MPSL51. Amplifier Transistor PNP Silicon MAXIMUM RATINGS. THERMAL CHARACTERISTICS

Transcription

1 Amplifier Transistor PNP Silicon MAXIMUM RATINGS Rating Symbol alue Unit Collector Emitter oltage CEO dc Collector Base oltage CBO dc Emitter Base oltage EBO 4. dc Collector Current Continuous I C 6 madc Total Device T A = 5 C Derate above 5 C P D mw mw/ C 1 TO 9 (TO 6AA) CASE 9 11 STYLE 1 Total Device T C = 5 C Derate above 5 C Operating and Storage Junction Temperature Range THERMAL CHARACTERISTICS P D W mw/ C T J, T stg 55 to +1 C Characteristic Symbol Max Unit Thermal Resistance, Junction to Ambient R JA C/W Thermal Resistance, Junction to Case R JC 8. C/W BASE COLLECTOR 1 EMITTER ELECTRICAL CHARACTERISTICS (T A = 5 C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector Emitter Breakdown oltage (1) (I C = madc, I B = ) (BR)CEO dc Collector Base Breakdown oltage (I C = Adc, I E = ) Emitter Base Breakdown oltage (I E = 1 Adc, I C = ) Collector Cutoff Current ( CB = dc, I E = ) Emitter Cutoff Current ( EB =. dc, I C = ) (BR)CBO dc (BR)EBO 4. dc I CBO μadc I EBO nadc 1. Pulse Test: Pulse Width = s, Duty Cycle =.%. Semiconductor Components Industries, LLC, 6 August, 6 Rev. 1 Publication Order Number: MPSL51/D

2 ELECTRICAL CHARACTERISTICS (T A = 5 C unless otherwise noted) (Continued) Characteristic Symbol Min Max Unit ON CHARACTERISTICS (1) DC Current Gain (1) (I C = madc, CE = 5. dc) h FE 4 Collector Emitter Saturation oltage (I C = 1 madc, I B = madc) (I C = madc, I B = 5. madc) Base Emitter Saturation oltage (I C = 1 madc, I B = madc) (I C = madc, I B = 5. madc) SMALL SIGNAL CHARACTERISTICS Current Gain Bandwidth Product (I C = 1 madc, CE = 1 dc, f = MHz) Output Capacitance ( CB = 1 dc, I E =, f = MHz) Small Signal Current Gain (I C = madc, CE = 1 dc, f = khz) CE(sat) BE(sat) dc dc f T 6 MHz C obo 8. pf h fe 1. Pulse Test: Pulse Width = s, Duty Cycle =.%.

3 1 T J = 15 C h FE, CURRENT GAIN 55 C 5 C CE = CE = Figure 1. DC Current Gain CE, COLLECTOR EMITTER OLTAGE (OLTS) I C = ma 1 ma ma ma I B, BASE CURRENT (ma) Figure. Collector Saturation Region 1, COLLECTOR CURRENT ( A) μ IC CE = T J = 15 C 75 C REERSE 5 C I C = I CES FORWARD BE, BASE EMITTER OLTAGE (OLTS) Figure. Collector Cut Off Region

4 , OLTAGE (OLTS) I C /I B = I C /I B = Figure 4. On oltages, TEMPERATURE COEFFICIENT (m/ C) θ.5 T J = 55 C to 15 C θ C for CE(sat) θ B for BE(sat) Figure 5. Temperature Coefficients BB+ 8.8 CC 1. in 1 μs INPUT PULSE t r, t f 1 ns DUTY CYCLE = %. k.5 μf R B 5.1 k in 1N914 R C out C, CAPACITANCE (pf) C ibo C obo alues Shown are for I 1 ma Figure 6. Switching Time Test Circuit R, REERSE OLTAGE (OLTS) Figure 7. Capacitances t, TIME (ns) I C /I B = 1 t CC = 1 t BE(off) = CC = 1 t CC = t, TIME (ns) I C /I B = 1 t CC = t CC = 1 t CC = Figure 8. Turn On Time Figure 9. Turn Off Time 4

5 PACKAGE DIMENSIONS TO 9 (TO 6AA) CASE 9 11 ISSUE AL A B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, CONTROLLING DIMENSION: INCH. R. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. P 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. L SEATING INCHES MILLIMETERS PLANE K DIM MIN MAX MIN MAX A B C X X D D G G H H J J K. 1. L. 6.5 C N N P..54 SECTION X X R N STYLE 1: PIN 1. EMITTER. BASE. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 516, Denver, Colorado 817 USA Phone: or Toll Free USA/Canada Fax: or Toll Free USA/Canada orderlit@onsemi.com N. American Technical Support: Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: Japan Customer Focus Center Phone: ON Semiconductor Website: Order Literature: For additional information, please contact your local Sales Representative MPSL51/D