15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

Size: px

Start display at page:

Download "15,000 Watt Transient Voltage Suppressor (TVS) Protection Device"

Wendy Owen
6 years ago
Views:

1 M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range and also provides a variety of high reliability, uni- and bi-directional options as well. RoHS compliant versions are also available. These devices have the ability to clamp dangerous high voltage transients such as secondary effects of lightning strikes, providing circuit protection to several class levels in the IEC specification. Clamping time is virtually instantaneous. It also provides protection from transients caused by inductive load dumps, RFI, and ESD, providing protection to IEC and Screening in reference to MIL-PRF-1900 available Important: For the latest information, visit our website FEATURES Available in both unidirectional and bidirectional configurations 3σ lot norm screening performed on standby current I D 0% surge tested devices Suppresses transients up to 1 /00 s and 0 8/20 s (see Figure 1) Various screenings in reference to MIL-PRF-1900 are available. Refer to Hirel Non-Hermetic Product Portfolio for more details on the screening options. (See part nomenclature for all options.) High reliability controlled devices have wafer fabrication and assembly lot traceability Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant versions are available DO-204AR Package APPLICATIONS / BENEFITS Selections from 22 to 280 volts stand-off voltage (V WM) Economical TVS series for thru-hole mounting Protection from switching transients & induced RFI Fast sub-nanosecond response (unidirectional) Compliant to IEC and IEC for ESD and EFT protection respectively Secondary lightning protection per IEC with 42 ohms source impedance: Class 1, 2, 3, 4: M1KP22A to M1KP280CA Class : M1KP22A to M1KP280CA (short distance) Class : 1MKP22A to M1KP1CA (long distance) Secondary lightning protection per IEC with 12 ohms source impedance: Class 1 & 2: M1KP22A to M1KP280CA Class 3: M1KP22A to M1KP240CA Class 4: M1KP22A to M1KP120CA Secondary lightning protection per IEC with 2 ohms source impedance: Class 2: M1KP22A to M1KP220CA Class 3: M1KP22A to M1KP1CA Class 4: M1KP22A to M1KP4CA MSC Lawrence 6 Lake Street, Lawrence, MA or (978) Fax: (978) MSC Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +33 (0) Fax: +33 (0) Website: RF011, Rev. E (01/12/16) 2016 Microsemi Corporation Page 1 of 7

2 M1KP22A M1KP280CA(e3) 2 ºC unless otherwise noted Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature T J and T STG -6 to + Thermal Resistance, Junction to 3/8 inch ( mm) R ӨJL 20 o C/W lead length from body Thermal Resistance, Junction to Ambient (1) R ӨJA 80 o C/W Peak Pulse Power Dissipation (2) /00us P PP 1,000 W Steady-State Power T L = 30 ºC 3/8 inch ( mm) from body t clamping (0 volts to V (BR) min, theoretical) Unidirectional Bidirectional o C P D (1) W < 0 < Surge Peak Forward Current (3) I FSM 200 A Solder s 260 o C Notes: 1. When mounted on FR4 PC board with 4 mm 2 copper pads (1 oz) and track width 1 mm, length 2 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figures 1 and 2). 3. At 8.3 ms half-sine wave for unidirectional devices only. ps ns MECHANICAL and PACKAGING CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0. TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-70, method MARKING: Part number. POLARITY: Cathode indicated by band. No cathode band on bidirectional devices. TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities. WEIGHT: Approximately 1.4 grams. See Package Dimensions on last page. PART NOMENCLATURE M 1 K P 22 C A (e3) Reliability Level* M MA MX MXL (*see Hirel Non-Hermetic Product Portfolio) Peak Pulse Power Kilowatt Rating Encapsulated Plastic Package RoHS Compliance e3 = RoHS compliant Blank = non-rohs compliant Voltage Tolerance A = % tolerance level Polarity C = Bi-directional Blank = Unidirectional Stand-off Voltage Rating (see Electrical Characteristics table) RF011, Rev. E (01/12/16) 2016 Microsemi Corporation Page 2 of 7

3 M1KP22A M1KP280CA(e3) Symbol V(BR) I (BR) I D I FSM I PP P PP V (BR) V C V WM SYMBOLS & DEFINITIONS Definition Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/ C or mv/ C. Breakdown Current: The current used for measuring Breakdown Voltage V (BR). Standby Current: The current through the device at rated stand-off voltage. Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all repetitive transients (ref JESD282-B). Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives. Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The impulse power is the maximum-rated value of the product of I PP and V C. Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region. Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (I PP) for a specified waveform. Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature. RF011, Rev. E (01/12/16) 2016 Microsemi Corporation Page 3 of 7

4 M1KP22A M1KP280CA(e3) PART NUMBER REVERSE STAND- OFF VOLTAGE V WM (Note 1) ELECTRICAL 2 ºC MINIMUM BREAKDOWN VOLTAGE V I (BR) CLAMPING VOLTAGE V I PP STANDBY CURRENT I V WM PEAK PULSE CURRENT I PP (FIG. 2) TEMPERATURE COEFFICIENT OF V (BR) α V(BR) V V ma V A A mv/ºc M1KP22A M1KP24A M1KP26A M1KP28A M1KP30A M1KP33A M1KP36A M1KP40A M1KP43A M1KP4A M1KP48A M1KP1A M1KP4A M1KP8A M1KP60A M1KP64A M1KP70A M1KP7A M1KP78A M1KP8A M1KP90A M1KP0A M1KP1A M1KP120A M1KP130A M1KPA M1KP160A M1KP170A M1KP180A M1KP200A M1KP220A M1KP240A M1KP260A M1KP280A NOTES: ** Consult factory for availability of the 17 and 18 Volt devices on a special order basis. 1. Transient Voltage Suppressors are normally selected with reverse stand-off voltage (VWM) which should be equal to or greater than the dc or continuous peak operating voltage level. RF011, Rev. E (01/12/16) 2016 Microsemi Corporation Page 4 of 7

M1KP22A M1KP280CA(e3) GRAPHS Ppp Peak Pulse Power (kw) Waveform Non-Repetitive t d Pulse Width FIGURE 1 Peak Pulse Power Rating Curve Pulse Current in Percent of IPP t Time ms

5 M1KP22A M1KP280CA(e3) GRAPHS Ppp Peak Pulse Power (kw) Waveform Non-Repetitive t d Pulse Width FIGURE 1 Peak Pulse Power Rating Curve Pulse Current in Percent of IPP t Time ms Test waveform parameters: tr= µs, tp=00 µs FIGURE 2 Pulse Waveform for /00 µs Exponential Surge GRAPHS (continued) RF011, Rev. E (01/12/16) 2016 Microsemi Corporation Page of 7

Peak Pulse Power (Ppp) or continuous Average Power in Percent of 2 C C, Capacitance (pf) M1KP22A M1KP280CA(e3) V (BR) Reverse Breakdown Voltage (V) FIGURE 3 Typical Junction Capacitance

6 Peak Pulse Power (Ppp) or continuous Average Power in Percent of 2 C C, Capacitance (pf) M1KP22A M1KP280CA(e3) V (BR) Reverse Breakdown Voltage (V) FIGURE 3 Typical Junction Capacitance NOTE: For bidirectional construction, capacitance will be one-half that shown. Lead or Ambient Temperature C FIGURE 4 Derating Curve RF011, Rev. E (01/12/16) 2016 Microsemi Corporation Page 6 of 7

7 M1KP22A M1KP280CA(e3) PACKAGE DIMENSIONS Dimensions Dim Inch Millimeters Min Max Min Max LL BL BD LD RF011, Rev. E (01/12/16) 2016 Microsemi Corporation Page 7 of 7

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of