SIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
|
|
- Morris Horton
- 5 years ago
- Views:
Transcription
1 Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series provides a low profile surface solution that enables broadband equipment to comply with global regulatory standards while limiting the impact to broadband signals and board space. eatures and Benefits Agency Approvals Agency Agency ile Number E13383 Pinout Designation Not Applicable Schematic Symbol Low voltage overshoot Low on-state voltage Low capacitance Does not degrade surge capability after multiple surge events within limit. Small footprint Applicable Global Standards TIA-968-A TIA-968-B ITU K.2/21/45 Enhanced Level* ITU K.2/21/45 Basic Level IEC nd edition ails short circuit when surged in excess of ratings RoHS Compliant and Halogen-ree Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(sn (IPC/JEDEC J-STD-69A.1 GR 189 Inter-building* GR 189 Intra-building YD/T 182 YD/T 993 YD/T 95 * A/B-Rated parts require series resistance Electrical Characteristics Part Number = 2.2Amps 2V bias V min V max ma min ma max A max V max p min p max P8Q12ALRP P-8A P3Q12ALRP P3A P64Q12ALRP P6A P72Q12ALRP P7A P9Q12ALRP P9A P11Q12ALRP P11A P13Q12ALRP P13A P15Q12ALRP P15A P18Q12ALRP P18A P23Q12ALRP P23A P26Q12ALRP P26A P31Q12ALRP P31A P35Q12ALRP P35A Absolute maximum ratings measured at T A = 25ºC (unless otherwise noted. - Components are bi-directional. Table continues on next page.
2 Electrical Characteristics (continued Part Number = 2.2Amps 2V bias V min V max ma min ma max A max V max p min p max P8Q12BLRP P-8B P3Q12BLRP P3B P64Q12BLRP P6B P72Q12BLRP P7B P9Q12BLRP P9B P11Q12BLRP P11B P13Q12BLRP P13B P15Q12BLRP P15B P18Q12BLRP P18B P23Q12BLRP P23B P26Q12BLRP P26B P31Q12BLRP P31B P35Q12BLRP P35B Absolute maximum ratings measured at T A = 25ºC (unless otherwise noted. - Components are bi-directional. Surge Ratings Series I pp SM di/dt 2/1µs 1.2/5µs/8/2µs 1/16µs 1/56µs 1/1µs 5 / 6 Hz A min A min A min A min A min A min A/µs max A B Peak pulse current rating (I PP is repetitive and guaranteed for the life of the product. - I PP ratings applicable over temperature range of -4ºC to +85ºC - The component must initially be in thermal equilibrium with -4 C < T J < +15 C Thermal Considerations Package Symbol Parameter Value Unit 3x3 QN T J Operating Junction Temperature Range -4 to +15 C T S Storage Temperature Range -65 to +15 C R JA Thermal Resistance: Junction to Ambient 12 C/W Additional Information Datasheet Resources Samples
3 Temperature SIDACtor Protection Thyristors V-I Characteristics t r x t d Pulse Waveform +I -V I DRM -I +V IPP Peak Pulse Current %IPP 1 5 t r Peak Value Waveform = t r x t d t d t r = rise time to peak value t d = decay time to half value Half Value t Time (µs Normalized Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature Percent of Change % Junction Temperature (T J C (T C = 25ºC C C Ratio of Case Temperature (T C - ºC Soldering Parameters Reflow Condition Pb-ree assembly (see ig. 1 - Temperature Min (T s(min +15 C Pre Heat - Temperature Max (T s(max +2 C - Time (Min to Max (t s 6-18 secs. Average ramp up rate (Liquidus Temp (T L to peak 3 C/sec. Max. T S(max to T L - Ramp-up Rate 3 C/sec. Max. Reflow - Temperature (T L (Liquidus +217 C - Temperature (t L 6-15 secs. T P T L T S(max T S(min Preheat t S igure 1 Ramp-up t P t L Critical Zone TL to TP Ramp-down Peak Temp (T P Time within 5 C of actual Peak Temp (t p Ramp-down Rate Time 25 C to Peak Temp (T P Do not exceed +26(+/-5 C 3 secs. Max. 6 C/sec. Max. 8 min. Max. +26 C 25 time to peak temperature (t 25ºC to peak Time
4 Physical Specifications Environmental Specifications Lead Material Terminal inish Body Material Can be A or B Copper Alloy 1% Matte-Tin Plated UL Recognized epoxy meeting flammability classification V- High Temp Voltage Blocking Temp Cycling Biased Temp & Humidity High Temp Storage Low Temp Storage Thermal Shock Resistance to Solder Heat Moisture Sensitivity Level 8% Rated (V AC Peak +125 C or +15 C, 54 or 18 hrs. MIL-STD-75 (Method C to +15 C, 15 min. dwell, 1 up to 1 cycles. MIL-STD-75 (Method 151 EIA/JEDEC, JESD22-A14 52 V DC (+85 C 85%RH, 54 up to 18 hrs. EIA/ +15 C 18 hrs. MIL-STD-75 (Method C, 18 hrs. C to +1 C, 5 min. dwell, 1 sec. transfer, 1 cycles. MIL-STD-75 (Method 156 JEDEC, JESD22-A C, 3 secs. MIL-STD-75 (Method %RH, +85 C, 168 hrs., 3 reflow cycles (+26 C Peak. JEDEC-J-STD-2, Level 1 Dimensions 3x3 QN TOP VIEW A END VIEW N2 N1 K1 B H J BOTTOM VIEW C SIDE VIEW M1 M2 K2 E 1.5 ( ( (.1 Recommended Soldering Pad Outline (Reference Only Dimensions Inches Millimeters Min Max Min Max A B C E H J K K M M N N Part Numbering Part Marking TYPE P = SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE P xxx Q12 xlrp REEL PACK RoHS COMPLIANT I PP RATING XXXX XXXXX Terminals on Back Part Marking Code (Refer to Electrical Characteristics Table Date code Packing Options Package Type Description Quantity Added Suffix Industry Standard Q12 3x3 QN Tape and Reel Pack 5 RP EIA-481-D
5 Tape and Reel Dimensions 3x3 QN Reel Dimension A K D Tape Leader and Trailer Dimensions END TRAILER 16mm MIN B Tape Dimension Items D T W COVER TAPE P1 C CARRIER TAPE N W1 LEADER 4mm MIN CARRIER TAPE P D1 P2 A COVER TAPE B START E1 E2 W Symbols Description Inches Millimeters Min Max Min Max A Reel Diameter N/A N/A 33. B Drive Spoke Width.59 N/A 1.5 N/A C Arbor Hole Diameter D Drive Spoke Diameter.795 N/A 2.2 N/A N Hub Diameter N/A 5. N/A W 1 Reel Inner Width at Hub A Pocket Width at bottom B Pocket Length at bottom D eed Hole Diameter D 1 Pocket Hole Diameter.59 N/A 1.5 N/A E 1 eed hole position E 2 eed hole position eed hole center-pocket hole K Pocket Depth P eed Hole Pitch P 1 Component Spacing P 2 eed hole center-pocket hole T Carrier Tape Thickness W Embossed Carrier Tape Width W Cover Tape Width Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at
SIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency Pinout Designation Line in Ground Line in Schematic Symbol Line In (1 -Bias
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency gency ile Number The new SEP (SIDCtor Thyristor Ethernet/PoE Protector series
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. MC Multiport Series - MS-013. Description
MC Multiport Series - MS-13 RoHS Pb e3 Description The MC Multiport Series MS-13 are low capacitance SIDCtor thyristors designed to protect broadband equipment from damaging overvoltage transients. The
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Balanced Series - MS-013. Description
SIDCtor Balanced Series - MS- RoHS Pb e Description The SIDCtor Balanced Series MS- are designed to protect baseband equipment from overvoltage transients. The patented Y configuration ensures balanced
More informationTeccor brand Protection Thyristors Surface Mount
Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationDSLP Series - SOT23-6
DSLP Series - SOT23-6 RoHS Pb e3 Description Agency Approvals Agency Agency File Number E133083 This new DSLP Series provides overvoltage protection for applications such as HD-SDI, HD-CVBS, ADSL, ADSL2,
More informationPLEDxUSWxA Series - Unidirectional, White Body
PLEDxUSWxA Series - Unidirectional, White Body RoHS e3 Description Agency Approvals Agency Agency File Number E133083 PLEDxUSWxA open LED protectors provide a switching electronic shunt path when an LED
More informationFeatures. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J
L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C
Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationPLED Unidirectional Series (PLEDxUx)
(PLEDxUx) PLED Open LED Protectors Agency Approvals Agency Agency File Number E133083 Description The (PLEDxUx Series) open LED protectors provide an electronic switching shunt path around a single LED
More informationTeccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C
RoHS Description Excellent unidirectional switches for phase control and general switching applications such as heating, motor control controls, converters / rectifiers and capacitive discharge ignitions.
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet
Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs
LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationPLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
More informationTeccor brand Thyristors Silicon Controlled Rectifiers
Sx02xS EV Series Amp Sensitive SCR Description New Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR s junctions are
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationTeccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)
RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More informationPLEDxUSW Series, Unidirectional, White DO-214AA
PLEDxUSW Unidirectional Series PLEDxUSW Series, Unidirectional, White DO-214AA RoHS Description Agency Approvals Agency Agency File Number E133083 The PLEDxUSW open LED protectors provide an electronic
More informationThyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationThyristors 4 Amp High Temperature Sensitive SCRs. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 130 C 4 A I T(AV)
RoHS Description This SJxx4x high temperature SCR series is ideal for uni-directional switch applications such as phase control in heating, motor speed controls, converters/rectifiers and capacitive discharge
More informationLJxx08xx & QJxx08xHx Series
RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationTeccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs
QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense
More informationLJxx08xx & QJxx08xHx Series
LJxx8xx & QJxx8xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature
More informationDK208D Rectifier Diode
DK208D Rectifier Diode RoHS Description This DK208D 8, 1200V rated standard recovery rectifier diode in a compact TO-252 surface mount package is ideal as a bypass diode or anti-parallel diode for active
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTeccor brand Thyristors Standard Bidirectional DIAC Trigger
Description The HTM, HT, and ST series of bilateral trigger DIACs offer a range of voltage characteristics from 27V to 70V. A DIAC semiconductor is a full-wave or bidirectional Thyristor. It is triggered
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q6012xH1LED Series RoHS Description Q6012LH1LED series is designed to meet low load current characteristics typical in LED lighting applications. By keeping holding current at 8mA maximum, this Triac series
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC
More informationFeatures. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL
Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationFeatures. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More informationKxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSP A Discrete Unidirectional TVS Diode
SP1212 12A Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SP1212 unidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTeccor brand Thyristors High Energy Unidirectional SIDACs
K2xx0yHU Series RoHS Description The new K2xx0yHU is a higher energy SIDC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSP pF 24kV Bidirectional Discrete TVS
SP1312 11pF 24kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1312 bidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationThyristors 30 / 35 Amp Alternistor (High Commutation) Triacs
Qxx30xHx & Qxx35xHx Series RoHS Description The 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationSP3050 Lead-Free/Green Series
RoHS Pb GREEN Description The SP3050 integrates low capacitance rail-to-rail diodes with an additional zener diode to protect each I/O pin against ESD and high surge events. This robust device can safely
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationLightning Surge Protection - SP4031 SP1050 Series 7 (N/C) 6 (N/C)
SP431 RoHS Pb GREEN Description The SP431 hybrid protector offers both overcurrent and differential only overvoltage protection for applications such as 1/1/1 BaseT ports. Compliant with the newest standards
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTeccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV)
HS4040xQx Series RoHS Description The HS4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse
More informationTeccor brand Thyristors 16 Amp Standard SCR V DRM. Symbol Parameter Test Conditions Value Unit V DSM
16 mp Standard SCR RoHS Description The Littelfuse SCR S8016x series are specifically designed for Electric Vehicle On-Board Charger (EVOBC) applications. This SCR C line input rectifier can handle Level
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSymbol Parameter Test Conditions Value Unit RMS on-state current T C = 75 C 0.8 A I T(AV) Average on-state current T C
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationKxxx0yU SIDAC Series. Thyristors Standard Unidirectional SIDACs. RoHS. Description
Standard Unidirectional SIDCs xxx0yu SIDC Series RoHS Description The SIDC is a silicon unilateral voltage triggered switch. Upon application of a voltage exceeding the SIDC breakover voltage point, the
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Schematic Symbol. Samples G
Sxx4xSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current
More informationTeccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation
More informationSP6003 Series 7pF EMI Filter Array with ESD Protection
ESD and EMI Filter Devices - 7pF EMI Filter Array with ESD Protection RoHS Pb GREEN Description Littelfuse s integrates 4 and 6 EMI filters (C-R-C) into a small, low-profile µdfn package with each filter
More informationSP6002 Series 15pF 15kV EMI Filter Array
TVS Diode Arrays (SPA D) ESD and EMI Filter Devices - 15pF 15kV EMI Filter Array RoHS Pb GREEN Description The Littelfuse SP6002 SPA series integrates 4, 6 and 8 EMI filters (C-R-C) into a small, low-profile
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationTeccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description
Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationZener Diode Surface Mount - 1W - SMF47xxA LF RoHS
SMF47xxA Description SMF47xxA Series Zener Diodes are excellent voltage stabilization devices. The Series is designed specifically for Voltage stabilization Voltage regulation, and so on. Zener Diode LF
More informationThyristors 8 Amp Sensitive & Standard SCRs. Sxx08xSx & Sxx08x Series. Description
Sxx08xSx & Sxx08x Series RoHS Description This Sxx08x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
More informationThyristors 25 Amp Standard & Alternistor (High Commutation) Triacs. Qxx25xx & Qxx25xHx Series. Description
Qxx25xx & Qxx25xHx Series RoHS escription This 25 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationAPM8005K. Pin Description. Features. Applications. Ordering and Marking Information. Dual N-Channel Enhancement Mode MOSFET 80V/4.
Dual N-Channel Enhancement Mode MOSFET Features Pin Description 80V/4.7A, R DS(ON) =45mΩ (Typ.) @ V GS = 10V R DS(ON) =55mΩ (Typ.) @ V GS = 5V Reliable and Rugged Lead Free and Green Devices Available
More informationSP1255P Series 0.5pF, 12kV Diode Array for μusb
TVS Diode Arrays (SPA Diodes Low Capacitance ESD and Surge Protection -.pf, 2kV Diode Array for μusb RoHS Pb GREEN Description The SP2P integrates 3 channels of ultra-low capacitance steering diodes and
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationTeccor brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx08xx & Qxx08xx & Qxx08xHx Series RoHS Description 8 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More informationTeccor brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs
escription 25 mp bi-directional solid state switch series is designed for switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static
More informationPackage Code S : SOP-8. Date Code YYXXX WW
N-Channel Enhancement Mode MOSFET Features 100 V/8 A R DS(ON) = 20 m Ω (typ.) @ V GS =10V Avalanche Rated Reliable and Rugged Lead Free and Green DevicesAvailable (RoHS Compliant) Pin Description D D D
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationTeccor brand Thyristors 6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx06xx & Qxx06xx & Qxx06xHx Series RoHS Description 6 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationTISP4G024L1W G.Fast VDSL Protector
*RoHS COMPLIANT U80L Features n Low capacitance n Low distortion n Surge protection n RoHS compliant* Applications n G.Fast equipment n xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More information5.0SMDJxxS Series, Single Chip Design
5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More informationPin Description. Features. Ordering and Marking Information. Dual Enhancement Mode MOSFET (N- and P-Channel) N-Channel 20V/8A, R DS(ON)
Dual Enhancement Mode MOSFET (N- and ) Features Pin Description V/8A, R DS(ON) =mω(typ.) @ =.5V R DS(ON) =3mΩ(typ.) @ =.5V -V/-.3A, R DS(ON) =8mΩ(typ.) @ =-.5V R DS(ON) =5mΩ(typ.) @ =-.5V Super High Dense
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More informationFeatures. Ordering and Marking Information. Dual Enhancement Mode MOSFET (N- and P-Channel) N-Channel 20V/3A, R DS(ON)
Dual Enhancement Mode MOSFET (N- and P-Channel) Features Pin Description N-Channel 20V/3A, =50mΩ(typ.) @ =4.5V =65mΩ(typ.) @ =2.5V P-Channel -20V/-2A, =90mΩ(typ.) @ =-4.5V =30mΩ(typ.) @ =-2.5V Reliable
More informationPackage Code. Handling Code. Assembly Material
P-Channel Enhancement Mode MOSFET Features Pin Description -2V/-4.9A, R DS(ON) =43mΩ (Max.) @ V GS =-4.5V R DS(ON) =58mΩ (Max.) @ V GS =-2.5V R DS(ON) =88mΩ (Max.) @ V GS =-1.8V 1% UIS + R g Tested Reliable
More information