200W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR. SMF Series WILLAS ELECTRONIC CORP.
|
|
- Alexia Snow
- 5 years ago
- Views:
Transcription
1 Working : 5.0 to 190 V Peak Pulse Power: 200 W Features Glass passivated chip 200 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time RoHS compliant Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end except Bipolar Mounting position: Any.119(3.00).099(2.51).153(3.90).137(3.50) SOD-123S.079(2.00).054(1.38).009(0.22).004(0.10) Dimensions in inches and (millimeters).053(1.35).029(0.75).052(1.33).032(0.81) Maximum Ratings(T A =25 unless otherwise noted) Parameter Symbol Value UNIT Peak power dissipation with a 10/1000s waveform (1) P PP 200 W Peak power dissipation with a 8/20s waveform (1) P PP 1000 W Peak pulse current wih a 10/1000s waveform (1) I PP See Next Table A Power dissipation on infinite heatsink at T L = 75 C P D 0.4 W Peak forward surge current, 8.3 ms single half sinewave unidirectional only (2) I FSM 20 A Maximum instantaneous forward voltage at 25 A for unidirectional only V F 3.5 V Operating junction and storage temperature range T J, T STG 55 to +150 C Note: (1)Non-repetitive current pulse per Fig.5 and derated above T A = 25 C per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum WILLAS ELECTRONIC CORP.
2 WILLAS ELECTRONIC CORP.
3 Part No. Marking Code UNI-POLAR BI-POLAR UNI-POLAR BI-POLAR Stand- Off V RWM (V) I T I T Test I T (ma) Max Clamping V C I PP Peak Pulse I PP (A) Leakage I R V RWM SMF5.0A SMF5.0CA FE KE SMF6.0A SMF6.0CA FG KG SMF6.5A SMF6.5CA FK KK SMF7.0A SMF7.0CA FM KM SMF7.5A SMF7.5CA FP KP SMF8.0A SMF8.0CA FR KR SMF8.5A SMF8.5CA FT KT SMF9.0A SMF9.0CA FV KV SMF10A SMF10CA FX KX SMF11A SMF11CA FZ KZ SMF12A SMF12CA HE LE SMF13A SMF13CA HG LG SMF14A SMF14CA HK LK SMF15A SMF15CA HM LM SMF16A SMF16CA HP LP SMF17A SMF17CA HR LR SMF18A SMF18CA HT LT SMF19A SMF19CA HB LB SMF20A SMF20CA HV LV SMF22A SMF22CA HX LX SMF24A SMF24CA HZ LZ SMF26A SMF26CA JE ME SMF28A SMF28CA JG MG SMF30A SMF30CA JK MK SMF33A SMF33CA JM MM SMF36A SMF36CA JP MP SMF40A SMF40CA JR MR SMF43A SMF43CA JT MT SMF45A SMF45CA JV MV SMF48A SMF48CA JX MX SMF51A SMF51CA JZ MZ SMF54A SMF54CA XE NE SMF58A SMF58CA XG NG SMF60A SMF60CA XK NK SMF64A SMF64CA XM NM SMF70A SMF70CA XP NP SMF75A SMF75CA XR NR SMF78A SMF78CA XT NT SMF80A SMF80CA XB NB WILLAS ELECTRONIC CORP.
4 UNI-POLAR BI-POLAR UNI-POLAR BI-POLAR SMF85A SMF85CA XV NV SMF90A SMF90CA XX NX SMF100A SMF100CA XZ NZ SMF110A SMF110CA TE PE SMF120A SMF120CA TG PG SMF130A SMF130CA TK PK SMF140A SMF140CA TB PB SMF150A SMF150CA TM PM SMF160A SMF160CA TP PP SMF170A SMF170CA TR PR SMF180A SMF180CA TT PT SMF190A SMF190CA TV PV Note: Part No. Marking Code Stand- Off V RWM (V) 1. Add suffix "CA" after Part number to specify Bi-directional devices. I T 2. For Bi-directional devices having VRWM of 10 voltages and under, the IR limit is doubled. I T Test I T (ma) Max Clamping V C I PP Peak Pulse I PP (A) Leakage I R V RWM WILLAS ELECTRONIC CORP.
5 Ordering Information: Device PN Packing Part Number -T (1) G (2) -WS Tape & Reel Packing :3000pcs/Reel Note: 1. Packing code, T: Tape & 7 Reel Packing; 2. RoHS product for packing code suffix G, Halogen free product for packing code suffix "H". ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures WILLAS ELECTRONIC CORP.
Transient Voltage Suppression Diodes: SMF Series SMD Type 200 W
Features 1. Low profile and space saving 2. For surface mounted applications 3. RoHS compliant 4. Reliable low cost construction utilizing molded plastic technique 5. Glass passivated chip 6. Both bi-directional
More information600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB(DO-214AA) PACKAGE. SMBJ Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 440 V Peak Pulae Power: 600 W SMB (DO-214AA) Features Glass passivated chip 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationSMF SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A=25 C unless otherwise specified WTE
WTE POWER SEMICONDUCTORS SMF SERIES 200W SURFACE MOUNT TRANSIENT SUPPRESSOR Pb Features Glass Passivated Die Construction 200W Peak Pulse Power Dissipation A 5.0V 90V Standoff Voltage Uni- and Bi-Directional
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationTV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationSA Series. Working Voltage: 5.0 to 190 V Peak Pulae Power: 500 W 500W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DO-15 PACKAGE
Working : 5.0 to 190 V Peak Pulae Power: 500 W Features Glass passivated chip 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationSMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD-123 Flat Lead Package
Zener Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. SMBJ5.(C)A - SMBJ17(C)A 6W SURFACE MOUNT TRANSIENT OLTAGE SUPPRESSOR Features
More informationSMBJ5.0 THRU SMBJ440CA
SMBJ5.0 THRU SMBJ440CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off : 5.0-440 Volts Peak pulse power: 600 Watts 0.087 (2.20) 0.071 (1.80) 0.096(2.44) 0.084(2.13) SMB/DO-214AA 0.180(4.57) 0.160(4.06)
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More informationSMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD 123 Flat Lead Package
Zener Transient Voltage Suppressor SOD 123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,
More informationSZ1SMB Series. TVS Diodes. Surface Mount > 600W > SZ1SMB Series. Description
SZ1SMB Series Pb Description The SZ1SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More information1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent
More information1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
1SMBAT3 Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Transient Suppressors Features Glass passivated junction. 600W Peak Pulse
More information5 to 70 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space AEC-Q101 qualified
More informationSuface Mount Transient Voltage Suppressor
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from
More informationGreen. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMF5.0AT1G Series, SZSMF5.0AT1G Series. 200 W Transient Voltage Suppressor SOD-123 Flat Lead Package
SMF5.AT1G Series, SZSMF5.AT1G Series 2 W Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.AT1G Series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationSMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationPeak Pulse Power Dissipation on 10/1000us waveform (Note1,Note2, Fig.1). PPPM Minimum 600 Watts
TRANSIENT VOLTAGE SUPPRESSORS TM DESCRIPTION The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationCD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationTransient Voltage Suppressors. SMBJ Series. Circuit Protection System
Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated
More informationSURFACE MOUNT SUPER FAST RECTIFIER. VOLTAGE RANGE 50 to 400 Volts CURRENT 0.5 Ampere. 300 Maximum RMS Voltage. 210 Maximum DC Blocking Voltage
SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 400 Volts CURRENT 0.5 Ampere 05E1L THRU 05E6L FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast
More informationSILICON RECTIFIER SYMBOL. UNITS Maximum Recurrent Peak Reverse Voltage V RRM V RMS V DC I O I FSM I 2 T C J
SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 3. Amperes 1N54 THRU 1N548 FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-21AD MECHANICAL DATA * Case: Molded plastic
More informationSZSMF5.0AT1G Series. TVS Diodes. Surface Mount > 200W > SZSMF5.0AT1G Series. Bi-directional. Cathode. Anode. Uni-directional.
Surface Mount > 2W > SZSMF5.ATG Series SZSMF5.ATG Series Pb Description The SZSMF5.ATG Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series
Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series
Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationHIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes SYMBOL V RRM V RMS V DC HER201 I O I 2 T C J T J
HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes HER21 THRU HER28 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability * High speed
More informationParameter Symbol Value Unit
*RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More information* Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 R2500F R3000F R4000F R5000F VRRM VRMS VDC IFSM. I 2 t 3.
HIGH VOLTAGE FAST RECOVER RECTIFIER R25F THRU R5F VOLTAGE RANGE 25 to 5 CURRENT.2 Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 MECHANICAL DATA * Case:
More informationMURS220 MURS240 MURS260
ULTRAFAST RECTIFIER VOLTAGE RANGE 2 to 6 CURRENT 2. Amperes MURS22 MURS24 MURS26 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Ultrafast switching speed *
More informationHIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes I O I 2 T R JC 15 C J Operating Temperature Range T J
HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 5 to CURRENT 2. Amperes HER21 THRU HER28 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability * High speed
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationHIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Amperes I O I 2 T R θ JL R θ JA C J T J T STG
HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 3. Amperes HER31 THRU HER38 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability *
More informationS M A J x x x C A. Reverse Stand-Off Voltage
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Fast response time
More informationSYMBOL V RRM V RMS. Volts Maximum Average Forward Output Current at T A = 40 o C V DC I O I FSM. A 2 S 40 Typical Thermal Resistance (Note 2) TJ,TSTG
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes DB21S THRU DB27S FEATURES * Good for automation insertion * Surge overload rating - 6 amperes peak * Ideal
More informationSURFACE MOUNT SUPER FAST RECTIFIER SYMBOL SE1 SE2 V RRM V RMS V DC I O C J T J T STG
SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 5 to 4 CURRENT. Ampere SE THRU SE6 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching speed
More informationVOLTAGE RANGE 50 to 600 Volts CURRENT 3.0 Amperes. UNITS Maximum Recurrent Peak Reverse Voltage SYMBOL V RRM V RMS V DC I O I FSM.
GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE to 6 CURRENT 3. Amperes SF3 THRU SF37 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching
More informationSUPER LOW Vf SCHOTTKY BARRIER RECTIFIER SYMBOL FML120B V RRM V RMS V DC I O C J T J T STG
SUPER LOW Vf SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 2 to 4 CURRENT 1. Ampere FML12B THRU FML14B FEATURES * Low switching noise * Low forward voltage drop * High current capability * High switching capability
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
More informationSINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes SYMBOL I O I FSM. R θ JC.
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes RS21 THRU RS27 FEATURES * Ideal for printed circuit board * Surge overload rating: 5 amperes peak * Weight:
More informationBZX84C-BS SERIES 4.7V to 36V
BZX84C-BS SERIES 4.7V to 36V SILICON PLANAR VOLTAGE REGULATOR DIODE FEATURES * Zener Voltage Range 4.7 to 36 Volts * SOT-23 Package * Low Voltage General Purpose Voltage Regulator Diode SOT-23 MECHANICAL
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationGLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
More informationSURFACE MOUNT SILICON RECTIFIER. VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere SYMBOL V RRM V RMS V DC I O I R IFSM. I 2 t
SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 5 to 1 Volts CURRENT Ampere SA1 THRU SA7 FEATURES * Ideal for surface mounted applications * Low leakage current *Metallurgically bonded construction *Mounting
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationHDB208LS. SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE 1000 Volts CURRENT 2.0 Ampere DB-LS FEATURES MECHANICAL DATA
HDB28LS SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE 1 CURRENT 2. Ampere FEATURES * Glass passivated device * Good for automation insertion * Low leakage current * Ideal for
More informationSurface Mount ESD Protection Diodes
Surface Mount ESD Protection Diodes 1 2 MARKING (example only) 20278 17249 XX YY Bar = cathode marking YY = type code (see table below) XX = date code 22623 DESIGN SUPPORT TOOLS click logo to get started
More informationSINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes V RRM V RMS V DC I O I FSM
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 4. Amperes RS41L THRU RS47L FEATURES * Ideal for printed circuit board * Surge overload rating: 15 amperes peak * Mounting
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationDarlington Amplifier Transistor
We declare that the material of product compliance with RoHS requirements. ORDERING INFORMATION Device Marking Shipping MMBTA13LT1 1M 3000/Tape & Reel MMBTA14LT1 1N 3000/Tape & Reel MAXIMUM RATINGS Rating
More informationSMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
More informationSYMBOL. UNITS Maximum Recurrent Peak Reverse Voltage V RRM V RMS I O I FSM I 2 T. Viso T J, T STG
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to CURRENT 8. Amperes RS8M THRU RS87M FEATURES * Low leakage * Low forward voltage * Surge overload rating : amperes peak * Mounting
More informationSURFACE MOUNT FAST RECOVERY RECTIFIER SYMBOL V RRM V RMS V DC I O I FSM T J, T STG SYMBOL. Maximum Instantaneous Forward Voltage at 1.
SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE 5 to 6 Volts CURRENT.5 Ampere 5F THRU 5F5 FEATURES * Fast switching * Low leakage * Low forward voltage drop * High current capability * High currenf
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationSINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 1000 Volts CURRENT 4.0 Ampere SYMBOL
MSB47S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 1 CURRENT 4. Ampere FEATURES * Good for automation insertion * Ideal for printed circuit board * Reliable low cost construction
More informationSILICON PLANAR ZENER DIODE. Vrm I FM I O. Maximum Average Forward Rectified Current I FSM I 2 T. Trr C T. pf Maximum Power Dissipation P D T J,T STG
SILICON PLANAR ZENER DIODE FEATURES * Fast Switching Device(T RR
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER SYMBOL
SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 5 to 6 CURRENT 1. Ampere FEATURES * Glass passivated device * Ideal for surface mounted applications * Low leakage current * Metallurgically
More information4 1N4001G-K - 1N4007G-K Taiwan Semiconductor. 1A, 50V V Glass Passivated Rectifier
4 N400 - N4007 A, 50V - 00V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low VF High reliability High surge current capability Low power loss, high efficiency
More informationSurface Mount > 200W > SMF5.0AT1G Series. Description. Features
SMF.TG Series Pb OBSOLETE/EOL Description DTE June/3/8 PCN/ECN# LFPCN446 REPLCED BY SMF Series The SMF.TG Series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationTransient Voltage Suppressors. SMAJ Series. Circuit Protection System
Transient Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA above 10V Compatible
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationVOLTAGE RANGE 50 to 600 Volts CURRENT 10.0 Amperes. UNITS Maximum Recurrent Peak Reverse Voltage V RRM V RMS V DC I O I FSM. I 2 t 93.
GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE 5 to 6 Volts CURRENT 1. Amperes SF11P THRU SF17P FEATURES * Low Profile Design for Smart Phone Charger * Ideal for SMT Mounting * High Forward Surge
More informationVOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere SYMBOL V RRM V RMS V DC I O. C/W Typical Thermal Resistance (Note 1) R θ JL C J T J T STG
SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 1. Ampere FM41W THRU FM47W FEATURES * Ideal for surface mounted applications * Low leakage current * Metallurgically bonded construction * Mounting
More informationSMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSE2305. SOT-23 Plastic-Encapsulate MOSFETS WILLAS ELECTRONIC CORP. P-Channel 8-V(D-S) MOSFET. FEATURE TrenchFET Power MOSFET SOT-23
P-Channel 8-V(D-S) MOSFET FEATURE TrenchFET Power MOSFET SOT-23 APPLICATIONS Load Switch for Portable Devices DC/DC Converter 1. GATE 2. SOURCE 3. DRAIN MARKING: S5 Maximum ratings ( unless otherwise noted)
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationRC205 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER. VOLTAGE 600 Volts CURRENT 2.0 Amperes RC-2
RC25 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE 6 CURRENT 2. Amperes FEATURES * Reverse voltage to 6v * Surge overload ratings to 5 amperes peak * Good for printed circuit board assembly
More informationTV04A5V0-HF Thru. TV04A441-HF
TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive
More informationSOD123. Top View. M5X = Product Type Marking Code YM = Date Code Marking Y = Year (ex.: E = 2017) M = Month (ex: 9 = September)
0.5A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Product Summary V F(MAX) (V) I R(MAX) (µa) V RRM (V) I O (A) @ +25 C @ +25 C 80 0.5 0.80 5 Description and Applications This is a single rectifier packaged
More information4 1N5400G-K - 1N5408G-K Taiwan Semiconductor. 3A, 50V V Glass Passivated Rectifier
4 1N5400-1N5408 3A, 50V - 0V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low V F High reliability High surge current capability Low power loss, high efficiency
More informationVOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere VRRM VRMS VDC IFSM I 2 T. (Note 2) R JL (Note 3) R JA TJ, TSTG SYMBOL
SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY SILICON RECTIFIER VOLTAGE RANGE 5 to 1 Volts CURRENT 1. Ampere FFM11 THRU FFM17 FEATURES * Glass passivated device * Ideal for surface mounted applications
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More information