Teccor brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
|
|
- Nickolas Robinson
- 5 years ago
- Views:
Transcription
1 Lxx08xx & Qxx08xx & Qxx08xHx Series RoHS Description 8 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type devices guarantee gate control in Quadrants I & IV needed for digital control circuitry. Standard type devices normally operate in Quadrants I & III triggered from C line. lternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. gency pproval gency gency File Number L Package: E71639 Main Features Symbol Value Unit I T(RMS) 8 RM /V RRM 400 to 1000 V (Q1) 5 to 50 m Features & Benefits RoHS compliant Glass passivated junctions Voltage capability up to 1000 V Surge capability up to 100 Electrically isolated L-Package is UL recognized for 2500Vrms Solid-state switching eliminates arcing or contact bounce that create voltage transients No contacts to wear out from reaction of switching events Restricted (or limited) RFI generation, depending on activation point of sine wave Requires only a small gate activation pulse in each half-cycle Schematic Symbol pplications dditional Information G Excellent for C switching and phase control applications such as heating, lighting, and motor speed controls. Typical applications are C solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. lternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Datasheet Resources Samples
2 bsolute Maximum Ratings Sensitive Triac (4 Quadrants) Symbol Parameter Value Unit I T(RMS) I TSM RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, initial = 25 C) Lxx08Ly T C = 80 C Lxx08Ry / Lxx08Vy / Lxx08Dy T C = 85 C f = 50 Hz t = 20 ms 65 f = 60 Hz t = 16.7 ms 85 8 I 2 t I 2 t Value for fusing t p = 8.3 ms s di/dt Critical rate of rise of on-state current I G = 50m with 0.1µs rise time f = 120 Hz = 110 C 70 /μs M Peak gate trigger current t p 10 μs = 110 C 1.6 P G(V) verage gate power dissipation = 110 C 0.4 W T stg Storage temperature range -40 to 150 C Operating junction temperature range -40 to 110 C Note: xx = voltage, y = sensitivity bsolute Maximum Ratings Standard Triac Symbol Parameter Value Unit I T(RMS) I TSM RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, initial = 25 C) Qxx08Ry / Qxx08Ny T C = 95 C 8 Qxx08Ly T C = 90 C f = 50 Hz t = 20 ms 83 f = 60 Hz t = 16.7 ms 100 I 2 t I 2 t Value for fusing t p = 8.3 ms 41 2 s di/dt M Critical rate of rise of on-state current I G = 200m with 0.1µs rise time Peak gate trigger current f = 120 Hz = 125 C 70 /μs t p 10 μs; T GTM = 125 C 1.8 P G(V) verage gate power dissipation = 125 C 0.5 W T stg Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C Note: xx = voltage, y = sensitivity
3 bsolute Maximum Ratings lternistor (3 Quadrants) Symbol Parameter Value Unit Qxx08LHy T C = 90 C I T(RMS) RMS on-state current (full sine wave) Qxx08RHy / Qxx08NHy Qxx08VHy / Qxx08DHy T C = 95 C 8 Qxx08VHy / Qxx08DHy 80 I TSM Non repetitive surge peak on-state current (full cycle, initial = 25 C) f = 50 Hz f = 60 Hz t = 20 ms t = 16.7 ms Qxx08LHy / Qxx08RHy / Qxx08NHy Qxx08VHy / Qxx08DHy Qxx08LHy / Qxx08RHy / Qxx08NHy Qxx08VHy / Qxx08DHy 30 I 2 t I 2 t Value for fusing t p = 8.3 ms Qxx08LHy / Qxx08RHy / Qxx08NHy 41 2 s di/dt Critical rate of rise of on-state current f = 120 Hz = 125 C 70 /μs M Peak gate trigger current t P 10 μs; M = 125 C Qxx08VHy / Qxx08DHy Qxx08LHy / Qxx08RHy / Qxx08NHy P G(V) verage gate power dissipation = 125 C = 10m = 35m Qxx08VHy / Qxx08DHy Qxx08LHy / Qxx08RHy / Qxx08NHy W T stg Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C Note: xx = voltage, y = sensitivity Electrical Characteristics ( = 25 C, unless otherwise specified) Sensitive Triac (4 Quadrants) Symbol Test Conditions Quadrant Lxx08x6 Lxx08x8 Unit = 12V R L = 60 Ω I II III IV V GT = 12V R L = 60 Ω LL MX. 1.3 V V GD = RM R L = 3.3 kω = 110 C LL MIN. 0.2 V I H I T = 100m MX m dv/dt = RM Gate Open = 100 C MX V TYP. 600V (dv/dt)c (di/dt)c = 4.3 /ms = 110 C TYP. 2 2 V/μs t gt I G = 100m PW = 15µs I T = 11.3 (pk) TYP μs Note: xx = voltage, x = package, y = sensitivity m V/μs
4 Electrical Characteristics ( = 25 C, unless otherwise specified) Standard Triac Symbol Test Conditions Quadrant Qxx08x4 Qxx08x5 Unit = 12V R L = 60 Ω I II III IV MX. TYP m V GT = 12V R L = 60 Ω I II III MX. 1.3 V V GD = RM R L = 3.3 kω = 125 C LL MIN. 0.2 V I H I T = 200m MX m 400V 150 dv/dt = RM Gate Open = 125 C 600V 125 MIN. 800V V 80 V/μs (dv/dt)c (di/dt)c = 4.3 /ms = 125 C TYP. 4 4 V/μs t gt I G = 100m PW = 15µs I T = 11.3 (pk) TYP μs Electrical Characteristics ( = 25 C, unless otherwise specified) lternistor Triac (3 Quadrants) Symbol Test Conditions Quadrant Qxx08xH3 Qxx08xH4 Unit = 12V R L = 60 Ω I II III MX m V GT = 12V R L = 60 Ω I II III MX. 1.3 V V GD = RM R L = 3.3 kω = 125 C I II III MIN. 0.2 V I H I T = 100m MX m 400V Qxx08LHy / Qxx08RHy / Qxx08NHy 600V V 200 dv/dt = RM Gate Open = 125 C MIN. 1000V V V/μs Qxx08VHy / Qxx08DHy 600V V V 150 (dv/dt)c (di/dt)c = 4.3 /ms = 125 C MIN V/μs t gt I G = 100m PW = 15µs I T = 11.3 (pk) TYP μs Note : xx = voltage, x = package, y = sensitivity
5 Static Characteristics Symbol Test Conditions Value Unit V TM I TM = 11.3 t p = 380 µs MX V Lxx08xy = 25 C V 10 μ = 110 C V 0.5 m = 25 C V 20 μ I DRM RM = V RRM Qxx08xy = 125 C V 2 = 100 C 1000V MX. 3 m I RRM Qxx08xHy V 10 = 25 C 1000V 20 = 125 C V 2 = 100 C 1000V 3 μ m Thermal Resistances R θ(j-c) Symbol Parameter Value Unit Junction to case (C) L/Qxx08Ryy / L/Qxx08Nyy 1.5 L/Qxx08Lyy 2.8 C/W L/Qxx08Vyy 2.1 L/Qxx08Ryy 45 R θ(j-) Junction to ambient L/Qxx08Lyy 50 C/W Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity L/Qxx08Vyy 64 Figure 1: Definition of Quadrants Figure 2: Normalized DC Gate Trigger Current for ll Quadrants vs. Junction Temperature LL POLRITIES RE REFERENCED TO POSITIVE (Positive Half Cycle) (-) GTE (+) GTE ( = 25 C) REF QII QIII QI QIV REF + Ratio of (-) GTE REF (+) GTE NEGTIVE (Negative Half Cycle) REF NOTE: lternistors will not operate in QIV Note: lternistors will not operate in QIV Junction Temperature ( )- ºC
6 Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: Normalized DC Gate Trigger Voltage for ll Quadrants vs. Junction Temperature I H I H ( = 25 C) V GT V GT ( = 25 C) Ratio of Ratio of Junction Temperature ( )- ºC Junction Temperature ( )- ºC Figure 5: Power Dissipation (Typical) vs. RMS On-State Current Figure 6: Maximum llowable Case Temperature vs. On-State Current (Sensitive Triac) verage On-State Power Dissipation (P D(V) ) - Watts Maximum llowable Case Temperature (T C ) - C Lxx08Ly CURRENT WVEFORM: Sinusoidal LOD: Resistive or Inductive CONDUCTION NGLE: 360 CSE TEMPERTURE: Measured as shown on Dimensional Drawings Lxx08Vy Lxx08Dy Lxx08Ry RMS On-State Current (I T(RMS) ) - mps RMS On-State Current (I T(RMS) ) - mps Figure 7: Maximum llowable Case Temperature vs. On-State Current (Standard / lternistor Triac) Figure 8: On-State Current vs. On-State Voltage (Typical) Maximum llowable Case Temperature (T C ) - C Qxx08Lyy Qxx08Ryy Qxx08Nyy Qxx08Vyy Qxx08Dyy Postitive or Negative Instantaneous On-State Current (i T ) - mps T C = 25 C RMS On-State Current (I T(RMS) ) - mps Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Postitive or Negative Instantaneous On-State Voltage (v T ) - Volts
7 Figure 9: Maximum llowable mbient Temperature vs. On-State Current 120 Maximum llowable mbient Temperature (T ) - C CURRENT WVEFORM: Sinusoidal LOD: Resistive or Inductive CONDUCTION NGLE: 360 FREE IR RTING - NO HETSINK L/Qxx08Vyy L/Qxx08Lyy L/Qxx08Ryy RMS On-State Current (I T(RMS) ) - mps Figure 10: Surge Peak On-State Current vs. Number of Cycles 100 Peak Surge (Non-Repetitive) On-State Current (I TSM ) - mps 10 L/Qxx08Vyy L/Qxx08Dyy L/Qxx08Ryy L/Qxx08Lyy L/Qxx08Nyy SUPPLY FREQUENCY: 60 Hz Sinusoidal LOD: Resistive RMS On-State Current: [I T(RMS) ]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value Surge Current Duration- Full Cycles Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
8 Temperature Teccor brand Thyristors Soldering Parameters Reflow Condition Pb Free assembly T P t P - Temperature Min (T s(min) ) 150 C Ramp-up Pre Heat - Temperature Max (T s(max) ) 200 C - Time (min to max) (t s ) secs verage ramp up rate (Liquidus Temp) (T L ) to peak 5 C/second max T L T S(max) T S(min) Preheat t L Ramp-down T S(max) to T L - Ramp-up Rate 5 C/second max t S - Temperature (T L ) (Liquidus) 217 C Reflow - Temperature (t L ) seconds Peak Temperature (T P ) /-5 C 25 time to peak temperature Time Time within 5 C of actual peak Temperature (t p ) seconds Ramp-down Rate 5 C/second max Time 25 C to peak Temperature (T P ) 8 minutes Max. Do not exceed 280 C Physical Specifications Environmental Specifications Terminal Finish Body Material Terminal Material Design Considerations 100% Matte Tin-plated UL recognized epoxy meeting flammability classification 94V-0 Copper lloy Careful selection of the correct device for the application s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Test C Blocking (RM ) Temperature Cycling Temperature/ Humidity High Temp Storage Low-Temp Storage Resistance to Solder Heat Solderability Lead Bend Specifications and Conditions MIL-STD-750, M-1040, Cond pplied Peak C 125 C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40 C to +150 C; 15-min dwell-time EI / JEDEC, JESD hours; 320V - DC: 85 C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150 C 1008 hours; -40 C MIL-STD-750 Method 2031 NSI/J-STD-002, category 3, Test MIL-STD-750, M-2036 Cond E
9 Dimensions TO-220B (R-Package) Non-Isolated Mounting Tab Common with Center Lead E B C D T C MESURING POINT O P RE (REF.) 0.17 IN Dimension Inches Millimeters Min Max Min Max B C D E G F L H R NOTCH IN GTE LED TO ID. NON-ISOLTED TB F G H J K K J GTE N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). L M N O P R Dimensions TO-220B (L-Package) Isolated Mounting Tab E B C D T C MESURING POINT RE (REF.) 0.17 IN 2 O P Dimension Inches Millimeters Min Max Min Max B C D E F F G L H R K J GTE N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). G H J K L M N O P R
10 Dimensions TO-263B (N-Package) D 2 -PK Surface Mount B V T C MESURING POINT C E RE: 0.11 IN 2 Dimension Inches Millimeters Min Max Min Max B S C W U D GTE K J E G D F H F G H J K S V U W Dimensions TO-251 (V-Package) V-PK Through Hole E D T C MESURING POINT H J RE: IN Inches Millimeters Dimension Min Typ Max Min Typ Max B B C D E C P Q R S K F G H I J GTE I G F L K L P Q R S
11 Dimensions TO-252 (D-Package) D-PK Surface Mount B E D T C MESURING POINT Dimension Inches Millimeters Min Typ Max Min Typ Max B C I G P Q GTE F O L M N RE: IN 2 K J H C D E F G H I J K L M N O P Q
12 Product Selector Part Number Voltage (xx) Gate Sensitivity Quadrants 400V 600V 800V 1000V I II III IV Type Package Lxx08L6 X X 5 m 10 m Sensitive Triac TO-220L Lxx08D6 X X 5 m 10 m Sensitive Triac TO-252 D-PK Lxx08R6 X X 5m 10m Sensitive Triac TO-220R Lxx08V6 X X 5 m 10 m Sensitive Triac TO-251 V-PK Lxx08L8 X X 10 m 20 m Sensitive Triac TO-220L Lxx08D8 X X 10 m 20 m Sensitive Triac TO-252 D-PK Lxx08R8 X X 10m 20m Sensitive Triac TO-220R Lxx08V8 X X 10 m 20 m Sensitive Triac TO-251 V-PK Qxx08NH3 X X 10m lternistor Triac TO-263 D²-PK Qxx08RH3 X X 10 m lternistor Triac TO-220R Qxx08VH3 X X 10 m lternistor Triac TO-251 V-PK Qxx08DH3 X X 10 m lternistor Triac TO-252 D-PK Qxx08L4 X 25 m Triac TO-220L Qxx08R4 X 25 m Triac TO-220R Qxx08N4 X 25 m Triac TO-263 D²-PK Qxx08LH4 X X X X 35 m lternistor Triac TO-220L Qxx08RH4 X X X X 35 m lternistor Triac TO-220R Qxx08VH4 X X X X 35 m lternistor Triac TO-251 V-PK Qxx08DH4 X X X X 35 m lternistor Triac TO-252 D-PK Qxx08NH4 X X X X 35 m lternistor Triac TO-263 D²-PK Qxx08L5 X X X 50 m Triac TO-220L Qxx08R5 X X X 50 m Triac TO-220R Qxx08N5 X X X 50 m Triac TO-263 D²-PK Packing Options Part Number Marking Weight Packing Mode Base Quantity L/Qxx08L/RyyTP L/Qxx08L/Ryy 2.2 g Tube Pack 500 (50 per tube) Qxx08NyyTP Qxx08Nyy 1.6 g Tube 500 (50 per tube) Qxx08NyyRP Qxx08Nyy 1.6 g Embossed Carrier 500 L/Qxx08DyyTP L/Qxx08Dyy 0.3 g Tube 750 (75 per tube) L/Qxx08DyyRP L/Qxx08Dyy 0.3 g Embossed Carrier 2500 L/Qxx08VyyTP L/Qxx08Vyy 0.4 g Tube 750 (75 per tube) Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
13 TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EI Standards (4.0) Gate Dia (1.5) 0.63 (16.0) (13.3) * XXXXXX XX DC XXXXXX XX DC XXXXXX XX DC XXXXXX * Cover tape (8.0) (13.0) rbor Hole Dia (330.0) Dimensions are in inches (and millimeters) (16.3) Direction of Feed TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EI Standards 0.63 (16.0) (4.0) Gate DI (1.5) (24.0) (21.0) * * Cover tape (13.0) rbor Hole Dia (330.0) Dimensions are in inches (and millimeters) (25.7) Direction of Feed
14 Teccor brand Thyristors Part Numbering System DEVICE TYPE L : Sensitive Triac Q : Triac or lternistor VOLTGE RTING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V CURRENT 08: 8 Q L 5 56 LED FORM DIMENSIONS xx : Lead Form Option SENSITIVITY & TYPE Sensitive Triac: 6 : 5 m (QI, II, III) 10 m (QIV) 8 : 10 m (QI, II, III) 20 m (QIV) Standard Triac: 4 : 25 m (QI, II, III) 5 : 50 m (QI, II, III) lternistor Triac: H3 : 10 m (QI, II, III) H4 : 35 m (QI, II, III) PCKGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D 2 PK) V : TO-251 (VPK) D : TO-252 (DPK) Part Marking System TO-251 (V Package) TO-252 (D Package) L6008V5 YMLDD Date Code Marking Y:Year Code M: Month Code L: Location Code DD: Calendar Code TO-220 B - (L and R Package) TO-263 B - (N Package) Q6008R5 YMXXX L6008V5 YMLDD Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code
Teccor brand Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx06xx & Qxx06xx & Qxx06xHx Series RoHS Description 6 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTeccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation
More informationTeccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description
Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationThyristors 30 / 35 Amp Alternistor (High Commutation) Triacs
Qxx30xHx & Qxx35xHx Series RoHS Description The 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationThyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationThyristors 8 Amp Sensitive & Standard SCRs. Sxx08xSx & Sxx08x Series. Description
Sxx08xSx & Sxx08x Series RoHS Description This Sxx08x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationThyristors 25 Amp Standard & Alternistor (High Commutation) Triacs. Qxx25xx & Qxx25xHx Series. Description
Qxx25xx & Qxx25xHx Series RoHS escription This 25 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationTeccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV)
HS4040xQx Series RoHS Description The HS4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Schematic Symbol. Samples G
Sxx4xSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current
More informationLJxx08xx & QJxx08xHx Series
RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationLJxx08xx & QJxx08xHx Series
LJxx8xx & QJxx8xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature
More informationSymbol Parameter Test Conditions Value Unit RMS on-state current T C = 75 C 0.8 A I T(AV) Average on-state current T C
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
More informationTeccor brand Thyristors 16 Amp Standard SCR V DRM. Symbol Parameter Test Conditions Value Unit V DSM
16 mp Standard SCR RoHS Description The Littelfuse SCR S8016x series are specifically designed for Electric Vehicle On-Board Charger (EVOBC) applications. This SCR C line input rectifier can handle Level
More informationFeatures. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q6012xH1LED Series RoHS Description Q6012LH1LED series is designed to meet low load current characteristics typical in LED lighting applications. By keeping holding current at 8mA maximum, this Triac series
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C
Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationTeccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)
RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These
More informationFeatures. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J
L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationTeccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs
QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense
More informationDK208D Rectifier Diode
DK208D Rectifier Diode RoHS Description This DK208D 8, 1200V rated standard recovery rectifier diode in a compact TO-252 surface mount package is ideal as a bypass diode or anti-parallel diode for active
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs
LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationTeccor brand Thyristors High Energy Unidirectional SIDACs
K2xx0yHU Series RoHS Description The new K2xx0yHU is a higher energy SIDC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationTeccor brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs
escription 25 mp bi-directional solid state switch series is designed for switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC
More informationTeccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C
RoHS Description Excellent unidirectional switches for phase control and general switching applications such as heating, motor control controls, converters / rectifiers and capacitive discharge ignitions.
More informationThyristors 55 Amp Standard SCRs. Symbol Parameter Test Conditions Value Unit Repetitive Peak off-state/reverse Voltage 1600 V V DSM
RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet
Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less
More informationThyristors 4 Amp High Temperature Sensitive SCRs. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 130 C 4 A I T(AV)
RoHS Description This SJxx4x high temperature SCR series is ideal for uni-directional switch applications such as phase control in heating, motor speed controls, converters/rectifiers and capacitive discharge
More informationKxxx0yU SIDAC Series. Thyristors Standard Unidirectional SIDACs. RoHS. Description
Standard Unidirectional SIDCs xxx0yu SIDC Series RoHS Description The SIDC is a silicon unilateral voltage triggered switch. Upon application of a voltage exceeding the SIDC breakover voltage point, the
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More informationTeccor brand Thyristors Silicon Controlled Rectifiers
Sx02xS EV Series Amp Sensitive SCR Description New Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR s junctions are
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationFeatures. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL
Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp
More informationKxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. MC Multiport Series - MS-013. Description
MC Multiport Series - MS-13 RoHS Pb e3 Description The MC Multiport Series MS-13 are low capacitance SIDCtor thyristors designed to protect broadband equipment from damaging overvoltage transients. The
More informationSensitive Triacs. ( Amps) Features
Selected Packages* U.L. RECOGNIZED File #E71639 TO - 92 THERMOTAB TO-22AB TO-22AB G Sensitive Triacs (.8 8. ) 11 General Description Teccor's line of sensitive gate triacs includes devices with current
More information(1 A to 70 A) Features. Compak SCR
Selected Packages* File #E71639 U.L. RECONIZED TO-263 D 2 Pak TO-92 *TO-218 TO-252 D-Pak TO-22 *TO-218X 3-lead Compak *TO-22 TO-251 V-Pak (1 to 7 ) E6 eneral Description The Teccor line of thyristor SCR
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Balanced Series - MS-013. Description
SIDCtor Balanced Series - MS- RoHS Pb e Description The SIDCtor Balanced Series MS- are designed to protect baseband equipment from overvoltage transients. The patented Y configuration ensures balanced
More informationTriacs. ( Amps) Features
Selected Packages* U.L. RECOGNIZED File #E71639 THERMOTAB TO-22AB TO - 92 TO-22AB G Triacs (.8 25 ) 2 General Description These gated triacs from Teccor Electronics are part of a broad line of bidirectional
More informationTeccor brand Thyristors Standard Bidirectional DIAC Trigger
Description The HTM, HT, and ST series of bilateral trigger DIACs offer a range of voltage characteristics from 27V to 70V. A DIAC semiconductor is a full-wave or bidirectional Thyristor. It is triggered
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency Pinout Designation Line in Ground Line in Schematic Symbol Line In (1 -Bias
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency gency ile Number The new SEP (SIDCtor Thyristor Ethernet/PoE Protector series
More informationTriacs. (0.8 A to 35 A) Features. Compak Package. General Description
* Selected Packages U.L. RECONIZED File #E71639 E2 TO-92 TO-22 *TO-22 3-lead Compak TO-263 D 2 Pak TO-252 D-Pak *TO-3 Fastpak TO-251 V-Pak (.8 A to 35 A) RoHS E2 eneral Description These gated triacs from
More informationMAC08BT1, MAC08MT1. Thyristors. Surface Mount 200V - 600V > MAC08BT1, MAC08MT1. Description
MAC08BT1, MAC08 Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Sensitive
More informationACS120. Overvoltage protected AC switch (ACS ) Applications. Description. Features. Benefits
Overvoltage protected AC switch (ACS ) Applications Datasheet - production data Features Blocking voltage: V DRM / V RRM = +/- 700 V Avalanche controlled: V CL typ. = 1100 V Nominal conducting current:
More informationBTA40 and BTA/BTB41 Series
STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general
More informationPOW-R-BLOK TM Dual SCR Isolated Module 500 Amperes / Up to 1600 Volts. LD43 50 Dual SCR POW-R-BLOK TM Module 500 Amperes / Volts
mperes / Up to 16 Volts R OUTLINE DRWING B C J F 1 3 L H Q - DI. (4 TYP.) P - M1 THD (3 TYP.) T - (4 TYP.) S 4 7 5 6 E K M G D LD43 5 Dual SCR Module mperes / 8-16 Volts LD43 Outline Dimensions Dimension
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. * Selected Packages U.L. RECONIZED File #E71639 E4 *TO-22 *TO-218X *TO-218
More informationT405Q A sensitivetriacs. Description. Features. Applications
4 A sensitivetriacs G A2 A1 Description Datasheet - production data Sensitive Triacs are intended in general purpose applications where high surge current capability is required. These Triacs feature a
More informationPOW-R-BLOK TM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts CD62 15B, CD67 15B
5 mperes / Up to Volts B G "J" () OUTLINE DRWING D E F F 6 7 4 5 M "K" () R S Description: Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging.
More informationT1635T-8FP. 16 A Snubberless Triac. Features. Applications. Description
16 A Snubberless Triac G A A1 Features Datasheet production data Medium current Triac High static and dynamic commutation Three quadrants ECOPACK compliant component Complies with UL standards (File ref:
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationACST310-8B. Overvoltage protected AC switch. Description. Features. Applications. Benefits
Overvoltage protected AC switch Datasheet production data Features AC switch with self over voltage protection Microcontroller direct driven (low gate current max. 10 ma) Three quadrants (Q1, Q2 and Q3)
More informationSymbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6V I T(RMS) = 4 A I TSM = 4 A I GT = 5mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 4A) Gate Trigger Current : 5mA High commutation
More informationT1610, T1635, T1650 BTA16, BTB16 Datasheet
T1610, T1635, T1650 BTA16, BTB16 Datasheet Snubberless, logic level and standard 16 A Triacs A2 Features Medium current Triac A2 G A1 Low thermal resistance with clip bonding Low thermal resistance insulation
More informationBTA10, BTB10 T1035, T1050 Datasheet
BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless, logic level and standard Triacs Features Medium current Triac G A1 Low thermal resistance with clip bonding Low thermal resistance insulation ceramic
More informationMC4DCM, MAC4DCN. Thyristors. Surface Mount 600V - 800V > MC4DCM, MAC4DCN. Description
MCDCM, MACDCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size Surface
More informationBTA10 and BTB10 Series
BTA and BTB Series SNUBBERLESS & STANDARD A TRIACS Table : Main Features Symbol Value Unit I T(RMS) A V DRM /V RRM 6 and 8 V G A I GT (Q ) 5 to 5 ma DESCRIPTION Available either in through-hole or surface-mount
More informationADV. ADV Scan the QR code to view the latest product information ADS12C60F/80F. 3 Quadrants Triacs. General Description. Features
3 Quadrants Triacs General Description High current density due to mesa technology.the DS12C triac series is suitable for general purpose C switching. They can be used as an ON/OFF function in applications
More informationBTA A Snubberless Triacs. Features. Description. I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma
20 A Snubberless Triacs Datasheet production data Features I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma Description G A2 A1 The Triacs use high performance glass passivated
More informationBTA12, BTB12, T1205 T1210, T1235, T1250 Datasheet
BTA12, BTB12, T1205 T1210, T1235, T1250 Datasheet 12 A Snubberless, logic level and standard Triacs A2 Features Medium current Triac G A1 Low thermal resistance with clip bonding Low thermal resistance
More informationT4 series. 4 A Triacs. Features. Applications. Description. Table 2. Device summary
4 A Triacs Datasheet production data. Table 1. Main characteristics Symbol Value Unit I T(rms) 4 A V DRM, V RRM 600 to 800 V I GT 5 to 35 ma Table 2. Device summary Symbol Marking Features Three quadrants
More informationMAC12HCDG, MAC12HCMG, MAC12HCNG
MAC2HCDG, MAC2HCMG, MAC2HCNG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full wave, silicon gate controlled
More informationPOW-R-BLOK TM Dual SCR Isolated Module 150 Amperes / Up to 1600 Volts. CD63 15A Dual SCR Isolated POW-R-BLOK TM Module 150 Amperes / Up to 1600 Volts
CD63 15 15 mperes / Up to 16 B G "J" (3) OUTLINE DRWING D E F F 7 6 1 2 3 5 4 M F "K" (2) S Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. BTA16, BTB16 and T16 Series SNUBBERLESS, LOGIC LEVEL & STANDARD 16A TRIACS
More informationT x V 25 A Snubberless Triac. Description. Features. Applications. Benefits
1200 V 25 A Snubberless Triac Description Datasheet production data Its 1200 V blocking voltage enables use in 3-phase industrial application. Its noise immunity and dynamic commutation makes it suitable
More informationACST1635-8FP. Overvoltage protected AC switch. Description. Features. Applications
Overvoltage protected AC switch Description Datasheet production data Features OUT COM TO-220FPAB Enables equipment to meet IEC 61000-4-5 surge with overvoltage crowbar technology High noise immunity against
More informationSymbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6 V I T(RMS) = 5 A I TSM = 6 A I GT = 35mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 5A) Gate Trigger Current : 35mA High commutation
More informationACS1026T. AC switch family Transient protected AC switch (ACS ) Main product characteristics OUT COM TO-92 SO-8 ACS102-6T1 ACS102-6T1-TR.
AC switch family Transient protected AC switch (ACS ) Main product characteristics Overvoltage protection by crowbar technology High noise immunity - static dv/dt > 300 V/µs Applications AC ON/OFF static
More informationMCR70xA Series. Thyristors. Surface Mount 100V -600V > MCR70xA Series G K. Description
MCR70x Series Pb Description PNPN Componants designed for high volume, low cost consumer applications such as temperature, light and speed control; process and remote control; and warning systems where
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationMAC210A8, MAC210A10. Thyristors. Surface Mount 400V - 800V > MAC210A8, MAC210A10. Description
MAC210A8, MAC210A10 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full wave silicon gate
More informationMAC228A. Thyristors. Surface Mount 400V - 800V > MAC228A. Description
MAC228A Pb Description Designed primarily for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching
More informationADV. ADV Scan the QR code to view the latest product information ADT40C60H/80H. 3 Quadrants Triacs. General Description. Features
3 Quadrants Triacs General Description High current density due to mesa technology. the DT4C triac series is suitable for general purpose C switching. They can be used as an ON/OFF function in applications
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationMCR703A Series. Thyristors. Surface Mount 100V -600V > MCR703A Series G K. Description
MCR703 Series Pb Description PNPN devices designed for high volume, low cost consumer applications such as temperature, light and speed control; process and remote control; and warning systems where reliability
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationBTA/BTB12 and T12 Series
SNUBBERLESS, LOIC LEVEL & STANDARD 1A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 1 A V DRM /V RRM 6 and 8 V I T (Q1 ) 5 to 5 ma DESCRIPTION Available either in through-hole or surface-mount packages,
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTN1610H-6T. High temperature 16 A SCRs. Description. Features. Applications
High temperature 16 A SCRs Datasheet production data Description Thanks to a junction temperature T j up to 150 C and a non-isolated TO-220 package, the TN1610H-6T offers high thermal performance operation
More informationACST6. Overvoltage protected AC switch. Applications. Description. Features. Benefits
Overvoltage protected AC switch Datasheet - production data OUT TO-220AB ACST610-8T OUT Features COM G OUT COM D²PAK ACST610-8G TO-220FPAB ACST610-8FP Figure 1. Functional diagram G G OUT COM OUT I²PAK
More informationADV. ADV Scan the QR code to view the latest product information ADS4CH60/80. 3 Quadrants High temperature Triacs. General Description.
3 Quadrants High temperature Triacs General Description High current density due to mesa technology, guaranteed maximum junction temperature C. The DS4CH triac series is suitable for general purpose C
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationMAC16DG, MAC16MG, MAC16NG
MAC6DG, MAC6MG, MAC6NG Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking Voltage to 800
More informationTeccor brand Protection Thyristors Surface Mount
Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak
More informationT2550H-600T 25A TRIACS MAIN FEATURES:
SNUBBERLESS HIGH TEMPERATURE 25A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 25 A V DRM /V RRM 600 V I GT (Q1 ) 50 ma DESCRIPTION Specifically designed for use in high temperature environment (found
More informationMCR08B, MCR08M. Thyristors. Surface Mount 600V - 800V > MCR08B, MCR08M G K. Description
MCR8B, MCR8M Pb Description PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection
More informationT1235H, T1250H. High temperature 12 A Snubberless Triacs. Features. Applications. Description
High temperature 12 A Snubberless Triacs Features Medium current Triac 150 C max. T j turn-off commutation Low thermal resistance with clip bonding Very high 3 quadrant commutation capability G A1 Packages
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationBTA08, BTB08, T810 T835, T850 Datasheet
BTA08, BTB08, T810 T835, T850 Datasheet Snubberless, logic level and standard 8 A Triacs A2 Features On-state rms current, I T(RMS) 8 A G Repetitive peak off-state voltage, V DRM / V RRM 600 V to 800 V
More informationPOW-R-BLOK TM Dual SCR Isolated Module 250 Amperes / Up to 1600 Volts. ND43 25 Dual SCR Isolated POW-R-BLOK TM Module 250 Amperes / Up to 1600 Volts
25 mperes / Up to 16 olts G J 1 G1 G2 2 OUTLINE DRWING T - M8 THD. (3 TYP.) M U - DI. (4 TYP.) N C B S Q W Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control
More informationT1620T-8I, T1635T-8I. Snubberless 16 A Triac. Features. Applications. Description
Snubberless 16 A Triac Datasheet production data Features High static and dynamic commutation Three quadrants Snubberless device Package is RoHS (2002/95/EC) compliant Tab insulated, voltage = 2500 V rms
More informationFeatures. Applications. This device is phase control : V DRM =600V. Marking Diagram SCT04N60D TO-252 SCT04N600. Triac TO-252. Rating.
Triac 600V, 4 STNDRD TRIC This device is suitable for low power C switching application, phase control application such as fan speed and temperature modulation control, lighting control and static switching
More informationT3035H-8I. 30 A V TO-220AB insulated H-series Snubberless Triac. Datasheet. Features. Applications. Description. TO-220AB insulated
Datasheet 3 A - 8 V TO-22AB insulated H-series Snubberless Triac G A2 A1 Features 3 A high current Triac 8 V symmetrical blocking voltage 15 C maximum junction temperature T j Three triggering quadrants
More informationBTA40 and BTA/BTB41 Series
STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general
More information2N6344. Thyristors. Surface Mount V > 2N6344. Description
2N6344 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled
More informationBTA40 and BTA/BTB41 Series
BTA4 and BTA/BTB41 Series STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41
More informationPLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
More informationBTA/BTB12 and T12 Series
BTA/BTB1 and T1 Series SNUBBERLESS, LOIC LEVEL & STANDARD 1A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 1 A V DRM /V RRM 6 and 8 V I T (Q1 ) to 5 ma DESCRIPTION Available either in through-hole or
More information