Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series
|
|
- Clarissa Bradford
- 6 years ago
- Views:
Transcription
1 Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals AGENCY Ratings and Thermal Characteristics ( =5 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation at =5ºC by xµs waveform (Fig.(Note, (Note P PPM 6 W Power Dissipation on infinite heat sink at =5 O C Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3 Instantaneous Forward Voltage at 5A for Unidirectional only (Note 4 Operating Junction and Storage Temperature Range Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient AGENCY FILE NUMBER E866/E353 P M(AV 5. W I FSM A V F 3.5V/5. V T J, T STG -65 to 5 C R ujl C/W R uja C/W Halogen-Free RoHS compliant For surface mounted applications to optimize board space Low profile package Built-in strain relief Typical maximum temperature coefficient ΔV BR =.% x V C x ΔT Glass passivated chip junction 6W peak pulse power capability at μs waveform, repetition rate (duty cycles:.% Applications Fast response time: typically less than.ps from V to BV min Excellent clamping capability Low incremental surge resistance Typical I R less than µa above V High Temperature soldering guaranteed: 6 C/4 seconds at terminals Plastic package has Underwriters Laboratory Flammability 94V-O Matte Tin Lead free Plated TVS devices are ideal for the protection of I/O Interfaces, V CC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Notes:. Non-repetitive current pulse, per Fig. 3 and derated above = 5 O C per Fig... Mounted on copper pad area of.x. (5. x 5.mm to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. 4. V F <3.5V for V BR _< V and V F <5.V for V BR _> V. 4
2 Surface Mount 6W > SMBJ series Electrical Characteristics Part Number (Uni Part Number (Bi Marking Reverse Stand off Voltage V R (Volts For bidirectional type having V R of volts and less, the I R limit is double. For parts without A, the V BR is ± % and Vc is 5% higher than with A parts. Breakdown Voltage V BR I T UNI BI MIN MAX Test Current I T (ma Clamping Voltage V I pp (V Peak Pulse Current I pp (A Reverse Leakage I V R (µa SMBJ5.A SMBJ5.CA KE AE X SMBJ6.A SMBJ6.CA KG AG X SMBJ6.5A SMBJ6.5CA KK AK X SMBJ7.A SMBJ7.CA KM AM X SMBJ7.5A SMBJ7.5CA KP AP X SMBJ8.A SMBJ8.CA KR AR X SMBJ8.5A SMBJ8.5CA KT X SMBJ9.A SMBJ9.CA KV AV X SMBJA SMBJCA KX AX X SMBJA SMBJCA KZ AZ X SMBJA SMBJCA LE BE X SMBJ3A SMBJ3CA LG BG X SMBJ4A SMBJ4CA LK BK X SMBJ5A SMBJ5CA LM BM X SMBJ6A SMBJ6CA LP BP X SMBJ7A SMBJ7CA LR BR X SMBJ8A SMBJ8CA LT BT X SMBJA SMBJCA LV BV X SMBJA SMBJCA LX BX X SMBJ4A SMBJ4CA LZ BZ X SMBJ6A SMBJ6CA ME CE X SMBJ8A SMBJ8CA MG CG X SMBJ3A SMBJ3CA MK CK X SMBJ33A SMBJ33CA MM CM X SMBJ36A SMBJ36CA MP CP X SMBJ4A SMBJ4CA MR CR X SMBJ43A SMBJ43CA MT CT X SMBJ45A SMBJ45CA MV CV X SMBJ48A SMBJ48CA MX CX X SMBJ5A SMBJ5CA MZ CZ X SMBJ54A SMBJ54CA NE DE X SMBJ58A SMBJ58CA NG DG X SMBJ6A SMBJ6CA NK DK X SMBJ64A SMBJ64CA NM DM X SMBJ7A SMBJ7CA NP DP X SMBJ75A SMBJ75CA NR DR X SMBJ78A SMBJ78CA NT DT X SMBJ85A SMBJ85CA NV DV X SMBJ9A SMBJ9CA NX DX X SMBJA SMBJCA NZ DZ X SMBJA SMBJCA PE EE X SMBJA SMBJCA PG EG X SMBJ3A SMBJ3CA PK EK X SMBJ5A SMBJ5CA PM EM X SMBJ6A SMBJ6CA PP EP X SMBJ7A SMBJ7CA PR ER X SMBJ8A SMBJ8CA PT ET SMBJA SMBJCA PV EV SMBJA SMBJCA PX EX SMBJ5A SMBJ5CA PZ EZ SMBJ3A SMBJ3CA QE FE SMBJ35A SMBJ35CA QG FG SMBJ4A SMBJ4CA QK FK SMBJ44A SMBJ44CA QM FM Agency Approval 5
3 Surface Mount 6W > SMBJ series Ratings and Characteristic Curves ( =5 C unless otherwise noted Figure - Peak Pulse Power Rating Figure - Pulse Derating Curve P PPM -Peak Pulse Power (kw.x." (5.x5.mm Copper Pad Area..... Peak Pulse Power (P PP or Current (I PP Derating in Percentage % t d -Pulse Width (sec. - Ambient Temperature (ºC Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance I PPM - Peak Pulse Current, % I RSM 5 5 td tr=µsec Peak Value IPPM Half Value IPPM IPPM ( TJ=5 C Pulse Width(td is defined as the point where the peak current decays to 5% of IPPM /µsec. Waveform as defined by R.E.A t-time (ms Cj (pf R Bi-directional V=V R Uni-directional V=V Tj=5C f=.mhz Vsig=5mVp-p.... V BR - Reverse Breakdown Voltage (V Figure 5 - Steady State Power Dissipation Derating Curve Figure 6 - Non-Repetitive Peak Forward Surge Current Uni-Directional Only P M(AV, Steady State Power Dissipation (W Ambient Temperature (ºC I FSM - Peak Forward Surge Current (A Number of Cycles at 6 Hz 3 3 6
4 Temperature (T Transient Voltage Suppression Diodes Surface Mount 6W > SMBJ series Soldering Parameters Reflow Condition Lead free assembly t p Pre Heat - Temperature Min (T s(min 5 C - Temperature Max (T s(max C T P T L Ramp-up t L Critical Zone T L to T P - Time (min to max (t s 6 8 secs T s(max Average ramp up rate (Liquidus Temp (T L to peak T S(max to T L - Ramp-up Rate 3 C/second max 3 C/second max T s(min t s Preheat Ramp-down Reflow - Temperature (T L (Liquidus 7 C - Time (min to max (t s 6 5 seconds 5 C t 5 C to Peak Time (t Peak Temperature (T P 6 +/-5 C Time within 5 C of actual peak Temperature (t p 4 seconds Ramp-down Rate 6 C/second max Time 5 C to peak Temperature (T P 8 minutes Max. Do not exceed 8 C Physical Specifications Environmental Specifications Weight.3 ounce,.93 grams Temperature Cycle JESD-A4 Case JEDEC DO4AA. Molded plastic body over glass passivated junction Pressure Cooker JESD-A Polarity Color band denotes cathode except Bidirectional High Temp. Storage JESD-A3 Terminal Matte Tin-plated leads, Solderable per JESD-BD HTRB JESD-A8 Thermal Shock JESD-A6 Dimensions DO-4AA (SMB J-Bend Cathode Band Dimensions Inches Millimeters Min Max Min Max A A C B C B D E D H F G H E F G I J J K L K L I Solder Pads 4 7
5 Surface Mount 6W > SMBJ series Part Numbering System Part Marking System SMBJ XXX C A 5% VOLTAGE TOLERANCE BI-DIRECTIONAL Cathode Band XXXXX XX F SERIES VOLTAGE Littelfuse Logo Marking Code Trace Code Marking Part number Component Package Quantity Option Specification SMBJxxxXX DO-4AA 3 Tape & Reel mm/3 tape EIA STD RS-48 Tape and Reel Specification.57 (4..47 (. Cathode.35 (8..59 DIA (.5 Cover tape.8 (. Arbor Hole Dia. 3. (33 Dimensions are in inches (and millimeters..49 (.5 Direction of Feed 5 8
Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series
Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationSMBJ5.0 THRU SMBJ440CA
SMBJ5.0 THRU SMBJ440CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off : 5.0-440 Volts Peak pulse power: 600 Watts 0.087 (2.20) 0.071 (1.80) 0.096(2.44) 0.084(2.13) SMB/DO-214AA 0.180(4.57) 0.160(4.06)
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationTransient Voltage Suppressors. SMBJ Series. Circuit Protection System
Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppressors Diodes
Transient Voltage Suppressors Diodes Surface Mount - 6W > SMBJ5.~44CA Series The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB(DO-214AA) PACKAGE. SMBJ Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 440 V Peak Pulae Power: 600 W SMB (DO-214AA) Features Glass passivated chip 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. SMBJ5.(C)A - SMBJ17(C)A 6W SURFACE MOUNT TRANSIENT OLTAGE SUPPRESSOR Features
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationPeak Pulse Power Dissipation on 10/1000us waveform (Note1,Note2, Fig.1). PPPM Minimum 600 Watts
TRANSIENT VOLTAGE SUPPRESSORS TM DESCRIPTION The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More information1KSMB Series. Transient Voltage Suppression Diodes. Surface Mount 1000W > 1KSMB series. Uni-directional. Description
Surface Mount W > KSMB series KSMB Series RoHS Pb e3 Uni-directional Description Bi-directional The KSMB series is designed specifically to protect sensitive electronic equipment from voltage transients
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTransient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series
Surface Mount 4W > SMAJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More information5.0SMDJxxS Series, Single Chip Design
5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationTransient Voltage Suppression Diodes: SMF Series SMD Type 200 W
Features 1. Low profile and space saving 2. For surface mounted applications 3. RoHS compliant 4. Reliable low cost construction utilizing molded plastic technique 5. Glass passivated chip 6. Both bi-directional
More information5 to 70 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space AEC-Q101 qualified
More informationSuface Mount Transient Voltage Suppressor
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationTV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More information200W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR. SMF Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 190 V Peak Pulse Power: 200 W Features Glass passivated chip 200 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
More informationSurface Mount ESD Protection Diodes
Surface Mount ESD Protection Diodes 1 2 MARKING (example only) 20278 17249 XX YY Bar = cathode marking YY = type code (see table below) XX = date code 22623 DESIGN SUPPORT TOOLS click logo to get started
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationSMBJ-HRA Series. Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HRA Series. Description. Uni-directional
SMBJ-HRA Series RoHS Pb e3 Uni-directional Bi-directional Description The SMBJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability
More informationSZ1SMB Series. TVS Diodes. Surface Mount > 600W > SZ1SMB Series. Description
SZ1SMB Series Pb Description The SZ1SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationSMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Transient Suppressors Features Glass passivated junction. 600W Peak Pulse
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability
More informationSMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD-123 Flat Lead Package
Zener Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,
More informationTPSMD Series. TVS Diodes Surface Mount 3000W > TPSMD series. Description
TPSMD Series RoHS Pb e3 Description Bi-directional The TPSMD series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationSMF SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A=25 C unless otherwise specified WTE
WTE POWER SEMICONDUCTORS SMF SERIES 200W SURFACE MOUNT TRANSIENT SUPPRESSOR Pb Features Glass Passivated Die Construction 200W Peak Pulse Power Dissipation A 5.0V 90V Standoff Voltage Uni- and Bi-Directional
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationM C C SMBJ11AHE3 THRU SMBJ78CAHE3. Features. Transient Voltage Suppressor 11 to 78 Volts 600 Watt
omponents 2736 Marilla Street Chatsworth!"# $%!"# SMBJAHE3 THU SMBJ78CAHE3 Features For surface mount applicationsin order to optimize board space Lead Free Finish/ohs Compliant (Note) ("P"Suffix designates
More informationTPSMC-VR Series. TVS Diodes Surface Mount 1500W > TPSMC-VR series Series. Description. Uni-directional. Bi-directional
TPSMC-VR Series Description RoHS Pb e3 The TPSMC-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSurface Mount Transient Voltage Suppressor Stand-Off Voltage to 180 Volts 200 Watt Peak Pulse Power
Features Surface Mount Transient Suppressor Stand-Off - 5.0 to 80 olts 0 Watt Peak Pulse Power For surface mounted applications in order to optimize board space Low profile package Built-in strain relief
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationTransient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR series. Bi-directional. Features V BR 3000 W 6.5 W 300 A 3.5 V.
RoHS Uni-directional Description Bi-directional The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationSMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD 123 Flat Lead Package
Zener Transient Voltage Suppressor SOD 123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More informationTransient Voltage Suppression Diodes: SMAJ Series SMD Type 400 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationCD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
More informationNew Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSZSMF5.0AT1G Series. TVS Diodes. Surface Mount > 200W > SZSMF5.0AT1G Series. Bi-directional. Cathode. Anode. Uni-directional.
Surface Mount > 2W > SZSMF5.ATG Series SZSMF5.ATG Series Pb Description The SZSMF5.ATG Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping
More informationZetron Research. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. SMCJ Series. SMCJ Series
RoHS Agency Approvals AGENCY Parameter Symbol Value Unit Peak Pulse Power Dissipation at T A =25ºC by xμs waveform (Fig.)(Note ), (Note 2) P PPM 5 W Power Dissipation on infinite heat sink at T A =5 O
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationDIODE Transient Voltage Suppression (TVS) Diode Products
PRODUCT CATALOG & DESIGN GUIDE DIODE Transient Voltage Suppression (TVS) Diode Products Littelfuse Circuit Prot Solutions Portf DESIGN SUPPORT Consumer Electronics Telecom White Goods Medical Equipment
More informationSMDJ-HR Series. Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR Series. Description. Uni-directional
SMDJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.
Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent
More informationSMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band.
SMA/DO-214AC Features: For surface mounted application. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time : typically less than 1.0ps
More informationTransient Voltage Suppression Diodes: SMAF Series SMD Low Profile Type 400 W
Features 1. Low profile and space saving 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationSMBJ SERIES RTCA DO-160G COMPLIANT PRODUCT 600 WATT TVS COMPONENT APPLICATIONS DO-214AA PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS
600 WATT TVS COMPONENT APPLICATIONS Power Supply AC/DC Applications Telecom DO-214AA PACKAGE FEATURES UL File Recognition #E208219 Compatible with IEC 61000-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible
More information1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More information1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
1SMBAT3 Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationSMAJ5.0~440(C)A MAXIMUM RATINGS AND CHARACTERISTICS THERMAL CONSIDERATIONS. Transient Voltage Suppressors DO-214AC(SMA) PACKAGE SCHEMATIC SYMBOL
Transient Suppressors DESCRIPTION The SMAJ series is designed specifically to protect sensi ve electronic equipment from voltage transients induced by lightning and other transient voltage events. FEATURES
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationTransient Voltage Suppressors. SMAJ Series. Circuit Protection System
Transient Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA above 10V Compatible
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More information