Features. Special forms are possible

Size: px

Start display at page:

Download "Features. Special forms are possible"

Laurel Bryan
5 years ago
Views:

Features World s first indexable center drill Shortens set up and center drilling time Increases tool life and reduces tooling costs High Speed, High Feed Rate The special ground insert and rigid

1 Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your process performance. Features World s first indexable center drill Shortens set up and center drilling time Increases tool life and reduces tooling costs High Speed, High Feed Rate The special ground insert and rigid holder design facilitate high performance speed and feed rates. For example, drilling alloy steel at 6 rpm and feed rate of 6 mm/min. (.1 mm/rev.) Easy Tool Length Setting The axial position accuracy of the insert is.5 mm (.2 ). It is not necessary to reset the tool length when changing the insert or cutting edge. Excellent Repeatability The positioning repeatability of the insert is within.2 mm (.8 ) in radial direction, thus ensuring conformity to any national standards. High pressure coolant can be supplied through center directly to tip of center drill insert. Extended Tool Life Coolant can be supplied through the center of the holder to increase performance and extend tool life. Insert geometry, grades and coating process are specifically engineered for centering applications. Special forms are possible 37

Standard stock item * * DIN 332 Form R Ø1.~Ø1 Insert Type: * DIN 332 Form A+B Ø1.~Ø1 * NC233 / K2F grade TiAIN FUDURA NANO COATING. * NC574 / P4 grade Helica coating, for 8 inserts.

2 Standard stock item * * DIN 332 Form R Ø1.~Ø1 Insert Type: * DIN 332 Form A+B Ø1.~Ø1 * NC233 / K2F grade TiAIN FUDURA NANO COATING. * NC574 / P4 grade Helica coating, for 8 inserts. * DIN 332 Form A Ø2.~Ø2.5 * ANSI 6 #2.~#1 PR (Similar DIN332 R) C Type Excellent repeatability by insert type. No need tool length re-setting while changing insert or cutting edge. F Type 38

3 Indexable Center Drill R DIN332 Form R DIN332 Form A+B 12 d2 d1 12 d3 d2 d1 L1 L2 CT L1 L2 L3 CT DIN332 Form R >> Code Parts No. Coating Grade d1 d2 L1 L2 R CT ± I9MT8T1R1-NC I9MT8T1R125-NC Helica P I9MT8T1R16-NC I9MT8T1R2-NC I9MT12T2R2-NC233 I9MT12T2R25-NC I9MT12T2R315-NC I9MT163R4-NC TiAlN K2F I9MT163R5-NC I9MT24R63-NC I9MT24R8-NC I9MT256R1-NC DIN332 Form A+B >> Code Parts No. Coating Grade d1 d2 d3 L1 L2 L3 CT ± I9MT8T1B1-NC I9MT8T1B125-NC Helica P I9MT8T1B16-NC I9MT8T1B2-NC I9MT12T2B2-NC233 I9MT12T2B25-NC I9MT12T2B315-NC I9MT163B4-NC TiAlN K2F I9MT163B5-NC I9MT24B63-NC I9MT24B8-NC I9MT256B1-NC Nine9 Cutting Tool & Tool Holders

4 DIN332 Form A 12 d3 d2 d1 ANSI d2 d1 L1 L2 L3 CT L1 L2 CT DIN332 Form A >> Code Parts No. Grade Coating d1 d2 d3 L1 L2 L3 CT ± I9MT8T1A2-NC I9MT8T1A25-NC574 P4 Helica I9MT8T1A315-NC ANSI 6 >> Code Parts No. Grade Coating Size d1 d2 L1 L2 CT mm mm mm mm ± I9MT12T2A2-NC233 #2 5/ / / I9MT12T2A3-NC233 #3 7/ / / I9MT12T2A4-NC233 #4 1/ / / I9MT163A5-NC233 #5 3/ / / K2F TiAlN 3511 I9MT24A6-NC233 #6 7/ / / I9MT24A7-NC233 #7 1/ / / I9MT24A8-NC233 #8 5/ / / I9MT256A1-NC233 #1 3/ / Holder >> Made of hardened high alloy steel. Shank is ground to h6 tolerance. Special holders are available on request. ØD ød L2 L1 Code Parts No. Type ød L1 L2 ød Screw Key F BC1-8F F SB16-12F F SB16-16F F SB2-2F F SB25-25F NS Nm NS Nm NS Nm NS Nm NS Nm NK-T7 NK-T9 NK-T15 NK-T2 NK-T2 Code Parts No. Type ød L1 L2 ød Screw Key /8F BC3/8"-8F 8 3/8" /8F SB5/8"-12F 12 5/8" /8F SB5/8"-16F 16 5/8" /4F SB3/4"-2F 2 3/4" F SB 1"-25F 25 1" NS Nm NS Nm NS Nm NS Nm NS Nm NK-T7 NK-T9 NK-T15 NK-T2 NK-T2 Nine9 Cutting Tool & Tool Holders 4

PR N9MT11T3PR Radius Center Drilling 6 Ancient Now & Future NC4 Inserts >> Create 6 center holes SIMILAR to DIN 332 Form R. Carbide insert can stand very long tool life.

Radius curve eliminates the sharp transition from drill point to countersink angle. Each insert has 2 cutting edges. Code Parts No. Coating Grade Dimensions d1 d2 L1 L2 L1 L2 1425 N9MT11T3PR2-NC4 2.

5 PR N9MT11T3PR Radius Center Drilling 6 Ancient Now & Future NC4 Inserts >> Create 6 center holes SIMILAR to DIN 332 Form R. Carbide insert can stand very long tool life. Easy tool length setting, saving tool changing time. d2 d1 NC4: Universal grade for all unhardened steel and cast iron. Radius curve eliminates the sharp transition from drill point to countersink angle. Each insert has 2 cutting edges. Code Parts No. Coating Grade Dimensions d1 d2 L1 L2 L1 L N9MT11T3PR2-NC N9MT11T3PR25-NC4 TiN P N9MT11T3PR3-NC Holder >> PR holder has small offset value. Also apply as a 9 spotting drill while fitted with N9MT11T3CT2T-H insert (page 21). Ø16 ød L Code Parts No. Ød L Screw Key 644PR PR 16 1 NS Nm NK-T15 Turning and Centering Capacity on CNC Lathes max Action 1 Center Drilling 2 Facing 3 Chamfering 4 External Turning PR Insert >> Radius Center Drilling Center Drilling Work Material Vc (m/min) f (mm/rev.) Grade of Insert 6 Carbon Steel Alloy steel High alloy steel NC4 Cast iron Nine9 Cutting Tool & Tool Holders

Performance Profit by making the right choice >> High speed and feed rate reduce cutting time. The unique design increases tool life and reduces change over time. CT CT±.

6 Performance Profit by making the right choice >> High speed and feed rate reduce cutting time. The unique design increases tool life and reduces change over time. CT CT±.25 CT 2 cutting edges 2 cutting flutes design Comparison >> Workpiece : Low carbon alloy steel, 85 N/mm 2 Machine: VMC BT4 with internal coolant Diameter of tool : Ø3.15 mm Depth of drilling : 7.2 mm Comparison HSS Center Drill ( TiN Coating ) Solid Carbide Center Drill Cutting speed m/min Spindle speed r.p.m Feed rate f = mm/rev Feed rate F= mm/min Coolant Emulsion External / Internal External External Drilling time sec Holes of drilling per edge Tool Ex: 2, holes, total drilling time HSS Center Drill 33 Hours 694 Hours 33 Hours Solid Carbide Center Drill Tool 36 Hours Hour Ex: 2, holes, total tool length setup time HSS Center Drill 29 min. 855 min. 29 min. Solid Carbide Center Drill 12 min. Surface finish >> Insert I9MT163B5 NC min. Material SCM44 Vc 6 m/min. S 38 r.p.m. f.1 mm/rev. F 38 mm/min. Ap 13.5 mm Nine9 Cutting Tool & Tool Holders 42

Also Available >> Special holder & Insert 25x25 square

99616- -L2525MF * For used on lathe 99616- -R2525MF 25 25

5 / 1, rpm) Left hand tool holder and Insert. (NC574.

7 Also Available >> Special holder & Insert 25x25 square shank holder >> Parts NO L2525MF * For used on lathe R2525MF mm Cylindrical Shank >> Pre-balanced (G2.5 / 1, rpm) Left hand tool holder and Insert. (NC574. NC233) Special insert. Combined centering, facing chamfering and external turning >> 43 Nine9 Cutting Tool & Tool Holders

8 Enquiry Form Company >> Challenge or improvement >> Center hole dimension >> Please provide workpiece drawing One of following type should be chosen. Type R The following information should be checked while discussing with customer. Machine Machine Type Spindle Speed Max. r.p.m. Power of Spindle motor KW HP Type A Coolant supply NO If yes, External Internal bar(psi) Current tool Cutting Speed HSS m/min. Solid Carbide SFM Type B Others Feed Rate mm/rev. inch/rev. Work Piece Material code Center hole type Other request R A B C Other as attached drawing Surface roughness Tolerance(see below) Type C Special Tool holder shank dimensions >> Special tool holder shank, please fill in D1 and L4. As attached drawing. Metric Inch Right Left Other Dimension Table A1 A2 A3 ød1 ød2 ød3 Dimension Tolerance Dimension Table L1 L2 L3 R ød1 L4 Dimension Tolerance h6 --- Nine9 Cutting Tool & Tool Holders 44

9 Technical Specifications 6 Center holes DIN 332 >> Form R, A and B b DIN332 Form R d1 d2 DIN332 Form A d1 d2 9 DIN332 Form B d1 d d3 t a t a t a STD DIN332 Form R ISO DIN332 Form A ISO DIN332 Form B ISO d1 d2 t a d2 t a d2 b d3 t a Advantage of Form R Center hole 6 Center of tail stock 9 Center of tail stock Center hole and center are misaligned Advantage of Form B center hole Avoid scar or distortion while transportation Burr Rough surface of workpiece Total solution 45 Nine9 Cutting Tool & Tool Holders

10 Applications Tip >> Various centering applications and products - shafts of engine, transmission gear, bearings, motors, grinding parts, spindles, gear reducers, cooling fan, universal joints... Special forms for other applications also available on request. Nine9 Cutting Tool & Tool Holders 46

11 Cutting Data Attention >> For d1< 4 mm or size #5, the center misalignment must be less than.5mm. If the CNC lathe turret center s misalignment is above.15mm, please use the Center Height Adjusting Sleeve. (See page 71) For low spindle speed special purpose machines or lathes, lower spindle speed is allowed but the feed rate should be maintained. ø1~ø3.15 (#2~#4) >> Workpiece material Carbon steel C<.3% Carbon steel C>.3% Low alloy steel C<.3% High alloy steel C>.3% Stainless Steel Cast iron Al, and non-ferrous metal f (mm/rev) 12 Ø1~1.25 Ø1.6~3.15 Ø2 (#2) Ø2.5 (#3) Ø3.15 (#4) (S=17825 rpm) (S=17825 rpm) (S=145 rpm) (S=12732 rpm).1-.2 (S=2546 rpm).3-.1 (S=15278 rpm) (S=38197 rpm) (S=1393 rpm) (S=1194 rpm) (S=195 rpm) (S=995 rpm) (S=1592 rpm).5-.2 (S=1194 rpm) (S=2985 rpm) (S=1114 rpm) (S=9549 rpm) (S=8753 rpm) (S=7957 rpm) (S=1592 rpm).1-.2 (S=9549 rpm) (S=23873 rpm) (S=8912 rpm) (S=7639 rpm) (S=72 rpm) (S=6366 rpm) (S=127 rpm) (S=7639 rpm) (S=1998 rpm) (S=773 rpm) (S=663 rpm) (S=5557 rpm) (S=552 rpm) (S=11 rpm) (S=663 rpm) (S=15157 rpm) Cutting fluid internal>5 bar dry ø4~ø1 (#5~#1) >> Workpiece material Carbon steel C<.3% Carbon steel C>.3% Low alloy steel C<.3% High alloy steel C>.3% Stainless Steel Cast iron Al, and non-ferrous metal Clamping of the insert f (mm/rev) Ø4 (#5) Ø5 (#6) Ø6.3 (#7) Ø8 (#8) Ø1 (#1) (S=557 rpm) (S=4774 rpm) (S=4376 rpm) (S=3978 rpm) (S=1194 rpm) (S=4774 rpm) (S=11936 rpm) (S=4456 rpm) (S=3819 rpm) (S=351 rpm) (S=3183 rpm) (S=955 rpm) (S=3819 rpm) (S=9549 rpm) (S=3536 rpm) (S=331 rpm) (S=2778 rpm) (S=2526 rpm) (S=758 rpm) (S=331 rpm) (S=7578 rpm) (S=2785 rpm) (S=2387 rpm) (S=2188 rpm) (S=1989 rpm) (S=597 rpm) (S=2387 rpm) (S=5968 rpm) (S=2228 rpm) (S=199 rpm) (S=175 rpm) (S=1591 rpm) (S=477 rpm) (S=199 rpm) (S=4774 rpm) Cutting fluid internal>5 bar dry Unscrew the insert Nine9 Cutting Tool & Tool Holders

Center Height Adjusting Sleeve Principle >> Designed for adjusting Center Height of center drills, NC spot drills, reamers and taps

Its center is inclined to the outer sleeve.

:-996-32H >> Type : SB32-IDER2 ø3~ ø13mm cutting tool ER2 coolant slot Adjusting range ±.15 mm ø34 ø3~13 15 ~ 156 8 ø32 h6 Parts No.

15 mm 9 95~11 4 h6 Applications >> Used when the CNC lathes need to adjust the center height.

12 Center Height Adjusting Sleeve Principle >> Designed for adjusting Center Height of center drills, NC spot drills, reamers and taps on the CNC lathes. The main body is made from two sleeves. The inner sleeve is to hold and lock the cutting tool. Its center is inclined to the outer sleeve. When the inner sleeve is pushed or pulled, the cutting tool s center height is adjusted to lower or higher position. Parts No.: H >> Type : SB32-IDER2 ø3~ ø13mm cutting tool ER2 coolant slot Adjusting range ±.15 mm ø34 ø3~13 15 ~ ø32 h6 Parts No.:-996-4H >> Type : SB32-ID16 Dust protection wiper ø16 mm cutting tool holder coolant slot Adjusting range ±.15 mm 9 95~11 4 h6 Applications >> Used when the CNC lathes need to adjust the center height. This sleeve can be clamped by VDI 4, VDI 5 E2 tool holders,and other type of internal turning tool holders. Center height adjusting range: ±.15 mm(.6 ). Total axial movement is 6mm(.236 ). Tightening screw 4mm Hex key Two set screws to hold the inner sleeve. Adjusting center height with 4 mm Hex key. 71

13 You will be interested to know the whole range of Nine9 tools.

Indexable Center Drill

i-center indexable center drill (patent pending) First Indexable center drill in the world. Shortens set up time and center drilling time. Increases tool life which reduces tooling cost. Special forms