DTM Collection 04 / 2018 Publication date

Transcription

1 Versin histry: VEGA DTM Cllectin DTM Cllectin 04 / 2018 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 5.0 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 04/2018, keep in mind that yu shuld have the actual versin PACTware TM 5.0 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws 7, Windws 8 as well as Windws 10. This applies als t the included PACTware 5.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 5.0 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 r 3.5 and must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 r Windws 10 envirnments hwever additinal interventins by the administratr are required (see Release Ntes in the directry VEGA DTM f the DVD)

2 Versin histry: VEGA DTM Cllectin New functins PLICSMOBILE Frm device sftware 1.1.0, PLICSMOBILE ffers the fllwing additinal functins: New ptin "Cmbi peratin fr pwer saving mde Accumulatr status t trigger events Allw/blck remte parameter adjustment Electrnics exchange The setting f this new functin is nw als supprted by the DTM. VEGA Bluetth DTM The cmmunicatin DTM fr adjustment f VEGA instruments via Bluetth was extended by the fllwing functins. Supprt f n-bard Bluetth LE (frm PLICSCOM 1.13) Supprt f the imprved device search (frm PLICSCOM 1.13) Language selectin The adjustment surface f all DTMs can nw als be switched ver t Turkish language. The switch ver has als effect n the VEGA DataViewer. Test license In the "Inf n" dialgue f the VEGA DTMs there is nw the pssibility t activate a temprary test license as full versin. The activatin is valid nce fr 90 days. Parameter page "Inf With HART sensrs, the inf page shws yu nw in which mde the current utput wrks. Parameter page "Current utput (adjustment) The parameter page was replaced by "PV adjustment. Service recrding T cmpensate a time ffset in the service recrdings between the real time clck f the VEGA sensrs and the clck n the PC/laptp the DTMs were extended as fllws: All time stamps will be crrected t reference time (PC/laptp) All time stamps are stred in UTC Prject assistant the prject assistant was ptimized in the fllwing pints fr the search fr the fllwing Bluetth instruments: The list f the fund instruments will be already displayed with the first match. The list will then be successively extended by further matches. Selectin and cnnectin t a fund instrument in the list is always pssible. The search is running until at least ne instrument was selected

3 Versin histry: VEGA DTM Cllectin The infrmatin t the fund instruments was revised. Bluetth instruments already used by ther users will be marked. myvega Client With the myvega Client an active service is available in the backgrund supprting yu while wrking with the VEGA DTMs. The myvega Client takes ver the fllwing tasks: Lcal management f all access cdes f yur VEGA instruments Exchange f the access cdes via the myvega accunt with ther adjustment instruments VEGA DataViewer The fllwing functins were revised: Lcalizatin f time infrmatin: The VEGA DataViewer presents nw time infrmatin n yur device data with the time zne suitable fr yur lcatin. Device list: The device list was ptimized t make the adjustment mre intuitive. Multiple chice will be mre clear by checkbxes and reference texts The selectin in the device list is determining fr dwnstream activities. Dwnstream activities are fr example: Uplading Dwnlading Exprting device data Imprting DTM recrdings: The prcedure fr the imprt f DTM recrdings via Drag&Drp was crrected. VEGA DataViewer nw als infrms the user in which areas a file can be stred. View "Measured values": The display f measured value curves was revised in the fllwing pints: The lading times fr lng recrdings were reduced. Depending n the data vlume t the laded, the curves will be shwn as measured value bands

4 Versin histry: VEGA DTM Cllectin The fllwing errrs were remved VEGACONNECT 4 The DTM fr VEGACONNECT 4 supprts nw als the idtms f Messrs. Cdewrights. VEGAMET The DTMs fr adjustment f the series 600 VEGAMETs were crrected: In the DTM fr VEGAMET 625 the errr while creating a pressurized vessel was remved. In the setup assistant there were smetimes presentatin prblems n cmputers with smaller screen. PROTRAC In the DTM fr PROTRAC the fllwing errrs were remved: Malfunctin while creating an autmatic real value crrectin via MGC In the DTM data file the infrmatin n MGC instruments and the participant list were missing PLICSMOBILE The fllwing crrectins were carried ut n the PLICSMOBILE DTM: Errr while creating a measurement lp fr PROTRAC was remved Triggering a test transmissin fr defined events was simplified Minr adaptins in the assistant t define events VEGABAR 80 In the DTM fr VEGABAR 80 the measured values in mbar will be nw displayed with 2 psitins after the cmma. VEGAPULS 64/69 The fllwing prblems were remved in the DTM fr VEGAPULS 64/69: It is nw pssible t delete false signal entries. If "mm" was adjusted as unit, this was nt pssible. Sme texts were cut with language selectin "Spanish" and "French". The imprt f a PUL3 file via the HART cnnectin blcked with VEGAPULS 64 HART. VEGA prject assistant Device type VEGASON S 61 was nt recgnized with the device search. VEGA DataViewer The fllwing revisins were remved: Upright/landscape frmat with newly attached images is detected autmatically. Terminating the service recrding nw functins als when the strage size f the VEGA DataViewer database is exceeded. Deadlck while restarting the DataSystem with activated grupings was remved

5 Versin histry: VEGA DTM Cllectin In the view "Measured values", yu will be infrmed via the axis label if there are n curves available fr the actually selected time sectin. While generating a sensr dcumentatin frm DTM data files, als infrmatin is displayed which are nly visible in the DTM with service lgin. The exprt f data sets via the device list functins again. The cuntry list in the dialgue "Edit features" appears nw srted

6 Versin histry: VEGA DTM Cllectin DTM Cllectin 07 / 2017 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 5.0 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 07/2017, keep in mind that yu shuld have the actual versin PACTware TM 5.0 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws 7, Windws 8 as well as Windws 10. This applies als t the included PACTware 5.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 5.0 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 r Windws 10 envirnments hwever additinal interventins by the administratr are required (see Release Ntes in the directry VEGA DTM f the DVD)

7 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: VEGADIF 80 series DTM Use this DTM, if yu want t perate sensrs f type VEGADIF 85. PLICSMOBILE 80 series DTM This DTM replaces the previus PLICSMOBILE T81 DTM. The new DTM can be used fr the integrated but als fr the remte versin f PLICSMOBILE. Display f Device Revisin The parameter page "Inf" cntains nw the Device Revisin assigned fr the cnnected instrument. Service recrding Frm nw n, the functin "Open service flder" is lcked during the service recrding. PLICSMOBILE While creating events it is nw als pssible t send a status file as attachment. Under "Diagnsis" nw als the actual IP address is displayed. Fr PLICSMOBILE an errr is nw displayed as lng as n measurement lp was generated fr the instrument. VEGA DataViewer The fllwing functins were revised: Device list: The clumns "Serial number", "Device TAG" and "Device type" can nw be faded in and faded ut All clumn psitins are nw saved The quick search acc. t the categry "Cuntry" is nw carried ut via a selectin list Menu bar: Names f different menu items fr the sectins "Events", "Dcuments" and "DTM data files" were revises

8 Versin histry: VEGA DTM Cllectin The fllwing errrs were remved Linearizatin assistant fr plics plus sensrs While checking the values in the calculatin assistant, the adjustment values were reset t default. Nw a reset is nly carried ut if at least ne entry field was mdified. VEGAMET The prblem is slved that after activatin f the pump change-ver functin this mde culd nt lnger be changed. PROTRAC After a sftware update t a versin > 2.0 the cnnectin via DTM is n lnger pssible in sme cases. The errr is remved. The errr is remved that under certain cnditins during imprt nt all linearizatin pints are taken ver int the instrument. The errr is remved that in sme cases n Nrwegian Windws the adjustment table was nt taken ver. VEGABAR 80 New errr cdes were cmpleted in the nline help. With VEGABAR 80 fr Fundatin Fieldbus the DTM cnfiguratin page was deleted. Sme errr texts had t be cmpleted in the event memry. VEGAFLEX 80 Sme errr texts had t be crrected in the event memry. VEGAPULS WL 61 and WL S61 Fr flw measurements the errr handling while entering flume dimensins which are nt cnfrm t standard are nw treated with mre tlerance. The ptin t enter a flw measurement via the linearizatin assistant was deleted. fdtcontainer 4 Errr while scanning plics sensrs fr HART was remved. The sensrs are nw als identified crrectly in the fdtcontainer The identificatin f PLICSMOBILE T81 nw functins crrectly. PLICSMOBILE After a sftware update, the reset was lcked in sme cases. The errr was remved. Acc. t the definitin f the measurement lp it culd happen that the display f the cmmunicatin statistics was missing. The errr was remved. The parameter mdificatin memry registers nw nly actually mdified parameters

9 Versin histry: VEGA DTM Cllectin While imprting, nw als the status fr the used encryptin with the transmissin is taken ver. VEGA prject assistant In certain cnstellatins there were prblems while creating a list "Limit netwrk search" n Chinese Windws. The errr was remved. VEGA DataViewer The fllwing errrs were remved: View "Ech curve": Cutting f ech curves is nw pssible. Srting acc. t "Size" was wrng. The errr was remved

10 Versin histry: VEGA DTM Cllectin DTM Cllectin 03 / 2017 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 5.0 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 03/2017, keep in mind that yu shuld have the actual versin PACTware TM 5.0 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws 7, Windws 8 as well as Windws 10. This applies als t the included PACTware 5.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 5.0 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and 4.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 r Windws 10 envirnments hwever additinal interventins by the administratr are required (see Release Ntes in the directry VEGA DTM f the DVD)

11 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: PLICSMOBILE T81 DTM With this DTM yu have the pssibility f the wireless peratin fr the Gateway PLICSMOBILE T81 as well as via Bluetth and mbile phne cnnectin. Release/lck adjustment After releasing the adjustment yu have nw the pssibility t stre the PIN fr future cnnectins. VEGA DataViewer The fllwing functins were revised: In the view "Infrmatin" yu can nw add a pht fr each instrument. The functin "Imprt frm device" was deleted The fllwing errrs were remved Electrnics exchange VEGAFLEX 80 SIL The false signal suppressin within the electrnics exchange assistant is functining again Service recrding The verificatin after electrnics exchange is pssible again The functin t check if the strage lcatin fr the recrding data can be reached, was imprved. With instruments f the VEGAFLEX 60 series, the false signal suppressin was n lnger displayed, the errr is nw remved. Cnnecting With the instruments f the plics plus generatin it is nw checked if sensr and DTM type are matching. A respective message will be displayed in case f errr. PROTRAC In the exprted data, yu nw have als the infrmatin f the backgrund lighting. VEGABAR 80 (4 20 ma) Sme parameter changes caused errr messages while taking ver data int the sensr. The errr is remved. VEGA DataViewer The fllwing errrs were remved: Use f the nte functins is nw als pssible in the analysis windws

12 Versin histry: VEGA DTM Cllectin DTM Cllectin 12 / 2016 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 5.0 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 10/2016, keep in mind that yu shuld have the actual versin PACTware TM 5.0 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws 7, Windws 8 as well as Windws 10. This applies als t the included PACTware 5.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 5.0 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and 4.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 r Windws 10 envirnments hwever additinal interventins by the administratr are required (see Release Ntes in the directry VEGA DTM f the DVD)

13 Versin histry: VEGA DTM Cllectin New functins VEGABAR 80 - DTM (HART SIL, Prfibus and FF) The DTM ffers the fllwing extensins fr all instrument versins frm instrument sftware 1.3.0: Extended adjustment pssibilities in the sectin "Psitin crrectin" with applicatin "Density-cmpensated level" VEGAFLEX 80 DTM (HART SIL, Prfibus and FF) The DTM ffers the fllwing extensins fr all instrument versins (Prfibus and HART SIL frm instrument sftware r HART and FF frm instrument sftware 1.3.0): Additinal adjustment pssibilities in the sectin "Display" fr definitin f the display frmat. Simplified adjustment pssibilities in the sectin "Adjustment" and "Scaling" with the applicatin "Interface measurement". Reduced adjustment pssibilities in the sectin "Applicatin" fr bulks slids with dielectric cnstant <1.5. VEGAPULS 69 FF The DTM supprts nw als the electrnics exchange. Fixed-term full versin VEGA DTMs can nw be used as a fixed-term full versin withut buying the full versin f the DTM Cllectin. With the s called service license, the fixed-term full versin can be activated with a perid f validity f 90 days. Due t the later installatin f a "real" full versin, the status will be changed t permanent full versin. Nte functin The VEGA DTMs ffer nw the pssibility t enter ntes during a service recrding. The nte functin ffers the fllwing features: The functin fr entering a nte is pened via the DTM tlbar and is hence independent f the actually pen parameter page. The ntes are autmatically prvided with a time stamp. While terminating the service recrding, the ntes are passed n the the VEGA DataViewer (nly with full versin). VEGA DataViewer The fllwing functins were revised: The adjustment f the VEGA DataViewer is nw als pssible with pen nte dialgue

14 Versin histry: VEGA DTM Cllectin By clicking the muse t a nte line within the nte dialgue, yu are mved t the suitable ech curve r the suitable psitin f the measured value curve within the VEGA DataViewer. The fllwing errrs were remved PROTRAC The fllwing errrs were remved: Sme translatins in the sectin special parameters were crrected. Imprt f data f an instrument with instrument sftware <2.0 in an instrument with instrument sftware 2.0 and higher is nw pssible. Linearizatin tables cntaining cunt rates which are nt identical, are nw taken ver crrectly. The indicatin f the switching pints and integratin time nw als functins with POINTRAC 31 SIL VEGASON S The instrument search finds nw als instruments f type VEGASON S. Peak values in diagnstic page The peak values in the diagnstic page f plics sensrs are nw displayed crrectly Electrnics exchange via Bluetth The electrnics exchange via Bluetth cntains certain risks. The menu item was hence deleted in the DTMs. VEGABAR 80 The tw special parameters (8) and (9) were nt taken ver crrectly during the imprt. The errr is remved nw. VEGA DataViewer The fllwing errrs were remved: Ntes can be nw als displayed in the analysis windws Translatin errrs while creating a sensr dcumentatin in Russian language

15 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2016 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 5.0 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus Cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 10/2016, keep in mind that yu shuld have the actual versin PACTware TM 5.0 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws 7, Windws 8 as well as Windws 10. This applies als t the included PACTware 5.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 5.0 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and 4.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 r Windws 10 envirnments hwever additinal interventins by the administratr are required (see ReleaseNtes in the directry VEGA DTM f the DVD)

16 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: VEGAPULS WL S 61 DTM fr VEGAPULS WL S 61 (with integrated Bluetth mdule) Bluetth Mdule DTM With this DTM wireless adjustment f VEGAPULS WL S 61 and VEGAPULS WL 61 (with ptin Bluetth) as well is pssible

17 Versin histry: VEGA DTM Cllectin DTM Cllectin 06 / 2016 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 5.0 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus Cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 06/2016, keep in mind that yu shuld have the actual versin PACTware TM 5.0 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws 7, Windws 8 as well as Windws 10. This applies als t the included PACTware 5.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 5.0 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and 4.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 r Windws 10 envirnments hwever additinal interventins by the administratr are required (see ReleaseNtes in the directry VEGA DTM f the DVD)

18 Versin histry: VEGA DTM Cllectin New functins Service recrding The service recrding was revised. Mdificatins f the fllwing pint were carried ut: If the service recrding was interrupted due t an perating errr, then the lst data can be saved with a restart f the service recrding. Sensr dcumentatin Fr safety reasns, the PIN is n lnger displayed in the sensr dcumentatin. VEGA prject assistant The prject assistant was extended in respect t the fllwing pints: With the actual DTMs, a VEGA prject assistant fr PACTware 5.0 is supplied fr the first time. In the dialgue "Limit netwrk search" nw als the serial number and TAG f the fund sensrs appear while searching via Bluetth. The ptin "Place instruments nline" was remved PROTRAC DTMs The fllwing adaptatins relating t the adjustment philsphy were carried ut: The functin "Unlck/lck adjustment" is nw handled via an assistant. Fr the display indicatin, nw the display frmat (psitins after the decimal pint) can be adjusted The measurement lp name displayed with FF instruments can nw be changed in the DTM and it is displayed in the prject windw f PACTware instead f the PD TAG. The DTMs supprt nw the new instrument firmware frm versin 2.0. This cncerns mainly: Cncept f the cmmunicatin and functin master Functin "NORM cmpensatin Functin "Autmatic zer rate Functin "Autmatic real value crrectin" Extensins with the applicatin "Limit level" and "Real value crrectin Slave" VEGADIS 82 DTM The functin extensins f VEGADIS 82 (frm versin 1.10) were integrated: Extensins f the parameter page "Display" Extensin f the adjustable languages t Japanese and Chinese. Adjustable display frmat fr the psitins after the decimal pint. Adaptatin f the adjustment range fr the HART addresses t Limitatin f the visible units t SI units (fr instruments sld t Japan)

19 Versin histry: VEGA DTM Cllectin VEGAFLEX 80 HART SIL DTM The DTM supprts nw als the electrnics exchange fr instruments with SIL qualificatin. VEGAPULS 64 HART The DTM supprts nw als the electrnics exchange. VEGAMET 391, 624 Fr the setup f a flw measurement, the setup assistant ffer nw an additinal methd. Fr the standard flw cnstructins, the DTM can nw determine the suitable adjustments by means f the cnstructin dimensins and stre them in the instrument VEGAMET 391, 624, 625 as well as VEGASCAN 693 The cnnectin f the DTMs t the specified signal cnditining instruments via Ethernet can nw be als carried ut with authenticatin by means f a Pre Shared Key (PSK) and additinal encryptin. The DTMs ffer functins fr activatin f this prcedure in the signal cnditining instruments. The use f the safe cmmunicatin is ensured via functin extensins in the Ethernet DTM. Anther requirement fr the safe cmmunicatin is the suitable instrument sftware. VEGAMET 391: Instrument sftware > 1.60 VEGAMET 624, 625 and VEGASCAN 693: Instrument sftware > 1.98 The fllwing errrs were remved VEGA prject assistant The ptin "Limit netwrk search was missing while searching via Bluetth VEGA Bluetth DTM The cnnectin after a lss f cnnectin is nw reestablished autmatically. The VEGA Bluetth DTM can be used in manually generated prjects under FieldCare. VEGAMET DTMs The fllwing errrs were remved: The standard limit value fr the min. adjustment was increased t 120 m, in case a VEGAPULS 64 r a VEGAPULS 69 is used. The switching-n perid is nly displayed with VEGAMET 391. PROTRAC DTMs The fllwing errrs were remved: Varius descriptive texts were missing in the event memry

20 Versin histry: VEGA DTM Cllectin In sme cases, trigger cnditins fr trend recrdings were presented in the wrng way. plics plus DTMs The fllwing errrs n VEGABAR 80, VEGAFLEX 80 as well as VEGAPULS 64 and 69 DTMs were remved: In the EVL files, data f different instruments were mixed when the VEGACONNECT 4 was switched t anther instrument with identical DTM instance. In sme cases, "Reset warm start" culd lead t a cmmunicatin errr. When changing the PIN within the identical DTM instance several times, the wrng PIN was displayed fr "Lcking". VEGABAR 80 DTMs In the linearizatin assistant "Imprt linearizatin curve", values edited afterwards were nt taken ver. PLICSCOM DTM The fllwing errrs were remved: Sftware update fr sensrs via PLICSCOM is nt pssible. The functin is n lnger ffered The errr in the functin "Change instrument address" is remved. VEGA DataViewer The fllwing errrs were remved: While imprting data, the user receives nw a warning if the space in the database is n lnger sufficient. Printing f ech curves via the menu bar is pssible again. Opening the VEGA DataViewer via a file link is pssible again The imprt f ech curves can nw be carried ut again with the Russian MS Windws

21 Versin histry: VEGA DTM Cllectin VEGA-DTM Publicatin date Cntains errr crrectins f VEGA DTM versin the errr crrectin refer t VEGA DataViewer nly. The VEGA DTM versin is available thrugh the dwnlad sectin. It is nt included n the DVD VEGA DTM Cllectin 03/ VEGA-DTM Versin The fllwing errrs were remved VEGA DataViewer: The disruptive blcker states are fixed. Imprting data f a user desn t influence interactins f ther users any mre. The length fr imprting data is reduced nw

22 Versin histry: VEGA DTM Cllectin DTM Cllectin 03 / 2016 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 4.1 SP4 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 03/2016, keep in mind that yu shuld have the actual versin PACTwareTM 4.1 SP4 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws XP, Windws 7 and Windws 8 as well as Windws 10. This applies als t the included 4.1 SP4 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 SP4 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and 4.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 r Windws 10 envirnments hwever additinal interventins by the administratr are required (see Release Ntes in the directry VEGA DTM f the DVD)

23 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: VEGA Bluetth DTM DTM fr wireless cmmunicatin f a PC/Laptp via the external Bluetth USB adapter with Bluetth-capable VEGA instruments. PLICSCOM DTM With this DTM in cmbinatin with a PLICSCOM with Bluetth functin the wireless adjustment f all plics sensrs since 2002 is pssible. Service recrding The service recrding was revised. Mdificatins f the fllwing pints were carried ut: A warning is displayed when the data filing fr the service recrding is nt available. VEGA prject assistant The VEGA prject assistant was extended by the ptin "Bluetth fr searching instruments and sensrs via the Bluetth cnnectin. VEGAMET 391, 624, 625 as well as VEGASCAN 693 The Pre Shared Key (PSK) stred in VEGAMET, used fr cmmunicatin with the Inventry System, can nw be displayed in the DTM fr cmparisn purpses. VEGABAR 80 DTM The DTM was revised in respect t the fllwing pints: The regulatins fr the special parameter "Surce measuring cell temperature" was adapted On the inf page, the measuring ranges f the measuring cells used are nw displayed The "Static pressure" is nw als available in the measured value memry (DTM) fr recrding VEGAPULS 64 DTM The DTM was revised in respect t the fllwing pints: All values with unit "m" are nw displayed with three psitins after the decimal pint The special parameter 24 "Additinal factr safety at the measuring range end was cmpleted. VEGA DataViewer The archive and analysis sftware VEGA DataViewer was revised and extended as fllws: New unique nte functins were created fr the views "Measured values" and "Ech curves"

24 Versin histry: VEGA DTM Cllectin The instrument data area was extended by the view "Order text". With existing Internet cnnectin, there is hence the pssibility t get with nly ne click all relevant data f the actually selected instrument belnging t the rder. In additin, the suitable perating instructins can be pened in this view. Fr a mre intuitive design f the adjustment, additinal adjustment elements were integrated in the menu bar fr the views "Events", "Dcuments" and "DTM data files". The fllwing errrs were remved VEGADIS 82 DTMDTM The search f a VEGADIS 82 via the prject assistant was interrupted with an errr message. The errr was remved. PROTRAC DTMs While imprting ne f the DTM data files, errrs culd ccur while writing the linearizatin int the device. Nw als the TND files are taken ver with service recrdings. After changing the adjustment unit, an invalid cmbinatin f unit and values fr the linearizatin pints was displayed in the DTM. The errr is remved nw. VEGA DataViewer Fr data sets t PROTRAC nly indices were displayed in the view "Measured values" by clicking in the event list instead f the expected texts

25 Versin histry: VEGA DTM Cllectin DTM Cllectin 12 / 2015 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 4.1 SP4 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus Cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 12/2015, keep in mind that yu shuld have the actual versin PACTware TM 4.1 SP4 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws XP, Windws 7 and Windws 8 as well as Windws 10. This applies als t the included 4.1 SP4 FDT cnfrmity: The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTwareTM 4.1 SP4 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and 4.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 r Windws 10 envirnments hwever additinal interventins by the administratr are required (see ReleaseNtes in the directry VEGA DTM f the DVD)

26 Versin histry: VEGA DTM Cllectin New functins PACTware 4.1 SP4 ( ) The peratin under Windws 10 is pssible with this versin Prblems while starting with the TCI prject are remved. Frm this versin, the fllwing instruments/interface are supprted in additin: VEGAPULS 64 HART DTM fr VEGAPULS 64 with HART interface VEGAMET 391, 624, 625 as well as VEGASCAN 693 The different pssibilities t avid unauthrized access t the device parameters can nw be managed centrally in the DTM parameter page "Access prtectin". In the DTM parameter page "Event list", the terms and the different adjustment pssibilities fr data transmissin t the VEGA Inventry System were adapted. VEGAMET 391 DTM The VEGAMET 391 were extended by the fllwing functins frm instrument sftware 1.60: Pump cntrl functin with new mdes Alternating pump peratin Dry weather pump Frced changever f pump Cunter fr switch-n prcesses Secnd cunter with flw measurements The parameter adjustment f the new functin is nw als supprted by the DTM. VEGAPULS 69 DTMs Nw the fllwing functin extensins are supprted by the instrument sftware 1.1.0: The display frmat f the measured value utput n PLICSCOM is nw selectable individually. The display and adjustment unit can nw als be adjusted t the languages "Chinese" and "Japanese". Reset ptin "Re-start The reset ptin "Re-start" enables a restart f the instruments via the DTMs withut interrupting the pwer supply. This functin was retrfitted fr the fllwing DTMs: PROTRAC DTMs VEGABAR 80 DTMs Linearizatin assistant The linearizatin assistant ffers nw additinal supprt fr linearizatin f measurements n cylindrical tanks

27 Versin histry: VEGA DTM Cllectin The setup f measurement n cylindrical tanks with slight inclinatin was imprved The setup f measurements n upright cylindrical tanks ffers nw an alternative input methd Service recrding The service recrding was revised. Mdificatins f the fllwing pints were carried ut: The "Save as" dialgue n lnger appears. The DTM stres the files accrding t an autmatically predefined name system. After successful packing, the DTM stres all recrding files in a ZIP file accrding t abve name system and deletes then the individual recrding files The peratin f all service recrdings via the DTM tlbar is nw standardized fr all plics DTMs. The tlbar was als extended by an icn fr pening the service flder When transferring the data t the VEGA DataViewer, a warning is displayed if there is nt enugh memry capacity available The additinal infrmatin f measured values with s called peak values will be laded autmatically thrugh the service recrding VEGA DataViewer The archive and analysis sftware VEGA DataViewer was revised and extended as fllws: The layut f the adjustment surface was cnverted t the style f mdern Office prducts. Cntents f PACTware prject files will nly be extracted if the DTMs cntain real device data. In the view "Infrmatin", the feature fields were revised. The industry field was changed t a selectin list. The fllwing errrs were remved All plics DTMs In the FDT frame "Fieldmate" f Ykgawa the use f DTM mdal dialgues caused cnflicts. Such dialgues are nw mitted. VEGABAR 80 DTMs With the applicatin "Density-cmpensated level" sme ptins in the start dialgue were blcked. In sme cases, writing data int the device was nt pssible after an imprt

28 Versin histry: VEGA DTM Cllectin PROTRAC DTMs The BusMasterCnfiguratinPart (BMCP) fr creating a cyclical data traffic directly via an FDT frame was adapted. The previus BMCP culd nt be used in the FDT frame "UnityPr" frm Schneider. In multi-gauge applicatins, the sensr dcumentatin cntains in additin the addresses f the slaves The simulatin f the prcess value with the applicatin "Mass flw (tube)" des nw functin VEGAPULS 61, 62, 63, 65, 66 und 67 DTMs Cnnectin was nt pssible fr instruments with instrument sftware 4.0 t VEGAPULS 69 DTMs The functin "Edit false signal" delivered wrng values when using the unit "ft". Service recrding File names cntaining several times the sign ".", were nt taken int accunt when generating the ZIP file. The ZIP files generated by the service recrding culd n lnger be pened under Windws XP. VEGA DataViewer When exprting measured values as CSV file, the time was missing in the time stamp The device TAG in the instrument list is nw updated. The device TAG f the actual data bject is used. Deleting f large ech curve blcks was nt pssible Creating backups n netwrk paths did nt functin

29 Versin histry: VEGA DTM Cllectin DTM Cllectin 06 / 2015 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 4.1 SP3 ( ) - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available in the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 06/2015, keep in mind that yu shuld have the actual versin PACTware TM 4.1 SP3 installed. In general All VEGA DTMs in this DTM Cllectin are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7 as well as Windws 8. This applies als t the included 4.1 SP3 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 SP3 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and 4.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 envirnments hwever additinal interventins by the administratr are required (see Release Ntes in the directry VEGA DTM f the DVD)

30 Versin histry: VEGA DTM Cllectin New functins PACTware The reasn fr spradically ccurring prblems while string large prjects was identified and remved. The strage management taking ver the administratin f several DTMs in a prject pened at the same time was ptimized. VEGAFLEX 80 DTM (HART SIL, Prfibus and FF) Fr the instrument versins with interface fr FF (Fundatin Fieldbus), the DTM ffers frm instrument sftware the fllwing extensins: The distance unit fr the instrument can nw als be set t "inch". Fr the determinatin f the dielectric figure, an assistant is nw available. The reliability is nw utputted in mv. The language selectin fr PLICSCOM was extended t the languages "Turkish", "Plish" and "Czech". Fr instrument versins with interface fr HART SIL r Prfibus, these extensins are already ffered frm instrument sftware VEGABAR 80 DTM (HART, HART SIL, Prfibus, FF as well as withut interface) Fr the instrument versins withut interface as well as interface fr HART, the fllwing extensins are supprted frm instrument sftware 1.2.0: Density-cmpensated level measurement Single layer crrectin Extensins in the range special parameter The language selectin fr PLICSCOM was extended t the languages "Chinese and "Japanese". The display frmat f the measured value utput n PLICSCOM is nw selectable individually. Fr the instrument versins with interface fr HART SIL, Prfibus r FF, these extensins are already ffered frm instrument sftware Fr the instrument versins with Prfibus and FF interface, the DTMs ffer nw the functin "Electrnics exchange". VEGAPULS 69 DTM With HART: In the DTM menu, the ptin "Change instrument address" was cmpleted With Prfibus: The functin "Electrnics exchange" is nw supprted Service recrding Service recrdings are nw limited t a max. size f 0.5 Gbyte. A new service recrding is autmatically started with lng-term recrdings when this limit is reached. VEGA DataViewer In the device list, a clumn "Size" can nw be displayed t shw the strage requirement per instrument

31 Versin histry: VEGA DTM Cllectin In the area "Available data", there is nw the pssibility f selectively deleting data f an instrument. The quick search was revised. The real search starts nw nly after pushing the "Enter key" r by clicking the magnificatin symbl. This makes wrking n slw systems mre cmfrtable. Ntes f the recrding in the area "Ech curves" which were added in the DTM, can nw als be edited in the VEGA DataViewer. A functin t create/restre backups is nw implemented VEGAMET DTM As recrding pattern fr recrding a device trend, the interval "every 15 minutes" can nw be selected. The fllwing errrs were remved VEGABAR 80 DTM The service recrding tried t lad an event list fr instrument versins withut interface. The errr was remved. PROTRAC DTM The autmatic ffset crrectin is n lnger ffered with the applicatin "Densitycmpensated level". Fr sme applicatins, the number f psitins after the cmma fr the static pressure was nt displayed crrectly. The errr texts fr F041 and F042 were crrected. The errr while imprting data was remved. VEGA DataViewer When zming in ech curves, the fcussing range was shwn incrrectly in sme cases. When returning t the previus ech curve blck, previusly the last curve was selected. Nw the first curve f an ech curve blck is generally activated

32 Versin histry: VEGA DTM Cllectin VEGA-DTM Publicatin date Cntains errr crrectins f VEGA DTM versin The VEGA DTM versin is available thrugh the dwnlad sectin. It is als included n the DVD VEGA DTM Cllectin 03/2015 and n DVD Sftware & Dcuments 03/2015 as well. - VEGA-DTM Versin The fllwing errrs were remved VEGABAR 80 FF - DTM: Establishing a cnnectin t VEGABAR 80 FF was impssible. The errr is remved nw. VEGAPULS DTM (plics plus): While executing a dwnlad int lder device versins, the DTM tried t transfer data which has been unknwn by the device. This generated sme needless errr messages

33 Versin histry: VEGA DTM Cllectin DTM Cllectin 03 / 2015 Publicatin date The DTM Cllectin cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin 1.1, 2.0 and PACTware TM Versin 4.1 SP3 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 The DTM Cllectin 03 / 2015 in this cmbinatin hasn t been distributed by DVD. Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the DTM Cllectin. If yu want t use all functins f the VEGA DTM Cllectin 03/2015, keep in mind that yu shuld have the actual versin PACTware TM 4.1 SP3 installed. In general All VEGA DTMs n this DTM Cllectin are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7 as well as Windws 8. This applies als t the included 4.1 SP3 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 SP3 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 and 4.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 envirnments hwever additinal interventins by the administratr are required (see Release Ntes in the directry VEGA DTM f the DVD)

34 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: VEGAPULS 69 Prfibus DTM fr VEGAPULS 69 with Prfibus interface VEGAPULS 69 FF DTM fr VEGAPULS 69 with Fundatin Fieldbus interface VEGAFLEX 80 HART - DTM The adjustment cncept in the DTM navigatin sectin and in the quick setup was adapted t the actual cncept f VEGABAR 80. Frm instrument firmware the DTM ffers the fllwing extensins: VEGABAR 80 DTM The distance unit fr the instrument can nw als be set t "inch". Fr the determinatin f the dielectric figure, an assistant is nw available. The reliability is nw utputted in mv. The language selectin fr PLICSCOM was extended t the languages "Turkish", "Plish" and "Czech". All ptins f the linearizatin assistant can nw be used anytime. The previus dependencies n the cnnectin status and the set adjustment unit can be mitted. The Prfibus address can nw als be adjusted in the quick setup. PROTRAC DTM The autmaticreal value crrectin can nw als be selected in the applicatin "Mass flw" (frm instrument sftware 1.2.0). VEGA DataViewer Custmers buying the VEGA DTMs as a full versin, will nw get alng with the VEGA DataViewer a database-supprted slutin fr prcessing and analyzing the DTM recrdings. The VEGA DataViewer replaces the previusly integrated VEGA Multiviewer. The fllwing errrs were remved VEGAPULS 69 DTM Edit false signal During the cnnectin t VEGAPULS 69 sensrs already existing entries f the parameter page "Edit false signal" were nt laded. Measured value memry (DTM) The reliability is nw als recrded

35 Versin histry: VEGA DTM Cllectin VEGAFLEX 80 DTM In the applicatin "Interface", the determined adjustment values f the linearizatin assistant were nt written int the instrument. PROTRAC DTM Under certain cnditins, the indicatin f the values fr mass flw were exchanged in the linearizatin table. The criteria fr start and stp f the measured value memry were saved in the wrng way The telegram length fr HART cmmunicatin via VEGACONNECT 4 was adapted VEGAMET DTM While adjusting a flw measurement thrugh the setup assistant, the linearizatin curve was nt written int the instrument. This effect was bvius when "Flw frmula r "ISCO-Parshall Flume was selected as flume type. VEGADIS 82 The functin electrnics exchange delivered a wrng instrument type Service recrding While starting the service recrding frm "Setup and maintenance" it is nw ensured that the DTM is synchrnized cmpletely with the instrument data. If necessary, the settings are laded frm the instrument

36 Versin histry: VEGA DTM Cllectin VEGA DTM Publicatin date Cntains errr crrectins f VEGA DTM versin The VEGA DTM versin is nly available thrugh the dwnlad sectin - VEGA DTM Versin The fllwing errrs were remved PROTRAC DTMs: The telegram length fr HART cnnectin was increased in the previus versin t achieve a quicker cmmunicatin. In sme cases, this measure caused an instable cmmunicatin with PROTRAC instruments and was hence reset. With SIL DTMs, parameters were written during the dwnlad which were nt relevant fr these instruments and thus caused errr messages. These parameters are nw n lnger used in the DTM. VEGASCAN 693 DTM: Under certain cnditins, the cnfiguratin f measurement lps caused wrng results. The errr is remved nw

37 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2014 Publicatin date The DVD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin 4.1 SP3 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the DVD. If yu want t use all functins f the VEGA DTM Cllectin 10/2014, keep in mind that yu shuld have the actual versin PACTwareTM 4.1 SP3 installed. In general All VEGA DTMs n this DVD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7 as well as Windws 8. This applies als t the included 4.1 SP3 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTwareTM 4.1 SP3 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), attempts are made t install all required sftware cmpnents autmatically. With sme Windws 8 envirnments hwever additinal interventins by the administratr are required (see ReleaseNtes in the directry VEGA DTM f the DVD)

38 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: - VEGABAR 80 series FF DTM fr VEGABAR 81, 82, 83, 86, 87 with Fundatin Fieldbus interface - VEGAPULS 69 HART DTM fr VEGAPULS 69 with HART interface DTM fr signal cnditining instruments Transmissin f lcatin data The DTMs fr VEGAMET/VEGASCAN and PLICSMOBILE supprt nw the functin t establish the transmissin f lcatin data t the measured value server WEB VV and similar systems. Density measurement Establishing a density measurement in VEGAMET 625 is nw cnsiderably simplified by a special ptin in the applicatin assistant. Measurement lps with HART variables In the instrument types VEGAMET and VEGASCAN nw als the standard HART variables f plics plus sensrs can be used fr the measurement lps. The DTMs were extended fr establishing these variables. Operatin f HART sensrs Fr the peratin f plics plus VEGA sensrs with HART cmmunicatin, the cmmunicatin behaviur was ptimized s that the cnnectin and the data exchange are nw faster. The standard length fr HART telegrams was increased. During cnnectin, nly data are laded which are required fr the direct parameterizatin. Ech curves, false signal memry etc. can be laded later n, if necessary. Linearizatin assistant The linearizatin ptin "Gauging by litres allws nw als the manual setting fr index markers f the linearizatin curve. The fllwing errrs were remved Service recrding The ZIP files f the service recrding use nw a better level f cmpressin. VEGADIS 82 DTM The cntents f the parameter page "Diagnsis" are nw als shwn in the device dcumentatin. Mdbus Serial Driver The range f the selectin f the COM prt in the DTM "Mdbus Serial Driver was extended. Nw prts in the range 1 t 255 can be selected

39 Versin histry: VEGA DTM Cllectin Establishing a density measurement By establishing density measurements fr PROTRAC sensrs in cmbinatin with an autmatic real value crrectin, prblems fr the pulse rate determinatin f the backgrund radiatin culd ccur. The errr in the DTM was remved. Event memry When shwing a PIN change in the event memry, the selected PIN is n lnger displayed. Nn-synchrnized mde The settings fr the measured value memry can nw als be changed in the "nnsynchrnized mde". VEGABAR 80 DTM The errr in the assistant fr setting the "Measured value memry (device)" when selecting FBs was remved (nly Prfibus). When using the linearizatin assistant, nw als linearized values are selected (nly Prfibus) in the FB channel. Density measurement In the quick setup, the distance f the sensrs was nt taken ver with applicatin type "Density measurement". The distance value is nw taken ver

40 Versin histry: VEGA DTM Cllectin DTM Cllectin 05 / 2014 Publicatin date The DVD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin 4.1 SP3 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the DVD. If yu want t use all functins f the VEGA DTM Cllectin 05/2014, keep in mind that yu shuld have the actual versin PACTware TM 4.1 SP3 installed. In general All VEGA DTMs n this DVD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7 as well as Windws 8. This applies als t the included 4.1 SP3 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 SP3 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), all required sftware cmpnents will be installed autmatically

41 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: - VEGABAR 80 series Prfibus DTM fr VEGABAR 81, 82, 83, 86, 87 with Prfibus interface - VEGABAR 80 series HART SIL DTM fr VEGABAR 81, 82, 83, 86, 87 with HART interface and SIL qualificatin - VEGADIS 82 DTM fr VEGADIS 82 PROTRAC DTM The fllwing functin extensins were carried ut fr the PROTRAC DTMs: Lading and shwing the event memry integrated in the instrument, the parameter mdificatin memry as well as the measured value memry. The selectin f the units was extended by PPA and KgA The real value crrectin can nw als be carried ut cyclically The mass flw measurement can nw als be cmbined with the misture measurement The functins are nly ffered in the DTM if they are supprted by the instrument sftware. The setup assistant was particularly ptimized and extended t establish applicatins with cmbined instruments. The DTMs ffer nw als the functin "Service recrding" In the diagnsis sectin, there are als infrmatin available f the inputs t be cnfigured VEGAMET DTM The DTMs fr VEGAMET/VEGASCAN supprt nw als the establishment f the encrypted transmissin. The functin is nly ffered in the DTM if it is supprted by the instrument sftware. DTM Cnfiguratr The DTM Cnfiguratr ffers nw a pssibility t increase the max. telegram length fr HART cnnectins. Hence the data thrughput with many HART netwrks can be imprved cnsiderably. Lck adjustment The prcedure t lck the adjustment by means f DTM was changes. The definitin f a new PIN is nw carried ut in the assistant "Lck adjustment"

42 Versin histry: VEGA DTM Cllectin Service recrding The service recrding is nly finished cmpletely if it is finished with the tlbar symbl "Finish service recrding". If the DTM is clsed during the service recrding, then the immediate clsing f the DTM has pririty. Language selectin The VEGABAR 80 DTMs ffer nw als the changever t the PLICSCOM language Czech. Linearizatin assistant The linearizatin assistant checks nw if the string f mdified parameters int the instrument is necessary befre the linearizatin is carried ut. The fllwing errrs were remved Sensr dcumentatin Frmatting prblems f the sensr dcumentatin ccurred under Windws 8 and different Windws 7 versins in the Asian regin, were remved nw. Multiviewer The multiviewer nw displays the TND recrdings crrectly if they were generated with DTM versins earlier than versin Change device address The errr when changing the instrument address f Prfibus sensrs f instrument generatin plics n lnger exists. The errr nly ccurred when the mdificatin was triggered via the ptin dialgue f the instrument DTMs. Online help The cntents f sme nline help pages (e.g. measured value memry and ech curve memry) must be updated. Adjustment r imprt with VEGABAR 80 In sme cases, the limit value determinatin with applicatin "Prcess pressure" did nt wrk crrectly, therefre the adjustment culd nt be written int the instrument

43 Versin histry: VEGA DTM Cllectin VEGA DTM Publicatin date Cntains fault rectificatins t VEGA DTM versin The VEGA-DTM versin is available as patch versin in the dwnlad sectin - VEGA DTM Versin The fllwing errrs were remved PROTRAC DTMs: Recrding f measured value curves via the functin measured value (DTM) functins nw again DTM Selectr: The errr message while deselecting the DTMs fr adjustment f series 40/50 des n lnger appear. Installatin: The installatin prblem n cmputers where My dcuments are linked t a server path des n lnger exist

44 Versin histry: VEGA DTM Cllectin DTM Cllectin 01 / 2014 Publicatin date The DVD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin 4.1 SP3 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the DVD. If yu want t use all functins f the VEGA DTM Cllectin 01/2014, keep in mind that yu shuld have the actual versin PACTware TM 4.1 SP3 installed. In general All VEGA DTMs n this DVD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7 as well as Windws 8. This applies als t the included 4.1 SP3 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 SP3 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), all required sftware cmpnents will be installed autmatically

45 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: - VEGABAR series 80 DTM fr VEGABAR 81, 82, 83, 86, 87 - VEGABAR series 80 HART DTM fr VEGABAR 81, 82, 83, 86, 87 HART Sensr dcumentatin When using a "User-prgrammable linearizatin curve", the sensr dcumentatin f the VEGAFLEX 80 and VEGABAR 80 series includes nw als graphic infrmatin f the selected vessel gemetry as well as the linearizatin table f the adjusted range. Electrnics exchange The electrnics exchange supprts nw als the instrument series VEGAFLEX 80 Prfibus and VEGAFLEX 80 FF. Linearizatin assistant Different ptimizatins in the calculatin assistant fr instrument series VEGAFLEX 80 and VEGABAR 80. Adjust device address The dialgues t adjust the device address supprt nw als the extended address range fr HART7 instruments The fllwing errrs were remved VEGAFLEX 80 DTM The input f the measured value difference in mm as recrding ptin fr the ech curve memry was nt interpreted crrectly. The functin "Electrnics exchange" ffers nw als the activatin f the secnd current utput Errr while calculating the linearizatin table f the adjusted range (with prbe length << vessel height) was remved Indicatin f the wrng unit fr PV Scale in F (with Prfibus) was crrected Synchrnisatin with Fundatin Fieldbus The synchrnisatin f the parameter pages fr indicatin f AI-FBs with instruments fr peratin n Fundatin Fieldbus failed in sme cases

46 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2013 Publicatin date The DVD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin PACTware TM Versin 4.1 SP3 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the DVD. If yu want t use all functins f the VEGA DTM Cllectin 10/2013, keep in mind that yu shuld have the actual versin PACTware 4.1 SP3 installed. In general All VEGA DTMs n this DVD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7 as well as Windws 8. This applies als t the included 4.1 SP3 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTwareTM 4.1 SP3 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via DVD (Autrun), all required sftware cmpnents will be installed autmatically

47 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: - VEGAFLEX 80 series FF - DTM fr VEGAFLEX 81, 82, 83, 86 Fundatin Fieldbus Electrnics exchange fr PROTRAC series The DTMs fr the adjustment f the PROTRAC series supprt nw als the electrnics exchange fr Prfibus and Fundatin Fieldbus instruments

48 Versin histry: VEGA DTM Cllectin DTM Cllectin 05 / 2013 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin 4.1 SP3 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 05/2013, keep in mind that yu shuld have the actual versin PACTware TM 4.1 SP3 installed. In general All VEGA DTMs n this CD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7 as well as Windws 8. This applies als t the included 4.1 SP3 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 SP3 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via CD (Autrun), all required sftware cmpnents will be installed autmatically

49 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments/interface are supprted in additin: - VEGAFLEX 80 series HART SIL DTM fr VEGAFLEX 81, 82, 83, 86 HART SIL - VEGAFLEX 80 series Prfibus DTM fr VEGAFLEX 81, 82, 83, 86 Prfibus Linearizatin assistant The DTMs fr adjustment f the VEGAFLEX 80 family were extended by an assistant fr implementatin f a linearizatin f the measured values. The linearizatin assistant supprts the handling f different standard tasks whereby the use f the assistant assures that als the settings f the adjustment, scaling, vessel height and scket crrectin fit with the adjusted linearizatin curve. Service recrding All DTMs fr adjustment f plics plus sensrs were equipped with an imprved functin fr creating service recrdings. The adjustment f this functins is made directly via the tlbar symbls f the DTM. Hence files with ech curves, measured value recrdings and event memry as well as a DTM data file are generated. When terminating the functin, the files will be packed as a ZIP file and stred n the data carrier f the wrkstatin. In future, string f ech curve recrdings n the data carrier f the wrkstatin will nly be pssible with the service recrding. Ech curve presentatin The functin f the parameter page "Ech curves" was revised. In future, reading ut f the ech curves is carried ut directly after pening the page "Ech curve" (n actin required). When quitting this page, reading ut will be terminated. The ech curves cannt be stred in this mde. Fr the selectin f the visualized curves under presentatin ptin, lateral adjustment panels are nw available. Sensr dcumentatin When using a "User-prgrammable linearizatin curve", the sensr dcumentatin includes nw als infrmatin n the selected vessel gemetry. Diagnsis infrmatin With the DTMs fr VEGAMET and VEGASCAN the diagnsis infrmatin appear nw mre differentiated depending if the diagnsis cmes directly frm the cnnected sensr r frm the VEGAMET. Language selectin The VEGACAL DTMs ffer nw als the changever t the PLICSCOM languages Japanese and Chinese. The PROTRAC DTMs were extended fr the selectin f the PLICSCOM language Prtuguese. Electrnics exchange fr PROTRAC series The DTMs fr the adjustment f the PROTRAC series supprt nw als the electrnics exchange

50 Versin histry: VEGA DTM Cllectin The fllwing errrs were remved Sftware update In sme DTM languages the prgress indicatin was nly displayed in hurs. VEGAFLEX 80 DTM The limit value fr the "Sunded distance t the medium" with the false signal suppressin is n lnger limited t the actual prbe length. The presentatin f the ech curve in the sensr dcumentatin was ptimized. Quick setup f the VEGAFLEX 80 DTM When creating the device dcumentatin the crrespnding ech curve nw als appears. The value fr the measured distance in the sensr ptimizatin is nw updated cyclically. After determinatin f the prbe length, a dwnlad f the determined value is nw carried ut autmatically. Tank Calculatin A text is displayed if the prgram is quit withut string the data

51 Versin histry: VEGA DTM Cllectin DTM Cllectin 12 / 2012 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin 4.1 SP2 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte:In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 12/2012, keep in mind that yu shuld have the actual versin PACTwareTM 4.1 SP2 installed. In general All VEGA DTMs n this CD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7. This applies als t the included 4.1 SP2 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 SP2 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via CD (Autrun), all required sftware cmpnents will be installed autmatically. Language extensin The VEGA DTMs ffer fr the first time the user interface in Chinese language. The nline help is nt yet translated and appears in English language

52 Versin histry: VEGA DTM Cllectin New functins VEGAFLEX 80 DTM The instruments f the VEGAFLEX 80 family can be equipped in future als with an additinal current utput. The DTMs were prepared fr peratin with an additinal current utput. Diagnsis functin The diagnsis functin f the DTMs fr all instruments f the plics plus series (VEGAPULS and VEGAFLEX) will be nly read ut if a diagnsis page is actually pened. This measure is used t reduce the data vlume during cnnectin. PLICSMOBILE DTM In the diagnsis area, the IMEI number is nw als displayed. VEGAMET 391 and VEGAMET 6xx DTM Fr the cnfiguratin f events ( , SMS, WEB-VV) the adjustment values can nw als be set every 30 minutes and every 15 minutes. VEGA DTM Cnfiguratr The categry Interperability was cmpleted by an adjustment ptin t utput shrtened DTM descriptins. This ptin was prvided fr FDT frame applicatins f Messrs. ABB t get with OPC use shrt OPC items. Multiviewer The results f the functin Cmpare exprt files can nw als be printed directly. The fllwing errrs were remved Device search With the device search via the VEGA prject assistant, nw als the instrument types PLICSMOBILE are fund. False signal suppressin Fr the false signal suppressin nw als values can be entered which are higher than the prbe length. Linearizatin table The clumn fr indicatin f the scaled values can nw be switched n ptinally. Ech curve memry Reading ut the ech curve memry f the VEGAPULS plics plus and VEGAFLEX 80 sensrs is nw als pssible with lcked instrument. Ech curve The presentatin ptin Ech data des nw als functin with the VEGAFLEX 80 DTMs. PROTRAC DTM - The presentatin f the current characteristics in the image Current utput was crrected - The instrument can n lnger be lcked when entering an invalid PIN

53 Versin histry: VEGA DTM Cllectin - Event memry can nw als read ut with lcked instrument - The inf texts when carrying ut the real value crrectin were crrected Service recrding When terminating the service recrding via the DTM menu, the events and the instrument parameter adjustment are stred with the latest infrmatin. Sensr dcumentatin - Ech curve in the extended presentatin range is nw displayed - Ech curve is nw displayed even if the ptin D nt lad ech curve during cnnectin is selected in the DTM Cnfiguratr. PLICSMOBILE DTM When sending an , it is nw als pssible t transmit the device status as attachment. Linearizatin Under certain cnditins, linearizatin curves which were calculated with the calculatin assistant culd nt be taken ver int the instrument. The errr was remved

54 Versin histry: VEGA DTM Cllectin VEGA-DTM Publicatin date Includes several bug-fixes fr VEGA-DTM versin and The VEGA-DTM versin is prvided as dwnlad versin, as CDs VEGA DTM Cllectin 07/2012 including VEGA-DTM and as DVD Sftware & Dcuments as well. - VEGA-DTM versin The fllwing errrs were remved VEGAFLEX and VEGAPULS - DTM: Prblems with updating the false signal curve after mdificatins. VEGAFLEX and VEGAPULS - DTM: Mdificatins f the false signal suppressin have been indicated as change f the parameterizatin. VEGAFLEX 80 series HART - DTM: There have been sme curves missing in the ech recrding f the service recrding functin

55 Versin histry: VEGA DTM Cllectin VEGA-DTM Publicatin date Includes several bug-fixes fr VEGA-DTM versin The VEGA-DTM versin is prvided as dwnlad versin and it is included in the DVD Sftware & Dcuments. - VEGA-DTM versin The fllwing errrs were remved VEGAFLEX 80 series HART Limit values fr simulatin f "Lin.percent, level" and "Dielectric cnstant" have been changed. VEGAPULS 61 up t 67 In several applicatins, sme parameters have been masked ut by mistake. VEGAFLEX 80 series HART DTM and VEGAPULS 61 up t 67 The supprted units have been extended by: g, STn and LTn. VEGAMET (all), VEGASCAN 693, C62, PLICSMOBILE The adjustment f a minimum intervall fr a WEB-VV event is nw pssible. PLICSMOBILE The adjustment fr cntrl f a WEB-VV event by the measured value difference is nw als pssible fr the unit Lin. percent. PROTRAC family The adjustment Activate current utput is nw als available fr instruments with SIL

56 Versin histry: VEGA DTM Cllectin DTM Cllectin 07 / 2012 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin 4.1 SP2 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 07/2012, keep in mind that yu shuld have the actual versin PACTware TM 4.1 SP2 installed. In general All VEGA DTMs n this CD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7. This applies als t the included PACTware 4.1 SP2 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 SP2 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via CD (Autrun), all required sftware cmpnents will be installed autmatically. Language extensin The VEGA DTMs ffer fr the first time the user interface and the nline help in Prtuguese language

57 Versin histry: VEGA DTM Cllectin New functins PACTware 4.1 SP2 PACTware was revised and is nw available as a cmpact installatin package. PACTware can nw als be perated in Chinese language and the nline help was translated accrdingly. By using the extended call parameters, the DTMs can nw als be started withut PACTware surface. VEGAFLEX 80 series DTM The instrument series VEGAFLEX was cmpleted by types VEGAFLEX 81, 82, 83 and 86. A respective DTM fr supprt f these instrument types was added t the DTM Cllectin. The DTM supprts the parameter adjustment via HART bus, but als the direct cnnectin via cnfiguratin interface n the instrument side thrugh VEGACONNECT 4. PROTRAC DTM All instrument types f the PROTRAC series can nw be rdered with a Prfibus interface. Respective DTMs supprting these instrument types were added. PROTRAC SIL DTM Respecitive SIL DTMs were added fr PROTRAC instrument types with SIL qualificatin. Apart frm the special features f these instruments, the DTMs cntain als a methd t supprt a safe parameterizatin cncept accrding t SIL. Mdbus Serial DTM Fr direct peratin f the Mdbus mdule via the Mdbus, a cmmunicatin DTM VEGA Mdbus Serial was added. VEGAMET 391 and VEGAMET 6xx DTM The pump cntrl was extended by the ptin "Frced switching ver". The list f the scaling units was extended by the unit "mnn" and varius density units Nn-synchrnized peratin The DTMs fr VEGAPULS 60 (plics plus) and VEGAFLEX 80 can nw als be adjusted fr the s called "Nn-synchrnized peratin". In this mde, the user is respnsibe fr the data cnsistency between prject and device data; the fllwing simplified features are applicable: During cnnectin, nly the identificatin data f the device are laded Further device data are laded when pening a parameter adjustment page Parameter changes in the Parameter windw Online are nt autmatically stred in the prject. The updating rate f measurement and diagnsis values can be adjusted via the VEGA DTM Cnfiguratr. In the Parameter windw Offline neither measured values nr diagnsis values are displayed In this mde, the cmmunicatin rate between cmputer and cnnected instrument can be reduced t a minimum, which is a particular advantage fr cnnectins with lw band width (fr example Wireless HART)

58 Versin histry: VEGA DTM Cllectin VEGA DTM Cnfiguratr The VEGA DTM Cnfiguratr was extended by the tab "Synchrnizatin". Here, the changever between "synchrnized" and "nn-synchrnized" peratin can be carried ut. The adaptatins act nly n the DTMs fr VEGAPULS 60 (plics plus) and VEGAFLEX 80. Imprt/Exprt funkcin A respective warning is utputted when trying t exprt an incmplete data set ut f a DTM. The imprt assistant infrms als if a file shuld be imprted with an incmplete data set. Incmplete data sets can be caused when wrking with DTMs in the "Nnsynchrnized" mde. VEGA USB-Scan Fr cnnectin f the VEGA instrument via USB, a desktp link called VEGA USB-Scan is prvided. With this call ptin, PACTware is pened with the autmatic start f the VEGA prject assistant. In ding s, a search via the USB interface is initiated, the suitable DTM is pened and the device data are laded. In case, the cmputer can cntact exactly ne instrument, the adjustment elements f PACTware will be faded ut. Service recrding When executing a service recrding with a VEGAPULS DTM, the labratry parameters are nw laded autmatically. These parameters can be taken ver with a later imprt. Prxy Server The instrument types VEGAMET 624, 625 and 391 as well as VEGASCAN 693 and PLICSRADIO C62 can nw be perated n a Prxy Server. The DTMs are extended accrdingly by the parameter page Prxy-Server. The fllwing errrs were remved VEGASON S61 and S62 With the device search via the VEGA prject assistant, nw als the instrument types VEGASON S61 and S62 are fund. Linearizatin With the Prfibus and FF versins f the VEGAPULS DTMs, the indicatin f the scaled linearizatin values can be selected separately fr each AI-FB. Multiviewer With ech curve recrdings, nw als the Ech curve f the seup can be displayed. Ech curve indicatin The presentatin f the adjustment range in the ech curve indicatin was faulty, if the indicatin was carried ut in the unit "ft". PLICSMOBILE DTM The functin Change DTM address is nw als available in the PLICSMOBILE DTM. PROTRAC DTM The presentatin f the PD-TAG as well as the name f the channel in the parameter page Inf were faulty

59 Versin histry: VEGA DTM Cllectin VEGABAR DTM With the presentatin f the peak values in the unit "bar", als the psitins after the decimal pint are nw displayed. Mdbus Mdule Serial DTM The address fr the Levelmaster can n be adjusted. Imprt functin (VEGAMET DTM) The imprt f data is nw als pssible in the standard versin f the VEGAMET DTMs. Language setting f the DTM tls The langugage changever fr the DTM-Cnfiguratr, DTM-Selectr and Multiviewer depends nw n the mst recently used language setting in the VEGA DTM

60 Versin histry: VEGA DTM Cllectin DTM Cllectin 12 / 2011 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 12/2011, keep in mind that yu shuld have the actual versin PACTware TM 4.1 installed. In general All VEGA DTMs n this CD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7. This applies als t the included PACTware 4.1 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.1 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via CD (Autrun), all required sftware cmpnents will be installed autmatically

61 Versin histry: VEGA DTM Cllectin New functins PACTware 4.1 PACTware was revised and is nw shipped in the versin 4.1. Apart frm the imprvements f the functin "Diagnstic Scan" als the generic functin fr searching in devices netwrks will nw als be implemented. The new functin can be pened via "Tplgy Scan". PROTRAC All instrument types f the PROTRAC series can nw als be rdered with an FF interface. Respective DTMs supprting this instrument types were added. VEGAMET 391 SIL Fr VEGAMET 391 with SIL qualificatin, the VEGAMET 391 SIL DTM has been enhanced. Apart frm the special features f this instrument, the DTM cntains als a methd t supprt a safe parameterizatin cncept accrding t SIL. Mdbus mdule serial VEGA sensrs f the plics plus generatin can be extended in future with a Mdbus mdule (Gateway). This mdule allws the peratin f the sensrs in Mdbus systems. Fr peratin f the Mdbus mdule, the new Mdbus Mdule Serial DTM is nw available. PROTRAC DTM The fllwing nvelties were carried ut: Applicatin steam density cmpensatin was cmpleted Functin Imprt assistant was cmpleted Functin Service recrding was cmpleted Placehlder DTM The Placehlder DTM is nw used apart frm the previus use fr the FDT Scan als fr the treatment f a universal electrnics (electrnics exchange). If the prject assistant finds a universal electrnics when searching in the tplgy, i.e. an electrnics which was nt yet cnfigured, then a Placehlder DTM is integrated in the prject windw. Furthermre the functin Sftware update can be als pened directly frm the Placehlder DTM. VEGA DTM Cnfiguratr The VEGA DTM Cnfiguratr was extended by a register card "Interperability" fr better adaptatin f the VEGA DTMs t different DTM frame applicatins

62 Versin histry: VEGA DTM Cllectin The fllwing errrs were remved Decimal separatr The use f a decimal separatr deviating frm the perating system definitin can cause a misinterpretatin during the parameter acceptance. The entry fields accept nly the respectively valid decimal separatr. VEGAMET 391 Setup assistant The input f the sensr characteristics values fr standard applicatins did nt wrk crrectly. The values are nw taken ver crrectly. Relay The pump mnitring can nw als be set with the mde Pump mnitring Service recrding During the service recrding, an exprt file is nw als stred fr the sensrs f the plics generatin Event memry The event memry f the sensrs f the plics plus generatin culd nt be read ut if the cnnectin t the DTM was directly prvided via the Fundatin Fieldbus interface Multiviewer The fllwing errrs were remved: The presentatin f the lgarithmic ech curve recrdings frm DTM is nw carried ut crrectly

63 Versin histry: VEGA DTM Cllectin DTM Cllectin 06 / 2011 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin VEGA-DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.11 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 06/2011, keep in mind that yu shuld have the actual versin PACTware TM 4.0 installed. In general All VEGA DTMs n this CD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7. This applies als t the included PACTware 4.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.0 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via CD (Autrun), all required sftware cmpnents will be installed autmatically

64 Versin histry: VEGA DTM Cllectin New functins Installatin Language selectin fr Autrun and VEGA DTM setup was extended by the language Russian. WEIGHTRAC DTM The instrument series PROTRAC was extended by the types WEIGHTRAC 31 and 32. The DTMs t supprt these instrument types were included in the DTM Cllectin. The DTMs supprt the parameter adjustment via the HART bus as well as the direct cnnectin via the cnfiguratin interface n the instrument side via VEGACONNECT4. PROTRAC DTM The fllwing changes were carried ut: Sftware update was included Applicatin API temperature cmpensatin was cmpleted Illustratins f different applicatins were revised Parameter page Real value crrectin was revised VEGAPULS - DTM The DTMs r the plics plus instrument series were extended by the fllwing functins: The imprt functin appears nw with different ptins adapted especially t the mst imprtant applicatins PLICSMOBILE DTM Functin t change the instrument address f the cnnected sensr was included t set fr example a HART sensr t multidrp mde. WEB VV event Fr the definitin f the WEB VV event, further ptins are nw pssible: The data transmissin can nw als be carried ut in packed frm (Service-lgin required) The data transmissin is nw als pssible when a predefined measured value change is exceeded PACTware Advanced Scan All VEGA DTMs fr the plics as well as the plics plus instrument series were extended by functins t supprt the PACTware Advanced Scan. In PACTware this functin will be available frm versin 4.1. Placehlder DTM Due t the request f supprting the FDT Scan, the extensin f the device catalgue by the s called Placehlder DTMs fr HART, Prfibus and FF is required. The mentined DTMs are als used by the PACTware Advanced Scan. Sftware update Sftware update is nw carried ut via the assistant functin. The ZIP files frm the VEGA dwnlad sectin Sftware can nw be used by the DTM befre unpacking them first HART parameter MESSAGE All HART DTMs fr the plics and plics plus instrument series were extended by the pssibility t enter the parameters MESSAGE r LONGTAG

65 Versin histry: VEGA DTM Cllectin Well and flw measurement The DTMs fr the VEGAMET 391 and VEGAMET 624 instrument series had been extended in respect t the setup assistant. A separate user guidance especially fr the applicatin f a well measurement was included The setup f a flw measurement is nw pssible fr any curve frm by directly entering the flw frmula Fr the setup f a flw measurement fr a Parshall flume f Messrs. ISCO nly the flume type must be knwn, all ther parameters are available in the DTM With the three stated extensins, the DTM parameter pages Adjustment, Scaling and Linearizatin are autmatically preset wit the crrect values. The fllwing errrs were remved TankCalculatin With the calculatin f the linearizatin curves fr cylindrical tanks with different tps, faulty results were caused Instrument search The instrument search f the RS232 DTM finds nw als PLICSMOBILE instruments Service recrding The principle f peratin f the service recrding was changed s that it is ensured that all generated files will be updated when quitting the service recrding Ech curve In sme cases a displacement was caused with the indicatin f the measured value in the measured value windw and the measured value at the ech arrw in the ech curve presentatin. The tw measured values will nw by synchrnized. Multiviewer The fllwing errrs were remved: The presentatin f the device trend files with a recrding perid f mre than 24 days was nt pssible Fuzzy texts when generating PDF files Prblem f the G t functin in generated trend data VEGAPULS DTM The fllwing errr f the plics plus DTM was remved: Ech curve in sensr dcumentatin appears in m althugh ft is set Sftware update interrupts frm time t time with the message N cmmunicatin PROTRAC DTM The fllwing errrs were remved: Measurement f the backgrund radiatin r the pulse rate is nt pssible with instruments with sftware versin Prblems with the presentatin f the measured value memry (DTM), if measured values ccur which ur utside the indicatin range

66 Versin histry: VEGA DTM Cllectin DTM Cllectin 12 / 2010 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin VEGA-DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.10 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 12/2010, keep in mind that yu shuld have the actual versin PACTware TM 4.0 installed. In general All VEGA DTMs n this CD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7. This applies als t the included PACTware 4.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin but als the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.0 and adapted in an ptimum way t the frame applicatins. Fr a crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 must be available. The installatin f the VEGA DTM is nly pssible when this requirement is fulfilled. When installing via CD (Autrun), all required sftware cmpnents will be installed autmatically

67 Versin histry: VEGA DTM Cllectin New functins VEGAMET 391 SIL DTM The VEGAMET 391 is nw als available as versin SIL classified (SIL = safety integrity level). The VEGAMET 391 DTM was adapted respectively t the new versin. Apart frm the ptical signaling f the instrument versins with SIL qualificatin, the DTM was equipped with an adjustment cncept which is designed t the cncerns f the parameterizatin f safety-relevant parameters. This includes the verificatin f safetyrelevant parameters as well as the lcking f the instrument. POINTRAC DTM The instrument series PROTRAC was cmpleted by type POINTRAC 31. A DTM t supprt this instrument type was added accrdingly t the DTM Cllectin. The DTM supprts the parameter adjustment via HART bus as well as the direct cnnectin via a cnfiguratin interface n the instrument side thrugh VEGACONNECT 4. Cmmunicatin DTMs The layut f the cmmunicatin DTMs VEGA Ethernet and VEGA USB was adapted t the specificatins f the DTM Style Guide 1.1. PROTRAC DTM The imprt functin was cmpletely revised The sensr dcumentatin was cmpleted by different infrmatin such as fr example Backgrund radiatin The linearizatin was revised The diagnstics was cmpleted by further infrmatin The setup assistant was revised VEGAPULS DTM The DTMs fr the plics plus instrument series were extended by the fllwing functins: Indicatin f the Device ID adjusted in the instrument The imprt functin can either be carried ut with r withut address infrmatin The structure f the parameter tree in the navigatin sectin f the DTM parameter windw was revised Special parameters were cmpleted by the parameter Overfill safety Indicatin f the ech curve ffers extended presentatin ptins Measured value memry recrds nw als the reliability Diagnstics infrmatin was extended Service recrding includes nw als the event memry and the parameter mdificatin memry Lck adjustment influences nw als the imprt functin VEGA DTM Cnfiguratr The VEGA DTM Cnfiguratr was extended by an ptin t suppress the functin Lad ech curve autmatically during cnnectin. With this, the cnnectin can be accelerated with cnnectins with lw transmissin rate

68 Versin histry: VEGA DTM Cllectin WEB-VV event The assistant fr creating a WEB-VV event allws nw transmissin intervals frm 15 minutes. The fllwing errrs were remved USB driver The USB driver is nw als terminated with a frced terminatin f the PACTware instance. If this is nt pssible, a warning is displayed when starting PACTware fr the next time. Interperability Due t interperability prblems, the cmmunicatin with HART field devices f Messrs. Krhne via a VEGAMET was nt pssible. The errr was remved. Ech curve When shwing the ech curves in Standard reslutin, a cmpressed ech curve was spradically shwn. The errr was remved. Multiviewer Generating a trend curve ut f an existing ech recrding is nw als pssible with VEGAFLEX 61 t 66. Prject assistant Executin f the prject assistant with faded ut PACTware prject windw caused a prgram crash. Under certain cnditins, the prject assistant integrated the Generic Prfibus DTM int the prject fr all Prfibus sensrs. VEGABAR 74 HART was nt fund by the prject assistant. VEGABAR With the Prfibus versins f VEGABAR, the simulatin f SV1 was nt pssible when the unit m (metre) was used. The errr was remved. PROTRAC The cmmunicatin behaviur n the MGC was imprved VEGAPULS The fllwing errrs were remved n the DTMs fr the plics plus instrument series: Simulatin f the current value when changing ver the HART address frm Multidrp t Standard functins nw The adjustment f the unit fr the Secndary Value 2 was nt pssible with the FF versin Indicatin f the measured value as distance value in the navigatin sectin f the DTM parameter windw was nt pssible Peak values fr electrnics temperature were nt shwn in the sensr dcumentatin

69 Versin histry: VEGA DTM Cllectin Patch Publicatin date Sftware patch fr bug-fixing f VEGA-DTM versin respectively versin The patch is nly prvided as dwnlad versin: - Patch versin The fllwing errrs were remved plics plus-sensrs: Due t a malfunctin in the WHG device checker functinality f the VEGA-DTM f versin (based n DTM Cllectin 07/2010), the dwnlad f changed parameters int the sensr is blcked. This prblem nly refers t the plics plus sensrs with WHG apprval. plics(r)plus-sensrs: Crash when applying changes t the device in DTM-parameter page "Lck" r when pening the "Abut" dialg f DTM-Tls. This issues were nly bserved in VEGA-DTM versin Interperability with Freelance 9.2: Interperability issue with Freelance 9.2 (FDT frame applicatin f ABB) fixed. VEGAPULS SR 68 FF and VEGAPULS WL 61 FF: The issues n cnnecting t the mentined device types having "Fundatin Fieldbus" as cmmunicatin interface are fixed. There is n need t update the VEGA-DTM when perating ther instrument types

70 Versin histry: VEGA DTM Cllectin Patch Publicatin date The CD cntains the fllwing sftware cmpnents: - Patch versin The fllwing errrs were remved plics plus-sensrs: Due t a malfunctin in the WHG device checker functinality f the VEGA-DTM f versin (based n DTM Cllectin 07/2010), the dwnlad f changed parameters int the sensr is blcked. This prblem nly refers t the plics plus sensrs with WHG apprval. There is n need t update the VEGA-DTM when perating ther instrument types

71 Versin histry: VEGA DTM Cllectin DTM Cllectin 07 / 2010 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus Cmmunicatin DTM Versin 2.10 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 07/2010, keep in mind that yu shuld have the actual versin PACTware TM 4.0 installed. In general All VEGA DTMs n this CD are tested and released fr peratin under Micrsft Windws XP, Vista and Windws 7. This applies als t the included PACTware 4.0 FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin as well as the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 4.0 and adapted ptimally t these frame applicatins. The availability f the.net-framewrks 2.0 is a requirement fr the crrect functin f the new VEGA DTMs. The installatin f the VEGA DTM is nly pssible if this requirement is fulfilled. All required sftware cmpnents will be installed autmatically when installing via CD (Autrun)

72 Versin histry: VEGA DTM Cllectin New functins VEGAPULS Fundatin Fieldbus (FF) DTM The VEGAPULS instrument series (VEGAPULS 61 68) is nw available in the plics plus versin fr Fundatin Fieldbus. The DTMs fr the new functins were adapted accrdingly. The DTMs supprt the parameter adjustment via the FF bus as well as the direct cnnectin via the cnfiguratin interface n the instrument side via VEGACONNECT 4. VEGAPULS SR 68 DTM New are the VEGAPULS SR 68 DTMs. Supprted is the cmmunicatin via HART, Prfibus and FF but als the direct cnnectin via the cnfiguratin interface n the instrument side via I²C. VEGAPULS WL 61 DTM New are the VEGAPULS WL 61 DTMs. Supprted is the cmmunicatin via HART, Prfibus and FF but als the direct cnnectin via the cnfiguratin interface n the instrument side via I²C. PLICSMOBILE DTM Als new are the PLICSMOBILE DTMs fr supprt f the cmmunicatin cmpnents PLICSMOBILE and PLICSMOBILE T61. PROTRAC DTM Als new are the PROTRAC DTMs fr supprt f the PROTRAC instrument series (MINITRAC, SOLITRAC and FIBERTRAC). The DTMs supprt the parameter adjustment via the HART bus but als the direct cnnectin via the cnfiguratin interface n the instrument side via VEGACONNECT 4. Prject assistant If the prject assistant recgnizes when checking the instrument tplgy that nly ne instrument is cnnected, then the crrespnding DTM will be pened autmatically after adding it t the prject windw. VEGA DTM Cnfiguratr The prgram grup VEGA DTM Tls was nw cmpleted by the VEGA DTM Cnfiguratr. The VEGA DTM Cnfiguratr ffers the pssibility t define different settings fr the DTMs in respect t appearance and behaviur in a central psitin. Sensr dcumentatin The sensr dcumentatin f the plics plus versins was extended by a categry fr the data f the integrated additinal electrnics (4-wire HART). Electrnics exchange The electrnics exchange assistant checks the cmpatibility f the sensr data (XML file) befre dwnlading it int the electrnics. There is a differentiatin between three categries: Valid, warning, errr. If the XML file cntains deviating sensr data which are generally cmpatible with the electrnics, nly a warning appears, the user decides in this case if the data set shuld be nevertheless written int the electrnics. Hwever, if the XML file cntains sensr data with incmpatible deviatins, then the electrnics exchange assistant can nly be interrupted. Adjustment In the parameter adjustment page Adjustment, the actual measured value f the sensr system is nw displayed as a guide

73 Versin histry: VEGA DTM Cllectin Linearizatin table The cntext menu f the linearizatin table was extended by the functin Accept measured value. Dwnlad errr If the limit values are exceeded with ne r several parameters when taking ver device data, then a clear text message is utputted fr the cncerned parameters. The same parameter names are used which are als displayed in the DTM parameter pages. The dwnlad will be cntinued after cnfirming the message. Interperability Due t cnceptinal features f sme FDT frame applicatins, a pssibility was created t present the VEGA DTMs fr plics and plics plus as separate DTMs in the device catalgue. This presentatin frm can be necessary in Fieldmate (Ykgawa) and Meldy (ABB). The fllwing errrs were remved Upgrade t full versin The upgrade f an existing Standard versin t a Full versin is nw pssible withut a preceding deinstallatin. VEGAPULS DTM (plics plus versin) The applicatin type (liquid/bulk slid) is nw set crrectly with an electrnics exchange During cnnectin a WHG instrument is nw recgnized The simulatin f AI FBs fr Prfibus instruments is nw pssible VEGABAR 55 HART DTM Parameter page Display and Scaling are nw displayed. Service recrding The ech curve file was missing with the service recrding. This errr was remved. Change address in instrument Changing the instrument address is nt permitted fr users in the user rles Operatr and Observer. Sftware update Fr the instrument types VEGASON S61 and VEGASON S62, a sftware update was nt pssible. This errr was remved. Sensr dcumentatin After a data imprt cming frm a DTM (versin < ), the calibratin date is nw displayed crrectly. VEGAFLEX 67 In the ech curve indicatin the captin f the tw measured value arrws was exchanged. Level values culd nt be displayed in the indicatin f the DTM trend

74 Versin histry: VEGA DTM Cllectin Imprt VEGABAR When imprting data cming frm a DTM (versin < ), the adjustment values were nt interpreted crrectly when a unit f length was used as measured variable. Simulatin The prgram was interrupted when signs were entered with the simulatin. The errr was remved. TankCalculatin The graphic presentatin f the vessel gemetry functins nw als crrectly with mdified measuring unit

75 Versin histry: VEGA DTM Cllectin DTM Cllectin 04 / 2010 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin 1.1 SP1 - Micrsft.NET Framewrk Versin PACTware TM Versin 3.6 SP1 - VEGA-DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus Cmmunicatin DTM Versin 2.04 Nte: In the dwnlad sectin f the VEGA hmepage, yu have the pssibility t dwnlad individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 04/2010, keep in mind that yu shuld have the actual versin PACTware TM 3.6 SP1 installed. In general All VEGA DTMS f this CD are tested and released fr use under Micrsft Windws Vista and Windws 7. FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin as well as the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 3.6 SP1 and adapted ptimally t these frame applicatins. Fr the crrect functin f the new VEGA DTM,.NET-Framewrks 2.0 is a prerequisite apart frm.net-framewrk 1.1. The installatin f the VEGA DTM is nly pssible if these prerequisites are fulfilled. All required sftware cmpnents will be installed autmatically when installing via CD (Autrun)

76 Versin histry: VEGA DTM Cllectin New functins VEGAPULS Prfibus DTM The VEGAPULS instrument series (VEGAPULS 61 68) is nw available in the plics plus versin. The DTMs are adapted respectively fr the new functinality. The DTMs supprt the parameter adjustment via Prfibus as well as the direct cnnectin via the cnfiguratin interface n the instrument side thrugh VEGACONNECT 4. Histry n parameter changes Frm sftware versin 4.1.0, the VEGAPULS instrument series has a s-called parameter mdificatin memry, recrding and string all manipulatins f the parameter settings. The DTMs were extended respectively fr the indicatin and adjustment f this functin. Ech curve memry Frm sftware versin 4.1.0, the VEGAPULS instrument series has an instrumentinternal ech curve memry. The DTMs were extended respectively fr the indicatin and adjustment f this functin. Measurement in the free field Frm sftware versin 4.1.0, the VEGAPULS instrument series has the ptin Measurement in the free field. The DTMs were extended respectively. Linearizatin The calculatin assistant fr linearizatin curves can be pened nw directly in the parameter page Linearizatin. Als scaled values can nw be used in the table. Optimizatin f the assistant functins Cmplex adjustments were facilitated already in previus versins by s-called assistant functins. The assistant functins had been extended in such a way that frm nw n all data are autmatically accepted in the instrument after an assistant functin was carried ut. Ech curve The ech curve is nw displayed as a standard feature in all parameter adjustment pages where it is helpful t mnitr als the curve. The ech data are displayed tgether with the curve where it is useful fr lack f space. Interperability The interperability prblems with frame applicatins Fieldcare (E+H), Freelance (ABB) and Meldie (ABB) detected in versin are eliminated. Licensing Fr the DTMs f the previus instrument generatins (series 40/50), als the cmplete functin vlume is nw released in the standard versin. All DTMs, develped accrding t DTM Style Guide ffer nw a pssibility fr a later input f the licensing cde in the Inf n dialgue. The input f ne valid cde is sufficient t cnvert all installed VEGA DTMs t the full versin

77 Versin histry: VEGA DTM Cllectin The fllwing faults were remved VEGAPULS DTM When the sensr is in errr status, this is indicated als in the measured value windw. VEGAMET DTM Applicatin images crrespnd nw t the actually used sensr type. Misinterpretatins f sme data after the imprt are nw remved. An instrument search can nw als be started within the assistant t assign inputs. The assistant fr creating events was ptimised. VEGASCAN DTM The presentatin fr the measured value windw is mre clear nw and the unit fr scaled values is nw displayed in the crrect way. VEGABAR DTM The DTMs allw nw als negative values fr adjustment. Als the determinatin f the permissible limit values was imprved. VEGACONNECT 4 DTM The functin Change instrument address in the cntext menu f VEGACONNECT 4 DTM was imprved. PLICSRADIO R62 DTM The DTM was cmpleted by an indicatin clarifying the nline/ffline status. PLICSRADIO T61 DTM The cmmunicatin prblems t VEGAPULS sensrs frm sftware versin 4.0 are remved. PLICSRADIO C62 DTM The indicatin f the measurement lp TAG in the measured value view was crrected. VEGAMET 391 DTM Prblems during cnnectin t a VEGAMET 391 via USB (if the prject was created manually) are remved. The errr when writing the Ethernet address in the setup assistant is remved. VEGA Multiviewer The new VEGA Multiviewer supprts nw als the indicatin f DTM data files (exprt files) f frmer instrument generatins f series 40/50. The switching ver f the indicatin frm metres t feet was imprved. The cver sheet cntains nw additinal infrmatin n the imprvement f the traceability. VEGA DTM Selectr The VEGA DTM Selectr wrks nw als under Windws 7. False signal suppressin The presentatin f the ech curve is nw updated after each activity in respect t false signal suppressin. The prblems ccurred smetimes with Edit false signal are remved. Imprt functin The runding f the parameter adjustment values during imprt has nw the same number f cmmas after the decimal pint than that shwn in the DTM. The DTM functin Imprt was imprved in respect t the cmpatibility test f the DTM data file (exprt file) and target instrument. Print view The presentatin f the X/Y-axis fr the ech curve via the functin Print view was imprved

78 Versin histry: VEGA DTM Cllectin Electrnics exchange The DTM functin Electrnics exchange was imprved in respect t the cmpatibility test f sensr data (XML file) and replacement electrnics. Simulatin The limit values fr the simulatin are cnverted respectively when using the length unit ft. Event memry The srting accrding t date in the parameter adjustment page Event memry functins nw. Sensr dcumentatin The special parameters are nw displayed with index, analgue t the presentatin in the DTM. Simulatin The simulatin f measured values in the instrument remains active until it is undne by the DTM. If the cnnectin is nt discnnected crrectly, the instrument unds autmatically the simulatin peratin after a defined time. Linearizatin The errr relating t the assignment f linearizatin curves fr Venturi and Palmer- Bwlus is remved nw. The errr existed nly with plics instruments with sftware versin <

79 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2009 SP1 Publicatin date Only available via the dwnlad sectin and plics plus Setup DVD 01/2010 The DVD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin PACTware TM Versin 3.6 SP1 - VEGA DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus Cmmunicatin DTM Versin 2.04 Nte: In the dwnlad sectin n the VEGA hmepage yu have the pssibility t lad the individual sftware cmpnents available n the DVD. If yu want t use all functins f the VEGA DTM Cllectin 10/2009 SP1, make sure that yu have installed the actual versin PACTware TM 3.6 SP. General infrmatin The DVD cntains all cmpnents f the previusly supplied CD VEGA DTM Cllectin 10 / The difference t the CD is that fr the DVD sme errrs in the VEGA DTM had been remved that in the meantime came t ur ntice s that it will be supplied nw with versin New functins VEGABAR 55 The DTM fr the measuring principle Pressure/Hydrstatic was cmpleted by type VEGABAR 55. Supprted is the cmmunicatin via HART, Prfibus and FF but als the direct cnnectin via the cnfiguratin interface n the instrument side via I²C

80 Versin histry: VEGA DTM Cllectin The fllwing errrs were remved Device catalgue VEGAMET 391 DTM and PLICSRADIO DTMs appear nw als under the Turkish MS Windws in the device catalgue. Multiviewer The indicatin f the parameter adjustment values functins nw als fr lder exprt files (befre versin ). Interperability The interperability prblems ccurring in versin with the frame applicatins Fieldcare (E+H), Freelance (ABB), Meldie (ABB) and 800xA (ABB) are slved. Imprt Errr when imprting lder exprt files (frm versin ) is remved. False signal curve Errr when transmitting manually edited false signal curves is remved. Cnverting tl The cnverting tl "PW-PrjectCnverter.exe" is made available in the installatin directry f the VEGA-DTM. Electrnics exchange With the electrnics exchange, als the instrument ffset when exchanging a plics electrnics mdule with a plics plus electrnics mdule is nw adapted

81 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2009 Publicatin date The CD includes the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin Micrsft.NET Framewrk Versin PACTware TM Versin 3.6 SP1 - VEGA-DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus Kmmunikatins DTM Versin 2.04 Nte: In the dwnlad sectin n the VEGA hmepage yu have the pssibility t lad the sftware cmpnents available n CD individually. If yu want t use all functins f the VEGA DTM Cllectin 10/2009 make sure that yu have installed the actual PACTware TM 3.6 SP1 versin. General infrmatin All VEGA DTMs n this CD are tested and released fr use under Micrsft Windws Vista and Windws 7. FDT cnfrmity The VEGA DTMs had been develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin as well as the specificatins f the DTM Style Guide 1.1. The VEGA DTMs had been tested tgether with PACTware TM 3.6 SP1 and adapted ptimally t these frame applicatins. All cntents f the previus setups: DTM plics, DTM Cmmunicatin and DTM S40_50 are nw cmbined in the setup VEGA-DTM. Fr the crrect functin f the new VEGA DTM, als.net-framewrks 2.0 is a prerequisite apart frm.net-framewrk 1.1. The installatin f the VEGA DTM is nly pssible if these requirements are fulfilled. With the next installatin via CD (Autrun), all required sftware cmpnents will be installed autmatically

82 Versin histry: VEGA DTM Cllectin New functins VEGAPULS with extended functinality All DTMs f the VEGAPULS instrument series (VEGAPULS 61 68) supprt nw als the plics sensrs as well as the plics sensrs with increased functinality. During the prject generatin via the VEGA prject assistant, the changever is carried ut autmatically. With manually created prjects, the setting can be carried ut individually in the DTM under Cnfiguratin. Supprted is the cmmunicatin via HART as well as the direct cnnectin via the cnfiguratin interface n the instrument side via VEGA- CONNECT 4. VEGA cmmunicatin DTMs All relevant VEGA cmmunicatin r Gateway DTMs (VEGACONNECT 4, VEGAMET, VEGASCAN, PLICSRADIO) had been extended by the functin t differentiate plics and plics sensrs with increased functinality. VEGAMET 391 DTM The setup assistant ffers nw als the adjustment f Linearizatin and Scaling. The mdes fr pump cntrl were extended. Electrnics exchange All functins f the DTMs previusly available in the device catalgue as service DTMs are nw shifted t the standard device DTMs. The central functin t supprt the Electrnics exchange is nw available in the device DTMs under Device data Additinal functins Electrnics exchange. Other functins f the service DTM can nw be accessed directly in the parameter adjustment windw. The previus service DTMs are n mre available. Set bus address In the DTMs fr HART and Prfibus PA sensrs, the Optin dialgue was extended by the entry Change address in device. Hence, there is a pssibility t change the bus address f a sensr in case the used cmmunicatin DTM des nt ffer this functin. Menu structure in diagnsis pages The menu structures f the cntext menus f the parameter adjustment pages Ech curve, DTM trend and Device trend had been adapted. Sftware update The adjustment interface fr the sftware update was adapted fr all DTMs t the requirements f the DTM Style Guide 1.1. Fr sensrs with extended functinality, a prcedure fr the sftware update with cded surce files was intrduced. Activity range T avid faulty adjustment, the adjustment cncept was changed fr DTM parameter adjustment pages which can execute separate activities in the instruments such as fr example a Reset. Fr these DTM parameter adjustment pages, the buttns OK and Accept are generally blcked in the s-called Activity sectr. VEGA Multiviewer The VEGA Multiviewer was extended by the indicatin f the new file types frm the plics sensrs with increased functinality. Furthermre the functins Generate trend and Cmpare exprt files are again supprted with this versin

83 Versin histry: VEGA DTM Cllectin The fllwing errrs were remved VEGAFLEX 67 DTM The functin Calculated DK value was cmpleted. VEGAMET DTM Resetting f the ttalizer with VEGAMET 391 functins nw. The cmbinatin with VEGADIF 55 was imprved. Varius errrs in the applicatin assistant were remved. VEGABAR DTM The settings fr Applicatin and Adjustment are als accepted crrectly after imprting the data frm the device with the setting Prcess pressure. VEGAWELL 5x DTM The parameter adjustment page Device trend is nw ffered frm sftware versin 1.10 f the sensr. VEGA Multiviewer All file types that can be used in the VEGA Multiviewer are nw crrectly registered in the perating systems. Hence, they can be directly pened by duble clicking t the file name in the VEGA Multiviewer. Printing as PDF is nw als pssible. When starting, the Multiviewer uses nw the lastly selected language in a VEGA DTM. VEGA prject assistant The device types VEGADIF 65, VEGAPULS 67 and VEGASON S61 were nt fund in certain bus structures. This errr is nw remved. False signal suppressin The ptical respnse fr the user when executing an actin fr false signal suppressin was imprved. Furthermre, an autmatic uplad f the new curve is autmatically carried ut after executin. Imprt functin The errr message E129 during the dwnlad f imprted files with VEGAPULS DTMs des n lnger appear. Service recrding The DTM functin Service recrding creates nw the directry VEGA-Service in case it des nt exist n the cmputer. Sensr features Lading f the sensr features can nw be carried ut as ften as requested. With each lading prcess, the update f the indicatin in the DTM is carried ut. Windws with Asiatic character set On cmputers with Windws installatin using an Asiatic character set, the cnnectin t the instrument was nt pssible. This malfunctin was remved

84 Versin histry: VEGA DTM Cllectin DTM Cllectin 05 / 2009 Publicatin date The CD cntains the fllwing sftware cmpnents: - Micrsft.NET Framewrk Versin PACTware TM Versin 3.6 SP1 - VEGA plics DTM: Versin VEGA series 40/50 DTM: Versin VEGADIF 55 DTM: Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.03 Nte: In the dwnlad area n the VEGA hmepage, yu have the pssibility t lad the individual sftware cmpnents available n CD. If yu want t use all functins f the VEGA DTM Cllectin 05/2009, be sure that yu have the actual versin PACTware TM 3.6 SP1 installed. General All VEGA DTMs n this CD are tested and released fr use under Micrsft Windws Vista. FDT cnfrmity The VEGA DTMs were develped accrding t the latest requirements f the FDT Grup. They meet the requirements f the FDT specificatin as well as the requirements f the DTM Style Guide 1.1. The VEGA DTMs were tested tgether with PACTware TM 3.6 SP1 and adapted in an ptimum way t these frame applicatins. The cmplete cntent f the previus setup DTM plics and DTM Cmmunicatin is nw cmbined in ne setup VEGA plics DTM

85 Versin histry: VEGA DTM Cllectin New functins VEGAMET 391 DTM The VEGA DTMs were cmpleted by the VEGAMET 391 DTM fr adjustment f VEGAMET 391. VEGAMET 391 can be cnnected directly via a USB cable with the PC. Optinally, it is als pssible t perate the instrument via Ethernet r RS232. VEGA USB-DTM Fr direct peratin f VEGAMET 391 via USB, the cmmunicatin DTM VEGA USB- DTM was incrprated. VEGADIF 65 DTM Als new are the VEGADIF 65 DTMs. The cmmunicatin via HART, Prfibus and FF is supprted as well as the direct cnnectin via the I²C cnfiguratin interface n the instrument side. Ntes DTM Style Guide Except the cmmunicatin DTMs and the VEGACONNECT DTMs, all DTMs frm the setup VEGA plics DTM had been equipped with a new graphical user interface accrding t the DTM Style Guide 1.1. Cnversin f the technlgy Tgether with the cnversin f the user interface, als the technlgy fr develpment f the DTMs n NET 1.1 was cnverted and an update frm the FDT interface t FDT specificatin was carried ut. Due t the use f new technlgies, data (prject data, ech curve recrdings, trend recrdings, etc.) recrded with this DTM versin can n lnger be prcessed with the previus versins. Dwnward cmpatibility Despite the cmprehensive cnversins, all supplied DTMs are cmpletely dwnward cmpatible t all previus instrument versins. Furthermre, all data (prject data, ech curve recrdings, trend recrdings, etc.) recrded with lder DTM versins can be further prcessed with this DTM versin

86 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2008 Publicatin date The CD cntains the fllwing sftware cmpnents: - PACTware TM versin VEGA DTM Cllectin 10/2008 with DTM Cmmunicatin: versin DTM plics: versin DTM series 40/50: versin DTM DIF55 versin Micrsft.NET Framewrk versin HART Cmmunicatin DTM versin Generic HART DTM versin Prfibus Cmmunicatin DTM versin 2.03 Nte: In the dwnlad sectin n the VEGA hmepage yu can lad the individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 10/2008, make sure that yu have installed the latest versin PACTware TM 3.6. General All VEGA-DTM cntained n this CD are tested and released fr peratin under Micrsft Windws Vista. DTM certificatin All VEGA DTMs fr peratin f plics instruments are certified accrding t the guidelines f the FDT Grup. FDT cnfrmity The VEGA DTMs supprt the FDT 1.20 specificatin as well as the extensins accrding t FDT Addendum. They have been tested alng with PACTware TM 3.6 and adapted perfectly t this frame applicatin. PACTware TM 3.6 The new PACTware TM includes the fllwing revisins: - Supprt f Micrsft Windws Vista - Revisin f the user interface: - Device catalgue management - DTM identificatin - Settings fr print functin - Revised user guide with dwnlad functin - TCI (Tl calling interface) Level 3 fr invlvement f PACTware TM in engineering systems

87 Versin histry: VEGA DTM Cllectin New functins VEGA signal cnditining instruments as part f an verfill prtectin (WHG) The signal cnditining instruments VEGAMET 624 and VEGAMET 625 with Firmwareversin >1.90 are in cnfrmity with the apprval principles fr verfill prtectins (ZGÜS) and can basically be used as part f an verfill prtectin. The respective adjustment f the unit (WHG activatin) can be carried ut by the custmer by means f the new DTMs. SIL functin All VEGA sensrs which are SIL qualified are available either with fix activated SIL functin r with adjustable SIL functin. Fr sensrs with fix activated SIL functin, the SIL activatin cannt be eliminated via DTM (prtectin against unintentinal changes). VEGA prject assistant The VEGA prject assistant was extended as fllws: - The search functin will nw als find DTMs f ther manufacturers. - The determined values fr serial number, tag and address are nw als taken ver fr series 40/50 DTMs. VEGA service - DTM The VEGA service DTMs were extended as fllws: - Implementatin f the simplified electrnics exchange with parameter f lcal data file. - Cpy prtectin in case f deviant instrument type respectively deviant Firmwareversin (electrnics / parameter data file) has been cancelled and replaced by warning ntices. VEGA signal cnditining instruments with RS232 interface The VEGA signal cnditining instrument DTMs VEGAMET 624, VEGAMET 625, VEGASCAN 693 and PLICSRADIO C62 ffer imprved supprt fr the Dial-Out functin when using Serial t GPRS mdems. All VEGA DTM A safety query appears, if data are tried t be transfered int an instrument withut synchrnisatin f the DTM with the instrument. Thus, unintentinal verwriting with DTM standard parameter is avided. VEGACONNECT 4 - DTM The standard setting with VEGACONNECT 4 - DTM fr HART Cmmunicatin is nw preset with Secndary Master. The fllwing errrs were eliminated VEGA Multiviewer The prblem, that in case f generated trends deviatins in respect t time synchrny between ech curves and apprpriate index markers in the trend ccured, has been eliminated. Instrument dcumentatin The false ech data fr VEGAPULS series 60 sensrs are taken ver in the instrument dcumentatin with immediate effect

88 Versin histry: VEGA DTM Cllectin DTM Cllectin 11 / 2007 Publicatin date The CD cntains the fllwing sftware cmpnents: - PACTware TM versin VEGA DTM Cllectin 11/2007 with DTM Cmmunicatin: versin DTM plics: versin DTM series 40/50: versin DTM DIF55 versin Micrsft.NET Framewrk versin HART Cmmunicatin DTM versin Generic HART DTM versin Prfibus cmmunicatin DTM versin 2.03 Nte: In the dwnlad area f the VEGA hmepage yu have the pssibility t dwnlad the individual sftware cmpnents available n CD. If yu want t use all functins f the VEGA DTM Cllectin 11/2007, make sure that yu have installed the actual PACTware TM versin 3.5. General DTM certificatin: All VEGA DTMs fr peratin f plics instrument series are certified accrding t the regulatins f the FDT-Grup. FDT cnfrmity: VEGA DTMs supprt FDT 1.20 specificatin as well as all supplements accrding t the FDT Addendum. They had been tested tgether with PACTware TM 3.5 and adapted in an ptimum way t these frame applicatins. PACTware 3.5 The new PACTware includes the fllwing imprvements: - Cmpletely new adjustment surface with extended presentatin ptins - Pssibility t Save/Lad PACTware sessins - New prject presentatin ptin: Plant view - Mdified presentatin in the prject windw with srting functins - Imprved management f the device catalgue - Uplad/Dwnlad manager fr specific saving/lading f prject parts - Imprved clipbard functin - Imprved print functin with clear prject presentatin - High perfrmance als with very cmprehensive prjects (1000 ndes and mre) The layut f the graphic user surface had been imprved fr the cmplete VEGA DTM Cllectin fr ptimum integratin in PACTware 3.5. The adjustment elements nw als adapt t the Windws style. New functins

89 Versin histry: VEGA DTM Cllectin VEGASON S 61 and VEGASON S62 DTMs The VEGASON DTMs were extended by instrument types VEGASON S 61 and VEGASON S 62. Supprted is nly the cmmunicatin via the cnfiguratin interface n the instrument side via I²C. VEGAWELL 5X DTM The VEGAWELL DTMs were extended by the DTM VEGAWELL 5X fr adjustment f the sensr VEGAWELL 51 HART. Supprted is nly the cmmunicatin via HART. The sensr des nt have an additinal cnfiguratin interface n the instrument side. SIL fr VEGACAL The VEGACAL DTMs ffer nw SIL supprt fr VEGACAL types 62, 63, 64, 65 and 66 in HART versin. Service recrding All plics-dtms fr cntactlessly measuring instrument types had been extended in the menu Service functins by the ptin Service recrding. By starting the Service recrding, all DTM dcuments are generated and saved autmatically which are f relevance in cnjunctin with service activities (trend recrding, ech curve recrding and exprt data). Cmmunicatin prtcl: FF Cmmunicatin and adjustment f the plics instrument series with interface type FF by means f DTM is nw directly pssible via the FF-H1 r FF-H2 bus. VEGA service-dtms T carry ut the electrnics exchange, the VEGA service-dtms ffer nw als tw simplified assistant-driven prcedures. Furthermre VEGA Service DTMs ffer nw als an assistant t carry ut the ffset setting f cntactlessly measuring sensrs. VEGA Multiviewer The VEGA Multiviewer has been extended by the fllwing analysis functins: - Functin fr simplified cmparisn f DTM exprt files - Functin fr generatin f temprary trend files frm existing ech curve recrdings (*.crv files). VEGA Ethernet DTM The VEGA Ethernet-DTM has been extended by the fllwing functins: - Supprt f mdem ruters - Instrument search fr instruments with activated DHCP VEGA prject assistant The VEGA prject assistant has been extended in the fllwing items: - Identificatin f VEGA instruments even if they are using prfile-specific IDs - Identificatin f Prfibus instruments frm ther manufacturers (nly restricted) - Identificatin f VEGADIF 55 VEGAMET-DTM The DTMs fr VEGAMET 624/625 and VEGASCAN 693 were adapted t functin extensin f the stated instrument types. These are mainly: - Editing f the instruments as DHCP clients - Editing f the applicatin type Pressurized vessel (nly VEGAMET 625) - Indicatin f a HART cmmunicatin statistics t judge the cmmunicatin quality. The fllwing errrs had been remved

90 Versin histry: VEGA DTM Cllectin VEGAPULS 67 DTM The malfunctin fr nline parameter adjustment f VEGAPULS 67 fr Prfibus and FF via DTM has been remved. Tank Calculatin Access t Tank Calculatin frm the DTM is nw als supprted by the DTM language Dutch. Print device dcumentatin The print functin Print device dcumentatin fr PLICSRADIO wrks nw crrectly, previusly everything was printed duble. Zm fr ech curve presentatin The scaling f the X-axis functins nw als withut prblems with extremely magnified ech curves. Saving f IP addresses Saving f IP addresses by means f DTMs fr VEGACOM 558 functins nw

91 Versin histry: VEGA DTM Cllectin DTM Cllectin 01 / 2007 (2) Publicatin date General The sftware cmpnent VEGA DTM Cllectin: DTMplics 01 / 2007 (2) turned up as cmpletin t release 01 / The new sftware cmpnent with versin is nly available in the dwnlad sectin n the VEGA hmepage. New functins VEGAWELL 5x DTM The VEGAWELL DTMs were cmpleted by type VEGAWELL 5x. Simply cmmunicatin via HART is supprted. The DTM is used fr adjustment f VEGAWELL 51. The fllwing errrs had been remved Cmment field fr trend and ech curves is n taken ver int the print versin

92 Versin histry: VEGA DTM Cllectin DTM Cllectin 01 / 2007 Publicatin date The CD cntains the fllwing sftware cmpnents: - PACTware TM versin 3.0 SP4 - VEGA DTM Cllectin 01/2007 with DTM Cmmunicatin: versin DTM plics: versin DTM series 40/50: versin DTM DIF55 versin Micrsft.NET Framewrk versin HART Cmmunicatin DTM versin Generic HART DTM versin Prfibus cmmunicatin DTM versin 2.03 Nte: In the dwnlad area f the VEGA hmepage yu have the pssibility t dwnlad the individual sftware cmpnents available n CD. If yu want t use all functins f the VEGA DTM Cllectin 01/2007, make sure that yu have installed the actual PACTware TM versin 3.0 SP4. General DTM certificatin: All VEGA DTMs fr adjustment f the plics instrument series are certified accrding t the regulatins f the FDT grup. FDT cnfrmity: VEGA DTMs supprt FDT 1.20 specificatin as well as the extensins accrding t the FDT Addendum. They had been tested tgether with PACTware TM 3.0 SP4 and adapted ptimally t this frame applicatin. New functins Frm this versin, the fllwing instruments are als supprted: - PLICSRADIO C62, R61, R62, T61 and T62 Instrument cncept fr wireless remte transmissin f measured values - VEGACONNECT 4 Cmmunicatin adapter fr cnnectin t USB-prt - VEGADIF 55 Differential pressure transmitter fr cnnectin t HART bus systems VEGAPULS 67 DTM VEGAPULS DTMs had been cmpleted by the VEGAPULS 67 instrument type. The

93 Versin histry: VEGA DTM Cllectin cmmunicatin via HART and Prfibus as well as the direct cnnectin via the cnfiguratin n the instrument side thrugh I²C are supprted. VEGABAR 51 and 63 DTM VEGABAR DTMs had been cmpleted by the VEGABAR 51 and VEGABAR 63 instrument types. The cmmunicatin via HART and Prfibus as well as the direct cnnectin via the cnfiguratin n the instrument side thrugh I²C are supprted. Language Dutch Frm this versin, Dutch can be selected as language fr the DTMs. The nline help appears fr this selectin in English. The language f the displays n the instrument side can be als set t Dutch. DTM measured value and diagnstics windw Extended diagnstic ptins fr VEGASCAN and VEGAMET. The prgress bar appear nw in the status areas f measured value and diagnstics windw. Fr instruments with Ethernet r RS232 interface, the event lg n the instrument side can be requested. The diagnstics windw ffers nw infrmatin n the quality f the HART cmmunicatin. Linearizatin curves Fr VEGASCAN 693 it is nw pssible t adjust an individual, prgrammable linearizatin curve fr each measurement lp. The requirement n the instrument side t use this DTM functin is given frm firmware versin1.80. Dialling cnnectins The cnfiguratin f the RS 232 interface fr cmmunicatin prtcl PPP was simplified in respect t the setting fr Internet peratin via mdem (Dial-in / Dial-ut). This cncerns instrument types VEGAMET 624/625, VEGASCAN 693 as well as PLICSRADIO C62. Prject assistant The VEGA prject assistant (PACTware 3.0 AddIn) supprts nw the autmatic instrument search via USB interface fr VEGACONNECT 4. Message list The event list f VEGAMET 624/625, VEGASCAN 693 as well as PLICSRADIO C62 was extended fr peratin with Web-VV. and SMS messages can nw als be triggered in interval mde. SIL mde The DTMs f VEGAPULS 68, VEGABAR 51, VEGABAR 61 and VEGASON 6x instrument types ffer nw the activatin f the SIL mde. VEGA Multiviewer Extensin f the instrument dcumentatin in respect t infrmatin in the fter, adaptatin f the cver sheet and instrument identificatin. Imprvement f the readability when using very lng file names fr ech curve recrdings. Als extended search functins fr DTM trend and device trend recrdings. Special parameters New special parameters "Overfill recgnitin with prduct type liquid and "Crrectin f the spreading speed" fr VEGAFLEX plics sensrs (except FLEX 67). The fllwing errrs had been remved

94 Versin histry: VEGA DTM Cllectin Service DTM The Service DTM supprts nw the cnfiguratin f plics replacement electrnics units als if these are available withut basic initialisatin (instrument type = 60). Service DTM The instrument type was nt displayed with ultrasnic PLICS sensrs VEGASON 61 t 63. Imprt functin Depending n the initial cnditins, nt all imprted data were transmitted t the instrument after an imprt. In future, all custmer parameters as well as all special parameters (if they were selected fr imprt) are marked as changed after an imprt. This ensures that all imprted values unaffected by the last prject status will be transferred t the instruments with the next dwnlad. DTM trend The DTM trend recrding with PULS 61 HART did nt functin with certain basic cnditins. Device trend The device trend recrding with VEGAMET 624/625 and VEGASCAN 693 culd nt be started with certain basic cnditins

95 Versin histry: VEGA DTM Cllectin DTM Cllectin 04 / 2006 Date f issue The CD includes the fllwing sftware cmpnents: - PACTware TM Versin 3.0 SP3 - VEGA DTM Cllectin 4/2006 with DTM Cmmunicatin: Versin DTM plics: Versin DTM Series 40/50: Versin Micrsft.NET Framewrk Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus Cmmunicatin DTM Versin 2.02 Nte: In the dwnlad area f the VEGA hmepage yu can dwnlad the individual sftware cmpnents that are cntained n the CD. If yu want t benefit frm all functins f VEGA DTM Cllectin 4/2006, please make sure that the updated PACTware TM versin 3.0 SP3 is installed. General DTM certificatin: All VEGA DTMs fr adjustment f the plics instrument series are certified accrding t the guidelines f the FDT grup. FDT cnfrmity: The VEGA DTMs supprt the FDT 1.20 specificatin as well as the extensin accrding t the FDT Addendum. They were tested with PACTware TM Versin 2.4 SP2 and PACTware TM 3.0 SP3 and ptimally adapted t this frame applicatin. Interperability: The VEGA DTMs are als suitable fr all frame applicatins having implemented the FDT 1.2 Standard with FDT Addendum. VEGA is an active member f the wrking grup FDT Interperabilität f the FDT Grup. PACTware 3.0 SP3 VEGA DTM Cllectin is supplied with the latest PACTware versin. Beside smaller bugfixes, this versin was imprved in respect t instrument interperability. Thus, the stability f PACTware culd again be imprved in systems with hetergeneus instrument cnfiguratin. In additn, PACTware 3.0 SP3 ffers nw the adjustment in Russian language (Online assistance excluded)

96 Versin histry: VEGA DTM Cllectin New functins VEGACAL 67 The DTMs fr the capacitive measuring principle had been supplemented by VEGACAL 67. The cmmunicatin vie HART and Prfibus is supprted, as well as the direct cnnectin via the cnfiguratin interface n instrument site via I²C. VEGAPULS with increased sensitivity The VEGAPULS DTMs had been adapted t the instrument versins with increased sensitivity (illustratin f the ech curves, dcumentatin, Imprt/Exprt functin). VEGALOG DTM When reading ut the instrument data, VEGALOG DTM checks, if Prfibus and VBUS sensrs cnfigured t the measurement lps are actually cnnected, therwise the VEGALOG DTM reacts with a warning ntice. Measured value limitatins can nw als be activated fr VEGALOG measurement lps, the same applies t the current utputs.. Analysis f ech curves T simplify the cmparisn f ech curves, the zm functin was extended by the direct input f zm fields. This extensin cncerns all VEGAPULS, VEGASON and VEGAFLEX DTM f the plics series and the VEGA Multiviewer. VEGA Ethernet DTM The VEGA Ethernet DTM nw stres the IP addresses f the Ethernet instruments assigned t the prject, even if n licensing fr the signal cnditining instrument DTM was carried ut. PLICSCOM with backlight The updated versin f PLICSCOM is prvided with a backlight. The backlight can be activated and deactivated by means f the DTMs f the instrument families VEGASON, VEGAPULS, VEGAFLEX, VEGABAR and VEGACAL. PLICSCOM language adjustment The updated versin f PLICSCOM is prvided with a backlight. The languages Chinese and Japanese can be activated by means f the DTMs f the instrument families VEGASON, VEGAPULS and VEGAFLEX. VEGAFLEX DTM With VEGAFLEX DTM (plics series) basic adjustments can be easily carried ut by easy selecting the applicatin type. In additin the VEGAFLEX DTM supprts the evaluatin f the current DK value f the prduct t be measured. Adaptatin t ABB systems The VEGA DTM (plics series) had been ptimised under ABB systems in respect t multi-user peratin and bus cnfiguratin

97 Versin histry: VEGA DTM Cllectin The fllwing errrs had bee remved VEGAPULS DTM The input f the tube inner diameter in feet is pssible nw. Imprt functin Imprt f special parameters is nw pssible. Sftware update The DTMs f the instrument families VEGASON, VEGAPULS, VEGAFLEX, VEGABAR and VEGACAL enable nw the cancellatin f a sftware update. VEGA Multiviewer With the illustratin f trend recrds in the VEGA Multiviewer the axis identificatins fr VEGALOG and VEGAMET/SCAN had been imprved, with VEGALOG trend recrds the wrng indicatins f the units had been remved. VEGA Tank Calculatin When imprting tank gemetries linearisatin curves can nw als be imprted, which nly use a sectin f the tank. Prgram internal Frm this versin the mnitring system f the running time NuMega perates nly in the s-called Silent-Mde. Pssibly ccurring prgram internal cnflicts are nly displayed in the backgrund. The previus errr dialg is stpped

98 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2005 Publicatin date The CD includes the fllwing sftware cmpnents: - PACTware TM Versin 3.0 SP2 - VEGA DTM Cllectin 10/2005 with DTM Cmmunicatin: Versin DTM plics: Versin DTM series 40/50: Versin Micrsft.NET Framewrk Versin HART Cmmunicatin DTM Versin Generic HART DTM Versin Prfibus cmmunicatin DTM Versin 2.02 Nte: In the dwnlad sectin n the VEGA hmepage yu can lad the individual sftware cmpnents included n the CD. If yu want t use all functins f the VEGA DTM Cllectin 10/2005, yu shuld make sure that yu have installed the actual PACTware TM versin 3.0 SP2. General Certificatin: All VEGA DTMs fr adjustment f the plics instrument series are certified acc. t the directives f the FDT-Grup. Interperability: VEGA DTM supprt FDT 1.20 specificatin as well as the extensins acc. t FDT Addendum. They had been tested alng with PACTware TM versin 2.4 SP2 r PACTware TM 3.0 SP2 and adapted in an ptimum way t these frame applicatins. VEGA DTMs are als suitable fr use in all frame applicatins having the FDT 1.2 Standard with FDT Addendum implemented

99 Versin histry: VEGA DTM Cllectin New functins VEGACAL 69 DTMs fr the capacitive measuring principle had been cmpleted by VEGACAL 69. Cmmunicatin via HART and Prfibus as well as the direct cnnectin via the cnfiguratin n the instrument side via I²C are supprted. Adequate VEGALOG DTM Supplementary t the previus functin f the VEGALOG-DTM as pure Gateway-DTM, als the functin as instrument-dtm is available. Hence als the cmmunicatin and creatin f measurement lps can be carried ut centrally in the VEGALOG-DTM. Previusly the adjustment sftware VVO had t be used. The adjustment is harmnised and is carried ut in the same way as fr the knwn VEGA-DTMs. Nte: - Fr peratin as instrument-dtm a CPU sftware 2.0 r higher must be used in VEGALOG Only the basic applicatin types are supprted. See Functin verview VEGALOG in the dwnlad sectin f the VEGA hmepage fr detailed infrmatin Prfibus PA sensrs f individual manufacturers n VEGALOG 571 In future it is pssible t cmbine individual Prfibus PA sensrs (acc. t prfile 3) with the VEGALOG-DTM. Requirement is firmware versin 2.0 f the VEGALOG 571 CPU as well as firmware versin 1.50 f the VEGALOG 571 EP card. If the manufacturer f the respective Prfibus PA sensrs delivers a crrespnding DTM, this pssibility ffers a smth integratin f individual Prfibus PA sensrs in VEGALOG 571 frm the hardware t the adjustment. VEGA Generic Prfibus DTM If there is n crrespnding DTM fr the Prfibus PA sensr available when creating measurements n VEGALOG 571, the VEGA Generic Prfibus DTM can be used instead. Hwever, the use implies detailed knwledge f the Prfibus specificatin and is nly recmmended in exceptinal cases. Functinal safety acc. t SIL Fr mst plics sensrs with HART cnnectin, there is nw the pssibility t perate them in safety-relevant measuring systems acc. t SIL 2 r SIL 3. The DTMs ffer suitable supprt f this mde in respect t the preparatin f the sensrs and a permanently available indicatin f this perating cnditin in the DTMs. The fllwing plics sensrs are supprted: VEGASON frm firmware versin 3.26 VEGAFLEX frm firmware versin 3.23 VEGABAR 52, 54, 61, frm firmware versin 3.22 VEGAPULS frm firmware versin 3.22 VEGA prject assistant The VEGA prject assistant can nw als be used fr autmatic cnfiguratin f Prfibus prjects. Requirement is a precnfigured Prfibus cmmunicatin DTM in the prject. Furthermre the VEGA prject assistant nw als takes ver DTMs f ther manufacturers int the prject tree, as far as they can be clearly assigned t the instrument

100 Versin histry: VEGA DTM Cllectin VEGAMET/VEGASCAN Frm firmware versin 1.60, VEGAMET 624 / 625 and VEGASCAN 693 ffer the fllwing new functins: - integrated data lgger - SMS messages via VEGAMET - WHG apprvals - Access prtectin fr RS 232 cnnectin Frm this versin, the VEGAMET/VEGASCAN DTMs ffer cmplete supprt fr the creatin as well as use f the new VEGAMET functins. VEGAMET/VEGASCAN Frm firmware versin 1.70, VEGAMET 624 / 625 and VEGASCAN 693 ffer the fllwing new functins: - Tendency recgnitin - Pump cntrl Frm this versin, the VEGAMET/VEGASCAN DTMs ffer cmplete supprt fr the creatin as well as use f the new VEGAMET functins. The fllwing errrs had been remved Multiviewer Lading f ech curve recrdings (CRV files) frm CD is nw supprted. Mdem cnnectins The autmatic prject cnfiguratin via a mdem cnnectin is nw pssible. Operate DTM via keybard The pre-allcatin and sequence f the DTM adjustment elements was ptimised fr the keybard-riented use. Dwnlad f a DTM The dwnlad f instrument data f a VEGAMET/VEGASCAN Default-DTM can nw als be carried ut befre creating a measurement lp

101 Versin histry: VEGA DTM Cllectin DTM Cllectin 04 / 2005 Publicatin date The CD includes the fllwing sftware cmpnents: - PACTware TM versin VEGA DTM Cllectin 4/2005 with DTM Cmmunicatin: versin DTM plics: versin DTM series 40/50: versin Micrsft.NET Framewrk versin HART Cmmunicatin DTM versin Generic HART DTM versin Prfibus cmmunicatin DTM versin 1.10 (84) Nte: In the dwnlad sectin f the VEGA hmepage yu can lad the individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 4/2005, yu shuld take care that yu have installed the current PACTware TM versin 3.0. General Interperability: The VEGA DTMs supprt FDT 1.20 specificatin as well as the extensins acc. t FDT Addendum. They were tested tgether with PACTware TM versin 2.4 SP2 r PACTware TM 3.0 and adapted perfectly t these frm applicatins. The VEGA DTM are als suitable fr use in all frame applicatins having the FDT 1.2 Standard with FDT Addendum implemented. Micrsft.NET Framewrk: PACTware TM 3.0 was cmpletely revised and uses nw the latest sftware technlgies like Micrsft.NET. This cnversin enables use f mre efficient memry management mechanism and capsulatin f the individual DTMs. This means als that befre installing PACTware TM 3.0, Micrsft.NET-Framewrks must be installed. Prfibus cmmunicatin DTM: The supplied Prfibus cmmunicatin DTM f Messrs. Sfting is free f charge fr PACTware 3.0 prjects where licensed VEGA DTMs are used and can be used withut any limitatin

102 Versin histry: VEGA DTM Cllectin New functins Frm this versin, the fllwing instruments are als supprted: - VEGACAL 62, 63, 64, 65 and 66 plics HART, Prfibus PA, Fieldbus Fundatin* - VEGAFLEX 63 HART, Prfibus PA, Fieldbus Fundatin* * The DTM adjustment f instruments with cmmunicatin interface acc. t Fieldbus Fundatin is currently limited t the access via the cnfiguratin interface (I²C) n the instrument side. New DTMs fr the Capacitive measuring principle are nw available (see abve typ verview). Cmmunicatin via HART and Prfibus as well as the direct cnnectin via the cnfiguratin interface n the instrument-side via I²C are supprted. The DTMs fr the measuring principle Guided micrwave were cmpleted by type 63. Cmmunicatin via HART and Prfibus as well as the direct cnnectin via the cnfiguratin interface n the instrument-side via I²C are supprted. The DTMs fr VEGAMET 624 / 625 and VEGASCAN 693 allw fr the first time the creatin f particularly adapted measurement lps fr the sensr type VEGACAL. On the instrument-side the respective functin will be available fr the first time with versin The DTMs fr VEGAMET 624 / 625 and VEGASCAN 693 ffer nw als the pssibility t change ver t the VEGA-ASCII cmmunicatin prtcl. This prtcl ffers simple access t measured values via wn applicatins. On the instrument side, this functin is ffered in versin higher than Furthermre instruments must be equipped either with an Ethernet interface r an RS232 interface. The DTMs fr VEGAMET 624 / 625 and VEGASCAN 693 were ptimised in respect t the creatin and administratin f mailing lists. The mailing lists cntain all defined events and addressees f event-cntrlled messages. The VEGA-specific PACTware-AddIn VEGA prject assistant was extended fr us in lcal netwrks (LAN). If the VEGA prject assistant has fund several VEGA systems within a lcal netwrk, a checkbx dialg appears delivering a list f all fund VEGA measuring systems allwing a specific selectin f certain VEGA measuring systems. This mde can be switched ff. The fllwing errrs were remved Fault rectificatins/ptimisatins with VEGAMET DTM (cntext-sensitive help, frmatting and cntents f the instrument dcumentatin, warnings). Fault rectificatins/ptimisatins with VEGABAR DTM (frmatting and cntents f the sensr dcumentatin, cnversin in mmhg and inh2o). Fault during cnnecting t VEGAFLEX in versin 1.21 and

103 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2004 Publicatin date The CD includes the fllwing sftware cmpnents: - PACTware TM versin VEGA DTM Cllectin 10/2004 (versin ) - Micrsft.NET Framewrk versin HART Cmmunicatin DTM versin Generic HART DTM versin Prfibus cmmunicatin DTM versin 1.10 (84) Nte: In the dwnlad area n the VEGA hmepage yu can lad the individual sftware cmpnents available n the CD. If yu want t use all functins f the VEGA DTM Cllectin 10/2004, make sure that yu have installed the current PACTware TM versin 3.0. General Interperability: The VEGA DTMs supprt FDT 1.20 specificatin as well as the extensins acc. t FDT Addendum. They have been tested tgether with PACTware TM versin 2.4 SP2 r PACTware TM 3.0 and adapted in an ptimum way t these frame applicatins. The VEGA DTMs are als suitable fr use in all frame applicatins having the FDT 1.2 Standard with FDT Addendum implemented. Micrsft.NET Framewrk: PACTware TM 3.0 was cmpletely revised and uses nw latest sftware technlgies like Micrsft.NET. This cnversin enables the use f mre efficient memry management mechanisms and wrapping f the individual DTMs. This means als that befre installing PACTware TM 3.0, it is abslutely necessary t install Micrsft.NET-Framewrks. Prfibus cmmunicatin DTM: The supplied Prfibus cmmunicatin DTM frm Sfting requires n lnger an wn licensing. In PACTware 3.0 prjects where licensed VEGA DTMs are used, the Prfibus cmmunicatin DTM functins nw withut limitatins. Setup fr VEGA DTM Cllectin: The previus setup f VEGA DTM Cllectin was splitted int three single setups. Hence users requiring nly parts f the VEGA DTM Cllectin can make selectins. Furthermre the dwnlad times frm the VEGA hmepage reduce

104 Versin histry: VEGA DTM Cllectin New functins The fllwing interfaces/instruments are als supprted beginning with this versin: - VEGABAR 54 plics HART, Prfibus PA, Fieldbus Fundatin* - VEGASCAN 693 via VEGACONNECT, Ethernet, RS 232 * The DTM adjustment f instruments with cmmunicatin interface acc. t Fieldbus Fundatin is currently limited t the access via the cnfiguratin interface (I²C) n the instrument side. New DTMs fr the meas. principle Pressure/Hydrstatic are nw available (see abve type verview). The cmmunicatin via HART and Prfibus as well as the direct cnnectin via the cnfiguratin interface (I²C) n the instrument side are supprted. A DTM fr VEGASCAN 693 is als included. Cnfiguratin is made via VEGACONNECT (I²C interface) r directly via an additinal RS 232 r Ethernet interface. Up t 15 HART sensrs can be cnnected. Yu will find further infrmatin in the perating instructins manual f VEGASCAN 693 r in the nline help f VEGASCAN DTM. Cnfiguratin f event-cntrlled messages Instrument types VEGAMET 624 / 625 and VEGASCAN 693 supprt the transmissin f s in case f pre-defined events. All crrespnding DTMs had been revised and supprt the creatin f an accunt, the definitin f events as well as the creatin f the respective message. The DTMs fr VEGAMET 624 / 625 supprt als the adjustment via the interfaces RS 232 and Ethernet. The DTMs fr VEGAMET 624 / 625 and VEGASCAN 693 supprt nw the creatin f flw measurements. Especially n VEGAMET 624 / 625 the pulse utput can be als assigned t the measurement lps fr flw measurement. The creatin f interface measurements can nw be carried ut in a simple way by the DTM VEGAMET 625 by a s called assistant. The standard installatin directry f the VEGA DTM Cllectin was mdified. The VEGA DTM Cllectin installs nw under C:\Prgramme\VEGA\VEGADTM The VEGA Ethernet DTM was cmpletely revised. In the actual versin it is pssible t use several Ethernet-capable VEGA instruments at the same time via nly ne Ethernet DTM. In additin, functins fr address management f the cascade DTMs as well as fr autmatic instrument search were cmpleted. The VEGA-RS 232 DTM was extended. Additinal functins fr address management were added via the DTM cntext menu. The installatin rutines f the VEGA DTM Cllectin install in additin the PACTware- AddIn VEGA Prjektassistent. This AddIn fits autmatically in the surface f PACTware 3.0. This activates the functin extensin enabling the autmatic cnfiguratin f PACTware prjects. Currently the VEGA prject assistant supprts the autmatic cnfiguratin f prjects with VEGA instruments via the VEGA RS 232 DTM and the VEGA Ethernet DTM. If the VEGA prject assistant finds unknwn HART instruments, the assistant adds instead the Generic HART DTM (if installed). DTM trend functin was extended, this functins nw saves and visualises als additinal status infrmatin

105 Versin histry: VEGA DTM Cllectin The fllwing errrs were remved The setting fr recrding f scaled values in the device trend was previusly nt pssible fr plics sensrs with HART interface. Errr in the dcumentatin f series 40/50 HART sensrs (scaling) as well as VEGAMET 624/625 (display settings) is remved. Errr when pening the diagnstics page fr series 40/50 Prfibus sensrs is remved. Prgram-internal The mechanisms fr mnitring multi-access t an instrument can be nw switched ff. Switching ff can be necessary fr systems with very lw data thrughput

106 Versin histry: VEGA DTM Cllectin DTM Cllectin 04 / 2004 Publicatin date The CD cntains the fllwing sftware cmpnents: - PACTware TM versin 2.4 SP2 - VEGA DTM Cllectin 4/2004 (versin ) - HART prtcl driver versin Generic HART DTM versin Prfibus cmmunicatin-dtm versin 1.0 (62) - 30 days test versin - Nte: In the dwnlad area f the VEGA hmepage yu have the pssibility t lad the individual sftware cmpnents cntained n the CD. If yu want t use VEGA DTM Cllectin 4/2004 make sure that yu have installed the up-t-date PACTware TM versin 2.4 SP2. General Interperability: The VEGA DTMs supprt the FDT 1.20 specificatin as well as the extensins acc. t FDT Addendum. They were tested tgether with PACTware TM versin 2.4 SP2 and adapted perfectly t this frame applicatin. The VEGA DTMs are als suitable fr the use in all frame applicatins having the FDT 1.2 standard implemented. Frm nw n yu have the pssibility t enter ur new mailing list nline. An easy access t this list is pssible via the prgram grup VEGA - DTM Tls - Mailinglist DTM- Cllectin New functins The fllwing interfaces/instruments are als supprted frm this versin: - VEGASON 64, 65, 66 plics HART, Prfibus PA, Fieldbus Fundatin* - VEGAPULS 68 plics HART, Prfibus PA, Fieldbus Fundatin* - VEGAFLEX 66, 67 plics HART, Prfibus PA, Fieldbus Fundatin* - VEGAMET 624, 625 via VEGACONNECT * The DTM adjustment f instruments with cmmunicatin interface acc. t Fieldbus Fundatin is currently limited t the access via the cnfiguratin interface (I²C) n the instrument side. New DTMs fr the meas. principles Ultrasnic, Radar and Guided micrwave are nw available (see Type verview n tp f the page). Supprted are the cmmunicatin via HART and Prfibus, but als the direct cnnectin via the cnfiguratin interface I²C n the instrument side

107 Versin histry: VEGA DTM Cllectin New DTMs fr the VEGAMET 624 and VEGAMET 625 signal cnditining instruments are nw als included. The cnfiguratin is made via VEGACONNECT (I²C interface), cnnected can be 4-20mA sensrs but als HART sensrs. Fr further details see perating instructins manual VEGAMET 624/625 r nline help f the VEGAMET DTMs. The adjustment f the DTM address was adapted t the FDT specificatin. Previusly the target address must be set individually fr each sensr via the cntext menu. This functin was nw shifted t the cntext menu Mdify DTM addresses f the superir cmmunicatin-dtm. Hence the adjustment can be carried ut in centralised psitin. The DTMs nw use fr saving f ech curves, trends and exprt files always a cmmn, individually selectable directry. This directry is valid until anther directry is selected fr ne f the stated file types with Save as. Fr all DTMs supprting the recrding f ech curves (VEGAPULS, VEGAFLEX und VEGASON) an ptimised prcedure was implemented. This new prcedure has cnsiderably reduced the lading times as well as the data vlume. The mdes fr recrding f ech curves were extended. Via the menu Ech curve, the recrding mde f the ech data as well as the ech curve can be mdified. The standard setting fr the trend recrding was mdified. The trend recrding is n lnger started autmatically during cnnectin. The functinal vlume f the DTM-Tls Multiviewer was extended. The Multiviewer can nw als prcess device trends. Trend curves can nw als be exprted as ASCII files. T simplify the exchange f electrnics mdules, s called Service-DTMs are nw available. Due t these DTMs it is pssible t reset new electrnics mdules easily t the delivery status f the riginal electrnics. The DTMs fr adjustment f plics sensrs ffer nw a direct link t the VEGA dwnlad area. Via the menu entry Help Instrument dcumentatin in the web yu reach by nly ne key push the suitable dcuments t the pened DTM. In additin t the previusly adjustable languages, the DTMs nw ffer als the language Italian. The switching ver cncerns the cmplete adjustment as well as the nline help. The fllwing errrs were remved Interruptin f the lng-terms recrdings f ech curves r DTM trends withut interactin f the user. The previusly valid limitatins cncerning the trend functins during peratin in the FDT1.2 frame applicatins f ABB are n lnger applicable

108 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2003 (2) Publicatin date General The sftware cmpnent VEGA DTM Cllectin 10 / 2003 (2) Build includes nly failure remvals against release 10 / 2003 and is nly available in the dwnlad area. The fllwing failures were remved Licensing prblems with meas. principle Ultrasnic and plics sensrs Identificatin prblem f the service-dtm with meas. principle Ultrasnic and plics sensrs Further smaller bugfixes against release

109 Versin histry: VEGA DTM Cllectin DTM Cllectin 10 / 2003 Publicatin date The CD includes the fllwing sftware cmpnents: - PACTwareTM versin 2.4 SP2 - VEGA DTM Cllectin 10/2003 (Build ) - HART prtcl driver versin Generic HART DTM versin Prfibus cmmunicatin DTM versin 1.0 (62) - 30 days test versin - Nte: In the dwnlad sectin n the VEGA hmepage yu can lad the individual sftware cmpnents available n the CD. If yu want t use the VEGA DTM Cllectin 10/2003, make sure that yu have installed the latest versin PACTwareTM versin 2.4 SP2. General The VEGA DTMs supprt the FDT 1.20 specificatin as well as the extensins acc. T FDT Addendum. They have been tested alng with PACTwareTM versin 2.4 SP2 and adapted perfectly t this frame applicatin. The set-up ffers nw partial installatins f DTMs separated acc. t measuring principles. New functins Since this versin, the fllwing interfaces/instruments are supprted in additin: - VEGASON 61, 62, 63 plics HART, Prfibus PA, Fieldbus Fundatin* - VEGAPULS 61, 62, 63, 65, 66 plics Fieldbus Fundatin* - VEGAFLEX 61, 62, 65 plics Fieldbus Fundatin* - VEGABAR 52, 53 plics Fieldbus Fundatin* - VEGABAR 61, 64, 65, 66, 67 plics Fieldbus Fundatin* * The DTM adjustment f instruments with cmmunicatin interface acc. t Fieldbus Fundatin is actually limited t the access via the cnfiguratin interface (I²C) n the instrument side. New DTMs fr the measuring principle Ultrasnic with plics instruments are nw available (see VEGASON type verview n tp). Cmmunicatin via HART and Prfibus as well as the direct cnnectin via the cnfiguratin interface (I²C ) n the instrument side are supprted. All DTMs fr peratin with plics instruments have nw the functin Instrument trend. By means f this functin yu can make all necessary settings in the respective plics instrument fr recrding f measured values. In additin, these DTMs ffer als functins t read ut and analyse the recrdings. DTM versins histry Faist Octber

110 Versin histry: VEGA DTM Cllectin The prcedure t adjust the display frmat fr the PA-OUT value (with Prfibus PA sensrs) was changed. The setting is nw made via a separate list bx independent f the setting in OUT-SCALE. The standard settings fr the VEGA RS232 DTM (COM-Prt, parity) can be nw made via a separate cnfiguratin file frm the user Fr peratin under the Frame-Applicatin Symphnie (ABB) sme adaptatins were made. The functins printing, trend and linearisatin by means f the tank calculatin are nt available in this frame. The GSD files are nw saved in an editable versin in the installatin directry f the DTM Cllectin. The fllwing faults were remved In the functin Update instrument sftware there were ften cmmunicatin errrs r nn-reprducible indicatins f the prgress bar. The reasns fr this were lcalised and the wrng functin remved Up t nw, the cnfiguratin f pressure transmitters series D90 (Prfibus PA) fr cyclical cmmunicatin in ABB systems was nt pssible. DTM Cllectin 06 / 2003 Date f publicatin The CD includes the fllwing sftware cmpnents: - PACTware TM versin 2.4 SP2 - VEGA DTM cllectin 06/2003 (Build 1.35) - HART prtcl driver versin Generic HART DTM versin Prfibus cmmunicatin DTM versin 1.00 (62) - 30 days test versin - Nte: The sftware cmpnents included n the CD can be individually dwnladed n the VEGA hmepage. If yu want t use VEGA DTM cllectin 06/2003, please make sure that yu have installed the current PACTware TM versin 2.4 SP2. General The VEGA DTMs supprt the FDT 1.20 specificatin as well as the extensins acc. t FDT Addendum. They have been tested tgether with PACTware TM versin 2.4 SP2 and ptimally adapted t these frame applicatins