P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.

Size: px
Start display at page:

Download "P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features."

Transcription

1 P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent clamping capability. -Low Zener impedance. -Fast response time: typically less than ps from volt to BV min. -Typical IR less than μa above V. (2.4) MIN..3(7.63).23(.8) D-.33(.84).27(.7) Mechanical Data -Epoxy: UL 94V- rate flame retardant -Case: Molded plastic D- -Terminals: Axial leads solderable per MIL-STD-22, Method 28 -Polarity: Color band denotes positive end (cathode) -Weight:.4 grams (2.4) MIN..42(3.6).2(2.6) Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics Symbol Parameter Value t Peak power dissipation with a /μs waveform (Note ) PPP 6 W Peak pulse current with a / μs waveform (Note ) IPP See Next Table A Power dissipation on infinite heatsink at TL=7 C PD. W Peak forward surge current, 8.3mS single half sine-wave unidirectional only (JEDEC method) (Note 2) IFSM A Maximum instantantaneous forward voltage at A for unidirectional only(note 3) VF 3./. V perating junction and storage temperature range TJ, TSTG - to + C NTES: () Non-repetitive current pulse, per fig. and derated above TA=2 C per fig. (2) Measured on 8.3ms single half sine-wave or equivalent square wave,equare wave,duty cycle=4 pulses per minute maximum (3) VF<3.V for devices of VBR<2V and VF<.V for devices of VBR>2V Page

2 RATING AND CHARACTERISTIC (P6KE-G Series) Part No. Absolute Maximum Rating (Ta=2 C) Electrical Characteristics (Ta=2 C) Marking Code. P6KE6.8-G P6KE6.8A-G P6KE7.-G P6KE7.A-G P6KE8.2-G P6KE8.2A-G P6KE9.-G P6KE9.A-G P6KE-G P6KEA-G P6KE-G P6KEA-G P6KE2-G P6KE2A-G P6KE3-G P6KE3A-G P6KE-G P6KEA-G P6KE6-G P6KE6A-G P6KE8-G P6KE8A-G P6KE2-G P6KE2A-G P6KE22-G P6KE22A-G P6KE24-G P6KE24A-G P6KE27-G P6KE27A-G P6KE3-G P6KE3A-G P6KE33-G P6KE33A-G P6KE36-G P6KE36A-G P6KE39-G P6KE39A-G P6KE43-G P6KE43A-G P6KE47-G P6KE47A-G P6KE-G P6KEA-G P6KE6.8C-G P6KE6.8CA-G P6KE7.C-G P6KE7.CA-G P6KE8.2C-G P6KE8.2CA-G P6KE9.C-G P6KE9.CA-G P6KEC-G P6KECA-G P6KEC-G P6KECA-G P6KE2C-G P6KE2CA-G P6KE3C-G P6KE3CA-G P6KEC-G P6KECA-G P6KE6C-G P6KE6CA-G P6KE8C-G P6KE8CA-G P6KE2C-G P6KE2CA-G P6KE22C-G P6KE22CA-G P6KE24C-G P6KE24CA-G P6KE27C-G P6KE27CA-G P6KE3C-G P6KE3CA-G P6KE33C-G P6KE33CA-G P6KE36C-G P6KE36CA-G P6KE39C-G P6KE39CA-G P6KE43C-G P6KE43CA-G P6KE47C-G P6KE47CA-G P6KEC-G P6KECA-G VRWM VBR Min. VBR Max. IT IFSM Max. Max. ( V ) ( V ) ( V ) ( ma ) (A)@8.3mS ( V ) IPPM (A) ua P6KE6.8 P6KE6.8C P6KE6.8A P6KE6.8CA P6KE7. P6KE7.C P6KE7.A P6KE7.CA P6KE8.2 P6KE8.2C P6KE8.2A P6KE8.2CA P6KE9. P6KE9.C P6KE9.A P6KE9.CA P6KE P6KEC P6KEA P6KECA P6KE P6KEC P6KEA P6KECA P6KE2 P4KE2C P6KE2A P6KE2CA P6KE3 P6KE3C P6KE3A P6KE3CA P6KE P6KEC P6KEA P6KECA P6KE6 P6KE6C P6KE6A P6KE6CA P6KE8 P6KE8C P6KE8A P6KE8CA P6KE2 P6KE2C P6KE2A P6KE2CA P6KE22 P6KE22C P6KE22A P6KE22CA P6KE24 P6KE24C P6KE24A P6KE24CA P6KE27 P6KE27C P6KE27A P6KE27CA P6KE3 P6KE3C P6KE3A P6KE3CA P6KE33 P6KE33C P6KE33A P6KE33CA P6KE36 P6KE36C P6KE36A P6KE36CA P6KE39 P6KE39C P6KE39A P6KE39CA P6KE43 P6KE43C P6KE43A P6KE43CA P6KE47 P6KE47C P6KE47A P6KE47CA P6KE P6KEC P6KEA P6KECA Page 2

3 VRWM VBR Max. IT IFSM ( V ) ( V ) ( ma ) (A)@8.3mS ( V ) IPPM (A) Part No. Absolute Maximum Rating (Ta=2 C) Electrical Characteristics (Ta=2 C) Max. Max. ua VBR Min. Marking Code. ( V ) P6KE6C-G P6KE6CA-G P6KE62C-G P6KE62CA-G P6KE68C-G P6KE68CA-G P6KE7C-G P6KE7CA-G P6KE82C-G P6KE82CA-G P6KE9C-G P6KE9CA-G P6KEC-G P6KECA-G P6KEC-G P6KECA-G P6KE2C-G P6KE2CA-G P6KE3C-G P6KE3CA-G P6KEC-G P6KECA-G P6KE6C-G P6KE6CA-G P6KE7C-G P6KE7CA-G P6KE8C-G P6KE8CA-G P6KE2C-G P6KE2CA-G P6KE22C-G P6KE22CA-G P6KE2C-G P6KE2CA-G P6KE3C-G P6KE3CA-G P6KE3C-G P6KE3CA-G P6KE38C-G P6KE38CA-G P6KE4C-G P6KE4CA-G P6KE44C-G P6KE44CA-G P6KE6 P6KE6A P6KE62 P6KE62A P6KE68 P6KE68A P6KE7 P6KE7A P6KE82 P6KE82A P6KE9 P6KE9A P6KE P6KEA P6KE P6KEA P6KE2 P6KE2A P6KE3 P6KE3A P6KE P6KEA P6KE6 P6KE6A P6KE7 P6KE7A P6KE8 P6KE8A P6KE2 P6KE2A P6KE22 P6KE22A P6KE2 P6KE2A P6KE3 P6KE3A P6KE3 P6KE3A P6KE38 P6KE38A P6KE6C P6KE6CA P6KE62C P6KE62CA P6KE68C P6KE68CA P6KE7C P6KE7CA P6KE82C P6KE82CA P6KE9C P6KE9CA P4KEC P6KECA P6KEC P6KECA P6KE2C P6KE2CA P6KE3C P6KE3CA P6KEC P6KECA P6KE6C P6KE6CA P6KE7C P6KE7CA P6KE8C P6KE8CA P6KE2C P6KE2CA P6KE22C P6KE22CA P6KE2C P6KE2CA P6KE3C P6KE3CA P6KE3C P6KE3CA P6KE38C P6KE38CA RATING AND CHARACTERISTIC (P6KE-G Series) Page 3 P6KE6-G P6KE6A-G P6KE62-G P6KE62A-G P6KE68-G P6KE68A-G P6KE7-G P6KE7A-G P6KE82-G P6KE82A-G P6KE9-G P6KE9A-G P6KE-G P6KEA-G P6KE-G P6KEA-G P6KE2-G P6KE2A-G P6KE3-G P6KE3A-G P6KE-G P6KEA-G P6KE6-G P6KE6A-G P6KE7-G P6KE7A-G P6KE8-G P6KE8A-G P6KE2-G P6KE2A-G P6KE22-G P6KE22A-G P6KE2-G P6KE2A-G P6KE3-G P6KE3A-G P6KE3-G P6KE3A-G P6KE38-G P6KE38A-G P6KE4-G P6KE4A-G P6KE44-G P6KE44A-G P6KE4 P6KE4A P6KE44 P6KE44A P6KE4C P6KE4CA P6KE44C P6KE44CA

4 RATING AND CHARACTERISTIC (P6KE-G Series) Part No. Absolute Maximum Rating (Ta=2 C) Electrical Characteristics (Ta=2 C) VRWM VBR Min. VBR Max. IT IFSM Max. Max. ( V ) ( V ) ( V ) ( ma ) (A)@8.3mS ( V ) IPPM (A) ua Marking Code. P6KE-G P6KEC-G P6KE P6KEC P6KEA-G P6KECA-G P6KEA P6KECA P6KE2-G P6KE2C-G P6KE2 P6KE2C P6KE2A-G P6KE2CA-G P6KE2A P6KE2CA P6KE-G P6KEC-G P6KE P6KEC P6KEA-G P6KECA-G P6KEA P6KECA P6KE6-G P6KE6C-G P6KE6 P6KE6C P6KE6A-G P6KE6CA-G P6KE6A P6KE6CA Page 4

5 RATING AND CHARACTERISTIC CURVES (P6KE-G Series) Fig. - Pulse Derating Curve Fig.2 - Maximum Non-Repetitive Surge Current Peak Pulse in Percentage of Peak Power or Current,(%) 7 2 Peak Forward Surge Current, (A) TJ=TJ Max 8.3 ms Single Half Sine-Wave Ambient Temperature,TA ( C) Number of Cycles at 6 Hz. Fig.3 - Steady State Power Derating Curve Fig.4 - Peak Pulse Power Rating Curve Steady State Power Dissipation, (W) Peak Power(kW) Lead Temperature, TL ( C).. Pulse Width,td (μs) Fig. - Pulse Waveform Fig.6 - Typical Junction Capacitance Peak Pulse Current, (%) TR=uS Peak Value (IPP) TJ=2 C td Half value=ipp/2 Pulse width(td) is defined as the point where the peak current decays to % of Ipp /μsec. waveform as defined by R.E.A. Junction Capacitance, (pf) bias bias VRWM TJ=2 C f=mhz Time, (ms) Reverse Breakdown Voltage, VBR (V) Page

6 Taping Specification For Axial Lead Diodes E T Z 9 ± L B L2 E T D- SYMBL (mm) (inch) A B Z T E L-L2. ±. 2. ±..2 (max) 6. ±.4 3 (max) (max).97± ±.2.47 (max).236 ±.6.8(max).39 (max) L H W Standard Packaging Case Type D- Inner BX Dimension (L*W*H) 22*8*7 BX Inner BX ( K ) 2 Box / Carton (EA) CARTN ( K ) 2 D- 26*7*4 3 3 Comchip Technology C., LTD. Page 6

Comchip 3KP-G Transient Voltage Suppressor Datasheet

Comchip 3KP-G Transient Voltage Suppressor Datasheet Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.

More information

ICTE5.0 THRU ICTE15C SERIES

ICTE5.0 THRU ICTE15C SERIES ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375

More information

P4KE Series RoHS Pb e3

P4KE Series RoHS Pb e3 P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4

More information

MCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.

MCC.  P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6. Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional

More information

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction

More information

Transient Voltage Suppression Diodes Axial Leaded 600W > P6KE series

Transient Voltage Suppression Diodes Axial Leaded 600W > P6KE series Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional

5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional 5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W

More information

30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional

30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional 3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation

More information

Rev. 02

Rev. 02 PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR

More information

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification

More information

TV06B5V0-HF Thru. TV06B441-HF

TV06B5V0-HF Thru. TV06B441-HF TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4

More information

MCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.

MCC.  P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6. Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant

More information

P6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional

P6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

Sales: Technical: Fax:

Sales: Technical: Fax: DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL

More information

TP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series

TP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation

More information

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

DEVICES FOR BIPOLAR APPLICATIONS

DEVICES FOR BIPOLAR APPLICATIONS SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass

More information

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

TV04A5V0-HF Thru. TV04A441-HF

TV04A5V0-HF Thru. TV04A441-HF TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive

More information

20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data

20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent

More information

ASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF

ASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF SMJ.0(C)-HF Thru. SMJ440(C)-HF Working Peak :.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free Features - 400W peak pulse power capability with a 0/000µs waveform, repetitive rate (duty

More information

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse

More information

Transient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.

Transient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C. TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

TV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device

TV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive

More information

15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional

15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional 5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

P6KE SERIES Taiwan Semiconductor

P6KE SERIES Taiwan Semiconductor 600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps

More information

Surface Mount Transient Voltage Suppressors

Surface Mount Transient Voltage Suppressors TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems.

More information

5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description

5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description 5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

FAIRCHILD TVS Is Now Part of

FAIRCHILD TVS Is Now Part of FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in

More information

TV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free

TV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility

More information

P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional

P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data

More information

3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description

3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description 3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning

More information

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability

More information

Transient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W

Transient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

China - Germany - Korea - Singapore - United States - smc-diodes.com

China - Germany - Korea - Singapore - United States   - smc-diodes.com TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory

More information

P4KE SERIES Taiwan Semiconductor

P4KE SERIES Taiwan Semiconductor 400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than

More information

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability

More information

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability

More information

P-600. Mechanical Dimensions:In Inches (mm) China - Germany - Korea - Singapore - United States - smc-diodes.

P-600. Mechanical Dimensions:In Inches (mm) China - Germany - Korea - Singapore - United States   - smc-diodes. Features: Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass Passivated Junction 15000W Peak Pulse Power Capability on 10/1000 μs waveform Voltage-17.0 to 280 Volts Excellent

More information

Symbol Description Value Unit Conditions. Minimum 600

Symbol Description Value Unit Conditions. Minimum 600 600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:

More information

SLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description

SLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15

More information

FAIRCHILD TVS Is Now Part of

FAIRCHILD TVS Is Now Part of FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in

More information

SMCJ5.0CA Thru SMCJ170CA

SMCJ5.0CA Thru SMCJ170CA Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced

More information

SA Series. Working Voltage: 5.0 to 190 V Peak Pulae Power: 500 W 500W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DO-15 PACKAGE

SA Series. Working Voltage: 5.0 to 190 V Peak Pulae Power: 500 W 500W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DO-15 PACKAGE Working : 5.0 to 190 V Peak Pulae Power: 500 W Features Glass passivated chip 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional

More information

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified 3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage

More information

GPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM

GPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability

More information

P6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description

P6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER

TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 1. Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO 41 MECHANICAL DATA * Case:

More information

CZRA4728-G Thru CZRA4764-G

CZRA4728-G Thru CZRA4764-G CZR4728-G Thru CZR4764-G Voltage: 3.3 to Volts Power:. Watts RoHS Device Features -Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. -Standard

More information

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.  FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

SMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional

SMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device

15,000 Watt Transient Voltage Suppressor (TVS) Protection Device Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

LCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional

LCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning

More information

1N4740A - 1M200Z. RoHS. Features

1N4740A - 1M200Z. RoHS. Features Pb RoHS COMPLIANCE N474A - M2Z CREAT BY ART. Watt Glass Passivated Junction Silicon Zener Diodes DO-4 Features Low profile package Built-in strain relief Glass passivated junction Low inductance Typical

More information

5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor

5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor 5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced

More information

1N4740A - 1M200Z. RoHS. Features

1N4740A - 1M200Z. RoHS. Features Pb RoHS COMPLIANCE N474A - M2Z CREAT BY ART. Watt Glass Passivated Junction Silicon Zener Diodes DO-4 Features Low profile package Built-in strain relief Glass passivated junction Low inductance Typical

More information

* Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 R2500F R3000F R4000F R5000F VRRM VRMS VDC IFSM. I 2 t 3.

* Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 R2500F R3000F R4000F R5000F VRRM VRMS VDC IFSM. I 2 t 3. HIGH VOLTAGE FAST RECOVER RECTIFIER R25F THRU R5F VOLTAGE RANGE 25 to 5 CURRENT.2 Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 MECHANICAL DATA * Case:

More information

M C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.

M C C.  SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt. omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)

More information

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product) 3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)

More information

ACZRA4728-HF Thru. ACZRA4764-HF

ACZRA4728-HF Thru. ACZRA4764-HF CZR4728-HF Thru. CZR4764-HF Voltage: 3.3 to Volts Power:. Watts RoHS Device Halogen Free Features -Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance.

More information

ATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features.

ATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features. orking Voltage: 36 Volts Peak Pulse Power: 66 atts RoHS Device eatures -Glass passivated chip. -66 peak pulse power capability with a 1/µs waveform, repetitive rate (duty cycle):.1% -Meets ISO7637-2 5a

More information

Transient Voltage Suppression Diodes Axial Leaded 500W > SA series

Transient Voltage Suppression Diodes Axial Leaded 500W > SA series Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency

More information

SMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series

SMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

SMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional

SMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from

More information

BZW04 SERIES Taiwan Semiconductor

BZW04 SERIES Taiwan Semiconductor W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible

More information

SA SERIES Taiwan Semiconductor

SA SERIES Taiwan Semiconductor 500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from

More information

TV15C5V0-G Thru. TV15C441-G

TV15C5V0-G Thru. TV15C441-G TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%

More information

Surface Mount > 600W > P6SMB11AT3G Series. Description. Features

Surface Mount > 600W > P6SMB11AT3G Series. Description. Features P6SMB11AT3G Series Pb OBSOLETE/EOL DATE June/30/2018 PCN/ECN# LFPCN41246 REPLACED BY P6SMB Series Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage,

More information

P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.   FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)

More information

Transient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W

Transient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional

More information

ATV15C5V0-G Thru. ATV15C441-G

ATV15C5V0-G Thru. ATV15C441-G TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%

More information

DO-15 China - Germany - Korea - Singapore - United States - smc-diodes.com

DO-15 China - Germany - Korea - Singapore - United States  - smc-diodes.com P6KE SERIES TRANSIENT VOLTAGE SUPPRESSOR Features: Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 6.8V- 440V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping

More information

SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMAJ5.0A THRU SMAJ300CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features SMA Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions

More information

ATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free

ATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free TV55V-HF Thru. TV544-HF Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive

More information

P6SMB Transient Voltage Suppressor Diode Series

P6SMB Transient Voltage Suppressor Diode Series P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping

More information

Transient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode

Transient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,

More information

6600W Transient Voltage Suppressor (TVS)

6600W Transient Voltage Suppressor (TVS) Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection

More information

SILICON RECTIFIER. VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS VRRM VRMS VDC IFSM

SILICON RECTIFIER. VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS VRRM VRMS VDC IFSM 1N4001 THRU 1N4007 SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability MECHANICAL DATA * Case: Molded

More information

P6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.

P6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional. P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge

More information

1N4736A SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA

1N4736A SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA N4736A SERIES SILICON ZENER DIODE VOLTAGE 6.8 to Volt POWER Watt FEATURES Low inductance High temperature soldering : 260 C /0 seconds at terminals Plastic package has Underwriters Laboratory Flammability

More information

Surface Mount > 600W > 1SMB10CAT3G Series. Description. Features

Surface Mount > 600W > 1SMB10CAT3G Series. Description. Features 1SMB10CAT3G Series Pb OBSOLETE/EOL DATE June/30/2018 PCN/ECN# LFPCN41246 REPLACED BY SMBJ Series Description The 1SMB10CAT3Gv series is designed to protect voltage sensitive components from high voltage,

More information

BZW04 Series. Features: DO-41. Mechanical Data. Page <1> 14/05/08 V1.1

BZW04 Series. Features: DO-41. Mechanical Data. Page <1> 14/05/08 V1.1 DO-41 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 400W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low impedancesurge resistance.

More information

t p = 10 ms T j initial = T amb

t p = 10 ms T j initial = T amb P6KE TRANSIL FEATURES Peak pulse power: 600 W (/0 µs ) Stand-off voltage range 6.8 to 440V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil

More information

5000W Surface Mount Transient Voltage Suppressor

5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent

More information

1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) TCDU1WW. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)

1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) TCDU1WW. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) 1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) 1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) Features Sintered glass passivated (SGP ) rectifier chip Low Profile with Chip Package

More information

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W

Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment

More information

t p = 10 ms T j initial = T amb

t p = 10 ms T j initial = T amb TRANSIL FEATURES Peak pulse power: 6 W (1/ µs ) Stand-off voltage range 6.8 to 44V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil diodes

More information

5.0SMDJxxS Series, Single Chip Design

5.0SMDJxxS Series, Single Chip Design 5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by

More information

SLD8S Series RoHS Pb e3

SLD8S Series RoHS Pb e3 SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional

More information

BZW06 SERIES Taiwan Semiconductor

BZW06 SERIES Taiwan Semiconductor 600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from

More information