SEMICONDUCTOR TECHNICAL DATA

Size: px

Start display at page:

Download "SEMICONDUCTOR TECHNICAL DATA"

Basil Perkins
5 years ago
Views:

1 SEMICONDUCTOR TECHNICAL DATA Order this document by MOC8020/D The MOC8020 and MOC802 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon photodarlington detector. The chip to Pin 6 base connection has been eliminated to improve the device s output performance in higher noise environments. No Base Connection for Improved Noise Immunity Higher Sensitivity to Low Input Drive Current To order devices that are tested and marked per VDE 0884 requirements, the suffix V must be included at end of part number. VDE 0884 is a test option. Applications Appliances, Measuring Instruments I/O Interfaces for Computers Programmable Controllers Portable Electronics Interfacing and coupling systems of different potentials and impedances Solid State Relays Circuits Exposed to High Noise Environments MAXIMUM RATINGS (TA = 25 C unless otherwise noted) INPUT LED Rating Symbol Value Unit Reverse Voltage VR 3 Volts Forward Current Continuous IF 60 ma LED Power TA = 25 C with Negligible Power in Output Detector Derate above 25 C OUTPUT DETECTOR PD 20.4 mw mw/ C Collector Emitter Voltage VCEO 50 Volts Collector Current Continuous IC 50 ma Emitter Collector Voltage VECO 5 Volts Detector Power TA = 25 C with Negligible Power in Input LED Derate above 25 C TOTAL DEVICE GlobalOptoisolator Isolation Surge Voltage() (Peak ac Voltage, 60 Hz, sec Duration) PD mw mw/ C VISO 7500 Vac(pk) 2 3 [CTR = 500% Min] [CTR = 000% Min] STYLE 3 PLASTIC 6 STANDARD THRU HOLE CASE 730A 04 SCHEMATIC PIN. LED ANODE 2. LED CATHODE 3. N.C. 4. EMITTER 5. COLLECTOR 6. N.C Total Device Power TA = 25 C Derate above 25 C PD mw mw/ C Ambient Operating Temperature Range(2) TA 55 to +00 C Storage Temperature Range(2) Tstg 55 to +50 C Soldering Temperature (0 sec, /6 from case) TL 260 C. Isolation surge voltage is an internal device dielectric breakdown rating.. For this test, Pins and 2 are common, and Pins 4 and 5 are common. 2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions. GlobalOptoisolator is a trademark of Motorola, Inc. REV Motorola, Inc. Optoelectronics 995 Device Data

2 ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted)() INPUT LED Reverse Leakage Current (VR = 3 V) Forward Voltage (IF = 0 ma) Capacitance (V = 0 V, f = MHz) Characteristic Symbol Min Typ() Max Unit PHOTODARLINGTON (TA = 25 C and IF = 0, unless otherwise noted) Collector Emitter Dark Current (VCE = 0 V) Collector Emitter Base Breakdown Voltage (IC = ma) Emitter Collector Breakdown Voltage (IE = 00 µa) COUPLED (TA = 25 C unless otherwise noted) Collector Output Current (VCE = 5 V, IF = 0 ma) MOC8020 MOC802 IR µa VF.5 2 Volts C 8 pf ICEO 00 na V(BR)CEO 50 Volts V(BR)ECO 5 Volts IC (CTR)(2) 50 (500) 00 (000) ma (%) Isolation Surge Voltage(3,4), 60 Hz Peak ac, Second VISO 7500 Vac(pk) Isolation Resistance(3) (V = 500 V) Isolation Capacitance(3) (V = 0, f = MHz) SWITCHING RISO 0 Ohms CISO 0.2 pf Turn On Time ton 3.5 µs Turn Off Time Rise Time VCC = 0 V, RL = 00 Ω, IF = 5 ma(5) toff 95 tr Fall Time tf 2. Always design to the specified minimum/maximum electrical limits (where applicable). 2. Current Transfer Ratio (CTR) = IC/IF x 00%. 3. For this test, LED Pins and 2 are common and Phototransistor Pins 4 and 5 are common. 4. Isolation Surge Voltage, VISO, is an internal device dielectric breakdown rating. 5. For test circuit setup and waveforms, refer to Figure 9. TYPICAL CHARACTERISTICS VF, FORWARD VOLTAGE (VOLTS) TA = 55 C PULSE ONLY PULSE OR DC 25 C 00 C IF, LED FORWARD CURRENT (ma) IC, OUTPUT COLLECTOR CURRENT (NORMALIZED) NORMALIZED TO: IF = 0 ma TA = 25 C TA = 55 C THRU +25 C +70 C +00 C IF, LED INPUT CURRENT (ma) Figure. LED Forward Voltage versus Forward Current Figure 2. Output Current versus Input Current 2 Motorola Optoelectronics Device Data

3 I, COLLECTOR CURRENT (ma) I I C IF = 0 ma 5 ma 2 ma ma VCE, COLLECTOR EMITTER VOLTAGE (VOLTS), OUTPUT COLLECTOR CURRENT (NORMALIZED) C NORMALIZED TO TA = 25 C TA, AMBIENT TEMPERATURE ( C) Figure 3. Collector Current versus Collector Emitter Voltage Figure 4. Output Current versus Ambient Temperature V CE, COLLECTOR EMITTER VOLTAGE (NORMALIZED) NORMALIZED TO TA = 25 C TA, AMBIENT TEMPERATURE ( C) CEO, COLLECTOR EMITTER DARK CURRENT (NORMALIZED) NORMALIZED TO: VCE = 0 V TA = 25 C VCE = 30 V 0 V TA, AMBIENT TEMPERATURE ( C) Figure 5. Collector Emitter Voltage versus Ambient Temperature Figure 6. Collector Emitter Dark Current versus Ambient Temperature t, TIME ( µ s) 00 0 RL = VCC = 0 V t, TIME ( µ s) 00 0 RL = VCC = 0 V IF, LED INPUT CURRENT (ma) IF, LED INPUT CURRENT (ma) Figure 7. Turn On Switching Times (Typical Value) Figure 8. Turn Off Switching Times (Typical Value) Motorola Optoelectronics Device Data 3

4 TEST CIRCUIT VCC = 0 V WAVEFORMS INPUT PULSE IF = 5 ma INPUT RL = 00 Ω OUTPUT 0% 90% OUTPUT PULSE tr tf ton toff Figure 9. Switching Time Test Circuit and Waveforms 4 Motorola Optoelectronics Device Data

5 PACKAGE DIMENSIONS A B NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. T SEATING PLANE F 4 PL E 6 PL N C L K G M D 6 PL 0.3 (0.005) M T A M B M J 6 PL 0.3 (0.005) M T B M A M INCHES MILLIMETERS DIM MIN MAX MIN MAX A B C D E F G 0.00 BSC 2.54 BSC J K L BSC 7.62 BSC M N STYLE 3: PIN. ANODE 2. CATHODE 3. NC 4. EMITTER 5. COLLECTOR 6. NC CASE 730A 04 ISSUE G A B NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, CONTROLLING DIMENSION: INCH. F 4 PL E 6 PL G H D 6 PL C L K 6 PL 0.3 (0.005) M T A M B M J T SEATING PLANE 0.3 (0.005) M T B M A M CASE 730C 04 ISSUE D INCHES MILLIMETERS DIM MIN MAX MIN MAX A B C D E F G 0.00 BSC 2.54 BSC H J K L BSC 8.3 BSC S *Consult factory for leadform option availability Motorola Optoelectronics Device Data 5

6 F 4 PL T SEATING PLANE A 6 4 B 3 N L C G K D 6 PL J NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. INCHES MILLIMETERS DIM MIN MAX MIN MAX A B C D E F G 0.00 BSC 2.54 BSC J K L N E 6 PL 0.3 (0.005) M T A M B M *Consult factory for leadform option availability CASE 730D 05 ISSUE D Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi SPD JLDC, Toshikatsu Otsuki, P.O. Box 2092; Phoenix, Arizona F Seibu Butsuryu Center, Tatsumi Koto Ku, Tokyo 35, Japan MFAX: RMFAX0@ .sps.mot.com TOUCHTONE (602) HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, INTERNET: NET.com 5 Ting Kok Road, Tai Po, N.T., Hong Kong Motorola Optoelectronics MOC8020/D Device Data

SEMICONDUCTOR TECHNICAL DATA

SEMICONDUCTOR TECHNICAL DATA Order this document by N/D The N, N and N7 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector.