T1610, T1635, T1650 BTA16, BTB16 Datasheet

Size: px

Start display at page:

Download "T1610, T1635, T1650 BTA16, BTB16 Datasheet"

Sharyl Horton
5 years ago
Views:

1 T1610, T1635, T1650 BTA16, BTB16 Datasheet Snubberless, logic level and standard 16 A Triacs A2 Features Medium current Triac A2 G A1 Low thermal resistance with clip bonding Low thermal resistance insulation ceramic for insulated BTA High commutation (4Q) or very high commutation (3Q, Snubberless ) capability BTA series UL1557 certified (file ref: 81734) TO-220AB G A2 A1 G A2 A1 TO-220AB Ins. Packages are RoHS (2002/95/EC) compliant Insulated tab (BTA series, rated at 2500 V RMS ) A2 Applications D²PAK A2 A1 G Snubberless versions (BTA/BTB...W and T1635) especially recommended for use on inductive loads, because of their high commutation performances On/off or phase angle function in applications such as static relays, light dimmers and appliance motor speed controllers Description Product status link BTA16 BTB16 T1610 T1635 T1650 Available either in through-hole or surface mount packages, the BTA16, BTB16 and T1610, T1635 and T1650 Triac series are suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers. The Snubberless versions (W suffix and T1610, T1635, T1650) are especially recommended for use on inductive loads, because of their high commutation performance. By using an internal ceramic pad, the Snubberless series provide an insulated tab (rated at 2500 V RMS ) complying with UL standards (file reference: E81734). Product summary I T(RMS) V DRM /V RRM I GT Snubberless I GT standard 16 A 600, 800 V 10, 35, 50 ma 25, 50 ma DS Rev 11 - May 2018 For further information contact your local STMicroelectronics sales office.

2 Characteristics 1 Characteristics Table 1. Absolute maximum ratings Symbol Parameters Value Unit I T(RMS) RMS on-state current (full sine wave) TO-220AB, D 2 PAK T c = 100 C TO-220AB Ins. T c = 86 C 16 A I TSM Non repetitive surge peak on-state current (full cycle, T j initial = 25 C) F = 50 Hz t p = 20 ms 160 F = 60 Hz t p = 16.7 ms 168 A I 2 t I 2 t value for fusing t p = 10 ms 144 A 2 s dl/dt Critical rate of rise of on-state current I G = 2 x I GT, t r 100 ns F = 120 Hz T j = 125 C 50 A/µs V DSM /V RSM Non repetitive surge peak off-state voltage t p = 10 ms T j = 25 C V DRM /V RRM V I GM Peak gate current t p = 20 µs T j = 125 C 4 A P G(AV) Average gate power dissipation T j = 125 C 1 W T stg Storage junction temperature range -40 to +150 C T j Operating junction temperature range -40 to +125 C Table 2. Static electrical characteristics Symbol Test conditions T j Value Unit V (1) T I TM = 22.5 A, t p = 380 µs 25 C Max V V (1) TO threshold on-state voltage 125 C Max V R (1) D Dynamic resistance 125 C Max. 25 mω I DRM /I RRM V DRM = V RRM 25 C Max. 5 µa 125 C 2 ma 1. For both polarities of A2 referenced to A1 Table 3. Electrical characteristics (T j = 25 C, unless otherwise specified) - standard (4 quadrants) BTA16 Symbol Parameters Quadrant BTB16 Unit C B I GT (1) I - II - III Max. ma V D = 12 V, R L = 33 Ω IV V GT All Max. 1.3 V V GD V D = V DRM, R L = 3.3 kω, T j = 125 C All Min. 0.2 V I (2) H I T = 500 ma Max ma I L I G = 1.2 I GT I - III - IV Max II Max ma DS Rev 11 page 2/18

3 Characteristics BTA16 Symbol Parameters Quadrant BTB16 Unit C B dv/dt (2) V D = 67 % V DRM gate open, T j = 125 C Min V/µs (dv/dt)c (2) (di/dt)c = 7 A/ms, T j = 125 C Min V/µs 1. Minimum I GT is guaranteed at 5 % of I GT max. 2. For both polarities of A2 referenced to A1 Table 4. Electrical characteristics (T j = 25 C, unless otherwise specified) - Snubberless and logic level (3 quadrants) Symbol Parameters Quadrant T1610 / BTA16- SW / BTB16- SW T1635 / BTA16-CW / BTB16-CW T1650 / BTA16-BW / BTB16-BW Unit I GT (1) Max ma V D = 12 V, R L = 30 Ω V GT I - II - III Max. 1.3 V V GD V D = V DRM, R L = 3,3 kω, T j = 125 C Min. 0.2 V I (2) H I T = 500 ma Max ma I L I G = 1.2 I GT I - III Max II Max ma (dv/dt) (2) VD = 67 % V DRM gate open, T j = 125 C Min V/µs (dv/dt)c = 0.1 V/μs, T j = 125 C 8.5 (di/dt)c (2) (dv/dt)c = 10 V/μs, T j = 125 C Min. 3.0 Without snubber, T j = 125 C A/ms 1. Minimum I GT is guaranteed at 5 % of I GT max. 2. For both polarities of A2 referenced to A1 Table 5. Thermal resistance Symbol Parameters Value Unit R th(j-c) Max. junction to case (AC) TO-220AB / D²PAK 1.2 TO-220AB insulated 2.1 R Junction to ambient (S = 2 cm²) D²PAK 45 th(j-a) Junction to ambient TO-220AB / TO-220AB ins 60 C/W 1. Copper surface under tab. DS Rev 11 page 3/18

4 Characteristics (curves) 1.1 Characteristics (curves) Figure 2. Maximum power dissipation versus on-state RMS current (full cycle) Figure 3. RMS on-state current versus case temperature (full cycle) P(W) I T(RMS) (A) I T(RMS) (A) BTB/T16 14 BTA T c ( C) Figure 4. On-state rms current versus ambient temperature (full cycle) Figure 5. Relative variation of thermal impedance versus pulse duration I T(RMS) (A) D²PAK (S = 1 cm²) Printed circuit board FR4, copper thickness: 35 µm 1E+0 K = [Z th /R th ] Zth(j-c) 2.5 Zth(j-a) 2.0 1E T c ( C) t p (s) 1E-2 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 DS Rev 11 page 4/18

5 Characteristics (curves) Figure 6. On-state characteristics (maximum values) Figure 7. Surge peak on-state current versus number of cycles I TM (A) Tj max. Vto = 0.85 V Rd = 25 mω Tj = Tj max. I TSM (A) t=20ms Non repetitive Tj initial=25 C One cycle 10 Tj = 25 C Repetitive T C=85 C 40 1 V TM (V) Numb er of cycles Figure 8. Non-repetitive surge peak on-state current for a sinusoidal Figure 9. Relative variation of gate trigger current I GT, I H, I L [Tj] / I GT, I H, I L [T j = 25 C] I TSM (A),I t (A s) di/dt limitation: 50A/µs Tj initial=25 C IGT holding current and latching current versus junction temperature (typical values) ITSM 1.0 IH & IL 0.5 t (ms) p pulse with width t p < 10 ms T( j C) Figure 10. Relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values) Figure 11. Relative variation of critical rate of decrease of main current versus (junction temperature (typical values) (dl/dt)c [(dv/dt)c] / specified (dl/dt)c (dl/dt)c [Tj] / (dl/dt)c [Tj specified] B C SW/T1610 Snubberless and logic level types T1635/T1650/CW/BW (dv/dt)c (V/µs) Tj( C) DS Rev 11 page 5/18

6 Characteristics (curves) Figure 12. D²PAK thermal resistance junction to ambient versus copper surface under tab R th(j-a) ( C/W) Epoxy printed board FR4, copper thickness = 35 µm D²PAK SCu(cm²) DS Rev 11 page 6/18

7 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. DS Rev 11 page 7/18

8 TO-220AB Insulated and non Insulated package information 2.1 TO-220AB Insulated and non Insulated package information Epoxy meets UL 94,V0 Cooling method: by conduction (C) Recommended torque value: 0.55 N m Maximum torque value: 0.70 N m Figure 13. TO-220AB Insulated and non Insulated package outline B C Resin gate 0.5 mm max. protusion (1) I L b2 F A I4 l3 a1 c2 l2 a2 e b1 Resin gate 0.5 mm max. protusion (1) (1)Resin gate position accepted in one of the two positions or in the symmetrical opposites. M c1 DS Rev 11 page 8/18

9 TO-220AB Insulated and non Insulated package information Table 6. TO-220ABInsulated and non Insulated package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A a a B b b C c c e F I L I I I M Inch dimensions are for reference only. DS Rev 11 page 9/18

10 D²PAK package information 2.2 D²PAK package information Figure 14. D²PAK package outline E L2 c2 A E1 E2 L3 D2 H D D1 b2 b e G Resin gate 0.5 mm max. protrusion(1) A1 A2 A3 L V2 c R Gauge Plane (1) Resin gate position accepted in one of the two positions or in the symmetrical opposites DS Rev 11 page 10/18

11 D²PAK package information Table 7. D²PAK package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A A A b b c c D D D e E E E G H L L L R V Dimensions in inches are given for reference only DS Rev 11 page 11/18

12 D²PAK package information Figure 15. D²PAK recommended footprint (dimensions are in mm) DS Rev 11 page 12/18

13 Ordering information 3 Ordering information Figure 16. Ordering information scheme (BTA16 and BTB16 series) BT A BW (RG) Triac Insulation A = Insulated B = Non-insulated Current 16 = 16 A Voltage 600 = 600 V 800 = 800 V Sensitivity and type B = 50 ma C = 25 ma standard SW = 10 ma logic level Packing mode RG = Tube BW = 50 ma Snubberless CW = 35 ma Snubberless DS Rev 11 page 13/18

14 Ordering information Figure 17. Ordering information scheme (T8 series) T G (-TR) Triac series Current 16 = 16 A Sensitivity 10 = 10 ma 35 = 35 ma 50 = 50 ma Voltage 600 = 600 V 800 = 800 V Package G = D²PAK Packing mode Blank = Tube TR = Tape and reel DS Rev 11 page 14/18

15 Product selector 3.1 Product selector Table 8. Product selector Part Number Sensitivity Type Package BTB16-600C 35 ma Standard TO-220AB BTB16-600B BTB16-800B 50 ma Standard TO-220AB BTB16-600SW BTB16-800SW 10 ma Snubberless TO-220AB BTB16-600CW BTB16-800CW 35 ma Snubberless TO-220AB BTB16-600BW BTB16-800BW 50 ma Snubberless TO-220AB BTA16-600C 35 ma Standard TO-220AB Ins. BTA16-600B BTA16-800B 50 ma Standard TO-220AB Ins. BTA16-600SW BTA16-800SW 10 ma Snubberless TO-220AB Ins. BTA16-600CW BTA16-800CW 35 ma Snubberless TO-220AB Ins. BTA16-600BW BTA16-800BW 50 ma Snubberless TO-220AB Ins. T G T G 10 ma Snubberless D 2 PAK T G T G 35 ma Snubberless D 2 PAK T G 50 ma Snubberless D 2 PAK DS Rev 11 page 15/18

16 Ordering information 3.2 Ordering information Table 9. Ordering information Order code Marking Package Weight Base qty. Delivery mode BTA16-600BRG BTA16-600B BTA16-600BWRG BTA16-600BW BTA16-600CRG BTA16-600C BTA16-600CWRG BTA16-600CW BTA16-600SWRG BTA16-600SW TO-220AB Ins. Tube BTA16-800BRG BTA16-800B BTA16-800BWRG BTA16-800BW BTA16-800CWRG BTA16-800CW BTA16-800SWRG BTB16-600BRG BTB16-600BWRG BTB16-600CRG BTB16-600CWRG BTA16-800SW BTB16-600B BTB16-600BW BTB16-600C BTB16-600CW BTB16-600SWRG BTB16-600SW TO-220AB Tube BTB16-800BRG BTB16-800B BTB16-800BWRG BTB16-800BW BTB16-800CWRG BTB16-800CW BTB16-800SWRG BTB16-800SW T G-TR T G T G-TR T G T G-TR T G-TR T G T G D²PAK Tape and reel T G-TR T G T G T G 50 Tube DS Rev 11 page 16/18

17 Revision history Table 10. Document revision history Date Revision Changes Oct A Last update. 13-Feb TO-220AB delivery mode changed from bulk to tube. ECOPACK statement added. 03-Jul Added part number T Dec Mar May Updated value for V DSM / V RSM in Table 2. Updated temperature in Table 2 from 15 C to 86 C. Updated value for V DSM / V RSM in Table 2. Updated temperature in Table 2 from 15 C to 86 C. Updated Section Product status / summary. Added T1650 package information. DS Rev 11 page 17/18

18 IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved DS Rev 11 page 18/18

BTA10, BTB10 T1035, T1050 Datasheet

BTA10, BTB10 T1035, T1050 Datasheet 10 A Snubberless, logic level and standard Triacs Features Medium current Triac G A1 Low thermal resistance with clip bonding Low thermal resistance insulation ceramic