SAVINGS FOR FALL. Electronic Calipers. Resolution: /0.01mm Battery CR2032 Supplied in fitted storage case. Coolant Proof.
|
|
- Darrell Logan
- 5 years ago
- Views:
Transcription
1 INDUSTRIAL INC. TORONTO MONTRÉAL EDMONTON SAVINGS FOR FALL Purchase 200 of INSIZE product and receive an INSIZE HAT FREE! While Quantities Last INSIDE Savings at a glance... COMBO COMBO COMBO Dial Indicator & Magnetic Stand Electronic Caliper & Drill Set 3 Face Mill & 10 RCMT Inserts BLOWOUT Ceramic Blade Tools BLOWOUT Large Size Inserts BLOWOUT Machining Chucks BLOWOUT Cross-Slide Tables SPECIAL SPECIAL Spade Drill Inserts Boring Head Set Electronic Calipers Resolution: /0.01mm Battery CR2032 Coolant Proof Absolute Zinc Alloy Casing Buttons: on/off, zero, inch/mm Accuracy: ± Auto power off Data output (Optional SPC cable) Stainless steel 0-6/ / / Accuracy: ± Buttons: zero, on/off, inch/mm, ABS/REL, hold Stainless steel 0-6/ / / Accuracy: ± (except ± ) Buttons: Inch/mm, ABS/REL, on/off, origin set Auto power off Data output (Optional SPC cable) Stainless steel 0-6/ / / Accuracy: ± Buttons: zero, on/off, inch/mm Auto power off 0-6/ / / sales@duramill.ca Tel: (905) Fax: (905) Bradwick Drive, Units 2-3, Concord ON L4K 1K6 FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
2 Dial Calipers Outside Micrometers Graduations: One revolution equals: 0.1 Shock proof dial indicator Supplied in fitted storage case Accuracy 0-6 ± ± ± : 1 Meets ASME B M-2001 standards Overall accuracy: ±0.002 Lug back Bezel locking clamp and tolerance index Contact point thread: #4-48UNF 2 Graduation First 2.5 Rev Accuracy Dial Indicators per Rev Dial Reading ± ± Dial Indicator & Dual Stem Magnetic Stand Combo INDICATOR: See details above Electronic Outside Micrometer Coolant Proof PROMO8 STAND: Magnetic force: 132lbf/60kgf Applicable holding stem diameters: 3/8, 8mm, 4mm Resolution: /0.001mm Accuracy: ± Coolant/dust proof Buttons: on/off, set, inch/mm, ABS/INC, data output Auto power off Battery LR44 Ratchet stop Carbide tips 0-1/ Supplied with spherical anvil Graduation: Ratchet stop Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Blade Micrometers Measures the groove diameters of shafts and keyways Graduation: Non-rotating spindle Ratchet stop Micrometers over 1 are supplied with a setting standard Accuracy 0-1 ± ± ± ± Sets 0-3 (3 pcs) (6 pcs) Accuracy 0-1 ± ± ± ± ± ± ± Micrometer Stand For micrometers up to 4 Cast stand with two separate locking handles
3 Metric Size M2 x M2.2 x M2.5 x M3 x M3.5 x M4 x M5 x M6 x M7 x M8 x M9 x M10 x M11 x M12 x M14 x M16 x Supplied with GO and NO-GO end Class 6H ISO1502 standard THREAD PLUG GAGES SUPPLIED WITH MANUFACTURER INSPECTION CERTIFICATE Feeler Gage : Hardened alloy steel (except 0.01 gage - brass) 32 blades individually marked with inch/metric measurements Supplied in storage pouch Thread Plug Gages Size M18 x M20 x M22 x M24 x M27 x M30 x M33 x M36 x M39 x M42 x M45 x M48 x M52 x M56 x M60 x American Standard Size 4-40UNC UNC UNC UNF /4-20UNC /4-28UNF /16-18UNC /16-24UNF /8-16UNC /8-24UNF /16-20UNF /2-13UNC /2-20UNF /16-18UNF /8-11UNC /8-18UNF /4-10UNC /4-16UNF Combination Squares Supplied with GO and NO-GO end Class 2B ANSI B1.2 standard Thickness of Leaves Accuracy (brass) ± , ± , 0.003, 0.004, 0.005, 0.006, ± , ± , ± , ± , ± , ± , ± , ± , ± , 0.025, ± ± ± , ± Used as square, level, marking gage, scriber, center gage, protractor and 12 steel rule Center Head: to locate center of round workpieces - Accuracy: ±0.006 Protractor Head: to set the blade at desired angle to an edge of a workpiece, and may be used to measure angles - : º; Accuracy: ±7min. Square Head: to set the blade at 90º or 45º to an edge of a workpiece - Accuracy: ±8min. for 90º square and ±10min. for 45º square Blade Graduation 12 /300mm 12 1/32 and 0.5mm on one side, 1/64 and 1mm on reverse side 1/8 and 1/16 on one side, 1/32 and 1/64 on reverse side º Protractor Graduations: 1º Accuracy: ±0.3º Stainless steel with satin chrome plated scale With locking screw Supplied in storage case Block Levels V-groove on bottom for shafts (shaft diameter 0.63 to 2.76 ) Sensitivity: /10 With transverse vial Supplied with adjusting wrench
4 Chatterless Countersinks with Hole Cobalt M35 The hole-style deburring tool is designed to countersink and chamfer light metals and plastics The finish is smooth and free of burrs Lubrication is recommended D Overall d Shank *Three gripping flats on shank Chamfer Min/Max L Overall 100º Angle Series º Angle Series / / / * * Piece Sets Sizes included: Inch 1/4, 7/16, 9/16, 13/16 and 1-3/16 Metric 10 mm, 15 mm, 20 mm, 25 mm and 30 mm /ea. Included Angle Inch Metric CNC Spotting Drills Cobalt Multi- Step Drill Set High Speed Steel Flute Overall 90 Angle Series Angle Series 196 1/8 3/ /16 5/8 2-3/ /4 7/8 2-5/ / / /2 1-3/ /8 1-3/8 4-1/ /4 1-5/8 5-1/ /4 5-1/ PIECE SETS 1/4, 3/8, 1/2, and 5/ Capacity L H d 12 4, 5, 6, 7, 8, 9, 10, 11, , 6, 8, 10, 12, 14, 16, 18, , 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, Series Electronic Caliper & Jobber Drill Set Combo CALIPER: See page 1 for details PROMO DRILL SET: High speed steel - TiN coated Gold-P 1/16 to 1/2 by 64ths 135º split point Straight shank Right hand spiral wide flutes Supplied in metal index 4
5 Chamfering Biconical Cutters K15 Carbide Front & Back Standard 4 Flute Bi-Face 90 Angle (Series 8490) Used for front, back, deburring, v-grooving, top and bottom chamfering Special design equals positive cut plus relieving profile Unequalled surface finish Impressive performance Extended tools profile life Inch d2 d3 Max. T Max. L Min (3) (4) (5) (6) (8) (10) (12) (16) l2 l3 Pulley Taps High Speed Steel Ground Thread These taps have the same major and pitch diameters as standard fractional size taps, but with extended shanks for reaching locations inaccessible with regular hand taps. Thread Tap Overall Overall Overall Size 1/ / / / / / / / / / / / Ask about your FREE Tap/Drill Wall Chart on your next order! Pipe Taps HSSE-V3 Spiral Flute For cast iron, steel and stainless steel applications NPT and NPTF standards High speed steel substrate with cobalt and 3% vanadium content for cutting stainless steels up to 29 HRC and tool steels up to 35 HRC Size Thread per Inch No. of Flutes Overall Thread 1/ / / / / / / / / / / / / / /4 11-1/ /2 11-1/ / / / While Quantities Last 5
6 Deburring Set Set B Classic Popular set for holes, slots and edges Supports all B blades Blades can be inserted axially or perpendicular to holder Deburrs steel, aluminum, copper, brass, cast iron, stainless steel and plastics Mango II Long Reach Bonus Pack Set Telescopic holder B for long reach applications Popular for deburring holes, slots and edges on most types of materials Includes 10 high speed steel blades and a Mango II handle Set Name Handle Holder Blades Shaviv Set B Classic A B B10 B Set Name Mango II Set B Bonus Pack Handle Holder Blades Mango II B 10 x B Golden Flex Sets TiN Coated Blades Set B for standard deburring with five different pair of TiN coated multi-purpose B blades Set E for heavy duty deburring with five different pair of TiN coated multi-purpose E blades Multi-Purpose Blade Sets TiN Coated B & E Blades Set B Set E Set Name Shaviv Golden Flex Set B Shaviv Golden Flex Set E Handle Holder Blades Aluminum Aluminum B E 2 x B10P 2 x B11P 2 x B12P 2 x B20P 2 x B30P 2 x E100P 2 x E110P 2 x E111P 2 x E200P 2 x E300P For standard deburring Includes five pair of blades: 2 x B10P 2 x B11P 2 x B12P 2 x B20P 2 x B30P For heavy duty deburring Includes five pair of blades: 2 x E100P 2 x E110P 2 x E111P 2 x E200P 2 x E300P Set Name Multi-Purpose Blade Set B Multi-Purpose Blade Set E BLOWOUT PRICES! BLOWOUT PRICES! BLOWOUT PRICES! BLOWOUT PRICES! Cera-Burrs Ceramic Blade Tools /ea For deflashing plastics and deburring soft metals Curved blades to reach arched and angled areas High quality ceramic blade affixed on strong, lightweight handle Ideal for removing unwanted mold gate trim on plastic work pieces Avoid accidents commonly occurring with utility blades Straight Edge Hole Edge Slot/ Keyway Sheets Mold Gate Trim Set Name Handle Blades Cera-Burr Glo-Burr Permanent Cera-Burr Curve Q11 Glo-Burr Permanent WHILE QUANTITES LAST 6
7 Shell Mill Adapters CAT40 & CAT50 Taper to pilot runout: < Taper shank ground to AT3 accuracy or better H6 pilot tolerance AD+B coolant through spindle and flange Balanced by design Non-coolant arbor screw supplied CAT40 draw bar threads: 5/8-11 CAT50 draw bar threads: 1-8 Wrench size (Allen key): 5/16 Drive key size: 3/8 Broach Sets CAT40 CAT50 D1 D2 L Weight Weight (lbs) (lbs) Face Mill with 10 RCMT Inserts Combo 20 % OFF All dumont Broach Sets Starting at x PROMO Supplied in storage boxes complete with precision broaches, slotted bushings, and necessary shims Collared bushings are recommended and supplied unless plain bushings are specified on your order FACE MILL: FMR A1.00 -RC12-05 MULTI-MAT INSERT: RCMT 1204 MO PVD Coated LT10 Set Name No. 00 Precision Set No. 10 Standard Set No. 10A Standard Set No A Combination Set No. 20 Combination Set No. 40A Set , No. 40 Set , No. 40-1/2A Heavy Duty Set , No. 40-1/2 Heavy Duty Set , No. 50 Heavy Duty Set , No. 60 Metric Set No. 70 Metric Set No. 80 Metric Set , No. 90 Metric Set , No. 100 Heavy Duty Combination Set , FOR SET DETAILS VISIT OR ASK YOUR DISTRIBUTOR BUY 3 GET 1 FREE Spade Drill Inserts Super Cobalt (T15) TiN Coated & TiAlN Coated Starting at (Same series or smaller) TiN Coated For use with high nickle alloys and materials with hardness over 29HRC TiAlN Coated TiN COATED: Titanium Nitride reinforces the wear resistance, hardness and toughness of the tool TiAlN COATED: Titanium Aluminum Nitride has a higher hardness than TiN which greatly increases the tool life and can withstand higher temperatures when machining cast irons and tough steels BLOWOUT PRICES! BLOWOUT PRICES! Large Size Inserts Carbide CVD Coated LT35/45 CNMG CNMM /ea. ANSI L S R CNMG 643 NR CNMG 644 NR CNMM 644 NR WHILE QUANTITES LAST Series: Min. to Max. Inch Y: to (9.50 to 11.07) Z: to (11.10 to 12.95) 0: to (12.98 to 17.65) 1: to (17.53 to 24.38) 2: to (24.41 to 35.05) 3: to (34.36 to 47.80) 4: to (46.99 to 65.28) 7
8 Ball-Bearing Drill Chucks & Key For Production Drilling Equipment Hardened and ground Fits tools up to 25mm (1 ) Capacity mm Mount Dia. Closed/Open Weight (g) 1-8 (1/32-5/16) J / (1/32-3/8) J / (1/32-1/2) J /94 1, (1/32-5/8) J /102 1, (1/32-3/4) J /125 2, (13/64-1) J /147 3, Knurling Tool Balanced Forming Style Revolving head carries three pairs of knurls fine, medium, and course any of which can be turned into the operating position The two models are identical, except for the pattern of knurls employed /ea. Model Holder Size Cutter Knurling Type Net Weight M2-D 0.98 x 0.98 x 6-1/2 Spiral Diamond 1 lb/10 oz M2-S 0.98 x 0.98 x 6-1/2 Straight Straight 1 lb/10 oz BLOWOUT PRICES! BLOWOUT PRICES! Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body Handle is set on the face and does not interfere with table A number of chucks can be used together Size 165 x , x , WHILE QUANTITES LAST FOR DETAILS VISIT OR ASK YOUR DISTRIBUTOR BLOWOUT PRICES! BLOWOUT PRICES! Cross-Slide Tables Inch Reading Model 600 XYG , X , X , X , X , Single Axis Fixed Base FOR DETAILS VISIT OR ASK YOUR DISTRIBUTOR WHILE QUANTITES LAST General tolerance ±0.03 Double Axis Swivel Base General tolerance ±0.03 /180º table rotation SPECIAL PRICE! Boring Head Set Including wrenches, a variety of boring bars and supplied in fitted case Shank: 3/4 SS Capacity 0-4 Bore size: 1/ Purchase 200 of INSIZE product and receive an INSIZE HAT FREE! While Quantities Last # Offer valid until December 31, 2018 *Products shown may not be exactly as illustrated FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
TOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
More informationCombined Drills & Countersinks. Countersinks Chatterless with Hole
INDUSTRIAL INC. TORONTO MONTRÉAL EDMONTON www.kar.ca WINTER SALE Combined Drills & Countersinks High Speed Steel, TiN Coated & Cobalt 60º Plain Type 60 Angle (Series 115) 60 Angle TiN Coated (Series 08115)
More informationElectronic Indicators. Advanced Model
Electronic Indicators Advanced Model Meets ASME B89.1.10M-2001 standards 320 degree rotating display digital/analog Stem diameter: 3/8 Button functions: tolerance GO and NOGO display, data preset, measuring
More informationDEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.
More informationFALL FEATURES AT KAR!
INDUSTRIAL INC. TORONTO MONTRÉAL EDMONTON www.kar.ca FALL FEATURES AT KAR! Thread Plug Gages NEW Metric American Standard NPT Supplied with GO and NO-GO end Class 6H ISO1502 standard Size (mm) Price M2
More informationDEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.
More informationINDUSTRIAL INC Cutting Fluids Premium Hand Taps. Taper, Plug & Bottoming Style
INDUSTRIA INC. Cutting Fluids Premium Hand Taps Taper, Plug & Bottoming Style HSS UNC UNF UNS USCTI 302 9P/5P/2P Bright Thread Depth/Hole Type 2.0 x D 3.99 /ea. For tapping, drilling, milling, facing,
More informationMetrology (0) PROMO 13.1E. Resolution:.0005" (0.01mm).0005" (0.01mm) Grads
Metrology PROMO 13.1E Automatic off after 5 minutes with no loss of position Accuracy meets DIN862 Resolution:.0005" (0.01mm).0005" (0.01mm) Grads Call 00 44 (0)1835 863501 today IP67 Electronic Calipers
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationMIX & MATCH CAT40 ER Collet Chucks & Collets
Canadians Supporting Canadians Pricing valid from January 1 to March 31, 2019 2019 Winter Flyer MIX & MATCH CAT40 ER Collet Chucks & Collets Huge Savings on a 6-Pack CAT40 ER Collet Chucks 1. Select 6
More informationINTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS
INTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS TAP SELECTION GUIDE HAND TAPS 3 SPIRAL POINT TAPS Plug Style 4 SPIRAL FLUTE TAPS Bottoming Style 5 SPIRAL POINT TAPS Plug Style 6-7 SPIRAL
More informationStarrett Year End Sale! Electronic Caliper 799A Series. Best Buys on Starrett Products
JW DONCHIN CO. Starrett Year End Sale! Electronic Caliper 799A Series No. 799A 6/150 List Price $125.00 SALE PRICE $100.00 Best Buys on Starrett Products Electronic Caliper - No. 799A Series Electronic
More informationBevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR
T-SLIDE BEVEL - ABS HANDLE For determining existing angles or transferring angles onto a workpiece Slotted hardened steel blade allows the user to accommodate a wide range of different size work pieces
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationCutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationMETRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
More informationSolid Carbide Thread Milling Cutters
Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than
More informationFREE HSS TiAlN Tip Drill Set
Canadians Supporting Canadians CAT40 Taper Tooling to 30,000 CAT50 Taper Tooling to 25,000 DIN Coolant Option - Standard All Ground Body 100% Forged Construction Pricing valid from July 1 to September
More informationCutting Tools. Round Tooling TMX-TOOL Fax
Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationOptimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
More informationThread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
More informationSTATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationTools Step Drill Bits
Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationPremium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
More informationCA03B. Measuring Equipment
CA03B Measuring Equipment Groz is a leading manufacturer of quality tools & precision equipment to industry worldwide. Over the years we have developed into a respected global leader. Our first class reputation
More informationSYMBOL INDEX HSS V3. Special heat treatment. HSS-Co 8% CARBIDE. Powder Steel High performance ASP 23 BI/CV. GOLD Gold finish HARD LUBE
526 Technical Information GENERAL ICONS DIN DIN Norm TOL Tolerance Standard quality Professional quality Extra porfessional quality Supreme quality MATERIALS High speed steel M2 quality G High speed steel
More informationEach Height Master is supplied with a gauge block for reference-height setting. Fitted wooden case supplied. SPECIFICATIONS
Height Master SRIS 515 Models with the the staggered arrangement of blocks have two measuring faces on the same level, one facing up and the other down (except for 515-310). Staggered 20mm blocks (movable)
More information, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
CHPTER FEEER GGE Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm leaf 7 - Thickness of leaves included () -.-..,.,.,.7,.8,.9,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9,.
More informationMetal Drilling
www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle
More informationMACHINE TOOL ACCESSORIES
DRILL CHUCKS SERIES 319: MACHINE SHOP DISCOUNT SUPPLY BALL BEARING KEY TYPE SUPER CHUCKS SERIES 319: These chucks, robust in design, have great precision. All parts subject to wear are hardened for high
More informationMeasuring and Laying-Out Tools, Testing Instruments
ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationCanadians Supporting Canadians Pricing valid from July 1 to September 30, 2014
Canadians Supporting Canadians Pricing valid from July 1 to September 30, 2014 2014 Summer Flyer 8PC ULTIMATE METROLOGY KIT The International Manufacturing Technology Show is one of the largest industrial
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationSpecial Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
More informationICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com COMBINED DRILL & COUNTERSINKS COBALT PLAIN TYPE...5 BELL
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationSTRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
More informationCross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
More informationChapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationPrecision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
More informationHAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
More informationFREE DOUBLE CLAMP VISE WITH FREE ALUMINUM SOFT JAWS. Code No.: $1, net. Canadians Supporting Canadians.
Canadians Supporting Canadians KEYWAY BROACH SETS WITH COLLARED BUSHINGS Pricing valid from October 1 to December 31, 2018 2018 Fall Flyer MADE IN THE USA Dura-Case Model No. Description EDP No. Code No.
More informationPunch Formers, Punches & Scribers
Centerless Punch Grinders High accuracy Centerless - no alignment necessary Rollers accept 0.06 1 diameters Model Weight PGA 5.5 kg 302470 Motorized Motor 110V, 25 watts Roller speed: 130 RPM D: 1.5-25mm
More informationASSIGNMENT 2. Textbook Assignment: 2-1. Levels are designed for which of the following purposes?
ASSIGNMENT 2 Textbook Assignment: "Levels," "Plumb Bulbs," "Scribers," "Squares," "Surface, Depth, and Height Gages," "Ring and Snap Gages and Gage Blocks," "Miscellaneous Measuring Gages," "Pliers and
More informationFax Web Phone APX150 Milling Machine Power Feed X Traverse 150Lbs Torque
90V Premium CNC Milling Machine Vise "x8.9" APX0 Milling Machine Power Feed X Traverse 0Lbs Torque ~7 P0 0-099 $0.00 90º Square Shoulder Indexable Coolant Thru Face Mills * Insert Not Included APKT PDER
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationMission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
More informationMetal Drilling. Engineered for Controlled Precision and Speed METAL DRILLING. Tip Geometry. Drill Bit Selection. 135 Split Point
Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : Point Angle: Drill Diameter: Shank : : Tip Geometry 118 Conventional Point 118 Point Angle 135 Split
More informationPlus Our NEW Quick Delivery Step Drill Program
LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range
More informationQuickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
More informationFeatuRes OF GeOMetRy. synchro tapping chuck (er type) advantages. GUIdE LINE TO ICONS
FeatuRes OF GeOMetRy synchro tapping chuck (er type) advantages GUIdE LINE TO ICONS Working Material GS s with good machinability Rm
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower UNIVERSAL TAPS. power ful. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER UNIVERSAL TAPS SAL UNIVERSAL
MADE BY UNIVERSALtaps TOP QUALITY FROM GERMANY at a Power Price TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT Form universal
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationDRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger
DRILLING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger DRILL PRESSES BENCH fact sheet 8" BENCH DRILL PRESS Dayton's light duty drilling machine combines performance and economy into one. It s an ideal choice
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More informationUnequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry " at spindle nose.
CATALOG 1258-4 Unequalled accuracy The Clausing is a precision machine tool built to tolerances that are tightest in the industry. Spindle taper (internal).0002" run-out is within.0002" at spindle nose.
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationBroaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationwith better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
More informationAccessories. Scan these QR Codes Featured Video. Current Promotion
Current Promotion Scan these QR Codes Featured Video 211 TOOLJAW The Toolholder Clamp Champ Description BT30 Taper TOOLJAW BT35 Taper TOOLJAW BT40 Taper TOOLJAW BT45 Taper TOOLJAW BT50 Taper TOOLJAW CT30
More informationSAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500
SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationCOFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock
Deburring Tool for Elliptical or Contoured Surfaces increased performance from stock Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 The HEULE COFA deburring tool removes burrs from the front and
More informationTRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or
More informationChapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
More informationI 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.
ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationThe Ensat self-tapping threaded insert...
The nsat self-tapping threaded insert... nsat is a self-tapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationSnappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
More informationROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More information2014 Promotional Products
2014 Promotional Products 1 2 + 1 2 Asimeto delivers the Value Plus 12+12 Warranty Program to guarantee the accuracy and reliability of all products. Simply visit Asimeto.com and register your tool(s)
More informationTHE PROCESS OF PRODUCING P-5678 SPRING PINS FOR NORTHLAND TRUCKS
THE PROCESS OF PRODUCING P-5678 SPRING PINS FOR NORTHLAND TRUCKS Prepared For Don Klepp, English 132 Instructor Okanagan University College By Richard Pelletier Mechanical Engineering Technology 1 Okanagan
More informationmm 0.8 mm 28 mm mm 0.8 mm 38 mm
Top Mounted s BESTEST indicators with top mounted dials are supplied with a rectangular bar, swivel clamp, contact point wrench and a certificate of accuracy and traceability in a fitted case. Contact
More informationPrecision Square SERIES 916. Precision Dial Square SERIES 7. Spring Dividers and Calipers SERIES 950 SPECIFICATIONS
Precision Square SERIES 916 Three types of square are available. All edges are hardened and precision ground. 916-402 with stand 916-213 Standard type 916-102 Beveled-edge type Size (H x W) Order No. Remarks
More information