500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
|
|
- Sylvia Booker
- 5 years ago
- Views:
Transcription
1 Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction Excellent clamping capability Low incremental surge resistance 500W Peak Pulse Power capability on 10/1000 μs waveform repetition Rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR for Uni-directional and 5.0ns for Bi-directional Excellent clamping capability Low incremental surge resistance Typical I R less than 1mA above 10V High temperature soldering guaranteed 265 C/10 seconds /.037" (9.5mm) lead length, 5lbs (2.3kg),tension This series is UL recognized under component index. File number E RoHS Compliant DO204AC (DO-15) Mechanical Data Case: JEDEC DO-15 molded plastic body over passivated junction Epoxy: Plastic package has UL flammability classification 94V-0 Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Mounting position: Weight: Cathode indicated by color band except Bi-directionals Any Ounce, 0. 4 gram TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 7
2 Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value Unit Conditions PPPM Peak Pulse Power Dissipation on 10/1000µs waveform 500 W Non-repetitive current pulse, per Fig. 3 and derated above TA=25 C per Fig.2 IPPM Peak Pulse current on 10/1000µs waveform See Table A Non-repetitive current pulse PM(AV) Steady State Power Dissipation 3 W IFSM Peak Forward Surge Current 70 A VF RθJA Maximum Instantaneous Forward Voltage at 35A for Unidirectional only Typical Thermal Resistance Junction to Ambient 3.5/5.0 V 75 C/W TL= 75 C with lead lengths or (9.5mm) 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VF<3.5V for devices of VBR 200V and VF<5.0V for devices of VBR 201V. RθJL TJ,TSTG Typical Thermal Resistance Junction to Lead Operating and Storage Temperature Range 20 C/W -55 to 175 C Electrical Characteristics (T Ambient=25ºC unless noted otherwise) P/N Stand-Off Voltage Breakdown Test Curr. Clamping IPPM Peak Pulse Current Reverse Leakage V WM VBR IT Uni-Polar Bi-Polar VWM (Volts) Min. (ma) VC (Volts) IPPM (Amps) ID (µa) (note1) SA5.0A SA5.0CA SA6.0A SA6.0CA SA6.5A SA6.5CA SA7.0A SA7.0CA SA7.5A SA7.5CA SA8.0A SA8.0CA SA8.5A SA8.5CA SA9.0A SA9.0CA SA10A SA10CA SA11A SA11CA SA12A SA12CA SA13A SA13CA SA14A SA14CA Page 2 of 7
3 P/N Stand-Off Voltage Breakdown Test Curr. Clamping IPPM Peak Pulse Current Reverse Leakage V WM VBR IT Uni-Polar Bi-Polar VWM (Volts) Min. (ma) VC (Volts) IPPM (Amps) ID (µa) (note1) SA15A SA15CA SA16A SA16CA SA17A SA17CA SA18A SA18CA SA20A SA20CA SA22A SA22CA SA24A SA24CA SA26A SA26CA SA28A SA28CA SA30A SA30CA SA33A SA33CA SA36A SA36CA SA40A SA40CA SA43A SA43CA SA45A SA45CA SA48A SA48CA SA51A SA51CA SA54A SA54CA SA58A SA58CA SA60A SA60CA SA64A SA64CA SA70A SA70CA SA75A SA75CA SA78A SA78CA SA85A SA85CA SA90A SA90CA SA100A SA100CA SA110A SA110CA SA120A SA120CA SA130A SA130CA SA150A SA150CA SA160A SA160CA SA170A SA170CA SA180A SA180CA Page 3 of 7
4 Note: 1. For Bi-directional type having VWM of 10V or less, the ID limit is double. 2. For parts without A, the VBR is +/- 10%. Typical Characteristics Curves PPPM - Peak Pulse Power (KW) Fig.1- Peak Pulse Power Rating Curve Peak Pulse Power (PPP) or Current (IPP) Pulse Fig.2- Pulse Derating Curve Pulse Width td (s) Ambient Temperature Ta ( C ) Fig.3- Pulse Waveform Fig.4- Typical Junction Capacitance CJ Capacitance (pf) IPPM - Peak Pulse Current, % IRSM Derating in Percentage, % Time t (ms) Reverse Breakdown Voltage VBR (V) Page 4 of 7
5 Steady State Power Dissipation (W) 500W Glass Passivated Junction Transient Voltage Suppressor Fig.5- Steady State Power Derating Curve IFSM Peak Forward Surge Current (A) Fig.6- Non-Repetitive Forward Surge Current Uni-directional only Lead Temperature TL ( C ) Number of Cycles at 60 Hz Marking Information Uni-directional Bi-directional Page 5 of 7
6 Dimensions in inches (mm) How to Order DO-15 SA xxx CA - xx RG30 Packing Code TR30: 13 Tape & Reel, RoHS RG30: 13 Tape & Reel, RoHS & Halogen Free Factory Location Code Directional Code: A: Uni-directional CA: Bi-directional Stand-Off Voltage Taitron 500W TVS Page 6 of 7
7 How to contact us USA HEADQUARTERS WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH 6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C. Tel: Fax: TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION SUITE 1503, METROBANK PLAZA, 1160 WEST YAN AN ROAD, SHANGHAI, , CHINA Tel: Fax: Page 7 of 7
20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
More informationSymbol Description Value Unit Conditions. Minimum 600
600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More information1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) TCDU1WW. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)
1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) 1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) Features Sintered glass passivated (SGP ) rectifier chip Low Profile with Chip Package
More information5000W Surface Mount Transient Voltage Suppressor
5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent
More informationTerminals: Pure Tin plated (Lead-Free), solderable per MIL-STD-750, Method 2026 TCDU 1JW TCDU 1KW. 1.0 A See Fig A. 50 µa TA=125 C.
1.0A Sintered Glass Passivated Ultra Fast Low Profile Rectifier (SGP ) 1DW 1MW 1.0A Sintered Glass Passivated Ultra Fast Low Profile Rectifier (SGP ) Features Qualified to AEC-Q101 standards for high reliability
More information2.0A Low Profile Chip Schottky Rectifier TSCDA24LH. Features. Application. Mechanical Data
2.0A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Lead-free solder joint, no wire bond & lead frame Low power loss, High efficiency High current capability, Low voltage
More informationTSCDB52 TSCDB54 TSCDB56 TSCDB510
5A Low Profile Chip Schottky Rectifier 5A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Low power loss, High efficiency High current capability, Low voltage drop Plastic
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationSMCJ5.0CA Thru SMCJ170CA
Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationStandard 12A Silicon Controlled Rectifier TCR12FWMT. Features. Mechanical Data. Maximum Ratings
Standard 12A Silicon Controlled Rectifier Standard 12A Silicon Controlled Rectifier Features Sensitive gate triggering with low gate current drive Glass Passivated die junctions High surge current capability
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationM C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationExceeds carbon comp MIL-R-11 performance Bulk and 52mm tape and reel standard, cut and formed, or radial Panasert/Avisert available upon request
Carbon Film Resistor Normal & Miniature Style & S Series Carbon Film Resistor Normal & Miniature Style Features Low cost Excellent long-term stability Tolerance: ±2%, ±5% RoHS compliant and halogen free
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationBulk and 52mm tape and reel standard; ammo pack, cut and formed, and radial Panasert/Avisert available upon request. Outline Type L ΦD H Φd
Metal Glazed Film Resistor High Voltage & High Ohmic Type Metal Glazed Film Resistor High Voltage & High Ohmic Type Features Low cost High resistance range (100KΩ to 100MΩ) Standard tolerance: ±1%, ±5%
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationTVT05LCW TVT12LCW TVT15LCW TVT24LCW
Features Low Capacitance Unidirectional TVS This Transient Voltage Suppressor is intended to Protect Sensitive Equipment against Electrostatic Discharge and Transient Events as well to offer a Minimum
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationMCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More information8mm Oval Lamp LED TLH-Q1E8-HKKK. 8mm Oval Super Red LED. Features. Applications. Device Selection Guide
8mm Oval Lamp LED 8mm Oval Super Red LED Features Oval shape package High brightness Wide viewing angle UV resistant epoxy RoHS compliance 8mm Applications Indoor/outdoor application Indicator application
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More informationLow Power LM321N5. Low Power Single Operational Amplifier. General Description. Features. Applications
Low Power Single Operational Amplifier Low Power Single Operational Amplifier General Description The is a high gain and internally frequency compensated operational amplifier specifically designed to
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationP-600. Mechanical Dimensions:In Inches (mm) China - Germany - Korea - Singapore - United States - smc-diodes.
Features: Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass Passivated Junction 15000W Peak Pulse Power Capability on 10/1000 μs waveform Voltage-17.0 to 280 Volts Excellent
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationSMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features SMA Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions
More informationSA Series. Working Voltage: 5.0 to 190 V Peak Pulae Power: 500 W 500W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DO-15 PACKAGE
Working : 5.0 to 190 V Peak Pulae Power: 500 W Features Glass passivated chip 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
More informationDO-15 China - Germany - Korea - Singapore - United States - smc-diodes.com
P6KE SERIES TRANSIENT VOLTAGE SUPPRESSOR Features: Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 6.8V- 440V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More information3mm Dome Power LED TLH-Q1W QS. Features. Descriptions. Applications. Device Selection Guide
3mm Dome Power LED Features High flux output Low profile Low thermal resistance Design for high current operation Packaged in Tubes for use with automatic insertion equipment RoHS Compliance Piranha Descriptions
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More information1206 Reverse Package Super Red LED TSP3-QF3216A3. Features. Descriptions. Applications. Device Selection Guide
1206 Reverse Package Super Red LED 1206 Reverse Package Super Red LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase
More informationEnhancement Mode MOSFET (N-Channel) 2N7002K. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) SOT-23
Enhancement Mode MOSFET (N-Channel) Enhancement Mode MOSFET (N-Channel) Features ESD Protected 2000V High density cell design for low R DS(ON) Voltage controlled small signal switch Rugged and reliable
More information400W, 10V - 100V Surface Mount Transient Voltage Suppressor
400W, 10V - V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q101 qualified Low profile package Photo Glass passivated junction Excellent clamping capability Moisture sensitivity level: level
More informationSMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More information6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More informationEnhancement Mode MOSFET (N-Channel) 2N7002E. Features. Mechanical Data. Maximum TA=25 C unless noted otherwise SOT-23
Enhancement Mode MOSFET (N-Channel) Enhancement Mode MOSFET (N-Channel) Features High density cell design for low RDS(ON). Voltage controlled small signal switch Rugged and reliable High saturation current
More information* Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 R2500F R3000F R4000F R5000F VRRM VRMS VDC IFSM. I 2 t 3.
HIGH VOLTAGE FAST RECOVER RECTIFIER R25F THRU R5F VOLTAGE RANGE 25 to 5 CURRENT.2 Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 MECHANICAL DATA * Case:
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationBZW04 Series. Features: DO-41. Mechanical Data. Page <1> 14/05/08 V1.1
DO-41 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 400W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low impedancesurge resistance.
More information1206 Reverse Package Super Blue LED TSP3-BF3216-N1P2. Features. Descriptions. Applications. Device Selection Guide
1206 Reverse Package Super Blue LED 1206 Reverse Package Super Blue LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor
More informationGLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
More information400V/18A POWER MOSFET (N-Channel) MSU18N40T. 400V/18A Power MOSFET (N-Channel) General Description. Features. Pin Configuration and Symbol TO-220
400V/18A POWER MOSFET (N-Channel) 400V/18A Power MOSFET (N-Channel) General Description is a N-Channel enhancement mode power MOSFET with advanced technology. It is designed to have Better characteristics,
More informationP6SMB Transient Voltage Suppressor Diode Series
P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More information1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6358 1N637 or Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N637 are JEDEC registered selections
More informationLCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.
Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect
More informationASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF
SMJ.0(C)-HF Thru. SMJ440(C)-HF Working Peak :.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free Features - 400W peak pulse power capability with a 0/000µs waveform, repetitive rate (duty
More informationEnhancement Mode MOSFET (Double N-Channel) 2N7002KDWS. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) SOT-363
Enhancement Mode MOSFET (Double N-Channel) Enhancement Mode MOSFET (Double N-Channel) Features Advanced Trench Process Technology High density cell design for low R DS(ON) Very low leakage current in off
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More information5.0SMDJxxS Series, Single Chip Design
5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More information