Measuring and laying-out tools, gauges

Transcription

1 Measuring and laying-out tools, gauges Slide calipers Micrometer gauges Thread measuring wires Setting gauges Multi-purpose measuring devices Accessories Gauge blocks Gauges Gauge ball sets Flatness testers Measuring and plug gauges Keyway gauges Dial indicators and contact points Measuring probes and display units Depth gauges Outside and inside measuring instruments Roughness testers Physical measuring instruments Indicator supports Magnetic holders Indicator stands Bases for indicator stands Measuring tables Measuring base and reference plates Vernier height gauges Multi-coordinate measuring instruments CARFIT system Data recording instruments Connecting cables Laying-out tools Straight edges and angles clamping elements prism pairs and clamping prisms spacers Test and laying-out plates Laying-out dyes und finishing pastes Concentricity testers Bevel protractors Foil gauge strips Thickness gauge stocks Gauges and templates Thread tables ISO tolerance keys Inclinometers Spirit levels Laser systems Distance meters Scales Tension and compression meters Load cell manometers Stop watches Revolution counters Thickness measuring devices Hardness testers Magnification and observation devices Measuring rods, tape rules Batteries

2 Our suppliers for catalogue group 3: 0 f m JAQUET [ C L G ] Deumo e U Z e w - u N Ä : / r r - RUGOTEST O q < X TICOM 0 Impressive brand. Impressive tools.

3 of pocket slide calipers Measuring and laying-out tools, gauges External measurement Internal measurement Step or collar measurement Recess measurement Diameter measurement Centre point marking Depth measurement Depth measurement with depth measuring base Contact surfaces ground and finely lapped, with depth measurement rod. Scale and vernier lasered and with matt-chromed finish. Accuracy in compliance with DIN 862. Recessed and inch graduation. Graduation 0,05 and 1/128 inch, thread table on reverse side, in case. Precision Pocket Slide Calipers For external, internal, depth and step or collar measuring Stainless steel, rod and slide hardened Locking screw on top Temporary lock Locking screw at bottom Measuring range Jaw length Graduation , , , Pocket slide calipers for left-handed people with locking screw, 4 measurements. Graduation 0,05 and 1/128 inch. Precision Pocket Slide Calipers for Left-Handed People Stainless steel, hardened Locking screw Measuring range Graduation , logistics more than high-quality tools there of customised items computerised management of approx items more than m 2 of storage space high-quality products from more than suppliers

4 Pocket slide calipers depth measuring stops cases for slide calipers Precision Pocket Slide Calipers 0 With round depth measurement rod Ø 1,8. Contact surfaces ground and finely lapped. Scale and vernier lasered and with matt-chromed finish. Accuracy in compliance with DIN 862. Recessed and inch graduation. Graduation 0,05 and 1/128 inch, with thread table on reverse side of caliper, in case. For external, internal, depth and step or collar measuring. Stainless steel, rod and slide hardened Temporary lock Locking screw Measuring range Jaw length Graduation , Depth Measuring Stops Stainless steel, hardened and ground For TESA digital pocket slide calipers (measuring range 150 ) and dial slide calipers (measuring range 150 ) For HHW and TESA vernier pocket slide calipers (measuring range 150 ), digital pocket slide calipers (measuring range 150, 200 and 300 ) and dial slide calipers (measuring range 150 ) Contact surface x x With parallax-free graduation, contact surfaces ground, with depth measurement rod. Scale and vernier with matt-chromed finish, accuracy in compliance with DIN 862, graduation 0,05 and 1/128 inch, thread table on reverse side, in case. Precision Pocket Slide Calipers For external, internal, depth and step or collar measuring. Stainless steel, hardened Temporary lock Locking screw Measuring range Jaw length Graduation , With parallax-free graduation, double prismguiding (1), contact surfaces ground and lapped, with depth measurement rod. Scale and vernier with matt-chromed finish, accuracy in compliance with DIN 862, graduation 0,05 and 1/128 inch, thread table on reverse side, in case. Precision Pocket Slide Calipers For external, internal, depth and step or collar measuring. Stainless steel, hardened (1) 31.4 Locking screw Measuring range Jaw length Graduation ,

5 31031 Slide Caliper Cases Slide caliper cases made of artificial leather, black. Without press stud. Measuring and laying-out tools, gauges For slide calipers measuring range With interface Proximity RS 232/USB. Measuring system resistant to dirt, water, and coolants. Protection class IP 67. Repeatability 0,01. Accuracy in compliance with DIN 862. Depth measuring rod (150 and 200 ) 4 x 1,3. Once zero point and measuring unit have been set they do not have to be set again unless the battery (3V, type CR 2032) is changed. Made for Digital Pocket Slide Calipers IP 67 long-term operation. Transmitting of measuring values, HOLD-function, display can be switched from metric to imperial, automatic and manual switch-off function. Additional -scale on the rod. Dimensions of rod 16 x 3. LC display, digit height 6. For external, internal, depth and step or collar measuring. Suitable for workshops (IP 67). Stainless steel, hardened and ground. Test gauge see cat.-no Connecting cable see cat.-no Spare batteries see cat.-no Measuring range Jaw length Resolution Proximity/ USB /20 0,01 x /20 0,01 x /24 0,01 x Digital Pocket Slide Calipers IP 40 0 With round depth measurement rod Ø 1,5. Accuracy in compliance with DIN 862. Protection class IP 40. With locking screw, without interface. On/off/functions, zero-setting in any position. Display in metric or imperial units. With Reference-Lock (locks the set limit value). Power safe function (auto-off after approx. 2 h). In case. For external, internal, depth and step or collar measuring. Test gauge see cat.-no Spare batteries see cat.-no Measuring range Jaw length Length of Resolution cross-over jaws , digimax Made of non-metal high tech material, 60 of which is fibreglass, therefore it is corrosion-proof, non-magnetic, has a very low heat conductance, and can act as an electrical insulator. Chemical-resistant, the contact surfaces are temperature-resistant from C. Contact surfaces will not damage delicate surfaces. With depth measurement rod. 5-digit LC-display, digit height 7,5, automatic switch-on/off, metric and imperial display. In accordance with CE standard, in case. Digital Pocket Slide Calipers For external, internal, depth and step or collar measuring. Test gauge see cat.-no Spare batteries see cat.-no Calibration not possible! Measuring range Resolution ,

6 Pocket slide calipers workshop slide calipers Digital Pocket Slide Calipers capa µ system m Modern, unconventional design, easy and flexible handling, highly resistant thanks to surface-treated light metal. Excellent movement of the slide, shock protection by means of internal slide guidance (patented). Big size number display (digit height 7 ) for quick and accurate reading, zero-setting in any position of measuring range. In compliance with DIN 862 (shape 1 AZ). Depth measurement rod Ø 1,8 (only measuring ranges 150 and 200 ), battery (3V, type CR 2032) made for long-term operation, protection class (CEI/IEC) IP40. Marked with reference length and individual serial number. Swiss made. In case with instruction manual and test report with declaration of conformity. For external, internal, depth and step or collar measuring. Especially suitable for measuring cutting materials, grinding materials, stone, and carbide blades. Body made of plastics, rod and slide made of light metal, stainless. Measuring arms made of stainless steel, steel parts of measuring arms TiN-coated, hardness HV 0,05. Round depth measurement rod (measuring ranges 150 and 200 only) made of hardened spring steel. Test gauge see cat.-no Spare batteries see cat.-no Depth Measuring Stops For measuring ranges 150 and Stop Measuring range Resolution A B C , , , Measuring range 150, incl. of test report with declaration of conformity. Digital Pocket Slide Calipers SHOP-CAL Measuring modes ABSOLUT (DIRECT) and/or DIFFERENZ (DIFFERENCE). Test gauge see cat.-no Spare batteries see cat.-no Measuring range Resolution , Measuring range 150, incl. of test report and declaration of conformity. Protection class: IP 67, with fine tuning and RS 232 interface. Digital Pocket Slide Calipers TESA-CAL IP 67 Test gauge see cat.-no Spare batteries see cat.-no Connecting cable see cat.-no Measuring range Resolution RS ,01 x Test report with declaration of conformity included. Protection class: IP 67, with fine-tuning. Digital Pocket Slide Calipers TESA-CAL IP 67 Test gauge see cat.-no Spare batteries see cat.-no Measuring range Resolution , , ,

7 31053 X With interface Opto RS 232, transmission of measured values, HOLD-function. Repeatability 0,01. Accuracy in compliance with DIN 862. LC-display, digit height 6, waterproof, protection class: IP 67. Ergonomic one-hand operation for on/off-switching, zero-setting, and switching display from to inch and v. v. Battery 3V, type CR 2032, for long-term operation. In case. Digital Pocket Slide Calipers IP Without depth measurement rod With round depth measurement rod. For external, internal, depth and step or collar measuring. Measuring range Jaw length Resolution Opto Depth measurement RS 232 rod ,01 x 4 x 1, ,01 x 4 x 1, ,01 x ,01 x Ø 1,5 204 Measuring and laying-out tools, gauges Stainless steel, hardened and ground. Test gauge see cat.-no Connecting cable see cat.-no Spare batteries see cat.-no Digital Pocket Slide Calipers With interface Opto RS 232 C, transmission of measured values, HOLD-function, depth measuring rod, fine-adjusting thumb roll. Repeatability 0,01. Accuracy in compliance with DIN 862. LC display, digit height 6. On/off-switch, zero-setting, display of or inch. Battery 1,5V, type SR 44, for long-term operation. In case. For external, internal, depth and step or collar measuring. Stainless steel, hardened and ground. Test gauge see cat.-no Spare batteries see cat.-no Measuring range Jaw length Resolution Opto RS 232 C ,01 x Digital pocket slide caliper for left-handed people For left-handed people, with interface Opto RS 232. Large LC display (digit height 11 ). Accuracy in compliance with DIN 862. Repeatability 0,01, error tolerance +/- 0,03. Flat depth gauge. Display of or inch, zero-setting in any position, on/off-switch. Battery included (1,5V, type SR 44). Stainless, hardened steel. Measuring jaws finely ground and lapped. Test gauge see cat.-no Connecting cable see cat.-no Spare batteries see cat.-no Measuring range Resolution , Contact surfaces and guideways finest ground. Scale and vernier matt chrome finish and highly accurately laser-marked. End of jaws stepped for measuring internal dimensions, bevelled knife-edge jaws for measuring in narrow areas. With secured locking screw on top and adjustable bronze slide key. Accuracy in compliance with DIN 862. Slightly recessed graduation avoids damage and abrasion. Graduation bottom 0,05, top 1/128 inch (500 without inch graduation). Precision Workshop Slide Calipers Stainless steel, fully hardened and ground Without knife-edge jaws, without fine adjustment With knife-edge jaws, without fine adjustment With knife-edge jaws, with fine adjustment w/o KEJ - w/o FA w KEJ - w/o FA w KEJ - w FA Measuring range Jaw length Graduation , , ,

8 Workshop slide callipers digital slide calipers With parallax-free graduation, contact surfaces finest ground, end of jaws stepped for inside measuring. With locking screw and adjustable sliding key. Accuracy in compliance with DIN 862. Graduation: top and bottom, for direct reading of outer and inner measuring values. Graduation: top and bottom 0,05 (vernier extended to 39 ). Vernier and scale highly accurate marked by laser, chrome finish. Precision Workshop Slide Calipers Stainless steel, hardened and ground With knife-edge jaws, without fine adjustment With knife-edge jaws, with fine adjustment w KEJ - w/o FA w KEJ - w/o FA Measuring range Jaw length Graduation , Precision Digital Workshop Slide Calipers Wear-resistant, capacitive measuring system, without mechanical transmission elements. Interface Opto RS digit LC display, digit height 6, display of or inch, zero-setting in any position, on/off-switch, HOLD-function, repeatability 0,01, accuracy in compliance with DIN 862 (measuring range ), accuracy in compliance with works norm (measuring range ). Battery 3V, type CR 2032, for long-term operation, can be switched off. In wooden case. For difference, comparison and tolerance measurements, without additional, complicated calculations. Stainless steel, guiding surface hardened and ground, contact surfaces inductively hardened and ground. Spare batteries see cat.-no Connecting cable see cat.-no Without knife-edge jaws, with fine adjustment With knife-edge jaws, without fine adjustment With knife-edge jaws, with fine adjustment. Ü w/o KEJ - w FA w KEJ - w/o FA w KEJ - w FA Measuring range Jaw length Min. inside Resolution Opto dim. RS ,01 x ,01 x ,01 x ,01 x ,01 x ,01 x Without knife-edge jaws, without fine adjustment. LCD display, digit height 8. Display of or inch, zero-setting in any position, on/off-switch. Precision digital slide calipers Measuring jaws made of stainless steel, left jaw adjustable, inside-measuring jaws 20. Measuring range up to 1000, in wooden case, above that in Softpack with drawer Measuring range Graduation Graduation Jaw length Weight in approx. g 500 0,01 0, ,01 0, ,01 0, ,01 0, ,01 0, ,01 0, ,01 0,

9 31120 With rounded contact surfaces for internal dimensions and knife-edge jaws. Protection class IP67. Measuring rod with incremental, magnetic graduation. Interface Opto RS digit LC-display, digit height 7, display of or inch, zero-setting in any position. On/off-switch, automatic switch to power-safe after 10 minutes, shut-off after 2 hours. Hold function. Accuracy in compliance with DIN 862. Operating temperature 10 C - 40 C, battery 3V, type CR 2032 for long-term operation. In wooden or plastic case with test report and declaration of conformity. Precision digital workshop slide calipers TESA IP67 For direct, difference, comparison and tolerance measurements, without additional, complicated calculations. Stainless steel, hardened. Further types available on request. Spare batteries see cat.-no Connecting cable see cat.-no Measuring range Dimensions A x B x C x 90 x x 150 x x 150 x With interface Opto RS 232, internal and external measurement with preset-function for both measuring types. Min/max-function, tolerance limit display. Repeatability 0,02. External measuring jaws length 150, made of hardened steel, titaniumcoated. Internal rotary pin length 18, made of carbide. Starting at a measuring range 1020 with adjustable and lockable left measuring jaw. Extremely Light Digital Workshop Slide Calipers Constant measuring force for external and internal measurements. The rod is made of aluminium, reinforced with two steel bars, hardened and ground. This ensures perfect guiding of the slide and its protection against shocks. LC display with a digit height of 8,5. Battery (3V, type CR 2032), for long-term operation. Low weight for easy handling and high measuring accuracy. Measuring range Error tolerance Weight Opto A B kg RS ,03 1,1 x ,04 1,3 x ,06 1,6 x ,12 2,0 x ,15 2,3 x ,20 2,6 x ,25 3,0 x 207 Measuring and laying-out tools, gauges Test gauge see cat.-no Connecting cable see cat.-no Spare batteries see cat.-no Accessories available on request Highest precision, end of jaws stepped for inside measuring. Jaws hardened, locking screw, accuracy in compliance with DIN 862. Graduation:. Special steel. Large Workshop Slide Calipers All slide calipers are also available chrome-plated for corrosion resistance. Further slide calipers with a measuring range of up to 5000 as well as larger jaw lengths available on request Without knife-edge jaws, without fine adjustment With knife-edge jaws, without fine adjustment Without knife-edge jaws, with fine adjustment With knife-edge jaws, with fine adjustment w/o KEJ - w/o FA w KEJ - w/o FA w/o KEJ - w FA w KEJ - w FA Measuring range Jaw length Graduation , , , , , , ,

10 Slide calipers with round scale multi-purpose slide calipers slide calipers for grooves laying-out slide calipers With cross-over jaws. Slanting jaw ends for thread core measuring. Depth measurement rod, fine-adjusting thumb roll and locking screw. Dial face with clear graduation and easily readable scale, mattchrome finish setting ring, zero point adjustable and lockable. Scale lasered and with matt-chromed finish, shock-proof. Accuracy in compliance with DIN 862, in case. Slide Calipers With Round Scale (Dial Slide Calipers) For external, internal, depth and step or collar measuring. Stainless steel, hardened. Cat.-no One pointer revolution = 1 in order to avoid reading errors. Test gauge see cat.-no Measuring range Jaw length Graduation 1 pointer revolution , , , , Slide Calipers With Round Scale (Dial Slide Calipers) Turning dial face with locking screw, patented shock protection, high precision thanks to hardened and ground measuring toothed bar, accuracy in compliance with DIN 862, in case with test report and declaration of conformity. For external, internal, depth and step or collar measuring. Stainless steel, hardened. Test gauge see cat.-no U One pointer revolution = 1 in order to avoid reading errors One pointer revolution = 1 in order to avoid reading errors Measuring range Jaw length Graduation 1 pointer revolution , , , , , Multi-Purpose Slide Calipers Multipré With moving transverse jaw with graduation. Open slide with locking screw. Vernier 1/20 (measuring range 250 and 1/128 inch). Accuracy in compliance with DIN 862. In case. For external, internal, depth and step or collar measuring, can be used as tool setting gauge. Laying-out accessories included (measuring jaws, laying-out jaw, bracket, rotary pins), for measuring distances between boreholes and recesses. Stainless steel, hardened, matt-chrome finish. Accessories available on request Measuring range Jaw length Graduation ,

11 With offset cross-over inside gauging jaws. Contact surfaces hardened and finely ground. Scale and vernier matt chrome finish. Recessed graduation on measuring rail. Main graduation and vernier highly accurately laser-marked. Slide with locking screw and adjustable phosphor bronze sliding spring. Accuracy in compliance with works norm. Precision Slide Calipers for Internal Circlip Grooves I I For measuring internal circlip grooves in boreholes. Stainless steel. Measuring and laying-out tools, gauges Measuring range Jaw length Graduation Offset Rod Dia. ï Total length B l C x A ,05 3 x 0,9 16 x 3, ,05 5 x 2,0 16 x 3, ,05 7 x 3,0 20 x 5, ,05 10 x 5,0 20 x 5, A C B Digital Precision Slide Calipers for Internal Circlip Grooves With interface Opto RS 232, offset cross-over inside gauging jaws, on/off-switch, zero-setting in any position, display of or inch, HOLD-function (measured value default setting), PRESET (measured value preset). Accuracy in compliance with works norm, precision mechanic, capacitive measuring system. Battery 3V, type CR In wooden case. For measuring internal circlip grooves in boreholes. Stainless steel. Connecting cable see cat.-no Spare batteries see cat.-no A C B Measuring range Jaw length Graduation Offset Beam Total length Opto B I C x A ï RS ,01 3,0 x 0,9 16 x x ,01 5,0 x 2,0 16 x x Multi-purpose slide caliper set, digital 0 Especially manufactured slide caliper for measuring differently-shaped workpieces. Can be customised thanks to exchangeable contact points and extensions of dial indicators. Suitable for internal and external measurements. With locking screw. For measuring tips with M 2,5 thread. Zero-setting in any position. Accuracy in compliance with DIN 862, display of or inch. HOLD function (data storage). Preset function (measured value preset). Storage for 2 limit values, with interface RS 232. Battery (3 V lithium, type 2032). Scope of supply: Slide calipers, contact points, batteries, case. Contact points see cat.-no Connecting cable see cat.-no Spare batteries see cat.-no Measuring range Graduation Length of measuring blade Internal dimension less or equal to 300 0, , Laying-Out Slide Calipers With locking screw. Graduation:, on bar and slide. Graduation 0,05 (vernier extended to 39 ). Hardened laying-out slide Measuring range Graduation Laying-out slide , , , ,

12 3 and 5-point measuring slide calipers depth measuring slide calipers measuring bases Precision-3-and 5-Point Measuring Slide Calipers Parallax-free reading with graduation in and inch, matt chrome finish. Graduation 0,05 (vernier extended to 39 ). For measuring diameters of milling cutters, reamers, taps, splined shafts, toothed gears etc. Stainless steel For 3-cutting edge tools For 5-cutting edge tools For measuring range Ø Precision Depth Measuring Slide Calipers Vernier and scale lasered and with matt-chromed finish, graduation in. Rule fully hardened, with exchangeable hardened rotary pin and one-sided graduation. Contact surfaces hardened. Accuracy in compliance with DIN 862. In case. For measuring small and offset boreholes. Stainless steel. 5 ø Measuring range Base span Beam ï Graduation x 3 0, Precision Depth Measuring Slide Calipers Graduation:. Contact surfaces inductively hardened. With locking screw. Scale and vernier lasered and with matt-chromed finish. Stainless steel Accuracy in compliance with DIN 862. Graduation on both sides allows exchange of the rule. Rule fully hardened, with exchangeable, hardened rotary pin. Ø of rotary pin: 1,5 (with rule 8 x 3 ) and 2,0 (with rule 12 x 4 ) Accuracy in compliance with DIN 862. With straight, bevelled measuring beam Accuracy in compliance with DIN 862. Graduation on both sides allows exchange of the rule. Length x width of offset beam: 12,5 x 5 for boreholes starting at Ø 22 (with rule 8 x 3 ) and 16 x 10 for boreholes starting at Ø 28 (with rule 12 x 4 ) Accuracy in compliance with works norm. Graduation on both sides allows exchange of the rule. Rectangularly offset double stepped measuring beam for width and distance measurements in holes or slots with a diameter starting at , , Measuring range Base span Beam Graduation ï x 3 0, x 3 0, x 4 0, x 4 0, x 4 0, x 5 0,

13 31300 With rotatable stop plate. Graduation 0,05. Accuracy in compliance with DIN 862. Scale background matt chrome-plated, main graduation recessed against wear. In plastic case with test report and declaration of conformity. Precision Depth Measuring Slide Calipers Stainless, hardened steel. Measuring bases see cat.-no Measuring and laying-out tools, gauges Measuring range vernier A B C D top 150 0, , , , , , With rotatable stop plate. Protection class IP 67. Measuring rod with incremental, magnetic graduation. Interface Opto RS digit LC-display, digit height 7, display of or inch, zero-setting in any position. On/off-switch, automatic switch to power-safe after 10 minutes, shut-off after 2 hours. HOLD function. Accuracy in compliance with DIN 862. Operating temperature 10 C - 40 C, battery 3V, type CR 2032 for long-term operation. In wooden or plastic case with test report and declaration of conformity. Digital depth measuring slide calipers IP 67 Further types available on request. Measuring bases see cat.-no Spare batteries see cat.-no Connecting cable see cat.-no Measuring range A B , , , In compliance with works norm, with declaration of conformity. Delivery with fastening material. Mount-on measuring bases For depth measuring slide calipers cat.-no and A B C max. error µm X With interface Opto RS 232. Transmission of measuring values, HOLD-function, display of or inch on/off switch. With straight, bevelled measuring beam. Accuracy in compliance with DIN 862. Battery (3V, type CR 2032) for long-term operation. In case. For measuring depth and distance. Digital Depth Measuring Slide Calipers Connecting cable see cat.-no Spare batteries see cat.-no Measuring range Base Error tolerance Resolution Opto length RS ,04 0,01 x ,05 0,01 x

14 Depth measuring slide calipers mount-on measuring rods measuring tool sets micrometer gauges Digital Depth Measuring Slide Calipers Wear-resistant, capacitive measuring system, without mechanical transmission elements. With interface Opto RS digit LC-display, digit height 6, display of or inch, zero-setting in any position, HOLD-function, on/off-switch. Repeatability 0,01. Battery 3V, type CR 2032, for long-term operation, can be switched off. In wooden case. For direct, difference, comparison and tolerance measurements, without additional, complicated calculations. Stainless steel. Guiding surfaces hardened and ground, contact surfaces inductive hardened and ground. Connecting cable see cat.-no Spare batteries see cat.-no With rectangularly offset measuring beam. Accuracy in compliance with DIN 862. For measuring recesses, e.g. in holes (from Ø 28 ) and steps With straight, bevelled measuring beam. Accuracy in compliance with DIN 862. For measuring depths and distances Measuring beam stepped on both sides. Accuracy in compliance with works norm. For width and distance measurements, slots and recesses in holes starting at Ø of Measuring range Base Resolution Opto span RS ,01 x ,01 x ,01 x Digital Depth Measuring Slide Calipers 0 With 3 exchangeable measuring tips, high-contrast LC-display, digit height 7.5, interface multi- COM (optional: RS 232, USB or Digimatic). Special measuring tip for measuring keyway gaps and widths. Accuracy in compliance with DIN 862. ON/OFF functions, zero-setting in any position. Display of or inch, PRESET function (measured value preset), reversal of counting direction (+/-) for differential measurements. With power safe function for automatic shutdown after approx. 2 hours. Battery type CR 2032 for long-term operation. In case. Spare batteries see cat.-no Connecting cable see cat.-no Measuring range Resolution Base depth measurement rod span Ø 100 0, With data output Opto RS 232 C and direct digital reading. The bar ends are equipped with mounting slots. Sliding plate on the back of the bar. LC-display: 5 digits, digit height 6. +/- preset-function (for measured value), display of or inch, zerosetting in any position, HOLD-function (storage of measured value), on/off-switch. Battery 1,5V, type SR 44, included. Digital Mount-On Measuring Rods For all movement measurements with coordinate measuring tables on machine tools, woodworking machines and measuring machines. Bar made of stainless, hardened steel. Hardness 53 HRC. Further measuring ranges and vertical types available on request. Spare batteries see cat.-no Connecting cable see cat.-no Measuring range Resolution Opto (x) RS 232 C 150 0,01 x ,01 x ,01 x 203

15 In wooden case Standard measuring instrument set 2-part, containing: 1 pocket slide caliper 150 (cat.-no ), 1 micrometer gauge 0-25 (cat.-no ) Wooden box, empty, for cat.-no Measuring Instrument Sets Large measuring instrument set 6-part, containing: 1 pocket slide caliper 150 (cat.-no ), 1 precision micrometer gauge 0-25 (cat.-no ), 1 measuring rod 200 (cat.-no ), 1 flat steel square 100 x 70, (cat.-no ), 1 knife-edged straight edge 100 (cat.-no ), 1 bow spring divider 125 (cat.-no ) Wooden box, empty, for cat.-no Measuring and laying-out tools, gauges part 6-part Measuring instrument sets Wooden box Contact surfaces carbide-equipped, plane-parallel ground and lapped. Scale parts matt chrome finish, spindle fully hardened and ground. With locking lever, adjusting nut and ratchet. Accuracy in compliance with DIN 863. Insulated against body heat. Graduation 0,01, spindle pitch 0,5, measuring spindle Ø 6,5, measuring drum Ø 18. Wrenches and setting gauges included with set and single tools, in storage box. For outside measurements. Precision Micrometer Gauges Set Storage box, empty Measuring range 1 ea. micrometer gauge / / / ATORN / / / / / HHW single Measuring range ATORN ATORN ATORN 103 single Measuring range ATORN HHW HHW

16 Micrometer gauges Precision Micrometer Gauges 50 measuring range, carbide-equipped contact surfaces, plane-parallel lapped. Spindle thread hardened and ground, accuracy exceeds DIN 863. Zero-setting and thimble adjustable, clamping ring for spindle locking, coupling (ratchet) ensures constant measuring pressure, reading parts dazzle-free and matt chromed finish. Reading without addition by 1 thread pitch and 100-graduation (errors in measurements of 0,5 will not arise). Scale thimble 24 Ø, graduation 0,65, graduation 0,01. Delivery with conformity declaration, in wooden case. Especially suitable for accurate measuring on machine tools as well as for general workshop use. For grinding machines, for cast iron works and longterm usage With semicircular, solid frame, made of high quality spheroidal cast iron, special effect varnished. Spindle and contact surfaces 8 Ø With semicircular frame made of light metal, special effect varnished. Spindle and contact surfaces 10 Ø Setting gauges see cat.-no Measuring range max. error µm Measuring range max. error µm Precision Micrometer Gauges Precision Micrometer Gauges Carbide-equipped extension 50, with thread attachment, lapped to length of gauge block, included. This extension doubles the measuring range of the spindle (adjustable by 50 ). 0,01-reading without addition by 1 thread pitch and 100-graduation. Ideal for large measuring ranges. Spindle 10 Ø, contact surfaces made of carbide. Scale drum 24 Ø. Accuracy exceeds DIN 863. Stable frame made of light metal. With clamping device and friction coupling. Wooden case not included. Easy attachment and removal of extension. Much easier handling with greater measuring accuracy when compared to micrometer gauges with exchangeable anvil inserts. Setting gauges see cat.-no Wooden cases for precision micrometer gauges micrometer gauges Measuring range max. error µm Wooden cases For micrometer gauges with measuring range

17 ISOMASTER Display of full and half millimeters by means of graduation on scale sleeve, 1/100 graduation on scale drum with 50 graduation marks. By reversing the measuring force delimiter (integrated in the scale drum) the friction can be neutralised. Contact surfaces carbide-equipped. Accuracy in compliance with DIN 863 Part 1. Graduation 0,01, spindle pitch 0,5, measuring spindle Ø 6,5 (measuring range 0-100) and 8,0 (measuring range ). Test report with declaration of conformity. Marked with individual serial number. Swiss made, in case. For outside measurements. Precision Micrometer Gauges Spindle locking by a clamping ring guarantees high accuracy. Setting gauges see cat.-no Set consists of: 1 ea. precision micrometer gauge measuring range 0-25, 25-50, 50-75, Micrometer gauges, single. Measuring and laying-out tools, gauges Set Measuring range single Measuring range single Measuring range High-quality brand to satisfy highest requirements Innovative tools High availability Vast range of products Strict quality control 0 Impressive brand. Impressive tools

18 Micrometer gauges indicator micrometer gauges setting gauges TESAMASTER With very low deviation in measurements. Mechanical counter for 0,1, reading errors of 0,5 do not arise. 0,001 are shown parallax-free by using a vernier on a ball bearing sleeve. Friction coupling at the end of measuring spindle. A cord ring at the scale drum allows one-hand measurements without measuring force delimiter. Measuring force max. 10 N. Graduation 0,001 by means of vernier, parallax-free. Pitch of measuring thread 0,5. Contact surface Ø: 6,5 (measuring range Precision Micrometer Gauges ), 8 (measuring range ) accuracy approx. 50 better than required by standard norm. In case with 2 setting wrenches and test report with declaration of conformity. Marked with individual serial number. Accuracy in compliance with DIN 863/1. For outside measurements. Contact surfaces carbide-equipped. Setting gauges see cat.-no measuring range max. deviation max. parallelism clamping f max µm divergences µm , , , ,5 204 Measuring range max. deviation max. parallelism clamping f max µm divergences µm , , , , Precision Indicator Micrometer Gauges 0 Contact surfaces carbide-equipped and precision lapped, measuring drum and measuring sleeve with matt-chrome finish, frame fully matt chrome finished, heat transmission protection by plastic insulating sleeves. Accuracy in compliance with DIN 863, spindle pitch 0,5, measuring spindle Ø 8, measuring drum Ø 20, relieve stroke of measuring pin approx. 2,5. Micrometer gauge range 25. Precision dial indicator accuracy in compliance with DIN 879. In case, with declaration of conformity. 1) moving anvil 2) precision dial indicator with adjustable tolerance markers 3) lever for raising the anvil For absolute and difference measurements. Ideal for serial inspection of small precision parts. Larger measuring ranges and micrometers with indication range +/- 140 µm and graduation 2 µm availabe on request. Setting gauges see cat.-no measuring range error tolerance error tolerance head graduation graduation micrometer gauges precision dial indicator precision dial indicator precision dial indicator ,004 0,001 +/- 0,07 0, ,004 0,001 +/- 0,07 0, ,004 0,002 +/- 0,14 0, X Digital micrometer gauges S_Mike PRO, single Water and coolant-proof in compliance with IP 67. Smart inductive sensor: - automatic initiation of power-safe mode - storage of original value - automatic switch-on when measuring spindle is moved Non-revolving measuring spindle Ø 6,5 with quick adjustment and ratchet of 12 /revolution. New, contactless interface S_Connect Proximity. Measuring force adjustable: 5N/10N. Digital micrometer gauges IP Digital micrometer gauges S_Mike PRO, set 3-part, measuring range Consists of 3 micrometer gauges: 0-30, 30-66, Spare batteries see cat.-no Connecting cable see cat.-no Measuring range Error tolerance Repeatability A B C D E F µm µm ,5 27, , ,5 43, , ,5 60, , set

19 MICROMASTER Advantages of this innovation: - Easy handling thanks to ergonomic design, - Latest TESA technology, the patented capa µ system, - Big LC display (digit height 7 ), - Measuring range 0-30 with 20 more capacity, - Absolute control of measuring force by friction coupling, - Comfortable one-hand operation thanks to locked measuring drum, - PRESET, difference measuring and HOLDfunction. Technical specifications: Numerical interval 0,001 / inch, display of or inch, measuring spindle Ø 6,5, carbide measuring faces, measuring force max. 10 N, zerosetting in any position, accuracy in compliance with DIN 863/1. Automatic switch-off. Battery (3V, type CR 2032) for long-term operation. In case, batteries, instruction manual and test report with declaration of conformity included. Up to a measuring range of 100 with SCS test certificate. Precision Digital Micrometer Gauges capa µ system For outside measurements. Setting gauges see cat.-no Connecting cable see cat.-no Spare batteries see cat.-no Protection class IP Humidity-resistant in compliance with protection class IP Humidity-resistant in compliance with protection class IP 54 and with interface Opto RS 232. In case of using a measured value printer (e.g. TESA SPC printer, cat.-no ), protection class is IP 40. Measuring and laying-out tools, gauges Standard Protection class IP 54 Opto RS 232 Measuring range Standard Protection class IP 54 Opto RS 232 Measuring range Metric Setting Gauges Contact surfaces plane-parallel lapped, parallelism 1µ. Ø 6,5 up to 275, Ø 10 starting at 300. Accuracy in compliance with DIN 863 (js2) up to 175, exceeds DIN 863 starting at 200. With insulating handle and ID-number. For precision micrometer gauges with 2 flat and parallel positioned contact surfaces. Contact surfaces made of steel, hardened and aged. Other lengths in steps of 25 up to 1500 can be supplied within a short time. Special lengths and sets in cases available on request Length max. error /- µm 25 1, , , , , , , , , , Length max. error /- µm 550 3, , , , , , , , , ,

20 Thread measuring wires micrometer gauges thread measuring points setting gauges micrometer gauge stands Thread Measuring Wires For regular micrometer gauges with a spindle of Ø 6,5 and 8. For outside measurements of threads following the three wire-method for workpieces and thread plug gauges. The nominal flank Ø d2 can be determined by the calculated nominal test size M or by help of size tables. In pairs, in case Ø 6,5 Ø 8 Wire Ø Metric ISO thread Whitworth pipe thread d D for pitches for threads per inch 0,17 0,25 / 0, ,22 0, ,25 0, ,29 0,45 / 0, ,335 0,6 48 / ,455 0,7 / 0,75 / 0, ,53 0,9 32 / ,62 1,0 26 / ,725 1,25 22 / 20 / ,895 1,5 18 / ,1 1, ,35 2,0 12 / ,65 2,5 10 / ,05 3,0 / 3,5 8 / ,55 4,0 / 4, ,2 5,0 / 5,5 5 / 4, Laterally adjustable holder at the anvil side for measuring tips with prism contact surfaces, fine adjustment by thread and locking device. Holder for pointed measuring tips at side of measuring spindle. Frame made of high-quality malleable castiron, special effect varnished, with heat transmission protection. Spindle thread hardened and ground, spindle nut adjustable. With clamping ring and friction coupling (ratchet). Reading parts dazzlefree matt-chromed finish. Graduation 0,01, spindle pitch 0,5, scale drum Ø 20, accuracy exceeds DIN 863. In case with setting wrench and conformity declaration. Precision Micrometer Gauges For measuring the pitch diameter of male threads by means of exchangeable thread measuring points cat.-no and Precision micrometer gauges for internal thread measurements available on request. Thread measuring points and setting gauges see cat.-no Measuring range max. error µm Thread Measuring Points for Metric ISO-Threads Ground, clamping shank with Ø 3,5, length 15,5. In pairs (point and notch). Setting by means of setting gauges cat.-no For 60 male thread (metric ISO-thread). For measuring the pitch diameter of male threads (not to be used for internal thread measurements). For precision micrometer gauge cat.-no Hardened steel, ground Pitch ,4-0, ,5-0, ,6-0, ,0-1, ,5-2,0 207 Pitch ,0-2, ,0-4, ,0-5, ,0-6,

21 31589 Setting Gauges for Metric ISO Threads Measuring and laying-out tools, gauges Precision ground and lapped, with heat transmission protection. Accuracy in compliance with DIN 863, Part 3, shape D 18, +/- 3 µm. Round and lapped hole on one end on the pointed tip for easy mounting. Length For 60 male thread (metric ISO thread). For precision micrometer gauge cat.-no Hardened steel Thread Measuring Points for Whitworth Threads Ground, clamping shank with Ø 3,5, length 15,5. In pairs (point and notch). Setting by means of setting gauges cat.-no For 55 male threads (Whitworth thread). For measuring the pitch diameter of male threads (not to be used for internal thread measurements). For precision micrometer gauge cat.-no Hardened steel, ground. Thread measuring points and setting gauges for 30 trapezoidal threads available on request turns per inch turns per inch turns per inch 7-4, , Setting Gauges for Whitworth Threads Precision ground and lapped, with heat transmission protection. Accuracy in compliance with DIN 863, Part 3, shape D18, +/- 3µm. Length Round and lapped hole on one end on the pointed tip for easy mounting. For 55 male threads (Whitworth thread). For precision micrometer gauge cat.-no Hardened steel Micrometer Gauge Stands Stable cast iron base. Clamping jaws adjustable in incline position Ensures stable stand for fixed precision micrometer gauges up to capacities of 100. For mounting precision micrometer gauges for outside measurements, if the micrometers are used as a desk top measuring instrument With small measuring spindle Ø 2. Display of full and half millimeters by means of graduation on scale sleeve, 1/100 graduation on scale drum with 50 graduation marks. With clamping ring and friction coupling. Measuring inserts carbideequipped, 5 long, firmly inserted. Graduation 0,01, spindle pitch 0,5, accuracy exceeds Precision Micrometer Gauges DIN 863, with setting wrench and conformity declaration. For measuring recesses, feather grooves, splined shafts and other difficult to reach locations. Setting gauges see cat.-no Measuring range

22 Micrometer gauges setting reference pieces With non-revolving spindle. Reading parts dazzlefree matt-chromed finish. Friction coupler allows continious measuring pressure. Frame made of high-quality malleable cast iron and/or spheroidal cast iron, special effect varnished, with heat transmission protection. Graduation 0,01, contact surface Ø 8, spindle pitch 0,5, scale Precision Micrometer Gauges drum Ø 20, accuracy exceeds DIN 863. In case with setting wrench and conformity declaration. For measuring narrow recesses, e.g. for circlip rings. For measuring spring wire diameters. Setting gauges see cat.-no Measuring range Contact surface max. error W x D µm ,4 x ,4 x plane-parallel lapped measuring discs fully plane without indentations, scale sleeve and scale drum with matt-chrome finish, friction coupling, spindle locking with locking lever. Accuracy exceeds DIN 863. Spindle pitch 0,5, graduation 0,01, scale drum 20 Ø, in case with setting wrench and conformity declaration. Precision Micrometer Gauges For tooth pitch measuring starting at module 0,8 and for measuring distances between recesses and centring edges. Setting gauges see cat.-no measuring range measuring discs max. error Ø µm measuring range measuring discs max. error Ø µm Measuring spindle with hardened contact surfaces Ø 6,5, measuring stop made of hardened steel Ø 6,5, measuring force max. 10 N, but higher surface pressure than with standard micrometer gauges with equal measuring force, graduation Precision Micrometer Gauges 0,01, accuracy in compliance with DIN 863, Part 3. In case with setting wrench and conformity declaration. Measuring anvil ball-shaped for measuring wall thicknesses of tubes and other curved parts Measuring range MICROMASTER With capa µ system and interface Opto RS 232. Non-revolving spindle, Ø 7,5, without locking device, with mounting hole for measuring tips. Laterally adjustable holder at the anvil side for measuring tips with locking device. Resolution 0,001, display of or inch, error tolerance of micrometer gauge element 3 µm. Measuring force max. 10 N. Zero-setting in any position. LC display, digit height 7. Battery (3V, type CR 2032) for long-term operation. Marked with ID-number. In case with test report and declaration of conformity. 7 pairs of exchangeable measuring tips, hardened steel. Precision Digital Micrometer Gauges capa µ system Contact surfaces: (1) = flat, (2) = small, flat, (3) = large, flat, (4) = narrow, flat, (5) = cutting blade-shaped, (6) = spherical, (7) = cone-shaped. Contact points with especially shaped contact surfaces available on request. Setting gauges see cat.-no Connecting cable see cat.-no Spare batteries see cat.-no Measuring range Opto RS x x 102

23 31670 ISOMASTER AS Contact surfaces arranged prismatically, carbideequipped. Graduation 0,01, measuring force max. 10 N. Accuracy in compliance with DIN 863. Marked with ID-number. In case, with declaration of conformity. For measuring workpieces such as part odd-numbered grooved milling cutters, reamers and taps, splined shafts and odd-numbered polygones. Detection of roundness deviations on cylindrical surfaces. Prism 60 Measuring range Precision Micrometer Gauges Opening angle of prism 60. Spindle pitch 0,75. For 3-part workpieces Opening angle of prism 108. Spindle pitch 0,559. For 5-part workpieces. Prism 108 Measuring range Measuring and laying-out tools, gauges MICROMASTER With interface Opto RS 232 and prismatically arranged contact surfaces, carbide-equipped. Graduation 0,001, display of or inch, measuring force max. 10 N. Accuracy in compliance with DIN 863. LC display, digit height 7. Battery (3V, type CR 2032) for long-term operation. Marked with ID-number. In case with test report and declaration of conformity. Precision Digital Micrometer Gauges Opening angle of prism 60. Spindle pitch 0,75. For 3-part workpieces Opening angle of prism 108. Spindle pitch 0,559. For 5-part workpieces For measuring workpieces such as odd-numbered grooved milling cutters, reamers and taps, splined shafts and odd-numbered polygones. Detection of roundness deviations on cylindrical surfaces. Connecting cable see cat.-no Spare batteries see cat.-no Prism 60 measuring range Opto RS x x x x x x 106 Prism 108 measuring range Opto RS x x x x x x Dimension noted on the face. Starting at nominal size 20 with plastic panels. ID-number and declaration of conformity included. Cylindrical Setting Reference Pieces Gauge-grade steel, hardened Ø Ø

24 Micrometer depth gauges micrometer heads inside micrometer gauges With friction coupling, scale sleeve and scale drum with matt-chrome finish, with clamping ring, exchangeable measuring pins, each by 25 size increments. Measuring base and measuring needle Precision Micrometer Depth Gauges ends (Ø 4 ) hardened and lapped. Accuracy exceeds DIN 863, graduation 0,01, measuring range 25, spindle pitch 0,5, in case, with setting wrench and declaration of conformity Measuring range Base span Number of max. error x -width measuring pins µm x x x x x Measuring pins non-revolving. Exchangeable measuring pins, set in 30 increments. Therefore, no adjustment of display after exchange.measuring pins (Ø 3 ) made of steel, ends hardened. capa µ system. Resolution 0,001 / inch, display of or inch. Accuracy in compliance with DIN 863 T2. Interface Opto RS 232. Thread pitch 0,5. Error tolerance 3 µm (measuring element). In plastic case, with declaration of conformity. Digital Micrometer Depth Gauges Connecting cable see cat.-no Spare batteries see cat.-no measuring range measuring range measuring pin in ,5 50 x ,0 100 x Precision Micrometer Heads Measuring spindle fully hardened, thread ground, measuring drum and measuring sleeve with mattchrome finish. With ratchet and turning spindle, accuracy exceeds DIN 863. Measuring drum Ø 20, Contact surfaces carbide-equipped Ø 6,5, Spindle pitch 0,5, Graduation 0,01. With conformity declaration Measuring range d 1 d 2 h 6 d 3 l 2 l 3 l ,5 27,5 (at 0) 16 73,5 (at 0) 301 d 3 l 2 d 2 0 l 3 l 4 d Precision Digital Micrometer Heads X With interface RS 232, in combination with external power source. Patented SYLVAC measuring system. LC display, digit height 6. Scale Ø 44, rotatable 270. Simplex transmission, non-revolving spindle, carbide contact surface. Connecting cable see cat.-no Spare batteries see cat.-no Measuring range Measuring range Error tolerance Repeatability inch RS x 0,005 0, x 0,008 0,

25 Graduation 0,01, spindle pitch 0,5, scale drum Ø : MB = 15, MB = 16, MB = 17, MB = 20. Body made of steel, mattchromed finish, this ensures dazzle-free readings. Spindle thread hardened and ground. Accuracy exceeds DIN 863. With setting wrench and conformity declaration. For inside measurements of cylindrical holes, diameters of turned grooves, distance of two planeparallel surfaces etc. Precision 2-Point Inside Micrometer Gauges Contact surfaces carbide-equipped and ballshape lapped. Further set compositions, extension pieces as well as holders available on request Sets consist of: 1 inside micrometer gauge (cat.-no ) and extension pieces (see table): steel, hardened and lapped, with insulating handles for heat transmission protection. Connecting thread M7. In case. Measuring and laying-out tools, gauges Single inside micrometer gauges, capacity : Without clamping ring. Heavy-to-run spindle thread in order to avoid involuntary movements of the scale drum during measurement. Contact surface Ø Single inside micrometer gauges, measuring range : With clamping ring and heat transmission protection. Easy turning spindle thread for quick setting to the desired measurement value. Clamping ring for locking the scale thimble while measuring. Contact surface Ø 6. Set Measuring range max. error Gauge block extensions µm Length / 50 / 50 / / 50 / 100 / / 50 / 100 / 200 / / 50 / 100 / 200 / 400 / single Measuring range max. error µm single Measuring range max. error µm With single-ended measuring jaws, measuring depth 5. Measuring sleeve, measuring drum and measuring jaws with matt-chromed finish, ballshaped carbide-equipped contact surfaces, ratchet, locking screw, graduation 0,01. Accuracy in compliance with DIN 863, spindle pitch 0,5, measuring drum Ø 17. In case. Inside Micrometer Gauges For inside measuring Measuring range Setting ring Large measuring range thanks to double-sided jaws with 2 separate inner scale sleeves for easy reading (5-55 measuring range). Starting at measuring range with one-sided measuring jaws. Cylindrical contact surfaces, carbide-equipped, small jaws made of stable, semicircular carbide, therefore almost no bending. Easy operation thanks to ball-bearing spindle. Precision Inside Micrometer Gauges Graduation 0,01, thread pitch 0,5. Repeatability 2 µm. Friction coupling 21 Ø on scale drum, this allows for sensitive measurements. Accuracy exceeds DIN 863. In case. Ideal for measurements of boreholes when turning, milling and grinding. Precise measurements thanks to easy handling, even in µm dimensions. Wellpriced alternative to 3-point inside micrometer gauges with same measuring accuracy Measuring range max. error µm , , , , ,

26 Measuring instruments UNIMASTER INOTEST UNITEST Horizontal small length measuring instruments m SHE.30 and SHE.35 Very handy and very precise measuring instrument for serial measurements of small precision parts, for the horological industry and precision mechanics. Quick during the measurement and when switching to differently-sized workpieces. Large selection of special contact points for different measuring projects. Please send us your enquiry! Full set consists of: 1 measuring element with one fixed and one laterally movable, ball-guided measuring stop, 3 pairs of exchangeable, carbideequipped measuring tips, 1 setting reference piece, 9 extension pieces with built-in gauge block and carbide-equipped contact surfaces and fixing accessories for positioning (for further information on the respective elements see cat.-no ). Accuracy in compliance with DIN Swiss made, in case. Assembly wrenches and declaration of conformity included. Multi-Purpose Measuring Instrument Sets UNIMASTER Characteristics of the TESA UNIMASTER: - high measuring accuracy, - minimum bending thanks to high rigidity, - heat resistance, - internal and external measurement in horizontal and vertical bearings, - continuious measuring force, - easy access to the stationary point, - adjustment of the display by means of setting reference piece. For length measurements of very large inside and outside dimensions Measuring range inside outside Measuring element With measuring screw and shock-proof dial, adjustment of measuring force by adjusting screw on movable measuring stop, capacity (internal) and (external), graduation 0,01, spindle pitch 1, deviation tolerance of display max 5 µm, Swiss made Measuring inserts, pair For internal measurements in instrument axis Measuring inserts, pair For internal and external measurements up to a measuring depth of 60 above instrument lower edge. Individual elements UNIMASTER Measuring inserts, pair For external measurements up to a measuring depth of 75 above instrument lower edge Setting reference Inside dimension 250, outside dimension Extension pieces Steel pipe 38 Ø, correct positioning of gauge block by pressure spring Fixing accessories 4 angle pieces and 4 clamping pieces Case. For full set. Special accessories like measuring inserts for inside and outside measuring, turned grooves and support rolls for positioning purpose are available on request Measuring element Measuring tips Setting reference piece Extension Fixing accessories Case Length

27 31815 Full set consists of: 1 measuring element with waterproof dial indicator and laterally movable measuring stop, graduation 0,01, 2 pairs of exchangeable, carbide-equipped measuring tips, 4 extension pieces, telescoping, 3 insulated handles for heat transmission protection and fixing accessories for positioning (for a detailed description of the respective elements see cat.-no ), Swiss made. In case with assembly wrenches and declaration of conformity. TESA Comparison Measuring Instrument Sets INOTEST INOTEST is adjusted to the specified dimension by a separate reference piece and shows the real dimension of the workpiece with high precision. For large inside and outside measuring with the comparison measuring method. Measuring and laying-out tools, gauges Measuring range inside outside Measuring element With waterproof, shock-proof dial, laterally flexible, ball-guided measuring anvil, adjustment of measuring force for inside and outside measuring, graduation 0,01, measuring range 10, measuring force 4-7 N, Swiss made Measuring inserts, pair For internal measurements along instrument axis. Individual Elements INOTEST Measuring inserts, pair For internal and external measurements up to a measuring depth of 30 above instrument lower edge Extension pieces Tubular steel 25 Ø, With telescope pipe 19 Ø Insulated handles for heat transmission protection, single Fixing accessories 4 fixing bolts 7 Ø, 40 long Case, for full set. Special accessories like additional extensions, measuring inserts for grooves and special instruments for inside measuring from 35 and outside measuring from 15 available on request Measuring element Measuring tips Extension Insulating grip Fixing accessories Case Measuring range inside outside Full set consists of: 1 micrometer gauge element with dial indicator and lateral measuring stop, 1 setting reference piece, 6 extension pieces with built-in gauge block and carbide-equipped contact Precision Inside Measuring Instrument Sets UNITEST surfaces (for further information on the respective elements see cat.-no ). Accuracy in compliance with DIN 863-4, Swiss made, in case with assembly wrenches and declaration of conformity. For absolute and relative measurement Measuring range

28 Measuring instruments UNITEST inside micrometer gauges/inside measuring pistols Micrometer Gauge Elements With shock-proof dial indicator, rotatable dial face and locking screw, laterally movable measuring stop, measuring force 0,7-1 N. Measuring faces carbide-equipped, exchangeable thanks to contact points for blind holes or additional elements for external measurements (special accessories), measuring range , display: graduation 0,1, scale pointer: 0,01, deviation tolerance of display max. 8 µm, Swiss made. Individual elements UNITEST Extension pieces Tubular steel 26 Ø, accurate positioning of gauge block by pressure spring Case, for complete set. Special accessories, e.g. suspension device for a depth of up to 100 (see figure A) available on request. A Setting reference Combined with inside and outside reference 200. Measuring element Setting reference piece Extension Case Length Measuring range 2-6 with 2-point measuring head. Measuring jaws up to a measuring range of 12,5 made of carbide. Starting at a measuring range of 12,5 with carbide inserts. Constant measuring force thanks to ratchet. High-precision hardened and ground measuring spindle. Vernier 0,005. Analogue display matt-chromed finish. Accuracy in compliance with DIN 863. Up to a measuring range of 12,5 for throughhole. Measurements are possible up to 1,9 above ground. Starting at a measuring range of 12,5 for through-holes and blind holes. Measurements are possible up to 0 above ground. Precision 3-Point Inside Micrometer Gauges XT Sets In case with setting rings UKAS calibration certificate and setting wrench included Individual inside micrometer gauges. In case with setting wrench, without setting ring Sets Measuring range Inside micrometer gauges measuring range ,5 / 2, / 4-5 / / ,5 / 12,5-16 / / / / / single Measuring range , , single Measuring range , , single Measuring range single Measuring range

29 Measuring range 2-6 with 2-point measuring head. With interface RS 232. Measuring jaws up to a measuring range of 12,5 made of carbide. Starting at a measuring range of 12,5 with carbide inserts. Replaceable measuring heads. Constant measuring force thanks to ratchet. Highprecision hardened and ground measuring spindle. LC display digit height 6 for error-free readings. Battery (3V, type CR 2032) for long-term operation. Display of or inch, input of 2 preset values, resolution can be switched from 0,01 to 0,001, HOLD-function for the last measured value, input of tolerances, max/min-function, zerosetting and preset. In case with setting wrench. Digital 3-Point Inside Micrometer Gauges XTD IP 65 Up to a measuring range of 12,5 for throughholes. Measurements are possible up to 1,9 above ground. Starting at a measuring range of 12,5 for through-holes and blind holes. Measurements are possible up to 0 above ground. Connecting cable see cat.-no Spare batteries see cat.-no Sets consist of: Digital display, measuring heads, setting rings, UKAS calibration certificate Individual inside micrometer gauges. Digital display included, without setting rings. Sets Measuring range Measuring heads Setting rings Measuring range Ø RS / x ,5 / 12,5-16 / ,5 / 20 x / / / 35 x / / / 80 x 205 Measuring and laying-out tools, gauges single Measuring range RS x x ,5 x ,5-16 x x x x x x x x x x x x Digital 3-point inside measuring pistols XTH IP 65 Resolution 0,001, repeatability 2 µm. RS 232 interface. Patented measuring system, LC display, digit height 6. Carbide-equipped inserts starting at 12,5. Measurement of blind holes starting at 12,5. Fixed contact points. UKAS test certificate for all rings and UKAS calibration certificate for all testing equipment included. Manufactured in compliance with DIN 863. Protection class IP 65. In wooden case Sets consist of: Digital display, measuring heads, setting rings, UKAS calibration certificate Individual inside micrometer gauges. Digital display included, without setting rings. Connecting cable see cat.-no Spare batteries see cat.-no Sets measuring range number of number of Measuring force heads rings N SXTH SXTH SXTH SXTH SXTH SXTH single measuring range deep max. error with ring µm XTH6 6,0-8, ,0 101 XTH8 8,0-10, ,0 102 XTH10 10,0-12, ,5 103 XTH ,5-16, ,5 104 XTH16 16,0-20, ,0 105 XTH20 20,0-25, ,0 106 XTH25 25,0-35, ,0 107 XTH35 35,0-50, ,0 108 XTH50 50,0-65, ,0 109 XTH65 65,0-80, ,0 110 XTH80 80,0-100, ,0 111 XTH ,0-125, ,0 112 XTH ,0-150, ,0 113 XTH ,0-175, ,0 114 XTH ,0-200, ,

30 Inside micrometer gauges Ä Extremely large measuring range Ø with only 6 inside micrometer gauges. Maintenance-free thanks to the Microtest system, matt hard chrome-plated housing, clear dial engravings. Automatic self-centring. 1 m parallax-free, direct full reading (1, 1/10, 1/100, 1/1000 ). 1 pointer revolution = 1, therefore no reading errors, no calculation necessary. Accuracy: Works norm exceeds DIN 863. Minimised bevel gear clearance, improved forced return of the probes. Isolation provides for protection against dirt and heat expansion. Suitable for digital technology. In case. Swiss made. Blind holes can be measured to the ground. Very precise measurements even in big measuring ranges. Improved extensions for larger depths. Precision 3-Point Inside Micrometer Gauges Sets consist of: inside micrometer gauge, setting rings (measuring range ) and control gauge (measuring ranges and ), extensions (see table), 1 screwdriver Inside micrometer gauge, single Extension pieces Control gauge Ø , contact surfaces hard chrome-plated, in case. For the adjustment of 6 inside micrometer gauges Replaces numerous setting rings Other dimensions up to a maximum Ø of 1100 available on request, therefore lower calibration and certification costs. Sets Measuring range Inside micrometer gauge Setting rings Extension pieces measuring range control gauge Ø Length / / / / / / / / / / Single Extension Control gauge Case Measuring range Measuring depth Length Precision 3-Point Inside Micrometer Gauges, Sets IMICRO Self-centring and self-positioning micrometer gauges with high measuring accuracy. Accuracy of reading up to measuring range = 0,001, measuring ranges through = 0,005, starting at measuring range = 0,01. Measuring bolts are fully coated with diamond-like carbon (ADLC/hardness HV 0, through 6000 = measuring range ), and carbide-equipped (hardness HV 1300 = measuring range ), inclusive of ratchet, setting rings and extension pieces, accuracy in compliance with DIN 863/4, Swiss made, in case with assembly wrenches and test report with declaration of conformity. For measuring cylindrical holes, for large capacities and measuring depth Measuring range Inside micrometer gauge Setting rings Extension pieces measuring range Ø length 3,5-6,5 3,5-4 / 4-4,5 / 4,5-5,5 / 5,5-6,5 4 / 5, / 8-10 / / / / / / / / / / / / / / / 70 / / / / /

31 31916 IMICRO See cat.-no , but single. Extension pieces see cat.-no Precision 3-Point Inside Micrometer Gauges Measuring and laying-out tools, gauges Measuring Graduation Measuring range depth 3,5-4 0, ,5 0, ,5-5,5 0, ,5-6,5 0, , , , , , , , , , , Measuring Graduation Measuring range depth , , , , , , , , , , , , , , IMICRO With interface RS 232 C. Self-centring and selfpositioning micrometer gauge with high measuring accuracy. LC display with resolution 0,001 /0,00005, display of or inch, digit height 7, memory mode for basic setting, automatic turn-off (battery 3V, CR 2032), incl. ratchet. Swiss made. Accuracy in compliance with DIN 863/4. In case. Marked with serial number, with test report and declaration of conformity. For measuring cylindrical holes, for large capacities and measuring depth. Measuring range 6-12 : contact surfaces made of steel, hardened. Measuring range : TiN-coated, hardness HV 0,05. Digital 3-Point Inside Micrometer Gauges capa µ system Connecting cable see cat.-no Spare batteries see cat.-no Sets consist of: 1 electronic measuring element, exchangeable measuring heads, setting rings, extension pieces (see table) Individual inside micrometer gauges. Electronic measuring element and measuring head included Sets Measuring range Measuring heads Setting rings Extension sleeves Ø RS 232 C / 8-10 / / x / / / x / / / / x / / / / / / 70 / x 104 single Measuring A B C range RS 232 C 6-8 2,5 2,5 55 x ,5 2,5 55 x ,5 2,5 55 x ,5 4,0 68 x ,5 4,0 68 x ,5 4,0 83 x ,0 7,0 83 x ,0 7,0 88 x 108 single Measuring A B C range RS 232 C ,0 7,0 88 x ,0 7,0 88 x ,0 12,0 98 x ,0 12,0 98 x ,0 12,0 98 x ,0 12,0 98 x ,0 12,0 98 x ,0 12,0 98 x

32 Extensions inside micrometer gauges Extension Pieces For digital 3-point inside micrometer gauges TESA IMICRO capa µ system (cat.-no ) and TESA IMICRO (cat.-no ). Micrometer gauges and centring devices not included. Lengths up to 1000 and centring devices available on request Length for measuring range Ø TRI-O-BOR Self-centring and self-adjusting. Exchangeability allows use of measuring inserts for internal threads as well as inserts with special profiled contact surfaces. Combined display: Numerical interval 0,01, scale division 0,002. Deviation tolerance f max : = 3 µm, = 4 µm, = 5 µm. Repeatability f w : = 4 µm, = 5 µm, = 6 µm. Accuracy in compliance with DIN 863/4. In case, 1 heat protection sleeve, 2 assembly wrenches, 1 screwdriver and test report with declaration of conformity included. Swiss made. Precision 3-Point Inside Micrometer Gauges For through-holes and blind holes and for measuring short centring shoulders. Cross cone and measuring pin carbideequipped. Measuring inserts for internal threads and for special purposes available on request measuring Measuring range depth Measuring Measuring range depth Measuring Measuring range depth High-quality brand to satisfy highest requirements Innovative tools High availability Vast range of products Strict quality control 0 Impressive brand. Impressive tools

33 ALESOMETER With capa µ system and interface Opto RS 232. Touches the workpiece at three points. Measuring bolts made of steel, hardened (measuring range 6-10 ) and carbide-equipped (measuring range ). Resolution 0,001 / inch, display of or inch, zero-setting in any position, display lock. LC display digit height 7. Battery (3V, type CR 2032) for long-term operation. Accuracy in compliance with DIN 863. Protection class of measuring unit IP 54. When using the digital port IP 40. In case with ID number and test report with declaration of conformity. Up to 10 for through-holes. Above 10 also for blind holes and short centring shoulders. Digital 3-Point Inside Micrometer Gauges capa µ system Above 10 no measurement A, because the measuring bolts reach the face of the instrument. Connecting cable see cat.-no Spare batteries see cat.-no Sets consist of: 1 electronic measuring element, exchangeable measuring heads, 1 adapter, setting rings (see table) Individual inside micrometer gauges. Electronic measuring element and measuring head included. Measuring and laying-out tools, gauges Sets Measuring range Measuring heads Setting rings Opto Ø RS / x ,5 / 12,5-15 / 15-17,5 / 17, ,5 / 17,5 x / / / / 35 x / / / / / 60 / 85 x 104 single Measuring range Error Repetition A B C Opto tolerance µm limit µm RS ,2 3,0 55 x ,2 3,0 55 x , ,0 6,5 65 x , ,0 6,5 65 x , ,0 6,8 65 x , ,0 6,8 95 x ,0 8,5 100 x ,0 8,5 100 x ,0 8,5 100 x ,0 8,5 100 x ,0 14,5 140 x ,0 14,5 140 x ,0 14,5 140 x ,0 14,5 140 x ,0 14,5 140 x ,0 30,0 175 x ,0 30,0 175 x ,0 30,0 175 x ,0 30,0 175 x Impressive brand. Impressive tools

34 High-quality brand to satisfy highest requirements Innovative tools High availability Vast range of products Strict quality control 0 Impressive brand. Impressive tools.