Sensitive Triacs. ( Amps) Features

Size: px
Start display at page:

Download "Sensitive Triacs. ( Amps) Features"

Transcription

1 Selected Packages* U.L. RECOGNIZED File #E71639 TO - 92 THERMOTAB TO-22AB TO-22AB G Sensitive Triacs (.8 8. ) 11 General Description Teccor's line of sensitive gate triacs includes devices with current capabilities through 8 amperes. Voltage ranges are available from 2 to 6 volts. This line features devices with guaranteed gate control in the second and fourth quadrants as well as control in the commonly used first and third quadrants. Four-quadrant control devices require sensitive gate triacs. They lend themselves to be controlled by digital circuitry where positive-only or negative-only pulses must control AC current in both directions through the device. It should be noted that triacs with low values in the second and fourth quadrants will have lower dv/dt characteristics. The sensitive gate triac is a bidirectional AC switch and is gate controlled for either polarity of main terminal voltage. Its primary purpose is for AC switching and phase control applications such as motor speed controls, temperature modulation controls, and lighting controls. A wide range of package variations are available. The plastic TO- 92 and THERMOTAB configurations feature Teccor's electrically isolated construction where the case or mounting tab is internally isolated from the semiconductor chip and lead attachments. Nonisolated plastic TO-22 packages are available. Tape-and-reel capability and tube packing also are available. See Packing Options section of this catalog. All Teccor triacs have glass passivated junctions. This glassing process prevents migration of contaminants and ensures longterm device reliability with parameter stability. Variations of devices covered in this data sheet are available for custom design applications. Please consult the factory for more information. Features Electrically-isolated packages Glass-passivated junctions ensure long device reliability and parameter stability Voltage capability up to 6 Volts Surge capability up to 8 Teccor Electronics, Inc. 1-1 Sensitive Triacs (972)

2 Electrical Specifications Part No. I T(RMS) Isolated Non-Isolated V DRM I DRM V TM V GT DC Trigger Off-State DC RMS Repetitive in Specific Trigger Voltage Operating Quadrants Open V Blocking Voltage at D = 12VDC V Conduction Angle (1) L = 6Ω Rated Value (2) (5) Voltage D = 12VDC V DRM = Max R Max Rated L = 6Ω R RMS (3) (6) (1) (13) T C = 25 C of 36 (11) G G G m m (1) (4) Volts TO-92 THERMOTAB TO-22AB T C = T C = T C = T C = TO-22 Volts QI QII QIII QIV 25 C 11 C Volts 11 C 25 C MAX See Package Dimensions section for variations. MIN MAX MAX MAX MAX MIN MAX.8 Amp Amp L2X8E L4X8E L6X8E L2X8E L4X8E L6X8E L2X8E L4X8E L6X8E L2X8E L4X8E L6X8E L21E L41E L61E L21E L41E L61E L21E L41E L61E L21E L41E L61E L24L3 L24F L44L3 L44F L64L3 L64F L24L5 L24F L44L5 L44F L64L5 L64F L24L6 L24F L44L6 L44F L64L6 L64F L24L8 L24F L44L8 L44F L64L8 L64F L26L L46L L66L L26L L46L L66L L26L L46L L66L L28L L48L L68L L28L L48L L68L See General Notes and Electrical Specification Notes on page 1-4. Sensitive Triacs 1-2 Teccor Electronics, Inc. (972)

3 Sensitive Triacs I H M P GM P G(AV) I TSM dv/dt(c) dv/dt t gt I 2 t di/dt Holding Open Initial = 2mADC (1) (7) Trigger (12) Power Dissipation M (12) Average Power Dissipation One Cycle Surge (8) (1) Critical Rate-of- Rise of Commutation Voltage at Rated V DRM and I T(RMS) Commutating di/dt =.54 Rated I T(RMS) /ms Unenergized (1) (1) Critical Rate-of- Rise of Off-State Voltage at Rated V DRM Open (1) Volts/µSec Controlled Turn-On Time = 5mA.1µs Rise Time RMS Surge (Non- Repetitive) for Period of 8.3ms for Fusing Maximum Rate-of- Change of = 5mA With.1µs Rise Time m Watts Watts 6Hz 5Hz Volts/µSec T C = 1 C µsec 2 Sec /µsec MAX TYP TYP TYP See General Notes and Electrical Specification Notes on page 1-4. Teccor Electronics, Inc. 1-3 Sensitive Triacs (972)

4 Electrical Specifications General Notes All measurements are made with 6Hz resistive load and at an ambient temperature of +25 C unless otherwise specified. Operating temperature range (T J ) is -65 C to +11 C for TO-92 devices; -4 C to 11 C for all other devices. Storage temperature range (T S ) is -65 C to +15 C for TO-92 devices; -4 C to +15 C for TO-22 devices; and -4 C to +125 C for TO-22 devices. Lead solder temperature is a maximum of 23 C for 1 seconds maximum at a minimum of 1/16 (1.59mm) from case. The case temperature (T C ) is measured as shown on dimensional outline drawings. See Package Dimensions section of this catalog. Electrical Specification Notes (1) For either polarity of with reference to terminal. (2) For either polarity of gate voltage V GT with reference to terminal. (3) See definition of quadrants and gate characteristics. (4) See Figure 1.4 for i T vs v T. (5) See Figure 1.6 for V GT vs T C. (6) See Figure 1.7 for vs T C. (7) See Figure 1.5 for I H vs T C. (8) See Figure 1.9 for surge rating and specific duration. (9) See Figure 1.8 for t gt vs. (1) See Figures 1.2 and 1.3 for maximum allowable case temperature at maximum rated current. (11) See Figures 1.1, 1.2, and 1.3 for T A or T C vs I T (RMS). (12) Pulse width 1µs. (13) T C = T J for test conditions in off-state. Characteristics Teccor triacs may be turned on between gate and terminals in the following ways: With in-phase signals (using standard AC line) Quadrants I and III are used. By applying unipolar pulses (gate always positive or negative) with negative gate pulses Quadrants II and III are used and with positive gate pulses Quadrants I and IV are used. When maximum surge capability is required, pulses should be a minimum of one magnitude above rating with a steep rising waveform ( 1µsec rise time). (-) - (-) Definition of Quadrants Electrical Isolation Teccor s isolated triac packages will withstand a minimum high potential test of 25 VAC RMS from leads to mounting tab over the device's operating temperature range. See isolation table below for standard isolation ratings. ELECTRICAL ISOLATION FROM LEADS TO MOUNTING TAB TO-22AB VAC(RMS) THERMOTAB * 25 Standard * U.L. Recognized File #E71639 POSITIVE + - NEGATIVE (+) (+) + THERMAL RESISTANCE (STEADY STATE) JUNCTION TO MOUNTING TAB AND JUNCTION TO AMBIENT R θjc [R θja ] C/W (TYP) TYPE Plastic TO-92 TO-22AB TYPE 1 TO-22AB THERMOTAB TO-22AB TYPE 2.8 Amp 6 [135] Amp 5 [95] [45] 3.6 [5] 6. [7] Sensitive Triacs 1-4 Teccor Electronics, Inc. (972)

5 Sensitive Triacs Maximum Allowable Ambient Temperature (T A ) - C AMP TO-92 DEVICE CONDUCTION ANGLE: 36 FREE AIR RATING NO HEATSINK AMP TO-92 DEVICE TO-22 & TYPE 1 & 3 TO-22 DEVICE TYPE 2 & 4 TO-22 DEVICE RMS [I T(RMS) ] - Positive or Negative Instantaneous (i T ) T C = 25 C 6 & 8 AMP 4 AMP AMP.8 AMP Positive or Negative Instantaneous Voltage (v T ) - Volts Figure 1.1 Maximum Allowable Ambient Temperature vs Figure 1.4 vs Voltage (Typical) Maximum Allowable Case Temperature (T C ) C AMP TO-92 DEVICE CONDUCTION ANGLE: 36 CASE TEMPERATURE: Measured as shown on Dimensional Drawings AMP TO-92 DEVICE RMS [I T(RMS) ] I H I H (T C = 25 C) Ratio of INITIAL ON-STATE CURRENT = 2 ma (DC) Case Temperature (T C ) - C Figure 1.2 Maximum Allowable Case Temperature vs (.8 and Amp) Figure 1.5 Normalized DC Holding vs Case Temperature Maximum Allowable Case Temperature (T C ) - C AMP TYPE 1 & 3 TO-22 DEVICE & 4 AMP TO-22 (ISOLATED) 4 AMP TYPE 2 & 4 TO-22 DEVICE CONDUCTION ANGLE: 36 CASE TEMPERATURE: Measured as shown on Dimensional Drawings 6 AMP TO-22 (ISOLATED) 8 AMP TO-22 (ISOLATED) RMS [IT(RMS)] - V GT V GT (T C = 25 C) Ratio of Case Temperature (T C ) - C Figure 1.3 Maximum Allowable Case Temperature vs (4, 6, and 8 Amp) Figure 1.6 Normalized DC Trigger Voltage for All Quadrants vs Case Temperature Teccor Electronics, Inc. 1-5 Sensitive Triacs (972)

6 Electrical Specifications (T C = 25 C) Ratio of Case Temperature (T C ) - C Surge (Non-Repetitive) (I TSM ) SUPPLY FREQUENCY: 6 Hz Sinusoidal LOAD: Resistive RMS : [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Surge Duration - full cycles NOTES: 1) CONTROL MAY BE LOST DURING AND IMMEDIATELY FOLLOWING SURGE CURRENT INTERVAL 2) OVERLOAD MAY NOT BE REPEATED UNTIL JUNCTION TEMPERTURE HAS RETURNED TO STEADY-STATE RATED VALUE 8. AMP DEVICE 6. AMP DEVICE 4. AMP DEVICE AMP DEVICE.8 AMP DEVICE Figure 1.7 Normalized DC Trigger for All Quadrants vs Case Temperature Figure 1.9 Surge vs Surge Duration Turn-On Time (t gt ) - µsec TC = 25 C = 3 ma MAX = 5 ma MAX = 1 ma MAX = 2 ma MAX Average Power Dissipation [P D(AV) ] - Watts CONDUCTION ANGLE: 36.8 AMP 1 AMP RMS [I T(RMS) ] - Figure DC Trigger ( ) - ma Turn-On Time vs Trigger (Typical) Figure 1.1 Average Power Dissipation [P D(AV) ] - Watts Power Dissipation (Typ.) vs RMS (.8 and 1 Amp) CONDUCTION ANGLE: 36 4 AMP 6 & 8 AMP RMS [I T(RMS) ] - Figure 1.11 Power Dissipation (Typ.) vs RMS (4, 6, and 8 Amp) Sensitive Triacs 1-6 Teccor Electronics, Inc. (972)

Triacs. ( Amps) Features

Triacs. ( Amps) Features Selected Packages* U.L. RECOGNIZED File #E71639 THERMOTAB TO-22AB TO - 92 TO-22AB G Triacs (.8 25 ) 2 General Description These gated triacs from Teccor Electronics are part of a broad line of bidirectional

More information

Triacs. (0.8 A to 35 A) Features. Compak Package. General Description

Triacs. (0.8 A to 35 A) Features. Compak Package. General Description * Selected Packages U.L. RECONIZED File #E71639 E2 TO-92 TO-22 *TO-22 3-lead Compak TO-263 D 2 Pak TO-252 D-Pak *TO-3 Fastpak TO-251 V-Pak (.8 A to 35 A) RoHS E2 eneral Description These gated triacs from

More information

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. * Selected Packages U.L. RECONIZED File #E71639 E4 *TO-22 *TO-218X *TO-218

More information

Thyristors 12 Amp Alternistor (High Communitation) Triacs

Thyristors 12 Amp Alternistor (High Communitation) Triacs Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,

More information

(1 A to 70 A) Features. Compak SCR

(1 A to 70 A) Features. Compak SCR Selected Packages* File #E71639 U.L. RECONIZED TO-263 D 2 Pak TO-92 *TO-218 TO-252 D-Pak TO-22 *TO-218X 3-lead Compak *TO-22 TO-251 V-Pak (1 to 7 ) E6 eneral Description The Teccor line of thyristor SCR

More information

Symbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)

Symbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV) 3 Quadrants Standard TRIAC V DRM = 6V I T(RMS) = 4 A I TSM = 4 A I GT = 5mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 4A) Gate Trigger Current : 5mA High commutation

More information

Description. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature

Description. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature Q6012xH1LED Series RoHS Description Q6012LH1LED series is designed to meet low load current characteristics typical in LED lighting applications. By keeping holding current at 8mA maximum, this Triac series

More information

LJxx08xx & QJxx08xHx Series

LJxx08xx & QJxx08xHx Series LJxx8xx & QJxx8xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature

More information

Symbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)

Symbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV) 3 Quadrants Standard TRIAC V DRM = 6 V I T(RMS) = 5 A I TSM = 6 A I GT = 35mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 5A) Gate Trigger Current : 35mA High commutation

More information

LJxx08xx & QJxx08xHx Series

LJxx08xx & QJxx08xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,

More information

QJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description

QJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,

More information

Teccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs

Teccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense

More information

Features. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J

Features. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking

More information

Teccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs

Teccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking

More information

Description. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature

Description. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC

More information

Teccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)

Teccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These

More information

Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C

Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes

More information

MAC223A6, MAC223A8, MAC223A10. Triacs. Silicon Bidirectional Thyristors. TRIACS 25 AMPERES RMS 400 thru 800 VOLTS

MAC223A6, MAC223A8, MAC223A10. Triacs. Silicon Bidirectional Thyristors. TRIACS 25 AMPERES RMS 400 thru 800 VOLTS MAC3A6, MAC3A8, MAC3A Triacs Preferred Device Silicon Bidirectional Thyristors Designed primarily for full-wave ac control applications such as lighting systems, heater controls, motor controls and power

More information

Teccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs

Teccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation

More information

Thyristors 30 / 35 Amp Alternistor (High Commutation) Triacs

Thyristors 30 / 35 Amp Alternistor (High Commutation) Triacs Qxx30xHx & Qxx35xHx Series RoHS Description The 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation

More information

MAC08BT1, MAC08MT1. Thyristors. Surface Mount 200V - 600V > MAC08BT1, MAC08MT1. Description

MAC08BT1, MAC08MT1. Thyristors. Surface Mount 200V - 600V > MAC08BT1, MAC08MT1. Description MAC08BT1, MAC08 Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Sensitive

More information

Teccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description

Teccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,

More information

2N6344. Thyristors. Surface Mount V > 2N6344. Description

2N6344. Thyristors. Surface Mount V > 2N6344. Description 2N6344 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled

More information

2N6344A, 2N6348A, 2N6349A

2N6344A, 2N6348A, 2N6349A 2N6344A, 2N6348A, 2N6349A Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon

More information

Teccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C

Teccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C RoHS Description Excellent unidirectional switches for phase control and general switching applications such as heating, motor control controls, converters / rectifiers and capacitive discharge ignitions.

More information

MAC210A8, MAC210A10. Thyristors. Surface Mount 400V - 800V > MAC210A8, MAC210A10. Description

MAC210A8, MAC210A10. Thyristors. Surface Mount 400V - 800V > MAC210A8, MAC210A10. Description MAC210A8, MAC210A10 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full wave silicon gate

More information

Teccor brand Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Teccor brand Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Lxx06xx & Qxx06xx & Qxx06xHx Series RoHS Description 6 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation

More information

Teccor brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Teccor brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Lxx08xx & Qxx08xx & Qxx08xHx Series RoHS Description 8 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation

More information

BTA40 and BTA/BTB41 Series

BTA40 and BTA/BTB41 Series STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general

More information

Description. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet

Description. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less

More information

2N6071A/B Series. Thyristors. Surface Mount 200V-600W > 2N6071A/B Series. Description

2N6071A/B Series. Thyristors. Surface Mount 200V-600W > 2N6071A/B Series. Description 2N6071A/B Series Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate

More information

MC4DCM, MAC4DCN. Thyristors. Surface Mount 600V - 800V > MC4DCM, MAC4DCN. Description

MC4DCM, MAC4DCN. Thyristors. Surface Mount 600V - 800V > MC4DCM, MAC4DCN. Description MCDCM, MACDCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size Surface

More information

2N6394. Thyristors. Surface Mount V > 2N6394. Description

2N6394. Thyristors. Surface Mount V > 2N6394. Description 2N6394 Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies. Features Glass Passivated Junctions for Greater Parameter Uniformity

More information

R L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.

R L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3. S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use

More information

Sidac. (79 V to 330 V) Features. Applications. General Description

Sidac. (79 V to 330 V) Features. Applications. General Description E9 DO15X DO21 Surface Mount TO92 Type 7 TO22 (79 V to 33 V) RoHS E9 General Description The sidac is a silicon bilateral voltage triggered switch with greater powerhandling capabilities than standard diacs.

More information

T x V 25 A Snubberless Triac. Description. Features. Applications. Benefits

T x V 25 A Snubberless Triac. Description. Features. Applications. Benefits 1200 V 25 A Snubberless Triac Description Datasheet production data Its 1200 V blocking voltage enables use in 3-phase industrial application. Its noise immunity and dynamic commutation makes it suitable

More information

MAC12HCDG, MAC12HCMG, MAC12HCNG

MAC12HCDG, MAC12HCMG, MAC12HCNG MAC2HCDG, MAC2HCMG, MAC2HCNG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full wave, silicon gate controlled

More information

MCR12DG, MCR12MG, MCR12NG

MCR12DG, MCR12MG, MCR12NG MCR12DG, MCR12MG, MCR12NG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,

More information

Silicon Bidirectional Thyristors

Silicon Bidirectional Thyristors Preferred Device Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Blocking Voltage to

More information

BTA A Snubberless Triacs. Features. Description. I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma

BTA A Snubberless Triacs. Features. Description. I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma 20 A Snubberless Triacs Datasheet production data Features I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma Description G A2 A1 The Triacs use high performance glass passivated

More information

Features. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL

Features. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD DESCRIPTION Glass passivated, sensitive gate triacs in a full pack plastic envelope, intended for use in general purpose bidirectional switching and phase control applications,

More information

T2550H-600T 25A TRIACS MAIN FEATURES:

T2550H-600T 25A TRIACS MAIN FEATURES: SNUBBERLESS HIGH TEMPERATURE 25A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 25 A V DRM /V RRM 600 V I GT (Q1 ) 50 ma DESCRIPTION Specifically designed for use in high temperature environment (found

More information

2N6400. Thyristors. Surface Mount V > 2N6400. Description

2N6400. Thyristors. Surface Mount V > 2N6400. Description 2N6400 Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled, solid state devices

More information

TIC225 SERIES SILICON TRIACS

TIC225 SERIES SILICON TRIACS Copyright 997, Power Innovations Limited, UK JULY 975 - REVISED MARCH 997 Sensitive Gate Triacs 8 A RMS, 70 A Peak Glass Passivated Wafer 400 V to 800 V Off-State Voltage Max I GT of 5 ma (Quadrant ) MT

More information

MCR8NG. Thyristors. Surface Mount 600V - 800V > MCR8NG. Description

MCR8NG. Thyristors. Surface Mount 600V - 800V > MCR8NG. Description Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled devices are needed.

More information

Teccor brand Thyristors Silicon Controlled Rectifiers

Teccor brand Thyristors Silicon Controlled Rectifiers Sx02xS EV Series Amp Sensitive SCR Description New Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR s junctions are

More information

ACS120. Overvoltage protected AC switch (ACS ) Applications. Description. Features. Benefits

ACS120. Overvoltage protected AC switch (ACS ) Applications. Description. Features. Benefits Overvoltage protected AC switch (ACS ) Applications Datasheet - production data Features Blocking voltage: V DRM / V RRM = +/- 700 V Avalanche controlled: V CL typ. = 1100 V Nominal conducting current:

More information

Teccor brand Thyristors High Energy Bidirectional SIDACs

Teccor brand Thyristors High Energy Bidirectional SIDACs Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in

More information

Features. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J

Features. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated

More information

MAC228A. Thyristors. Surface Mount 400V - 800V > MAC228A. Description

MAC228A. Thyristors. Surface Mount 400V - 800V > MAC228A. Description MAC228A Pb Description Designed primarily for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching

More information

MCR218-2G, MCR218-4G, MCR218-6G

MCR218-2G, MCR218-4G, MCR218-6G MCR218-2G, MCR218-4G, MCR218-6G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled,

More information

Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs. Qxx25xx & Qxx25xHx Series. Description

Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs. Qxx25xx & Qxx25xHx Series. Description Qxx25xx & Qxx25xHx Series RoHS escription This 25 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,

More information

2N6504 Series. Thyristors. Surface Mount V > 2N6504 Series. Description

2N6504 Series. Thyristors. Surface Mount V > 2N6504 Series. Description 2N6504 Series Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Glass Passivated Junctions for

More information

PINNING - SOT186A PIN CONFIGURATION SYMBOL. case

PINNING - SOT186A PIN CONFIGURATION SYMBOL. case BTA8X series B GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated SYMBOL PARAMETER MAX. MAX. MAX. UNIT triacs in a full pack, plastic envelope intended for use in motor control BTA8X- 5B 6B 8B circuits

More information

PINNING - SOT223 PIN CONFIGURATION SYMBOL

PINNING - SOT223 PIN CONFIGURATION SYMBOL BT34W series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated triacs in a plastic SYMBOL PARAMETER MAX. MAX. MAX. UNIT envelope suitable for surface mounting, intended for use in BT34W 5 6 8 applications

More information

2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS

2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.

More information

T2322B. Thyristors Surface Mount 200V > T2322B TO 225AA CASE 77 STYLE 2. Description

T2322B. Thyristors Surface Mount 200V > T2322B TO 225AA CASE 77 STYLE 2. Description T2322B Pb Description Designed primarily for ac power switching. The gate sensitivity of these triacs permits the use of economical transistorized or integrated circuit control circuits, and it enhances

More information

MAC8DG, MAC8MG, MAC8NG

MAC8DG, MAC8MG, MAC8NG MAC8DG, MAC8MG, MAC8NG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,

More information

ACST6. Overvoltage protected AC switch. Applications. Description. Features. Benefits

ACST6. Overvoltage protected AC switch. Applications. Description. Features. Benefits Overvoltage protected AC switch Datasheet - production data OUT TO-220AB ACST610-8T OUT Features COM G OUT COM D²PAK ACST610-8G TO-220FPAB ACST610-8FP Figure 1. Functional diagram G G OUT COM OUT I²PAK

More information

MCR25DG, MCR25MG, MCR25NG

MCR25DG, MCR25MG, MCR25NG MCR25DG, MCR25MG, MCR25NG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled

More information

MAC3030 8G. Triacs. Silicon Bidirectional Thyristors TRIACS 8.0 AMPERES RMS 250 VOLTS

MAC3030 8G. Triacs. Silicon Bidirectional Thyristors TRIACS 8.0 AMPERES RMS 250 VOLTS Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever fullwave silicon

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UT6FF/FG UNISONIC TECHNOLOGIES CO., LTD DESCRIPTION Glass passivated triac in a full pack plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage

More information

SCT25N60FD 600V, 25A STANDARD TRIAC. Features. Applications. Ordering Information. Absolute Maximum Ratings (Limiting Values)

SCT25N60FD 600V, 25A STANDARD TRIAC. Features. Applications. Ordering Information. Absolute Maximum Ratings (Limiting Values) Triac 600V, 25A STANDARD TRIAC This device is suitable for low power AC switching application, phase control application such as fan speed and temperature modulation control, lighting control and static

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD DESCRIPTION Passivated, sensitive gate triacs in a plastic envelope, intended for use in general purpose bidirectional switching and phase control applications, where high

More information

Thyristors 4 Amp High Temperature Sensitive SCRs. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 130 C 4 A I T(AV)

Thyristors 4 Amp High Temperature Sensitive SCRs. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 130 C 4 A I T(AV) RoHS Description This SJxx4x high temperature SCR series is ideal for uni-directional switch applications such as phase control in heating, motor speed controls, converters/rectifiers and capacitive discharge

More information

SCT04N60FD 600V, 4A STANDARD TRIAC. Features. Applications. Ordering Information. Absolute Maximum Ratings (Limiting Values)

SCT04N60FD 600V, 4A STANDARD TRIAC. Features. Applications. Ordering Information. Absolute Maximum Ratings (Limiting Values) Triac 600V, 4A STANDARD TRIAC This device is suitable for low power AC switching application, phase control application such as fan speed and temperature modulation control, lighting control and static

More information

BTA40 and BTA/BTB41 Series

BTA40 and BTA/BTB41 Series STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general

More information

MAC12D, MAC12M, MAC12N

MAC12D, MAC12M, MAC12N MAC12D, MAC12M, MAC12N Pb Description Designed for high performance full wave ac control applications where high noise immunity and commutating di/dt are required. Features Blocking Voltage to 800 Volts

More information

ACST310-8B. Overvoltage protected AC switch. Description. Features. Applications. Benefits

ACST310-8B. Overvoltage protected AC switch. Description. Features. Applications. Benefits Overvoltage protected AC switch Datasheet production data Features AC switch with self over voltage protection Microcontroller direct driven (low gate current max. 10 ma) Three quadrants (Q1, Q2 and Q3)

More information

BTA40 and BTA/BTB41 Series

BTA40 and BTA/BTB41 Series BTA4 and BTA/BTB41 Series STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41

More information

PINNING - TO220AB PIN CONFIGURATION SYMBOL

PINNING - TO220AB PIN CONFIGURATION SYMBOL series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated thyristors in a plastic SYMBOL PARAMETER MAX. MAX. MAX. UNIT envelope, intended for use in applications requiring high - 4R 6R 8R bidirectional

More information

TIC246 SERIES SILICON TRIACS

TIC246 SERIES SILICON TRIACS Copyright 997, Power Innovations Limited, UK DECEMBER 97 - REVISED MARCH 997 High Current Triacs 6 A RMS Glass Passivated Wafer 400 V to 800 V Off-State Voltage 5 A Peak Current Max I GT of 50 (Quadrants

More information

T405Q A sensitivetriacs. Description. Features. Applications

T405Q A sensitivetriacs. Description. Features. Applications 4 A sensitivetriacs G A2 A1 Description Datasheet - production data Sensitive Triacs are intended in general purpose applications where high surge current capability is required. These Triacs feature a

More information

MCR69-2, MCR69-3. Thyristors. Surface Mount V > MCR69-2, MCR69-3. Description. Designed for overvoltage protection in crowbar circuits.

MCR69-2, MCR69-3. Thyristors. Surface Mount V > MCR69-2, MCR69-3. Description. Designed for overvoltage protection in crowbar circuits. 1 2 3 Thyristors MCR69-2, MCR69-3 Pb Description Designed for overvoltage protection in crowbar circuits. Features Glass-Passivated Junctions for Greater Parameter Stability and Reliability Center-Gate

More information

Teccor brand Thyristors 16 Amp Standard SCR V DRM. Symbol Parameter Test Conditions Value Unit V DSM

Teccor brand Thyristors 16 Amp Standard SCR V DRM. Symbol Parameter Test Conditions Value Unit V DSM 16 mp Standard SCR RoHS Description The Littelfuse SCR S8016x series are specifically designed for Electric Vehicle On-Board Charger (EVOBC) applications. This SCR C line input rectifier can handle Level

More information

BTB08-600BW3G, BTB08-800BW3G

BTB08-600BW3G, BTB08-800BW3G BTB08-600BW3G, BTB08-800BW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to

More information

2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS

2N6504 Series. Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 25 AMPERES RMS 50 thru 800 VOLTS Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.

More information

Thyristors 55 Amp Standard SCRs. Symbol Parameter Test Conditions Value Unit Repetitive Peak off-state/reverse Voltage 1600 V V DSM

Thyristors 55 Amp Standard SCRs. Symbol Parameter Test Conditions Value Unit Repetitive Peak off-state/reverse Voltage 1600 V V DSM RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at

More information

Symbol Parameter Value Unit. Repetitive F = 50 Hz. Non Repetitive. Storage and operating junction temperature range - 40 to to + 125

Symbol Parameter Value Unit. Repetitive F = 50 Hz. Non Repetitive. Storage and operating junction temperature range - 40 to to + 125 STANDARD TRIACS FEATURES HIGH SURGE CURRENT CAPABILITY. COMMUTATION : (dv/dt)c > 10V/µs BTA Family : INSULATING VOLTAGE = 2500V (RMS) (UL RECOGNIZED : E81734) A 2 G A1 DESCRIPTION The BTA25 A/B triac family

More information

BTA/BTB12 and T12 Series

BTA/BTB12 and T12 Series SNUBBERLESS, LOIC LEVEL & STANDARD 1A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 1 A V DRM /V RRM 6 and 8 V I T (Q1 ) 5 to 5 ma DESCRIPTION Available either in through-hole or surface-mount packages,

More information

PINNING - SOT186 PIN CONFIGURATION SYMBOL

PINNING - SOT186 PIN CONFIGURATION SYMBOL F series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated triacs in a full pack SYMBOL PARAMETER MAX. MAX. MAX. UNIT plastic envelope, intended for use in applications requiring high F 5 6 8 bidirectional

More information

C122F1G. Thyristors. Surface Mount 50V > C122F1G. Description

C122F1G. Thyristors. Surface Mount 50V > C122F1G. Description Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled, solid state devices

More information

BTA10, BTB10 T1035, T1050 Datasheet

BTA10, BTB10 T1035, T1050 Datasheet BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless, logic level and standard Triacs Features Medium current Triac G A1 Low thermal resistance with clip bonding Low thermal resistance insulation ceramic

More information

BTA16-xxxSW BTB16-xxxSW

BTA16-xxxSW BTB16-xxxSW BTA16-xxxSW BTB16-xxxSW HIGH PERFORMANCE LOGIC LEVEL TRIACS FEATURES IT(RMS) = 16A LOGIC LEVEL TRIGGERING: IGT ma HIGH SURGE CAPABILITY DESCRIPTION The BTA/BTB16-xxxSW triacs are using a high performance

More information

TN B. Standard 15 A SCRs. Description. Features. Application. Benefits

TN B. Standard 15 A SCRs. Description. Features. Application. Benefits Standard 15 A SCRs Description Datasheet - production data The TN1515-600B is a 15 A thyristor SCR housed in DPAK package. It fits any high voltage application that requires a high power density and compact

More information

BTA30H-600CW3G, BTA30H-800CW3G

BTA30H-600CW3G, BTA30H-800CW3G BTA30H-600CW3G, BTA30H-800CW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage

More information

Description. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Schematic Symbol. Samples G

Description. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Schematic Symbol. Samples G Sxx4xSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current

More information

Teccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV)

Teccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV) HS4040xQx Series RoHS Description The HS4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse

More information

MCR8DCM, MCR8DCN. Thyristors. Surface Mount 600V - 800V > MCR8DCM, MCR8DCN G K. Description

MCR8DCM, MCR8DCN. Thyristors. Surface Mount 600V - 800V > MCR8DCM, MCR8DCN G K. Description MCR8DCM, MCR8DCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size

More information

2N6344. Silicon Bidirectional Thyristors. TRIACS 8 AMPERES RMS 600 thru 800 VOLTS

2N6344. Silicon Bidirectional Thyristors. TRIACS 8 AMPERES RMS 600 thru 800 VOLTS Preferred Device Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever

More information

T1635T-8FP. 16 A Snubberless Triac. Features. Applications. Description

T1635T-8FP. 16 A Snubberless Triac. Features. Applications. Description 16 A Snubberless Triac G A A1 Features Datasheet production data Medium current Triac High static and dynamic commutation Three quadrants ECOPACK compliant component Complies with UL standards (File ref:

More information

MCR8DSM, MCR8DSN. Thyristors. Surface Mount 600V - 800V > MCR8DSM, MCR8DSN G K. Description

MCR8DSM, MCR8DSN. Thyristors. Surface Mount 600V - 800V > MCR8DSM, MCR8DSN G K. Description MCR8DSM, MCR8DSN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size

More information

MCR12DCM, MCR12DCN. Thyristors. Surface Mount 400V - 800V > MCR12DCM, MCR12DCN G K. Description

MCR12DCM, MCR12DCN. Thyristors. Surface Mount 400V - 800V > MCR12DCM, MCR12DCN G K. Description MCR12DCM, MCR12DCN Pb Description This thyristor is designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD DESCRIPTION Glass passivated triac in a full pack plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability

More information

T4 series. 4 A Triacs. Features. Applications. Description. Table 2. Device summary

T4 series. 4 A Triacs. Features. Applications. Description. Table 2. Device summary 4 A Triacs Datasheet production data. Table 1. Main characteristics Symbol Value Unit I T(rms) 4 A V DRM, V RRM 600 to 800 V I GT 5 to 35 ma Table 2. Device summary Symbol Marking Features Three quadrants

More information

Kxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description

Kxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance

More information

BTA10-600GP. 10 A Triac. Features. Description

BTA10-600GP. 10 A Triac. Features. Description 10 A Triac Features Low I H : 13 ma max High surge current: I TSM = 120 A I GT specified in four quadrants Insulating voltage: 2500 V (RMS) (UL Recognized: E81734) G A2 A1 Description The BTA10-600GP uses

More information

BTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description

BTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description BTA08-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage to 800 On-State

More information

Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 75 C 0.8 A I T(AV) Average on-state current T C

Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 75 C 0.8 A I T(AV) Average on-state current T C EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps

More information