P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
|
|
- Caroline Gardner
- 6 years ago
- Views:
Transcription
1 P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation at T A =25ºC by 1/µs Waveform (Fig.2(Note 1, (Note 2 Power Dissipation on Infinite Heat Sink at T L =5 O C Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3 Instantaneous Forward Voltage at 25A for Unidirectional Only 4 W P D 3.3 W I FSM 6 A V F 3.5 V Operating Temperature Range T J -65 to 15 C Storage Temperature Range T STG -65 to 175 C Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient R θjl 3 C/W R θja 12 C/W Notes: 1. Non-repetitive current pulse, per Fig.4 and derated above T J (initial =25ºC per Fig Mounted on 5.x5.mm copper pad to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only. Excellent clamping capability For surface mounted applications to optimize board space Low profile package Typical failure mode is short from over-specified voltage or current Whisker test is conducted based on JEDEC JESD21A per its table 4a and 4c IEC ESD 3kV(Air, 3kV (Contact ESD protection of data lines in accordance with IEC EFT protection of data lines in accordance with IEC Built-in strain relief 4W peak pulse power capability at 1/µs waveform, repetition rate (duty cycles:.1% Low incremental surge resistance Fast response time: typically less than 1.ps from V to BV min High temperature to reflow soldering guaranteed: 26 T J C x (1+αT x (T J - 25 (αt:temperature Coefficient, typical value is.1% EPI silicon technology Meet MSL level1, per J-STD-2C, LF maximun peak of 26 C Matte tin lead free Plated Halogen-free and RoHS compliant Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(sn (IPC/JEDEC J-STD- 69A.1 Functional Diagram Bi-directional Applications Cathode Anode TVS devices are ideal for the protection of I/O Interfaces, V CC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.
2 Electrical Characteristics (T A =25 C unless otherwise noted Part Number (Uni Marking I-V Curve Characteristics Reverse Stand off Voltage V R (Volts Breakdown Voltage I T MIN MAX Test Current I T (ma Clamping Voltage V I pp (V Peak Pulse Current I pp (A Reverse Leakage I V R (µa P4SMA35A-E 35S P4SMA4A-E 4S P4SMA44A-E 44S P4SMA48A-E* 48S P4SMA51A-E* 51S P4SMA53A-E* 53S P4SMA54A-E* 54S P4SMA55A-E* 55S P4SMA6A-E* 6S P4SMA65A-E* 65S P4SMA7A-E* 7S P4SMA8A-E* 8S P4SMA9A-E* 9S P4SMAA-E* S Note: for parts with * are still under development Vc VBR VR IR IT VF V Ipp Peak Pulse Power Dissipation -- Max power dissipation V R Stand-off Voltage -- voltage that can be applied to the TVS without operation Breakdown Voltage -- voltage that flows though the TVS at a specified test current (I T V C Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current I R V F Reverse Leakage Current -- Current measured at V R Forward Voltage Drop for
3 Ratings and Characteristic Curves (T A =25 C unless otherwise noted Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS -Peak Pulse Power (kw TJ initial = Tamb t d -Pulse Width (ms Time Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform Peak Pulse Power (P PP or Current (I PP Derating in Percentage % T J - Initial Junction Temperature (ºC I PPM - Peak Pulse Current, % I RSM 15 5 td tr=1µsec Peak Value IPPM Half Value IPPM 2 IPPM ( TJ=25 C Pulse Width(td is defined as the point where the peak current decays to 5% of IPPM 1/µsec. Waveform as defined by R.E.A t-time (ms Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance. Cj (pf Reverse Breakdown Voltage (V Transient Thermal Impedance ( C/W T -Pulse Duration (s P
4 Temperature (T TVS Diodes Figure 7 - Non-Repetitive Forward Surge Current Uni-Directional Only 7 Figure 8 - Peak Forward Voltage Drop vs Peak Forward Current (Typical Values. IFSM - Peak Forward Surve Current (A IF-Peak Forward Current (A Number of Cycles at 6 Hz VF-Peak Forward Voltage(V Soldering Parameters Reflow Condition Lead free assembly t p Pre Heat - Temperature Min (T s(min 15 C - Temperature Max (T s(max 2 C T P T L Ramp-up t L Critical Zone T L to T P - Time (min to max (t s 6 18 secs T s(max Average ramp up rate (Liquidus Temp (T A to peak T S(max to T A - Ramp-up Rate 3 C/second max 3 C/second max T s(min t s Preheat Ramp-down Reflow - Temperature (T A (Liquidus 217 C - Time (min to max (t s 6 15 seconds 25 C t 25 C to Peak Time (t Peak Temperature (T P 26 +/-5 C Time within 5 C of actual peak Temperature (t p 2 4 seconds Ramp-down Rate Time 25 C to peak Temperature (T P 6 C/second max 8 minutes Max. Environmental Specifications Do not exceed 26 C High Temp. Storage JESD22-A13 Physical Specifications HTRB JESD22-A18 Weight Case.2 ounce,.61 gram JEDEC DO-214AC. Molded plastic body over glass passivated junction Temperature Cycling JESD22-A14 MSL JEDEC-J-STD-2, Level 1 Polarity Color band denotes positive end (cathode except bidirectional H3TRB JESD22-A11 Terminal Matte Tin-plated leads, Solderable per JESD22-B12 RSH JESD22-A111
5 Dimensions DO-214AC (SMA Cathode Band (for products only Dimensions Inches Millimeters Min Max Min Max A C A B C D B H D E F G E J F G K L H I J K I L Solder Pads (all dimensions in mm Part Numbering System Part Marking System P4SMA XXX A-E EPI SILICON TECHNOLOGY 5% VOLTAGE TOLERANCE F Cathode Band (for products only Littelfuse Logo SERIES VOLTAGE XX YMXXX Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Part number Component Package Quantity Option Specification P4SMAxxxA-E DO-214AC 5 Tape & Reel - 12mm tape/13 reel EIA STD RS-481 Tape and Reel Specification.47 ( (4. Cathode.157 (4..59 DIA (1.5 Cover tape.8 (2.2 Arbor Hole Dia. 13. (33 Dimensions are in inches (and millimeters..49 (12.5 Direction of Feed
P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information5.0SMDJxxS Series, Single Chip Design
5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More information1KSMB Series. Transient Voltage Suppression Diodes. Surface Mount 1000W > 1KSMB series. Uni-directional. Description
Surface Mount W > KSMB series KSMB Series RoHS Pb e3 Uni-directional Description Bi-directional The KSMB series is designed specifically to protect sensitive electronic equipment from voltage transients
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More informationSMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTPSMD Series. TVS Diodes Surface Mount 3000W > TPSMD series. Description
TPSMD Series RoHS Pb e3 Description Bi-directional The TPSMD series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationTPSMC-VR Series. TVS Diodes Surface Mount 1500W > TPSMC-VR series Series. Description. Uni-directional. Bi-directional
TPSMC-VR Series Description RoHS Pb e3 The TPSMC-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationSMBJ-HRA Series. Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HRA Series. Description. Uni-directional
SMBJ-HRA Series RoHS Pb e3 Uni-directional Bi-directional Description The SMBJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series
Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series
SMCG-HR Series RoHS Pb e3 Description The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR series. Bi-directional. Features V BR 3000 W 6.5 W 300 A 3.5 V.
RoHS Uni-directional Description Bi-directional The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTransient Voltage Suppressors. SMBJ Series. Circuit Protection System
Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series
Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak
More informationSMDJ-HR Series. Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR Series. Description. Uni-directional
SMDJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationTransient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series
Surface Mount 4W > SMAJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation
More informationSMCG-HRA Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HRA series
SMCG-HRA Series RoHS Pb e3 Description The SMCG-HRA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationZener Diode Surface Mount - 1W - SMF47xxA LF RoHS
SMF47xxA Description SMF47xxA Series Zener Diodes are excellent voltage stabilization devices. The Series is designed specifically for Voltage stabilization Voltage regulation, and so on. Zener Diode LF
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More informationTransient Voltage Suppressors. SMAJ Series. Circuit Protection System
Transient Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA above 10V Compatible
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationSMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional
SMCJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More informationSMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationS M A J x x x C A. Reverse Stand-Off Voltage
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Fast response time
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationSurface Mount Transient Voltage Suppressors
TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems.
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationTransient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HRA Series. Description. Features = V J V BR
SMDJ-HRA Series RoHS Pb e3 Uni-directional VS Diode Arrays (SPA Family of Products) Bi-directional Description The SMDJ-HRA High Reliability series is designed specifically to protect sensitive electronic
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationSMCJ Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
SMCJ Series RoHS Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationPLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationSMCJ5.0CA Thru SMCJ170CA
Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet
Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationSP A Discrete Unidirectional TVS Diode
SP1212 12A Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SP1212 unidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationTransient Voltage Suppressors. SMAJ Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Voltage Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More information