Teccor brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs
|
|
- Karin Fox
- 5 years ago
- Views:
Transcription
1 escription 25 mp bi-directional solid state switch series is designed for switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Standard type devices normally operate in Quadrants I & III triggered from line. lternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. eatures & enefits gency pproval gency gency ile Number RoS compliant lass passivated junctions Voltage capability up to 1000 V Surge capability up to 250 TO-220L, TO-218K, TO-218J & astpak Packages: E71639 pplications Main eatures Symbol Value Unit I T(RMS) 25 RM /V RRM 1000 V I T 50 to 80 m Schematic Symbol Excellent for switching and phase control applications such as heating, lighting, and motor speed controls. Typical applications are solid-state switches, industrial power tools, exercise equipment, white goods and commercial appliances. lternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. MT1 117
2 bsolute Maximum Ratings Standard Triac I T(RMS) I TSM I 2 t Symbol Parameter Test onditions Value Unit RMS on-state current Peak non-repetitive surge current I 2 t Value for fusing T = 85 Qxx25P5 T = 57 Qxx25P5 single half cycle; f = 50z; single half cycle; f = 60z; single half cycle; f = 50z; single half cycle; f = 60z; t p = 8.3ms Qxx25P5 260 di/dt ritical rate-of-rise of on-state current f = 60z; = /μs I TM Peak gate current = P (V) verage gate power dissipation = W T stg Storage temperature range -40 to 125 Operating junction temperature range -40 to 125 Qxx25P5-25 to s bsolute Maximum Ratings lternistor Triac I T(RMS) I TSM Symbol Parameter Test onditions Value Unit RMS on-state current Peak non-repetitive surge current Qxx25L5 Qxx25L6 Qxx25K6 Qxx25J6 Qxx25R5 Qxx25N5 Qxx25R6 Qxx25N6 T = 65 T = 85 T = 95 single half cycle; f = 50z; single half cycle; f = 60z; 25 I 2 t I 2 t Value for fusing t p = 8.3ms s di/dt ritical rate-of-rise of on-state current f = 60z; = /μs I TM Peak gate current = P (V) verage gate power dissipation = W T stg Storage temperature range -40 to 125 Operating junction temperature range -40 to 125 Note: xx = voltage
3 Electrical haracteristics ( = 25, unless otherwise specified) Standard Triac Symbol Test onditions Quadrant I T V = 12V; RL = 60 Ω I II III MX. 50 Value IV TYP. 120 V T I II III MX. 1.3 IV TYP. 2.5 Qxx25P5 V = RM ; R L = 3.3 kω ; = 125 LL MIN. 0.2 V I I T = 400m (initial) MX m dv/dt = RM ; ate Open; = V V MIN. 800V = RM ; ate Open; = V 200 (dv/dt)c (di/dt)c = 13.3 /ms; = 125 MIN. 5 V/μs t gt I = 2 x I T ; PW = 15µs; I T = 35.4 TYP. 4 3 μs Unit m V V/μs Electrical haracteristics ( = 25, unless otherwise specified) lternistor Triac Symbol Test onditions Quadrant Qxx25R5 Qxx25L5 Qxx25N5 Value Qxx25R6 Qxx25L6 Qxx25N6 Qxx25K6 Qxx25J6 I T I II III MX m = 12V; R L = 60 Ω V T I II III MX. 1.3 V V = RM ; R L = 3.3 kω ; = 125 I II III MIN. 0.2 V I I T = 400m (initial) MX m dv/dt = RM ; ate Open; = V V MIN. 800V = RM ; ate Open; = V 400 (dv/dt)c (di/dt)c = 13.3 /ms; = 125 MIN V/μs t gt I = 2 x I T ; PW = 15µs; I T = 35.4 TYP. 3 5 μs Unit V/μs Static haracteristics Symbol Test onditions Qxx25x5 Qxx25x6 Qxx25N6 Value Qxx25P5 V TM I T = 35.4; t p = 380 μs MX V I RM / I RRM RM / V RRM Note: xx = voltage, x = package = 25 = V V V MX V 1000 = V Unit μ 119
4 Thermal Resistances Symbol Parameter Value Unit R θ(j-) Junction to case () / Qxx25R6 / Qxx25N6 Qxx25R5 / Qxx25N Qxx25P5 1.6 Qxx25L6 / Qxx25L5 2.0 Qxx25K6 / Qxx25J /W R θ(j-) Junction to ambient Qxx25Ry 45 Qxx25L6 / Qxx25L5 50 /W Note: xx = voltage, y = sensitivity igure 1: Normalized ate Trigger urrent vs. Junction Temperature igure 2: Normalized ate Trigger Voltage vs. Junction Temperature Ratio of I T /I T ( = 25 ) Ratio of V T / V T ( = 25º) Junction Temperature ( ) -- ( ) Junction Temperature ( ) -- (º) igure 3: Normalized olding urrent vs. Junction Temperature igure 4: On-State urrent vs. On-State Voltage (Typical) Ratio of I / I ( = 25º) Junction Temperature ( ) -- (º) Instantaneous On-state urrent (i T ) mps = 25 Qxx25P5/Qxx25R6 Qxx25L6/Qxx25N6 Qxx25K6/Qxx25J6 Qxx25R5/Qxx25L5 Qxx25N Instantaneous On-state Voltage (v T ) Volts 120
5 igure 5: Power issipation (Typical) vs. RMS On-State urrent igure 6: Maximum llowable ase Temperature vs. RMS On-State urrent verage On-State Power issipation [P (V) ] -- Watts URRENT WVEORM: Sinusoidal LO: Resistive or Inductive ONUTION NLE: RMS On-State urrent [I T(RMS) ] -- mps Qxx25P5/Qxx25R6 Qxx25L6/Qxx25N6 Qxx25K6/Qxx25J6 Qxx25R5/Qxx25L5 Qxx25N5 Maximum llowable ase Temperature (T ) Qxx25L6 Qxx25L5 Qxx25P5 Qxx25R6 Qxx25N6 Qxx25R5 Qxx25N5 Qxx25K6 Qxx25J6 URRENT WVEORM: Sinusoidal 60 LO: Resistive or Inductive ONUTION NLE: RMS On-State urrent [I T(RMS) ] - mps igure 7: Maximum llowable mbient Temperature vs. RMS On-State urrent (TO-220 packages only) Maximum llowable mbient Temperature (T ) URRENT WVEORM: Sinusoidal LO: Resistive or Inductive ONUTION NLE: 360 REE IR RTIN RMS On-State urrent [I T(RMS) ] -- mps igure 8: Surge Peak On-State urrent vs. Number of ycles Peak Surge (Non-repetitive) On-state urrent (I TSM ) mps Qxx25P5/Qxx25R6 Qxx25L6/Qxx25N6 Qxx25K6/Qxx25J6 Qxx25R5/Qxx25L5 Qxx25N5 SUPPLY REQUENY: 60 z Sinusoidal LO: Resistive RMS On-State urrent: [I T(RMS) ]: Maximum Rated Value at Specified ase Temperature Notes: 1. ate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value Surge urrent uration -- ull ycles 121
6 Temperature Teccor brand Thyristors Soldering Parameters Reflow ondition Pb ree assembly T P t P - Temperature Min (T s(min) ) 150 Ramp-up Pre eat - Temperature Max (T s(max) ) Time (min to max) (t s ) secs verage ramp up rate (Liquidus Temp) (T L ) to peak 5 /second max T L T S(max) T S(min) Preheat t L Ramp-down T S(max) to T L - Ramp-up Rate 5 /second max t S - Temperature (T L ) (Liquidus) 217 Reflow - Temperature (t L ) seconds Peak Temperature (T P ) /-5 25 time to peak temperature Time Time within 5 of actual peak Temperature (t p ) seconds Ramp-down Rate 5 /second max Time 25 to peak Temperature (T P ) 8 minutes Max. o not exceed 280 Physical Specifications Terminal inish ody Material Lead Material esign onsiderations 100% Matte Tin-plated UL recognized epoxy meeting flammability classification 94V-0 opper lloy areful selection of the correct device for the application s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. ood design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. orrect mounting, soldering, and forming of the leads also help protect against component damage. Environmental Specifications Test igh Temperature Voltage locking Temperature ycling iased Temp & umidity igh Temp. Storage Low-Temp Storage Thermal Shock utoclave (Pressure ooker Test) Resistance to Solder eat Solderability Lead end Specifications and onditions MIL-ST-750: Method 1040, ondition Rated V RRM, 125, 1008 hours MIL-ST-750: Method to 125, 15-minute dwell, 100 cycles EI/JEE: JES V, 85, 85%R, 1008 hours MIL-ST-750: Method , 1008 hours -40, 1008 hours MIL-ST-750: Method to 100, 5-minute dwell, 10-second transfer, 10 cycles EI/JEE: JES , 100%R, 2atm, 168 hours MIL-ST-750: Method , 10 seconds NSI/J-ST-002, ategory 3, Test MIL-ST-750: Method 2036, ondition E 122
7 s TO-220 (R Package) Non-isolated Mounting Tab Ø E T MESURIN POINT O P RE (RE.) 0.17 IN L R NOT IN TE LE TO I. NON-ISOLTE T E K J MT1 TE N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). J K L M N O P R s TO-220 (L Package) Isolated Mounting Tab Ø E T MESURIN POINT RE (RE.) 0.17 IN 2 O P E L R K J MT1 TE N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm) J K L M N O P R
8 s TO-263 (N Package) 2 Pak Surface Mount V T MESURIN POINT E RE: 0.11 IN S W U MT1 TE K J E J K S V U W s TO-218 (K Package) Isolated Mounting Tab T Measurement Point U (diameter) P MT1 R L K E ate M Q N W J Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm) E J K L M N P Q R U W
9 s TO-218X (J Package) Isolated Mounting Tab T c Measurement Point MT1 W T M N Y K V L E Z X J ate R S P U (diameter) Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm) E J K L M N P R S T U V W X Y Z s TO-3 (P Package) astpak Isolated Mounting Tab MT1 ate Φ E T MeasuringPoint I T Φ J (MT1, ) U R M L W V Φ K (ate) Q 5 - Φ N S O P Thickness off all three copper-alloy terminals is.032" (0.81 mm) E I J K L M N O P Q R S T (MT1) T () T (ate) U (MT1) U () U (ate) V W Maximum torque to be applied to mounting tab is 8 in-lbs (0.904Nm). 125
10 Product Selector Part Number Voltage ate Sensitivity Quadrants 400V 600V 800V 1000V I - II - III IV Package X X X X 50 m 120 m (TYP) TO-220R X X X X 50 m 120 m (TYP) TO Pak Qxx25P5 X X 50 m 120 m (TYP) astpak Qxx25R5 X X X 50 m TO-220R Qxx25L5 X X X 50 m TO-220L Qxx25N5 X X X 50 m TO Pak Qxx25R6 X X X X 80 m TO-220R Qxx25L6 X X X X 80 m TO-220L Qxx25N6 X X X X 80 m TO Pak Qxx25J6 X X X 80 m TO-218X Qxx25K6 X X X X 80 m TO-218 Packing Options Part Number Marking Weight Packing Mode ase Quantity 2.20g ulk 500 TP 2.20g Tube 500 (50 per tube) TP 1.60g Tube 500 (50 per tube) RP 1.60g Embossed arrier 500 Qxx25R5 Qxx25R5 2.20g ulk 500 Qxx25R5TP Qxx25R5 2.20g Tube 500 (50 per tube) Qxx25L5 Qxx25L5 2.20g ulk 500 Qxx25L5TP Qxx25L5 2.20g Tube 500 (50 per tube) Qxx25N5TP Qxx25N5 1.60g Tube 500 (50 per tube) Qxx25N5RP Qxx25N5 1.60g Embossed arrier 500 Qxx25P5 Qxx25P5 21.4g ulk 200 Qxx25R6 Qxx25R6 2.20g ulk 500 Qxx25R6TP Qxx25R6 2.20g Tube 500 (50 per tube) Qxx25L6 Qxx25L6 2.20g ulk 500 Qxx25L6TP Qxx25L6 2.20g Tube 500 (50 per tube) Qxx25N6TP Qxx25N6 1.60g Tube 500 (50 per tube) Qxx25N6RP Qxx25N6 1.60g Embossed arrier 500 Qxx25J6TP Qxx25J6 5.23g Tube 250 (25 per tube) Qxx25K6TP Qxx25K6 4.40g Tube 250 (25 per tube) 126
11 Teccor brand Thyristors TO-263 Embossed arrier Reel Pack (RP) Specifications Meets all EI Standards 0.63 (16.0) (4.0) ate I (1.5) MT1 / athode (24.0) (21.0) * * over tape / node (13.0) rbor ole ia (330.0) s are in inches (and millimeters) (25.7) irection of eed Part Numbering System Part Marking System EVIE TYPE Q: Triac or lternistor VOLTE RTIN 40: 400V 60: 600V 80: 800V K0: 1000V URRENT RTIN 25: 25 Q N 6 SENSITIVITY Standard Triac 5: 50m lternistor 5: 50m 6: 80m 6: 80m PKE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 ( 2 -Pak) K : TO-218 Isolated J : TO-218X Isolated P : astpak Q6025R5 YM TO-218 (K Package) TO-218X (J Package) Q6025K6 YMLXX Q6025L5 MY astpak (P Package) Q6025P5 YMXXX 127
Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs. Qxx25xx & Qxx25xHx Series. Description
Qxx25xx & Qxx25xHx Series RoHS escription This 25 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationThyristors 30 / 35 Amp Alternistor (High Commutation) Triacs
Qxx30xHx & Qxx35xHx Series RoHS Description The 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTeccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description
Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationTeccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation
More informationTeccor brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx08xx & Qxx08xx & Qxx08xHx Series RoHS Description 8 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTeccor brand Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx06xx & Qxx06xx & Qxx06xHx Series RoHS Description 6 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTeccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV)
HS4040xQx Series RoHS Description The HS4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse
More informationTeccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs
QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense
More informationThyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C
Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationThyristors 8 Amp Sensitive & Standard SCRs. Sxx08xSx & Sxx08x Series. Description
Sxx08xSx & Sxx08x Series RoHS Description This Sxx08x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q6012xH1LED Series RoHS Description Q6012LH1LED series is designed to meet low load current characteristics typical in LED lighting applications. By keeping holding current at 8mA maximum, this Triac series
More informationTeccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)
RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These
More informationTeccor brand Thyristors 16 Amp Standard SCR V DRM. Symbol Parameter Test Conditions Value Unit V DSM
16 mp Standard SCR RoHS Description The Littelfuse SCR S8016x series are specifically designed for Electric Vehicle On-Board Charger (EVOBC) applications. This SCR C line input rectifier can handle Level
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Schematic Symbol. Samples G
Sxx4xSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC
More informationSymbol Parameter Test Conditions Value Unit RMS on-state current T C = 75 C 0.8 A I T(AV) Average on-state current T C
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
More informationFeatures. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
More informationLJxx08xx & QJxx08xHx Series
RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationLJxx08xx & QJxx08xHx Series
LJxx8xx & QJxx8xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature
More informationTeccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C
RoHS Description Excellent unidirectional switches for phase control and general switching applications such as heating, motor control controls, converters / rectifiers and capacitive discharge ignitions.
More informationFeatures. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J
L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationDK208D Rectifier Diode
DK208D Rectifier Diode RoHS Description This DK208D 8, 1200V rated standard recovery rectifier diode in a compact TO-252 surface mount package is ideal as a bypass diode or anti-parallel diode for active
More informationTeccor brand Thyristors High Energy Unidirectional SIDACs
K2xx0yHU Series RoHS Description The new K2xx0yHU is a higher energy SIDC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet
Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs
LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationThyristors 55 Amp Standard SCRs. Symbol Parameter Test Conditions Value Unit Repetitive Peak off-state/reverse Voltage 1600 V V DSM
RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at
More informationTeccor brand Thyristors Silicon Controlled Rectifiers
Sx02xS EV Series Amp Sensitive SCR Description New Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR s junctions are
More informationThyristors 4 Amp High Temperature Sensitive SCRs. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 130 C 4 A I T(AV)
RoHS Description This SJxx4x high temperature SCR series is ideal for uni-directional switch applications such as phase control in heating, motor speed controls, converters/rectifiers and capacitive discharge
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More informationKxxx0yU SIDAC Series. Thyristors Standard Unidirectional SIDACs. RoHS. Description
Standard Unidirectional SIDCs xxx0yu SIDC Series RoHS Description The SIDC is a silicon unilateral voltage triggered switch. Upon application of a voltage exceeding the SIDC breakover voltage point, the
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationFeatures. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL
Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp
More information(1 A to 70 A) Features. Compak SCR
Selected Packages* File #E71639 U.L. RECONIZED TO-263 D 2 Pak TO-92 *TO-218 TO-252 D-Pak TO-22 *TO-218X 3-lead Compak *TO-22 TO-251 V-Pak (1 to 7 ) E6 eneral Description The Teccor line of thyristor SCR
More informationKxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency Pinout Designation Line in Ground Line in Schematic Symbol Line In (1 -Bias
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. MC Multiport Series - MS-013. Description
MC Multiport Series - MS-13 RoHS Pb e3 Description The MC Multiport Series MS-13 are low capacitance SIDCtor thyristors designed to protect broadband equipment from damaging overvoltage transients. The
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency gency ile Number The new SEP (SIDCtor Thyristor Ethernet/PoE Protector series
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Balanced Series - MS-013. Description
SIDCtor Balanced Series - MS- RoHS Pb e Description The SIDCtor Balanced Series MS- are designed to protect baseband equipment from overvoltage transients. The patented Y configuration ensures balanced
More informationTeccor brand Thyristors Standard Bidirectional DIAC Trigger
Description The HTM, HT, and ST series of bilateral trigger DIACs offer a range of voltage characteristics from 27V to 70V. A DIAC semiconductor is a full-wave or bidirectional Thyristor. It is triggered
More informationTriacs. (0.8 A to 35 A) Features. Compak Package. General Description
* Selected Packages U.L. RECONIZED File #E71639 E2 TO-92 TO-22 *TO-22 3-lead Compak TO-263 D 2 Pak TO-252 D-Pak *TO-3 Fastpak TO-251 V-Pak (.8 A to 35 A) RoHS E2 eneral Description These gated triacs from
More informationSensitive Triacs. ( Amps) Features
Selected Packages* U.L. RECOGNIZED File #E71639 TO - 92 THERMOTAB TO-22AB TO-22AB G Sensitive Triacs (.8 8. ) 11 General Description Teccor's line of sensitive gate triacs includes devices with current
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationTriacs. ( Amps) Features
Selected Packages* U.L. RECOGNIZED File #E71639 THERMOTAB TO-22AB TO - 92 TO-22AB G Triacs (.8 25 ) 2 General Description These gated triacs from Teccor Electronics are part of a broad line of bidirectional
More informationMAC08BT1, MAC08MT1. Thyristors. Surface Mount 200V - 600V > MAC08BT1, MAC08MT1. Description
MAC08BT1, MAC08 Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Sensitive
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. * Selected Packages U.L. RECONIZED File #E71639 E4 *TO-22 *TO-218X *TO-218
More informationBTA40 and BTA/BTB41 Series
STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general
More informationT x V 25 A Snubberless Triac. Description. Features. Applications. Benefits
1200 V 25 A Snubberless Triac Description Datasheet production data Its 1200 V blocking voltage enables use in 3-phase industrial application. Its noise immunity and dynamic commutation makes it suitable
More informationMC4DCM, MAC4DCN. Thyristors. Surface Mount 600V - 800V > MC4DCM, MAC4DCN. Description
MCDCM, MACDCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size Surface
More informationACST310-8B. Overvoltage protected AC switch. Description. Features. Applications. Benefits
Overvoltage protected AC switch Datasheet production data Features AC switch with self over voltage protection Microcontroller direct driven (low gate current max. 10 ma) Three quadrants (Q1, Q2 and Q3)
More informationT1610, T1635, T1650 BTA16, BTB16 Datasheet
T1610, T1635, T1650 BTA16, BTB16 Datasheet Snubberless, logic level and standard 16 A Triacs A2 Features Medium current Triac A2 G A1 Low thermal resistance with clip bonding Low thermal resistance insulation
More informationADV. ADV Scan the QR code to view the latest product information ADT40C60H/80H. 3 Quadrants Triacs. General Description. Features
3 Quadrants Triacs General Description High current density due to mesa technology. the DT4C triac series is suitable for general purpose C switching. They can be used as an ON/OFF function in applications
More informationPOW-R-BLOK TM Dual SCR Isolated Module 500 Amperes / Up to 1600 Volts. LD43 50 Dual SCR POW-R-BLOK TM Module 500 Amperes / Volts
mperes / Up to 16 Volts R OUTLINE DRWING B C J F 1 3 L H Q - DI. (4 TYP.) P - M1 THD (3 TYP.) T - (4 TYP.) S 4 7 5 6 E K M G D LD43 5 Dual SCR Module mperes / 8-16 Volts LD43 Outline Dimensions Dimension
More informationMAC12HCDG, MAC12HCMG, MAC12HCNG
MAC2HCDG, MAC2HCMG, MAC2HCNG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full wave, silicon gate controlled
More informationADV. ADV Scan the QR code to view the latest product information ADS12C60F/80F. 3 Quadrants Triacs. General Description. Features
3 Quadrants Triacs General Description High current density due to mesa technology.the DS12C triac series is suitable for general purpose C switching. They can be used as an ON/OFF function in applications
More informationT405Q A sensitivetriacs. Description. Features. Applications
4 A sensitivetriacs G A2 A1 Description Datasheet - production data Sensitive Triacs are intended in general purpose applications where high surge current capability is required. These Triacs feature a
More informationBTA/BTB12 and T12 Series
SNUBBERLESS, LOIC LEVEL & STANDARD 1A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 1 A V DRM /V RRM 6 and 8 V I T (Q1 ) 5 to 5 ma DESCRIPTION Available either in through-hole or surface-mount packages,
More informationMAC228A. Thyristors. Surface Mount 400V - 800V > MAC228A. Description
MAC228A Pb Description Designed primarily for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching
More informationMAC210A8, MAC210A10. Thyristors. Surface Mount 400V - 800V > MAC210A8, MAC210A10. Description
MAC210A8, MAC210A10 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full wave silicon gate
More informationBTA10, BTB10 T1035, T1050 Datasheet
BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless, logic level and standard Triacs Features Medium current Triac G A1 Low thermal resistance with clip bonding Low thermal resistance insulation ceramic
More informationPOW-R-BLOK TM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts CD62 15B, CD67 15B
5 mperes / Up to Volts B G "J" () OUTLINE DRWING D E F F 6 7 4 5 M "K" () R S Description: Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging.
More informationT4 series. 4 A Triacs. Features. Applications. Description. Table 2. Device summary
4 A Triacs Datasheet production data. Table 1. Main characteristics Symbol Value Unit I T(rms) 4 A V DRM, V RRM 600 to 800 V I GT 5 to 35 ma Table 2. Device summary Symbol Marking Features Three quadrants
More informationBTA12, BTB12, T1205 T1210, T1235, T1250 Datasheet
BTA12, BTB12, T1205 T1210, T1235, T1250 Datasheet 12 A Snubberless, logic level and standard Triacs A2 Features Medium current Triac G A1 Low thermal resistance with clip bonding Low thermal resistance
More informationADV. ADV Scan the QR code to view the latest product information ADS4CH60/80. 3 Quadrants High temperature Triacs. General Description.
3 Quadrants High temperature Triacs General Description High current density due to mesa technology, guaranteed maximum junction temperature C. The DS4CH triac series is suitable for general purpose C
More informationSymbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6V I T(RMS) = 4 A I TSM = 4 A I GT = 5mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 4A) Gate Trigger Current : 5mA High commutation
More informationFeatures. Applications. This device is phase control : V DRM =600V. Marking Diagram SCT04N60D TO-252 SCT04N600. Triac TO-252. Rating.
Triac 600V, 4 STNDRD TRIC This device is suitable for low power C switching application, phase control application such as fan speed and temperature modulation control, lighting control and static switching
More informationACS120. Overvoltage protected AC switch (ACS ) Applications. Description. Features. Benefits
Overvoltage protected AC switch (ACS ) Applications Datasheet - production data Features Blocking voltage: V DRM / V RRM = +/- 700 V Avalanche controlled: V CL typ. = 1100 V Nominal conducting current:
More informationMAC16DG, MAC16MG, MAC16NG
MAC6DG, MAC6MG, MAC6NG Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking Voltage to 800
More informationSymbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6 V I T(RMS) = 5 A I TSM = 6 A I GT = 35mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 5A) Gate Trigger Current : 35mA High commutation
More informationT1235H, T1250H. High temperature 12 A Snubberless Triacs. Features. Applications. Description
High temperature 12 A Snubberless Triacs Features Medium current Triac 150 C max. T j turn-off commutation Low thermal resistance with clip bonding Very high 3 quadrant commutation capability G A1 Packages
More informationMCR8NG. Thyristors. Surface Mount 600V - 800V > MCR8NG. Description
Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled devices are needed.
More informationBTA A Snubberless Triacs. Features. Description. I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma
20 A Snubberless Triacs Datasheet production data Features I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma Description G A2 A1 The Triacs use high performance glass passivated
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. BTA16, BTB16 and T16 Series SNUBBERLESS, LOGIC LEVEL & STANDARD 16A TRIACS
More informationACS1026T. AC switch family Transient protected AC switch (ACS ) Main product characteristics OUT COM TO-92 SO-8 ACS102-6T1 ACS102-6T1-TR.
AC switch family Transient protected AC switch (ACS ) Main product characteristics Overvoltage protection by crowbar technology High noise immunity - static dv/dt > 300 V/µs Applications AC ON/OFF static
More informationMCR08B, MCR08M. Thyristors. Surface Mount 600V - 800V > MCR08B, MCR08M G K. Description
MCR8B, MCR8M Pb Description PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection
More informationACST6. Overvoltage protected AC switch. Applications. Description. Features. Benefits
Overvoltage protected AC switch Datasheet - production data OUT TO-220AB ACST610-8T OUT Features COM G OUT COM D²PAK ACST610-8G TO-220FPAB ACST610-8FP Figure 1. Functional diagram G G OUT COM OUT I²PAK
More informationT2550H-600T 25A TRIACS MAIN FEATURES:
SNUBBERLESS HIGH TEMPERATURE 25A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 25 A V DRM /V RRM 600 V I GT (Q1 ) 50 ma DESCRIPTION Specifically designed for use in high temperature environment (found
More informationBTA16-600BW3G, BTA16-800BW3G,
BTA6-600BW3G, BTA6-800BW3G, Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to
More informationBTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description
BTA08-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage to 800 On-State
More informationObsolete Product(s) - Obsolete Product(s)
Snubberless high temperature 20 A Triacs Main features Symbol Value Unit I T(RMS) 20 A V DRM /V RRM 600 V I GT (Q1) 35 ma T j MAX 150 C Description Specifically designed to operate at 150 C, the new 20
More informationT1635T-8FP. 16 A Snubberless Triac. Features. Applications. Description
16 A Snubberless Triac G A A1 Features Datasheet production data Medium current Triac High static and dynamic commutation Three quadrants ECOPACK compliant component Complies with UL standards (File ref:
More informationACST1635-8FP. Overvoltage protected AC switch. Description. Features. Applications
Overvoltage protected AC switch Description Datasheet production data Features OUT COM TO-220FPAB Enables equipment to meet IEC 61000-4-5 surge with overvoltage crowbar technology High noise immunity against
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIJI MIROLTRONIS O., Ltd JST12 Series 12 TRIs Rev.3.0 SRIPTION: With high ability to withstand the shock loading of large current, JST12 series triacs provide high dv/dt rate with strong resistance to
More informationPOW-R-BLOK TM Dual SCR Isolated Module 150 Amperes / Up to 1600 Volts. CD63 15A Dual SCR Isolated POW-R-BLOK TM Module 150 Amperes / Up to 1600 Volts
CD63 15 15 mperes / Up to 16 B G "J" (3) OUTLINE DRWING D E F F 7 6 1 2 3 5 4 M F "K" (2) S Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated
More informationBTA/BTB12 and T12 Series
BTA/BTB1 and T1 Series SNUBBERLESS, LOIC LEVEL & STANDARD 1A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 1 A V DRM /V RRM 6 and 8 V I T (Q1 ) to 5 ma DESCRIPTION Available either in through-hole or
More informationBTA40 and BTA/BTB41 Series
STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general
More informationBTA10 and BTB10 Series
BTA and BTB Series SNUBBERLESS & STANDARD A TRIACS Table : Main Features Symbol Value Unit I T(RMS) A V DRM /V RRM 6 and 8 V G A I GT (Q ) 5 to 5 ma DESCRIPTION Available either in through-hole or surface-mount
More informationT835T-8I. 8 A Snubberless Triac
8 A Snubberless Triac Datasheet - production data Features High static dv/dt High dynamic commutation 150 C maximum Tj Three quadrants Built-in ceramic for tab insulation Compliance to UL1557 standard
More informationMAC12D, MAC12M, MAC12N
MAC12D, MAC12M, MAC12N Pb Description Designed for high performance full wave ac control applications where high noise immunity and commutating di/dt are required. Features Blocking Voltage to 800 Volts
More informationBTA25-600CW3G, BTA25-800CW3G
BTA25-600CW3G, BTA25-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage
More informationBTA40 and BTA/BTB41 Series
BTA4 and BTA/BTB41 Series STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41
More informationMCR8SDG, MCR8SMG, MCR8SNG
MCR8SDG, MCR8SMG, MCR8SNG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled
More informationT1635H, T1650H. High temperature 16 A Snubberless Triacs. Applications. Description. Features
High temperature 16 A Snubberless Triacs Datasheet - production data D²PAK T16xxH-6G Features G A1 A1 G TO-220AB insulated T16xxH-6I Medium current Triac 150 C max. T j turn-off commutation Low thermal
More informationValue Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C)
MAIN FEATURES: DIODE / SCR MODULE Symbol Value Unit I T(RMS) 50-70-85 A V DRM /V RRM 800 and 1200 V I GT 50 and 100 ma DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge
More informationBTA/BTB12 and T12 Series
BTA/BTB1 and T1 Series SNUBBERLESS, LOIC LEVEL & STANDARD 1A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 1 A V DRM /V RRM 6 and 8 V I T (Q1 ) 5 to 5 ma DESCRIPTION Available either in through-hole
More informationCD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems
More informationBTA16, BTB16 T1610, T1635
BTA16, BTB16 T1610, T1635 16 A Snubberless, logic level and standard Triacs Features Medium current Triac Low thermal resistance with clip bonding Low thermal resistance insulation ceramic for insulated
More informationT2322B. Thyristors Surface Mount 200V > T2322B TO 225AA CASE 77 STYLE 2. Description
T2322B Pb Description Designed primarily for ac power switching. The gate sensitivity of these triacs permits the use of economical transistorized or integrated circuit control circuits, and it enhances
More informationMAC8DG, MAC8MG, MAC8NG
MAC8DG, MAC8MG, MAC8NG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,
More information