BTA16, BTB16 T1610, T1635

Size: px

Start display at page:

Download "BTA16, BTB16 T1610, T1635"

Arlene Grant
6 years ago
Views:

1 BTA16, BTB16 T1610, T A Snubberless, logic level and standard Triacs Features Medium current Triac Low thermal resistance with clip bonding Low thermal resistance insulation ceramic for insulated BTA High commutation (4Q) or very high commutation (3Q) capability BTA series UL1557 certified (File ref: 81734) RoHS ( 00/95/EC) compliant Insulated tab (BTA series, rated at 500 V RMS ) Applications Snubberless versions (BTA/BTB...W and T1635) especially recommended for use on inductive loads, because of their high commutation performances On/off or phase angle function in applications such as static relays, light dimmers and appliance motor speed controllers A1 G TO-0AB insulated BTA16 Description G A1 G Available either in through-hole or surface-mount packages, the BTA16, BTB16, T1610 and T1635 Triacs series are suitable for general purpose mains power AC switching. A1 D PAK T1610G T1635G A1 G TO-0AB BTB16 Table 1. Device summary Symbol Parameter BTA16 (1) BTB16 T1610 T1635 I T(RMS) On-state rms current V DRM /V RRM Repetitive peak off-state voltage 600/ / / /800 I GT (Snubberless) Triggering gate current 35/50 35/50-35 I GT (logic level) Triggering gate current I GT (standard) Triggering gate current 5/50 5/ Insulated TM: Snubberless is a trademark of STMicroelectronics December 009 Doc ID 7471 Rev 9 1/

2 Characteristics BTA16, BTB16, T1610, T Characteristics Table. Absolute maximum ratings Symbol Parameter Value Unit I T(RMS) On-state rms current (full sine wave) D PAK / TO-0AB TO-0AB insulated T c = 100 C T c = 86 C 16 A Non repetitive surge peak on-state F = 50 Hz t = 0 ms 160 I TSM current A (full cycle, T j initial = 5 C) F = 60 Hz t = 16.7 ms 168 I ² t I ² t value for fusing t p = 10 ms 144 A ² s di/dt V DSM / V RSM Critical rate of rise of on-state current I G = x I GT, t r 100 ns Non repetitive surge peak off-state voltage F = 10 Hz T j = 15 C 50 A/µs t p = 10 ms T j = 5 C V DRM /V RRM I GM Peak gate current t p = 0 µs T j = 15 C 4 A P G(AV) Average gate power dissipation T j = 15 C 1 W T stg Storage temperature range -40 to T j Maximum operating junction temperature -40 to + 15 V Table 3. Electrical characteristics (T j = 5 C, unless otherwise specified) Snubberless and logic level (3 quadrants) Symbol Test conditions Quadrant T1610 T1635 BTA16 / BTB16 SW CW BW Unit I (1) GT V D = 1 V I - II - III Max ma V GT R L = 33 Ω I - II - III Max. 1.3 V V GD V D = V DRM R L = 3.3 kω T j = 15 C I - II - III Min. 0. V I () H I T = 500 ma Max ma I - III I L I G = 1. I GT Max. ma II dv/dt () (di/dt)c () V D = 67 %V DRM gate open (dv/dt)c = 0.1 V/µs T j = 15 C T j = 15 C Min V/µs (dv/dt)c = 10 V/µs T j = 15 C Min Without snubber T j = 15 C A/ms 1. Minimum IGT is guaranted at 5% of I GT max. For both polarities of referenced to A1 /10 Doc ID 7471 Rev 9

3 BTA16, BTB16, T1610, T1635 Characteristics Table 4. Electrical characteristics (T j = 5 C, unless otherwise specified) standard (4 quadrants) Symbol Test conditions Quadrant BTA16 / BTB16 C B Unit I (1) I - II - III 5 50 GT Max. ma V D = 1 V R L = 33 Ω IV V GT ALL Max. 1.3 V V GD V D = V DRM R L = 3.3 kω T j = 15 C ALL Min. 0. V I () H I T = 500 ma Max ma I - III - IV I L I G = 1. I GT Max. ma II dv/dt () V D = 67 %V DRM gate open T j = 15 C Min V/µs (dv/dt)c () (di/dt)c = 7 A/ms T j = 15 C Min V/µs 1. Minimum IGT is guaranted at 5% of I GT max. For both polarities of referenced to A1 Table 5. Static characteristics Symbol Test conditions Value Unit V T () I TM =.5 A t p = 380 µs T j = 5 C Max V V to () Threshold voltage T j = 15 C Max V R d () Dynamic resistance T j = 15 C Max. 5 mω I DRM T j = 5 C 5 µa V I DRM = V RRM Max. RRM T j = 15 C ma Table 6. Thermal resistance Symbol Parameter Value Unit R th(j-c) Junction to case (AC) D PAK / TO-0AB 1. TO-0AB insulated.1 C/W R th(j-a) Junction to ambient S (1) = 1 cm ² D PAK 45 TO-0AB / TO-0AB insulated 60 C/W 1. S = Copper surface under tab Doc ID 7471 Rev 9 3/10

4 Characteristics BTA16, BTB16, T1610, T1635 Figure 1. Maximum power dissipation versus on-state rms current (full cycle) Figure. On-state rms current versus case temperature (full cycle) 0 P(W) 18 I T(RMS) (A) BTA BTB / T16 0 I T(RMS) (A) T ( C) C Figure 3. On-state rms current versus ambient temperature (full cycle) Figure 4. Relative variation of thermal impedance versus pulse duration I T(RMS) (A) printed circuit board FR4, copper thickness: 35 µm DPAK (S=1cm ) 1E+0 K=[Z th/rth] Zth(j-c) Zth(j-a).0 1E T ( C) C t p(s) 1E- 1E-3 1E- 1E-1 1E+0 1E+1 1E+ 5E+ Figure 5. On-state characteristics (maximum values) Figure 6. Surge peak on-state current versus number of cycles I TM(A) Tj max. V to = 0.85V R d = 5 mω I TSM(A) t=0ms 10 T= j Tj max. T j = 5 C Repetitive T C=85 C Non repetitive Tj initial=5 C One cycle 40 V TM(V) Number of cycles /10 Doc ID 7471 Rev 9

5 BTA16, BTB16, T1610, T1635 Characteristics Figure 7. Non-repetitive surge peak on-state current for a sinusoidal Figure 8. Relative variation of gate trigger current 3000 I TSM(A), I t (A s) di/dt limitation: 50A/µs Tj initial=5 C.5.0 I GT,I H,I L[T] j / I GT,I H,I L[T j=5 C] holding current and latching current versus junction temperature (typical values) 1000 ITSM 1.5 IGT 1.0 IH & IL pulse with width t t p(ms) p < 10 ms and corresponding value of I t I t 0.5 T j( C) Figure 9. Relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values) Figure 10. Relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values) (di/dt)c [(dv/dt)c] / Specified (di/dt)c Snubberless and Logic level types SW 6 5 (di/dt)c [T j ] / (di/dt)c [T j specified] Standard types B C 4 1. T1635/CW/BW (dv/dt)c (V/µs) T ( C) j Figure 11. D PAK thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35 µm) 80 R th(j-a) ( C/W) DPAK S(cm²) Doc ID 7471 Rev 9 5/10

6 Ordering information BTA16, BTB16, T1610, T1635 Ordering information Figure 1. Ordering information scheme (BTA16 and BTB16 series) BT A BW RG TRIAC series Insulation A = insulated B = non insulated Current 16 = 16 A Voltage 600 = 600 V 800 = 800 V Sensitivity and type B = 50 ma Standard C = 5 ma Standard SW = 10 ma Logic Level Packing mode RG = Tube BW = 50 ma Snubberless CW = 35 ma Snubberless Figure 13. Ordering information scheme (T16 series) T G (-TR) TRIAC series Current 16 = 16 A Sensitivity 10 = 10 ma 35 = 35 ma Voltage 600 = 600 V 800 = 800 V Package G = D PAK Packing mode Blank = Tube -TR = Tape and reel Table 7. Product selector Voltage (xxx) Device (1) Sensitivity Type Package 600 V 800 V BTA/BTB16-xxxB X X 50 ma Standard TO-0AB BTA/BTB16-xxxBW X X 50 ma Snubberless TO-0AB BTA/BTB16-xxxC X 5 ma Standard TO-0AB BTA/BTB16-xxxCW X X 35 ma Snubberless TO-0AB BTA/BTB16-xxxSW X X 10 ma Logic level TO-0AB T1610-xxxG X X 10 ma Logic level D PAK T1635-xxxG X X 35 ma Snubberless D PAK 1. BTB: non insulated TO-0AB package 6/10 Doc ID 7471 Rev 9

7 BTA16, BTB16, T1610, T1635 Package information 3 Package information Epoxy meets UL94, V0 Recommended torque value: 0.4 to 0.6 N m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. Table 8. D PAK dimensions Ref. Millimeters Dimensions Inches Min. Typ. Max. Min. Typ. Max. L E C A A A B L D B L3 B B A1 C R C C D G E mm min. FLAT ZONE G L V L L R V Figure 14. Footprint (dimensions in mm) Doc ID 7471 Rev 9 7/10

8 Package information BTA16, BTB16, T1610, T1635 Table 9. TO-0AB (non-insulated and insulated) dimensions Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A B C a Ø I b a L B b A b l3 l a1 a c C c c e F e b1 M c ØI I L l l M /10 Doc ID 7471 Rev 9

9 BTA16, BTB16, T1610, T1635 Ordering information 4 Ordering information Table 10. Ordering information Order code (1) Marking (1) Package Weight Base qty Delivery mode BTA16-xxxyzRG BTA16xxxyz TO-0AB.3 g 50 Tube BTB16-xxxyzRG BTB16xxxyz TO-0AB.3 g 50 Tube T1610-xxxG-TR T1610xxxG 1000 Tape and reel T1635-xxxG T1635xxxG D PAK 1.5 g 50 Tube T1635-xxxG-TR T1635xxxG 1000 Tape and reel 1. xxx = voltage, y = sensitivity, z = type 5 Revision history Table 11. Document revision history Date Revision Changes Oct-00 6A Last update. 13-Feb TO-0AB delivery mode changed from bulk to tube. ECOPACK statement added. 03-Jul Added part number T Dec Updated value for V DSM /V RSM in Table. Updated temperature in Table from 15 C to 86 C. Doc ID 7471 Rev 9 9/10

10 BTA16, BTB16, T1610, T1635 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. 009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 10/10 Doc ID 7471 Rev 9

T1235H, T1250H. High temperature 12 A Snubberless Triacs. Features. Applications. Description

T1235H, T1250H. High temperature 12 A Snubberless Triacs. Features. Applications. Description High temperature 12 A Snubberless Triacs Features Medium current Triac 150 C max. T j turn-off commutation Low thermal resistance with clip bonding Very high 3 quadrant commutation capability G A1 Packages