600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB(DO-214AA) PACKAGE. SMBJ Series WILLAS ELECTRONIC CORP.
|
|
- Candice Gregory
- 5 years ago
- Views:
Transcription
1 Working : 5.0 to 440 V Peak Pulae Power: 600 W SMB (DO-214AA) Features Glass passivated chip 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time.086(2.20).075(1.91).191(4.85).160(4.06).115(3.94).130(3.30) Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end except Bipolar Mounting position: Any.096(2.44).083(2.13).060(1.52).029(0.75).220(5.59).012(0.30).006(0.15).008(2.03).001(0.02).199(5.05) Dimensions in inches and (millimeters) Maximum Ratings(TA=25 unless otherwise noted) Parameter Peak power dissipation with a 10/1000μs waveform Peak pulse current wih a 10/1000μs waveform(1) Power dissipation on infinite heatsink at T L = 75 C Peak forward surge current, 8.3 ms single half sinewave unidirectional only (2) Maximum instantaneous forward voltage at 50 A for unidirectional only (3) Operating junction and storage temperature range Symbol P PP Value 600 See Next Table to +150 Note: (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 per Fig.1 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. (3)VF<3.5V for devices Of VBR<200V and VF<5.0V for devices of VBR>201V (1) I PP P D I FSM V F T J, T STG /5.0 UNIT W A W A V C
2
3 Part No. Marking Code UNI-POLAR BI-POLAR UNI-POLAR BI-POLAR Stand- Off V RWM (V) I T I T Test I T (ma) Max Clamping V C I PP Peak Pulse I PP (A) Leakage I R V RWM SMBJ5.0A SMBJ5.0CA KE AE SMBJ6.0A SMBJ6.0CA KG AG SMBJ6.5A SMBJ6.5CA KK AK SMBJ7.0A SMBJ7.0CA KM AM SMBJ7.5A SMBJ7.5CA KP AP SMBJ8.0A SMBJ8.0CA KR AR SMBJ8.5A SMBJ8.5CA KT AT SMBJ9.0A SMBJ9.0CA KV AV SMBJ10A SMBJ10CA KX AX SMBJ11A SMBJ11CA KZ AZ SMBJ12A SMBJ12CA LE BE SMBJ13A SMBJ13CA LG BG SMBJ14A SMBJ14CA LK BK SMBJ15A SMBJ15CA LM BM SMBJ16A SMBJ16CA LP BP SMBJ17A SMBJ17CA LR BR SMBJ18A SMBJ18CA LT BT SMBJ19A SMBJ19CA LB BB SMBJ20A SMBJ20CA LV BV SMBJ22A SMBJ22CA LX BX SMBJ24A SMBJ24CA LZ BZ SMBJ26A SMBJ26CA ME CE SMBJ28A SMBJ28CA MG CG SMBJ30A SMBJ30CA MK CK SMBJ33A SMBJ33CA MM CM SMBJ36A SMBJ36CA MP CP SMBJ40A SMBJ40CA MR CR SMBJ43A SMBJ43CA MT CT SMBJ45A SMBJ45CA MV CV SMBJ48A SMBJ48CA MX CX SMBJ51A SMBJ51CA MZ CZ SMBJ54A SMBJ54CA NE DE SMBJ58A SMBJ58CA NG DG SMBJ60A SMBJ60CA NK DK SMBJ64A SMBJ64CA NM DM SMBJ70A SMBJ70CA NP DP SMBJ75A SMBJ75CA NR DR SMBJ78A SMBJ78CA NT DT SMBJ80A SMBJ80CA NB DB
4 Part No. Marking Code UNI-POLAR BI-POLAR UNI-POLAR BI-POLAR Stand- Off V RWM (V) I T I T Test I T (ma) Max Clamping V C I PP Peak Pulse I PP (A) SMBJ85A SMBJ85CA NV DV SMBJ90A SMBJ90CA NX DX SMBJ100A SMBJ100CA NZ DZ SMBJ110A SMBJ110CA PE EE SMBJ120A SMBJ120CA PG EG SMBJ130A SMBJ130CA PK EK SMBJ140A SMBJ140CA PB EB SMBJ150A SMBJ150CA PM EM SMBJ160A SMBJ160CA PP EP SMBJ170A SMBJ170CA PR ER SMBJ180A SMBJ180CA PT ET Leakage I R V RWM SMBJ190A SMBJ190CA PW EW SMBJ200A SMBJ200CA PV EV SMBJ220A SMBJ220CA PX EX SMBJ250A SMBJ250CA PZ EZ SMBJ300A SMBJ300CA QE FE SMBJ350A SMBJ350CA QG FG SMBJ400A SMBJ400CA QK FK SMBJ440A SMBJ440CA QM FM Note: 1. Add suffix "CA" after Part number to specify Bi-directional devices. 2. For Bi-directional devices having VRWM of 10 voltages and under, the IR limit is doubled.
5 Ordering Information: Device PN Packing Part Number -T (1) G (2) -WS Tape & Reel Packing :3000pcs/Reel Note: 1. Packing code, T: Tape & 13 Reel Packing; 2. RoHS product for packing code suffix G, Halogen free product for packing code suffix "H". ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures.
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationSMBJ5.0 THRU SMBJ440CA
SMBJ5.0 THRU SMBJ440CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off : 5.0-440 Volts Peak pulse power: 600 Watts 0.087 (2.20) 0.071 (1.80) 0.096(2.44) 0.084(2.13) SMB/DO-214AA 0.180(4.57) 0.160(4.06)
More information200W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR. SMF Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 190 V Peak Pulse Power: 200 W Features Glass passivated chip 200 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. SMBJ5.(C)A - SMBJ17(C)A 6W SURFACE MOUNT TRANSIENT OLTAGE SUPPRESSOR Features
More informationSA Series. Working Voltage: 5.0 to 190 V Peak Pulae Power: 500 W 500W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DO-15 PACKAGE
Working : 5.0 to 190 V Peak Pulae Power: 500 W Features Glass passivated chip 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series
Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak
More informationPeak Pulse Power Dissipation on 10/1000us waveform (Note1,Note2, Fig.1). PPPM Minimum 600 Watts
TRANSIENT VOLTAGE SUPPRESSORS TM DESCRIPTION The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series
Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppressors. SMBJ Series. Circuit Protection System
Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More information5 to 70 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space AEC-Q101 qualified
More informationSMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More informationSMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationTransient Voltage Suppressors Diodes
Transient Voltage Suppressors Diodes Surface Mount - 6W > SMBJ5.~44CA Series The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationTransient Voltage Suppression Diodes: SMF Series SMD Type 200 W
Features 1. Low profile and space saving 2. For surface mounted applications 3. RoHS compliant 4. Reliable low cost construction utilizing molded plastic technique 5. Glass passivated chip 6. Both bi-directional
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationTV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationSMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD-123 Flat Lead Package
Zener Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,
More informationSurface Mount ESD Protection Diodes
Surface Mount ESD Protection Diodes 1 2 MARKING (example only) 20278 17249 XX YY Bar = cathode marking YY = type code (see table below) XX = date code 22623 DESIGN SUPPORT TOOLS click logo to get started
More informationSuface Mount Transient Voltage Suppressor
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from
More informationSZ1SMB Series. TVS Diodes. Surface Mount > 600W > SZ1SMB Series. Description
SZ1SMB Series Pb Description The SZ1SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Transient Suppressors Features Glass passivated junction. 600W Peak Pulse
More informationSMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
More information1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More information1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
1SMBAT3 Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They
More informationSMF SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A=25 C unless otherwise specified WTE
WTE POWER SEMICONDUCTORS SMF SERIES 200W SURFACE MOUNT TRANSIENT SUPPRESSOR Pb Features Glass Passivated Die Construction 200W Peak Pulse Power Dissipation A 5.0V 90V Standoff Voltage Uni- and Bi-Directional
More informationSMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD 123 Flat Lead Package
Zener Transient Voltage Suppressor SOD 123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationM C C SMBJ11AHE3 THRU SMBJ78CAHE3. Features. Transient Voltage Suppressor 11 to 78 Volts 600 Watt
omponents 2736 Marilla Street Chatsworth!"# $%!"# SMBJAHE3 THU SMBJ78CAHE3 Features For surface mount applicationsin order to optimize board space Lead Free Finish/ohs Compliant (Note) ("P"Suffix designates
More informationSMBJ SERIES RTCA DO-160G COMPLIANT PRODUCT 600 WATT TVS COMPONENT APPLICATIONS DO-214AA PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS
600 WATT TVS COMPONENT APPLICATIONS Power Supply AC/DC Applications Telecom DO-214AA PACKAGE FEATURES UL File Recognition #E208219 Compatible with IEC 61000-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationSILICON RECTIFIER SYMBOL. UNITS Maximum Recurrent Peak Reverse Voltage V RRM V RMS V DC I O I FSM I 2 T C J
SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 3. Amperes 1N54 THRU 1N548 FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-21AD MECHANICAL DATA * Case: Molded plastic
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationCD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
More informationMURS220 MURS240 MURS260
ULTRAFAST RECTIFIER VOLTAGE RANGE 2 to 6 CURRENT 2. Amperes MURS22 MURS24 MURS26 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Ultrafast switching speed *
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationTransient Voltage Suppression Diodes: SMAJ Series SMD Type 400 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More information5 to 220 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 220 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space Glass passivated
More informationNew Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationSURFACE MOUNT ZENER DIODE. VOLTAGE RANGE 2.4 to 43 Volts POWER RATING 500 mwatts
SURFACE MOUNT ZENER DIODE VOLTAGE RANGE 2.4 to 43 Volts POWER RATING 500 mwatts MMSZ468 MMSZ477 FEATURES * Wide Zener Reverse Voltage Range : 2.4V to 43V * 500mW Rating on FR4 or FR5 Board * Small Package
More informationSMF5.0AT1G Series, SZSMF5.0AT1G Series. 200 W Transient Voltage Suppressor SOD-123 Flat Lead Package
SMF5.AT1G Series, SZSMF5.AT1G Series 2 W Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.AT1G Series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationHIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes SYMBOL V RRM V RMS V DC HER201 I O I 2 T C J T J
HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes HER21 THRU HER28 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability * High speed
More informationTransient Voltage Suppression Diodes: SMAF Series SMD Low Profile Type 400 W
Features 1. Low profile and space saving 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSURFACE MOUNT SUPER FAST RECTIFIER. VOLTAGE RANGE 50 to 400 Volts CURRENT 0.5 Ampere. 300 Maximum RMS Voltage. 210 Maximum DC Blocking Voltage
SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 400 Volts CURRENT 0.5 Ampere 05E1L THRU 05E6L FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More informationSZSMF5.0AT1G Series. TVS Diodes. Surface Mount > 200W > SZSMF5.0AT1G Series. Bi-directional. Cathode. Anode. Uni-directional.
Surface Mount > 2W > SZSMF5.ATG Series SZSMF5.ATG Series Pb Description The SZSMF5.ATG Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping
More informationSUPER LOW Vf SCHOTTKY BARRIER RECTIFIER SYMBOL FML120B V RRM V RMS V DC I O C J T J T STG
SUPER LOW Vf SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 2 to 4 CURRENT 1. Ampere FML12B THRU FML14B FEATURES * Low switching noise * Low forward voltage drop * High current capability * High switching capability
More informationHIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes I O I 2 T R JC 15 C J Operating Temperature Range T J
HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 5 to CURRENT 2. Amperes HER21 THRU HER28 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability * High speed
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationSMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band.
SMA/DO-214AC Features: For surface mounted application. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time : typically less than 1.0ps
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More informationHIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Amperes I O I 2 T R θ JL R θ JA C J T J T STG
HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 3. Amperes HER31 THRU HER38 FEATURES * Low power loss,high efficiency * Low leakage * Low forward voltage drop * High current capability *
More information* Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 R2500F R3000F R4000F R5000F VRRM VRMS VDC IFSM. I 2 t 3.
HIGH VOLTAGE FAST RECOVER RECTIFIER R25F THRU R5F VOLTAGE RANGE 25 to 5 CURRENT.2 Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 MECHANICAL DATA * Case:
More informationVOLTAGE RANGE 50 to 600 Volts CURRENT 3.0 Amperes. UNITS Maximum Recurrent Peak Reverse Voltage SYMBOL V RRM V RMS V DC I O I FSM.
GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE to 6 CURRENT 3. Amperes SF3 THRU SF37 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching
More informationParameter Symbol Value Unit
*RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationHDB208LS. SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE 1000 Volts CURRENT 2.0 Ampere DB-LS FEATURES MECHANICAL DATA
HDB28LS SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE 1 CURRENT 2. Ampere FEATURES * Glass passivated device * Good for automation insertion * Low leakage current * Ideal for
More informationSYMBOL V RRM V RMS. Volts Maximum Average Forward Output Current at T A = 40 o C V DC I O I FSM. A 2 S 40 Typical Thermal Resistance (Note 2) TJ,TSTG
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes DB21S THRU DB27S FEATURES * Good for automation insertion * Surge overload rating - 6 amperes peak * Ideal
More informationDarlington Amplifier Transistor
We declare that the material of product compliance with RoHS requirements. ORDERING INFORMATION Device Marking Shipping MMBTA13LT1 1M 3000/Tape & Reel MMBTA14LT1 1N 3000/Tape & Reel MAXIMUM RATINGS Rating
More informationSURFACE MOUNT SUPER FAST RECTIFIER SYMBOL SE1 SE2 V RRM V RMS V DC I O C J T J T STG
SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 5 to 4 CURRENT. Ampere SE THRU SE6 FEATURES * High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching speed
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
More informationSINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes SYMBOL I O I FSM. R θ JC.
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 2. Amperes RS21 THRU RS27 FEATURES * Ideal for printed circuit board * Surge overload rating: 5 amperes peak * Weight:
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 1000 Volts CURRENT 4.0 Ampere SYMBOL
MSB47S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 1 CURRENT 4. Ampere FEATURES * Good for automation insertion * Ideal for printed circuit board * Reliable low cost construction
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationGLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSYMBOL. UNITS Maximum Recurrent Peak Reverse Voltage V RRM V RMS I O I FSM I 2 T. Viso T J, T STG
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to CURRENT 8. Amperes RS8M THRU RS87M FEATURES * Low leakage * Low forward voltage * Surge overload rating : amperes peak * Mounting
More informationSMBJ5V0(C)A - SMBJ170(C)A 600 Watt Transient Voltage Suppressors
SMBJ5V0(C)A - SMBJ170(C)A 600 Watt Transient Suppressors Features Glass-Passivated Junction 600 W Peak Pulse Power Capability on 10/0 μs Waveform. Excellent Clamping Capability Low-Incremental Surge Resistance
More informationBZX84C-BS SERIES 4.7V to 36V
BZX84C-BS SERIES 4.7V to 36V SILICON PLANAR VOLTAGE REGULATOR DIODE FEATURES * Zener Voltage Range 4.7 to 36 Volts * SOT-23 Package * Low Voltage General Purpose Voltage Regulator Diode SOT-23 MECHANICAL
More informationASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF
SMJ.0(C)-HF Thru. SMJ440(C)-HF Working Peak :.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free Features - 400W peak pulse power capability with a 0/000µs waveform, repetitive rate (duty
More informationSINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes V RRM V RMS V DC I O I FSM
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 4. Amperes RS41L THRU RS47L FEATURES * Ideal for printed circuit board * Surge overload rating: 15 amperes peak * Mounting
More informationSURFACE MOUNT SILICON RECTIFIER. VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere SYMBOL V RRM V RMS V DC I O I R IFSM. I 2 t
SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 5 to 1 Volts CURRENT Ampere SA1 THRU SA7 FEATURES * Ideal for surface mounted applications * Low leakage current *Metallurgically bonded construction *Mounting
More informationSILICON PLANAR ZENER DIODE. Vrm I FM I O. Maximum Average Forward Rectified Current I FSM I 2 T. Trr C T. pf Maximum Power Dissipation P D T J,T STG
SILICON PLANAR ZENER DIODE FEATURES * Fast Switching Device(T RR
More informationSURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER SYMBOL
SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 5 to 6 CURRENT 1. Ampere FEATURES * Glass passivated device * Ideal for surface mounted applications * Low leakage current * Metallurgically
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 400 W, 300 W I FSM 40 A
More informationSMAJ Transient Voltage Suppressor Diode Series
SMAJ Transient Voltage Suppressor Diode Series General Information The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationSURFACE MOUNT FAST RECOVERY RECTIFIER SYMBOL V RRM V RMS V DC I O I FSM T J, T STG SYMBOL. Maximum Instantaneous Forward Voltage at 1.
SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE 5 to 6 Volts CURRENT.5 Ampere 5F THRU 5F5 FEATURES * Fast switching * Low leakage * Low forward voltage drop * High current capability * High currenf
More information