Teccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)
|
|
- Hector Hodge
- 5 years ago
- Views:
Transcription
1 RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These fast turn-off time s offer high dv/dt and high di/dt characteristics required in higher frequency (>0 PPS) switching circuits. Features & Benefits Main Features RoHS compliant Glass passivated junctions Voltage capability up to 400 V Surge capability up to 520 A TO-220 and TO-263 packages Symbol Value Unit I T(RMS) 40 A RM /V RRM 400 V I GT 15 to 65 ma Applications Fast turn-off time s are ideal for multi phase voltage regulator circuits, DC/AC inverters, and higher frequency pulsing power supplies. Schematic Symbol A K G Absolute Maximum Ratings Symbol Parameter Test Conditions Value Unit I T(RMS) RMS on-state current T C = C 40 A I T(AV) Average on-state current T C = C 25.0 A I TSM Peak non-repetitive surge current single half cycle; f = 50Hz; (initial) = 25 C single half cycle; f = 60Hz; (initial) = 25 C I 2 t I 2 t Value for fusing t p = 8.3 ms 1122 A 2 s di/dt Critical rate of rise of on-state current f = 60Hz ; = 125 C 175 A/μs I GM Peak gate current = 125 C 3.5 A P G(AV) Average gate power dissipation = 125 C 0.8 W T stg Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C A 1
2 Electrical Characteristics ( = 25 C, unless otherwise specified) Symbol Test Conditions Sxx40xQ Sxx40xQ2 Sxx40xQ3 Unit I GT = 12V; R L = 30 Ω MAX MIN V GT MAX. 1.5 V I GT = 12V; R L = 30Ω; = -40 C MAX ma dv/dt = RM ; gate open; = C 650 MIN. = RM ; gate open; = 125 C 550 V GD = RM ; R L = 3.3 kω; = 125 C MIN. 0.2 V I H I T = 400mA (initial) MAX ma t q (1) MAX μs t gt I G = 2 x I GT ; PW = 15µs; I T = A TYP μs Note : (1) I T =0.5A; t p =50µs; dv/dt=5v/µs; di/dt=-30a/µs ma V/μs Static Characteristics Symbol Test Conditions S4040xQ S4040xQ2 Unit V TM I T = A; t p = 3μs MAX V I DRM / I RRM RM / V RRM = 25 C = C MAX. 0 = 125 C μa Thermal Resistances Symbol Parameter Value Unit R θ(j-c) Junction to case (AC) 0.6 C/W R θ(j-a) Junction to ambient 40 C/W 2
3 Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature Figure 2: Normalized DC Gate Trigger Voltage vs. Junction Temperature Ratio of I GT / I GT ( = 25 C) Ratio of V GT / V GT ( = 25 C) Junction Temperature ( ) - ( C) 125 Junction Temperature ( ) - ( C) Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: On-State Current vs. On-State Voltage (Typical) 2.5 = 25 C 2.0 Ratio of I H / I H ( = 25 C) Instantaneous On-state Current (i T ) Amps Junction Temperature ( ) -- ( C) Instantaneous On-state Voltage (v T ) Volts Figure 5: Power Dissipation (Typical) vs. RMS On-State Current Figure 6: Maximum Allowable Case Temperature vs. RMS On-State Current Average On-State Power Dissipation [P D(AV) ] - (Watts) RMS On-State Current [I T(RMS) ] - (Amps) Maximum Allowable Case Temperature (T C )- C CURRENT WAVEFORM: Sinusoidal 75 LOAD: Resistive or Inductive CONDUCTION ANGLE: RMS On-State Current [I T(RMS) ] - Amps 3
4 t W Teccor brand Thyristors Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current Figure 8: Maximum Allowable Ambient Temperature vs. RMS On-State Current Maximum Allowable Case Temperature (T C ) - C CURRENT WAVEFORM: Sinusoidal 85 LOAD: Resistive or Inductive CONDUCTION ANGLE: Average On-State Current [I T(AVE) ] - Amps Maximum Allowable Ambient Temperature (T A ) - C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 1 FREE AIR RATING RMS On-State Current [I T(RMS) ] - Amps Figure 9: Maximum Allowable Ambient Temperature vs. Average On-State Current Figure 10: Peak Capacitor Discharge Current 00 Maximum Allowable Ambient Temperature (Tc) - C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 1 FREE AIR RATING Peak Discharge Current (I TM ) - Amps 0 I TRM Average On-State Current [I T(AVE) ] - Amps Pulse Current Duration (t w ) - ms Figure 11: Peak Capacitor Discharge Current Derating Normalized Peak Current Case Temperature (T C ) - C 4
5 Temperature Teccor brand Thyristors Figure 12: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (I TSM ) Amps 0 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [I T(RMS) ]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value Surge Current Duration -- Full Cycles Soldering Parameters Reflow Condition - Temperature Min (T s(min) ) 150 C Pb Free assembly T P Ramp-up t P Pre Heat - Temperature Max (T s(max) ) 200 C - Time (min to max) (t s ) 60 1 secs Average ramp up rate (Liquidus Temp) (T L ) to peak 5 C/second max T L T S(max) T S(min) Preheat t L Ramp-down T S(max) to T L - Ramp-up Rate 5 C/second max t S - Temperature (T L ) (Liquidus) 217 C Reflow - Temperature (t L ) seconds Peak Temperature (T P ) /-5 C 25 time to peak temperature Time Time within 5 C of actual peak Temperature (t p ) seconds Ramp-down Rate 5 C/second max Time 25 C to peak Temperature (T P ) 8 minutes Max. Do not exceed 2 C 5
6 Physical Specifications Environmental Specifications Terminal Finish Body Material Lead Material Design Considerations % Matte Tin-plated UL recognized epoxy meeting flammability classification 94V-0 Copper Alloy Careful selection of the correct device for the application s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Test AC Blocking Temperature Cycling Temperature/ Humidity High Temp Storage Low-Temp Storage Resistance to Solder Heat Solderability Lead Bend Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC 125 C for 8 hours MIL-STD-750, M-1051, cycles; -40 C to +150 C; 15-min dwell-time EIA / JEDEC, JESD22-A101 8 hours; 320V - DC: 85 C; 85% rel humidity MIL-STD-750, M-1031, 8 hours; 150 C 8 hours; -40 C MIL-STD-750 Method 2031 ANSI/J-STD-002, category 3, Test A MIL-STD-750, M-2036 Cond E Dimensions TO-220AB (R-Package) Non-Isolated Mounting Tab Common with Center Lead E B C D A ANODE T C MEASURING POINT O P AREA (REF.) 0.17 IN Dimension Inches Millimeters Min Max Min Max A B C D E G F L H R NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F G H J CATHODE ANODE K J GATE N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). K L M N O P R
7 Teccor brand Thyristors Dimensions TO- 263 (N-package) D 2 -Pak Surface Mount B ANODE V T C MEASURING POINT C E AREA: 0.11 in 2 Dimension Inches Millimeters Min Max Min Max A A B S C W U D CATHODE GATE K J E G D F H F G H J K S V U W Part Numbering System S R Q 56 Part Marking System TO-220 AB - (R Package) TO-263 (N Package) DEVICE TYPE S: VOLTAGE RATING 40: 400V CURRENT RATING 40: 40A Lead Form Dimensions xx: Lead Form Option TURN-OFF TIME [blank]: 15μs 2: 12μs 3: 5μs S4040RQ YM PACKAGE TYPE R: TO-220 (Non-isolated) N: TO-263 (D2 - Pak) LOW TURN OFF TIME TYPE Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code 7
8 Product Selector Voltage Part Number 400V Gate Sensitivity Type Package S4040RQ X Standard TO-220AB S4040NQ X Standard TO-263 S4040RQ2 X Standard TO-220AB S4040NQ2 X Standard TO-263 S4040RQ3 X Standard TO-220AB S4040NQ3 X Standard TO-263 Packing Options Part Number Marking Weight Packing Mode Base Quantity S4040RQTP S4040RQ 2.2g Tube 500 (50 per tube) S4040RQ2TP S4040RQ2 2.2g Tube 500 (50 per tube) S4040RQ3TP S4040RQ3 2.2g Tube 500 (50 per tube) S4040NQRP S4040NQ 1.6g Embossed Carrier 500 S4040NQ2RP S4040NQ2 1.6g Embossed Carrier 500 S4040NQ3RP S4040NQ3 1.6g Embossed Carrier 500 Reel Pack (RP) for TO-263 Embossed Carrier Specifications Meets all EIA Standards 0.63 (16.0) (4.0) DIA (1.5) Gate Cathode (24.0) (21.0) * * Cover tape Anode (13.0) Arbor Hole Dia (330.0) Dimensions are in inches (and millimeters) (25.7) Direction of Feed 8
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C
Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationTeccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C
RoHS Description Excellent unidirectional switches for phase control and general switching applications such as heating, motor control controls, converters / rectifiers and capacitive discharge ignitions.
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet
Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less
More informationThyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q6012xH1LED Series RoHS Description Q6012LH1LED series is designed to meet low load current characteristics typical in LED lighting applications. By keeping holding current at 8mA maximum, this Triac series
More informationThyristors 4 Amp High Temperature Sensitive SCRs. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 130 C 4 A I T(AV)
RoHS Description This SJxx4x high temperature SCR series is ideal for uni-directional switch applications such as phase control in heating, motor speed controls, converters/rectifiers and capacitive discharge
More informationTeccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV)
HS4040xQx Series RoHS Description The HS4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse
More informationTeccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs
QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense
More informationTeccor brand Thyristors Silicon Controlled Rectifiers
Sx02xS EV Series Amp Sensitive SCR Description New Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR s junctions are
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC
More informationLJxx08xx & QJxx08xHx Series
RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationLJxx08xx & QJxx08xHx Series
LJxx8xx & QJxx8xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature
More informationFeatures. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J
L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationThyristors 30 / 35 Amp Alternistor (High Commutation) Triacs
Qxx30xHx & Qxx35xHx Series RoHS Description The 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs
LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationTeccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation
More informationTeccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description
Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationTeccor brand Thyristors 16 Amp Standard SCR V DRM. Symbol Parameter Test Conditions Value Unit V DSM
16 mp Standard SCR RoHS Description The Littelfuse SCR S8016x series are specifically designed for Electric Vehicle On-Board Charger (EVOBC) applications. This SCR C line input rectifier can handle Level
More informationThyristors 8 Amp Sensitive & Standard SCRs. Sxx08xSx & Sxx08x Series. Description
Sxx08xSx & Sxx08x Series RoHS Description This Sxx08x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
More informationSymbol Parameter Test Conditions Value Unit RMS on-state current T C = 75 C 0.8 A I T(AV) Average on-state current T C
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Schematic Symbol. Samples G
Sxx4xSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationFeatures. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
More informationThyristors 25 Amp Standard & Alternistor (High Commutation) Triacs. Qxx25xx & Qxx25xHx Series. Description
Qxx25xx & Qxx25xHx Series RoHS escription This 25 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationTeccor brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx08xx & Qxx08xx & Qxx08xHx Series RoHS Description 8 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTeccor brand Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx06xx & Qxx06xx & Qxx06xHx Series RoHS Description 6 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationDK208D Rectifier Diode
DK208D Rectifier Diode RoHS Description This DK208D 8, 1200V rated standard recovery rectifier diode in a compact TO-252 surface mount package is ideal as a bypass diode or anti-parallel diode for active
More informationTeccor brand Thyristors High Energy Unidirectional SIDACs
K2xx0yHU Series RoHS Description The new K2xx0yHU is a higher energy SIDC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationKxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationFeatures. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL
Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp
More informationThyristors 55 Amp Standard SCRs. Symbol Parameter Test Conditions Value Unit Repetitive Peak off-state/reverse Voltage 1600 V V DSM
RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at
More informationTeccor brand Thyristors Standard Bidirectional DIAC Trigger
Description The HTM, HT, and ST series of bilateral trigger DIACs offer a range of voltage characteristics from 27V to 70V. A DIAC semiconductor is a full-wave or bidirectional Thyristor. It is triggered
More informationKxxx0yU SIDAC Series. Thyristors Standard Unidirectional SIDACs. RoHS. Description
Standard Unidirectional SIDCs xxx0yu SIDC Series RoHS Description The SIDC is a silicon unilateral voltage triggered switch. Upon application of a voltage exceeding the SIDC breakover voltage point, the
More informationTeccor brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs
escription 25 mp bi-directional solid state switch series is designed for switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationSensitive Triacs. ( Amps) Features
Selected Packages* U.L. RECOGNIZED File #E71639 TO - 92 THERMOTAB TO-22AB TO-22AB G Sensitive Triacs (.8 8. ) 11 General Description Teccor's line of sensitive gate triacs includes devices with current
More informationMCR69-2, MCR69-3. Thyristors. Surface Mount V > MCR69-2, MCR69-3. Description. Designed for overvoltage protection in crowbar circuits.
1 2 3 Thyristors MCR69-2, MCR69-3 Pb Description Designed for overvoltage protection in crowbar circuits. Features Glass-Passivated Junctions for Greater Parameter Stability and Reliability Center-Gate
More informationTeccor brand Protection Thyristors Surface Mount
Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak
More informationMCR218-2G, MCR218-4G, MCR218-6G
MCR218-2G, MCR218-4G, MCR218-6G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled,
More informationTriacs. ( Amps) Features
Selected Packages* U.L. RECOGNIZED File #E71639 THERMOTAB TO-22AB TO - 92 TO-22AB G Triacs (.8 25 ) 2 General Description These gated triacs from Teccor Electronics are part of a broad line of bidirectional
More informationPLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
More informationValue Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C)
MAIN FEATURES: DIODE / SCR MODULE Symbol Value Unit I T(RMS) 50-70-85 A V DRM /V RRM 800 and 1200 V I GT 50 and 100 ma DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge
More informationPLEDxUSWxA Series - Unidirectional, White Body
PLEDxUSWxA Series - Unidirectional, White Body RoHS e3 Description Agency Approvals Agency Agency File Number E133083 PLEDxUSWxA open LED protectors provide a switching electronic shunt path when an LED
More informationMAC08BT1, MAC08MT1. Thyristors. Surface Mount 200V - 600V > MAC08BT1, MAC08MT1. Description
MAC08BT1, MAC08 Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Sensitive
More informationPLEDxUSW Series, Unidirectional, White DO-214AA
PLEDxUSW Unidirectional Series PLEDxUSW Series, Unidirectional, White DO-214AA RoHS Description Agency Approvals Agency Agency File Number E133083 The PLEDxUSW open LED protectors provide an electronic
More information(1 A to 70 A) Features. Compak SCR
Selected Packages* File #E71639 U.L. RECONIZED TO-263 D 2 Pak TO-92 *TO-218 TO-252 D-Pak TO-22 *TO-218X 3-lead Compak *TO-22 TO-251 V-Pak (1 to 7 ) E6 eneral Description The Teccor line of thyristor SCR
More informationPLED Unidirectional Series (PLEDxUx)
(PLEDxUx) PLED Open LED Protectors Agency Approvals Agency Agency File Number E133083 Description The (PLEDxUx Series) open LED protectors provide an electronic switching shunt path around a single LED
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationTriacs. (0.8 A to 35 A) Features. Compak Package. General Description
* Selected Packages U.L. RECONIZED File #E71639 E2 TO-92 TO-22 *TO-22 3-lead Compak TO-263 D 2 Pak TO-252 D-Pak *TO-3 Fastpak TO-251 V-Pak (.8 A to 35 A) RoHS E2 eneral Description These gated triacs from
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTN B. Standard 15 A SCRs. Description. Features. Application. Benefits
Standard 15 A SCRs Description Datasheet - production data The TN1515-600B is a 15 A thyristor SCR housed in DPAK package. It fits any high voltage application that requires a high power density and compact
More informationZener Diode Surface Mount - 1W - SMF47xxA LF RoHS
SMF47xxA Description SMF47xxA Series Zener Diodes are excellent voltage stabilization devices. The Series is designed specifically for Voltage stabilization Voltage regulation, and so on. Zener Diode LF
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTN1610H-6T. High temperature 16 A SCRs. Description. Features. Applications
High temperature 16 A SCRs Datasheet production data Description Thanks to a junction temperature T j up to 150 C and a non-isolated TO-220 package, the TN1610H-6T offers high thermal performance operation
More informationMCR8NG. Thyristors. Surface Mount 600V - 800V > MCR8NG. Description
Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled devices are needed.
More informationMCR12DSM, MCR12DSN. Thyristors. Surface Mount 100V -600V > MCR12DSM, MCR12DSN G K. Description
MCR12DSM, MCR12DSN Thyristors Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control; CDI (Capacitive
More informationBTA40 and BTA/BTB41 Series
STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationMCR8DSM, MCR8DSN. Thyristors. Surface Mount 600V - 800V > MCR8DSM, MCR8DSN G K. Description
MCR8DSM, MCR8DSN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size
More informationMCR08B, MCR08M. Thyristors. Surface Mount 600V - 800V > MCR08B, MCR08M G K. Description
MCR8B, MCR8M Pb Description PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection
More informationMCR12DCM, MCR12DCN. Thyristors. Surface Mount 400V - 800V > MCR12DCM, MCR12DCN G K. Description
MCR12DCM, MCR12DCN Pb Description This thyristor is designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon
More informationSymbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6V I T(RMS) = 4 A I TSM = 4 A I GT = 5mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 4A) Gate Trigger Current : 5mA High commutation
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationMCR12DG, MCR12MG, MCR12NG
MCR12DG, MCR12MG, MCR12NG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,
More informationMCR8SDG, MCR8SMG, MCR8SNG
MCR8SDG, MCR8SMG, MCR8SNG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled
More informationC122F1G. Thyristors. Surface Mount 50V > C122F1G. Description
Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled, solid state devices
More informationMAC228A. Thyristors. Surface Mount 400V - 800V > MAC228A. Description
MAC228A Pb Description Designed primarily for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Balanced Series - MS-013. Description
SIDCtor Balanced Series - MS- RoHS Pb e Description The SIDCtor Balanced Series MS- are designed to protect baseband equipment from overvoltage transients. The patented Y configuration ensures balanced
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. MC Multiport Series - MS-013. Description
MC Multiport Series - MS-13 RoHS Pb e3 Description The MC Multiport Series MS-13 are low capacitance SIDCtor thyristors designed to protect broadband equipment from damaging overvoltage transients. The
More informationBTA A Snubberless Triacs. Features. Description. I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma
20 A Snubberless Triacs Datasheet production data Features I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma Description G A2 A1 The Triacs use high performance glass passivated
More informationT x V 25 A Snubberless Triac. Description. Features. Applications. Benefits
1200 V 25 A Snubberless Triac Description Datasheet production data Its 1200 V blocking voltage enables use in 3-phase industrial application. Its noise immunity and dynamic commutation makes it suitable
More information2N6400. Thyristors. Surface Mount V > 2N6400. Description
2N6400 Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled, solid state devices
More informationACST6. Overvoltage protected AC switch. Applications. Description. Features. Benefits
Overvoltage protected AC switch Datasheet - production data OUT TO-220AB ACST610-8T OUT Features COM G OUT COM D²PAK ACST610-8G TO-220FPAB ACST610-8FP Figure 1. Functional diagram G G OUT COM OUT I²PAK
More informationMAC12HCDG, MAC12HCMG, MAC12HCNG
MAC2HCDG, MAC2HCMG, MAC2HCNG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full wave, silicon gate controlled
More information2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS
Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.
More information6 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER EL301X, EL302X, EL305X Series
6 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER EL301X, EL302X, EL305X Series Schematic 1 6 2 5 Features: Peak breakdown voltage - 250V: EL301X - 400V: EL302X - 600V: EL305X High isolation voltage between
More informationSymbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6 V I T(RMS) = 5 A I TSM = 6 A I GT = 35mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 5A) Gate Trigger Current : 35mA High commutation
More informationT405Q A sensitivetriacs. Description. Features. Applications
4 A sensitivetriacs G A2 A1 Description Datasheet - production data Sensitive Triacs are intended in general purpose applications where high surge current capability is required. These Triacs feature a
More information2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS
Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.
More information2N6394. Thyristors. Surface Mount V > 2N6394. Description
2N6394 Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies. Features Glass Passivated Junctions for Greater Parameter Uniformity
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information2N6504 Series. Thyristors. Surface Mount V > 2N6504 Series. Description
2N6504 Series Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Glass Passivated Junctions for
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationLDR3 Outline Dimensions. Dimension Inches Millimeters
OUTLINE DRAWING Dual SCR Module 5 Amperes / 16-18 Volts Ordering Information: Select the complete eight-digit module part number from the table below. Example: LDR3165 is a 16V, 5 Ampere Dual SCR Isolated
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationMCR8DCM, MCR8DCN. Thyristors. Surface Mount 600V - 800V > MCR8DCM, MCR8DCN G K. Description
MCR8DCM, MCR8DCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size
More information6 PIN DIP ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER EL303X, EL304X, EL306X, EL308X Series
Schematic 1 6 2 5 Features: 3 Zero Crossing Circuit 4 Peak breakdown voltage - 250V: EL303X - 400V: EL304X - 600V: EL306X - 800V: EL308X High isolation voltage between input and output (Viso=5000 V rms
More informationT1235H, T1250H. High temperature 12 A Snubberless Triacs. Features. Applications. Description
High temperature 12 A Snubberless Triacs Features Medium current Triac 150 C max. T j turn-off commutation Low thermal resistance with clip bonding Very high 3 quadrant commutation capability G A1 Packages
More informationPINNING - TO220AB PIN CONFIGURATION SYMBOL
series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated thyristors in a plastic SYMBOL PARAMETER MAX. MAX. MAX. UNIT envelope, intended for use in applications requiring high - 4R 6R 8R bidirectional
More informationMCR25DG, MCR25MG, MCR25NG
MCR25DG, MCR25MG, MCR25NG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled
More informationC106 Series. Thyristors. Surface Mount > V > C106 Series TO 225AA CASE 77 STYLE 2. Description
C106 Series Pb Description Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information50RIA SERIES 50 A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2401 rev. A 07/00. Case Style TO-208AC (TO-65)
50RIA SERIES MEDIUM POWER THYRISTORS Stud Version Features High current rating Excellent dynamic characteristics dv/dt = 0V/µs option Superior surge capabilities Standard package Metric threads version
More informationT1610, T1635, T1650 BTA16, BTB16 Datasheet
T1610, T1635, T1650 BTA16, BTB16 Datasheet Snubberless, logic level and standard 16 A Triacs A2 Features Medium current Triac A2 G A1 Low thermal resistance with clip bonding Low thermal resistance insulation
More informationST300S SERIES 300A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25158 rev. B 01/94. case style TO-209AE (TO-118)
ST300S SERIES PHASE CONTROL THYRISTORS Stud Version Features Center amplifying gate Hermetic metal case with ceramic insulator International standard case TO-209AE (TO-118) Threaded studs UNF 3/4-16UNF2A
More information