Teccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description

Size: px

Start display at page:

Download "Teccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description"

Dwayne Ross
6 years ago
Views:

Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation

1 Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Standard type devices normally operate in Quadrants I & III triggered from C line. Features & Benefits gency pproval gency gency File Number L Package: E71639 Main Features Symbol Value Unit RoHS Compliant Glass passivated junctions Voltage capability up to 1000 V Surge capability up to 120 Electrically isolated package L - Package and UL Recognized for 2500Vrms Solid-state switching eliminates arcing or contact bounce that create voltage transients No contacts to wear out from reaction of switching events Restricted (or limited) RFI generation, depending on activation point sine wave I T(RMS) 10 RM /V RRM 400 to 1000 V (Q1) 25 to 50 m Schematic Symbol pplications lternistor type devices are used in applications requiring high commutation performance such as controlling inductive loads. Isolated packages are offered with internal construction, having the case or mounting tab electrically isolated from the semiconductor chip. dditional Information G Datasheet Resources Samples

2 bsolute Maximum Ratings Standard Triac Symbol Parameter Value Unit I T(RMS) I TSM RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, initial = 25 C) Qxx10Ry/ Qxx10Ny T C = 95 C Qxx10Ly T C = 90 C f = 50 Hz t = 20 ms 100 f = 60 Hz t = 16.7 ms I 2 t I 2 t Value for fusing t p = 8.3 ms 60 2 s di/dt M Critical rate of rise of on-state current I G = 200m with 0.1μs rise time Peak gate trigger current f = 120 Hz = 125 C 70 /μs t p 10 μs M = 125 C 1.8 P G(V) verage gate power dissipation = 125 C 0.5 W T stg Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C bsolute Maximum Ratings lternistor Triac (3 Quadrants) Symbol Parameter Value Unit I T(RMS) I TSM RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, initial = 25 C) Qxx10LHy T C = 90 C Qxx10RHy/ Qxx10NHy T C = 95 C f = 50 Hz t = 20 ms 110 f = 60 Hz t = 16.7 ms I 2 t I 2 t Value for fusing t p = 8.3 ms 60 2 s di/dt Critical rate of rise of on-state current f = 120 Hz = 125 C 70 /μs M Peak gate trigger current t p 10 μs M = 125 C 2.0 P G(V) verage gate power dissipation = 125 C 0.5 W T stg Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C Electrical Characteristics ( = 25 C, unless otherwise specified) Standard Triac Symbol Test Conditions Quadrant Qxx10x4 Qxx10x5 Unit = 12V R L = 60 Ω I II III IV MX (TYP) V GT = 12V R L = 60 Ω I II III MX. 1.3 V V GD = RM R L = 3.3 kω = 125 C LL MIN. 0.2 V I H I T = 200m MX m m dv/dt 400V = RM Gate Open = 125 C 600V MIN. 800V = RM Gate Open = 100 C 1000V V/μs (dv/dt)c (di/dt)c = 5.4 /ms = 125 C TYP. 2 4 V/μs t gt I G = 2 x IGT PW = 15µs I T = 14.1 (pk) TYP μs Note: xx = voltage, x = package, y = sensitivity

3 Electrical Characteristics ( = 25 C, unless otherwise specified) lternistor Triac (3 Quadrants) Symbol Test Conditions Quadrant Value Unit = 12V R L = 60 Ω I II III MX. 50 m V GT = 12V R L = 60 Ω I II III MX. 1.3 V V GD = RM R L = 3.3 kω = 125 C I II III MIN. 0.2 V I H I T = 100m MX. 50 m dv/dt 400V 750 = RM Gate Open = 125 C 600V 650 MIN. 800V 500 = RM Gate Open = 100 C 1000V 300 V/μs (dv/dt)c (di/dt)c = 5.4 /ms = 125 C TYP. 30 V/μs t gt I G = 2 x IGT PW = 15µs I T = 14.1 (pk) TYP. 4.0 μs Static Characteristics Symbol Test Conditions Value Unit V TM I TM = 14.1 t p = 380 µs MX V = 25 C V 10 μ I DRM I RRM RM = V RRM = 125 C V MX. 2 = 100 C 1000V 3 m Thermal Resistances R θ(j-c) Symbol Parameter Value Unit Qxx10Ryy/ 1.3 Junction to case (C) Qxx10Nyy C/W Qxx10Lyy 2.6 R θ(j-) Junction to ambient (C) Qxx10Ryy 45 Qxx10Lyy 50 C/W Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity

4 Figure 1: Definition of Quadrants Figure 2: Normalized DC Gate Trigger Current for ll Quadrants vs. Junction Temperature LL POLRITIES RE REFERENCED TO POSITIVE (Positive Half Cycle) (-) (-) REF QII QIII QI QIV (+) (+) REF + Ratio of / ( = 25ºC) REF - NEGTIVE (Negative Half Cycle) REF Junction Temperature ( ) - ºC +125 Note: lternistors will not operate in QIV Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: Normalized DC Gate Trigger Voltage for ll Quadrants vs. Junction Temperature Ratio of I H / I H ( = 25ºC) Ratio of V GT / V GT ( = 25ºC) Junction Temperature ( ) - ºC Junction Temperature ( ) - ºC Figure 5: Power Dissipation (Typical) vs. RMS On-State Current Figure 6: Maximum llowable Case Temperature vs. On-State Current verage On-State Power Dissipation [P D (V) ] - Watts CURRENT WVEFORM: Sinusoidal LOD: Resistive or Inductive CONDUCTION NGLE: 360 o Max llowable Case Temperature (T C ) - C Qxx10Ryy Qxx10Nyy Qxx10Lyy RMS On-State Current [I T(RMS) ] - MPS RMS On-State Current [I T(RMS) ] - MPS

5 Figure 7: Maximum llowable mbient Temperature vs. On-State Current Figure 8: On-State Current vs. On-State Voltage (Typical) Max llowable mbient Temperature (T ) - ºC Qxx10Ly Qxx10Ry CURRENT WVEFORM: Sinusoidal LOD: Resistive or Inductive CONDUCTION NGLE: 360º FREE IR RTING - NO HETSINK Qxx10LHy Qxx10RHy RMS On-State Current [I T(RMS) ] - MPS Positive or Negative Instantaneous On-State Current (I T ) - MPS T C = 25 ºC Positive or Negative Instantaneous On-State Voltage (V T ) - Volts Figure 9: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-Repetitive) On-State Current (I TSM ) - MPS Surge Current Duration - Full Cycles 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOD: Resistive RMS On-State Current: [I T(RMS) ]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value.

6 Temperature Teccor brand Thyristors Soldering Parameters Reflow Condition Pb Free assembly T P t P - Temperature Min (T s(min) ) 150 C Ramp-up Pre Heat - Temperature Max (T s(max) ) 200 C - Time (min to max) (t s ) secs verage ramp up rate (Liquidus Temp) (T L ) to peak 5 C/second max T L T S(max) T S(min) Preheat t L Ramp-down T S(max) to T L - Ramp-up Rate 5 C/second max t S - Temperature (T L ) (Liquidus) 217 C Reflow - Temperature (t L ) seconds Peak Temperature (T P ) /-5 C 25 time to peak temperature Time Time within 5 C of actual peak Temperature (t p ) seconds Ramp-down Rate 5 C/second max Time 25 C to peak Temperature (T P ) 8 minutes Max. Do not exceed 280 C Physical Specifications Environmental Specifications Terminal Finish Body Material Terminal Material Design Considerations 100% Matte Tin-plated UL recognized epoxy meeting flammabilty classification 94V-0. Copper lloy Careful selection of the correct device for the application s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Test C Blocking Temperature Cycling Temperature/ Humidity High Temp Storage Low-Temp Storage Resistance to Solder Heat Solderability Lead Bend Specifications and Conditions MIL-STD-750, M-1040, Cond pplied Peak C 125 C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40 C to +150 C, 15-min dwell-time EI/JEDEC, JESD hours; 320V - DC: 85 C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150 C 1008 hours; -40 C MIL-STD-750 Method 2031 NSI/J-STD-002, category 3 Test MIL-STD-750, M-2036 Cond E

7 Dimensions TO-220B (R-Package) Non-Isolated Mounting Tab Common with Center Lead Ø E T C MESURING POINT O P Dimension Inches Millimeters Min Max Min Max B C D RE (REF.) 0.17 in B C D G F L H R NOTCH IN LED TO ID. NON-ISOLTED TB E F G K J N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). H J K L M N O P R Dimensions TO-220B (L-Package) Isolated Mounting Tab Ø E T C MESURING POINT O P Dimension Inches Millimeters Min Max Min Max B C D RE (REF.) 0.17 in B C D F E G L H R F G H K J N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). J K L M N O P R

8 Dimensions TO-263B (N-Package) D 2 -PK Surface Mount B T C MESURING POINT V C E RE: 0.11 IN 2 Dimension Inches Millimeters Min Max Min Max B S C W G D F K H U J D E F G H J K S V U W Product Selector Part Number Voltage (xx) Gate Sensitivity Quadrants 400V 600V 800V 1000V I II III IV Type Package Qxx10L4 X X X X 25 m 50 m Standard Triac TO-220L Qxx10R4 X X X X 25 m 50 m Standard Triac TO-220R Qxx10N4 X X X X 25 m 50 m Standard Triac TO-263 D²-PK Qxx10L5 X X X X 50 m Standard Triac TO-220L Qxx10R5 X X X X 50 m TYP. 75 m Standard Triac TO-220R Qxx10N5 X X X X 50 m TYP. 75 m Standard Triac TO-263 D²-PK Qxx10LH5 X X X X 50 m TYP. 75 m lternistor Triac TO-220L Qxx10RH5 X X X X 50 m lternistor Triac TO-220R Qxx10NH5 X X X X 50 m lternistor Triac TO-263 D²-PK Packing Options Part Number Marking Weight Packing Mode Base Quantity Qxx10L/RyyTP Qxx10L/Ryy 2.2 g Tube Pack 500 (50 per tube) Qxx10NyyTP Qxx10Nyy 1.6 g Tube 500 (50 per tube) Qxx10NyyRP Qxx10Nyy 1.6 g Embossed Carrier 500 Note: xx = voltage, yy = type & sensitivity

9 Teccor brand Thyristors TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EI Standards 0.63 (16.0) (4.0) DI (1.5) Gate (24.0) (21.0) * * Cover tape (13.0) rbor Hole Dia (330.0) Dimensions are in inches (and millimeters) (25.7) Direction of Feed Part Numbering System Part Marking System DEVICE TYPE Q: Triac or lternistor Q L H5 56 LED FORM DIMENSIONS xx: Lead Form Option TO-220 B - (L and R Package) TO-263 B - (N Package) VOLTGE RTING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RTING 10: 10 SENSITIVITY Standard Triac: 4: 25 m (QI, II, III) 50 m (QIV) 5: 50 m (QI, II, III) lternistor Triac: H5: 50m (QI, II, III) Q6010R5 YM PCKGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D 2 Pak) Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code

Teccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs

Teccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation