S3 Series. Standard Recovery Power Diodes. Features: Mechanical Data: SMC/DO-214AB. Foot Print. Dimensions. Page 1 27/03/06 V1.0
|
|
|
- Everett Wilcox
- 5 years ago
- Views:
Transcription
1 Features: For surface mounted application. Glass passivated junction chip. Low forward voltage drop. Easy pick and place. High surge current capability. High temperature soldering: 250 C/10 seconds at terminals. Mechanical Data: Cases : Moulded plastic. Terminals : Solder plated. Polarity : Indicated by cathode band. SMC/DO-214AB Foot Print Dimensions : Inches (Millimetres) Dimensions Length Depth Width X Y Z Dimensions : Millimetres Page 1 27/03/06 V1.0
2 Maximum Ratings and Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Type Number S3A S3D S3G S3J Unit Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at T L = 75 C 3.0 Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) 100 V A Maximum Instantaneous forward voltage at 3.0A 1.15 V Maximum DC reverse current at T A = 25 C at rated DC blocking voltage at T A = 125 C Maximum reverse recovery time (Note 1) 2.5 µs Typical junction capacitance (Note 2) 60 pf Operating temperature range T J -55 to +150 C Storage temperature range T STG Notes: 1. Reverse recovery test conditions: I F = 0.5A, I R = 1.0A, I RR = 0.25A. 2. Measured at 1MHz and applied V R = 4.0 Volts µa Ratings and Characteristic Curves Figure 1 Maximum Forward Current Derating Curve Figure 2 Maximum Non-Repetitive Forward Surge Current Page 2 27/03/06 V1.0
3 Figure 3 Typical Forward Characteristics Figure 4 Typical Reverse Characteristics Figure 5 Typical Junction Capacitance Page 3 27/03/06 V1.0
4 Specifications V RRM maximum (V) 50 I AV (A) I FSM (A) V F (V) at I F = 1A at 25 C Package Part Number S3A 200 DO-214AB S3D (SMC) S3G 600 S3J Page 4 27/03/06 V1.0
5 Notes: International Sales Offices: AUSTRALIA Farnell InOne Tel No: Fax No: FINLAND Farnell InOne Tel No: Fax No: NETHERLANDS Farnell InOne Tel No: Fax No: SWITZERLAND Farnell InOne Tel No: Fax No: AUSTRIA Farnell InOne FRANCE Farnell InOne NEW ZEALAND Farnell InOne UK Farnell InOne Tel No: Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: Fax No: BELGIUM Farnell InOne GERMANY Farnell InOne NORWAY Farnell InOne UK BuckHickman InOne Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: BRAZIL Tel No: Fax No: HONG KONG Tel No: Fax No: PORTUGAL Farnell InOne Tel No: Fax No: UK CPC CHINA Tel No: Fax No: IRELAND Farnell InOne Tel No: Fax No: SINGAPORE Tel No: Fax No: export EXPORT Farnell InOne Tel No: Fax No: For enquiries from all other markets DENMARK Farnell InOne ITALY Farnell InOne SPAIN Farnell InOne Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: ESTONIA Farnell InOne Tel No: Fax No: MALAYSIA Tel No: Fax No: SWEDEN Farnell InOne Tel No: Fax No: Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. Premier Farnell plc Page 5 27/03/06 V1.0
P600 Series 6A Power Diodes
Standard Axial Rectifiers Features: High surge current capability. Void-free plastic in a P600 package. High current operation 6.0 Amperes at T A = 55 C. Exceeds environmental standards of MIL-S-19500/228.
MBR10xCT Series TO-220AB
10x Series Features: Plastic material. Metal silicon junction, majority carrier conduction. Low power loss, high efficiency. High current capability, low forward voltage drop. High surge capability. For
Encapsulated Transformers 115V + 115V Primary, Low Profile
Features: Robust construction. Wide range of secondary voltages available. Single voltage and Dual voltage secondary combination. 2.0VA up to 52VA. CE marked. Designed and manufactured according to international
BZW04 Series. Features: DO-41. Mechanical Data. Page <1> 14/05/08 V1.1
DO-41 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 400W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low impedancesurge resistance.
BZW06- Series DO-15. Mechanical Data. Page <1> 14/05/08 V1.1
DO-15 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 600W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low zener impedance.
HRS2 Series PCB Relays
Features: Low profile. Fully sealed. Standard and sensitive coil versions. DPCO contacts. Specifications: Coil Data: Nominal Voltage : 3V dc to 24V dc. Nominal Power Consumption : 150 to 360mW. Contact
MJ15022 / MJ15024 Power Transistors
The and MJ15024 are silicon power base power transistors designed for high power audio, disk head positioners and other linear applications. Features: High Safe Operating Area. High DC Current Gain h FE
BU426A Power Transistor
High Voltage Switching BU426A type is a fast switching high voltage transistor, more specially intended for operating in colour TV supply systems. Features: Collector-Emitter sustaining voltage - V CEO(sus)
2N6668 Darlington Power Transistor
Plastic Medium-Power Silicon Transistors are designed for general-purpose amplifier and low speed switching applications. Features: Collector-Emitter Sustaining Voltage V CEO(sus) = 80V (Minimum). Collector-Emitter
DE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:
EN - For pricing and availability in your local country please visit one of the below links: DE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:
LPR Series PCB Snap-In Large Capacitors
Features: LPR series large size capacitors with the specially designed self-standing" terminals can be directly soldered to printed circuit boards without holders. Easy fixing to PCBs without need for
MJ15003, MJ A Complementary Power Transistors
The MJ15003 and MJ15004 are power base power transistors designed for high power audio, disk head positioners, linear amplifiers, switching regulators and other linear applications. Features: High Power
TIP120, 121, 122, 125, 126, 127 Darlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications. Collector-Emitter sustaining voltage-v CEO(sus) = 60V (Minimum) - TIP120, TIP125 80V (Minimum) - TIP121, TIP126 100V
MJE13005 Power Transistor
Switchmode Series NPN s are designed for use in high-voltage, high-speed, power switching in inductive circuits, they are particularly suited for 115 and 220V switchmode applications such as switching
BUV48A Power Transistor
High Voltage Switching Switchmode Series NPN s are designed for use in high-voltage, highspeed, power switching regulators, converters, inverters, motor control system application. Features: Collector-Emitter
2N6054/2N6056 Darlington Transistors
Features: General-purpose power amplifier and low frequency switching applications. Low Collector-Emitter Saturation Voltage - V CE(SAT) = 2.0V (Maximum) at I C = 4.0A = 3.0V (Maximum) at I C = 8.0A Monolithic
MJ11032, Darlington Power Transistors
Complementary Silicon Power Darlington Transistors are designed for use as output devices in complementary general purpose amplifier applications. Features: High Gain Darlington performance. High : h FE
2N4401 & 2N4403 General Purpose Switching Transistors
Features: NPN/PNP Silicon Planar Epitaxial Transistors. General purpose Switching Applications. 2N 4401 Type NPN. 2N 4403 Type PNP. 2N4401 NPN TO92 2N4403 PNP Dimensions Minimum Maximum A 4.32 5.33 B 4.45
TM-533-T/R TACT Switches
Features: Sharp click feel with a positive tactile feed-back. Due to small movement distance (stroke), user experiences distinct sensation when the switch clicks into place. Ultraminiature and light weight
2N2222A High Speed Switching Transistor
High Speed Switching Transistor Features: NPN Silicon Planar Switching Transistor. Fast switching devices exhibiting short turnoff and low saturation voltage characteristics. Switching and Linear application
DIL Switches Low Profile
NDI Features: Single pole single throw DIL switches. Splay terminals allow for automatic insertion by IC insertion machine. Insert moulding of terminals and ultrasonic welding improve flux proofness and
Ultraminiature Rocker&Lever Switches V ac or dc
Specifications: Contact Rating Mechanical Life Contact Resistance Minimum Insulation Resistance Dielectric Strength Operating Temperature Materials: Case and Bushing Switch Support Contacts/Terminals :
SMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.
Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent
No-Clean Flux Lead Free Tin/Silver/Copper Alloy
Features: Halide free version-typ 400. Mild odour. Fast soldering-range of activities to suit all applications. Clear residues. Good spread on copper, brass and nickel. Heat stable-low spitting. Multicomp
SMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band.
SMA/DO-214AC Features: For surface mounted application. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time : typically less than 1.0ps
Equipment Wire. Specification: Primary Insulation Material : PVC. Specification Table. Page 1 16/04/08 V1.1. Reel Conductor Conductor Length (m)
Specification: Material : PVC. Brown BLACK M BROWN M RED M ORANGE M 0.078 0 1.05 0.3 0.5 10/0.1 YELLOW M GRN M BLUE M GREY M WHT M PINK M 0.22 1.2 1.4 7/0.2 BK Page 1 16/04/08 V1.1 Brown BN RD OE YW GN
TIP120, 121, 122, 125, 126, 127
Features: Collector - emitter sustaining voltage - V CEO (sus) = 60 V (minimum) - TIP120, TIP125 80 V (minimum) - TIP121, TIP126 100 V (minimum) - TIP122, TIP127 Collector - emitter saturation voltage
5A, 50V V Surface Mount Rectifier
5A, 50V - 000V Surface Mount Rectifier FEATURES Glass passivated chip junction Ideal for automated placement Low forward voltage drop High current capability High surge current capability Compliant to
Darlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications Collector-emitter sustaining voltage - V CEO (sus) = 60 V (minimum) - TIP120, TIP125 80 V (minimum) - TIP121, TIP126
S07B, S07D, S07G, S07J, S07M
Small Signal Switching Diode, High Voltage S07B, S07D, S07G, S07J, S07M Features For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering:
UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier
UF400, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier FEATURES Glass passivated chip junction Ultrafast reverse recovery time Low forward voltage drop Low switching losses,
SMD Power Inductors. Features: Applications: Figure 1. Figure 2. Page <1> 20/06/11 V1.1
Features: Ferrite based SMD inductor with lower core loss. Ideal for LCD driver, DSC/DVC, Notebook PC or High density board design. Operating temperature range -55 C to + 130 C. MCSDRH73B - Series High
Dual Common Cathode Ultrafast Plastic Rectifier
Dual Common Cathode Ultrafast Plastic Rectifier TO-2AB UGE8xCT PIN PIN 2 3 2 FEATURES Power pack Glass passivated pellet chip junction Ultrafast recovery time Low switching losses, high efficiency Low
Glass Passivated Junction Plastic Rectifier
N400GP, N4002GP, N4003GP, N4004GP, N4005GP, N4006GP, N4007GP Glass Passivated Junction Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability application
Darlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications Collector-Emitter sustaining voltage V CEO (sus) = 60 V (Minimum) - TIP45 = 80 V (Minimum) - TIP4, TIP46 = 00 V (Minimum)
S07B / 07D / 07G / 07J / 07M
Small Signal Fast Switching Diode, High Voltage Features For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: 260 C/ 10 seconds
Obsolete Product(s) - Obsolete Product(s)
BYT 30P-1000 FAST RECOVERY RECTIFIER DIODE VERY HIGH REVERSE VOLTAGE CAPABILITY VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING SUITABLE APPLICATIONS FREE WHEELING
S07B, S07D, S07G, S07J, S07M
Small Signal Switching Diode, High Voltage S07B, S07D, S07G, S07J, S07M Features For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering:
Dual Common Cathode Ultrafast Rectifier
UGEBCT, UGECCT, UGEDCT Dual Common Cathode Ultrafast Rectifier PIN PIN 3 UGExCT PIN 2 CASE PRIMARY CHARACTERISTICS 2 3 I F(AV) 2 x 5.0 A V RRM 0 V, 50 V, 200 V I FSM 55 A t rr 25 ns V F 0.895 V T J max.
2A, 800V V Glass Passivated High Efficient Rectifier
2A, 800V - 1000V Glass Passivated High Efficient Rectifier FEATURES Glass passivated chip junction High efficiency, Low V F High current capability High surge current capability Low power loss Compliant
High Voltage Glass Passivated Junction Plastic Rectifier
High Voltage Glass Passivated Junction Plastic Rectifier SUPERECTIFIER FEATURES Superectifier structure for high reliability application Cavity-free glass-passivated junction Low leakage current High forward
High Current Density Surface Mount Glass Passivated Rectifiers
SPB, SPD, SPG, SPJ, SPK, SPM High Current Density Surface Mount Glass Passivated Rectifiers esmp Series DO-22AA (SMP) FEATURES Very low profile - typical height of. mm Available Ideal for automated placement
Surface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier DO-24AB (SMC) PRIMARY CHARACTERISTICS I F(AV) 3. A V RRM 3 V, 4 V I FSM A t rr 35 ns V F at I F. V T J max. 5 C Package DO-24AB (SMC) Diode variations Single die
Large Snap-In Electrolytic Capacitors HPR Series
Features: Highly reliable capacitors that has characteristics of high temperature 105ºC, and can withstand high ripple current Suitable for filter of industrial equipment, such as automatic machines, computers
High Current Density Surface Mount Glass Passivated Rectifiers
SPB, SPD, SPG, SPJ, SPK, SPM High Current Density Surface Mount Glass Passivated Rectifiers esmp Series DO-22AA (SMP) FEATURES Very low profile - typical height of. mm Available Ideal for automated placement
BDW93C, BDW94C Series
Features Designed for general-purpose amplifier and low speed switching applications Collector-emitter sustaining voltage- CEO (sus) = (Minimum) Collector-emitter saturation voltage- CE (sat) = 2 (Maximum)
Fast Switching Plastic Rectifier
BY9(X,B)-00 thru BY9(X,B)-800 Fast Switching Plastic Rectifier TO-0AC BY9 Series PIN PIN CASE TO-63AB ITO-0AC BY9x Series PIN PIN FEATURES Glass passivated chip junction Superfast recovery time for high
Dual Common-Cathode Ultrafast Rectifier
Dual Common-Cathode Ultrafast Rectifier TO-22AB BYV32 Series PIN PIN 3 CASE 2 3 TO-263AB ITO-22AB 2 3 BYVF32 Series PIN PIN 3 2 FEATURES Power pack Glass passivated pellet chip junction Ultrafast recovery
Surface-Mount Glass Passivated Rectifier
Surface-Mount Glass Passivated Rectifier DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS Anode click logo to get started I F(AV).0 A V RRM 400 V,
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes SYMBOL I O I FSM. R θ JC.
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes RS21 THRU RS27 FEATURES * Ideal for printed circuit board * Surge overload rating: 5 amperes peak * Weight:
Terminal Blocks. TBF Turrett Terminal Series. Specifications: Material: Page <1> 17/01/12 V1.1
s TBF Turrett Terminal Series Insulator : PBT, rated UL94V-0 : 300 V ac : 15 A : 500 MΩ : 22-14 AWG : -65 C to +125 C Dimensions : (Millimetres) Unless Otherwise Specified All Dimensions are (mm) A = 0.374
Surface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier SMC (DO-24AB) PRIMARY CHARACTERISTICS I F(AV) 3. A V RRM 4 V, 6 V I FSM 25 A t rr 5 ns V F.5 V T J max. 75 C Package SMC (DO-24AB) Diode variation Single FEATURES
Glass Passivated Ultrafast Plastic Rectifier
Glass Passivated Ultrafast Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability condition Cavity-free glass-passivated junction Ideal for printed circuit
Fast Switching Plastic Rectifier
Fast Switching Plastic Rectifier TO-0AC ITO-0AC FEATURES Glass passivated chip junction Superfast recovery time for high efficiency Low leakage current High forward surge capability BY9 Series CASE TO-63AB
8A, 400V V Surface Mount Glass Passivated Rectifier
8A, 400V - 00V Surface Mount Glass Passivated Rectifier FEATURES Low forward voltage drop Ideal for automated placement High surge current capability Compliant to RoHS Directive 2011/65/EU and in accordance
SMD Photovoltaic Solar Cell Protection Rectifier
SMD Photovoltaic Solar Cell Protection Rectifier esmp Series 2 Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Ideal for automated placement Glass passivated pellet chip junction
BZW06-5V8/376 BZW06-5V8B/376B
BZW06-5V8/376 BZW06-5V8B/376B TRANSIL TM FEATURES PEAK PULSE POWER : 600 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 5.8V to 376 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL
High Current Density Surface Mount Ultrafast Rectifiers
High Current Density Surface Mount Ultrafast Rectifiers esmp Series PRIMARY CHARACTERISTICS I F(AV).0 A V RRM 0 V, 50 V, 200 V t rr 25 ns V F 0.90 V T J max. 75 C Package Diode variations Single die FEATURES
Obsolete Product(s) - Obsolete Product(s)
6 V power Schottky silicon carbide diode Features No or negligible reverse recovery Switching behavior independent of temperature Particularly suitable in PFC boost diode function Description The SiC diode
2A, 50V - 600V Glass Passivated Super Fast Rectifier
SF21 - SF28 2A, 50V - 600V Glass Passivated Super Fast Rectifier FEATURES Glass passivated chip junction High efficiency, Low V F High current capability High surge current capability Low power loss Compliant
Distributed by: www.jameco.com -8-83-4242 The content and copyrights of the attached material are the property of its owner. Miniature Glass Passivated Ultrafast Bridge Rectifier Case Style DFM PRIMARY
Dual Common Cathode Ultrafast Plastic Rectifier
6xT, F6xT, B6xT Dual Common Cathode Ultrafast Plastic Rectifier TO-220AB ITO-220AB FEATURES Power pack Glass passivated pellet chip junction Ultrafast recovery time Low switching losses, high efficiency
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J
Surface Mount Resistor Kit 0603 Case Size
Specifications Table Type Power Rating Resistance Tolerance Nominal Resistance MC 0603 0.0625W (1/16W) ±1% 10Ω Ratings: Type MC 0603 Power Rating 0.0625W (1/16W) Max. Working Voltage 50V Max. Overload
Symbol Parameter Value Unit. Maximum lead temperature for soldering during 10s at 5mm from case
BZW50-10,B/180,B TRANSIL TM FEATURES PEAK PULSE POWER : 5000 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 10V to 180V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL RECOGNIZED DESCRIPTION
Darlington Transistor TO-3
Description Designed for use as output devices in complementary general purpose amplifier applications. Features: High gain darlington performance High DC current gain hfe = 1,000 (Minimum) at Ic = 20A
Absolute Maximum Ratings T amb = 25 C, unless otherwise specified Parameter Test condition Part Symbol Value Unit
Ultra Fast Sinterglass Diode Features High temperature metallurgically bonded construction Cavity-free glass passivated junction Superfast recovery time for high efficiency Low forward voltage, high current
Surface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier PRIMARY CHARACTERISTICS I F(AV) 3. A V RRM 5 V, V, 15 V, 2 V I FSM A t rr 2 ns V F.9 V T J max. 15 C Package Diode variations Single FEATURES Glass passivated
Surface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.0 A V RRM 200 V I FSM 40 A t rr 25 ns V F 0.71 V T J max. 175 C Package Diode variations Single die FEATURES Glass passivated
Surface Mount Glass Passivated Rectifier
Surface Mount Glass Passivated Rectifier DO-24AC (SMA) PRIMARY CHARACTERISTICS I F(AV) 2.0 A V RRM 200 V, 400 V, 600 V, 800 V, 00 V I FSM 50 A I R 5.0 μa V F at I F = 2.0 A (T A = 25 C) 0.90 V T J max.
SURFACE MOUNT SUPER FAST RECTIFIER. VOLTAGE RANGE 50 to 400 Volts CURRENT 0.5 Ampere. 300 Maximum RMS Voltage. 210 Maximum DC Blocking Voltage
SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 400 Volts CURRENT 0.5 Ampere 05E1L THRU 05E6L FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast
SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER SYMBOL
SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 5 to 6 CURRENT 1. Ampere FEATURES * Glass passivated device * Ideal for surface mounted applications * Low leakage current * Metallurgically
3A, 50V - 600V Surface Mount Ultrafast Power Rectifier
305S - 360S 3A, 50V - 600V Surface Mount Ultrafast Power Rectifier FEATURES Glass passivated junction Ideal for automated placement Built-in strain relief Ultrafast recovery time for high efficiency Compliant
Ultrafast Plastic Rectifier
Ultrafast Plastic Rectifier 6xT, F6xT, B6xT TO-0AC 6xT Series PIN CASE ITO-0AC F6xT Series PIN D PA (TO-63AB) B6xT Series PIN HEATSIN FEATURES Power pack Glass passivated pellet chip junction Ultrafast
Ultrafast Plastic Rectifier
8xT, F8xT, B8xT Ultrafast Plastic Rectifier TO-0AC ITO-0AC FEATURES Power pack Glass passivated pellet chip junction Ultrafast recovery time Low switching losses, high efficiency 8xT PIN F8xT PIN Low leakage
High Power 6W LED. Package Dimensions: Features: Applications: Absolute Maximum Ratings at Ta=25 C.
Package Dimensions: Features: Excellent transiting heat from LED chip operating under 350mA High luminous output No UV Applications: Reading lights Portable flashlight Uplighters & downlighters Garden
STPS3L40. Power Schottky rectifier. Main product characteristics A. Features and Benefits. Description. Order codes SMC STPS3L40S
Power Schottky rectifier Main product characteristics A I F(AV) V RRM T j (max) V F (max) 3 A 4 V 15 C.44 V K SMC S Features and Benefits Negligible switching losses Low thermal resistance Low forward
Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.
Specifications Mechanical Mechanical Life Operating Force Environmental Operating Temperature Storage Temperature : 200mΩ max. 20,000 steps : 200gf-cm max. : -25 C to +80 C : -40 C to +85 C Material Base
SURFACE MOUNT SUPER FAST RECTIFIER SYMBOL SE1 SE2 V RRM V RMS V DC I O C J T J T STG
SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 5 to 4 CURRENT. Ampere SE THRU SE6 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching speed
Thick Film Chip Resistor
Features: Small size and light weight. Highly reliable multilayer electrode construction. Compatible with all soldering process. Construction 1 Alumina Substrate 2 Bottom Electrode (Ag-Pd) 3 Top Electrode
VOLTAGE RANGE 50 to 600 Volts CURRENT 3.0 Amperes. UNITS Maximum Recurrent Peak Reverse Voltage SYMBOL V RRM V RMS V DC I O I FSM.
GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE to 6 CURRENT 3. Amperes SF3 THRU SF37 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching
Ultrafast Rectifier FEATURES
Ultrafast Rectifier TO-AC ITO-AC BYW9 Series BYWF9 Series PIN PIN CASE D PA (TO-63AB) BYWB9 Series PIN HEATSIN DESIGN SUPPORT TOOLS click logo to get started FEATURES Power pack Glass passivated pellet
High Power 6W LED. Package Dimensions: Features: Applications: Absolute Maximum Ratings at Ta=25 C.
Package Dimensions: Features: Excellent transiting heat from LED chip operating under 350mA High luminous output No UV Applications: Reading lights Portable flashlight Uplighters & downlighters Garden
BAT48 Series. Small signal Schottky diodes. Main product characteristics. Features and benefits. Order codes. Description. BAT48ZFILM (Single) SOD-123
Small signal Schottky diodes Main product characteristics I F V RRM C (typ) T j (max) 350 ma 40 V 18 pf 150 C SOD-123 BAT48ZFILM (Single) Features and benefits Low leakage current losses Negligible switching
2A, 100V - 200V Surface Mount Ultra Fast Rectifier
2A, 0V - 200V Surface Mount Ultra Fast Rectifier FEATURES Glass passivated junction chip Ideal for automated placement Low profile package Ultra fast recovery time for high efficiency Compliant to RoHS
HDB208LS. SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE 1000 Volts CURRENT 2.0 Ampere DB-LS FEATURES MECHANICAL DATA
HDB28LS SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE 1 CURRENT 2. Ampere FEATURES * Glass passivated device * Good for automation insertion * Low leakage current * Ideal for
Dual Common-Cathode Ultrafast Recovery Rectifier
New Product UH0FCT& UHB0FCT Dual Common-Cathode Ultrafast Recovery Rectifier FEATURES Oxide planar chip junction TO-0AB TO-63AB Ultrafast recovery times Soft recovery characteristics Low switching losses,
High Voltage Ultrafast Avalanche SMD Rectifiers
High Voltage Ultrafast Avalanche SMD Rectifiers PRIMARY CHARACTERISTICS I F(AV) DO-24AC (SMA).0 A FEATURES Glass passivated pellet chip junction Low profile package Ideal for automated placement Low reverse
Ultrafast Rectifier V AC 1500 V
Ultrafast Rectifier FEATURES TO-0AC ITO-0AC Power pack Glass passivated pellet chip junction Ultrafast recovery time Low switching losses, high efficiency High forward surge capability UG8xT PIN CASE TO-63AB
Surface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV). A V RRM 5 V, V, 5 V, 2 V I FSM 3 A t rr 5 ns V F at I F.92 V T J max. 5 C Package SMA (DO-24AC) Diode variations
Chip Resistors Pulse Withstanding
Features: Tolerance from ±0.5% to 5% High power rating Excellent pulse withstanding performance Improved working voltage ratings Standard package sizes of 0603 to 2512 Applications: Metering (Testing/Measurement)
4 1N5400G-K - 1N5408G-K Taiwan Semiconductor. 3A, 50V V Glass Passivated Rectifier
4 1N5400-1N5408 3A, 50V - 0V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low V F High reliability High surge current capability Low power loss, high efficiency
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes V RRM V RMS V DC I O I FSM
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 4. Amperes RS41L THRU RS47L FEATURES * Ideal for printed circuit board * Surge overload rating: 15 amperes peak * Mounting
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to
Fast Rectifier Surface-Mount
Fast Rectifier Surface-Mount esmp Series SMF (DO-29AB) 2309 2 23020 FEATURES For surface mounted applications Low profile package Ideal for automated placement Glass passivated Meets MSL level, per J-STD-020,
Dual Common Cathode Ultrafast Soft Recovery Rectifier
BYT28-x00, BYT28F-x00, BYT28B-x00, UGxCT, UGFxCT, UGBxCT Dual Common Cathode Ultrafast Soft Recovery Rectifier TO-220AB 2 3 BYT28, UG Series PIN PIN 3 CASE BYT28B, UGB Series PIN DESIGN SUPPORT TOOLS Models
2A, 1000V Glass Passivated Bridge Rectifier
2A, 000V Glass Passivated Bridge Rectifier FEATURES Glass passivated junction Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge current capability
Surface Mount Ultra Fast Rectifier
USA, USB, USD, USG, USJ, USK, USM Surface Mount Ultra Fast Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV).0 A 50 V, 0 V, 200 V, 400 V, 600 V, V RRM 800 V, 00 V I FSM 30 A t rr 50 ns, 75 ns V F
Schottky Rectifier Surface-Mount
Schottky Rectifier Surface-Mount esmp Series SMF (DO-29AB) DESIGN SUPPORT TOOLS Models Available MECHANICAL DATA 2309 Case: SMF (DO-29AB) Polarity: color band denotes cathode end Weight: approx. 5 mg Packaging
4 1N4001G-K - 1N4007G-K Taiwan Semiconductor. 1A, 50V V Glass Passivated Rectifier
4 N400 - N4007 A, 50V - 00V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low VF High reliability High surge current capability Low power loss, high efficiency