BTA08, BTB08 T810, T835

Size: px

Start display at page:

Download "BTA08, BTB08 T810, T835"

Archibald Caldwell
5 years ago
Views:

1 BTA08, BTB08 T810, T835 Snubberless, logic level and standard 8 A Triacs Features On-state rms current, I T(RMS) 8 A Repetitive peak off-state voltage, V DRM /V RRM 600 to 800 V Triggering gate current, I T (Q1) 5 to 50 ma Description Available either in through-hole or surface-mount packages, the BTA08, BTB08 and T8 triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits... or for phase control operation in light dimmers, motor speed controllers,... The snubberless versions (BTA/BTB...W and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performances. D PAK (T8-) DPAK (T8-B) IPAK (T8-H) Logic level versions are designed to interface directly with low power drivers such as microcontrollers. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 500 V RMS ) complying with UL standards (file ref.: E81734). TO-0AB Insulated (BTA08) TO-0AB (BTB08) March 010 Doc ID 747 Rev 7 1/1 1

2 Characteristics BTA08, BTB08 and T8 Series 1 Characteristics Table 1. Absolute maximum ratings Symbol Parameter Value Unit I T(RMS) I TSM On-state rms current (full sine wave) Non repetitive surge peak on-state current (full cycle, T j initial = 5 C) IPAK/D PAK/DPAK/ TO-0AB T c = 110 C TO-0AB Ins. T c = 100 C F = 50 Hz t = 0 ms 80 F = 60 Hz t = 16.7 ms 84 8 A I ² t I ² t value for fusing t p = 10 ms 36 A ² s di/dt Critical rate of rise of on-state current I = x I T, t r 100 ns F = 10 Hz T j = 15 C 50 A/µs I M Peak gate current t p = 0 µs T j = 15 C 4 A P (AV) Average gate power dissipation T j = 15 C 1 W T stg T j Storage junction temperature range Operating junction temperature range - 40 to to + 15 A C Table. Electrical characteristics (T j = 5 C, unless otherwise specified) Snubberless and logic level (3 quadrants) Symbol Test conditions Quadrant T8 BTA08 / BTB08 T810 T835 TW SW CW BW Unit I (1) T I - II - III MAX ma V D = 1 V R L = 30 Ω V T I - II - III MAX. 1.3 V V V D = V DRM R L = 3.3 kω D I - II - III MIN. 0. V T j = 15 C I () H I T = 100 ma MAX ma I - III I L I = 1. I T MAX. ma II dv/dt () V D = 67 %V DRM gate open MIN V/µs T j = 15 C (di/dt)c () (dv/dt)c = 0.1 V/µs T j = 15 C (dv/dt)c = 10 V/µs T j = 15 C MIN Without snubber T j = 15 C A/ms /1 Doc ID 747 Rev 7

3 BTA08, BTB08 and T8 Series Characteristics Table 3. Standard (4 quadrants) Symbol Test conditions Quadrant BTA08 / BTB08 C B Unit I (1) I - II - III 5 50 T MAX. ma V D = 1 V, R L = 33 Ω IV V T ALL MAX. 1.3 V V D V D = V DRM, R L = 3.3 kω, T j = 15 C ALL MIN. 0. V I () H I T = 500 ma MAX ma I - III - IV I L I = 1. I T MAX. ma II dv/dt () V D = 67 %V DRM gate open T j = 15 C MIN V/µs (dv/dt)c () (di/dt)c = 5.3 A/ms T j = 15 C MIN V/µs Table 4. Static characteristics Symbol Test conditions Value Unit V (1) TM I TM = 11 A, t p = 380 µs T j = 5 C MAX V V () t0 Threshold voltage T j = 15 C MAX V R () d Dynamic resistance T j = 15 C MAX. 50 mω I DRM T j = 5 C 5 µa V I DRM = V RRM MAX. RRM T j = 15 C 1 ma 1. minimum I T is guaranted at 5% of I T max.. for both polarities of referenced to. Table 5. Thermal resistance Symbol Parameter Value Unit R th(j-c) Junction to case (AC) IPAK / D PAK / DPAK / TO-0AB 1.6 TO-0AB Insulated.5 C/W S = 1 cm ² D PAK 45 R th(j-a) Junction to ambient S = 0.5 cm ² DPAK 70 TO-0AB / TO-0AB Insulated 60 C/W IPAK 100 S = Copper surface under tab. Doc ID 747 Rev 7 3/1

4 Characteristics BTA08, BTB08 and T8 Series Figure 1. Maximum power dissipation versus rms on-state current (full cycle) Figure. On-state rms current versus case temperature (full cycle) P(W) I T(RMS) (A) I T(RMS) (A) T ( C) C BTA BTB / T8 Figure 3. On-state rms current versus ambient temperature (full cycle) Figure 4. Relative variation of thermal impedance versus pulse duration I T(RMS) (A) DPAK (S=1CM ) printed circuit board FR4, copper thickness: 35 µm 1E+0 K=[Z th/rth] Zth(j-c) DPAK/IPAK Zth(j-a).5.0 1E-1 TO-0AB/DPAK Zth(j-a) DPAK (S=0.5CM ) 1E T ( C) C t (s) p 1E-3 1E-3 1E- 1E-1 1E+0 1E+1 1E+ 5E+ Figure 5. On-state characteristics (maximum values) Figure 6. Surge peak on-state current versus number of cycles I TM(A) Tj max. V to = 0.85V R d = 50 mω T= j Tj max. T j = 5 C. V TM (V) I TSM(A) Repetitive T C=110 C Non repetitive Tj initial=5 C Number of cycles t=0ms One cycle /1 Doc ID 747 Rev 7

5 BTA08, BTB08 and T8 Series Characteristics Figure 7. Non-repetitive surge peak on-state current for a sinusoidal Figure 8. Relative variation of gate trigger current 1000 I TSM(A), I t (A s) Tj initial=5 C.5.0 I T,I H,I L[T] j / I T,I H,I L[T j=5 C] holding current and latching current versus junction temperature (typical values) 100 di/dt limitation: 50A/µs α 360 pulse with width t p < 10 ms and corresponding value of I t t p(ms) ITSM I t IH & IL IT T j( C) Figure 9. Relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values) Figure 10. Relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values) (di/dt)c [(dv/dt)c] / Specified (di/dt)c..0 Snubberless and Logic level types TW T835/CW/BW T810/SW (dv/dt)c (V/µs) (di/dt)c [(dv/dt)c] / Specified (di/dt)c.0 Standard types C B (dv/dt)c (V/µs) Figure 11. Relative variation of critical rate of decrease of main current versus junction temperature Figure 1. DPAK and D PAK thermal resistance junction to ambient versus copper surface under tab (di/dt)c [T j ] / (di/dt)c [T j specified] T j( C) R th(j-a) ( C/W) DPAK DPAK printed circuit board FR4, copper thickness: 35 µm S(cm²) Doc ID 747 Rev 7 5/1

6 Package information BTA08, BTB08 and T8 Series Package information Epoxy meets UL94, V0 Lead-free packages In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. Table 6. D PAK dimensions Ref. Millimeters Dimensions Inches Min. Typ. Max. Min. Typ. Max. A L E C A B L D B L3 B B C R C C D E mm min. FLAT ZONE L V L L R V Figure 13. Footprint (dimensions in mm) /1 Doc ID 747 Rev 7

7 BTA08, BTB08 and T8 Series Package information Table 7. DPAK dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A E A B C L B H R D B C L4 B C R C D E MIN H V L 0.80 typ typ. L V Figure 14. Footprint (dimensions in mm) Doc ID 747 Rev 7 7/1

8 Package information BTA08, BTB08 and T8 Series Table 8. IPAK dimensions Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A B E C B B L B B D C H L L1 B3 B V1 C D E e B5 C A3 e H L L L V /1 Doc ID 747 Rev 7

9 BTA08, BTB08 and T8 Series Package information TO-0AB (NIns. and Ins. 0-up) dimensions Ref. Millimeters Dimensions Inches Min. Typ. Max. Min. Typ. Max. A a B Ø I L b C F a B b A b I4 l3 l a1 a c C c c e e b1 M c1 F ØI I L l l M Doc ID 747 Rev 7 9/1

10 Ordering information BTA08, BTB08 and T8 Series 3 Ordering information Figure 15. Ordering information scheme (BTA08 and BTB08 series) BT A BW (R) Triac series Insulation A = insulated B = non insulated Current 08 = 8A Voltage 600 = 600V 800 = 800V Sensitivity and type B = 50mA Standard C = 5mA Standard SW = 10mA Logic Level Packing mode R = Tube BW = 50mA Snubberless CW = 35mA Snubberless TW = 5mA Logic Level Figure 16. Ordering information scheme (T8 series) T B (-TR) Triac series Current 8 = 8A Sensitivity 10 = 10 ma 35 = 35 ma Voltage 600 = 600 V 800 = 800 V Package B = DPAK H = IPAK = D PAK R = I PAK Packing mode Blanck = Tube -TR = Tape and reel Table 9. Product Selector Voltage (xxx) Part Number Sensitivity Type Package 600 V 800 V BTA/BTB08-xxxB X X 50 ma Standard TO-0AB BTA/BTB08-xxxBW X X 50 ma Snubberless TO-0AB BTA/BTB08-xxxC X X 5 ma Standard TO-0AB BTA/BTB08-xxxCW X X 35 ma Snubberless TO-0AB BTA/BTB08-xxxSW X X 10 ma Logic level TO-0AB BTA/BTB08-xxxTW X X 5 ma Logic Level TO-0AB T810-xxx X X 10 ma Logic Level D PAK T810-xxxH X X 10 ma Logic Level IPAK T835-xxxB X X 35 ma Snubberless DPAK T835-xxx X X 35 ma Snubberless D PAK T835-xxxH X X 35 ma Snubberless IPAK BTB: non insulated TO-0AB package 10/1 Doc ID 747 Rev 7

11 BTA08, BTB08 and T8 Series Ordering information 4 Ordering information Table 10. Ordering information Order code Marking Package Weight Base qty Delivery mode BTA/BTB08-xxxyzR BTA/BTB08-xxxyz TO-0AB.3 g 50 Tube T8yy-xxx T8yyxx 50 Tube D PAK 1.5 g T8yy-xxx-TR T8yyxx 1000 Tape and reel T8yy-xxxB T8yyxx 75 Tube DPAK 0.3 g T8yy-xxxB-TR T8yyxx 500 Tape and reel T8yy-xxxH T8yyxx IPAK 0.4 g 75 Tube xxx = voltage, yy = sensitivity, z = type 5 Revision history Table 11. Document revision history Date Revision Changes Apr-00 5A Last update. 13-Feb TO-0AB delivery mode changed from bulk to tube. ECOPACK statement added. 10-Mar Updated ECOPACK statement and Figure 16. Doc ID 747 Rev 7 11/1

12 BTA08, BTB08 and T8 Series Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDIN WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINEMENT OF ANY PATENT, COPYRIHT OR OTHER INTELLECTUAL PROPERTY RIHT. UNLESS EXPRESSLY APPROVED IN WRITIN BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVIN, OR LIFE SUSTAININ APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE RADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. 010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - ermany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 1/1 Doc ID 747 Rev 7

BTA24, BTB24, BTA25, BTA26 and T25 series

BTA24, BTB24, BTA25, BTA26 and T25 series BT4, BTB24, BT5, BT6 and T25 series Snuberrless and Standard 25 A Triacs Main features Symbol Value Unit I T(RMS) 25 A V DRM /V RRM 600 and 800 V I T (Q1 ) 35 to 50 ma Description Available either in through-hole