Symbol Parameter Value Unit. F = 50 Hz t = 20 ms 8 F = 60 Hz t = 16.7 ms 8.5 I ² t I ² t Value for fusing t p = 10 ms 0.35 A ² s

Size: px

Start display at page:

Download "Symbol Parameter Value Unit. F = 50 Hz t = 20 ms 8 F = 60 Hz t = 16.7 ms 8.5 I ² t I ² t Value for fusing t p = 10 ms 0.35 A ² s"

Alison Tucker
5 years ago
Views:

1 Standard 1 A Triacs Main Features A2 Symbol Value Unit I T(RMS) 1 A V DRM /V RRM 600 to 800 V I GT (Q1 ) 3 to 25 ma Description The series is suitable for general purpose AC switching applications. They can be found in applications such as home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... Different gate current sensitivities are available, allowing optimized performances when controlled directly from microcontrollers. A1 TO-92 xxa Order Codes Part Number xxa xxn G A2 G A1 A2 A1 SOT-223 xxn Marking A2 G See Ordering information on page 7 Table 1. Absolute maximum ratings Symbol Parameter Value Unit I T(RMS) I TSM RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, T j initial = 25 C) SOT-223 TO-92 T tab = 90 C T L = 50 C F = 50 Hz t = 20 ms 8 F = 60 Hz t = 16.7 ms A I ² t I ² t Value for fusing t p = 10 ms 0.35 A ² s di/dt Critical rate of rise of on-state current I G = 2 x I GT, t r 100 ns F = 120 Hz T j = 125 C 20 A/µs I GM Peak gate current t p = 20 µs T j = 125 C 1 A P G(AV) Average gate power dissipation T j = 125 C 1 W T stg T j Storage junction temperature range Operating junction temperature range - 40 to to A C April 2006 Rev 7 1/8 8

2 Characteristcs 1 Characteristcs Table 2. Electrical characteristics (T j = 25 C, unless otherwise specified) Symbol Test Conditions Quadrant Unit I GT (1) V D = 12 V R L = 30 Ω 1. minimum I GT is guaranteed at 5% of I GT max. I - II - III MAX IV V GT ALL MAX 1.3 V V GD V D = V DRM R L = 3.3 kω T j = 125 C ALL MIN 0.2 V I H (2) I T = 50 ma MX ma I - III - IV I L I G = 1.2 I GT MAX II ma dv/dt (2) V D = 67% V DRM gate open T j = 110 C MIN V/µs (dv/dt)c (2) (dv/dt)c = 0.44 A/ms T j = 110 C MIN V/µs 2. for both polarities of A2 referenced to A1. Table 3. Static characteristics Symbol Test Conditions Value Unit V TM (1) V to (1) I TM = 1.4 A t p = 380 µs T j = 25 C MAX V Threshold voltage T j = 125 C MAX V R (1) d Dynamic resistance T j = 125 C MAX. 400 mω I DRM T j = 25 C 5 µa V I DRM = V RRM MAX. RRM T j = 125 C 0.5 ma 1. for both polarities of A2 referenced to A1. Table 4. Thermal resistances Symbol Parameter Value Unit ma R th(j-t) Junction to tab (AC) SOT R th(j-i) Junction to lead (AC) TO S (1) = 5 cm ² R th(j-a) Junction to ambient SOT TO C/W C/W 1. S = Copper surface under tab. 2/8

3 Characteristcs Figure 1. Maximum power dissipation versus RMS on-state current (full cycle) Figure 2. RMS on-state current versus ambient temperature (full cycle) P(W) 1.2 I T(RMS) (A) R th(j-a) = Rth(j-t) (SOT-223) R th(j-a) = Rth(j-l) (TO-92) I T(RMS) (A) T amb ( C) Figure 3. RMS on-state current versus ambient temperature (full cycle) Figure 4. Relative variation of thermal impedance versus pulse duration 1.2 I T(RMS) (A) 0 K=[Z th(j-a) /Rth(j-a)] 0.8 R th(j-a) = 60 C/W (SOT-223) xxa xxn R th(j-a) = 150 C/W (TO-92) T amb ( C) t p(s) E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Figure 5. Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) Figure 6. Surge peak on-state current versus number of cycles I GT,I H,I L [T] j / I GT, I H, I L [T j=25 C] IH &IL IGT T j ( C) I TSM (A) Repetitive T amb = 25 C Non repetitive Tj initial = 25 C One cycle 1 Number of cycles t=20ms 3/8

4 Characteristcs Figure 7. Non-repetitive surge peak on-state current for a sinusoidal pulse with width t p < 10 ms and corresponding value of I 2 t Figure 8. On-state characteristics (maximum values) I TSM (A), I2t (A2s) Tj initial = 25 C 10.0 I TM(A) di/dt limitation: 20A/µs ITSM 10.0 T j = Tjmax. It 2 T j = 25 C T j=max. V t0=0.95 V R d=400 mω t p (ms) V TM (V) Figure 9. Relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values) Figure 10. Relative variation of critical rate of decrease of main current versus junction temperature (di/dt)c [(dv/dt)c] / Specified (di/dt)c (dv/dt)c (V/µs) (di/dt)c [T j ] / (di/dt)c [T j Specified] T j ( C) Figure 11. SOT-223 Thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35 µm) R th(j-a) ( C/W) S(cm²) /8

5 Ordering information scheme 2 Ordering information scheme Z M A [BLANK] 1AA2 Triac series Current 01 = 1A Sensitivity 03 = 3mA 07 = 5mA 09 = 10mA 10 = 25mA Voltage M = 600V S = 700V N = 800V Package A = TO-92 N = SOT-223 Packing mode 1AA2 = TO-92 Bulk (preferred) 2AL2 = TO-92 Ammopack 5AL2 = TO-92 Tape & reel 5AA4 = SOT-223 Tape & reel Table 5. Product Selector Voltage Part Number Sensitivity Type Package 600 V 700 V 800 V 03MA X 3 ma Standard TO-92 03MN X 3 ma Standard SOT SA X 3 ma Standard TO-92 03SN X 3 ma Standard SOT NA X 3 ma Standard TO-92 03NN X 3 ma Standard SOT MA X 5 ma Standard TO-92 07MN X 5 ma Standard SOT SA X 5 ma Standard TO-92 07SN X 5 ma Standard SOT NA X 5 ma Standard TO-92 07NN X 5 ma Standard SOT MA X 10 ma Standard TO-92 09MN X 10 ma Standard SOT SA X 10 ma Standard TO-92 09SN X 10 ma Standard SOT NA X 10 ma Standard TO-92 09NN X 10 ma Standard SOT MA X 25 ma Standard TO-92 10MN X 25 ma Standard SOT SA X 25 ma Standard TO-92 10SN X 25 ma Standard SOT NA X 25 ma Standard TO-92 10NN X 25 ma Standard SOT-223 5/8

6 Packaging information 3 Packaging information Table 6. SOT-223 Dimensions REF. Millimeters Dimensions Inches A V c Min. Typ. Max. Min. Typ. Max. A1 B A e1 A D B1 B B H E c D e e e E H V 10 max Figure 12. SOT-223 Footprint dimensions (in millimeters) /8

7 Ordering information Table 7. TO-92 Dimensions DIMENSIONS REF. Millimeters Inches A a Min. Typ. Max. Min. Typ. Max. A B C B C F D E D E F a Ordering information Ordering type (1) Marking (1) Package Weight Base quantity Delivery mode xxya 1AA2 xxya TO g 2500 Bulk xxya 2AL2 xxya TO g 2000 Ammopack xxya 5AL2 xxya TO g 2000 Tape and reel 03yN 5AA4 Z3y SOT g 1000 Tape and reel 07yN 5AA4 Z7y SOT g 1000 Tape and reel 09yN 5AA4 Z9y SOT g 1000 Tape and reel 1. xx = sensitivity, y = voltage 5 Revision History Date Revision Description of Changes Oct Last update. 10-Feb Package: TO-92 tape and reel delivery mode 5AL2 added. 09-May Apr Table 4 on page 2: typo. mistake corrected 1. (dv/dt)c instead of (di/dt)c 2. V/µs unit instead of A/ms Reformatted to current standard. Table 2 on page 2: Typo corrected. Values for I GT split into two separate rows. 7/8

8 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 8/8

Z Standard 0.8 A Triacs. Description. Features

Z Standard 0.8 A Triacs. Description. Features Standard 0.8 A Triacs Datasheet - production data A2 Description G A1 The Z00607 is suitable for low power AC switching applications. Typical applications include home appliances (electrovalve, pump, door