BZW04 Series. Features: DO-41. Mechanical Data. Page <1> 14/05/08 V1.1
|
|
- Robert Singleton
- 5 years ago
- Views:
Transcription
1 DO-41 Features: Plastic package. Exceeds environmental standards of MIL-STD W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low impedancesurge resistance. Very fast response timev. Typical I R less than 1µA above 10V. High temperature soldering guaranteed: 260 C/10 seconds/0.375 inch (9.5mm) lead length/5lbs. (2.3kg) tension. Dimensions : Inches (Millimetres) Mechanical Data Case : Molded plastic. Lead : Axial leads, solderable per MIL-STD-202, Method 208. Polarity : Color band denotes cathode except bipolar. Weight : 0.34 gram. Page <1> 14/05/08 V1.1
2 Ratings and Electrical Characteristics (T A = 25 C) Type Number Symbol Value Units Peak Pulse Power Dissipation at T A = 25 C, T p = 1ms (Note 1) P PP Minimum 400 Steady State Power Dissipation at T L = 75 C Lead Lengths Inch 9.5mm (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) P D 1.0 Watts I FSM 40 Amps Junction to Leads R θjl 60 Junction to Ambient on Printed Circuit. L Lead = 10mm R θja 100 Operating and Storage Temperature Range T J, T STG -65 to C C/W 1. Non-repetitive current pulse, per derated above T A = 25 C. 2. Mounted on copper pad area of 1.6 x 1.6 inch (40 x 40mm). 3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Ratings and Characteristic Curves Peak Pulse Power Rating Curve Pulse Derating Curve P PPM, Peak Pulse Power, KW t p, Pulse Width, seconds Peak Pulse Power (P pp ) or Current (IPPM) Derating In Percentage, % T A Ambient Temperature, C Clamping Power Pulse Waveform Steady State Power Derating Curve Peak Pulse Current - % PM (AV), Steady State Power Dissipation, Watts t, Time, ms T L, Lead Temperature, C Page <2> 14/05/08 V1.1
3 I FSM, Peak Forward Surge Current, Amperes Non-Repetitive Forward Surge Current Unidirectional Only Number of Cycles at 60Hz I D, Instantaneous Reverse Leakage Current, Microamperes Typical Reverse Leakage Characterastics Typical Junction Capacitance Unidirectional C, Junction Capacitance (pf) V (BR), Breakdown Voltage, Volts Page <3> 14/05/08 V1.1
4 Electrical Characteristics (T A =25 C unless otherwise noted) Device Breakdown Voltage V BR at I R (V) (1) Unidirectional Bidirectional Minimum Test Current I T (ma) Stand-off Voltage V WM (Volts) Reverse Leakage at V WM Io (ua) (3) Peak Pulse Current I PPM (Amps) Clamping Voltage at I PPM Vc (Volts) Temperature Coefficient of V (BR) (%/ C) BZW04-11 BZW04-11B BZW BZW04-128B BZW04-13 BZW04-13B BZW04-14 BZW04-14B BZW BZW04-145B BZW04-15 BZW04-15B BZW BZW04-154B BZW04-17 BZW04-17B BZW BZW04-171B BZW04-19 BZW04-19B BZW04-20 BZW04-20B BZW04-23 BZW04-23B BZW04-26 BZW04-26B BZW04-28 BZW04-28B BZW04-31 BZW04-31B BZW BZW04-342B BZW BZW04-376B BZW04-40 BZW04-40B BZW04-44 BZW04-44B BZW04-48 BZW04-48B BZW04-64 BZW04-64B BZW04-85 BZW04-85B Pulse test: tp <50ms. 2. All terms and symbols are consistent with ANSI/IEEE C For bidirectional types having V WM of 10 volts and less, the I D limit is doubled. Page <4> 14/05/08 V1.1
5 International Sales Offices: AUSTRALIA Farnell Tel No: Fax No: FINLAND Farnell Tel No: Fax No: ITALY Farnell Tel No: Fax No: SPAIN Farnell Tel No: Fax No: AUSTRIA Farnell Tel No: Fax No: FRANCE Farnell Tel No: Fax No: MALAYSIA Tel No: Fax No: SWEDEN Farnell Tel No: Fax No: BELGIUM Farnell Tel No: Fax No: GERMANY Farnell Tel No: Fax No: NETHERLANDS Farnell Tel No: Fax No: SWITZERLAND Farnell Tel No: Fax No: BRAZIL Tel No: Fax No: HONG KONG Tel No: Fax No: NEW ZEALAND Farnell Tel No: Fax No: UK Farnell Tel No: Fax No: CHINA Tel No: Fax No: HUNGARY - Farnell NORWAY Farnell Tel No: Fax No: UK CPC CZECH REPUBLIC - Farnell INDIA - Farnell PORTUGAL Farnell Tel No: Fax No: USA Newark Tel No: DENMARK Farnell Tel No: Fax No: IRELAND Farnell Tel No: Fax No: RUSSIA Farnell export EXPORT Farnell Tel No: Fax No: For enquiries from all other markets ESTONIA Farnell Tel No: Fax No: ISRAEL Farnell Tel No: Fax No: SINGAPORE Tel No: Fax No: Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. Premier Farnell plc Page <5> 14/05/08 V1.1
BZW06- Series DO-15. Mechanical Data. Page <1> 14/05/08 V1.1
DO-15 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 600W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low zener impedance.
More informationMBR10xCT Series TO-220AB
10x Series Features: Plastic material. Metal silicon junction, majority carrier conduction. Low power loss, high efficiency. High current capability, low forward voltage drop. High surge capability. For
More informationP600 Series 6A Power Diodes
Standard Axial Rectifiers Features: High surge current capability. Void-free plastic in a P600 package. High current operation 6.0 Amperes at T A = 55 C. Exceeds environmental standards of MIL-S-19500/228.
More informationS3 Series. Standard Recovery Power Diodes. Features: Mechanical Data: SMC/DO-214AB. Foot Print. Dimensions. Page 1 27/03/06 V1.0
Features: For surface mounted application. Glass passivated junction chip. Low forward voltage drop. Easy pick and place. High surge current capability. High temperature soldering: 250 C/10 seconds at
More informationTIP120, 121, 122, 125, 126, 127 Darlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications. Collector-Emitter sustaining voltage-v CEO(sus) = 60V (Minimum) - TIP120, TIP125 80V (Minimum) - TIP121, TIP126 100V
More informationMJ15022 / MJ15024 Power Transistors
The and MJ15024 are silicon power base power transistors designed for high power audio, disk head positioners and other linear applications. Features: High Safe Operating Area. High DC Current Gain h FE
More informationBU426A Power Transistor
High Voltage Switching BU426A type is a fast switching high voltage transistor, more specially intended for operating in colour TV supply systems. Features: Collector-Emitter sustaining voltage - V CEO(sus)
More information2N6668 Darlington Power Transistor
Plastic Medium-Power Silicon Transistors are designed for general-purpose amplifier and low speed switching applications. Features: Collector-Emitter Sustaining Voltage V CEO(sus) = 80V (Minimum). Collector-Emitter
More informationBUV48A Power Transistor
High Voltage Switching Switchmode Series NPN s are designed for use in high-voltage, highspeed, power switching regulators, converters, inverters, motor control system application. Features: Collector-Emitter
More informationMJ15003, MJ A Complementary Power Transistors
The MJ15003 and MJ15004 are power base power transistors designed for high power audio, disk head positioners, linear amplifiers, switching regulators and other linear applications. Features: High Power
More informationEncapsulated Transformers 115V + 115V Primary, Low Profile
Features: Robust construction. Wide range of secondary voltages available. Single voltage and Dual voltage secondary combination. 2.0VA up to 52VA. CE marked. Designed and manufactured according to international
More informationMJE13005 Power Transistor
Switchmode Series NPN s are designed for use in high-voltage, high-speed, power switching in inductive circuits, they are particularly suited for 115 and 220V switchmode applications such as switching
More informationMJ11032, Darlington Power Transistors
Complementary Silicon Power Darlington Transistors are designed for use as output devices in complementary general purpose amplifier applications. Features: High Gain Darlington performance. High : h FE
More informationDE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:
EN - For pricing and availability in your local country please visit one of the below links: DE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:
More information2N6054/2N6056 Darlington Transistors
Features: General-purpose power amplifier and low frequency switching applications. Low Collector-Emitter Saturation Voltage - V CE(SAT) = 2.0V (Maximum) at I C = 4.0A = 3.0V (Maximum) at I C = 8.0A Monolithic
More informationLPR Series PCB Snap-In Large Capacitors
Features: LPR series large size capacitors with the specially designed self-standing" terminals can be directly soldered to printed circuit boards without holders. Easy fixing to PCBs without need for
More informationHRS2 Series PCB Relays
Features: Low profile. Fully sealed. Standard and sensitive coil versions. DPCO contacts. Specifications: Coil Data: Nominal Voltage : 3V dc to 24V dc. Nominal Power Consumption : 150 to 360mW. Contact
More information2N4401 & 2N4403 General Purpose Switching Transistors
Features: NPN/PNP Silicon Planar Epitaxial Transistors. General purpose Switching Applications. 2N 4401 Type NPN. 2N 4403 Type PNP. 2N4401 NPN TO92 2N4403 PNP Dimensions Minimum Maximum A 4.32 5.33 B 4.45
More informationUltraminiature Rocker&Lever Switches V ac or dc
Specifications: Contact Rating Mechanical Life Contact Resistance Minimum Insulation Resistance Dielectric Strength Operating Temperature Materials: Case and Bushing Switch Support Contacts/Terminals :
More informationTM-533-T/R TACT Switches
Features: Sharp click feel with a positive tactile feed-back. Due to small movement distance (stroke), user experiences distinct sensation when the switch clicks into place. Ultraminiature and light weight
More information2N2222A High Speed Switching Transistor
High Speed Switching Transistor Features: NPN Silicon Planar Switching Transistor. Fast switching devices exhibiting short turnoff and low saturation voltage characteristics. Switching and Linear application
More informationDIL Switches Low Profile
NDI Features: Single pole single throw DIL switches. Splay terminals allow for automatic insertion by IC insertion machine. Insert moulding of terminals and ultrasonic welding improve flux proofness and
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationSMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band.
SMA/DO-214AC Features: For surface mounted application. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time : typically less than 1.0ps
More informationSMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.
Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationBZW06-5V8/376 BZW06-5V8B/376B
BZW06-5V8/376 BZW06-5V8B/376B TRANSIL TM FEATURES PEAK PULSE POWER : 600 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 5.8V to 376 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL
More informationSymbol Parameter Value Unit. Maximum lead temperature for soldering during 10s at 5mm from case
BZW50-10,B/180,B TRANSIL TM FEATURES PEAK PULSE POWER : 5000 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 10V to 180V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL RECOGNIZED DESCRIPTION
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationEquipment Wire. Specification: Primary Insulation Material : PVC. Specification Table. Page 1 16/04/08 V1.1. Reel Conductor Conductor Length (m)
Specification: Material : PVC. Brown BLACK M BROWN M RED M ORANGE M 0.078 0 1.05 0.3 0.5 10/0.1 YELLOW M GRN M BLUE M GREY M WHT M PINK M 0.22 1.2 1.4 7/0.2 BK Page 1 16/04/08 V1.1 Brown BN RD OE YW GN
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationTIP120, 121, 122, 125, 126, 127
Features: Collector - emitter sustaining voltage - V CEO (sus) = 60 V (minimum) - TIP120, TIP125 80 V (minimum) - TIP121, TIP126 100 V (minimum) - TIP122, TIP127 Collector - emitter saturation voltage
More informationNo-Clean Flux Lead Free Tin/Silver/Copper Alloy
Features: Halide free version-typ 400. Mild odour. Fast soldering-range of activities to suit all applications. Clear residues. Good spread on copper, brass and nickel. Heat stable-low spitting. Multicomp
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More information1N5908 SM5908. Transil. Features. Description. Complies with the following standards. Peak pulse power: Stand off voltage: 5 V Unidirectional
1N5908 SM5908 Transil Features Peak pulse power: 1500 W (10/1000 μs) Stand off voltage: 5 V Unidirectional A A Operating T jmax : 175 C High power capability at T jmax : 1500 W (10/1000 µs) JEDEC registered
More informationSMA6F. High junction temperature Transil. Features. Description. Complies with the following standards
High junction temperature Transil Features ECOPACK 2 compliant product Peak pulse power: 600 W (10/1000 µs) 4 kw (8/20 µs) Stand off voltage: 5, 12 or 13 V Unidirectional type Low clamping voltage versus
More informationt p = 10 ms T j initial = T amb
P6KE TRANSIL FEATURES Peak pulse power: 600 W (/0 µs ) Stand-off voltage range 6.8 to 440V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil
More informationSMA4F. High junction temperature Transil. Features. Description. Complies with the following standards
High junction temperature Transil Features ECOPACK2 halogen-free component Peak pulse power: 400 W (10/1000 µs) 3 kw (8/20 µs) Stand off voltage: 5 V Unidirectional type Low clamping voltage versus standard
More information20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
More informationP6SMB Transient Voltage Suppressor Diode Series
P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationBDW93C, BDW94C Series
Features Designed for general-purpose amplifier and low speed switching applications Collector-emitter sustaining voltage- CEO (sus) = (Minimum) Collector-emitter saturation voltage- CE (sat) = 2 (Maximum)
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationSMTYF. Low forward voltage TVS Transky. Features. Description. Complies with the following standards:
Low forward voltage TVS Transky Features High peak pulse power: 600 W (10/1000 µs) 4000 W (8/20 µs) Stand-off voltage 5 or 12 V Low forward voltage: 0.48 V @ 0.85 A @ 25 C K A Low clamping factor V CL
More informationDarlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications Collector-emitter sustaining voltage - V CEO (sus) = 60 V (minimum) - TIP120, TIP125 80 V (minimum) - TIP121, TIP126
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSymbol Description Value Unit Conditions. Minimum 600
600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:
More informationObsolete Product(s) - Obsolete Product(s)
Low forward voltage TVS: Transky Main applications Power rail ESD transient over-voltages and reverse voltages protection for 5 and 12 V supplied IC s Description The Transky is designed specifically for
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSTIEC45-XXAS. Transil for IEC compliance. Features. Description. Complies with the following standards
Transil for IEC 61000-4-5 compliance Features Peak pulse current: 500 A (8/20 μs, 1.2/50 µs) Stand off voltage range: from 24 to 33 Unidirectional types Low leakage current 0.2 µa at 25 C 1 µa at 85 C
More informationSMM4F12AVCL. 400 W low clamping voltage Transil. Features. Description. Complies with the following standards
400 W low clamping voltage Transil Features Typical peak pulse power: 400 W (10/1000 µs) 2.4 kw (8/20 µs) Stand off voltage: 12 V Unidirectional type Low clamping factor Low leakage current: 0.2 µa at
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationBAT48 Series. Small signal Schottky diodes. Main product characteristics. Features and benefits. Order codes. Description. BAT48ZFILM (Single) SOD-123
Small signal Schottky diodes Main product characteristics I F V RRM C (typ) T j (max) 350 ma 40 V 18 pf 150 C SOD-123 BAT48ZFILM (Single) Features and benefits Low leakage current losses Negligible switching
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR
More informationTPP OVERVOLTAGE and OVERCURRENT PROTECTION for TELECOM LINE. Application Specific Discretes A.S.D.
Application Specific Discretes A.S.D. OVERVOLTAGE and OVERCURRENT PROTECTION for TELECOM LINE FEATURES UNIDIRECTIONAL FUNCTION PROGRAMMABLE BREAKDOWN VOLTAGE UP TO 250 V PROGRAMMABLE CURRENT LIMITATION
More informationGND IEC level 4 15 kv (air discharge) 8 kv (contact discharge) I/O5 MIL STD 883G- Method : class 3B 25 kv (human body model)
Transil array for data line protection Features High surge capability Transil array: I PP = 40 A (8/20 µs) Peak pulse power : 300 W (8/20 µs) Up to 6 bidirectional Transil functions Low clamping factor
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationESDAxxxP6 ASD. Transil array for ESD protection. Main applications. Order codes. Features. Description. Benefits
ASD Transil array for ESD protection Main applications Where transient overvoltage protection in ESD sensitive equipment is required, such as: Computers Servers Printers Communication systems and cellular
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J
More informationDarlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications Collector-Emitter sustaining voltage V CEO (sus) = 60 V (Minimum) - TIP45 = 80 V (Minimum) - TIP4, TIP46 = 00 V (Minimum)
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationUnidirectional*
Unidirectional* Mosorb devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener
More information1.5KE. Transil. Features. Description
Transil Datasheet production data Features Peak pulse power: 1500 W (/0 µs) Breakdown voltage range: From 6.8 V to 440 V Uni and bidirectional types Low clamping factor Fast response time UL 497B file
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationESDA6V1U1 TRANSIL ARRAY FOR ESD PROTECTION. Application Specific Discretes A.S.D.
Application Specific Discretes A.S.D. ESDA6V1U1 TRANSIL ARRAY FOR ESD PROTECTION APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : COMPUTERS PRINTERS
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationDarlington Transistor TO-3
Description Designed for use as output devices in complementary general purpose amplifier applications. Features: High gain darlington performance High DC current gain hfe = 1,000 (Minimum) at Ic = 20A
More information1.5KE6.8(C)A - 1.5KE440(C)A
1.5KE6.8(C)A - 1.5KE440(C)A Features Glass passivated junction. 1500W Peak Pulse Power capability at 1.0 ms. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationMetal Oxide Varistors
Straight Lead Dimensions Table Series 5D 7D 10D 14D 20D D max 7 9.5 14 17.5 24 d* 0.6 0.6 0.8 0.8 1 W** 5 5 7.5 7.5 10 H max 12.5 14.5 20 22.5 29.5 H1 max 10 12 17 20.5 28 T max 4.9 4.9 8.5 8.5 9 P max
More information