MCR70xA Series. Thyristors. Surface Mount 100V -600V > MCR70xA Series G K. Description
|
|
|
- Allan Little
- 5 years ago
- Views:
Transcription
1 MCR70x Series Pb Description PNPN Componants designed for high volume, low cost consumer applications such as temperature, light and speed control; process and remote control; and warning systems where reliability of operation is critical. Features Small Size Passivated Die Surface for Reliability and Uniformity Low Level Triggering and Holding Characteristics Recommend Electrical Replacement for C106 Surface Mount Package Case To Obtain DPK in Straight Lead ersion (Shipped in Sleeves): dd 1 Suffix to Componant Pin Out Number, i.e., MCR7061 UL Recognized compound meeting flammability rating -0. ESD Ratings: Human Body Model, 3B > 8000 Machine Model, C > Pb Free Packages are vailable Functional Diagram G K dditional Information Datasheet Resources Samples
2 Maximum Ratings ( = 25 C unless otherwise noted) Rating Symbol alue Unit Peak Repetitive Off State oltage (Note 1) (T C = 0 to +110 C, Sine Wave, 50 to 60 Hz, R GK = 1 k Ω) MCR703 MCR706 MCR708 DRM, RRM Peak Non-Repetitive Off State oltage (180º Conduction ngles; T C = 85ºC) MCR703 MCR706 MCR708 DSM On State RMS Current (180º Conduction ngles; T C = 90ºC) I T(RMS).0 verage On-State Current T C = 0 to +90ºC (180º Conduction ngles) T C = +100ºC I T() Non-Repetitive Surge Current (1/2 Cycle, Sine Wave 60 Hz, = 110 C) (1/2 Cycle, Sine Wave 1.5 ms, = 110 C) I TSM Circuit Fusing Consideration (t = 8.3 ms) I 2 t 2.6 ²sec Forward Peak Gate Power (Pulse Width µsec, T C = 90 C) I GM 0.5 W Forward Peak Gate Current (Pulse Width µsec, T C = 90 C) P GM 0.2 Forward verage Gate Power (t = 8.3 ms, TC = 90ºC) P G() 0.1 W Operating Junction Temperature Range -0 to +110 C Storage Temperature Range T stg -0 to +150 C Stresses exceeding Maximum Ratings may damage the Componant. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect Componant reliability. 1. DRM and RRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the Componants are exceeded. Thermal Characteristics* Rating Symbol alue Unit Thermal Resistance, Junction to Case R ƟJC 3.0 C/W Thermal Resistance, Junction to mbient (Note 2) R ƟJ 80 Maximum Lead Temperature for Soldering Purposes 1/8" from Case for 10 Seconds T L 260 C 2. Case when surface mounted on minimum pad sizes recommended.
3 Electrical Characteristics - OFF ( = 25 C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Peak Repetitive Forward or Reverse Blocking Current ( K = Rated DRM or RRM, R GK = 1 k Ω) = 25 C I DRM, I RRM = 110 C µ Electrical Characteristics - ON ( = 25 C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Peak Forward "On" oltage (I TM = 8.2 Peak, Pulse Width = 1 to 2 ms, 2% Duty Cycle) TM 2.2 Gate Trigger Current (Continuous dc) (Note 3) ( K = 12 ; R L = 2 Ω) = 25 C I GT _ = 0 C 300 µ Gate Trigger oltage (Continuous dc) (Note 3) ( K = 12 ; R L = 2 Ω) = 25 C GT 0.8 = 0 C Gate Non-Trigger oltage (Note 3) ( K = 12 dc; R L = 100 Ω, T C =110º) GD 0.2 Holding Current ( K = 12 dc, R GK = 1 k Ω) T C = 25ºC (Initiating Current = 20 m) T C = 0ºC I H _ m Peak Reverse Gate Blocking oltage (I GR = 10 µ) RGM Peak Reverse Gate Blocking Current ( GR = 10 ) I RGM 1.2 µ Total Turn-On Time (Source oltage = 12, RS = 6 kq) (I TM = 8.2, I GT = 2 m, Rated DRM ) (Rise Time = 20 ns, Pulse Width = 10 µs) t gt _ 2.0 _ µs Dynamic Characteristics* Characteristic Symbol Min Typ Max Unit Critical Rate of Rise of Off State oltage ( D = Rated DRM, R GK = 1 k Ω, Exponential Waveform, Gate Open, T c = 110ºC) Repetitive Critical Rate of Rise of On State Current (Cf = 60 Hz, I PK = 30, PW = 100 µs, dig/dt = 1 /µs) dv/dt 10 /µs di/dt 100 /µs 3. RGK current not included in measurement.
4 oltage Current Characteristic of SCR Symbol DRM Parameter Peak Repetitive Forward Off State oltage +Current node + TM I DRM Peak Forward Blocking Current on state RRM Peak Repetitive Reverse Off State oltage I RRM at RRM I H I RRM TM I H Peak Reverse Blocking Current Maximum On State oltage Holding Current Reverse Blocking Region (off state) Reverse valanche Region node +oltage I DRM at DRM Forward Blocking Region (off state) Figure 1. RMS Current Derating Figure 2. On State Power Dissipation Conduction ngle Conduction ngle Figure 3. On State Characteristics Figure. Transient Thermal Response r (t), TRNSIEN T RESIST NCE (NORMLIZED) Z JC(t) = R JC(t) r(t) ,000 t, TIME (ms)
5 Figure 5. Typical Gate Trigger Current vs Junction Temperature Figure 6. Typical Gate Trigger oltage vs Junction Temperature 35 I GT, GTE TRIGGER CURRENT ( ) GT, GTE TRIGGER OLTGE (OLTS) , JUNCTION TEMPER TURE ( C), JUNCTION TEMPER TURE ( C) Figure 7. Typical Holding Current vs Junction Temperature Figure 8. Typical Latching Current vs Junction Temperature I H, HOLDING CURRENT (m) I, LTCHING CURRENT (m) L , JUNCTION TEMPER TURE ( C), JUNCTION TEMPER TURE ( C)
6 Dimensions Soldering Footprint DPK CSE 01 ISSUE B C T SETING PLNE R E S 12 3 K U Z SCLE 3:1 mm inches F L J H D 2 PL G 0.13 (0.005) M T Dim Inches Millimeters Min Max Min Max b b b c c D E e BSC 2.29 BSC H L L REF 2.7 REF L BSC 0.51 BSC L L Z DIMENSIONING ND TOLERNCING PER NSI Y1.5M, CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES ZONE WHERE LL BODY ND LED IRREGULRITIES RE LLOWED.
7 Dimensions Part Marking System DPK 3 CSE 369D 01 ISSUE B DPK CSE STYLE 5 YWW CR 70xG S B R 12 3 C E Z DPK 3 CSE 369D STYLE 5 YWW CR 70xG T SETING PLNE K Y = Year WW = Work Week 70x = Componant Code x = 3, 6 or 8 G = Pb-Free Package F G D 3 PL J 0.13 (0.005) M T H Pin ssignment 1 Gate 2 node Dim Inches Millimeters Min Max Min Max 3 Cathode node B C D E F G BSC 2.29 BSC H J K R S Z DIMENSIONING ND TOLERNCING PER NSI Y1.5M, CONTROLLING DIMENSION: INCH. Ordering Information Componant Package Shipping MCR703T MCR703TG MCR706T MCR706TG MCR708 MCR708G MCR7081 MCR7081G DPK DPK-3 369D 369D 2500 Tape & Reel 75 Units/ Rail MCR708T MCR708TG DPK 2500 Tape & Reel Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at:
MCR703A Series. Thyristors. Surface Mount 100V -600V > MCR703A Series G K. Description
MCR703 Series Pb Description PNPN devices designed for high volume, low cost consumer applications such as temperature, light and speed control; process and remote control; and warning systems where reliability
MCR106-6, MCR Thyristors. Surface Mount 400V - 600V > MCR106-6, MCR106-8 TO 225AA CASE 77 STYLE 2 G K. Description
MCR106-6, MCR106-8 Pb Description PNPN devices designed for high volume consumer applications such as temperature, light and speed control; process and remote control, and warning systems where reliability
MCR8DSM, MCR8DSN. Thyristors. Surface Mount 600V - 800V > MCR8DSM, MCR8DSN G K. Description
MCR8DSM, MCR8DSN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size
MCR12DSM, MCR12DSN. Thyristors. Surface Mount 100V -600V > MCR12DSM, MCR12DSN G K. Description
MCR12DSM, MCR12DSN Thyristors Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control; CDI (Capacitive
MCR8DCM, MCR8DCN. Thyristors. Surface Mount 600V - 800V > MCR8DCM, MCR8DCN G K. Description
MCR8DCM, MCR8DCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size
MC4DCM, MAC4DCN. Thyristors. Surface Mount 600V - 800V > MC4DCM, MAC4DCN. Description
MCDCM, MACDCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size Surface
MCR12DCM, MCR12DCN. Thyristors. Surface Mount 400V - 800V > MCR12DCM, MCR12DCN G K. Description
MCR12DCM, MCR12DCN Pb Description This thyristor is designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon
MCR25DG, MCR25MG, MCR25NG
MCR25DG, MCR25MG, MCR25NG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled
MCR8SDG, MCR8SMG, MCR8SNG
MCR8SDG, MCR8SMG, MCR8SNG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled
MCR8NG. Thyristors. Surface Mount 600V - 800V > MCR8NG. Description
Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled devices are needed.
MCR218-2G, MCR218-4G, MCR218-6G
MCR218-2G, MCR218-4G, MCR218-6G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled,
MARKING DIAGRAMS MAXIMUM RATINGS
Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light
BTB08-600BW3G, BTB08-800BW3G
BTB08-600BW3G, BTB08-800BW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to
C122F1G. Thyristors. Surface Mount 50V > C122F1G. Description
Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled, solid state devices
MAC12D, MAC12M, MAC12N
MAC12D, MAC12M, MAC12N Pb Description Designed for high performance full wave ac control applications where high noise immunity and commutating di/dt are required. Features Blocking Voltage to 800 Volts
C106 Series. Thyristors. Surface Mount > V > C106 Series TO 225AA CASE 77 STYLE 2. Description
C106 Series Pb Description Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability
MCR69-2, MCR69-3. Thyristors. Surface Mount V > MCR69-2, MCR69-3. Description. Designed for overvoltage protection in crowbar circuits.
1 2 3 Thyristors MCR69-2, MCR69-3 Pb Description Designed for overvoltage protection in crowbar circuits. Features Glass-Passivated Junctions for Greater Parameter Stability and Reliability Center-Gate
BTA16-600BW3G, BTA16-800BW3G,
BTA6-600BW3G, BTA6-800BW3G, Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to
BTB16-600BW3G, BTB16-700BW3G, BTB16-600BW3G
BTB16-600BW3G, BTB16-700BW3G, BTB16-600BW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking
MCR12DG, MCR12MG, MCR12NG
MCR12DG, MCR12MG, MCR12NG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,
MAC12HCDG, MAC12HCMG, MAC12HCNG
MAC2HCDG, MAC2HCMG, MAC2HCNG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full wave, silicon gate controlled
2N5060 Series Preferred Device. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors
Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors nnular PNPN devices designed for high volume consumer applications such as relay and lamp drivers, small motor
MAC8DG, MAC8MG, MAC8NG
MAC8DG, MAC8MG, MAC8NG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,
BTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description
BTA08-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage to 800 On-State
2N6400. Thyristors. Surface Mount V > 2N6400. Description
2N6400 Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled, solid state devices
BTA25-600CW3G, BTA25-800CW3G
BTA25-600CW3G, BTA25-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage
BTA30H-600CW3G, BTA30H-800CW3G
BTA30H-600CW3G, BTA30H-800CW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage
MAC08BT1, MAC08MT1. Thyristors. Surface Mount 200V - 600V > MAC08BT1, MAC08MT1. Description
MAC08BT1, MAC08 Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Sensitive
2N6394. Thyristors. Surface Mount V > 2N6394. Description
2N6394 Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies. Features Glass Passivated Junctions for Greater Parameter Uniformity
MCR08B, MCR08M. Thyristors. Surface Mount 600V - 800V > MCR08B, MCR08M G K. Description
MCR8B, MCR8M Pb Description PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection
2N6504 Series. Thyristors. Surface Mount V > 2N6504 Series. Description
2N6504 Series Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Glass Passivated Junctions for
MAC16DG, MAC16MG, MAC16NG
MAC6DG, MAC6MG, MAC6NG Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking Voltage to 800
MAC210A8, MAC210A10. Thyristors. Surface Mount 400V - 800V > MAC210A8, MAC210A10. Description
MAC210A8, MAC210A10 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full wave silicon gate
MAC228A. Thyristors. Surface Mount 400V - 800V > MAC228A. Description
MAC228A Pb Description Designed primarily for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching
T2322B. Thyristors Surface Mount 200V > T2322B TO 225AA CASE 77 STYLE 2. Description
T2322B Pb Description Designed primarily for ac power switching. The gate sensitivity of these triacs permits the use of economical transistorized or integrated circuit control circuits, and it enhances
2N5060 Series. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors SILICON CONTROLLED RECTIFIERS 0.
Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors nnular PNPN devices designed for high volume consumer applications such as relay and lamp drivers, small motor
MARKING DIAGRAMS MAXIMUM RATINGS
Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light
MCR72-3, MCR72-6, MCR72-8. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 8 AMPERES RMS 100 thru 600 VOLTS
MCR72-3, MCR72-6, MCR72-8 Sensitive ate Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed for industrial and consumer applications such as temperature, light and speed control; process
MCR8DSM, MCR8DSN. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 8 AMPERES RMS VOLTS
Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control;
C106 Series. Sensitive Gate Silicon Controlled Rectifiers
Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and
2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS
Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.
2N6344. Thyristors. Surface Mount V > 2N6344. Description
2N6344 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled
2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS
Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.
MCR68 2. Silicon Controlled Rectifiers Reverse Blocking Thyristors. SCRs 12 AMPERES RMS 50 VOLTS
MCR682 Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed for overvoltage protection in crowbar circuits. Features lass-passivated Junctions for reater Parameter Stability and Reliability
MCR106-6, MCR Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 4 AMPERES RMS 400 thru 600 VOLTS
MCR106-6, MCR106-8 Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for high volume consumer applications such as temperature, light and speed
2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS
Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.
BTA16-600CW3G, BTA16-800CW3G. Triacs Silicon Bidirectional Thyristors. TRIACS 16 AMPERES RMS 600 thru 800 VOLTS
BTA6-600CW3G, BTA6-800CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance fullwave ac control applications where high noise immunity and high commutating di/dt are required. Features
MAC4DCM, MAC4DCN. Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 AMPERES RMS VOLTS
Preferred Device Triacs Silicon Bidirectional Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control.
Features. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
MAC4DSM, MAC4DSN. Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 AMPERES RMS VOLTS
Triacs Preferred Device Silicon Bidirectional Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control.
MCR100 Series Preferred Device. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 0.8 A RMS 100 thru 600 V
MCR0 Series Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers,
Silicon Controlled Rectifiers
MCR692, MCR693 Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed for overvoltage protection in crowbar circuits. Features Glass-Passivated Junctions for Greater Parameter Stability and
UNISONIC TECHNOLOGIES CO., LTD
MCR00 UNISONIC TECHNOLOGIES CO., LTD SENSITIVE GATE SILICON CONTROLLED RECTIFIERS REVERSE BLOCKING THYRISTORS 3 2 SOT-23 SOT-223 DEIPTION PNPN devices designed for high volume, line-powered consumer applications
Thyristors Surface Mount 120V - 240V > MKP1V120 Series. Description. Features. Strobes and Flashers. Ignitors. High Voltage Regulators
MKP1V120 Series Pb Description Bidirectional devices designed for direct interface with the ac power line. Upon reaching the breakover voltage in each direction, the device switches from a blocking state
Description. Features. Strobes and Flashers. Ignitors. High Voltage Regulators. Pulse Generators. Functional Diagram. Additional Information
MKP3V120, MKP3V240 Pb Description Bidirectional devices designed for direct interface with the ac power line. Upon reaching the breakover voltage in each direction, the device switches from a blocking
2N6071A/B Series. Thyristors. Surface Mount 200V-600W > 2N6071A/B Series. Description
2N6071A/B Series Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate
BTA08-800CW3G. Triacs. Silicon Bidirectional Thyristors TRIACS 8 AMPERES RMS 800 VOLTS
BTA8-8CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage
C106 Series. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 4 A RMS, Volts
C6 Series Preferred Devices Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Glassivated PNPN devices designed for high volume consumer applications such as temperature, light,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C6 Series Preferred Devices Sensitive Gate Silicon Controlled Rectifiers
2N6344A, 2N6348A, 2N6349A
2N6344A, 2N6348A, 2N6349A Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon
BTB16-600CW3G, BTB16-800CW3G. Triacs Silicon Bidirectional Thyristors. TRIACS 16 AMPERES RMS 600 thru 800 VOLTS
BTB-CW3G, BTB-8CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking
Symbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6V I T(RMS) = 4 A I TSM = 4 A I GT = 5mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 4A) Gate Trigger Current : 5mA High commutation
BTA25-600CW3G, BTA25-800CW3G. Triacs Silicon Bidirectional Thyristors. TRIACS 25 AMPERES RMS 600 thru 800 VOLTS
BTA-6CW3G, BTA-8CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features
R L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
BTA12-600C4G, BTA12-800C4G. Triacs Silicon Bidirectional Thyristors. TRIACS 12 AMPERES RMS 600 thru 800 VOLTS
BTA12-6C4G, BTA12-8C4G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features
MAC4DCM, MAC4DCN. Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 AMPERES RMS VOLTS
Preferred Device Triacs Silicon Bidirectional Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control.
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD SENSITIVE GATE SILICON CONTROLLED RECTIFIERS REVERSE BLOCKING THYRISTORS SOT-89 3 2 SOT-23 DEIPTION PNPN devices designed for high volume, line-powered consumer applications
BTB16-600BW3G, BTB16-700BW3G, BTB16-800BW3G. Triacs. Silicon Bidirectional Thyristors. TRIACS 16 AMPERES RMS 600 thru 800 VOLTS
BTB-BW3G, BTB-7BW3G, BTB-8BW3G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required.
BTA25H-600CW3G, BTA25H-800CW3G. Triacs Silicon Bidirectional Thyristors. TRIACS 25 AMPERES RMS 600 thru 800 VOLTS
BTAH-600CW3G, BTAH-800CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features
BTA16-600CW3G, BTA16-800CW3G. Triacs Silicon Bidirectional Thyristors. TRIACS 16 AMPERES RMS 600 thru 800 VOLTS
BTA6-600CW3G, BTA6-800CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance fullwave ac control applications where high noise immunity and high commutating di/dt are required. Features
MCR8N. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 8 AMPERES RMS 600 thru 800 VOLTS
Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever
Teccor brand Thyristors Silicon Controlled Rectifiers
Sx02xS EV Series Amp Sensitive SCR Description New Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR s junctions are
Symbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6 V I T(RMS) = 5 A I TSM = 6 A I GT = 35mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 5A) Gate Trigger Current : 35mA High commutation
2N6400 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 16 AMPERES RMS 50 thru 800 VOLTS
Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever halfwave silicon
1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS
Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.
1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description
1.5SMC6.8AT3G Pb Description The 1.5SMC6.8AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
P6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
Description. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Schematic Symbol. Samples G
Sxx4xSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current
2N6344. Silicon Bidirectional Thyristors. TRIACS 8 AMPERES RMS 600 thru 800 VOLTS
Preferred Device Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever
Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 75 C 0.8 A I T(AV) Average on-state current T C
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
MCR22-6, MCR22-8 Preferred Device. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 1.5 AMPERES RMS 400 thru 600 VOLTS
MCR22-6, MCR22-8 referred evice Sensitive ate Silicon Controlled Rectifiers Reverse Blocking Thyristors esigned and tested for repetitive peak operation required for C ignition, fuel ignitors, flash circuits,
MAC15 Series. Triacs. Silicon Bidirectional Thyristors. TRIACS 15 AMPERES RMS 400 thru 800 VOLTS
MAC5 Series Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave ac control applications, such as solidstate relays, motor controls, heating controls and power supplies; or wherever
TN B. Standard 15 A SCRs. Description. Features. Application. Benefits
Standard 15 A SCRs Description Datasheet - production data The TN1515-600B is a 15 A thyristor SCR housed in DPAK package. It fits any high voltage application that requires a high power density and compact
(1 A to 70 A) Features. Compak SCR
Selected Packages* File #E71639 U.L. RECONIZED TO-263 D 2 Pak TO-92 *TO-218 TO-252 D-Pak TO-22 *TO-218X 3-lead Compak *TO-22 TO-251 V-Pak (1 to 7 ) E6 eneral Description The Teccor line of thyristor SCR
Thyristors 8 Amp Sensitive & Standard SCRs. Sxx08xSx & Sxx08x Series. Description
Sxx08xSx & Sxx08x Series RoHS Description This Sxx08x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
: PNPN DB3 : MCRB25D MCRB25M MCRB25N MCRB25H. Pin Polarity Circuit Diagram TO-220F, TO-220AB, TO-263 (D 2 PAK)
Designed primarily for half wave ac control applications, such asmotor controls, heating controls, and power supplies; or whereverhalf wave, silicon gate controlled devices are needed. Blocking Voltage
NGB8207BN - 20 A, 365 V, N-Channel Ignition IGBT, D 2 PAK
NGB8207BN - 20 A, 365, N-Channel Ignition IGBT, D 2 PAK Pb Description This Logic Level Insulated Gate Bipolar Transistor (IGBT) features monolithic circuitry integrating ESD and Over oltage clamped protection
Teccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs
LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
Value Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C)
MAIN FEATURES: DIODE / SCR MODULE Symbol Value Unit I T(RMS) 50-70-85 A V DRM /V RRM 800 and 1200 V I GT 50 and 100 ma DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge
MAC3030 8G. Triacs. Silicon Bidirectional Thyristors TRIACS 8.0 AMPERES RMS 250 VOLTS
Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever fullwave silicon
Teccor brand Thyristors 16 Amp Standard SCR V DRM. Symbol Parameter Test Conditions Value Unit V DSM
16 mp Standard SCR RoHS Description The Littelfuse SCR S8016x series are specifically designed for Electric Vehicle On-Board Charger (EVOBC) applications. This SCR C line input rectifier can handle Level
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C
Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
CR02AM-8. Thyristor. Low Power Use. Features. Outline. Applications. Maximum Ratings. REJ03G Rev.1.00 Mar
Thyristor Low Power Use REJG4- Rev.. Mar.8. Features I T (AV) :. A V DRM : 4 V I GT : µa Planar Passivation Type Completed Pb free product Outline RENESAS Package code: PRSSDE-A (Package name: TO-9()).
Teccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV)
HS4040xQx Series RoHS Description The HS4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse
MAC223A6, MAC223A8, MAC223A10. Triacs. Silicon Bidirectional Thyristors. TRIACS 25 AMPERES RMS 400 thru 800 VOLTS
MAC3A6, MAC3A8, MAC3A Triacs Preferred Device Silicon Bidirectional Thyristors Designed primarily for full-wave ac control applications such as lighting systems, heater controls, motor controls and power
Features. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J
L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
Teccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation
Teccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C
RoHS Description Excellent unidirectional switches for phase control and general switching applications such as heating, motor control controls, converters / rectifiers and capacitive discharge ignitions.
Thyristors 55 Amp Standard SCRs. Symbol Parameter Test Conditions Value Unit Repetitive Peak off-state/reverse Voltage 1600 V V DSM
RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at