Assembly Instructions. JPM-1 Just Pure Magic Adjustable Printer Stand

Transcription

1 Assemby Instructions JPM-1 Just Pure Magic Adjustabe Printer Stand

2 Just Pure Magic Printer Stand JPM-1 Part Drawing Description Qty Leg Frame 2 EA Part Drawing Description Qty Hardware List A Fat Head Screw 12 EA P-2 Back Stabiity Pane 1 EA Square Shouder Screw 4 EA B Interior Threaded Post 4 EA P-3 Long Meta Pates 2 EA C Leveing Feet 4 EA P-4 Short Meta Pates 4 EA D 2 Locking Casters (for Front) 2 EA E 2 Casters (for Back) 2 EA P-5 Forms Basket 1 EA F Aen Wrench 1 EA G Caster Wrench 1 EA P-6 Forms Rack 1 EA H Cabe Cips 4 EA J Wing Nuts 8 EA To Assembe: K Fat Washer 8 EA 1. Identify and Separate a the Parts and Hardware. 2. Attach Back Stabiity Pane (P-2) to 2 Leg Frames () using 4 Fat head Screws (A) and 4 Interior Threaded Posts (B) as shown in iustration # 1. (Do not tighten the screws a the way) Iustration # 1 B A 3. Attach 4 Leveing feet (C) or Casters to the Leg Frames [If casters, 2 Locking casters (D) in the front and 2 Casters (E) in the back. Tighten the Casters using Caster Wrench (G)] P-2 Do not use uness a screws are tight. At east every six months, check a screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product unti repairs are made by your deaer using factory authorized parts. E D

3 JPM-1 Just Pure Magic Adjustabe Printer Stand Assemby Diagram 4. Attach 2 Long Meta Pates (P-3) and 4 Short Meta pates (P-4) to the Leg Assemby () using 4 Square Shouder Screws (), Fat Washers (K) and Wing Nuts (J). See back page for different options. [Option #3 shown here.] Iustration # 2 K J P-3 Note: Long Meta Pates shoud be attached with Channe side down, and Short Meta Pates with the channe side up. P-4 Iustration # 3 P-5 5. Insta Forms Basket (P-5) in the hoes on the Leg frame assy () as shown in iustraion # Pace Forms Rack (P-6) on ower part of Leg Frame Assemby (). P-6 7. Tighten a screws securey using the Aen Wrench (F).

4 1. FOR LARGE PRINTERS Attach 2 Long Meta Pates (P-3) [through outer hoes] and 4 Short Meta pates (P-4) to the Leg Frames using 4 Screws (), 4 Fat Washers (K) and 4 Wing Nuts (J). Note: Long Meta Pates shoud be attached with Channe side down, and Short Meta Pates with the channe side up. P-4 P-3 3. FOR NARROW PRINTERS Attach 2 Long Meta Pates (P-3) [through outer hoes] to the Leg Frames using 4 Screws (A), 4 Fat Washers (K) and 4 Wing Nuts (J). Then attach 4 Short Meta Pates (P-4) through the inner hoes on the Long Meta Pate using 4 Screws (), 4 Fat Washers (K) and 4 Wing Nuts (J). K J OPTION # 2 Inner Hoe Outer Hoe OPTION # 3 OPTION # 1 Important P-4 P-3 Outer Hoe 2. FOR EXTRA STABILITY WITH LARGE PRINTERS Attach the Long Meta Pates (P-3) and Short Meta Pates (P-4) same as for the arge Printers. Then attach Short Meta Pates through the inner hoes on the Long Meta Pate using 4 Screws (), 4 Fat Washers (K) and 4 Wing Nuts (J) for added stabiity. The Bat product you have purchased is guaranteed against materia and workmanship defects. This guarantee extends 1 year from date of purchase. Shoud this product fai to function satisfactoriy under norma use due to defect or imperfection, the defective part or product wi be repaced. Damage caused by common carriers during shipment is not incuded in this guarantee. This guarantee sets forth a appicabe guarantees and remedies. No other warranty, expressed or impied sha appy. Faiure to foow instructions found in Important Information Section of Owner Sheet sha void the guarantee. Consequentia or incidenta damages and or costs are not refundabe. P-4 P-3 Shoud you require assistance during assemby, pease ca our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Centra Standard Time To-Free Customer Service

5 JPM-1 Just Pure Magic Adjustabe Printer Stand For more information (adj) 6-29 (adj) 27" w/ gides 24" 21" Shipping Information 2.0 Cubic Feet 24 bs. Four top pates adjust independenty to accommodate teh smaest to argest printers. 5 Standard with one-piece bottom forms rack and printout receiving basket. This can hod two fu boxes of forms casters incuded. Ships UPS. JPMasm.pm6-07/05/00