Teccor brand Protection Thyristors Surface Mount
|
|
- Melvyn Haynes
- 5 years ago
- Views:
Transcription
1 Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak No- Lead) is ideal for dense board applications that have multiple lines per card. The high density SLIC cards will benefit from this CSP technology by being able to fit more protection in a smaller PCB area. Features Agency Approvals Agency Agency File Number E13383 RoHS compliant Chip Scale Package (CSP) sizing Wide range of I PP ratings including: 5A for 2x1μs GR 189 waveform 2A for 5x31/1x7μs ITU/YDT waveform 1A for 1x1μs GR 189 waveform 15A for 1x56µs TIA-968-A Unidirectional transient voltage protection Small footprint (QFN) Teccor brand SIDACtor technology Protection solution to meet YD/T 95 YD/T 993 YD/T 182 GR 189 IEC ITU K.2/21 Basic/Enhanced TIA-968-A Electrical Characteristics Part Number Marking V DRM =5µA V I S I T V T =1 V bias Volts Volts mamps mamps Amps Volts pf Min Max Min Max Min Max P641Q22CLRP P61C P721Q22CLRP P71C P91Q22CLRP P91C P111Q22CLRP P1C P131Q22CLRP P13C P171Q22CLRP P17C All measurements are made at an ambient temperature of 25 C. V DRM is measured at I DRM. V F = 5V for all ratings. V F is measured at 1V/µs Special voltage (V S and V DRM ) and holding current ( ) requirements are available upon request. Parallel capacitive loads may affect electrical parameters. Cathode is marked by a line.
2 Surge Ratings I pp I TSM di/dt Series 2x1µs 1.2x5µs/8x2µs 1x16µs 1x56µs 1x1µs AC 6Hz Amps Amps Amps Amps Amps Amps Amps/µs Min Min Min Min Min Min Max C I PP applies to -4 C through +85 C temperature range. I PP is a repetitive surge rating and is guaranteed for the life of the product. Thermal Considerations Package Symbol Parameter Value Unit QFN T J Operating Junction Temperature Range -4 to +15 C T S Storage Temperature Range -65 to +15 C PIN 1 PIN 2 R uja Thermal Resistance: Junction to Ambient 12 C/W V-I Characteristics t r x t d Pulse Waveform +I -V V S V DRM V T V F I DRM I S I T +V IPP Peak Pulse Current %IPP 1 5 Peak Value Waveform = t r x t d t r = rise time to peak value t d = decay time to half value Half Value -I t r t d t Time (µs) Normalized V S Change Versus Junction Temperature Normalized DC Holding Current Versus Case Temperature Percent of V S Change % C (T C = 25 C) Ratio of C Case Temperature (T C ) C Junction Temperature (T J ) C 2
3 Soldering Parameters Reflow Condition Pb Free assembly - Temperature Min (T s(min) ) 15 C Pre Heat - Temperature Max (T s(max) ) 19 C - Time (min to max) (t s ) 9 12 seconds Average ramp up rate (Liquidus Temp (T L ) to peak 5 C/second max T S(max) to T L - Ramp-up Rate Reflow - Temperature (T L ) (Liquidus) 217 C 2 C/second max - Time (min to max) (t s ) 6 9 seconds Peak Temperature (T P ) 25 +/-5 C Time within 5 C of actual peak Temperature (t p ) Ramp-down Rate Time 25 C to peak Temperature (T P ) Do not exceed 26 C 2 4 seconds 4 C/second max 8 minutes Max. Reference Tech Brief (EC642) for additional soldering information and placement guidlines. Environmental Specifications Operating/Storage Temperature -4 C to ~ +15 C Physical Specifications Passive Aging 125 C, 1 hours Meet Spec Terminal Material Matte Tin-plated Copper Humidity Aging +85 C, 85% R.H. 1 hours Meet Spec Lead Solderability ANSI/J-STD-2 Thermal Shock MIL-STD-22 Method 17G +85 C/-4 C 1 times Meet spec Solvent Resistance MIL-STD-22, Method 215 No Change Vibration MIL-STD-883C, Method 27.1, Condition A No Change Dimensions TOP VIEW A B J BOTTOM VIEW C E F 1.5 (.59 ) 1.27 (.5 ) 2.54 (.1 ) Dimensions Inches Millimeters Min Typ Max Min Typ Max A B END VIEW N2 N1 K1 H SIDE VIEW M1 M2 K2 Recommended Soldering Pad Outline (Reference Only) C E F H J K K M M N N
4 Part Marking System Part Numbering System First Line: Product Name (See marking column in table on Page 1) Second Line: Lot number DEVICE TYPE P : SIDACtor MEDIAN VOLTAGE xxx : xxx volts CONSTRUCTION VARIATION 1 : Unidirectional SLIC device Pxxx1Q22CLRP PACKING STYLE RP : Reel Pack : Packaging: (Embossed carrier tape and reel per EIA 481-1, 12mm tape in 13 reel, 5, pieces per reel) L : RoHS Compliant SURGE Ipp Rating C : 5AMP 2x1µs 1AMP 1x1µs PACKAGE TYPE Q22 : QFN, 3.3mm x 3.3mm, two leaded package Packaging Package Type Packing Quantity Added Suffix Industry Standard QFN Embossed Carrier Reel Pack 5 RP EIA Tape and Reel Specification A D Reel Dimension K T W COVER TAPE Tape Dimension Items END TRAILER 16mm MIN B D P1 P P2 CARRIER TAPE Tape Leader and Trailer Dimensions C D1 COVER TAPE LEADER 4mm MIN W1 A N CARRIER TAPEE1 START B F E2 W Symbols Inches Millimeters Minimum Maximum Minimum Maximum A Reel Diameter N/A N/A 33. B Drive Spoke Width.59 N/A 1.5 N/A C Arbor Hole Diameter D Drive Spoke Diameter.795 N/A 2.2 N/A N Hub Diameter N/A 5. N/A W1 Reel Inner Width at Hub A Pocket Width at bottom B Pocket Length at bottom D Feed Hole Diameter D1 Pocket Hole Diameter.59 N/A 1.5 N/A E1 Feed hole position E2 Feed hole position F Feed hole center-pocket hole K Pocket Depth P Feed Hole Pitch P1 Component Spacing P2 Feed hole center-pocket hole T Carrier Tape Thickness W Embossed Carrier Tape Width W Cover Tape Width
5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Littelfuse: P641Q22CLRP P171Q22CLRP
SIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationPLED Unidirectional Series (PLEDxUx)
(PLEDxUx) PLED Open LED Protectors Agency Approvals Agency Agency File Number E133083 Description The (PLEDxUx Series) open LED protectors provide an electronic switching shunt path around a single LED
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency Pinout Designation Line in Ground Line in Schematic Symbol Line In (1 -Bias
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency gency ile Number The new SEP (SIDCtor Thyristor Ethernet/PoE Protector series
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C
Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationTeccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)
RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These
More informationTeccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C
RoHS Description Excellent unidirectional switches for phase control and general switching applications such as heating, motor control controls, converters / rectifiers and capacitive discharge ignitions.
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet
Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less
More informationPLEDxUSW Series, Unidirectional, White DO-214AA
PLEDxUSW Unidirectional Series PLEDxUSW Series, Unidirectional, White DO-214AA RoHS Description Agency Approvals Agency Agency File Number E133083 The PLEDxUSW open LED protectors provide an electronic
More informationPLEDxUSWxA Series - Unidirectional, White Body
PLEDxUSWxA Series - Unidirectional, White Body RoHS e3 Description Agency Approvals Agency Agency File Number E133083 PLEDxUSWxA open LED protectors provide a switching electronic shunt path when an LED
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationThyristors 4 Amp High Temperature Sensitive SCRs. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 130 C 4 A I T(AV)
RoHS Description This SJxx4x high temperature SCR series is ideal for uni-directional switch applications such as phase control in heating, motor speed controls, converters/rectifiers and capacitive discharge
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Balanced Series - MS-013. Description
SIDCtor Balanced Series - MS- RoHS Pb e Description The SIDCtor Balanced Series MS- are designed to protect baseband equipment from overvoltage transients. The patented Y configuration ensures balanced
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. MC Multiport Series - MS-013. Description
MC Multiport Series - MS-13 RoHS Pb e3 Description The MC Multiport Series MS-13 are low capacitance SIDCtor thyristors designed to protect broadband equipment from damaging overvoltage transients. The
More informationFeatures. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J
L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationTeccor brand Thyristors Silicon Controlled Rectifiers
Sx02xS EV Series Amp Sensitive SCR Description New Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR s junctions are
More informationFeatures. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL
Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationThyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationDSLP Series - SOT23-6
DSLP Series - SOT23-6 RoHS Pb e3 Description Agency Approvals Agency Agency File Number E133083 This new DSLP Series provides overvoltage protection for applications such as HD-SDI, HD-CVBS, ADSL, ADSL2,
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs
LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationTeccor brand Thyristors High Energy Unidirectional SIDACs
K2xx0yHU Series RoHS Description The new K2xx0yHU is a higher energy SIDC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationTeccor brand Thyristors Standard Bidirectional DIAC Trigger
Description The HTM, HT, and ST series of bilateral trigger DIACs offer a range of voltage characteristics from 27V to 70V. A DIAC semiconductor is a full-wave or bidirectional Thyristor. It is triggered
More informationKxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationPLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationLJxx08xx & QJxx08xHx Series
RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationLJxx08xx & QJxx08xHx Series
LJxx8xx & QJxx8xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTeccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs
QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC
More informationDK208D Rectifier Diode
DK208D Rectifier Diode RoHS Description This DK208D 8, 1200V rated standard recovery rectifier diode in a compact TO-252 surface mount package is ideal as a bypass diode or anti-parallel diode for active
More informationFeatures. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Schematic Symbol. Samples G
Sxx4xSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSP3050 Lead-Free/Green Series
RoHS Pb GREEN Description The SP3050 integrates low capacitance rail-to-rail diodes with an additional zener diode to protect each I/O pin against ESD and high surge events. This robust device can safely
More informationSymbol Parameter Test Conditions Value Unit RMS on-state current T C = 75 C 0.8 A I T(AV) Average on-state current T C
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationKxxx0yU SIDAC Series. Thyristors Standard Unidirectional SIDACs. RoHS. Description
Standard Unidirectional SIDCs xxx0yu SIDC Series RoHS Description The SIDC is a silicon unilateral voltage triggered switch. Upon application of a voltage exceeding the SIDC breakover voltage point, the
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTeccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV)
HS4040xQx Series RoHS Description The HS4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse
More informationTeccor brand Thyristors 16 Amp Standard SCR V DRM. Symbol Parameter Test Conditions Value Unit V DSM
16 mp Standard SCR RoHS Description The Littelfuse SCR S8016x series are specifically designed for Electric Vehicle On-Board Charger (EVOBC) applications. This SCR C line input rectifier can handle Level
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q6012xH1LED Series RoHS Description Q6012LH1LED series is designed to meet low load current characteristics typical in LED lighting applications. By keeping holding current at 8mA maximum, this Triac series
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationThyristors 30 / 35 Amp Alternistor (High Commutation) Triacs
Qxx30xHx & Qxx35xHx Series RoHS Description The 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTeccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description
Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationTeccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSP A Discrete Unidirectional TVS Diode
SP1212 12A Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SP1212 unidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationSP pF 24kV Bidirectional Discrete TVS
SP1312 11pF 24kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1312 bidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationLightning Surge Protection - SP4031 SP1050 Series 7 (N/C) 6 (N/C)
SP431 RoHS Pb GREEN Description The SP431 hybrid protector offers both overcurrent and differential only overvoltage protection for applications such as 1/1/1 BaseT ports. Compliant with the newest standards
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More informationThyristors 8 Amp Sensitive & Standard SCRs. Sxx08xSx & Sxx08x Series. Description
Sxx08xSx & Sxx08x Series RoHS Description This Sxx08x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationTVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationThyristors 25 Amp Standard & Alternistor (High Commutation) Triacs. Qxx25xx & Qxx25xHx Series. Description
Qxx25xx & Qxx25xHx Series RoHS escription This 25 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More information4 PIN DIP ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER ELT304X, ELT306X, ELT308X Series
Schematic Features: Peak breakdown voltage - 400V: ELT304X - 600V: ELT306X - 800V: ELT308X High isolation voltage between input and output (Viso=5000 V rms ) Zero voltage crossing Pb free and RoHS compliant.
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationBOURNS CD214A-F150-F1600 Rectifier Datasheet
BOURNS CD214A-F150-F1600 Rectifier Datasheet http://www.manuallib.com/bourns/cd214a-f150-f1600-rectifier-datasheet.html The markets of portable communications, computing and video equipment are challenging
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationZener Diode Surface Mount - 1W - SMF47xxA LF RoHS
SMF47xxA Description SMF47xxA Series Zener Diodes are excellent voltage stabilization devices. The Series is designed specifically for Voltage stabilization Voltage regulation, and so on. Zener Diode LF
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationCDSOT23-SR208 Steering Diode Array
*RoHS COMPLIANT A381L Features n Lead free device n RoHS compliant* n Protects four lines n ES and EFT protection n Low capacitance:
More informationGas Discharge Tube (GDT) Products. CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More informationTeccor brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx08xx & Qxx08xx & Qxx08xHx Series RoHS Description 8 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationSurface Mount RF PIN Low Distortion Attenuator Diodes. Technical Data. HSMP-381x Series and HSMP-481x Series. Features
Surface Mount RF PIN Low Distortion Attenuator Diodes Technical Data HSMP-81x Series and HSMP-481x Series Features Diodes Optimized for: Low Distortion Attenuating Microwave Frequency Operation Surface
More information6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER 4N2X Series 4N3X Series H11AX Series
Schematic Features: 4N2X series: 4N25, 4N26, 4N27, 4N28 4N3X series: 4N35, 4N36, 4N37, 4N38 H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5 High isolation voltage between input and output (Viso=5000 V
More informationSMD Photovoltaic Solar Cell Protection Rectifier
SMD Photovoltaic Solar Cell Protection Rectifier esmp Series 2 Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Ideal for automated placement Glass passivated pellet chip junction
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
V40PWM2C High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.50 V at I F = 5 A TMBS esmp Series 2 SlimDPAK (TO-252AE) PIN K K FEATURES Very low profile - typical
More informationTISP7015 (VLV) Overvoltage Protector
*RoHS COMPLIANT VERSIONS AVAILABLE TISP7015 TRIPLE ELEMENT THYRISTOR OVERVOLTAGE PROTECTORS TISP7015 (VLV) Overvoltage Protector Three Terminal Very Low Voltage (VLV) Protection Ion-Implanted Breakdown
More informationTrench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection
Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection Ultra Low V F = 0.33 V at I F = A TMBS 2 VBT6045CBP PIN PIN 2 HEATSIN PRIMARY CHARACTERISTICS I F(AV) 2 x 30 A V RRM 45 V I FSM
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More information5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors
Available 5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors DESCRIPTION Microsemi s unique and new Powermite UPT series of transient voltage suppressors feature oxidepassivated chips
More information