10-PIECE. Garage Storage Set OWNER'S MANUAL. Patent pending

Size: px
Start display at page:

Download "10-PIECE. Garage Storage Set OWNER'S MANUAL. Patent pending"

Transcription

1 10-PIECE Garage Storage Set OWNER'S MANUAL Patent pending

2 IMPORTANT When you open the cartons, carefully check the units and make sure there IS NO damage. If you have any problems with the units or with damage or MISSING parts, please GO TO our and click on customer support. Do NOT return the units TO the STORe before GOING TO our website. do NOT dispose of your cartons until you are completely SATISfied with your new GARAGe STORAGE SET. To reduce the RISk of INjury, the user must read and understand this OWNER'S MANual before using these products for the first TIMe. Fill in the following information and retain this manual for future reference: Model(S) DATE OF PURCHASE PLACE OF PURCHASE RECEIPT NO 2

3 SAFETY WARNING Use two people to move the units into place. Failure to do so can result in back or other injuries. WARNING DO NOT leave children unattended near the garage storage set. WARNING DO NOT stand on the product or lean on the drawers or work top. WARNING WEAR SAFETY GLASSES when removing or repositioning the slides. The tool could slip, causing personal injury. WARNING DO NOT alter this product in any manner. For example, do not weld external lock bars or attach electrical equipment. This may cause product damage or personal injury. WARNING Close and lock the doors and drawers before moving this product. The doors or drawers could come open and make the product unstable and tip, which may cause personal injury or product damage. WARNING DO NOT OVERLOAD UNITS! The units are designed to carry the following maximum weight capacity: UNIT MAX WEIGHT WEIGHT PER Shelf/ DRAWER Top Cabinet 60 lb (27.2 kg) 30 lb (13.6 kg) 2-Door Base Cabinet 200 lb (90.8 kg) 50 lb (22.7 kg) 4-Drawer Base Cabinet 300 lb (136 kg) 50 lb (22.7 kg) 2-Door Stackable Base Cabinet 100 lb (45.4 kg) 50 lb (22.7 kg) Peg Board 12.5 lb (5.7 kg) n/a CAUTION BE CAReful when opening more than one drawer. The product could become unstable and tip, which may cause personal injury or product damage. CAUTION Keep the product on level surfaces. The product could become unstable and tip if stored or moved on an uneven surface, which may cause personal injury or product damage. 3

4 PARTS LIST Note: Replacement parts can be ordered by going to and clicking on Customer Support. Please have your original receipt, part number and quantity ready when you order. Replacement keys may be ordered using the required code which appears on the face of the lock. Not all parts are covered under warranty. Those parts not covered may be purchased. x x x The keys are in the hardware kit. Four keyed-alike keys are provided with this garage storage set. 2 x TOP CABINET Top Panel Bottom Panel PARTS PER UNIT PART # DESCRIPTION QTY Gas Strut End Cover Lock ( ) Shelf Shelf Support 4 4

5 1 x 2-DOOR BASE CABINET Bottom Panel PART # DESCRIPTION QTY End Cover Lock ( ) Shelf Shelf Support Work Top * 1 * NOTE: The work top is packed separately. 5

6 1 x 4-DRAWER BASE CABINET PART # DESCRIPTION QTY Work Top End Cover Slide Set Drawer Liner Lock ( ) 1 6

7 4 x 2-DOOR STACKAble BASE CABINET Top Panel Bottom Panel PARTS PER UNIT PART # DESCRIPTION QTY End Cover Lock ( ) Shelf Support Shelf 1 4 x PEG BOARD 1 PARTS PER UNIT PART # DESCRIPTION QTY Grommet 1 7

8 2 x RAIL SYSTEM 2 1 PARTS PER UNIT PART # DESCRIPTION QTY Cabinet Rail Peg Board Rail 2 HARDWARE KIT xx PART # DESCRIPTION QTY M6 x 16 Hex Flange Bolt M6 x 35 Hex Flange Bolt M6 Hex Flange Nut Washer M6 x 65 Hex Tapping Screw Adjustable Feet Key ( ) 4 8

9 ASSEMBLY TOP CABINETS Carefully separate the front and back panels, allowing the side panels to unfold completely. FIG. 1 Attach the top panel to the cabinet using eight M6 x 16 hex flange bolts. FIG. 2 Carefully lay the cabinet on its back on a soft surface to protect the finish. Insert the lip of the bottom panel into the slot on the back of the cabinet, making sure that the holes align. See Fig. 3A. Tilt the bottom panel onto the bottom of the cabinet. See Fig. 3B. Attach the bottom panel using ten M6 x 16 hex flange bolts. See Fig. 3C. FIG. 3A FIG. 3B FIG. 3C 9

10 Insert four shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports. FIG. 4 Screw two M6 x 16 hex flange bolts into the back of the top cabinet, leaving a 8 mm (0.31") gap. Do not tighten bolts fully. FIG. 5 8 mm (0.31") Repeat for the other top cabinet. 10

11 2-DOOR BASE CABINET Carefully separate the front and back panels, allowing the side panels to unfold completely. FIG. 6 Carefully lay the cabinet on its back on a soft surface to protect the finish. Insert the lip of the bottom panel into the slot on the back of the cabinet, making sure that the holes align. See Fig. 7A. Tilt the bottom panel onto the bottom of the cabinet. See Fig. 7B. Attach the bottom panel using eleven M6 x 16 hex flange bolts. See Fig. 7C. FIG. 7A FIG. 7B FIG. 7C Screw four adjustable feet into the cabinet bottom. FIG. 8 11

12 Attach the work top to the cabinet using four M6 x 16 hex flange bolts. FIG. 9 Insert four shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports. NOTE: The cabinet will only lock if the shelf is placed in the center position. FIG

13 Choose two shorter peg board rails and four longer cabinet rails. See Fig. 11A. Attach two cabinet rails to the 2-door base cabinet using six M6 x 16 hex flange bolts. See Fig. 11B. Connect one peg board rail to the top of each cabinet rail. Attach the bottom peg board to the two peg board rails using four M6 x 16 hex flange bolts. Make sure the grommet hole is on the bottom. Fig. 11C. Connect another cabinet rail to the top of each peg board rail. Attach the top peg board to the two peg board rails using four M6 x 16 hex flange bolts. Make sure the grommet hole is on the top. See Fig. 11D. Insert the heads of the M6 x 16 hex flange bolts on the back of one of the top cabinets into the top holes of the cabinet rails. Attach the top cabinet to the bottom of the cabinet rails with another two M6 x 16 hex flange bolts. Tighten all bolts securely. See Fig. 11E. FIG. 11A FIG. 11B FIG. 11C CABINet rails PEG BOARD rails FIG. 11D FIG. 11E 13

14 4-DRAWER BASE CABINET Screw four adjustable feet into the cabinet bottom. FIG. 12 Choose two shorter peg board rails and four longer cabinet rails. See Fig. 13A. Attach two cabinet rails to the 4-drawer base cabinet using six M6 x 16 hex flange bolts. See Fig. 13B. Connect one peg board rail to the top of each cabinet rail. Attach the bottom peg board to the two peg board rails using four M6 x 16 hex flange bolts. Make sure the grommet hole is on the bottom. Fig. 13C. FIG. 13A CABINet rails FIG. 13B FIG. 13C PEG BOARD rails 14

15 Connect another cabinet rail to the top of each peg board rail. Attach the top peg board to the two peg board rails using four M6 x 16 hex flange bolts. Make sure the grommet hole is on the top. See Fig. 13D. Insert the heads of the M6 x 16 hex flange bolts on the back of one of the top cabinets into the top holes of the cabinet rails. Attach the top cabinet to the bottom of the cabinet rails with another two M6 x 16 hex flange bolts. Tighten all bolts securely. See Fig. 13E. FIG. 13D FIG. 13E 2-DOOR STACKAble BASE CABINETS Choose two 2-door stackable base cabinets. These will be the bottom stackable cabinets on each stack. Carefully separate the front and back panels, allowing the side panels to unfold completely. FIG

16 Carefully lay the cabinets on their backs on a soft surface to protect the finish. Insert the lips of the bottom panels into the slots on the backs of the cabinets, making sure that the holes align. See Fig. 15A. Tilt the bottom panels onto the bottoms of the cabinets. See Fig. 15B. Attach the bottom panels using eleven M6 x 16 hex flange bolts per cabinet. See Fig. 15C. FIG. 15A FIG. 15B FIG. 15C Screw four adjustable feet into each cabinet bottom. See Fig. 16. Place the top panels on the cabinets, but do not attach. See Fig 17. FIG. 16 FIG

17 The two remaining 2-door base cabinets will be the top stackable cabinets on each stack. Carefully separate the front and back panels, allowing the side panels to unfold completely. FIG. 18 Attach the top panels to the cabinets using eight M6 x 16 hex flange bolts per cabinet. FIG

18 Carefully lay the cabinets on their backs on a soft surface to protect the finish. Insert the lips of the bottom panels into the slots on the backs of the cabinets, making sure that the holes align. See Fig. 20A. Tilt the bottom panels onto the bottoms of the cabinets. See Fig. 20B. Attach the bottom panels using eleven M6 x 16 hex flange bolts per cabinet. See Fig. 20C. FIG. 20A FIG. 20B FIG. 20C Place a top stackable cabinet onto a bottom stackable cabinet. See Fig. 21A. Connect the top stackable cabinet to the bottom stackable cabinet using four M6 x 35 hex flange bolts. See Fig. 21B. FIG. 21A FIG. 21B Repeat for the other stackable cabinet combination. 18

19 Insert four shelf supports inside each cabinet at the desired height. Place the shelves on the shelf supports. NOTE: The cabinet will only lock if the shelf is placed in the center position. FIG. 22 FINAL SETUP For the 2-door base cabinet/top cabinet combination, remove the four end covers located on the sides of the cabinets. Open all the doors. See Fig. 23A. For the 4-drawer base cabinet/top cabinet combination, remove the four end covers located on the sides of the cabinets. Remove the top drawer. Open the door of the top cabinet. See Fig. 23B. FIG. 23A FIG. 23B 19

20 Push the two base cabinet/top cabinet combinations together. Insert a M6 x 16 hex flange bolt through the two interior end cover holes and secure with a M6 flange nut. FIG. 24 For each stackable cabinet combination, remove the end cover from the interior side of the bottom stackable cabinet. FIG

21 Push a stackable cabinet combination towards either side of the base cabinet/ top cabinet combinations. Insert a M6 x 16 hex flange bolt through the two interior end cover holes and tighten with a M6 flange nut. FIG. 26 Attach the garage storage set to the wall using four M6 x 65 tapping screws and washers insert through wall studs. FIG

22 OPERATION DRAWER REMOVAL Pull the drawer out so that it s almost fully extended. Push up on the black release lever on one side, while pulling down on the black release lever on the other side. While holding the levers in the positions as instructed above, pull the drawer outward until it is released from the drawer slide. PUSH UP (ONE SIDE) PUSH DOWN (OTheR SIDE) DRAWER REPLACEMENT Extend the drawer slides from the cabinet. Insert the brackets on each side of the drawer into the slots in the slides, being careful that they are properly positioned. Once properly inserted, completely close the drawer to set the slides in their proper positions. MAINTENANCE Lubricate the slides (twice a year) with a product like WD40 or other quality lubricant. This is especially true as the temperature decreases, which can cause the bearing to become stiff. Periodically clean the drawer fronts, drawer trim and other surfaces with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. 22

23 FIVE YEAR LIMITED WARRANTY The product is warranted to be free from defects in materials and workmanship for a period of five (5) years from the date of original purchase. This warranty does not apply to products that have been misused, abused, damaged by accident or otherwise, subjected to abnormal use, or modified. If this product is defective, please go to and click on Customer Support. If the product is defective, in our opinion, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us, unless we send you written instructions for return. In the event it becomes necessary for your product to be returned, we will notify you how to proceed. A copy of your original purchase receipt MUST accompany the returned product. Exclusions Damage resulting from the improper handling or shipping of the garage storage set will void the warranty. Damage caused by accident, misuse, abuse, fire, flood, improper installation, acts of God, neglect, corrosion, modification or mishandling will void the warranty. Damage caused by improper loading beyond the specified maximum capacity for each component of the garage storage set will void the warranty. Repairs or replacement required due to commercial use or mishandling are not covered under warranty. Cosmetic damage such as scratches, dings, dents or cracks in the paint that do not affect the structural or functional capabilities of the product are not covered under warranty. Damage caused by chemical interaction resulting in corrosion of paint or metal will void the warranty. Warranty does not cover loss of garage storage set contents due to theft, fire, flood, accidents or acts of God. Warranty does not cover shipping or freight costs to deliver replacement parts or to return defective parts. Warranty does not cover labor costs.

24 Manufactured by: Quality Craft Industries Laval, QC, Canada H7C 0A (Monday Friday, 8:30 am 5 pm, EST) Made in China Form #: MPOD-0815

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

Worktop. Weight Capacity. 100 lbs. 21 Corner Worktop. 48 Worktop. Fits over 2 Cabinets. 72 Worktop. Fits over 3 Cabinets. 200 lbs. 150 lbs.

Worktop. Weight Capacity. 100 lbs. 21 Corner Worktop. 48 Worktop. Fits over 2 Cabinets. 72 Worktop. Fits over 3 Cabinets. 200 lbs. 150 lbs. Bold.0 Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping

More information

Install Instructions. NewAge Steel Welded Tall Locker

Install Instructions. NewAge Steel Welded Tall Locker Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x

More information

Performance 2.0 Series

Performance 2.0 Series Performance. Series Warning: Excessive weight hazard! Warning: Excessive weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave children

More information

Worktop INDEX eight Capacity Unpacking

Worktop INDEX eight Capacity Unpacking Pro.0 Series Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of

More information

STOP. Performance Plus 2.0 Series. hazard! ATTENTION: Is your cabinet damaged?

STOP. Performance Plus 2.0 Series. hazard! ATTENTION: Is your cabinet damaged? Performance Plus. Series Warning: Excessive Warning: Excessive weight hazard! weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave

More information

UNIVERSAL STAND. Owner s Manual. Visit us on the web at QUESTION Model No. UT1002

UNIVERSAL STAND. Owner s Manual. Visit us on the web at   QUESTION Model No. UT1002 Owner s Manual Model No. UT1002 UNIVERSAL STAND QUESTION... 1 877 393 7121 Visit us on the web at www.southerntechllc.com You will need this manual for safety instructions, operating procedures, and warranty.

More information

HOME BAR SERIES 3 DRAWER BASE STOP. Warning: Excessive weight hazard! ATTENTION: Is your cabinet damaged?

HOME BAR SERIES 3 DRAWER BASE STOP. Warning: Excessive weight hazard! ATTENTION: Is your cabinet damaged? HOME BAR SERIES 3 DRAWER BASE Warning: Excessive weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets.

More information

HOME BAR SERIES 3 DRAWER BASE

HOME BAR SERIES 3 DRAWER BASE HOME BAR SERIES 3 DRAWER BASE Warning: Excessive weight hazard! Use two or more people to move, assemble or install wine cabinets to avoid back injury. Do not leave children unattended near cabinets. High

More information

MANCHESTER VANITY BASE

MANCHESTER VANITY BASE MANCHESTER VANITY BASE INSTALLATION INSTRUCTIONS Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday or e-mail: contactus@magickwoods.com. Models:

More information

Install Instructions READ THIS FIRST BEFORE UNPACKING CABINET WARNING: WARNING: Do not leave children unattended near cabinets.

Install Instructions READ THIS FIRST BEFORE UNPACKING CABINET WARNING: WARNING: Do not leave children unattended near cabinets. 24 age Steel RTA tool Cabinet RAD THIS IRST BOR UNPACKIN CABINT If you are having difficulty with the tool drawer assembly please view this installation video at www.newageproducts.com/tooldrawerinstall

More information

Video Wall Installation Instructions 2W X 3H, 3W X 3H

Video Wall Installation Instructions 2W X 3H, 3W X 3H Video Wall Installation Instructions 2W X 3H, 3W X 3H www.microndisplaysolutions.com Table of Contents Important Safety Instructions... 3 Configuration... 4 Package Contents, included and optional items...

More information

Hardware Box 1 1/4 Diameter x 3/4 Long Bolts 24 1/4 Nylon Lock Nut 24 1/4 Diameter x 3 Long Lag Bolt 8 1/4 Washers 56

Hardware Box 1 1/4 Diameter x 3/4 Long Bolts 24 1/4 Nylon Lock Nut 24 1/4 Diameter x 3 Long Lag Bolt 8 1/4 Washers 56 Warning: Excessive weight hazard! Use two or more people to move, assemble or install overhead rack to avoid back or other injury. Do not leave children unattended near overhead rack. High risk of injury

More information

HAINSWORTH WRITING DESK ASSEMBLY INSTRUCTIONS

HAINSWORTH WRITING DESK ASSEMBLY INSTRUCTIONS Item# BP-HSWD52-W8 HAINSWORTH WRITING DESK ASSEMBLY INSTRUCTIONS IF PARTS ARE MISSING OR DAMAGED, DO NOT RETURN TO STORE To order missing or replacement parts, contact us via e-mail parts@officestar.net,

More information

Models 2230 and 2240

Models 2230 and 2240 Models 2230 and 2240 Overview... 2 Tools Needed... 2 Hardware...3 Assembly... 4-13 Installation... 14 Drawer Removal... 15 Operation... 15 Maintenance... 15 Accessories... 16 Limited Warranty... 16 Perform

More information

Single Arm Pole Mount. Installation Manual Edition v1.01. For models: UNI-SA/14 UNI-SA/21.5 UNI-SA/26 UNI-SA01-MAN

Single Arm Pole Mount. Installation Manual Edition v1.01. For models: UNI-SA/14 UNI-SA/21.5 UNI-SA/26 UNI-SA01-MAN Pole Mount Installation Manual 2016 Edition v1.01 For models: UNI-SA/14 UNI-SA/21.5 UNI-SA/26 UNI-SA01-MAN Table of Contents 1 1 2 3 4 5 5 Introduction Customer Support Project Essentials Assembly: Steps

More information

Vanity top, faucet and drain not included. 1-3/8 screws (x 2) (for middle and bottom drawers) Knobs (x 5)

Vanity top, faucet and drain not included. 1-3/8 screws (x 2) (for middle and bottom drawers) Knobs (x 5) ASHWELL VANITY BASE INSTALLATION INSTRUCTIONS Nutmeg models: 30176, 30177, 30178, 30179 Dark chocolate models: 30183, 30184, 30185, 30186 Gray models: 30190, 30191, 30192, 30193 Matte white models: 30197,

More information

Installation Manual Tilt Leg

Installation Manual Tilt Leg Installation Manual Tilt Leg Solar Mounting Solutions March www.ironridge.com 2010 IronRidge, Inc. All Rights Reserved Version 2.0 2 Tilt Leg Installation Guide Introduction The Tilt Leg is a flexible

More information

Installation Manual. Tamarack Solar Products. Top of Pole Mount Edition v1.01. For models:

Installation Manual. Tamarack Solar Products. Top of Pole Mount Edition v1.01. For models: Mount Installation Manual 2016 Edition v1.01 For models: UNI-TP/06 UNI-TP/06LL UNI-TP/08 UNI-TP/08LL UNI-TP/10 UNI-TP/10LL UNI-TP/12 UNI-TP/12LL UNI-TP02-MAN Table of Contents 1 Introduction 1 2 Customer

More information

Base Cabinet w/drawers

Base Cabinet w/drawers Base Cabinet w/drawers WSBC-4C Dark Cherry finish WSBC-4W White finish ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED Pacific Standard Time: 8:30 a.m.

More information

Tilting Flat Panel Wall Mount Installation Guide

Tilting Flat Panel Wall Mount Installation Guide Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees

More information

Contents 2. Warranty. Assembly Instructions. Lack of original receipt will void warranty.

Contents 2. Warranty. Assembly Instructions. Lack of original receipt will void warranty. Contents 2 Warranty 15 Page #3 Page #4 Page #5 Page #7 Page #13 Introduction Getting Started Parts List Assembly Instructions Warranty Exclusion: Damage caused by acts of nature Wind damage Failure caused

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Models 2130 and 2140

Models 2130 and 2140 Models 2130 and 2140 Overview... 2 Tools Needed... 2 Hardware... 2 Assembly... 3-10 Installation...11 Operation... 11 Maintenance... 12 Accessories...12 Limited Warranty... 12 Printed in USA 2007 Perform

More information

Models 2130 and 2140

Models 2130 and 2140 Models 2130 and 2140 Overview... 2 Tools Needed... 2 Hardware... 2 Assembly... 3-10 Installation...11 Operation... 11 Maintenance... 12 Accessories...12 Limited Warranty... 12 Perform the following sequence

More information

Steele TV Stand Stock # BH

Steele TV Stand Stock # BH LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

More information

Models 2030 and 2040

Models 2030 and 2040 Models 2030 and 2040 Overview... 2 Tools Needed... 2 Hardware... 2 Assembly... 3-8 Installation... 9 Operation... 9 Maintenance... 10 Accessories... 10 Limited Warranty... 10 Document # 101290 0607 Printed

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Workbench Model: GR 1902 (Tan) Dimensions (D x W x H): 24 x 48 x 60 GR1902B (Black) For Instruction Assistance (800) 736-7225 WEEKDAYS: 8:00 a.m. - 5:00 p.m. Pacific Standard Time

More information

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /

More information

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return this item to the retailer.

More information

Desk/Wall-Mount Rack

Desk/Wall-Mount Rack Desk/Wall-Mount Rack Patent(s) Pending Installation Instructions Post P/N: 119-1752 119-1781 119-1782 119-4014 Frame P/N: 119-1591 119-1754 119-1755 Kit Contents (2) Frames (4) Posts Assembly Hardware

More information

COMPETITOR CB-610 STANDARD BENCH

COMPETITOR CB-610 STANDARD BENCH NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice COMPETITOR CB-610 STANDARD BENCH Hardware Identifier Assembly Instruction Exploded Diagram Parts List

More information

VAN STORAGE SOLUTIONS FOR THE WAY YOU WORK

VAN STORAGE SOLUTIONS FOR THE WAY YOU WORK WWW.WEATHERGUARD.COM VAN STORAGE SOLUTIONS FOR THE WAY YOU WORK Weather Guard / KNAACK 420 E. Terra Cotta Ave. Crystal Lake, IL 60014 USA 800-456-7865 (Toll Free) 800-334-2981 (Fax) Knaack.OrderEntry@wernerco,.com

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8266

More information

Installation Manual XRL Solar Rail System

Installation Manual XRL Solar Rail System Installation Manual XRL Solar Rail System Solar Mounting Solutions June 2009 www.ironridge.com 2009 IronRidge, Inc. All Rights Reserved Version 1.0 2 XRL Solar Rail System Installation Guide Introduction

More information

COMPETITOR WM-203 COMBO BENCH

COMPETITOR WM-203 COMBO BENCH NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier COMPETITOR WM-203 COMBO BENCH Assembly Instruction Exploded Diagram Parts List

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone:

More information

INSTALLATION INSTRUCTIONS Scout II - Fast Trac PART #

INSTALLATION INSTRUCTIONS Scout II - Fast Trac PART # INSTALLATION INSTRUCTIONS Scout II - Fast Trac PART #442-210 Thank you for purchasing Specialty s Convertible Top for your Scout vehicle. It has been designed for great fit and long wear. Please read and

More information

HEAVY DUTY 11 STEEL CABINET

HEAVY DUTY 11 STEEL CABINET HEAVY DUTY STEEL CABINET ASSEMBLY INSTRUCTIONS ONE DRAWER BASE CABINET 05-206 Parts List Part No Description Qty Image ONE DRAWER BASE CABINET Part No Description Qty Image SB- Cabinet Body EH-0 Euro Hinge

More information

Installation Manual. Tamarack Solar Products. Side of Pole Mount Edition v1.02. For models:

Installation Manual. Tamarack Solar Products. Side of Pole Mount Edition v1.02. For models: Mount Installation Manual 2016 Edition v1.02 For models: UNI-SP/01 UNI-SP/01A UNI-SP/01XH UNI-SP/01XX UNI-SP/02 UNI-SP/02A UNI-SP/02X UNI-SP/03 UNI-SP01-MAN Table of Contents 1 Introduction 1 Customer

More information

MARCY CLASSIC MCB-252 COMBO BENCH W/120 lbs Weight Set

MARCY CLASSIC MCB-252 COMBO BENCH W/120 lbs Weight Set NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction MARCY CLASSIC MCB-252 COMBO BENCH W/120 lbs Weight Set Exploded

More information

(800) Dimensions (D x W x H): 24Ó x 48Ó x 60Ó

(800) Dimensions (D x W x H): 24Ó x 48Ó x 60Ó Dimensions (D x W x H): 24Ó x 48Ó x 60Ó (800) 637-9508 www.theshelvingstore.com Gorilla Rack Products is a division of Rapid Rack Industries, Inc. 14421 Bonelli Street City of Industry, CA 91746 At Gorilla

More information

WORK BENCH. Owner s Manual. Visit us on the web at QUESTION Model No. MT4006

WORK BENCH. Owner s Manual. Visit us on the web at   QUESTION Model No. MT4006 Owner s Manual Model No. MT4006 WORK BENCH QUESTION... 1 847 780 6120 Visit us on the web at www.southerntechllc.com You will need this manual for safety instructions, operating procedures, and warranty.

More information

Menu Board Tilt or Fixed Mount Installation Instructions MDS1T-200, MDS1T-300, MDS1T-400 MDS2T-200, MDS2T-300, MDS2T-400 MDS3T-200, MDS3T-300, MDS3T-400 MDS4T-200, MDS4T-300, MDS4T-400 MDS5T-200, MDS5T-300,

More information

INDUSTRIAL WORKBENCH

INDUSTRIAL WORKBENCH ASSEMBLY INSTRUCTIONS & PARTS MANUAL #129060 INDUSTRIAL WORKBENCH Tennsco Corp., Dickson, TN 3706-1888 * (61) 6-8000 READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE YOUR Tennsco INDUSTRIAL WORKBENCH.

More information

INSTALLATION INSTRUCTIONS JEEP SCRAMBLER FAST TRAC TOP PART #108-21X

INSTALLATION INSTRUCTIONS JEEP SCRAMBLER FAST TRAC TOP PART #108-21X INSTALLATION INSTRUCTIONS JEEP SCRAMBLER FAST TRAC TOP PART #108-21X Thank you for purchasing Specialty s Convertible Top for your Jeep vehicle. It has been designed for great fit and long wear. Please

More information

2 ADULTS REQUIRED FOR ASSEMBLING

2 ADULTS REQUIRED FOR ASSEMBLING 2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your

More information

Installation Instructions. Monitor Roll Stand

Installation Instructions. Monitor Roll Stand Installation Instructions Monitor Roll Stand w w w. a m i c o. c o m Preface Important, Please Read Carefully Thank you for your purchase with Amico. This unit is designed for long lasting performance,

More information

FP-4855 Flat Panel Television Stand ASSEMBLY INSTRUCTIONS

FP-4855 Flat Panel Television Stand ASSEMBLY INSTRUCTIONS FP-4855 Flat Panel Television Stand ASSEMBLY INSTRUCTIONS Patent Pending Italian Designed A Product of China Do not discard these instructions M-1_051607v3 Bell O International Corp. will not be responsible

More information

OWNER S MANUAL. Distributed by ASLI, 1011 Centre Road, Wilmington, DE Tools Required: Allen Wrench

OWNER S MANUAL. Distributed by ASLI, 1011 Centre Road, Wilmington, DE Tools Required: Allen Wrench Tools Required: Adjustable Wrench Allen Wrench OWNER S MANUAL Retain This Manual For Reference Distributed by ASLI, 1011 Centre Road, Wilmington, DE 19805 TABLE OF CONTENTS BEFORE YOU BEGIN..... 1 IMPORTANT

More information

Tilting, Swiveling & Rotating Flat Panel Wall Mount

Tilting, Swiveling & Rotating Flat Panel Wall Mount Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical

More information

INSTALLATION INSTRUCTIONS CJ-5 M38A PART # With Doors

INSTALLATION INSTRUCTIONS CJ-5 M38A PART # With Doors INSTALLATION INSTRUCTIONS CJ-5 M38A1 1955-1975 PART #109-011 With Doors Thank you for purchasing Specialty s Convertible Top for your Jeep vehicle. It has been designed for great fit and long wear. Please

More information

Please Do Not Return This Product To The Store!

Please Do Not Return This Product To The Store! MODEL NOS. T81 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step.. Some smaller parts may be shipped inside

More information

Expandable Bar Cabinet CF4001

Expandable Bar Cabinet CF4001 Expandable Bar Cabinet CF4001 Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details.

More information

Assembly & Installation Instructions

Assembly & Installation Instructions Wall Mount Garden Hose Reel Model 1041 Assembly & Installation Instructions 1 2 3 4 5 6 8 9 10 12 15 7 11 10 16 17 13 14 CONTENTS QUESTIONS? PROBLEMS? Please DO NOT contact or return this item to the retailer.

More information

M ACS Instructions

M ACS Instructions APPLICABLE MODELS: Nissan Frontier 2005 and up short bed with Utili-Trak mounting rails PACKAGE CONTENTS 00-0060-M-01-1205 ACS Instructions Leitner Designs 25675 Taladro Circle Unit E Mission Viejo, CA

More information

Outdoor Water Solutions, Inc. 9 Backyard Windmill. Installation Manual

Outdoor Water Solutions, Inc. 9 Backyard Windmill. Installation Manual Outdoor Water Solutions, Inc. 9 Backyard Windmill Installation Manual Customer Service: -866-7-6 Website: www.outdoorwatersolutions.com Springdale, Arkansas 72762 Phone: -866-7-6 Fax: (79) 750-978 Thank

More information

OWNER S MANUAL. Sears Kendall 6PC Dining Set * Swivel Rocker. Product Code:D71 M80917 UPC Code: Date of Purchase: / /

OWNER S MANUAL. Sears Kendall 6PC Dining Set * Swivel Rocker. Product Code:D71 M80917 UPC Code: Date of Purchase: / / OWNER S MANUAL Sears Kendall 6PC Dining Set * Swivel Rocker Product Code:D71 M80917 UPC Code: 7-22938-07967- Date of Purchase: / / If you have any problems with this product, DO NOT RETURN IT TO THE STORE.

More information

INSTALLATION INSTRUCTIONS Super Scout PART #

INSTALLATION INSTRUCTIONS Super Scout PART # INSTALLATION INSTRUCTIONS Super Scout 71-80 PART #443-010 Thank you for purchasing Specialty s Convertible Top for your Scout vehicle. It has been designed for great fit and long wear. Please read and

More information

Assembly Instructions & User s Manual 6 Piece Folding Dining Set FSMVPT2084

Assembly Instructions & User s Manual 6 Piece Folding Dining Set FSMVPT2084 & User s Manual 6 Piece Folding Dining Set FSMVPT2084 Please keep this instruction manual for future reference Customer Service: (888) 922-2336 7:00 am to 12:00 am CST (daily) Live Chat at: www.academy.com

More information

Sunset Swings By Health in Motion, LLC

Sunset Swings By Health in Motion, LLC Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 11/6/2009 421 Owners Assembly and Operation

More information

P4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels

P4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels Low-Profile Tilting Portrait Mount for Flat-Panels 1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: 175 lbs. Warning Statements THE WALL STRUCTURE MUST BE CAPABLE

More information

Owner s Manual AE PLUG AERATOR MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV

Owner s Manual AE PLUG AERATOR MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual AE-48 48 PLUG AERATOR IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Made In CHINA

More information

LSP inc. READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY

LSP inc. READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY LSP inc. Canopy Frame Owner s Manual 14AF64 14' Canopy Frame LS311 bent tube bundle 14' LS321 rail bundle 14' LS310 leg bundle 16AF64 16' Canopy Frame LS311 bent tube bundle 14' LS321 rail bundle 14' LS310

More information

MFJ-1835K34 40,30 METER ADD ON KIT FOR THE MFJ-1835 COBWEB ANTENNA INSTRUCTION MANUAL. CAUTION: Read All Instructions Before Operating Equipment

MFJ-1835K34 40,30 METER ADD ON KIT FOR THE MFJ-1835 COBWEB ANTENNA INSTRUCTION MANUAL. CAUTION: Read All Instructions Before Operating Equipment MFJ-1835K34 40,30 METER ADD ON KIT FOR THE MFJ-1835 COBWEB ANTENNA INSTRUCTION MANUAL CAUTION: Read All Instructions Before Operating Equipment 300 Industrial Park Road Starkville, MS 39759 USA Tel: 662-323-5869

More information

Digital Menu Board Ceiling Mount Installation Instructions

Digital Menu Board Ceiling Mount Installation Instructions Digital Menu Board Ceiling Mount Installation M2T4249C M3T4249C www.microndisplaysolutions.com Table of Contents Important Safety... 3 Models and Specifications... 4 Package Contents... 5 Step 1 Using

More information

KEEP FOR FUTURE REFERENCE STOWAWAY TILT TABLE READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS TABLE

KEEP FOR FUTURE REFERENCE STOWAWAY TILT TABLE READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS TABLE KEEP FOR FUTURE REFERENCE INSTRUCTIONS International Version P.O. Box 368 908 West Main Laurel, MT USA 59044 phone 800-548-7341 phone 406-628-8231 fax 406-628-8354 MODEL NUMBER: STT1 SERIAL NUMBER: (please

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Premier Mounts Tilting Wall Mount Model: TWM-085 For use with Panasonic 85 Flat Panel NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700

More information

Installation Manual. Side of Pole Mount Edition v1.02. For models:

Installation Manual. Side of Pole Mount Edition v1.02. For models: Side of Pole Mount Installation Manual 2015 Edition v1.02 For models: UNI-SP/01 UNI-SP/01A UNI-SP/01XH UNI-SP/01XX UNI-SP/02 UNI-SP/02A UNI-SP/02X UNI-SP/03 UNI-SP01-MAN Installation Manual Side of Pole

More information

ADULT ASSEMBLY REQUIRED

ADULT ASSEMBLY REQUIRED ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if you are missing parts, do not return this item to the Retailer Store Please call our customer service number and have your instructions

More information

Portable System Owners Manual

Portable System Owners Manual Portable System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Adult Assembly Required. This manual, accompanied by sales receipt, should be saved and kept

More information

Owner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts.

Owner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts. Owner s Manual ODYSSEY BENCH MODEL O4100B shown 67-1375 REV 218 3730 E. Southern Avenue, Phoenix, AZ 85040 USA 800-778-8779 Workhorseproducts.com 1 Table of Contents I. Introduction & Safety Information.

More information

WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND

WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND SIMP II H O M E L I F E Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND 1/21 FOR REPLACEMENT PARTS OR HELP WITH ASSEMLY PLEASE CONTACT US AT: simpli-home.com/customer-support PLEASE ENSURE

More information

Half Door Installation Instructions

Half Door Installation Instructions Half Door Installation Instructions For: CJ5 (1955-1975), CJ6 (All), M38-A1 (1955-1971) Part Number: 53025 Congratulations on your purchasing decision. Bestop designed these Doors to give you years of

More information

OWNERS MANUAL. Part: A8002, A8003, A8004, A8005, A8006 A8102, A8103, A8104, A8105, A8106. GlowStep Revolution

OWNERS MANUAL. Part: A8002, A8003, A8004, A8005, A8006 A8102, A8103, A8104, A8105, A8106. GlowStep Revolution OWNERS MANUAL Part: A8002, A8003, A8004, A8005, A8006 A8102, A8103, A8104, A8105, A8106 GlowStep Revolution Version 13 BY: RS 6/23/16 TECH SUPPORT (800) 246-8132 Parts Inventory (Hardware in Bolt Kit)

More information

Installation Manual. Side of Pole Mount Edition v3.24. For models:

Installation Manual. Side of Pole Mount Edition v3.24. For models: Mount Installation Manual 2016 Edition v3.24 For models: UNI-SP/01 UNI-SP/01A UNI-SP/01XH UNI-SP/01XX UNI-SP/02 UNI-SP/02A UNI-SP/02X UNI-SP/03 UNI-SP/03W UNI-SP01-MAN Table of Contents 1 1 2 3 4 5 6 7

More information

Please Do Not Return This Product To The Store!

Please Do Not Return This Product To The Store! MODEL NOS. T8512 TOURNAMENT SERIES 3 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step. 2. Some smaller parts

More information

Mortising Attachment

Mortising Attachment Mortising Attachment Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

OWNER S MANUAL. Sears Peyton 5PC Bar Set. * Balcony Chair. Product Code: D71 M80911 UPC Code: Date of Purchase: / /

OWNER S MANUAL. Sears Peyton 5PC Bar Set. * Balcony Chair. Product Code: D71 M80911 UPC Code: Date of Purchase: / / OWNER S MANUAL Sears Peyton 5PC Bar Set * Balcony Chair Product Code: D71 M80911 UPC Code: 7-22938-07962-9 Date of Purchase: / / If you have any problems with this product, DO NOT RETURN IT TO THE STORE.

More information

OWNER S BAY WINDOW GAZEBO

OWNER S BAY WINDOW GAZEBO OWNER S MANUAL BAY WINDOW GAZEBO Caution: Carefully Read Instcrtuions and Proucedures for Safe Operation Product Code: D7 M809 KSN: 780-083636- UPC code: 868000503 Date of purchase: / / Warning:. When

More information

Ref# Description Qty(pc) 14 Phillips Head Screw,M6*10, Black Flanged Lock Nut,M6,Black 48

Ref# Description Qty(pc) 14 Phillips Head Screw,M6*10, Black Flanged Lock Nut,M6,Black 48 Operator s Instructions GARAGE STORAGE SOLUTIONS WALL CABINET Model: GWC3DP SKU: 211-4359 Safety Instructions and Cautions Use appropriate safety equipment when using power and hand tools. Failure to do

More information

Outdoor Water Solutions, Inc. Small Backyard Windmill. Installation Manual

Outdoor Water Solutions, Inc. Small Backyard Windmill. Installation Manual Outdoor Water Solutions, Inc. Small Backyard Windmill Installation Manual Customer Service: 1-866-471-1614 Website: www.outdoorwatersolutions.com Springdale, Arkansas 72764 Phone: 1-866-471-1614 Fax: 1-479-750-9178

More information

DOREL ASIA COUNTER HEIGHT DESK NEED HELP! Model No: WM3514 UPC CODE:

DOREL ASIA COUNTER HEIGHT DESK NEED HELP! Model No: WM3514 UPC CODE: DOREL ASIA COUNTER HEIGHT DESK Model No: UPC CODE: 0-65857-15762-8 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM

More information

Stop! Read This Important Information.

Stop! Read This Important Information. Stop! Read This Important Information. Stop, Do Not Proceed, Read This This door replacement kit is designed for the replacement of doors on a Supertop ONLY! This door will not work on any other style

More information

INSTALLATION INSTRUCTIONS Lateral Shift Accessory Model: PAC-800

INSTALLATION INSTRUCTIONS Lateral Shift Accessory Model: PAC-800 INSTALLATION INSTRUCTIONS Lateral Shift Accessory Model: PAC-800 The PAC-800 Lateral Shift Accessory is for use with Chief Model PSM, PST, PRO, PLP, Large Flat Panel Display wall mounts. It can be installed

More information

FreshSesh, PowderHound & Big PowderHound

FreshSesh, PowderHound & Big PowderHound FreshSesh, PowderHound & Big PowderHound Carrier (2x) universal mounting bracket (4x) SkiLift (2x) (mounting bracket parts:) Hex Key with Bolt (2x) SkiLift (2x) Button Head Screw (2x) Hex Wrench (1x) Base

More information

TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF

TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF DXST10000 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS

More information

Sunjoy L-BG014PST Boulevard Living Arch Design Steel Bridge. Owner s Manual IMPORTANT

Sunjoy L-BG014PST Boulevard Living Arch Design Steel Bridge. Owner s Manual IMPORTANT Sunjoy L-BG014PST Boulevard Living Arch Design Steel Bridge Owner s Manual IMPORTANT Thank you very much for choosing Sunjoy Group. Please take time to read these instructions thoroughly and follow each

More information

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY For Outdoor Use Only

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY For Outdoor Use Only ITEM#: FG-SNP4272TBL17 San Paulo 42 x72 Oval Dining Table IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY For Outdoor Use Only Customer Service E-Mail : customerservice@foremostgroups.com 8:30a.m.

More information

SawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL

SawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL SawStop T-GlideTM Fence System- Professional Series II OWNER S MANUAL Warranty SawStop warrants to the original retail purchaser of a new T-Glide Fence System - Professional Series II from an authorized

More information

TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF

TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF DXST4500 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS TECHNICAL

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS P4263F Universal Low Profi le Flat Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888

More information

Assembly Instructions

Assembly Instructions 1 BLT-27565 FDB Stand Assembly Instructions BLT-27565 FDB Stand Part Drawing Description Qty Part Drawing Description Qty P-1 Top Shelf 1 EA P-10 LL Lower Leg 1 EA P-11 Middle Shelf 1 EA P-2 L-Upper Leg

More information

Portable System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI U.S.A.

Portable System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI U.S.A. Portable System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Adult Assembly Required. This manual, accompanied by sales receipt, should be saved and kept

More information

PFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS

PFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS 9531-007-Z00-01 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Wood Stud Installation 5 Concrete Surface Installation

More information

BOUNCE TABLE TENNIS TABLE & ACCESSORIES ASSEMBLY INSTRUCTIONS

BOUNCE TABLE TENNIS TABLE & ACCESSORIES ASSEMBLY INSTRUCTIONS BOUNCE TABLE TENNIS TABLE & ACCESSORIES ASSEMBLY INSTRUCTIONS NG2325 THANK YOU! Thank you for your purchase of our product. We work around the clock and around the globe to ensure that our products maintain

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS AVSC-2123 Audio Video System ASSEMBLY INSTRUCTIONS PATENT PENDING FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS:! ALWAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE ASSEMBLED

More information

NOVA-EXT Versatile Projector Mount Model: NOVA-EXT

NOVA-EXT Versatile Projector Mount Model: NOVA-EXT INSTALLATION MANUAL NOVA-EXT Versatile Projector Mount Model: NOVA-EXT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 Other Locations

More information

8150 Variable-Height Keyboard Slide

8150 Variable-Height Keyboard Slide Note: Rockler may not carry all products and/or sizes listed in this vendor's publication KNAPE 8150 Variable-Height Keyboard Slide KV 8150 Major Dimensions and Mounting Hole Locations 12" - 24837 14"

More information

ASSEMBLY INSTRUCTIONS FOR HAULER II UNIVERSAL CAMPER SERIES RACKS

ASSEMBLY INSTRUCTIONS FOR HAULER II UNIVERSAL CAMPER SERIES RACKS ASSEMBLY INSTRUCTIONS FOR HAULER II UNIVERSAL CAMPER SERIES RACKS C11U2873-1 shown above Package Contents: HARDWARE KIT PARTS (4) 3/8-16 x 3 CARRAIGE BOLTS (1) RAIL DRIVER S SIDE ASSEMBLY (20) 3/8-16 x

More information