Transient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
|
|
- Darren Anderson
- 5 years ago
- Views:
Transcription
1 Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency Approvals AGENCY AGENCY FILE NUMBER E866/E353 Ratings and Thermal Characteristics (T A =5 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation by xμs test waveform (Fig. (Note P PPM 6 W Steady State Power Dissipation on inifinite heat sink at =75ºC (Fig. 5 Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only (Note Instantaneous Forward Voltage at 5A for Unidirectional only (Note 3 Operating Junction and Storage Temperature Range Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient P D 5. W I FSM A V F 3.5/5. V T J, T STG -55 to 75 C R ujl C/W R uja 75 C/W Notes:. Non-repetitive current pulse, per Fig. 3 and derated above T A = 5 O C per Fig... Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. V F <3.5V for devices of V BR _< V and V F < 5.V for devices of V BR _> V. Features Halogen-Free RoHS compliant Typical maximum temperature coefficient ΔV BR =.% x V C x ΔT Glass passivated chip junction in DO-5 Package 6W peak pulse capability at μs waveform, repetition rate (duty cycles:.% Fast response time: typically less than.ps from Volts to BV min Excellent clamping capability Applications Low incremental surge resistance Typical I R less than μa above 3V High temperature soldering guaranteed: 6 C/4 seconds /.375,(9.5mm lead length, 5 lbs., (.3kg tension Plastic package has Underwriters Laboratory Flammability classification 94V-O Matte Tin Lead free plated TVS devices are ideal for the protection of I/O interfaces, V CC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Revision: November 6,, 5:6 Littelfuse, Inc.
2 Axial Leaded 6W > P6KE series Electrical Characteristics Part Number (Uni Part Number (Bi Reverse Stand off Voltage V R (Volts Breakdown Voltage V BR I T MIN MAX Test Current I T (ma Clamping Voltage V I pp (V Peak Pulse Current I pp (A Reverse Leakage I V R (µa P6KE6.8A P6KE6.8CA X P6KE7.5A P6KE7.5CA X P6KE8.A P6KE8.CA X P6KE9.A P6KE9.CA X P6KEA P6KECA X P6KEA P6KECA X P6KEA P6KECA X P6KE3A P6KE3CA X P6KE5A P6KE5CA X P6KE6A P6KE6CA X P6KE8A P6KE8CA X P6KEA P6KECA X P6KEA P6KECA X P6KE4A P6KE4CA X P6KE7A P6KE7CA X P6KE3A P6KE3CA X P6KE33A P6KE33CA X P6KE36A P6KE36CA X P6KE39A P6KE39CA X P6KE43A P6KE43CA X P6KE47A P6KE47CA X P6KE5A P6KE5CA X P6KE56A P6KE56CA X P6KE6A P6KE6CA X P6KE68A P6KE68CA X P6KE75A P6KE75CA X P6KE8A P6KE8CA X P6KE9A P6KE9CA X P6KEA P6KECA X P6KEA P6KECA X P6KEA P6KECA X P6KE3A P6KE3CA X P6KE5A P6KE5CA X P6KE6A P6KE6CA X P6KE7A P6KE7CA X P6KE8A P6KE8CA X P6KEA P6KECA X P6KEA P6KECA X P6KE5A P6KE5CA X P6KE3A P6KE3CA X P6KE35A P6KE35CA X P6KE4A P6KE4CA X P6KE44A P6KE44CA X P6KE48A P6KE48CA P6KE5A P6KE5CA P6KE53A P6KE53CA P6KE54A P6KE54CA P6KE55A P6KE55CA P6KE6A P6KE6CA For bidirectional type having V R of volts and less, the I R limit is double. For parts without A, the V BR is ± % and V C is 5% higher than with A parts Agency Approval Revision: November 6,, 5:6 Littelfuse, Inc.
3 Axial Leaded 6W > P6KE series Ratings and Characteristic Curves (T A =5 C unless otherwise noted Figure - Peak Pulse Power Rating Figure - Pulse Derating Curve P PPM - Peak Pulse Power (kw. Non-repetitive Pulse Waveform shown in Fig 3. T A =5ºC.µs.µs µs µs.ms ms Peak Pulse Power (P PP or Current (I PPM Derating in Percentage, % t d - Pulse Width (sec. T A - Ambient Temperature ( o C Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance Uni-Directional I PPM - Peak Pulse Current, % I RSM 5 5 td tr=µsec Peak Value IPPM Half Value IPPM IPPM ( TJ=5 C Pulse Width(td is defined as the point where the peak current decays to 5% of IPPM /µsec. Waveform as defined by R.E.A t-time (ms Cj (pf Bi-directional V=V Uni-directional V=V Tj=5C f=.mhz Vsig=5mVp-p.... V BR - Reverse Breakdown Voltage (V Figure 5 - Steady State Power Derating Curve Figure 6 - Non-Repetitive Forward Surge Current 6 Steady State Power Dissipation (W L =.375 (9.5mm Lead Lengths I FSM - Peak Forward Surge Current (A Lead Temperature(ºC Number of Cycles at 6 Hz 3 Revision: November 6,, 5:6 Littelfuse, Inc.
4 Temperature (T Transient Voltage Suppression Diodes Axial Leaded 6W > P6KE series Soldering Parameters Reflow Condition Lead free assembly t p T P Pre Heat - Temperature Min (T s(min 5 C - Temperature Max (T s(max C Ramp-up t L Critical Zone to T P - Time (min to max (t s 6 8 secs T s(max Average ramp up rate (Liquidus Temp ( to peak T S(max to - Ramp-up Rate 3 C/second max 3 C/second max T s(min t s Preheat Ramp-down Reflow - Temperature ( (Liquidus 7 C - Time (min to max (t s 6 5 seconds 5 C t 5 C to Peak Time (t Peak Temperature (T P 6 +/-5 C Time within 5 C of actual peak Temperature (t p 4 seconds Flow/Wave Soldering (Solder Dipping Ramp-down Rate 6 C/second max Peak Temperature : 65 O C Time 5 C to peak Temperature (T P 8 minutes Max. Dipping Time : seconds Do not exceed 8 C Soldering : time Physical Specifications Environmental Specifications Weight.5oz.,.4g Temperature Cycle JESD-A4 Case JEDEC DO-4AC (DO-5 molded plastic body over passivated junction. Pressure Cooker JESD -A Polarity Color band denotes the cathode except Bipolar. High Temp. Storage JESD-A3 Terminal Matte Tin axial leads, solderable per JESD-BD. HTRB JESD-A8 Thermal Shock JESD-A6 Dimensions A D B DO-4AC (DO-5 A C Dimensions Inches Millimeters Min Max Min Max A B C D Revision: November 6,, 5:6 Littelfuse, Inc.
5 Axial Leaded 6W > P6KE series Part Numbering System Part Marking System P6KE xxxxxx OPTION CODE: BLANK Reel Tape -B Bulk Packaging TYPE CODE: A Uni-Directional (5% Voltage Tolerance CA Bi-Directional VOLTAGE CODE (Refer to the Electrical Characteristics table SERIES CODE Cathode Band Littelfuse Logo P6KEXXX F YYWW Trace Code Marking Product Type Packaging Part Number Component Package Quantity Packaging Option Packaging Specification P6KExxxXX DO-4AC 4 Tape & Reel EIA STD RS-96E P6KExxxXX-B DO-4AC BULK Littelfuse Concord Packing Spec. DM-6 Tape and Reel Specification.56 (65. Off Center either side.39(..6 ( (.6 Dimensions are in inches/mm.48 (..5 ( ( ( ( (7.7 Recess Depth Max..75 (9.5 Direction of Feed 5 Revision: November 6,, 5:6 Littelfuse, Inc.
Transient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series
Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More information5.0SMDJxxS Series, Single Chip Design
5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More informationTransient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series
Surface Mount 4W > SMAJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series
Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More information1KSMB Series. Transient Voltage Suppression Diodes. Surface Mount 1000W > 1KSMB series. Uni-directional. Description
Surface Mount W > KSMB series KSMB Series RoHS Pb e3 Uni-directional Description Bi-directional The KSMB series is designed specifically to protect sensitive electronic equipment from voltage transients
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationAutomotive Electrical Overvoltage Transient Suppressors Leaded - > ATH series
Automotive Electrical Overvoltage Transient Suppressors Leaded - > ATH series Description Overvoltage transient suppressors are designed for applications requiring a low voltage rectifier with reverse
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationTPSMD Series. TVS Diodes Surface Mount 3000W > TPSMD series. Description
TPSMD Series RoHS Pb e3 Description Bi-directional The TPSMD series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationZener Diode Surface Mount - 1W - SMF47xxA LF RoHS
SMF47xxA Description SMF47xxA Series Zener Diodes are excellent voltage stabilization devices. The Series is designed specifically for Voltage stabilization Voltage regulation, and so on. Zener Diode LF
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationSMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationAutomotive Electrical Overvoltage Transient Suppressors Leaded - > ATN series
Automotive Electrical Overvoltage Transient Suppressors Leaded - > ATN series Description Overvoltage transient suppressors are designed for applications requiring a low voltage rectifier with reverse
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationTransient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR series. Bi-directional. Features V BR 3000 W 6.5 W 300 A 3.5 V.
RoHS Uni-directional Description Bi-directional The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTPSMC-VR Series. TVS Diodes Surface Mount 1500W > TPSMC-VR series Series. Description. Uni-directional. Bi-directional
TPSMC-VR Series Description RoHS Pb e3 The TPSMC-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationZetron Research. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. SMCJ Series. SMCJ Series
RoHS Agency Approvals AGENCY Parameter Symbol Value Unit Peak Pulse Power Dissipation at T A =25ºC by xμs waveform (Fig.)(Note ), (Note 2) P PPM 5 W Power Dissipation on infinite heat sink at T A =5 O
More informationTransient Voltage Suppressors. SMBJ Series. Circuit Protection System
Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationSMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppressors Diodes
Transient Voltage Suppressors Diodes Surface Mount - 6W > SMBJ5.~44CA Series The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationTransient Voltage Suppressors. SMAJ Series. Circuit Protection System
Transient Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA above 10V Compatible
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More informationSMDJ-HR Series. Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR Series. Description. Uni-directional
SMDJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationS M A J x x x C A. Reverse Stand-Off Voltage
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Fast response time
More informationSurface Mount Transient Voltage Suppressors
TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems.
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More informationSMBJ-HRA Series. Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HRA Series. Description. Uni-directional
SMBJ-HRA Series RoHS Pb e3 Uni-directional Bi-directional Description The SMBJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More information20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationMCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationGLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More information1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTeccor brand Protection Thyristors Surface Mount
Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More information