SA SERIES Taiwan Semiconductor
|
|
- Flora Miles
- 5 years ago
- Views:
Transcription
1 500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt to V BR for unidirectional and 5.0ns for bidirectional - Typical I R less than 1μA above 10V - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC MECHANICAL DATA Case: DO-204AC (DO-15) Molding compound: UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Pure tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Weight: 0.4g (approximately) DO-204AC (DO-15) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (T A =25 C unless otherwise noted) PARAMETER Peak power dissipation at T A =25 C, Tp=1ms (Note 1) SYMBOL P PK VALUE 500 UNIT W Steady state power dissipation at T L =75 C lead lengths.375", 9.5mm (Note 2) P D 3 W Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (Note 3) I FSM 70 A instantaneous forward voltage at 35 A for Unidirectional only V F 3.5 V Operating junction temperature range Storage temperature range T J T STG - 55 to to +175 C C Note 1: Non-repetitive current pulse per fig. 3 and derated above T A =25 C per fig. 2 Note 2: Mounted on 10 x 10 mm copper pads to each terminal Note 3: 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum Devices for Bipolar Applications 1. For bidirectional use C or CA suffix for types SA5.0 - types SA Electrical characteristics apply in both directions
2 ORDERING INFORMATION PACKAGE PACKING SUFFIX SUFFIX (*) A0 DO-15 1,500 / Ammo box SAxxx H R0 G DO-15 3,500 / 13" Paper reel (Note 1) B0 DO-15 1,000 / Bulk packing Note 1: "xxx" defines voltage from 5.0V (SA5.0) to 170V (SA170) *: Optional available EXAMPLE EXAMPLE SUFFIX SUFFIX SA10HA0G SA10 H A0 G DESCRIPTION AEC-Q101 qualified Green compound
3 RATINGS AND CHARACTERISTICS CURVES (T A =25 C unless otherwise noted) P PPM, PEAK PULSE POWER, KW PPK".5" PPK PPK FIG. 1 PEAK PULSE POWER RATING CURVE IMPULSE EXPONENTIAL DECAY HALF SINE SQUARE ,000 10,000 tp, PULSE WIDTH, sec Non-repetitive pulse waveform shown in fig.3 PEAK POWER (P PP ) DERATING IN PERCENTAGE, % FIG.2 POWER DERATING CURVE T L T A TEMPERATURE, ( C) PEAK PULSE CURRENT- % FIG. 3 CLAMPING POWER PULSE WAVEFORM td tr=10μs Peak value I PPM Pulse width(td) is defined as the point where the peak current decays to 50% of I PPM Half value-i PPM /2 10/0μs, waveform as defined by R.E.A t, TIME(ms) IFSM, PEAK FORWARD SURGE CURRENT, AMPERES 10 FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 8.3ms single half sine wave 1 10 NUMBER OF CYCLES AT 60 Hz FIG. 5 TYPICAL JUNCTION CAPACITANCE (UNIDIRECTIONAL) 00 C J, JUNCTION CAPACITANCE. (pf) A 0 10 f=1.0mhz Vsig=50mVp-p Measured at stand-off voltage,v WM VR= V( BR ), BREAKDOWN VOLTAGE. VOLTS
4 Breakdown (Note 1) Test Stand-Off Reverse V WM Peak Surge I PPM Temperature Coefficient General Part Number V BR I T V WM I R I PPM Vc V BR V ma V μa A V mv / C Min. Max. (Note 2) SA SA5.0A SA SA6.0A SA SA6.5A SA SA7.0A SA SA7.5A SA SA8.0A SA SA8.5A SA SA9.0A SA SA10A SA SA11A SA SA12A SA SA13A SA SA14A SA SA15A SA SA16A SA SA17A SA SA18A SA SA20A SA SA22A SA SA24A SA SA26A SA SA28A SA SA30A SA SA33A
5 General Part Number Breakdown (Note 1) V BR Test Stand-Off Reverse V WM Peak Surge I PPM Temperature Coefficient I T V WM I R I PPM Vc V BR V ma V μa A V mv / C Min. Max. (Note 2) SA SA36A SA SA40A SA SA43A SA SA45A SA SA48A SA SA51A SA SA54A SA SA58A SA SA60A SA SA64A SA SA70A SA SA75A SA SA78A SA SA85A SA SA90A SA SAA SA SA110A SA SA120A SA SA130A SA SA150A SA SA160A SA SA170A Notes: 1. V BR measure after I T applied for 300us, I T =square wave pulse or equivalent. 2. Surge current waveform per figure. 3 and derate per figure For bipolar types having V WM of 10 volts and under, the I R limit is doubled. 4. All terms and symbols are consistent with ANSI/IEEE C62.35.
6 PACKAGE OUTLINE DIMENSIONS DO-204AC (DO-15) DIM. Unit (mm) Unit (inch) Min Max Min Max A B C D E MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Note: Cathode band for uni-directional products only
7 Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale.
P6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More informationSMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
More information6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More information400W, 10V - 100V Surface Mount Transient Voltage Suppressor
400W, 10V - V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q101 qualified Low profile package Photo Glass passivated junction Excellent clamping capability Moisture sensitivity level: level
More information4 1N4001G-K - 1N4007G-K Taiwan Semiconductor. 1A, 50V V Glass Passivated Rectifier
4 N400 - N4007 A, 50V - 00V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low VF High reliability High surge current capability Low power loss, high efficiency
More information2A, 800V V Glass Passivated High Efficient Rectifier
2A, 800V - 1000V Glass Passivated High Efficient Rectifier FEATURES Glass passivated chip junction High efficiency, Low V F High current capability High surge current capability Low power loss Compliant
More information10A, 100V - 200V Trench Schottky Rectifier
A, 0V - 200V Trench Schottky Rectifier TSDH0CW - TSDH200CW FEATURES - Patented Trench Schottky technology - Excellent high temperature stability - Low forward voltage - Low power loss/ high efficiency
More information4 1N5400G-K - 1N5408G-K Taiwan Semiconductor. 3A, 50V V Glass Passivated Rectifier
4 1N5400-1N5408 3A, 50V - 0V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low V F High reliability High surge current capability Low power loss, high efficiency
More information3000W, 10V - 100V Surface Mount Transient Voltage Suppressor
3000W, 10V - V Surface Mount Transient Voltage Suppressor FEATURES Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps Compliant
More information2A, 50V - 600V Glass Passivated Super Fast Rectifier
SF21 - SF28 2A, 50V - 600V Glass Passivated Super Fast Rectifier FEATURES Glass passivated chip junction High efficiency, Low V F High current capability High surge current capability Low power loss Compliant
More information30A, 100V - 200V Trench Schottky Rectifiers
30A, 0V - 200V Trench Schottky Rectifiers TSD30H0CW - FEATURES - Patented Trench Schottky technology - Excellent high temperature stability - Low forward voltage - Low power loss/ High efficiency - High
More information8A, 20V - 100V Surface Mount Schottky Barrier Rectifier
82C - 8C 8A, 20V - 0V Surface Mount Schottky Barrier Rectifier FEATURES Low power loss, high efficiency Ideal for automated placement Guard ring for over-voltage protection High surge current capability
More informationTrench Schottky Rectifier
Trench Schottky Rectifier TST40L0CW thru FEATURES - Patented Trench Schottky technology - Excellent high temperature stability - Low forward voltage - Low power loss/ high efficiency - High forward surge
More information5A, 20V - 200V Surface Mount Schottky Barrier Rectifier
52C - 520C 5A, 20V - 200V Surface Mount Schottky Barrier Rectifier FEATURES Low power loss, high efficiency Ideal for automated placement Guard ring for over-voltage protection High surge current capability
More information20A, 300V Trench Schottky Rectifier
20A, 300V Trench Schottky Rectifier FEATURES Patented Trench Schottky technology Excellent high temperature stability Low forward voltage Low power loss/ High efficiency High forward surge capability Compliant
More information1A, 50V V Glass Passivated Rectifier
A, 50-000 Glass Passivated Rectifier FEATURES Glass passivated chip junction Excellent high temperature switching High efficiency, low F Ultrafast recovery time for high efficiency Compliant to RoHS Directive
More information3A, 20V - 200V Surface Mount Schottky Barrier Rectifier
32-320 3A, 20V - 200V Surface Mount Schottky Barrier Rectifier FEATURES Low power loss, high efficiency Ideal for automated placement Guard ring for over-voltage protection High surge current capability
More informationGlass Passivated Bridge Rectifiers
FEATURES - Glass passivated junction - Typical I R less than.2μa - High surge current capability - UL Recognized File # E-326243 CREAT BY ART - Integrally molded heatsink provide very low thermal resistance
More information5A, 50V V Surface Mount Rectifier
5A, 50V - 000V Surface Mount Rectifier FEATURES Glass passivated chip junction Ideal for automated placement Low forward voltage drop High current capability High surge current capability Compliant to
More information5000W, 16V - 100V Surface Mount Transient Voltage Suppressor
5000W, 16V - 100V Surface Mount Transient Voltage Suppressor FEATURES 5000 watts peak pulse power capability at 10/1000μs waveform Ideal for automated placement Photo glass passivated junction Excellent
More informationCREAT BY ART 1A, 30V - 60V Surface Mount Schottky Barrier Rectifiers V RRM I F(AV)
A, 30V - 60V Surface Mount Schottky Barrier Rectifiers SS3M - SS6M FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Compliant to
More information0.8A, 200V - 600V Miniature Glass Passivated Fast Recovery Surface Mount Bridge Rectifier
0.8A, 200V - 600V Miniature Glass Passivated Fast Recovery Surface Mount Bridge Rectifier FEATURES Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge
More information3A, 20V - 200V Surface Mount Schottky Barrier Rectifier
4 32A - 320A 3A, 20V - 200V Surface Mount Schottky Barrier Rectifier FEATURES Low power loss, high efficiency Ideal for automated placement Guard ring for over-voltage protection High surge current capability
More information20A, 100V - 200V Trench Schottky Rectifier
TSSD20L0SW - 20A, 0V - 200V Trench Schottky Rectifier FEATURES Patented Trench Schottky technology Low power loss/ high efficiency Ideal for automated placement Guard ring for over-voltage protection High
More information2A, 600V Surface Mount Super Fast Rectifier
2A, 600V Surface Mount Super Fast Rectifier FEATURES Fast forward recovery time for high frequency operation Negligible switching losses Reduces switching and conduction losses High surge current capability
More information2A, 100V - 200V Surface Mount Ultra Fast Rectifier
2A, 0V - 200V Surface Mount Ultra Fast Rectifier FEATURES Glass passivated junction chip Ideal for automated placement Low profile package Ultra fast recovery time for high efficiency Compliant to RoHS
More information1A, 400V ESD Capability Rectifier
A, 400V ESD Capability Rectifier FEATURES High ESD capability Glass passivated chip junction Ideal for automated placement Low forward voltage drop High surge current capability Compliant to RoHS Directive
More information3A, 50V - 600V Surface Mount Ultrafast Power Rectifier
305S - 360S 3A, 50V - 600V Surface Mount Ultrafast Power Rectifier FEATURES Glass passivated junction Ideal for automated placement Built-in strain relief Ultrafast recovery time for high efficiency Compliant
More information2A, 1000V Glass Passivated Bridge Rectifier
2A, 000V Glass Passivated Bridge Rectifier FEATURES Glass passivated junction Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge current capability
More information1SMA4737-1SMA200Z Taiwan Semiconductor
CREAT BY ART W, 7.5V - 200V Surface Mount Silicon Zener Diodes SMA4737 - SMA200Z FEATURES - Built-in strain relief - Ideal for automated placement - Glass passivated junction - Low inductance - Typical
More information10A, 100V - 200V Trench Schottky Rectifier
- TSSDL200SW A, 0V - 200V Trench Schottky Rectifier FEATURES Patented Trench Schottky technology Low power loss / high efficiency Ideal for automated placement Guard ring for over-voltage protection High
More information0.8A, 600V V Glass Passivated Bridge Rectifier
MBS6-K - MBS-K 0.8A, 600V - 00V Glass Passivated Bridge Rectifier FEATURES Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge current capability
More information3A, 45V - 60V Trench Schottky Rectifier
3A, 45V - 60V Trench Schottky Rectifier FEATURES Patented Trench Schottky technology Excellent high temperature stability Low forward voltage Lower power loss/ high efficiency High forward surge capability
More information2A, 50V V High Efficient Surface Mount Rectifier
2A, 50V - 1000V High Efficient Surface Mount Rectifier FEATURES Low power loss, high efficiency Ideal for automated placement Glass passivated junction chip Fast switching for high efficiency Compliant
More information5A, 20V - 150V Surface Mount Schottky Barrier Rectifier
5A, 20-50 Surface Mount Schottky Barrier Rectifier FEATURES Low power loss, high efficiency Ideal for automated placement Guard ring for over-voltage protection High surge current capability Compliant
More information3A, 20V - 200V Surface Mount Schottky Barrier Rectifier
32B - 320B 3A, 20-200 Surface Mount Schottky Barrier Rectifier FEATURES Low power loss, high efficiency Ideal for automated placement Guard ring for over-voltage protection High surge current capability
More information200mW, V High Voltage SMD Switching Diode
200mW, 120-250V High Voltage SMD Switching Diode FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Compliant to RoHS directive 2011/65/EU and in accordance
More informationSuface Mount Transient Voltage Suppressor
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from
More informationGlass Passivated Bridge Rectifier
Glass Passivated Bridge Rectifier UR3KB60 - UR3KB00 FEATURES Ideal for printed circuit board High case dielectric strength High surge current capability UL Recognized File # E-326243 Compliant to RoHS
More information8A, 400V V Surface Mount Glass Passivated Rectifier
8A, 400V - 00V Surface Mount Glass Passivated Rectifier FEATURES Low forward voltage drop Ideal for automated placement High surge current capability Compliant to RoHS Directive 2011/65/EU and in accordance
More information1W, 10V - 200V Glass Passivated Junction Silicon Zener Diodes
W, V - 2V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Low profile package - Built-in strain relief - Low inductance - Typical I R less than 5μA above V -
More informationSurface Mount Silicon Zener Diodes
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance CREAT BY ART - Moisture sensitivity level: level, per J-STD-2 - Compliant
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More informationTrench Schottky Rectifier
creat by AR 0C thru 200C FEATURES - Patented Trench Schottky technology - Excellent high temperature stability - Low forward voltage - Low power loss/ High efficiency - High forward surge capability -
More information100mA, 75V Switching Diode
ma, 75V Switching Diode FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
More information3A, 400V V Glass Passivated Bridge Rectifier
304G - 307G 3A, 400V - 000V Glass Passivated Bridge Rectifier FEATURES Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique High surge current capability UL
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
More information1.5A, 200V V Surface Mount Rectifiers
SDLW - SMLW.5A, 200V - 000V Surface Mount Rectifiers FEATURES Ideal for automated placement Compact package size High surge current capability Low power loss, high efficiency Compliant to RoHS Directive
More informationTrench Schottky Rectifier
Trench Schottky Rectifier TST30L0CW thru FEATURES - Patented Trench Schottky technology - Excellent high temperature stability - Low forward voltage - Low power loss/ high efficiency - High forward surge
More informationPARAMETER SYMBOL TESD5V0V4UA UNIT Marking code on the device
V WM =5V,.8pF ESD Protection Array FEATURES Meet IEC61-4-2(ESD) ±17kV(air), ±12kV(contact) Working Voltage: 5V Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC Halogen-free according
More information1500W, 6.8V - 200V Surface Mount Transient Voltage Suppressor
1500W, 6.8V - 200V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically
More information2A, 50V - 600V Surface Mount Super Fast Rectifier
2A, 50-600 Surface Mount Super Fast Rectifier FEATURES Glass passivated junction chip Ideal for automated placement Low profile package Super fast recovery time for high efficiency Compliant to RoHS Directive
More information1A, 50V - 600V Surface Mount Ultrafast Power Rectifier
5S - 60S A, 50-600 Surface Mount Ultrafast Power Rectifier FEATURES Glass passivated chip junction Ideal for automated placement Ultrafast recovery time for high efficiency Low forward voltage, low power
More information1.5A, 1000V Miniature Fast Recovery Glass Passivated Surface Bridge Rectifier
RABS5M.5A, 000 Miniature Fast Recovery Glass Passivated Surface Bridge Rectifier FEATURES - Ideal for automated placement, for compact PCB design - High surge current capability - Ultrafast reverse recovery
More information200mW High Speed SMD Switching Diode
200mW High Speed SMD Switching Diode FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Compliant to RoHS directive 20/65/EU and in accordance to WEEE
More information5W, 15V Surface Mount Zener Diode
5W, 15V Surface Mount Zener Diode FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Compliant to RoHS Directive 2011/65/EU and in accordance to
More information500mW High Speed SMD Switching Diode
5mW High Speed SMD Switching Diode FEATURES - Designed for mounting on small surface - Extremely thin/leadless package - High mounting capability, strong surage with stand, high reliability - Pb free and
More information1W, 6.8V - 220V Voltage Regulator Diode
1W, 6.8V - 220V Voltage Regulator Diode FEATURES Silicon zener diodes Low profile surface-mount package Zener and surge current specification Low leakage current Excellent stability Compliant to RoHS Directive
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More information3W, 11V - 200V Surface Mount Silicon Zener Diode
3W, 11V - 200V Surface Mount Silicon Zener Diode FEATURES Photo Glass passivated junction Low profile package Ideal for automated placement Built-in strain relief Low inductance Compliant to RoHS Directive
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More information3A, 50V V High Efficient Surface Mount Rectifier
4 3AB - 3MB 3A, 50-0 High Efficient Surface Mount Rectifier FEATURES Low power loss, high efficiency Low forward voltage drop Low profile package Fast switching for high efficiency Ideal for automated
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR
More informationSurface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions
Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Patented* *Patent #'s 4,980,315 5,166,769 5,278,094 DO-214AA (SMB) FEATURES Patented PAR
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-28AB PRIMARY CHARACTERISTICS V BR 27 V P PPM ( x μs) 36 W P D 5 W V WM 22 V I RSM 7 A I FSM
More informationHigh Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to
More informationNew Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More information300mW, NPN Small Signal Transistor
300mW, NPN Small Signal Transistor FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Compliant to RoHS directive 2011/65/EU and in accordance to WEEE
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More information15A, 45V - 200V Dual Common Cathode Schottky Rectifiers
CRET BY RT 45-200 5, 45V - 200V Dual Common Cathode Schottky Rectifiers FETURES - Low power loss, high efficiency - Guardring for overvoltage protection - High surge current capability - Compliant to RoHS
More informationSurface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions
Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Patented* *Patent #'s 4,980,315 5,166,769 5,278,094 DO-214AA (SMB) FEATURES Patented PAR
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions SMB (DO-214AA) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM 600 W I FSM
More informationMSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES. Series.
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series Top View Bottom View PRIMARY CHARACTERISTICS V WM 3.3 V to 5. V V BR 4.1 V to 7.7 V P PPM 15 W T J max. 15 C Polarity Uni-directional Package
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More information300mW, NPN Small Signal Transistor
300mW, NPN Small Signal Transistor FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Compliant to RoHS directive 2011/65/EU and in accordance to WEEE
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR 7.5 V to 12 V) 3 W P
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationSchottky Barrier Rectifier
Schottky Barrier Rectifier TO-0AC ITO-0AC FEATURES Low power loss, high efficiency Low forward voltage drop High forward surge capability High frequency operation MBR0xx MBRF0xx Meets MSL level, per J-STD-00C,
More informationDistributed by: www.jameco.com -8-83-4242 The content and copyrights of the attached material are the property of its owner. Miniature Glass Passivated Ultrafast Bridge Rectifier Case Style DFM PRIMARY
More information0.3W, PNP Plastic-Encapsulate Transistor
0.3W, PNP Plastic-Encapsulate Transistor FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Compliant to RoHS directive 2011/65/EU and in accordance to
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More information