CALIPERS VERNIER, DIAL AND DIGITAL. Micron Digital Calipers 0,001mm. Vernier Calipers 0,02mm. Item No. Measurement Range Accuracy

Transcription

1 CALIPERS VERNIER, DIAL AND DIGITAL Micron Digital Calipers 0,001mm Vernier Calipers 0,02mm Special vernier section structure anvoids parallax error for easy reading and more accurate measuring Prevents vernier slide loosening to avoid error Permit repeated repairs & improved longevity Digital Calipers 0,02mm With Large LCD display for easy reading, this instrument uses a totally new, high accuracy capacitive sensor, a latest innovation in electronic measuring, to make its resolution be up to 0.001mm. can reach higher accuracy mm mm 10 ±0,005 ±0,007 Resolution 0.001mm ( Micron Digital caliper). Used for measuring the work piece demanding higher accuracy. Excellent for differential measurement (comparison measurement) of the OD, ID, groove, steps, depth (with bridge base), etc. of a work piece. Inch/mm conversion. Data output. High Precision Digital Calipers 0,005mm Shockproof Clear and direct reading Outside, inside, depth and step measurement Available with carbide-tipped measuring faces to improve the durability and longevity Digital Calipers 0,0mm Jaw length -051=40mm -052=50mm -53=60mm ±0,015 5 Inch/mm conversion. Data Output. Absolute and relative measurement conversion at any position. Carbide-tipped Digital Calipers N.B. Type 170 has 2mm / revolution and type 170 1mm Shockproof Clear and direct reading Outside, inside, depth and step measurement Available with carbide-tipped measuring faces to improve the durability and longevity Carbide-tipped measuring faces to improve the durability and longevity The internal jaws measurement accuracy accord with DIN862

2 IP54 Damp Proof Digital Calipers Complete Titanium Coated Digital Calipers IP54 Level: protection against harmful dust and water splashes. Can be used after cleaning the water splashes The internal jaws measurement accuracy accord with DIN IP67 Water-Resistant Digital Calipers Waterproof, oil-proof, anti-electromagnetic interference, protection Level IP67 (CEI 60529) One-button design, menu prompt, simple, convenient and easy to operate. Manual / automatic power switch. automatic shutdown after 5 minutes without being used (Note: Some models will automatically reboot at a 16-hour shutdown when the slider is moved.) Low-voltage alarm, high and low temperature, and other error alarm. Infinite response speed, no speed error. ABS / INC mode and metric / inch system conversion T T T Golden T Black TiAlN or TiN coating to improve durability and working life. Titanium coating the complete surface of caliper, such as the front and rear master bar and the jaws gives the caliper a thorough protection, which significantly increases the performance of antirust and wear resistance and prolongs its working life. Therefore a complete titanium coated electronic caliper is cost-effective. Slide calipers inside and outside measuring faces are worn gradually with frequent use. The worn measuring faces lessen the measurement accuracy. In order to improve the performance of a slide caliper, tungsten carbide is welded on the jaws. Tungsten carbide is so brittle that the tungsten carbide tipped jaws are easily broken when bumped during use, which hinders its popularity. Recently in the market the slide caliper coated with titanium on the upside and underside of master bar appeared. However, other important contact surfaces, remained uncoated. These slide caliper still can t significantly improve the performance of antirust and wear resistance for all its surfaces. By using an innovative method, complete titanium coated electronic caliper has its master bar and all its measuring faces coated with TiN or TiAlN, increasing the wear resistance significantly. Pocket Digital Calipers Left-Hand Digital Calipers Designed for left-handed use mm 0 100mm

3 Digital Calipers without upper jaws (Type D) Digital Welding Gauges mm 0 800mm mm mm ,5mm 0 20mm used for measuring welding within industry - auto, shipping, boiler, etc. Measure the height of the welding. Testing the angle of the groove (four contrast sample plate with angles of 60, 70, 80 and 90 degrees are provided). Digital Inside and Outside Snap Gauges Digital Spline Gauges Inside from Ø5mm 0 30mm (0,005mm) ±0,003 ±0,005 Light weight, small size, easy to operate with one hand. Easy to use in narrow space.. Inch/ Metric conversion mm 0 50mm Used to measure the depth of spline on workpiece. Used to measure the height of convex part on a surface. mm/inch conversion With data output Digital Snap Gauges Gap & Step Gauges mm () 0 30mm (0,005mm) Light weight, small size, easy to operate with one hand. Easy to use in narrow space.. Inch/ Metric conversion ,7mm Widely used for checking the surface in the auto industry and other various application measurements. Measure the step height and gap width of two curved surfaces. Lightweight and easy to operate..

4 Digital Depth Gauges (Double Hooks) Digital Calipers with Broad Measuring Faces Bridge length 100mm -1=150mm Grove depth measurement. Hook types can measure groove width and position of a groove Extra large measuring faces for soft materials (rubber, paper, cardboard etc.) and wire diameters. Rigid measuring. Measuring face dimension can be customized. Tube Thickness Digital Calipers Pocket Digital Calipers 0 75mm 0 100mm Depending on the hardness of workpieces, a long and short anvil are available Long cavity mould anvil for measuring the soft materials, such as plastic; and short anvil for measuring hard tubular tools including metal tubes, porcelain tubes etc. 360 O Rotatable Jaw Calipers Digital Calipers without upper jaws (Type D) mm 0 800mm mm mm Digital Type 0-500mm Vernier Type 0-500mm ±0,06 ±0,06

5 Outside Groove Calipers with Round Points Straight Moving Digital Micron Caliper 0,001mm The caliper shown is No The jaw length and point length are available in 3 standard sizes Measures the external groove and tube wall thickness mm ±0,004 It looks like a micrometer, accords with the Abbe's principle. It is the combination of calipers and micrometers. However it does not operate as a micrometers. Simply operate it in a caliper form for quick, convenient accuracy. High processing accuracy due to super precision linear motion adapted in vernier slide and beam. Digital Height Gauge with Double Datum Surfaces Internal Spacing Groove Digital Calipers mm 3 200mm 4 300mm Measures the inside spacing groove width and position of a groove mm 0-300mm Both the upside and the underside of the base are datum surfaces. The slider has jaws on the left and right side. The jaw on the slider's left is for the bottom measuring face. The jaw on the slider's right is for the upside measuring face. (When the base is on the inspection surface plate, the surface of the plate is regarded as the extension of bottom measuring face.) If an inspection surface plate is unavailable, the upside of the base can be used as an inspection surface plate and measurement can still be done with the slider's right jaw. The range of application can be widened with various attachments.