SA Series. Working Voltage: 5.0 to 190 V Peak Pulae Power: 500 W 500W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DO-15 PACKAGE
|
|
|
- Gwendoline Conley
- 5 years ago
- Views:
Transcription
1 Working : 5.0 to 190 V Peak Pulae Power: 500 W Features Glass passivated chip 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time DO-15 (Cathode band Only Uui-polarity product) 1.00(25.4)MIN..034(0.90).028(0.70) Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-202, method 208 guranteed Polarity: Color band denotes cathode end except Bipolar Mounting position: Any.300(7.63).230(5.80) 1.00(25.4)MIN..142(3.61).102(2.60) Dimensions in inches and (millimeters) Maximum Ratings(TA=25 unless otherwise noted) Parameter Peak power dissipation with a 10/1000μs waveform (1) Peak pulse current wih a 10/1000μs waveform (1) Power dissipation on infinite heatsink at T L = 75 C Peak forward surge current, 8.3 ms single half sinewave unidirectional only (2) Maximum instantaneous forward voltage at 25 A for unidirectional only (3) Operating junction and storage temperature range Symbol P PP I PP P D I FSM V F T J, T STG Value 500 See Next Table / to +150 Note: (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 per Fig.1 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. (3)VF<3.5V for devices Of VBR<200V and VF<5.0V for devices of VBR>201V UNIT W A W A V C
2
3 UNI-POLAR Part No. BI-POLAR Stand- Off V RWM (V) I T I T Test I T (ma) Max Clamping V C I PP Peak Pulse I PP (A) Leakage I R V RWM SA5.0A SA5.0CA SA6.0A SA6.0CA SA6.5A SA6.5CA SA7.0A SA7.0CA SA7.5A SA7.5CA SA8.0A SA8.0CA SA8.5A SA8.5CA SA9.0A SA9.0CA SA10A SA10CA SA11A SA11CA SA12A SA12CA SA13A SA13CA SA14A SA14CA SA15A SA15CA SA16A SA16CA SA17A SA17CA SA18A SA18CA SA19A SA19CA SA20A SA20CA SA22A SA22CA SA24A SA24CA SA26A SA26CA SA28A SA28CA SA30A SA30CA SA33A SA33CA SA36A SA36CA SA40A SA40CA SA43A SA43CA SA45A SA45CA SA48A SA48CA SA51A SA51CA SA54A SA54CA SA58A SA58CA SA60A SA60CA SA64A SA64CA SA70A SA70CA SA75A SA75CA SA78A SA78CA SA80A SA80CA
4 UNI-POLAR BI-POLAR SA85A SA85CA SA90A SA90CA SA100A SA100CA SA110A SA110CA SA120A SA120CA SA130A SA130CA SA140A SA140CA SA150A SA150CA SA160A SA160CA SA170A SA170CA SA180A SA180CA SA190A SA190CA Note: Part No. Stand- Off V RWM (V) I T I T 1. Add suffix "CA" after Part number to specify Bi-directional devices. Test I T (ma) Max Clamping V C I PP 2. For Bi-directional devices having VRWM of 10 voltages and under, the IR limit is doubled. Peak Pulse I PP (A) Leakage I R V RWM
5 Ordering Information: Device PN Packing Part Number -F (1) G (2) -WS Tape & Ammo Packing:2000pcs/box Part Number -T (1) G (2) -WS Tape & Reel Packing :4000pcs/Reel Part Number -B (1) G (2) -WS Bulk Packing: 500pcs/Box Note: 1. Packing code, F: Tape & Ammo Packing; T: Tape & Reel Packing; B: Bulk Packing 2. RoHS product for packing code suffix G, Halogen free product for packing code suffix "H". ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures.
Rev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB(DO-214AA) PACKAGE. SMBJ Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 440 V Peak Pulae Power: 600 W SMB (DO-214AA) Features Glass passivated chip 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage
30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
200W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR. SMF Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 190 V Peak Pulse Power: 200 W Features Glass passivated chip 200 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
SILICON RECTIFIER SYMBOL. UNITS Maximum Recurrent Peak Reverse Voltage V RRM V RMS V DC I O I FSM I 2 T C J
SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 3. Amperes 1N54 THRU 1N548 FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-21AD MECHANICAL DATA * Case: Molded plastic
HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes SYMBOL V RRM V RMS V DC HER201 I O I 2 T C J T J
HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes HER21 THRU HER28 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability * High speed
Comchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
SURFACE MOUNT SUPER FAST RECTIFIER. VOLTAGE RANGE 50 to 400 Volts CURRENT 0.5 Ampere. 300 Maximum RMS Voltage. 210 Maximum DC Blocking Voltage
SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 400 Volts CURRENT 0.5 Ampere 05E1L THRU 05E6L FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast
* Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 R2500F R3000F R4000F R5000F VRRM VRMS VDC IFSM. I 2 t 3.
HIGH VOLTAGE FAST RECOVER RECTIFIER R25F THRU R5F VOLTAGE RANGE 25 to 5 CURRENT.2 Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 MECHANICAL DATA * Case:
HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes I O I 2 T R JC 15 C J Operating Temperature Range T J
HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 5 to CURRENT 2. Amperes HER21 THRU HER28 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability * High speed
MURS220 MURS240 MURS260
ULTRAFAST RECTIFIER VOLTAGE RANGE 2 to 6 CURRENT 2. Amperes MURS22 MURS24 MURS26 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Ultrafast switching speed *
HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Amperes I O I 2 T R θ JL R θ JA C J T J T STG
HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 3. Amperes HER31 THRU HER38 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability *
VOLTAGE RANGE 50 to 600 Volts CURRENT 3.0 Amperes. UNITS Maximum Recurrent Peak Reverse Voltage SYMBOL V RRM V RMS V DC I O I FSM.
GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE to 6 CURRENT 3. Amperes SF3 THRU SF37 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching
SYMBOL V RRM V RMS. Volts Maximum Average Forward Output Current at T A = 40 o C V DC I O I FSM. A 2 S 40 Typical Thermal Resistance (Note 2) TJ,TSTG
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes DB21S THRU DB27S FEATURES * Good for automation insertion * Surge overload rating - 6 amperes peak * Ideal
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes SYMBOL I O I FSM. R θ JC.
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes RS21 THRU RS27 FEATURES * Ideal for printed circuit board * Surge overload rating: 5 amperes peak * Weight:
SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
SUPER LOW Vf SCHOTTKY BARRIER RECTIFIER SYMBOL FML120B V RRM V RMS V DC I O C J T J T STG
SUPER LOW Vf SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 2 to 4 CURRENT 1. Ampere FML12B THRU FML14B FEATURES * Low switching noise * Low forward voltage drop * High current capability * High switching capability
GPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
SURFACE MOUNT SUPER FAST RECTIFIER SYMBOL SE1 SE2 V RRM V RMS V DC I O C J T J T STG
SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 5 to 4 CURRENT. Ampere SE THRU SE6 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching speed
SYMBOL. UNITS Maximum Recurrent Peak Reverse Voltage V RRM V RMS I O I FSM I 2 T. Viso T J, T STG
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to CURRENT 8. Amperes RS8M THRU RS87M FEATURES * Low leakage * Low forward voltage * Surge overload rating : amperes peak * Mounting
HDB208LS. SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE 1000 Volts CURRENT 2.0 Ampere DB-LS FEATURES MECHANICAL DATA
HDB28LS SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE 1 CURRENT 2. Ampere FEATURES * Glass passivated device * Good for automation insertion * Low leakage current * Ideal for
SILICON PLANAR ZENER DIODE. Vrm I FM I O. Maximum Average Forward Rectified Current I FSM I 2 T. Trr C T. pf Maximum Power Dissipation P D T J,T STG
SILICON PLANAR ZENER DIODE FEATURES * Fast Switching Device(T RR
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes V RRM V RMS V DC I O I FSM
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 4. Amperes RS41L THRU RS47L FEATURES * Ideal for printed circuit board * Surge overload rating: 15 amperes peak * Mounting
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
SA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
P4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
BZX84C-BS SERIES 4.7V to 36V
BZX84C-BS SERIES 4.7V to 36V SILICON PLANAR VOLTAGE REGULATOR DIODE FEATURES * Zener Voltage Range 4.7 to 36 Volts * SOT-23 Package * Low Voltage General Purpose Voltage Regulator Diode SOT-23 MECHANICAL
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
SURFACE MOUNT SILICON RECTIFIER. VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere SYMBOL V RRM V RMS V DC I O I R IFSM. I 2 t
SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 5 to 1 Volts CURRENT Ampere SA1 THRU SA7 FEATURES * Ideal for surface mounted applications * Low leakage current *Metallurgically bonded construction *Mounting
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 1000 Volts CURRENT 4.0 Ampere SYMBOL
MSB47S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 1 CURRENT 4. Ampere FEATURES * Good for automation insertion * Ideal for printed circuit board * Reliable low cost construction
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
SE2305. SOT-23 Plastic-Encapsulate MOSFETS WILLAS ELECTRONIC CORP. P-Channel 8-V(D-S) MOSFET. FEATURE TrenchFET Power MOSFET SOT-23
P-Channel 8-V(D-S) MOSFET FEATURE TrenchFET Power MOSFET SOT-23 APPLICATIONS Load Switch for Portable Devices DC/DC Converter 1. GATE 2. SOURCE 3. DRAIN MARKING: S5 Maximum ratings ( unless otherwise noted)
DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
ICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
P6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere SYMBOL V RRM V RMS V DC I O. C/W Typical Thermal Resistance (Note 1) R θ JL C J T J T STG
SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 1. Ampere FM41W THRU FM47W FEATURES * Ideal for surface mounted applications * Low leakage current * Metallurgically bonded construction * Mounting
BZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere VRRM VRMS VDC IFSM I 2 T. (Note 2) R JL (Note 3) R JA TJ, TSTG SYMBOL
SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY SILICON RECTIFIER VOLTAGE RANGE 5 to 1 Volts CURRENT 1. Ampere FFM11 THRU FFM17 FEATURES * Glass passivated device * Ideal for surface mounted applications
SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER SYMBOL
SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 5 to 6 CURRENT 1. Ampere FEATURES * Glass passivated device * Ideal for surface mounted applications * Low leakage current * Metallurgically
RC205 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER. VOLTAGE 600 Volts CURRENT 2.0 Amperes RC-2
RC25 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE 6 CURRENT 2. Amperes FEATURES * Reverse voltage to 6v * Surge overload ratings to 5 amperes peak * Good for printed circuit board assembly
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
VOLTAGE RANGE 50 to 600 Volts CURRENT 10.0 Amperes. UNITS Maximum Recurrent Peak Reverse Voltage V RRM V RMS V DC I O I FSM. I 2 t 93.
GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE 5 to 6 Volts CURRENT 1. Amperes SF11P THRU SF17P FEATURES * Low Profile Design for Smart Phone Charger * Ideal for SMT Mounting * High Forward Surge
SURFACE MOUNT FAST RECOVERY RECTIFIER SYMBOL V RRM V RMS V DC I O I FSM T J, T STG SYMBOL. Maximum Instantaneous Forward Voltage at 1.
SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE 5 to 6 Volts CURRENT.5 Ampere 5F THRU 5F5 FEATURES * Fast switching * Low leakage * Low forward voltage drop * High current capability * High currenf
3000/Tape&Reel. 2 P D Maximum Power Dissipation TA = 75 o C 1.44 T J, T stg Operating Junction and Storage Temperature Range
DS = 30 R DS(ON), gs @10, I ds @8.5A = 38mΩ R DS(ON), gs @4.5, I ds @5A = 52mΩ Features Advanced trench process technology High Density Cell Design For Ultra Low On-Resistance High Power and Current Handling
P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
4 1N4001G-K - 1N4007G-K Taiwan Semiconductor. 1A, 50V V Glass Passivated Rectifier
4 N400 - N4007 A, 50V - 00V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low VF High reliability High surge current capability Low power loss, high efficiency
2A, 800V V Glass Passivated High Efficient Rectifier
2A, 800V - 1000V Glass Passivated High Efficient Rectifier FEATURES Glass passivated chip junction High efficiency, Low V F High current capability High surge current capability Low power loss Compliant
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
High Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
Darlington Amplifier Transistor
We declare that the material of product compliance with RoHS requirements. ORDERING INFORMATION Device Marking Shipping MMBTA13LT1 1M 3000/Tape & Reel MMBTA14LT1 1N 3000/Tape & Reel MAXIMUM RATINGS Rating
4 1N5400G-K - 1N5408G-K Taiwan Semiconductor. 3A, 50V V Glass Passivated Rectifier
4 1N5400-1N5408 3A, 50V - 0V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low V F High reliability High surge current capability Low power loss, high efficiency
UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier
UF400, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier FEATURES Glass passivated chip junction Ultrafast reverse recovery time Low forward voltage drop Low switching losses,
20V P-Channel Enhancement-Mode MOSFET
1 3 FEATURES RDS(ON) 110mΩ@VGS=-4.5V RDS(ON) 150mΩ@VGS=-2.5V Super high density cell design for extremely low RDS(ON) APPLICATIONS Power Management in Note book Portable Equipment Battery Powered System
Glass Passivated Junction Plastic Rectifier
N400GP, N4002GP, N4003GP, N4004GP, N4005GP, N4006GP, N4007GP Glass Passivated Junction Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability application
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
Small Signal MOSFET 115 ma, 60 V
NChannel SOT323 We declare that the material of product compliance with RoHS requirements. ESD Protected:1000V SOT 323 MAXIMUM RATINGS Rating Symbol Value Unit Simplified Schematic DrainSource Voltage
Transient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
SILICON RECTIFIER. VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS VRRM VRMS VDC IFSM
1N4001 THRU 1N4007 SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability MECHANICAL DATA * Case: Molded
BZX55C-BS SERIES 4.7V to 36V
BZX55C-BS SERIES 4.7V to 36V SILICON PLANAR ZENER DIODE FEATURES * Zener Voltage Range 4.7 to 36 Volts * DO-35 Glass Axial Package * Best Suited For Industrial, Military and Space Applications. * The Glass
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
China - Germany - Korea - Singapore - United States - smc-diodes.com
Technical Data Features: Glass Passivated Die Construction 5000W Peak Pulse Power Dissipation Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material
0.8A, 600V V Glass Passivated Bridge Rectifier
MBS6-K - MBS-K 0.8A, 600V - 00V Glass Passivated Bridge Rectifier FEATURES Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge current capability
VOLTAGE RANGE 50 to 600 Volts CURRENT 16 Amperes VRRM VRMS VDC IFSM. I 2 t A 2 /Sec. RθJC TJ, TSTG SYMBOL V F. trr
GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE to 6 CURRENT 16 Amperes THRU FEATURES * Low switching noise * Low forward voltage drop * Low thermal resistance * High current capability * Super fast
2A, 50V - 600V Glass Passivated Super Fast Rectifier
SF21 - SF28 2A, 50V - 600V Glass Passivated Super Fast Rectifier FEATURES Glass passivated chip junction High efficiency, Low V F High current capability High surge current capability Low power loss Compliant
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
2A, 1000V Glass Passivated Bridge Rectifier
2A, 000V Glass Passivated Bridge Rectifier FEATURES Glass passivated junction Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge current capability
P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
BZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
Schottky Barrier Rectifiers
Schottky Barrier Rectifiers FEATURES Guardring for overvoltage protection Very small conduction losses Extremely fast switching Low forward voltage drop DO-204AL (DO-4) High frequency operation Solder
High Voltage Glass Passivated Junction Plastic Rectifier
High Voltage Glass Passivated Junction Plastic Rectifier SUPERECTIFIER FEATURES Superectifier structure for high reliability application Cavity-free glass-passivated junction Low leakage current High forward
Glass Passivated Ultrafast Plastic Rectifier
Glass Passivated Ultrafast Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability condition Cavity-free glass-passivated junction Ideal for printed circuit
High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to
MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
SMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
1A, 50V V Glass Passivated Rectifier
A, 50-000 Glass Passivated Rectifier FEATURES Glass passivated chip junction Excellent high temperature switching High efficiency, low F Ultrafast recovery time for high efficiency Compliant to RoHS Directive
High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-28AB PRIMARY CHARACTERISTICS V BR 27 V P PPM ( x μs) 36 W P D 5 W V WM 22 V I RSM 7 A I FSM
Green. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
Photovoltaic Solar Cell Protection Schottky Rectifier
Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low V F = 0.30 V at I F = 5.0 A FEATURES TMBS Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency operation
SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features SMA Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions
General Purpose Transistor
NPN Silicon RoHS product for packing code suffix "G", Halogen free product for packing code suffix "H". MAXIMUM RATINGS Rating Symbol 2222 2222A Unit Collector Emitter Voltage O 3 4 Vdc SOT 23 Collector
VOLTAGE RANGE 200 Volts CURRENT 8.0 Amperes C J. C Storage Temperature Range
SR82P SHOTTKY BARRIER RETIFIER VOLTAGE RANGE 2 Volts URRENT 8. Amperes FEATURES * Low switching noise * Low forward voltage drop * Low thermal resistance * High current capability * High surge capabitity
Photovoltaic Solar Cell Protection Schottky Rectifier
VSB545-M3 Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low V F =.33 V at I F = 5. A TMBS FEATURES Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency
High Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR
P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
Dual Common-Cathode Ultrafast Soft Recovery Rectifier
UG(F,B)FCT & UG(F,B)GCT, BYT8(F,B)-300 & BYT8(F,B)-400 Dual Common-Cathode Ultrafast Soft Recovery Rectifier TO-0AB 3 BYT8, UG Series PIN PIN PIN 3 CASE TO-63AB ITO-0AB 3 BYT8F, UGF Series PIN PIN PIN
MUN52xxDWT DEVICE MARKING, RESISTOR VALUES AND ORDERING INFORMATION Device Marking R(K) R2(K) Shipping MUN52DWT SOT-363 7A /Tape&Reel MUN522DW
MUN52xxDWT NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors;
500mW High Speed SMD Switching Diode
5mW High Speed SMD Switching Diode FEATURES - Designed for mounting on small surface - Extremely thin/leadless package - High mounting capability, strong surage with stand, high reliability - Pb free and
Fast Switching Plastic Rectifier
Fast Switching Plastic Rectifier TO-0AC ITO-0AC FEATURES Glass passivated chip junction Superfast recovery time for high efficiency Low leakage current High forward surge capability BY9 Series CASE TO-63AB
1A, 400V ESD Capability Rectifier
A, 400V ESD Capability Rectifier FEATURES High ESD capability Glass passivated chip junction Ideal for automated placement Low forward voltage drop High surge current capability Compliant to RoHS Directive
Surface Mount Transient Voltage Suppressors
TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems.
6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
Surface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.0 A V RRM 200 V I FSM 40 A t rr 25 ns V F 0.71 V T J max. 175 C Package Diode variations Single die FEATURES Glass passivated
Unidirectional*
Unidirectional* Mosorb devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener