Battery charger DC-DC converter G C E Gate Collector Emitter. Base part number Package Type Standard Pack Complete Part Number

Transcription

1 AUTOMOTIVE GRADE AUIRGP462D AUIRGP462D-E INSULATED GATE BIPOLAR TRANSISTOR WITH C ULTRAFAST SOFT RECOVERY DIODE V CES = 6V Features Low V CE (on) Trench IGBT Technology I C(Nominal) = 24A Low Switching Losses 5μs SCSOA G Square RBSOA t SC 5μs, T J(max) = 75 C % of The Parts Tested for I LM Positive V CE (on) Temperature Coefficient. E Ultra Fast Soft Recovery Co-pak Diode V CE(on) typ. =.57V n-channel Lead-Free, RoHS Compliant Automotive Qualified * Benefits C C High Efficiency in a Wide Range of Applications Suitable for a Wide Range of Switching Frequencies due to Low V CE (ON) and Low Switching Losses Rugged Transient Performance for Increased Reliability E C E Excellent Current Sharing in Parallel Operation G Low EMI G C Applications Air Conditioning Compressor TO-247AC TO-247AD EV Inverter AUIRGP462D AUIRGP462D-E Battery charger DC-DC converter G C E Gate Collector Emitter Ordering Information Base part number Package Type Standard Pack Complete Part Number Form Quantity AUIRGP462D TO-247AC Tube 25 AUIRGP462D AUIRGP462D-E TO-247AD Tube 25 AUIRGP462D-E Absolute Maximum Ratings Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied.exposure to absolutemaximum-rated conditions for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Ambient temperature (T A ) is 25 C, unless otherwise specified Parameter Max. Units V CES Collector-to-Emitter Voltage 6 V I T C = 25 C Continuous Collector Current 55 I T C = C Continuous Collector Current 36 I NOMINAL Nominal Current 24 I CM Pulse Collector Current, V GE = 5V 72 I LM Clamped Inductive Load Current, V GE = 2V c 96 A I T C = 25 C Diode Continous Forward Current 55 I T C = C Diode Continous Forward Current 36 I FM Diode Maximum Forward Current d 96 V W T J Operating Junction and -55 to +75 T STG Storage Temperature Range C Soldering Temperature, for sec. (.6mm from case) 3 Mounting Torque, 6-32 or M3 Screw lbf in (.N m) Thermal Resistance Parameter Min. Typ. Max. Units R θjc (IGBT) Thermal Resistance Junction-to-Case (IGBT)e.69 R θjc (Diode) Thermal Resistance Junction-to-Case (Diode)e.2 C/W R θcs Thermal Resistance, Case-to-Sink (flat, greased surface).24 R θja Thermal Resistance, Junction-to-Ambient 4 V GE P T C = 25 C Continuous Gate-to-Emitter Voltage Maximum Power Dissipation ±2 27 P T C = C Transient Gate-to-Emitter Voltage Maximum Power Dissipation ±3 9 *Qualification standards can be found at International Rectifier May 2, 23

2 AUIRGP462D/AUIRGP462D-E Electrical T J = 25 C (unless otherwise specified) Parameter Min. Typ. Max. Units Conditions V (BR)CES Collector-to-Emitter Breakdown Voltage 6 V V GE = V, I C = μa f ΔV (BR)CES /ΔT J Temperature Coeff. of Breakdown Voltage.3 V/ C V GE = V, I C = ma (25 C-75 C) I C = 24A, V GE = 5V, T J = 25 C V CE(on) Collector-to-Emitter Saturation Voltage.87 V I C = 24A, V GE = 5V, T J = 5 C.94 I C = 24A, V GE = 5V, T J = 75 C V GE(th) Gate Threshold Voltage V V CE = V GE, I C = 7μA ΔV GE(th) /ΔTJ Threshold Voltage temp. coefficient -7 mv/ C V CE = V GE, I C =.ma (25 C - 75 C) gfe Forward Transconductance 2 S V CE = 5V, I C = 24A, PW = 2μs I CES Collector-to-Emitter Leakage Current. 25 μa V GE = V, V CE = 6V 3.5 ma V GE = V, V CE = 6V, T J = 75 C V FM Diode Forward Voltage Drop.57 I F = 24A.4 V I F = 9A.47 I F = 24A, T J = 75 C I GES Gate-to-Emitter Leakage Current ± na V GE = ±2V Switching T J = 25 C (unless otherwise specified) Parameter Min. Typ. Max. Units Conditions Q g Total Gate Charge (turn-on) 5 77 I C = 24A Q ge Gate-to-Emitter Charge (turn-on) 4 2 nc V GE = 5V Q gc Gate-to-Collector Charge (turn-on) 2 32 V CC = 4V E on Turn-On Switching Loss I C = 24A, V CC = 4V, V GE = 5V E off Turn-Off Switching Loss μj R G = Ω, L = 2μH, T J = 25 C E total Total Switching Loss Energy losses include tail & diode reverse recovery t d(on) Turn-On delay time 9 36 I C = 24A, V CC = 4V, V GE = 5V t r Rise time 24 4 ns R G = Ω, L = 2μH, T J = 25 C t d(off) Turn-Off delay time 9 9 t f Fall time 23 4 E on Turn-On Switching Loss 726 I C = 24A, V CC = 4V, V GE =5V E off Turn-Off Switching Loss 549 μj R G =Ω, L= 2μH,T J = 75 C f E total Total Switching Loss 275 Energy losses include tail & diode reverse recovery t d(on) Turn-On delay time 2 I C = 24A, V CC = 4V, V GE = 5V t r Rise time 23 ns R G = Ω, L = 2μH, L S = 5nH t d(off) Turn-Off delay time 92 T J = 75 C t f Fall time 84 C ies Input Capacitance 487 V GE = V C oes Output Capacitance 8 pf V CC = 3V C res Reverse Transfer Capacitance 44 f =.Mhz T J = 75 C, I C = 96A RBSOA Reverse Bias Safe Operating Area FULL SQUARE V CC = 48V, Vp 6V Rg = Ω, V GE = +2V to V SCSOA Short Circuit Safe Operating Area V CC = 4V, Vp 6V 5 μs Rg = Ω, V GE = +5V to V Erec Reverse Recovery Energy of the Diode 773 μj T J = 75 C t rr Diode Reverse Recovery Time 2 ns V CC = 4V, I F = 24A I rr Peak Reverse Recovery Current 32 A V GE = 5V, Rg = Ω, L =2μH Notes: V CC = 8% (V CES ), V GE = 2V, L = 2μH, R G = 5Ω. Pulse width limited by max. junction temperature. ƒ R θ is measured at T J of approximately 9 C. Maximum limits are based on statistical sample size characterization International Rectifier May 2, 23

3 I CE (A) I CE (A) I C (A) I C (A) I C (A) P tot (W) AUIRGP462D/AUIRGP462D-E Fig. - Maximum DC Collector Current vs. Case Temperature T C ( C) T C ( C) Fig. 2 - Power Dissipation vs. Case Temperature μsec μsec msec DC. Tc = 25 C Tj = 75 C Single Pulse Fig. 3 - Forward SOA T C = 25 C, T J 75 C; V GE =5V Fig. 4 - Reverse Bias SOA T J = 75 C; V GE = 2V 8 6 VGE = 8V VGE = 5V VGE = 2V VGE = V VGE = V VGE = 9.V VGE = 8.V VGE = 7.V VGE = 8V VGE = 5V VGE = 2V VGE = V VGE = V VGE = 9.V VGE = 8.V VGE = 7.V Fig. 5 - Typ. IGBT Output Characteristics T J = -4 C; tp = 2μs Fig. 6 - Typ. IGBT Output Characteristics T J = 25 C; tp = 2μs International Rectifier May 2, 23

4 I CE (A) I F (A) AUIRGP462D/AUIRGP462D-E 8 6 VGE = 8V VGE = 5V VGE = 2V VGE = V VGE = V VGE = 9.V VGE = 8.V VGE = 7.V 8 6 T J = -4 C T J = 25 C T J =75 C Fig. 7 - Typ. IGBT Output Characteristics T J = 75 C; tp = 2μs V F (V) Fig. 8 - Typ. Diode Forward Characteristics tp = 2μs I CE = 2A I CE = 24A I CE = 48A 4 I CE = 2A I CE = 24A I CE = 48A V GE (V) V GE (V) Fig. 9 - Typical V CE vs. V GE T J = -4 C Fig. - Typical V CE vs. V GE T J = 25 C 8 6 I CE = 2A I CE = 24A I CE = 48A I C, Collector-to-Emitter Current (A) 8 6 T J = 25 C T J = 75 C V GE (V) V GE, Gate-to-Emitter Voltage (V) Fig. - Typical V CE vs. V GE T J = 75 C Fig. 2 - Typ. Transfer Characteristics V CE = 5V; tp = 2μs International Rectifier May 2, 23

5 I RR (A) I RR (A) Energy (μj) Swiching Time (ns) Energy (μj) Swiching Time (ns) AUIRGP462D/AUIRGP462D-E 25 2 td OFF 5 E ON t F t R td ON 5 E OFF I C (A) I C (A) Fig. 3 - Typ. Energy Loss vs. I C T J = 75 C; L = 2μH; V CE = 4V, R G = Ω; V GE = 5V 2 Fig. 4 - Typ. Switching Time vs. I C T J = 75 C; L = 2μH; V CE = 4V, R G = Ω; V GE = 5V 6 E ON td OFF 2 t F 8 E OFF t R td ON R G (Ω) R G (Ω) Fig. 5 - Typ. Energy Loss vs. R G T J = 75 C; L = 2μH; V CE = 4V, I CE = 24A; V GE = 5V 35 Fig. 6 - Typ. Switching Time vs. R G T J = 75 C; L = 2μH; V CE = 4V, I CE = 24A; V GE = 5V 35 3 R G = Ω 3 25 R G = 22Ω R G = 47Ω 2 R G = Ω I F (A) R G (Ω) Fig. 7 - Typ. Diode I RR vs. I F T J = 75 C Fig. 8 - Typ. Diode I RR vs. R G T J = 75 C International Rectifier May 2, 23

6 Capacitance (pf) V GE, Gate-to-Emitter Voltage (V) Energy (μj) Time (μs) I RR (A) Q RR (nc) AUIRGP462D/AUIRGP462D-E A Ω 25 3 Ω 47Ω 22Ω 24A 2 2 2A di F /dt (A/μs) Fig. 9 - Typ. Diode I RR vs. di F /dt V CC = 4V; V GE = 5V; I F = 24A; T J = 75 C di F /dt (A/μs) Fig. 2 - Typ. Diode Q RR vs. di F /dt V CC = 4V; V GE = 5V; T J = 75 C R G = Ω R G = 22Ω R G = 47Ω 2 8 T sc I sc 2 5 Current (A) 5 R G = Ω I F (A) Fig. 2 - Typ. Diode E RR vs. I F T J = 75 C V GE (V) Fig V GE vs. Short Circuit Time V CC = 4V; T C = 25 C 4 V CES = 4V Cies 2 V CES = 3V 8 Coes 6 Cres Q G, Total Gate Charge (nc) Fig Typ. Capacitance vs. V CE V GE = V; f = MHz Fig Typical Gate Charge vs. V GE I CE = 24A; L = 585μH International Rectifier May 2, 23

7 AUIRGP462D/AUIRGP462D-E Thermal Response ( Z thjc )... D = SINGLE PULSE ( THERMAL RESPONSE ) R R 2 R 3 R R 2 R 3 τ J τ J τ τ τ 2 τ 3 τ 2 τ 3 Ci= τi/ri Ci i/ri Ri ( C/W) τi (sec) Notes:. Duty Factor D = t/t2 2. Peak Tj = P dm x Zthjc + Tc. E-6 E t, Rectangular Pulse Duration (sec) τ C τ Fig 25. Maximum Transient Thermal Impedance, Junction-to-Case (IGBT) Thermal Response ( Z thjc )... D = SINGLE PULSE ( THERMAL RESPONSE ) R R R 2 R 2 R 3 R 3 τ J τ J τ τ τ 2 τ 2 τ 3 τ 3 Ci= τi/ri Ci i/ri R 4 Ri ( C/W) τi (sec) R Notes:. Duty Factor D = t/t2 2. Peak Tj = P dm x Zthjc + Tc. E-6 E t, Rectangular Pulse Duration (sec) Fig. 26. Maximum Transient Thermal Impedance, Junction-to-Case (DIODE) τ 4 τ 4 τ C τ International Rectifier May 2, 23

8 AUIRGP462D/AUIRGP462D-E L L K DUT VCC 8 V + - Rg DUT VCC Fig.C.T. - Gate Charge Circuit (turn-off) Fig.C.T.2 - RBSOA Circuit diode clamp / DUT L 4X DC DUT VCC -5V Rg DUT / DRIVER VCC SCSOA Fig.C.T.3 - S.C. SOA Circuit Fig.C.T.4 - Switching Loss Circuit R = VCC ICM DUT VCC Rg Fig.C.T.5 - Resistive Load Circuit International Rectifier May 2, 23

9 AUIRGP462D/AUIRGP462D-E 6 5 tf tr % I CE 4 3 I CE (A) % / TEST CURRENT 4 3 I CE (A) 2 5% V CE % I CE - Eoff Loss time(μs) % / 5% V CE Eon Loss time (μs) Fig. WF - Typ. Turn-off Loss T J = 75 C using Fig. CT.4 Fig. WF2 - Typ. Turn-on Loss T J = 75 C using Fig. CT I F (A) t RR Q RR Vce (V) VCE ICE Ice (A) -4-2 Peak I RR time (μs) Time (us) Fig. WF3 - Typ. Diode Recovery T J = 75 C using Fig. CT.4 Fig. WF4 - Typ. S.C. T J = 25 C using Fig. CT International Rectifier May 2, 23

10 AUIRGP462D/AUIRGP462D-E TO-247AC Package Outline Dimensions are shown in millimeters (inches) TO-247AC Part Marking Information LC LC Note: For the most current drawing please refer to IR website at International Rectifier May 2, 23

11 AUIRGP462D/AUIRGP462D-E TO-247AD Package Outline Dimensions are shown in millimeters (inches) TO-247AD Part Marking Information LC LC Note: For the most current drawing please refer to IR website at International Rectifier May 2, 23

12 AUIRGP462D/AUIRGP462D-E Qualification Information Automotive (per AEC-Q) Qualification Level Comments: This part number(s) passed Automotive qualification. IR s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. Moisture Sensitivity Level Machine Model ESD Human Body Model Charged Device Model RoHS Compliant 3L-TO-247AC 3L-TO-247AD N/A Class M4 (+/- 7V ) (per AEC-Q-2) Class HC (+/- 2V ) (per AEC-Q-) Class C5(+/- 2V ) (per AEC-Q-5) Yes Qualification standards can be found at International Rectifier s web site: http// Highest passing voltage International Rectifier May 2, 23

13 AUIRGP462D/AUIRGP462D-E IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the AU prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense, are designed and manufactured to meet DLA military specifications required by certain military, aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in applications requiring military grade products, is solely at the Buyer s own risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 6949 requirements and bear a part number including the designation AU. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements. For technical support, please contact IR s Technical Assistance Center WORLD HEADQUARTERS: N. Sepulveda Blvd., El Segundo, California 9245 Tel: (3) International Rectifier May 2, 23