depth, and Height Gages," "Ring and Snap Gages and Gage Blocks," "Miscellaneous Measuring Gages," "Pliers and
More informationProtractors / Clinometers / Spirit levels
Protractors / Clinometers / Spirit levels Accuracy of clinometers/spirit levels according DIN 877 Graduation Flatness (µm) µm/m " (L = length in ) 50 10 4 + L / 250 > 50-200 > 10-40 8 + L / 125 > 200 >
More informationModule-2 Lecture-2 Combination set, Vernier calipers. (Refer Slide Time: 00:16)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-2 Lecture-2 Combination set, Vernier calipers
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More informationCARPENTRY & MEASURING TOOLS CATALOGUE
CARPENTRY & MEASURING TOOLS CATALOGUE 2 CARPENTRY TOOLS CARPENTRY TOOLS 3 SMC - 431 T - BAR CRAMPS Bar Manufactured From Special 'T' Bar Section Steel Head & Slide Made Of Cast Iron Suitable For Heavy
More information2014 Promotional Products
2014 Promotional Products 1 2 + 1 2 Asimeto delivers the Value Plus 12+12 Warranty Program to guarantee the accuracy and reliability of all products. Simply visit Asimeto.com and register your tool(s)
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationTOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationSeamers, Folding Tools & Brake
Hand Seamers with Die-Cast Zinc Jaws S5 Compact 5 (127 mm) Jaws with Big 2 (51 mm) Bending Depth Hand Seamers with Forged Steel Jaws Seamers, Folding Tools Not for use with steel S9 Big 9 (229 mm) Jaws
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationMetrology (0) PROMO 13.1E. Resolution:.0005" (0.01mm).0005" (0.01mm) Grads
Metrology PROMO 13.1E Automatic off after 5 minutes with no loss of position Accuracy meets DIN862 Resolution:.0005" (0.01mm).0005" (0.01mm) Grads Call 00 44 (0)1835 863501 today IP67 Electronic Calipers
More informationFITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationALL-INCLUSIVE, EASY TO USE
THE ESSENTIAL METROLOGY CATALOGUE 16/17 Partners in Precision Hand Tools INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationCA03B. Measuring Equipment
CA03B Measuring Equipment Groz is a leading manufacturer of quality tools & precision equipment to industry worldwide. Over the years we have developed into a respected global leader. Our first class reputation
More informationLINEAR MEASUREMENT. Prof.H M Prajapati & Prof. A R Sankhla
LINEAR MEASUREMENT Introduction Classification Based on the type of standard Line measurement End measurement Based on precision Precise Direct: Vernier caliper, Micrometer Indirect: Telescopic gauge,
More informationComparative Measuring Instruments
Comparative Measuring Instruments F-1 TESA YA Internal Measuring Instruments Specially designed for small bores from 0,47 up to 12,20 Determine dimensions as well as form and shape deviations through 2-point
More informationTaps. Taps - Technical Info. Torque Cut High Performance HSSE Ring Colored Taps Technical Information. - Technical Information
Torque Cut High Performance HSSE Ring Colored Taps Technical Information RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and
More information359 Precision Universal Bevel Vernier Protractors - Graduations in Degrees through 360º In Case
359 PRECISION UNIVERSAL BEVEL VERNIER WITH FINE ADJUSTMENT GRADUATIONS IN DEGREES THRU 360º These tools are designed for precision measuring and for laying out angles. The protractor is one of the most
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationT360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
More informationDOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
More informationCabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationPunch Formers, Punches & Scribers
Centerless Punch Grinders High accuracy Centerless - no alignment necessary Rollers accept 0.06 1 diameters Model Weight PGA 5.5 kg 302470 Motorized Motor 110V, 25 watts Roller speed: 130 RPM D: 1.5-25mm
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationHigh Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
More information2 edges Tip-Bar for micro boring HP type
2 edges Tip-Bar for micro boring P type New proposal for cost reduction igh cost performance with 2-edge insert Boring Back Boring Grooving ace Grooving Threading rom -edge to 2-edge insert 2 edges Tip-Bar
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationSpring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
More informationMeasuring and laying-out tools, gauges
Measuring and laying-out tools, gauges Slide calipers Micrometer gauges Thread measuring wires Setting gauges Multi-purpose measuring devices Accessories Gauge blocks Gauges Gauge ball sets Flatness testers
More informationFeatures. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
More informationFeatures. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationDEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationCUTTERS CUTTERS
14 www.eclipsetools.com High grade alloy steel Induction hardened cutting edges Double leaf springs Hot drop forged Mirror polished surface 4-1/2 Semi-Flush Diagonal Cutter Oil hardened & tempered Hot-formed
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationCutting Tools. Round Tooling TMX-TOOL Fax
Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE
More informationChapter 13 SQUARES HOW TO CHOOSE AND USE THEM TM The Types and Uses section provides you with a list of
Chapter 13 SQUARES HOW TO CHOOSE AND USE THEM The Types and Uses section provides you with a list of the types of squares. These pages should help you select the right square for the job. The Using Squares
More informationDEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationTools Step Drill Bits
Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid
More informationPliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces
Content Pliers. Page Article group Page Article group Heavy Duty Combination Pliers. 197 Heavy Duty Combination Pliers 198 Long Round Nose Plier 198 Long Flat Nose Plier 198 Chain Nose Pliers, straight
More informationLOC ATING COMPONENTS. Locating Components
Adjustable Jack Screws... 212 Adjustable Locating Buttons... 212 Alloy Steel Pull Dowel Pins...198 199 Bullet Nose Dowels... 219 Bullet Nose Pins... 220 Drift Handles... 213 Fixture Jacks... 212 Fixture
More informationSQ2 User Instructions SQ2 Overview:
SQ2 User Instructions SQ2 Overview: The stationary circular saws including table, radial and chop saws are arguably the most important tools in the shop. They may also be the most difficult to reliably
More informationCurriculum for Mechanical Sub Overseer
Curriculum for Mechanical Sub Overseer Council for Technical Education and Vocational Training Curriculum Development Division Sanothimi, Bhaktapur 2005 Course Structure of 15 Month Curriculum of Mechanical
More informationCOFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock
Deburring Tool for Elliptical or Contoured Surfaces increased performance from stock Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 The HEULE COFA deburring tool removes burrs from the front and
More informationSikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors
SikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors SikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors OPERATION 3 point locking mechanism
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationJET Heavy-Duty B3NCH 10" Jobsite Table Saw
JET Heavy-Duty B3NCH 10" Jobsite Table Saw The JET Heavy-Duty 10" Jobsite Table Saw brings many of the capabilities of a full-sized table saw to the jobsite, small or temporary woodworking shops. The unique
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationCUTTERS CUTTERS
www.eclipsetools.com 14 co s. nt ne po om ec lin on m High grade alloy steel Induction hardened cutting edges Double leaf springs Hot drop forged Mirror polished surface 4-1/2 Semi-Flush Diagonal Cutter
More information1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe
1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
More information20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered
20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3
More informationGeneral Machining, Fitting and Assembly Applications A/508/5164
Unit Title Ofqual unit reference number (code) Organisation Reference General Machining, Fitting and Assembly Applications A/508/5164 QU051773 Unit Level Level 2 Unit Sub Level None GLH 55 Unit Credit
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationComparative Measurement
Comparative Measurement H-1 TESA YA Bore Gauges TESA YA Complete Instrument SETS Specially designed for small bores from 0,47 up to 12,20 - Checking of dimension and bore form errors through 2-point measuring
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationThread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More information