BTA10, BTB10 T1035, T1050 Datasheet

Size: px

Start display at page:

Download "BTA10, BTB10 T1035, T1050 Datasheet"

Isabel Webster
5 years ago
Views:

1 BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless, logic level and standard Triacs Features Medium current Triac G A1 Low thermal resistance with clip bonding Low thermal resistance insulation ceramic for insulated BTA High commutation (4Q) or very high commutation (3Q, Snubberless ) capability BTA series UL1557 certified (file ref: 81734) G A1 G A1 Packages are RoHS (2002/95/EC) compliant TO-220AB TO-220AB Ins. Description D²PAK A1 G Available either in through-hole or surface mount packages, the BTA10, BTB10 and T10xx Triac series are suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers. The Snubberless versions (W suffix and T10xx) are especially recommended for use on inductive loads, because of their high commutation performance. By using an internal ceramic pad, the Snubberless series provide an insulated tab (rated at 2500 V RMS ) complying with UL standards (file reference: E81734). Product status link BTA10, BTB10, T1035, T1050 Product summary I T(RMS) V DRM /V RRM I GT 10 A 600 and 800 V 25 to 50 ma DS Rev 8 - March 2018 For further information contact your local STMicroelectronics sales office.

2 Characteristics 1 Characteristics Table 1. Absolute maximum ratings Symbol Parameters Value Unit I T(RMS) RMS on-state current (full sine wave) TO-220AB T c = 105 C TO-220AB Ins. T c = 95 C 10 A I TSM Non repetitive surge peak on-state current (full cycle, T j initial = 25 C) F = 50 Hz t p = 20 ms 100 F = 60 Hz t p = 16.7 ms 105 A I 2 t I 2 t value for fusing t p = 10 ms 55 A 2 s dl/dt Critical rate of rise of on-state current I G = 2 x I GT, t r 100 ns F = 120 Hz T j = 125 C 50 A/µs V DSM /V RSM Non repetitive surge peak off-state voltage t p = 10 ms T j = 25 C V DRM /V RRM V I GM Peak gate current t p = 20 µs T j = 125 C 4 A P G(AV) Average gate power dissipation T j = 125 C 1 W T stg Storage junction temperature range -40 to +150 C T j Operating junction temperature range -40 to +125 C Table 2. Static electrical characteristics Symbol Test conditions T j Value Unit V (1) T I TM = 14 A, t p = 380 µs 25 C Max V V TO threshold on-state voltage 125 C Max V R D Dynamic resistance 125 C Max. 40 mω I DRM /I RRM V DRM = V RRM 25 C Max. 5 µa 125 C 1 ma 1. For both polarities of referenced to A1 Table 3. Electrical characteristics (T j = 25 C, unless otherwise specified) - Snubberless (3 quadrants) Symbol Parameters Quadrant T1035 BTA10-xCW BTB10-xCW T1050 BTA10-xBW BTB10-xBW Unit I GT I - II - III Max ma V D = 12 V, R L = 33 Ω V GT I - II - III Max. 1.3 V V GD V D = V DRM, R L = 3,3 kω, T j = 125 C I - II - III Min. 0.2 V I H I T = 500 ma I - II - III Max ma I L I G = 1.2 I GT I - III Max II Max ma dv/dt (2) V D = 67 % V DRM gate open, T j = 125 C Min V/µs DS Rev 8 page 2/12

3 Characteristics Symbol Parameters Quadrant T1035 BTA10-xCW BTB10-xCW T1050 BTA10-xBW BTB10-xBW Unit (di/dt)c (2) Without snubber, T j = 125 C Min A/ms 1. Minimum I GT is guaranteed at 5 % of I GT max. 2. For both polarities of referenced to A1 Table 4. Electrical characteristics (T j = 25 C, unless otherwise specified) - standard Triac (4 quadrants) Symbol Parameters Quadrant C Value B Unit I GT (1) V D = 12 V, R L = 33 Ω I - II - III Max IV Max ma V GT All Max. 1.3 V V GD V D = V DRM, R L = 3,3 kω, T j = 125 C I - II - III Min. 0.2 V I H (2) I T = 500 ma I - II - III Max ma I L I G = 1.2 I GT I - III Max II Max ma dv/dt (2) V D = 67 % V DRM gate open, T j = 125 C Min V/µs (dv/dt)c (2) (di/dt)c = 4.4 A/ms, T j = 125 C Min V/µs 1. Minimum I GT is guaranteed at 5 % of I GT max. 2. For both polarities of referenced to A1 Table 5. Thermal resistance Symbol Parameters Value Unit R th(j-c) (typ.) R th(j-a) (max.) TO-220AB / D²PAK 1.5 Junction to case (AC) TO-220AB insulated 2.4 Junction to ambient (S (1) = 2 cm²) D²PAK 45 Junction to ambient TO-220AB / TO-220AB ins 60 C/W 1. Copper surface under tab. DS Rev 8 page 3/12

4 Characteristics (curves) 1.1 Characteristics (curves) Figure 2. Maximum power dissipation versus on-state RMS current (full cycle) Figure 3. RMS on-state current versus case temperature (full cycle) P(W) I T(RMS) (A) I T(RMS) (A) T c ( C) BTA BTB/T Figure 4. Relative variation of thermal impedance versus pulse duration 1E+0 K = [Z th /R th ] Zth(j-c) Figure 5. On-state characteristics (maximum values) 100 I TM (A) Tj max. Vto = 0.85 V Rd = 40 mω Tj = Tj max. 1E-1 Zth(j-a) 10 Tj = 25 C 1E-2 t p (s) 1 V TM (V) E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Figure 6. Surge peak on-state current versus number of cycles Figure 7. Non repetitive surge peak on-state current versus sinusoidal pulse width (t P < 10 ms) I TSM (A) I TSM(A) Repetitive T C=95 C Non repetitive Tj initial=25 C Number of cycles t=20ms One cycle di/dt limitation: 50A/µs Tj initial=25 C t p(ms) ITSM DS Rev 8 page 4/12

5 Characteristics (curves) Figure 8. Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) I GT,I H,I L [Tj] / I GT,I H,I L [Tj = 25 C] I H and I L I GT T j ( C) Figure 9. Relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values) (dl/dt)c [(dv/dt)c / specified (dl/dt)c B C BW/CW/T10xx 0.6 (dv/dt)c (V/µs) Figure 10. Relative variation of critical rate of decrease of main current versus junction temperature Figure 11. D²PAK thermal resistance junction to ambient versus copper surface under tab 6 5 (dl/dt)c [Tj] / (dl/dt)c [Tj = 125 C] R th(j-a) ( C/W) Epoxy printed board FR4, copper thickness = 35 µm D²PAK Tj( C) SCu(cm²) DS Rev 8 page 5/12

6 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. 2.1 D²PAK package information Figure 12. D²PAK package outline E c2 A E1 E2 H L3 D D1 L D2 b2 b e G Max resin gate protrusion: 0.5 mm (1) A1 A3 L R Gauge Plane (1) Resin gate is accepted in each of position shown on the drawing, or their symmetrical. V2 c Table 6. D²PAK package mechanical data Dimensions Ref. Millimeters Inches (1) Min. Typ. Max. Min. Typ. Max. A A A b b DS Rev 8 page 6/12

7 D²PAK package information Dimensions Ref. Millimeters Inches (1) Min. Typ. Max. Min. Typ. Max. c c D D D e E E E G H L L L R V Dimensions in inches are given for reference only Figure 13. D²PAK recommended footprint (dimensions are in mm) DS Rev 8 page 7/12

8 TO-220AB non ins. and insulated package information 2.2 TO-220AB non ins. and insulated package information Figure 14. TO-220AB non ins. and insulated package outline B C Resin gate 0.5 mm max. protusion (1) I L b2 F A I4 l3 a1 c2 l2 a2 e b1 Resin gate 0.5 mm max. protusion (1) (1)Resin gate position accepted in one of the two positions or in the symmetrical opposites. M c1 Table 7. TO-220AB non ins. and insulated package mechanical data Dimensions Ref. Millimeters Inches (1) Min. Typ. Max. Min. Typ. Max. A a a B b b C DS Rev 8 page 8/12

9 TO-220AB non ins. and insulated package information Dimensions Ref. Millimeters Inches (1) Min. Typ. Max. Min. Typ. Max. c c e F I L I I I M Inch dimensions are for reference only. DS Rev 8 page 9/12

10 Ordering information 3 Ordering information Figure 15. BTA10 and BTB10 series ordering information scheme BT A BW RG Triac Insulation A = Insulated B = Non-insulated Current 10 = 10 A Voltage 600 = 600 V 800 = 800 V Sensitivity and type B = 50 ma standard C = 25 ma standard Packing mode RG = Tube BW = 50 ma Snubberless CW = 35 ma Snubberless Figure 16. T10xx series ordering information scheme Triac Current 10 = 10 A Sensitivity 50 = 50 ma 35 = 35 ma Voltage 800 V 600 V Package G = D²PAK Packing mode (blank) = Tube -TR = Tape and reel T G - TR Table 8. Ordering information Order code Marking Package Weight Base qty. Delivery mode BTA10-600BRG BTA10-600B BTA10-600CRG BTA10-600C BTA10-600BWRG BTA10-600CWRG BTA10-800BWRG BTA10-800CWRG BTA10-600BW BTA10-600CW BTA10-800BW BTA10-800CW TO-220AB Ins. 2.3 g 50 Tube BTB10-600BWRG BTB10-800BWRG BTB10-600BW BTB10-800BW TO-220AB T1035-6G T1035-6G T1050-8G T1035-6G-TR T1050-8G-TR T1050-8G T1035-6G T1050-8G D²PAK 1.50 g 1000 Tape and reel 13" DS Rev 8 page 10/12

11 Revision history Table 9. Document revision history Date Revision Changes Sep A Last update. 13-Feb TO-220AB delivery mode changed from bulk to tube. ECOPACK statement added. 06-Feb Added D²PAK package information. 15-Mar Updated Table 3. Electrical characteristics (T j = 25 C, unless otherwise specified) - Snubberless (3 quadrants), Section 3 Ordering information and Section 2.1 D²PAK package information. Added RPNs T1035 and T1050. DS Rev 8 page 11/12

12 IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved DS Rev 8 page 12/12

T1610, T1635, T1650 BTA16, BTB16 Datasheet

T1610, T1635, T1650 BTA16, BTB16 Datasheet Snubberless, logic level and standard 16 A Triacs A2 Features Medium current Triac A2 G A1 Low thermal resistance with clip bonding Low thermal resistance insulation