HRS2 Series PCB Relays
|
|
|
- John George
- 6 years ago
- Views:
Transcription
1 Features: Low profile. Fully sealed. Standard and sensitive coil versions. DPCO contacts. Specifications: Coil Data: Nominal Voltage : 3V dc to 24V dc. Nominal Power Consumption : 150 to 360mW. Contact Data: Contact Arrangement : 2 Form C. Contact Material : AuAg. Contact Rating : 1A at 24V dc/120v ac. Maximum Switching Voltage : 60V dc/120v ac. Maximum Switching Current : 2A. Maximum Switching Power : 60VA, 24W. Contact Resistance (Initial) : 100mΩ at 6Vdc 1A. Life Expectancy Electrical : 100,000 operations at nominal load. Mechanical : 10,000,000 operations. General Data: Minimum Insulation Resistance : 100MΩ, at 500V dc. Dielectric Strength : 1000V ac, 1 minute between open contact 1500V ac, 1 minute between contact and coil. Surge Strength : 2000V ac (20Ω). Maximum Operate Time : 6ms. Maximum Release Time : 4ms. Temperature Range : -30 C to +60 C. Shock Resistance : 15G. Vibration Resistance : 10-55Hz, Amplitude 1.5mm. Page 1 08/05/06 V1.0
2 Dimensions : Millimetres HRS2H Characteristics Data Timing Coil Temperature Rise Page 2 08/05/06 V1.0
3 Operating Range Maximum Switching Power Life Curve Page 3 08/05/06 V1.0
4 Specification Table Type Coil Nominal Coil Resistance (Ω) ±10% Operating Voltage Release Voltage Coil Nominal (mw) Part Number High Sensitivity Standard HRS2H-S DC5V HRS2H-S DC9V HRS2H-S DC12V HRS2H-S DC24V HRS2B-S DC5V HRS2B-S DC12V HRS2B-S DC24V Part Number Explanation HRS2 H - S DC5V Type Sensitive Type Enclosure Nominal Voltage Enclosure : S = Washable. Sensitive Type : H - High Sensitive Type, B - Standard Type. Nominal Voltage : DC5V = 5V, DC9V = 9V, DC12V = 12V, DC24V = 24V. Page 4 08/05/06 V1.0
5 Notes: International Sales Offices: AUSTRALIA Farnell InOne Tel No: Fax No: FINLAND Farnell InOne Tel No: Fax No: NETHERLANDS Farnell InOne Tel No: Fax No: SWITZERLAND Farnell InOne Tel No: Fax No: AUSTRIA Farnell InOne FRANCE Farnell InOne NEW ZEALAND Farnell InOne UK Farnell InOne Tel No: Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: Fax No: BELGIUM Farnell InOne GERMANY Farnell InOne NORWAY Farnell InOne UK BuckHickman InOne Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: BRAZIL Tel No: Fax No: HONG KONG Tel No: Fax No: PORTUGAL Farnell InOne Tel No: Fax No: UK CPC CHINA Tel No: Fax No: IRELAND Farnell InOne Tel No: Fax No: SINGAPORE Tel No: Fax No: export EXPORT Farnell InOne Tel No: Fax No: For enquiries from all other markets DENMARK Farnell InOne ITALY Farnell InOne SPAIN Farnell InOne Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: ESTONIA Farnell InOne Tel No: Fax No: MALAYSIA Tel No: Fax No: SWEDEN Farnell InOne Tel No: Fax No: Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. Premier Farnell plc Page 5 08/05/06 V1.0
Encapsulated Transformers 115V + 115V Primary, Low Profile
Features: Robust construction. Wide range of secondary voltages available. Single voltage and Dual voltage secondary combination. 2.0VA up to 52VA. CE marked. Designed and manufactured according to international
LPR Series PCB Snap-In Large Capacitors
Features: LPR series large size capacitors with the specially designed self-standing" terminals can be directly soldered to printed circuit boards without holders. Easy fixing to PCBs without need for
TM-533-T/R TACT Switches
Features: Sharp click feel with a positive tactile feed-back. Due to small movement distance (stroke), user experiences distinct sensation when the switch clicks into place. Ultraminiature and light weight
S3 Series. Standard Recovery Power Diodes. Features: Mechanical Data: SMC/DO-214AB. Foot Print. Dimensions. Page 1 27/03/06 V1.0
Features: For surface mounted application. Glass passivated junction chip. Low forward voltage drop. Easy pick and place. High surge current capability. High temperature soldering: 250 C/10 seconds at
DIL Switches Low Profile
NDI Features: Single pole single throw DIL switches. Splay terminals allow for automatic insertion by IC insertion machine. Insert moulding of terminals and ultrasonic welding improve flux proofness and
BUV48A Power Transistor
High Voltage Switching Switchmode Series NPN s are designed for use in high-voltage, highspeed, power switching regulators, converters, inverters, motor control system application. Features: Collector-Emitter
BU426A Power Transistor
High Voltage Switching BU426A type is a fast switching high voltage transistor, more specially intended for operating in colour TV supply systems. Features: Collector-Emitter sustaining voltage - V CEO(sus)
P600 Series 6A Power Diodes
Standard Axial Rectifiers Features: High surge current capability. Void-free plastic in a P600 package. High current operation 6.0 Amperes at T A = 55 C. Exceeds environmental standards of MIL-S-19500/228.
TIP120, 121, 122, 125, 126, 127 Darlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications. Collector-Emitter sustaining voltage-v CEO(sus) = 60V (Minimum) - TIP120, TIP125 80V (Minimum) - TIP121, TIP126 100V
2N6668 Darlington Power Transistor
Plastic Medium-Power Silicon Transistors are designed for general-purpose amplifier and low speed switching applications. Features: Collector-Emitter Sustaining Voltage V CEO(sus) = 80V (Minimum). Collector-Emitter
MJ11032, Darlington Power Transistors
Complementary Silicon Power Darlington Transistors are designed for use as output devices in complementary general purpose amplifier applications. Features: High Gain Darlington performance. High : h FE
MJ15022 / MJ15024 Power Transistors
The and MJ15024 are silicon power base power transistors designed for high power audio, disk head positioners and other linear applications. Features: High Safe Operating Area. High DC Current Gain h FE
2N6054/2N6056 Darlington Transistors
Features: General-purpose power amplifier and low frequency switching applications. Low Collector-Emitter Saturation Voltage - V CE(SAT) = 2.0V (Maximum) at I C = 4.0A = 3.0V (Maximum) at I C = 8.0A Monolithic
MJE13005 Power Transistor
Switchmode Series NPN s are designed for use in high-voltage, high-speed, power switching in inductive circuits, they are particularly suited for 115 and 220V switchmode applications such as switching
MJ15003, MJ A Complementary Power Transistors
The MJ15003 and MJ15004 are power base power transistors designed for high power audio, disk head positioners, linear amplifiers, switching regulators and other linear applications. Features: High Power
2N4401 & 2N4403 General Purpose Switching Transistors
Features: NPN/PNP Silicon Planar Epitaxial Transistors. General purpose Switching Applications. 2N 4401 Type NPN. 2N 4403 Type PNP. 2N4401 NPN TO92 2N4403 PNP Dimensions Minimum Maximum A 4.32 5.33 B 4.45
Ultraminiature Rocker&Lever Switches V ac or dc
Specifications: Contact Rating Mechanical Life Contact Resistance Minimum Insulation Resistance Dielectric Strength Operating Temperature Materials: Case and Bushing Switch Support Contacts/Terminals :
2N2222A High Speed Switching Transistor
High Speed Switching Transistor Features: NPN Silicon Planar Switching Transistor. Fast switching devices exhibiting short turnoff and low saturation voltage characteristics. Switching and Linear application
MBR10xCT Series TO-220AB
10x Series Features: Plastic material. Metal silicon junction, majority carrier conduction. Low power loss, high efficiency. High current capability, low forward voltage drop. High surge capability. For
BZW06- Series DO-15. Mechanical Data. Page <1> 14/05/08 V1.1
DO-15 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 600W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low zener impedance.
DE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:
EN - For pricing and availability in your local country please visit one of the below links: DE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:
BZW04 Series. Features: DO-41. Mechanical Data. Page <1> 14/05/08 V1.1
DO-41 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 400W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low impedancesurge resistance.
No-Clean Flux Lead Free Tin/Silver/Copper Alloy
Features: Halide free version-typ 400. Mild odour. Fast soldering-range of activities to suit all applications. Clear residues. Good spread on copper, brass and nickel. Heat stable-low spitting. Multicomp
Equipment Wire. Specification: Primary Insulation Material : PVC. Specification Table. Page 1 16/04/08 V1.1. Reel Conductor Conductor Length (m)
Specification: Material : PVC. Brown BLACK M BROWN M RED M ORANGE M 0.078 0 1.05 0.3 0.5 10/0.1 YELLOW M GRN M BLUE M GREY M WHT M PINK M 0.22 1.2 1.4 7/0.2 BK Page 1 16/04/08 V1.1 Brown BN RD OE YW GN
Terminal Blocks. TBF Turrett Terminal Series. Specifications: Material: Page <1> 17/01/12 V1.1
s TBF Turrett Terminal Series Insulator : PBT, rated UL94V-0 : 300 V ac : 15 A : 500 MΩ : 22-14 AWG : -65 C to +125 C Dimensions : (Millimetres) Unless Otherwise Specified All Dimensions are (mm) A = 0.374
Surface Mount Resistor Kit 0603 Case Size
Specifications Table Type Power Rating Resistance Tolerance Nominal Resistance MC 0603 0.0625W (1/16W) ±1% 10Ω Ratings: Type MC 0603 Power Rating 0.0625W (1/16W) Max. Working Voltage 50V Max. Overload
SMD Power Inductors. Features: Applications: Figure 1. Figure 2. Page <1> 20/06/11 V1.1
Features: Ferrite based SMD inductor with lower core loss. Ideal for LCD driver, DSC/DVC, Notebook PC or High density board design. Operating temperature range -55 C to + 130 C. MCSDRH73B - Series High
Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.
Specifications Mechanical Mechanical Life Operating Force Environmental Operating Temperature Storage Temperature : 200mΩ max. 20,000 steps : 200gf-cm max. : -25 C to +80 C : -40 C to +85 C Material Base
Rocker and Paddle Switches
R2 Specifications: Contact rating : 5 A with resistant load at 120 V ac or 28 V dc 2 A with resistant load at 250 V ac Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 10 mω
Large Snap-In Electrolytic Capacitors HPR Series
Features: Highly reliable capacitors that has characteristics of high temperature 105ºC, and can withstand high ripple current Suitable for filter of industrial equipment, such as automatic machines, computers
Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.
MCRH2 MCRV2 MCRS2 Specifications Mechanical Mechanical Life : 200mΩ max. 20,000 steps Operating Force : 200gf-cm max. Environmental Operating Temperature : -25 C to +80 C Storage Temperature : -40 C to
Chip Resistors Pulse Withstanding
Features: Tolerance from ±0.5% to 5% High power rating Excellent pulse withstanding performance Improved working voltage ratings Standard package sizes of 0603 to 2512 Applications: Metering (Testing/Measurement)
Surface Mount Resistor Kit 0603 Case Size
Specifications Table Type Power Rating Resistance Tolerance Nominal Resistance MC 0603 0.0625W (1/16W) ±5% 10Ω Ratings: Type MC 0603 Power Rating 0.0625W (1/16W) Rated Current(Jumper) 1A Max. Overload
Pulse Withstanding Chip Resistors
Construction 1 Alumina Substrate Features: Tolerance from ±0.5% to 5%. High power rating. Excellent pulse withstanding performance. Improved working voltage ratings. Standard package sizes of 0805 to 2512.
Pushbutton Switches. Sub-Miniature. Specifications: Switch Function. Page <1> 08/10/11 V1.1. : Dependent upon content material
Specifications: Contact rating : Dependent upon content material Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 20 mω initial at 2-4 V dc 100 ma for both silver and gold plated
Thick Film Chip Resistor
Features: Small size and light weight. Highly reliable multilayer electrode construction. Compatible with all soldering process. Construction 1 Alumina Substrate 2 Bottom Electrode (Ag-Pd) 3 Top Electrode
Carbon Composition Resistor
Rating and Dimensions Dimensions : Millimetres Power Dimensions L D Lead d Maximum Rated Maximum Overload Dielectric Withstand Tolerance ±(%) R-Value 1/4 W 6.4 ±0.7 2.3 ±0.2 0.6 250 400 500 5 E-24 1/2
Darlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications Collector-emitter sustaining voltage - V CEO (sus) = 60 V (minimum) - TIP120, TIP125 80 V (minimum) - TIP121, TIP126
Carbon Film Fixed Resistor
Features Automatically insertable High quality performance Non-Flame type available Cost effective and commonly used Too low or too high values can be supplied on case to case basis Performance Specification
TIP120, 121, 122, 125, 126, 127
Features: Collector - emitter sustaining voltage - V CEO (sus) = 60 V (minimum) - TIP120, TIP125 80 V (minimum) - TIP121, TIP126 100 V (minimum) - TIP122, TIP127 Collector - emitter saturation voltage
BDW93C, BDW94C Series
Features Designed for general-purpose amplifier and low speed switching applications Collector-emitter sustaining voltage- CEO (sus) = (Minimum) Collector-emitter saturation voltage- CE (sat) = 2 (Maximum)
Darlington Transistors
Features: Designed for general-purpose amplifier and low speed switching applications Collector-Emitter sustaining voltage V CEO (sus) = 60 V (Minimum) - TIP45 = 80 V (Minimum) - TIP4, TIP46 = 00 V (Minimum)
Metal Film Resistor Kit
Ratings: Rated Power 0.5W at 70 C Max. Working Voltage 350V Max. Overload Voltage 700V Dielectric Withstanding Voltage 700V Rated Ambient Temp. 70 C Operating Temp. Range -55 C to +155 C Resistance Tolerance
Metal Film Resistor Kit
Ratings: Rated Power 0.25W at 70 C Max. Working Voltage 250V Max. Overload Voltage 500V Dielectric Withstanding Voltage 500V Rated Ambient Temp. 70 C Operating Temp. Range -55 C to +155 C Resistance Tolerance
Ceramic Disc Capacitors, X7R
Mechanical Available lead code: (unit : mm) Lead type P/N Digits (F) Lead Length (L) Available Rated Voltage Packing Lead Configuration Lead Style : B Straight Long Lead B20C7 7.5 ± 1 20 Min. 1 KV, 2 KV
Wire Wound Chip Inductor
Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
Sub-Miniature Cable. Specifications: Page <1> 05/04/12 V1.1
: Sub-miniature cable, 7-1-2C, to Def Stan 61-12 (Part 4) : 0.055 mm 2 (7/0.1 mm) tinned annealed copper wires to BS 6360 (as far as applicable), class 5 : Number of wires = 7 : Maximum resistance at 20
Metal Film Fixed Resistor
Specifications: Type : MCMF Rated Power : 0.25W at 70 C Max. Working Voltage : 250V Max. Overload Voltage : 500V Dielectric Withstanding Voltage : 500V Rated Ambient Temp : 70 C Operating Temp. Range :
H05Z-K / H07Z-K BS EN LSZH Wire
Application: In pipes or ducts and internal wiring of appliances with maximum operating temperatures of 90 C, and generally in areas (such as public and government buildings) where smoke and toxic fumes
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3028
POSEIDON SCIENIIC INSRUMENS PY D 17 QUEEN VICORIA S, REMANE WA 10. PHONE (0) 90 9 AX (0) 9 0 CAE DRAWING: MWA-02 DRAWING IE: PSU DC Power Cable DRAWING NO.: MWACA-002 DRAWN Y: DRC DAE: 2-Nov- SHEE: 1 of
Power Metal Fixed Resistors
Type Designation: (EX.) The type designation shall be in the following form: Type Power Rating Resistance Tolerance Nominal Resistance MCPMR 1W-SSS < 1 Ω : 0.6 W 1 Ω : 1 W J 0.56 Ω 1 Ω Ratings: Ratings
Darlington Transistor TO-3
Description Designed for use as output devices in complementary general purpose amplifier applications. Features: High gain darlington performance High DC current gain hfe = 1,000 (Minimum) at Ic = 20A
Switchgear Wire. Specification Table. Page <1> 31/08/10 V1.0. : Varies with colour and packing.
Description : 16mm² Flex Plain Copper, PVC Insulated, 600/1000V, Type BK, BS 6231. Conductors* : 16mm² (approx. 126/0.4mm) plain annealed copper bunch meeting the requirements of BS 6360, class 5. : Maximum
Automated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software APPLICATION NOTE
Automated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software Introduction For undergraduate students in colleges and universities, frequency response testing
Tri-Rated Flexible PVC Equipment Wire
Application: High temperature, flame retardant wire designed for use in the switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier
High Power 6W LED. Package Dimensions: Features: Applications: Absolute Maximum Ratings at Ta=25 C.
Package Dimensions: Features: Excellent transiting heat from LED chip operating under 350mA High luminous output No UV Applications: Reading lights Portable flashlight Uplighters & downlighters Garden
Complementary Pair Enhancement Mode Field Effect Transistor
Features: Low OnResistance Low Gate Threshold oltage Low Input Capacitance Fast Switching Speed Low Input / Output Leakage Complementary Pair SOT363 Maximum Ratings: Total Device Ratings at 25 C unless
Metal Oxide Varistors
Straight Lead Dimensions Table Series 5D 7D 10D 14D 20D D max 7 9.5 14 17.5 24 d* 0.6 0.6 0.8 0.8 1 W** 5 5 7.5 7.5 10 H max 12.5 14.5 20 22.5 29.5 H1 max 10 12 17 20.5 28 T max 4.9 4.9 8.5 8.5 9 P max
High Power 6W LED. Package Dimensions: Features: Applications: Absolute Maximum Ratings at Ta=25 C.
Package Dimensions: Features: Excellent transiting heat from LED chip operating under 350mA High luminous output No UV Applications: Reading lights Portable flashlight Uplighters & downlighters Garden
High Precision Thin Film Chip Resistor
Description: The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top
Verifying Power Supply Sequencing with an 8-Channel Oscilloscope APPLICATION NOTE
Verifying Power Supply Sequencing with an 8-Channel Oscilloscope Introduction In systems that rely on multiple power rails, power-on sequencing and power-off sequencing can be critical. If the power supplies
SMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.
Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent
P-Channel Enhancement Mode Vertical D-MOS Transistor
Features: Voltage Controlled P-Channel Small signal switch High Density Cell Design for Low RDS(ON) High Saturation Current SOT-23 Applications: Line Current Interrupter in Telephone Sets Relay, High Speed
2SE SERIES Solid-State Vane Switch
2SE SERIES Solid-State Vane Switch Introduction The Klixon 2SE solid state vane switch has advanced, state-of-the-art airflow sensing. Successor to electromechanical vane types, the 2SE is designed to
STEVAL-ISQ010V1. High-side current-sense amplifier demonstration board based on the TSC102. Features. Description
High-side current-sense amplifier demonstration board based on the TSC102 Data brief Features Independent supply and input common-mode voltages Wide common-mode operating range: 2.8 V to 30 V Wide common-mode
TDA7231A 1.6W AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LOW QUIESCENT CURRENT HIGH POWER CAPABILITY LOW CROSSOVER DISTORTION SOFT CLIPPING
1.6 AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LO QUIESCENT CURRENT. HIGH POER CAPABILITY LO CROSSOVER DISTORTION SOFT CLIPPING DESCRIPTION The is a monolithic integrated circuit in 4 + 4 lead minidip
16-2-C Series. Specification Table. Page <1> 19/06/10 V1.0. : Varies with colour and packing.
: Varies with colour and packing. Description : Sub-miniature Cable, 16-2-1C, to Def Stan 61-12 (Part 6). Conductors : 0.5mm² tinned annealed copper wires to IEC 60228, (as far as applicable), class 5.
Treasury and Trade Solutions Citi Commercial Cards. A History of Achievement. A Future of Innovation. May 19-21, 2014
Treasury and Trade Solutions Citi Commercial Cards A History of Achievement. A Future of Innovation. May 19-21, 2014 Communicating and Marketing Your Program Internally Pauline Smith Carla Vitaliano, The
L4940xx5 L4940V5 L4940D2T5-TR 5 V L4940xx85 L4940V85 L4940P85 L4940D2T85-TR 8.5 V L4940xx10 L4940D2T10-TR 10 V L4940xx12 L4940D2T12-TR 12 V
Very low drop 1.5 A regulator Features Precise 5, 8.5, 10, 12 V outputs Low dropout voltage (450 mv typ. at 1 A) Very low quiescent current Thermal shutdown Short circuit protection Reverse polarity protection
Simplifying DC-DC Converter Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope APPLICATION NOTE
Simplifying DC-DC Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope Introduction DC-DC converters are widely used electronic components that convert
KickStart Instrument Control Software Datasheet
KickStart Instrument Control Software Datasheet Key Features Built-in I-V characterizer, datalogger, and precision DC power applications Optional high resistivity measurement application that complies
BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors
BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with
Simplifying FET Testing with 2600B System SourceMeter SMU Instruments APPLICATION NOTE
Simplifying FET Testing with 2600B System SourceMeter SMU Instruments Introduction Field effect transistors (FETs) are important semiconductor devices with many applications because they are fundamental
BTA10-600GP. 10 A Triac. Features. Description
10 A Triac Features Low I H : 13 ma max High surge current: I TSM = 120 A I GT specified in four quadrants Insulating voltage: 2500 V (RMS) (UL Recognized: E81734) G A2 A1 Description The BTA10-600GP uses
AN1736 Application note VIPower: VIPer22A dual output reference board 90 to 264 VAC input, 10W output Introduction
Application note VIPower: VIPer22A dual output reference board 90 to 264 VAC input, 10W output Introduction This is an off-line wide range VIPer22A dual outputs power supply at a switching frequency of
Obsolete Product(s) - Obsolete Product(s) Obsolete Product(s) - Obsolete Product(s)
5 A low dropout fast response positive voltage regulator adjustable Features Typical dropout 1.2 V Fast transient response Three terminal adjustable Guaranteed output current up to 5 A Output tolerance
Frame through-beam sensors
Frame through-beam sensors Features Wide range of sizes: passage sizes from 25 x 23 mm to 300 x 397.5 mm Metal housings Integrated evaluation unit Connection by means of connector Degree of protection
R 1 typ. = 15 kω. Order codes Marking Polarity Package Packaging. 2N6036 2N6036 NPN SOT-32 Tube 2N6039 2N6039 PNP SOT-32 Tube
2N6036 2N6039 Complementary power Darlington transistors Features. Good h FE linearity High f T frequency Monolithic Darlington configuration with integrated antiparallel collector-emitter diode Applications
OPERATING INSTRUCTIONS AND SPECIFICATIONS. NI 9207E 16-Channel, ±20 ma/±10 V, 24-Bit Analog Input Module
OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9207E 16-Channel, ±20 ma/±10 V, 24-Bit Analog Input Module This document describes how to use the National Instruments 9207E and includes dimensions, pin assignments,
FBR46 SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. High surge
Keysight Technologies 8490G Coaxial Attenuators. Technical Overview
Keysight Technologies 8490G Coaxial Attenuators Technical Overview Introduction Key Specifications Maximize your operating frequency range for DC to 67 GHz application Minimize your measurement uncertainty
EVL6566B-40WSTB demonstration board 40 W wide input range flyback converter for digital consumer equipments using the L6566B
EVL6566B-40WSTB demonstration board 40 W wide input range flyback converter for digital consumer equipments using the L6566B Features Input voltage: Vin: 90-264 Vrms, f: 45-66 Hz Output voltages: 1.8 V/1.73
SPAC265-8W. AC-DC power supply module. Features. Description. Applications
AC-DC power supply module Datasheet production data Features Open frame switch mode power supply European input voltage range Single output 5 V, 8 W peak power, 4 W continuous operating mode EMC compliance
TS V micropower shunt voltage reference. Features. Applications. Description
2. micropower shunt voltage reference Features 2.5 typical output voltage Ultra low current consumption: 4µA typ. High precision @ 25 C ±2% (standard version) ±1% (A grade) High stability when used with
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) VSB SERIES FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
Process-Controller HPP-25
Process-Controller HPP-25 Riveting process monitoring 6 different control parameters Touchscreen operation Windows diagnostics software... joining is our business Process-Controller HPP-25 Riveting process
SMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band.
SMA/DO-214AC Features: For surface mounted application. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time : typically less than 1.0ps
Obsolete Product(s) - Obsolete Product(s)
10 W car radio audio amplifier Datasheet production data Features Improved performance over the TDA2002 (pinto-pin compatible) Very low number of external components Ease of assembly Cost and space savings
EVAL-RHF310V1. EVAL-RHF310V1 evaluation board. Features. Description
evaluation board Data brief Features Mounted Engineering Model RHF310K1: Rad-hard, 120 MHz, operational amplifier (see RHF310 datasheet for further information) Mounted components (ready-to-use) Material:
SPV1001T40. Cool bypass switch for photovoltaic application. Features. Application. Description TO-220
Cool bypass switch for photovoltaic application Features I F =16 A, V R = 40 V Very low forward voltage drop Very low reverse leakage current 150 C operating junction temperature +4 Application Photovoltaic
AN3360 Application note
Application note 3.2 W LED power supply based on HVLED805 Introduction This application note describes the demonstration board of the all-primary sensing switching regulator HVLED805 and presents the results
PRODUCT DATA. Piezoelectric Accelerometer Miniature Triaxial DeltaTron Accelerometers Types 4524, 4524 B
PRODUCT DATA Piezoelectric Accelerometer Miniature Triaxial DeltaTron Accelerometers Types 4524, 4524 B Types 4524 and 4524 B are lightweight triaxial piezoelectric OrthoShear accelerometers, each with
L4940 SERIES VERY LOW DROP 1.5A REGULATORS
L4940 SERIES VERY LOW DROP 1.5A REGULATORS PRECISE 5, 8.5, 10, 12V OUTPUTS LOW DROPOUT VOLTAGE (500mV Typ. at 1.5A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY
STEVAL-CCA040V1. 4X10 Watt dual/quad power amplifier demonstration board based on the STA540SAN. Features. Description
4X10 Watt dual/quad power amplifier demonstration board based on the STA540SAN Features High output-power capability: 4x10 W / 4 Ω at 17 V, 1 KHz, THD = 10% 2x26 W / 4 Ω at 14.4 V, 1 KHz, THD = 10% 2x15
EM Insights Series. Episode #1: QFN Package. Agilent EEsof EDA September 2008
EM Insights Series Episode #1: QFN Package Agilent EEsof EDA September 2008 Application Overview Typical situation IC design is not finished until it is packaged. It is now very important for IC designers
SPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements
BD235 BD237. Low voltage NPN power transistors. Features. Applications. Description. Low saturation voltage NPN transistors
BD235 BD237 Low voltage NPN power transistors Features Low saturation voltage NPN transistors Applications Audio, power linear and switching applications Description The devices are manufactured in Planar
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES RoHS compliant FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL pitch terminals
UM0920 User manual. 4 W non-isolated, wide input-voltage range SMPS demonstration board based on the VIPer16. Introduction
User manual 4 W non-isolated, wide input-voltage range SMPS demonstration board based on the VIPer16 Introduction The purpose of this document is to provide information for the STEVAL-ISA071V2 switched
L4941 VERY LOW DROP 1A REGULATOR
VERY LOW DROP 1A REGULATOR LOW DROPOUT VOLTAGE (450mV Typ. at 1A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY PROTECTION DESCRIPTION The L4941 is a three terminal