TOOL GUIDE. for everyday machining. No-Vibration Solution Tool! TM. DoubleJet JET-STREAM TM. DoubleJet KOOL-CUT TM

Transcription

1 TOOL GUIDE for everyday machining DoubleJet JET-STREAM TM No-Vibration Solution Tool! TM DoubleJet KOOL-CUT TM Inch Volume 6

2 TABLE OF CONTENTS Carbide Turning Inserts 3 Square Toolholders 17 Boring Bars 26 Jet-Stream Toolholders and Bars 33 Carbide Boring Bars 40 No-Vibration Solution Tool! TM Bars 46 Threading Tools and Inserts 59 Kool-Cut Turning - Grooving - Part Off 63 Swiss Toolholders 76 Knurling Tools 81 Milling Cutters and Inserts 104 Live Centers 117 Tool Post and Quick Change Holders 129 Angle Heads 143 CAT 40 & 50 V-Flange Tooling 151 Retention Knobs 154 ER Collets 155 Tool Presetters 157 Smart Tool-Setter Tightening Fixtures 159

3 CARBIDE INSERTS TECHNOLOGY, QUALITY & PERFORMANCE WILL TURN MACHINING INTO PROFIT Call: Visit: 3

4 Turning Application Grade Specification Material Application Uninterrupted Cut Universal Interrupted Cut Hard Hard & Tough Tough Wear Resistant Impact & Wear Resistant Impact Resistant First Choice Second Choice Material ANSI Grade ISO Grade Uncoated PVD Coated CVD Coated High Cutting Speed Medium Cutting Speed Low Cutting Speed P M K N S H P Carbon Steel & Alloy Steel DPC15HT DPP30GT DPC25UT DPC35RT C6-C7 P20-P35 M20-M35 C6-C7 P10-P25 M10-M25 C5-C6 P15-P35 M15-M35 C5 P25-P45 M25-M45 M Stainless Steel DMC25HT DMC30UT C6-C7 P30 M25 C5-C6 P35 M35 K Cast Iron Ferrous Metal & Material DKU10HT DKC10UT DKC15RT C3-C4 M10-K10 S10 C2-C3 K10 P10 M10 C1-C2 K15 P15 M15 N Aluminum Non Ferrous Material DNU10GT DNX10UT DNU25GT DNP25GT C3-C7 K15 P10 M15 N15 S15 C1-C3 K25 P25 M25 N25 S25 C4-C8 M10 K10-N10 S10 C1-C3 P10 M15 K25-S25 S High Temp Super Alloy Multi Material DSP10HT DSP15HT DSP20HT DUP25GT DUP35GT C3-C4 M10 K10-N10 S10 C4-C8 P10 M10 K10 N10 S10 C3-C8 M20 K20 N20 S20 C3-C7 P15 M15 K15 N25 S25 C3-C7 P20 M25 K30 N30 S30 4 Call: Visit: sales@doriantool.com

5 Insert Grades 1 If inserts wear, reduce Spindle Speed RPM (n) increase Feed (fn) or change to a harder insert grade. 2 If inserts chip, increase Spindle Speed (n), decrease Feed (fn), or change to tougher insert grade. 3 For uninterrupted, continuous cuts, use hard and wear resistant insert. 4 For forgings, castings and interrupted cuts, use tough and impact resistant insert with larger nose radius. DPP30GT General Purpose for Alloy Steels. Second choice for Stainless Steels P30 (P15-P35) Substrate Thermal deformation and abrasion resistant substrate with PVD TiN DPC15HT For high speed turning of Alloy Steels, up to SFM. Most wear resistant steel grade Second choice for machining cast irons Second choice for finishing operation on Duplex, 316 and 316L (positive geometries only) P15 (P10-P25) Fine Grain Substrate (1600 Vickers) Not for interrupted cuts CVD Al2O3/TiN/TiCN/Alpha Al2O3/Nano-TiCN/MT-TiCN/TiN Nanolock Coating Technology (22 microns) DPC25UT Universal Turining Grade for Alloy Steels and easy to machine Stainless Steels (316, 316L) Medium Cutting Speeds, ideally at SFM. For light interrupted and continuous cuts P25 (P15-P35) Substrate (1550 Vickers) CVD Al2O3/TiN/TiCN/Alpha-Al2O3/Nano-TiCN/MT-TiCN/TiN Nanolock Coating Technology (22 microns) DPC35RT For heavily interrupted cuts, forgings, castings and uneven surfaces Tough and impact resistant substrate Slow cutting speeds, ideally at SFM. P40 (P25-P40) Substrate (1450 Vickers) For Steels and Stainless Steels CVD TiN/Al2O3/TiCN Nanolock Technology Coating DMC25HT High Performance Machining of austenitic stainless steels at higher SFM M25 (M15-M30) Substrate Not for interrupted cuts High cutting speeds, ideally at SFM. PVD Hyper 8 AlTiN Coating DMC30UT Tougher alternative to DMC25HT grade for stainless steels General Purpose for interrupted and continuous cuts For medium cutting speeds, ideally at SFM. M30 (M25-M40) Substrate (1475 Vickers) CVD TiN/TiCN/TiN Coating DKU10HT Wear and abrasion resistant, uncoated substrate Not for interrupted cuts K10 Substrate For hardened materials, and abrasive materials For very fine cuts DKC10UT Most wear resistant substrate for Nodular, Ductile and Gray Cast Irons and Hardened Steels K10 (K05-K15) Substrate (1700 Vickers) Up to 1300 SFM on Gray Cast Iron (GG) For high cutting speeds, 1000 SFM and above TAG-Turbo CVD Al2O3/TiC/TiCN/TiN Coating with special adhesion interlocking layer For uninterrupted cuts DNU10GT Uncoated, high wear resistant grade for aluminum, non-ferrous metals and plastics K10 (K05-K15) Substrate DNU25GT Uncoated, high wear resistant grade for aluminum, non-ferrous metals and plastics K25 Micrograin Substrate For continuous and light interrupted cuts DNX10UT Coated version of DNU10GT High wear resistant grade for machining aluminum, non-ferrous metals and plastics Micropulse Plasma TiAlN coating, ideal for finish machining (fine cuts) of stainless steels and high temp alloys DNP25GT Universal grade for high temp alloys, aluminum, non-ferrous and ferrous materials S25 Substrate with PVD TiN Coating Not for interrupted cuts DSP10HT For Titanium and Titanium Alloys (unalloyed Ti, alpha-alloys, alpha-beta alloys, beta-alloys) S10 Substrate (1700 Vickers) with CVD TiB2/TiN coating For cutting speeds SFM. DSP15HT Hardest grade for High Temp Alloys Medium to rough machining of high temp alloys and finish machining of stainless steels With SER chip-breaker, also suitable for Interrupted machining of high temp alloys With SEF & SEM chip-breakers, also use on aluminum, non-ferrous metals and plastics Submicron K30 Substrate with 3 micron PVD Super-Nitride AlTiN Coating DSP20HT Tougher alternative to DUP35RT grade For high temp alloys Inconel 718, Inconel 625, Nimonic, Udimet, Hastelloy, Waspalloy Submicron S20 Substrate (1700 Vickers) with 8 micron PVD AlTiN coating For cutting speeds SFM. DUP15VT Hard & wear resistant for high temp alloys, aluminum, non-ferrous and ferrous materials S15 Substrate with PVD AlCrN Coating Not for interrupted cuts DUP25GT Universal grade for high temp alloys, aluminum, non-ferrous and ferrous materials S25 Substrate with PVD TiAlN/WC/C Coating Not for interrupted cuts DUP35RT Tough, roughing grade for multi-material applications. For roughing of small parts with interrupted cuts. DKC15RT Tougher alternative to DKC10UT, for cast irons Optimal grade for Nodular Cast Iron (GG) and Gray Cast Iron (GGG) K15 (K10-K20) Substrate (1600 Vickers) CVD Al2O3/TiC/TiCN/TiN Coating Suitable for interrupted cuts in cast irons Call: Visit: sales@doriantool.com 5

6 Negative Inserts Material Application Chip Breaker Insert Harder Grade Tougher SFM a p Depth of Cut f n Feed Rate Surface foot per minute inch inch per Rev Finishing PEF DPC15HT DPC25UT DPC15HT Medium PEM DPC25UT DPC35RT DPC15HT Roughing PER DPC25UT DPC35RT P Steel & Alloy Steel Wiper (High Surface Finish) Medium and Precision Finishing For Thin Wall Tubing & Deep Boring PEX UEM UEX DPC15HT DPC25UT DPC15HT DPC25UT DPC35RT DPC15HT DPC25UT DPC35RT DPC15HT Roughing PSH DPC25UT DPC35RT Heavy Roughing PSS DPC15HT DPC25UT DPC35RT Extra Heavy Duty Roughing PST DPC15HT DPC25UT DPC35RT High Performance MEH DMC25HT M Stainless Steel Finishing MEF DMC30UT Medium MEM DMC30UT Roughing MER DMC30UT K Cast Iron Finishing KEF DKC10UT DKC10UT Roughing KER DKC15RT S Titanium & Super Alloy High Performance SEH DSP10HT (Titanium Only) DSP20HT S Titanium - Super Alloy & Multi-Material Finishing SEF DSP15HT Medium SEM DSP15HT Roughing SER DSP15HT Call: Visit: sales@doriantool.com

7 Positive Inserts Material Application Chip Breaker Insert Harder Grade Tougher SFM a p Depth of Cut f n Feed Rate Surface foot per minute inch inch per Rev General Purpose DNU25GT S Multi-Material Universal UEF DUP25GT Unstable Condition DUP35RT General Purpose DUP15VT Universal UEU DUP25GT Unstable Condition DPC35RT DPC15HT Finishing PEF DPC25UT DPC35RT DPC15HT P Steel & Alloy Steel Medium Universal PEM PEU DPC25UT DPC35RT DPC15HT DPC25UT DPC35RT High Performance DPC15HT Universal UEX DPC25UT Unstable Condition DPC35RT M Stainless Steel High Performance MEH DMC25HT Universal MEM DCM30UT K Cast Iron General Application KEM DKC15RT N Aluminum General Purpose DNU10GT NFU High Performance DNX10UT S Titanium & Super Alloy High Performance SEH DSP10HT (Titanium Only) DSP20HT Call: Visit: sales@doriantool.com 7

8 Multi-Material Applications Positive Precision Ground Inserts CDGX-UEFR 80º Diamond Universal CDGX-UEFL 80º Diamond Universal CCGX-UEFR 80º Diamond Universal CCGX-UEFL 80º Diamond Universal ANSI Grade Grade Grade DNU25GT DUP25GT DUP35RT CDGX UEFR CDGX UEFR CDGX UEFL CDGX UEFL CCGX UEFR CCGX UEFL Multi-Material Applications Positive Precision Ground Inserts CCGT-UEU 80º Diamond Universal CPGT-UEU 80º Diamond Universal DCGT-UEU 55º Diamond Universal ANSI Grade Grade Grade Grade DNU10GT DUP15VT DUP25GT DUP35RT CCGT UEU CCGT UEU CCGT UEU CCGT UEU CCGT UEU CCGT-431-UEU CCGT-432-UEU CPGT UEU CPGT UEU CPGT UEU CPGT UEU CPGT UEU DCGT UEU DCGT UEU DCGT UEU DCGT UEU DCGT UEU DCGT UEU DCGT UEU DCGT-431-UEU DCGT-432-UEU DCGX-UEFR 55º Diamond Universal DCGX-UEFL 55º Diamond Universal TCGX-UEFR 60º Triangle Universal DCGX UEFR DCGX UEFL TCGX UEFR TCGX UEFR TCGT-UEU 60º Triangle Universal TPGT-UEU 60º Triangle Universal TCGT UEU TCGT UEU TCGT UEU TCGT UEU TCGT UEU TCGT UEU TPGT UEU TPGT UEU TPGT UEU TPGT UEU TPGT UEU TPGT UEU VBGX-UEFR 35 Diamond Universal VBGX-221-UEFR VBGT-UEU 35º Diamond Universal VBGT-221-UEU VBGT-331-UEU VBGT-332-UEU VBGX-UEFL 35 Diamond Universal VCGX-UEFR 35º Diamond Universal VBGX-221-UEFL VCGX-221-UEFR VCGT-UEU 35º Diamond Universal VCGT UEU VCGT UEU VCGT-221-UEU VCGT UEU VCGT-331-UEU VCGT-332-UEU VCGX-UEFL 35º Diamond Universal VCGX-221-UEFL WCGT-UEU 80º Trigon Universal WCGT UEU WCGT UEU WCGT UEU WCGT UEU WCGT UEU Call: Visit: sales@doriantool.com

9 Multi-Material Applications Positive Precision Ground Inserts CDGW-KEU 80º Diamond Universal CCGW-KEU 80º Diamond Universal CPGW-KEU 80º Diamond Universal ANSI Grade Grade Grade DKU10HT DUP15VT DUP35RT CDGW KEU CDGW KEU CDGW KEU CDGW KEU CCGW KEU CCGW KEU CPGW KEU CPGW KEU CPGW KEU CPGW KEU CPGW KEU Multi-Material Applications Positive Ground Inserts TPG-UEN 60 Triangle General Purpose TPGB-UEN 60 Triangle General Purpose TPGH-UEN 60º Triangle General Purpose TPHT-UEN 60 Triangle General Purpose ANSI Grade Grade Grade DNU25GT DNP25GT DPP30GT TPG-221-UEN TPG-222-UEN TPG-321-UEN TPG-322-UEN TPG-431-UEN TPG-432-UEN TPG-543-UEN TPGB UEN TPGB UEN TPGB-321-UEN TPGB-322-UEN TPGB-431-UEN TPGB-432-UEN TPGH UEN TPGH UEN TPGH-321-UEN TPGH-322-UEN TPGH-431-UEN TPGH-432-UEN TPHT UEN TPHT UEN DCGW-KEU DCMW-KEU 55º Diamond Universal DCGW KEU DCMW KEU DCMW KEU Positive Convex Radius Inserts for Multi-Material Applications ANSI Radius Grade Grade DNU25GT DUP25GT SDGX-09C01-E SDGX-UEN SDGX-09C03-E /8" Square Convex Radius SDGX-09C04-E TCGW-KEU 60º Triangle Universal TPGW-KEU 60º Triangle Universal TCGW KEU TCGW KEU TPGW KEU TPGW KEU TPGW KEU SDGX-UEN 3/4 Square Convex Radius SDGX-19C05-E SDGX-19C06-E SDGX-19C07-E SDGX-19C08-E SDGX-19C09-E SDGX-19C10-E SDGX-19C11-E SDGX-19C12-E SDGX-19C13-E SDGX-19C14-E SDGX-19C15-E* SDGX-19C16-E* *All SDGX inserts have 4 cutting edges, except.234 &.250 radius inserts that have 2 cutting edges. VBGW-KEU 35º Diamond Universal VBGW-221-KEU VBGW-331-KEU VBGW-332-KEU VCGW-KEU 35º Diamond Universal VCGW-221-KEU VCGW-331-KEU VCGW-332-KEU Call: Visit: sales@doriantool.com 9

10 Aluminum Applications Ground & Polished Inserts CCGT-NFU 80º Diamond Universal DCGT-NFU 55º Diamond Universal RCMT-NFU Round Universal ANSI Grade Grade DNU10GT DNX10UT CCGT NFU CCGT NFU CCGT NFU CCGT NFU CCGT NFU CCGT-431-NFU CCGT-432-NFU DCGT NFU DCGT NFU DCGT NFU DCGT NFU DCGT NFU RCMT-0602MO-NFU Titanium & High Temp Alloy Applications Positive Inserts CCMT-SEH 80 Diamond Universal DCMT-SEH 55 Diamond Universal RCMT-SEH Round Roughing Titanium High Temp Grade ANSI Grade DSP10HT DSP15HT DSP20HT CCMT SEH DCMT SEH RCMX-1204MO-UEX RCMT-1606MO-SEH RCMT-2006MO-SEH RCGT-NFU Round Universal RCGT-0602MO-NFU RCGT-0803MO-NFU RCGT-1003MO-NFU SCGT-NFU Square Universal SCGT-432-NFU TCGT-NFU 60º Triangle Universal TCGT NFU TCGT NFU VCGT-NFU 35º Triangle Universal VCGT NFU VCGT-221-NFU VCGT NFU VCGT-331-NFU VCGT-332-NFU VCGT-333-NFU VCGT-448-NFU VPGT-NFU 35º Triangle Universal VPGT-444-NFU WCGT-NFU 80º Trigon Universal WCGT NFU WCGT NFU WCGT NFU WCGT-431-NFU WCGT-432-NFU Call: Visit:

11 Stainless Steel Applications Positive Inserts CCMT-MEM 80º Diamond Finishing/Medium ANSI Grade Grade DMC25HT DMC30UT CCMT MEM CCMT MEM CCMT-431-MEM CCMT-432-MEM Cast Iron Applications Positive Inserts CCMT-KEM 80º Diamond Finishing/Medium ANSI Grade Grade DKC10UT DKC15RT CCMT KEM CCMT KEM CCMT-432-KEM CCMT-MEH 80º Diamond High Performance CCMT MEH CCMT MEH CCMT MEH CCMT MEH CCMT-431-MEH CCMT-432-MEH DCMT-KEM 55º Diamond Finishing/Medium DCMT KEM DCMT KEM DCMT KEM DCMT KEM DCMT-MEF 55º Diamond Finishing DCMT MEF DCMT MEF SCMT-KEM Square Medium SCMT-432-KEM DCMT-MEM 55º Diamond Medium DCMT MEM DCMT MEM RCMX-UEX Round Medium RCMX-1606MO-UEX RCMX-2006MO-UEX RCMX-2507MO-UEX RCMX-3209MO-UEX DCMT-MEH 55º Diamond High Performance DCMT MEH DCMT MEH DCMT MEH SCMT-MEM Square Medium SCMT-432-MEM TCMT-MEM 60º Triangle Medium TCMT MEM TCMT MEM TCMT MEM TCMT MEM VCMT-MEM 35º Diamond Medium VCMT-331-MEM VCMT-332-MEM VCMT-333-MEM VCMT-MEH 35º Diamond Medium VCMT-331-MEH VCMT-332-MEH VCMT-333-MEH VBMT-MEH 35º Diamond Medium VBMT-331-MEH VBMT-332-MEH Call: Visit:

12 Alloy Steel Applications Positive Inserts CCMT-PEF 80º Diamond Finishing ANSI Grade Grade Grade DPC15HT DPC25UT DPC35RT CCMT PEF CCMT PEF CCMT PEF CCMT PEF CCMT PEF CCMT-431-PEF Alloy Steel Applications Positive Inserts VCMT-PEF 35º Diamond Finishing ANSI Grade Grade Grade DPC15HT DPC25UT DPC35RT VCMT-221-PEF VCMT331-PEF VCMT332-PEF CCMT-PEM 80º Diamond Medium DCMT-PEF 55º Diamond Finishing CCMT PEM CCMT PEM CCMT PEM CCMT PEM CCMT PEM CCMT-431-PEM CCMT-432-PEM DCMT PEF DCMT PEF DCMT PEF DCMT PEF VCMT-PEM 35º Diamond Medium WCMT-PEF 80º Trigon Finishing VCMT-331-PEM VCMT-332-PEM WCMT PEF DCMT-PEM 55º Diamond Medium RCMX-UEX Metric Round RCMT-UM Inch Round SCMT-PEF Square Finishing DCMT PEM DCMT PEM DCMT PEM RCMX-1003MO-UEX RCMX-1204MO-UEX RCMX-1606MO-UEX RCMX-2006MO-UEX RCMX-2507MO-UEX RCMX-3209MO-UEX RCMT-43-UM RCMT-64-UM RCMT-84-UM SCMT PEF Alloy Steel & Stainless Steel Applications Positive Precision Ground Inserts (for lower cutting pressure) CCGT-UEXL 80 Diamond Universal CCGT-UEXR 80 Diamond Universal ANSI Alloy Steel Alloy Steel Stainless Steel DPC25UT DPC35RT DMC30UT CCGT UEXL CCGT UEXL CCGT UEXL CCGT UEXL CCGT-432 UEXL CCGT-433 UEXL CCGT UEXR CCGT UEXR CCGT UEXR CCGT UEXR CCGT-432 UEXR CCGT-433 UEXR SCMT-PEM Square Medium SCMT PEM SCMT-432-PEM SCMT-433-PEM DCGT-UEXL 55 Diamond Medium DCGT UEXL DCGT UEXL DCGT UEXL TCMT-PEF 60º Triangle Finishing TCMT PEF TCMT PEF TCMT PEF DCGT-UEXR 55 Diamond Roughing DCGT UEXR DCGT UEXR DCGT UEXR TCMT-PEM 60º Triangle Medium TPMR-PEU 60º Triangle Medium TCMT PEM TCMT PEM TCMT PEM TCMT PEM TPMR-221-PEU TPMR-222-PEU TPMR-321-PEU TPMR-322-PEU TCGT-UEXL 60 Triangle Universal TCGT UEXL TCGT UEXL TCGT UEXL VBMT-PEF 35º Diamond Finishing VBMT-331-PEF VBMT-332-PEF VBMT-333-PEF TCGT-UEXR 60 Triangle Finishing/ Medium TCGT UEXR TCGT UEXR TCGT UEXR Call: Visit:

13 Alloy Steel Applications Negative Inserts CNMG-PEF 80º Diamond Finishing Grade ANSI DPC15HT DPC25UT DPC35RT CNMG-431-PEF CNMG-432-PEF Alloy Steel Applications Negative Inserts SNMG-PER Square Roughing Grade ANSI DPC15HT DPC25UT DPC35RT SNMG-432-PER SNMG-433-PER SNMG-643-PER SNMG-644-PER CNMG-UEM 80º Diamond Universal CNMG-431-UEM CNMG-432-UEM TNMG-PEF 60º Triangle Finishing TNMG-331-PEF TNMG-332-PEF CNMG-PEM 80º Diamond Medium CNMG-PER 80º Diamond Roughing CNMG-322-PEM CNMG-432-PEM CNMG-433-PEM CNMG-434-PEM CNMG-542-PEM CNMG-543-PEM CNMG-544-PEM CNMG-643-PEM CNMG-644-PEM CNMG-432-PER CNMG-433-PER CNMG-434-PER CNMG-542-PER CNMG-543-PER CNMG-544-PER CNMG-643-PER CNMG-644-PER CNMG-646-PER TNMG-UEM 60º Triangle Universal TNMG-PEM 60º Triangle Medium VNMG-PEF 35º Diamond Finishing TNMG-331-UEM TNMG-332-UEM TNMG-332-PEM TNMG-333-PEM TNMG-432-PEM TNMG-433-PEM VNMG-331-PEF VNMG-332-PEF DNMG-PEF 55º Diamond Finishing DNMG-UEM 55º Diamond Universal DNMG-PEM 55º Diamond Medium DNMG-331-PEF DNMG-332-PEF DNMG-431-PEF DNMG-432-PEF DNMG-441-PEF DNMG-442-PEF DNMG-331-UEM DNMG-332-UEM DNMG-432-UEM DNMG-441-UEM DNMG-442-UEM DNMG-332-PEM DNMG-432-PEM DNMG-433-PEM DNMG-442-PEM DNMG-443-PEM DNMG-444-PEM VNMG-UEM 35º Diamond Universal VNMG-PEM 35º Diamond Finishing VNMG-332-UEM VNMG-332-PEM VNMG-333-PEM DNMG-PER 55º Diamond Roughing DNMG-432-PER DNMG-433-PER DNMG-442-PER DNMG-443-PER DNMG-444-PER WNMG-UEM 80º Trigon Universal WNMG-331-UEM WNMG-332-UEM WNMG-431-UEM WNMG-432-UEM WNMG-433-UEM SNMG-PEF Square Finishing SNMG-431-PEF WNMG-PEM 80º Trigon Medium WNMG-332-PEM WNMG-432-PEM WNMG-433-PEM WNMG-434-PEM SNMG-UEM Square Universal SNMG-321-UEM WNMG-PER 80º Trigon Roughing WNMG-432-PER WNMG-433-PER WNMG-434-PER SNMG-PEM Square Medium SNMG-432-PEM SNMG-433-PEM SNMG-542-PEM SNMG-643-PEM Call: Visit:

14 Alloy Steel& Stainless Steel Applications Negative Inserts (for lower cutting pressure) CNMX-UEXL 80 Diamond ANSI Alloy Steel Alloy Steel Alloy Steel Stainless Steel DPC15HT DPC25UT DPC35RT DMC30UT CNMX-431-UEXL CNMX-432-UEXL Heavy Duty Roughing Steel Appplications Single Sided Negative Inserts CNMM-PSH 80º Diamond Roughing Grade ANSI DPC15HT DPC25UT DPC35RT CNMM-432-PSH CNMM-433-PSH CNMM-543-PSH CNMM-544-PSH CNMM-643-PSH CNMM-644-PSH CNMM-646-PSH CNMX-UEXR 80 Diamond CNMX-431-UEXR CNMX-432-UEXR CNMM-PSS 80º Diamond Heavy Roughing CNMM-644-PSS DNMX-UEXL 55 Diamond DNMX-331-UEXL DNMX-332-UEXL DNMX-431-UEXL DNMX-432-UEXL DNMX-441-UEXL DNMX-442-UEXL CNMM-PST 80º Diamond Extra Heavy Roughing DNMM-PSH 55º Diamond Extra Heavy Roughing CNMM-856-PST CNMM-866-PST DNMM-442-PSH DNMM-443-PSH DNMM-444-PSH DNMX-UEXR 55 Diamond DNMX-331-UEXR DNMX-332-UEXR DNMX-431-UEXR DNMX-432-UEXR TNMM-PSH 60º Diamond Extra Heavy Roughing TNMM-332-PSH TNMM-432-PSH TNMM-433-PSH DNMX-441-UEXR TNMX-UEL 60 Triangle DNMX-442-UEXR TNMX-321-UEXL TNMX-322-UEXL SNMM-PHS Square Roughing SNMM-432-PSH SNMM-433-PSH SNMM-543-PSH SNMM-544-PSH SNMM-643-PSH SNMM-644-PSH SNMM-646-PSH SNMM-648-PSH TNMX-UEXR 60 Triangle TNMX-321-UEXR TNMX-322-UEXR SNMM-PSS Square Heavy Roughing SNMM-PST Square Extra Heavy Roughing SNMM-644-PSS SNMM-646-PSS SNMM-856-PST SNMM-858-PST SNMM-866-PST SNMM-868-PST WNMX-UEXL 80 Trigon WNMX-432-UEXL WNMX-433-UEXL Wiper Inserts for Alloy Steel & Stainless Steel Applications CNMG-PEX 80 Diamond High Performance ANSI Grade Grade DPC15HT DPC25UT CNMG-432-PEX CNMG-433-PEX WNMX-UEXR 80 Trigon WNMX-432-UEXR WNMX-433-UEXR DNMG-PEX 55 Diamond High Performance DNMG-443-PEX WNMG-PEX 80 Trigon High Performance WNMG-432-PEX WNMG-433-PEX Call: Visit:

15 Stainless Steel Applications Negative Inserts CNMG-MEF 80 Diamond Finishing ANSI Grade Grade DMC25HT DMC30UT CNMG-321-MEF CNMG-431-MEF CNMG-432-MEF CNMG-433-MEF Stainless Steel Applications Negative Inserts TNMG-MEF 60 Triangle Finishing ANSI Grade Grade DMC25HT DMC30UT TNMG-331-MEF TNMG-332-MEF CNMG-MEM 80 Diamond Medium CNMG-432-MEM CNMG-433-MEM CNMG-543-MEM TNMG-MEM 60 Triangle Medium TNMG-332-MEM TNMG-333-MEM TNMG-432-MEM TNMG-433-MEM CNMG-MEH 80 Diamond High Performance CNMG-MER 80 Diamond Roughing CNMG-432-MEH CNMG-433-MEH CNMG-543-MEH CNMG-544-MEH CNMG-643-MEH CNMG-644-MEH CNMG-432-MER CNMG-433-MER CNMG-543-MER CNMG-643-MER WNMG-MEF 80 Trigon Finishing WNMG-MEH 80 Trigon High Performance WNMG-331-MEF WNMG-431-MEF WNMG-432-MEF WNMG-331-MEH WNMG-432-MEH WNMG-433-MEH WNMG-434-MEH DNMG-MEF 55 Diamond Finishing DNMG-331-MEF DNMG-332-MEF DNMG-441-MEF DNMG-442-MEF WNMG-MEM 80 Trigon Medium WNMG-332-MEM WNMG-432-MEM WNMG-433-MEM WNMG-434-MEM DNMG-MEM 55 Diamond Medium DNMG-332-MEM DNMG-432-MEM DNMG-442-MEM DNMG-443-MEM WNMG-MER 80 Trigon Roughing WNMG-432-MER WNMG-433-MER DNMG-MEH 55 Diamond High Performance DNMG-331-MEH DNMG-332-MEH DNMG-432-MEH DNMG-441-MEH DNMG-442-MEH DNMG-443-MEH DNMG-MER 55 Diamond Medium DNMG-442-MER DNMG-443-MER SNMG-MEF Square Finishing SNMG-321-MEF SNMG-MEM Square Medium SNMG-432-MEM SNMG-433-MEM SNMG-MEH Square High Performance SNMG-432-MEH SNMG-433-MEH SNMG-543-MEH SNMG-544-MEH SNMG-MER Square Roughing SNMG-432-MER SNMG-433-MER SNMG-643-MER Call: Visit:

16 Cast Iron Applications Negative Inserts CNMG-KEF 80º Diamond Finishing ANSI DKC10UT DKC15RT CNMG-431-KEF Titanium & High Temp Alloy Applications Negative Inserts CNGG-SEF 80º Diamond Finishing ANSI Titanium Grade High TempGradeHigh TempGrade DSP10HT DSP15HT DSP20HT CNGG-431-SEF CNGG-432-SEF CNGG-433-SEF CNMA-KEU 80º Diamond General Purpose CNMG-KEM 80º Diamond Medium CNMA-432-KEU CNMA-433-KEU CNMA-644-KEU CNMA-866-KEU CNMG-432-KEM CNMG-433-KEM CNM/GG-SEM 80º Diamond Medium CNGG-SER 80º Diamond Roughing CNGG-431-SEM CNGG-432-SEM CNGG-433-SEM CNMG-431-SEM CNMG-432-SEM CNGG-432-SER CNGG-433-SER CNMG-KER 80º Diamond Roughing DNMG-KEF 55º Diamond Finishing CNMG-432-KER CNMG-433-KER CNMG-434-KER CNMG-543-KER CNMG-544-KER DNMG-331-KEF CNMG-SEH 80º Diamond Roughing DNGG-SEF 55º Diamond Finishing CNMG-432-SEH DNGG-431-SEF DNGG-432-SEF DNGG-433-SEF DNGG-441-SEF DNGG-442-SEF DNGG-443-SEF DNMA-KEU 55º Diamond General Purpose DNMG-KER 55º Diamond Roughing DNMA-442-KEU DNMA-443-KEU DNMG-432-KER DNMG-433-KER DNMG-442-KER DNMG-443-KER DNMG-SEM 55º Diamond Medium DNMG-SEH 55º Diamond Roughing VNMG-SEF 35º Diamond Finishing DNMG-431-SEM DNMG-432-SEM DNMG-433-SEM DNMG-441-SEM DNMG-442-SEM DNMG-443-SEM DNMG-442-SEH VNMG-331-SEF VNMG-332-SEF SNMA-KEU Square General Purpose SNMA-432-KEU SNMA-433-KEU SNMA-434-KEU SNMA-664-KEU SNMA-856-KEU WNGG-SEF 80º Trigon Finishing WNGG-332-SEF WNGG-431-SEF WNGG-432-SEF WNGG-433-SEF SNMG-KER Square Roughing SNMG-432-KER SNMG-433-KER SNMG-643-KER SNMG-644-KER WNM/GG-SEM 80º Trigon Medium WNGG-431-SEM WNGG-432-SEM WNGG-433-SEM WNMG-431-SEM WNMG-432-SEM WNMG-433-SEM TNMA-KEU Triangle General Purpose TNMA-332-KEU TNMA-333-KEU TNMA-434-KEU WNMG-SEH 80º Trigon Medium WNMG-432-SEH WNMA-KEU 80º Trigon General Purpose WNMA-432-KEU WNMA-433-KEU SNMG-SEF Square Finishing SNMG-432-SEF SNMG-433-SEF WNMA-KER 80º Trigon Roughing WNMG-432-KER WNMG-433-KER SNMG-SER Square Roughing SNMG-432-SER SNMG-433-SER Call: Visit:

17 TOOL HOLDERS & BORING BARS MADE IN U.S.A. Chromium-Molylodenum Alloy Steel Thru Hardened to 44HRC Better than ANSI / ISO Tolerances Hardware Part Numbers Lasered on Tools for Easy Ordering Largest Selection of Tooling Styles and Sizes Call: Visit: sales@doriantool.com 17

18 MCFN R/L Toolholder Style F - 0 End Cutting Edge Angle for negative 80 diamond CNM_ inserts Height CNM_ Length Gage Insert MCFNR/L12-4B MCFNR/L16-4C MCFNR/L16-4D MCFNR/L16-5D MCFNR/L16-6D MCMNN Toolholder Style M - 40 Side Cutting Edge Angle for negative 80 diamond CNM_ inserts Neutral Height Length MCMNN12-4B MCMNN16-4D MCMNN16-5D MCMNN20-5D CNM_ Gage Insert MCMNN20-6D MCGN R/L Toolholder Style G- 0 Side Cutting Edge Angle for negative 80 diamond CNM_ inserts Height CNM_ Length Gage Insert MCGNR/L12-4B MCGNR/L16-4C MCGNR/L16-4D MCGNR/L16-5D MCGNR/L16-6D MCGNR/L85-6D MCKN R/L Toolholder Style K- 15 End Cutting Edge Angle for negative 80 diamond CNM_ inserts Height Length MCKNR/L12-4B MCKNR/L16-4C MCKNR/L16-4D MCKNR/L20-4D MCKNR/L16-5D MCKNR/L20-5D MCKNR/L85-5D MCKNR/L20-6D MCKNR/L24-6E MCKNR/L86-6E MCLNR/L08-3A MCLNR/L10-3A MCLN R/L Toolholder Style L - Negative 5 End or Side Cutting Edge Angle for negative 80 diamond CNM_ inserts Height Length MCLNR/L12-3B MCLNR/L16-3C MCLNR/L10-4B MCLNR/L12-4B MCLNR/L16-4C MCLNR/L16-4D MCLNR/L20-4D MCLNR/L24-4D MCLNR/L24-4E MCLNR/L85-4D MCLNR/L16-5C MCLNR/L16-5D MCLNR/L20-5D MCLNR/L16-6C MCLNR/L16-6D MCLNR/L20-6D MCLNR/L20-6E MCLNR/L24-6D MCLNR/L24-6E MCLNR/L85-6D MCLNR/L86-6E CNM_ Gage Insert CNM_ Gage Insert MCRN R/L Toolholder Style R- 15 Side Cutting Edge Angle for negative 80 diamond CNM_ inserts Height CNM_ Length Gage Insert MCRNR/L12-3B MCRNR/L12-4B MCRNR/L16-4C MCRNR/L16-4D MCRNR/L20-4D MCRNR/L24-4E MCRNR/L16-5D MCRNR/L20-5D MCRNR/L85-5D MCRNR/L16-6D MCRNR/L20-6D MCRNR/L24-6E MCRNR/L86-6E MCYNN Toolholder Style Y - 50 Side Cutting Edge Angle for negative 80 diamond CNM_ inserts Neutral Height Length MCYNN12-4B MCYNN16-4D MCYNN20-6D MCYNN24-6E CNM_ Gage Insert MDGN R/L Toolholder Style G- 0 Side Cutting Edge Angle for negative 55 diamond DNM_ inserts Height DNM_ Length Gage Insert MDGNR/L12-4B MDGNR/L16-5D MDJN R/L Toolholder Style J- 3 Side Cutting Edge Angle for negative 55 diamond DNM_ inserts Height Length MDJNR/L08-3A DNM_ Gage Insert MDJNR/L10-3B MDJNR/L12-3B MDJNR/L16-3C MDJNR/L16-3D MDJNR/L12-4B MDJNR/L16-4C MDJNR/L16-4D MDJNR/L20-4D MDJNR/L24-4D MDJNR/L24-4E MDJNR/L85-4D MDJNR/L16-5C MDJNR/L16-5D MDJNR/L20-5D MDJNR/L24-5D MDJNR/L24-5E MDJNR/L86-5E Call: Visit: sales@doriantool.com

19 MDPNN Toolholder Style P Side Cutting Edge Angle for negative 55 diamond DNM_ inserts Neutral Height Length MDPNN12-4B MDPNN16-4D MDPNN20-4D MDPNN16-5D MDPNN20-5D MDPNN24-5D MDQN R/L Toolholder Style Q Side Cutting Edge Angle for negative 55 diamond DNM_ inserts Height Length MDQNR/L12-4B MDQNR/L16-4C MDQNR/L16-4D MDQNR/L20-4D MDQNR/L24-4D MDQNR/L20-5D MDQNR/L24-5E DNM_ Gage Insert DNM_ Gage Insert MSDNN Toolholder Style D - 45 Side Cutting Edge Angle for negative square SNM_ inserts SNM_ Neutral Height Length Gage Insert MSDNN08-3A MSDNN08-3B MSDNN10-3B MSDNN12-3B MSDNN12-4B MSDNN16-4D MSDNN85-4D MSDNN16-5D MSDNN20-5D MSDNN85-5D MSDNN16-6D MSDNN20-6D MSDNN20-6E MSDNN24-6E MSDNN86-6E MSKN R/L Toolholder Style K- 15 End Cutting Edge Angle for negative square SNM_ inserts Height SNM_ Length Gage Insert MSKNR/L08-3A MSKNR/L08-3B MSKNR/L10-3B MSKNR/L12-3B MSKNR/L12-4B MSKNR/L16-4C MSKNR/L16-4D MSKNR/L16-5D MSKNR/L20-5D MSKNR/L20-6D MSKNR/L24-6D MSKNR/L24-6E MSSN R/L Toolholder Style S- 45 Side Cutting Edge Angle for negative square SNM_ inserts Height SNM_ Length Gage Insert MSSNR/L08-3A MSSNR/L08-3B MSSNR/L12-4B MSSNR/L16-4D MSSNR/L85-4D MSSNR/L16-5D MSSNR/L20-5D MSSNR/L20-5E MSSNR/L20-6D MSSNR/L24-6E MSRN R/L Toolholder Style R- 15 Side Cutting Edge Angle for negative square SNM_ inserts Height SNM_ Length Gage Insert MSRNR/L08-3A MSRNR/L08-3B MSRNR/L10-3B MSRNR/L12-3B MSRNR/L12-4B MSRNR/L16-4C MSRNR/L16-4D MSRNR/L20-4D MSRNR/L85-4D MSRNR/L16-5C MSRNR/L16-5D MSRNR/L20-5D MSRNR/L85-5D MSRNR/L16-6D MSRNR/L20-6D MSRNR/L24-6E MSRNR/L85-6D MTAN R/L Toolholder Style A- 0 Side Cutting Edge Angle for negative triangle TNM_ inserts Height TNM_ Length Gage Insert MTANR/L08-2A MTANR/L10-2B MTANR/L10-3B MTANR/L12-3B MTANR/L16-3D MTANR/L64-3D MTANR/L16-4D MTANR/L85-4D MTANR/L86-4E MTANR/L16-5D or 332* MTANR/L20-5E MTANR/L24-6E * Change shim to ITSN-322 when using TNMG-332 inserts MTCNN Toolholder Style C- 0 End Cutting Edge Angle for negative triangle TNM_ inserts Neutral Height Length 432 TNM_ Gage Insert MTCNN08-3B or MTCNN44-3F * MTCNN12-4B MTCNN64-4D MTCNN66-4E MTCNN66-4F * Change shim to ITSN-322 when using TNMG-332 inserts MTENN Toolholder Style E- 30 Side Cutting Edge Angle for negative triangle TNM_ inserts Neutral Height Length 432 TNM_ Gage Insert MTENN08-2A MTENN10-3B MTENN12-3B or 332* MTENN12-4B MTENN16-4D MTENN85-4D MTENN86-4E MTENN20-5D MTENN20-5E MTENN24-5E * Change shim to ITSN-322 when using TNMG-332 inserts Call: Visit: sales@doriantool.com 19

20 MTFN R/L Toolholder Style F- 0 End Cutting Edge Angle for negative triangle TNM_ inserts Height TNM_ Length Gage Insert MTFNR/L08-2A MTFNR/L10-3B MTFNR/L12-3B or MTFNR/L16-3D * MTFNR/L16-4C MTFNR/L16-4D MTFNR/L20-4D MTFNR/L85-4D MTFNR/L16-5D MTFNR/L20-5D MTFNR/L24-6E * Change shim to ITSN-322 when using TNMG-332 inserts MTGN R/L Toolholder Style G- 0 Side Cutting Edge Angle for negative triangle TNM_ inserts Height TNM_ Length Gage Insert MTGNR/L08-2A MTGNR/L10-2B MTGNR/L10-3B MTGNR/L12-3B MTGNR/L16-3C MTGNR/L16-3D MTGNR/L16-4C MTGNR/L16-4D MTGNR/L20-4D MTGNR/L24-4D MTGNR/L85-4D MTGNR/L86-4E MTGNR/L16-5C MTGNR/L16-5D MTGNR/L20-5D MTGNR/L24-5E or 332* MTGNR/L24-6E * Change shim to ITSN-322 when using TNMG-332 inserts MTJN R/L Toolholder Style J- 3 Side Cutting Edge Angle for negative triangle TNM_ inserts Height TNM_ Length Gage Insert MTJNR/L08-2A MTJNR/L10-2B MTJNR/L10-3B MTJNR/L12-3B or MTJNR/L16-3D * MTJNR/L16-4D MTJNR/L20-4D MTJNR/L20-4E MTJNR/L16-5D MTJNR/L20-5D MTJNR/L24-5E MTJNR/L85-5D MTJNR/L86-5E MTJNR/L24-6E * Change shim to ITSN-322 when using TNMG-332 inserts MTRN R/L Toolholder Style R - 15 Side Cutting Edge Angle for negative triangle TNM_ inserts Height TNM_ Length Gage Insert MTRNR/L08-2A MTRNR/L10-2B MTRNR/L16-3D or 332* MTRNR/L16-4D MTRNR/L20-4D MTRNR/L85-4D MTRNR/L16-5D MTRNR/L20-5D MTRNR/L24-6E * Change shim to ITSN-322 when using TNMG-332 inserts MTWN R/L Toolholder Style W - 10 Side Cutting Edge Angle for negative triangle TNM_ inserts Height TNM_ Length Gage Insert MTWNR/L12-3B or 332* MTWNR/L16-4D MTWNR/L20-4D * Change shim to ITSN-322 when using TNMG-332 inserts MVGN R/L Toolholder Style G- 0º Side Cutting Edge Angle for negative 35 diamond VNM_ inserts Height VNM_ Length Gage Insert MVGNR/L12-3B MVGNR/L16-3D MVGNR/L16-4D MVJN R/L Toolholder Style J- Negative 3 Side Cutting Edge Angle for negative 35 diamond VNM_ inserts Height VNM_ Length Gage Insert MVJNR/L12-3B MVJNR/L16-3C MVJNR/L16-3D MVJNR/L20-3D MVJNR/L24-3E MVJNR/L12-4B MVJNR/L16-4C MVJNR/L16-4D MVJNR/L20-4D MVJNR/L24-4E MVLN R/L Toolholder Style L- Negative 5 End Cutting Edge Angle for negative 35 diamond VNM_ inserts Height VNM_ Length Gage Insert MVLNR/L16-4C MVLNR/L16-4D MVLNR/L20-4D MVLNR/L24-4D MVTN R/L Toolholder Style N- Negative 27.5 End Cutting Edge Angle for negative 35 diamond VNM_ inserts Height VNM_ Length Gage Insert MVTNR/L12-3B MVTNR/L16-3C MVTNR/L16-3D MVTNR/L20-3D MVTNR/L24-3E MVVNN Toolholder Style V Side Cutting Edge Angle for negative 35 diamond VNM_ inserts Neutral Height Length MVVNN12-3B MVVNN16-3C MVVNN16-3D MVVNN16-4C MVVNN16-4D VNM_ Gage Insert Call: Visit: sales@doriantool.com

21 MRGO R/L Toolholder Style G- Profiling, Plunging and Turning for positive round RCM_ inserts Height RCM_ Length Gage Insert MRGOR/L85-4D MRGOR/L20-6E MRGOR/L24-8E WTJN R/L Toolholder Style J- 3 Side Cutting Edge Angle for negative triangle TNM_ inserts TNM_ Height Length Gage Insert WTJNR/L12-3C WTJNR/L16-3D MRGN R/L Toolholder Style G- 0 Side Cutting Edge Angle for negative round RNM_ inserts Height RNM_ Length Gage Insert MRGNR/L08-3A MRGNR/L10-3B MRGNR/L12-3B MRGNR/L16-3D MRGNR/L10-4B MRGNR/L12-4B MRGNR/L16-4C MRGNR/L16-4D MRGNR/L20-4D MRGNR/L24-4E MRGNR/L85-4D MRGNR/L86-4E MRGNR/L16-5D MRGNR/L20-6D MRGNR/L24-6E WWLN R/L Toolholder Style L- 5 End or Side Cutting Edge Angle for negative 80 trigon WNM_ inserts WNM_ Height Length Gage Insert WWLNR/L16-4D CKJNR Toolholder Style J- 3 Side Cutting Edge Angle for negative KNUX inserts KNUX Height Length Gage Insert CKJNR12-5C CKJNR20-5E MWLN R/L Toolholder Style L- Negative 5 End or Side Cutting Edge Angle for negative 80 trigon WNM_ inserts Height WNM_ Length Gage Insert MWLNR/L12-3B MWLNR/L16-3C MWLNR/L12-4B MWLNR/L12-4D MWLNR/L16-4C MWLNR/L16-4D MWLNR/L20-4D MWLNR/L20-4E MWLNR/L85-4E MWLNR/L16-5D MWLNR/L20-5D TA R/L Toolholder Style A- 0 Side Cutting Edge Angle for negative triangle TNM_ inserts Height TNM_ Length Gage Insert TAR/L08-2B TAR/L10-3B TAR/L12-3B TAR/L16-4D TEN Toolholder Style E- 30 Side Cutting Edge Angle for negative triangle TNM_ inserts TNM_ Neutral Height Length Gage Insert TE10-3B TE12-3B TE16-4D CSBP R/L Toolholder Style B- 15 Side Cutting Edge Angle for 11 positive square SPG inserts Height SPG Length Gage Insert CSBPR/L10-3B CSBPR/L12-3B CSBPR/L12-4B CSDPN Toolholder Style D- 45 Side Cutting Edge Angle for 11 positive square SPG inserts SPG Neutral Height Length Gage Insert CSDPN08-3J CSDPN10-3B CSDPN12-3B CSDPN12-4B CSDPN16-4D CSDPN16-6D CSDPN85-6D CSDPN86-6E CSRP R/L Toolholder Style R- 15 Side Cutting Edge Angle for 11 positive square SPG inserts Height SPG Length Gage Insert CSRPR/L08-3J CSRPR/L16-6D CSRPR/L85-6D CSRPR/L86-6E TG R/L Toolholder Style G- 0 Side Cutting Edge Angle for negative triangle TNM_ inserts TNM_ Height Length Gage Insert TGR/L08-2B TGR/L10-3B TGR/L12-3B TGR/L16-4D CTAP R/L Toolholder Style A- 0 Side Cutting Edge Angle for 11 positive triangle TPG inserts Height TPG Length Gage Insert CTAPR/L06-2J CTAPR/L08-2J CTAPR/L10-2B CTAPR/L12-3B CTAPR/L16-3D CTAPR/L65-3D CTAPR/L16-4D CTAPR/L85-4D Call: Visit: sales@doriantool.com 21

22 CTCON Toolholder Style C- 0 End Cutting Edge Angle for 11 positive triangle TPG inserts TPG Neutral Height Length Gage Insert CTCON08-3J CTCON44-3F CTCON12-4B CTCON64-4F CTCON66-4F CTFP R/L Toolholder Style F- 0 End Cutting Edge Angle for 11 positive triangle TPG inserts Height TPG Length Gage Insert CTFPR/L10-3B CTFPR/L12-3B CTFPR/L16-3D CTFPR/L12-4B CTFPR/L16-4C CTFPR/L16-4D CTFPR/L20-4D CTFPR/L85-4D CTGP R/L Toolholder Style G- 0 Side Cutting Edge Angle for 11 positive triangle TPG inserts Height TPG Length Gage Insert CTGPR/L10-3B CTGPR/L12-3B CTGPR/L16-4C CTGPR/L16-4D CTGPR/L20-4D CTGPR/L85-4D CTGPR/L16-5D CTGPR/L20-5D CTGPR/L24-5E SCLC R/L Toolholder Style L- Negative 5 End or Side Cutting Edge Angle for 7 positive 80 diamond CC_T inserts Height CC_T Length Gage Insert SCLCR/L SCLCR/L06-2J SCLCR/L10-2A SCLCR/L08-3A SCLCR/L10-3A SCLCR/L10-3B SCLCR/L12-3B SCLCR/L16-3D SCLCR/L12-4B SCLCR/L16-4D SCMCN Toolholder Style M- 40 Side Cutting Edge Angle for 7 positive 80 diamond CC_T inserts CC_T Neutral Height Length Gage Insert SCMCN08-2J SCMCN10-2A SCMCN08-3J SCMCN08-3A SCMCN10-3A SCMCN10-3B SCMCN12-3B SCMCN16-3D SCRC R/L Toolholder Style R -15 Side Cutting Edge Angle for 7 positive 80 diamond CC_T inserts Height CC_T Length Gage Insert SCRCR/L SCRCR/L08-2J SCRCR/L10-3A CTRP R/L Toolholder Style R- 15 Side Cutting Edge Angle for 11 positive triangle TPG inserts Height TPG Length Gage Insert CTRPR/L10-2B CTRPR/L12-3B CTRPR/L16-3D CTRPR/L85-4D SCYCN Toolholder Style Y- 50 Side Cutting Edge Angle for 7 positive 80 diamond CC_T inserts CC_T Neutral Height Length Gage Insert SCYCN06-2J SCYCN08-3A SCYCN12-4B CTCE R/L Toolholder Style L -10 End Cutting Edge Angle for 20 positive triangle TEGE inserts Height TEGE Length Gage Insert CTCER/L SCGC R/L Toolholder Style G- 0 Side Cutting Edge Angle for 7 positive 80 diamond CC_T inserts Height CC_T Length Gage Insert SCGCR/L SCGCR/L06-2J SCGCR/L08-2A SCGCR/L10-3A SCGCR/L12-3B SCGP R/L Toolholder Style G- 0 End Cutting Edge Angle for 11 positive 80 diamond CP_T inserts Height CP_T Length Gage Insert SCGPR/L SCGPR/L08-3J SCGPR/L12-3B SCLP R/L Toolholder Style L -Negative 5 End or Side Cutting Edge Angle for 11 positive 80 diamond CP_T inserts Height CP_T Length Gage Insert SCLPR/L08-3J SCLPR/L12-3B Call: Visit: sales@doriantool.com

23 SDJC R/L Toolholder Style J- Negative 3 Side Cutting Edge Angle for 7 positive 55 diamond DC_T inserts Height DC_T Length Gage Insert SDJCR/L06-2J SDJCR/L08-2A SDJCR/L08-3A SDJCR/L10-3B SDJCR/L12-3B SDJCR/L16-3D SDJCR/L16-4D SDPCN Toolholder Style P Side Cutting Edge Angle for 7 positive 55 diamond DC_T inserts DC_T Neutral Height Length Gage Insert SDPCN06-2J SDPCN06-2D SDPCN08-2A SDPCN08-3D SDPCN10-3B SDPCN10-3D SDPCN12-3B SDPCN16-3D SDPCN12-4B SDPCN16-4D SROPN Toolholder Style O- Profiling, Plunging and Turning for 11 positive round RP_T inserts RP_T Neutral Height Length Gage Insert SROPN16-10D SROPN20-10D MO SRGP R/L Toolholder Style G- Profiling, Plunging and Turning for 11 positive round RP_T inserts Height RP_T Length Gage Insert SRGPR/L16-10D MO SRCP R/L Toolholder Style C- Profiling, Plunging and Turning for 11 positive round RP_T inserts Height RP_T Length Gage Insert SRCPR/L12-10B MO SDUC R/L Toolholder Style U- 3 End Cutting Edge Angle for 7 positive 55 diamond DC_T inserts Height DC_T Length Gage Insert SDUCR/L08-2J SDUCR/L10-2A SDUCR/L10-3A SROCN Toolholder Style O- Profiling, Plunging and Turning for 7 positive round RC_T inserts RC_T Neutral Height Length Gage Insert SROCN20-10D MO SRGC R/L Tolholder Style G- Profiling, Plunging and Turning for 7 positive round RC_T inserts Height RC_T Length Gage Insert SRGCR/L16-06D MO SRGCR/L12-08B MO SRGCR/L12-10B SRGCR/L20-10D MO SRCC R/L Toolholder Style C- Profiling, Plunging and Turning for 7 positive round RC_T inserts Height RC_T Length Gage Insert SRCCR/L12-06B SRCCR/L16-06D MO SRCCR/L12-08B SRCCR/L16-08D MO SRCCR/L12-10B MO SSDCN Toolholder Style D - 45 Side Cutting Edge Angle for 7 positive square SC_T inserts SC_T Neutral Height Length Gage Insert SSDCN08-3A SSDCN10-3B SSDCN12-3B SSDCN16-4D SSRC R/L Toolholder Style R - 15 Side Cutting Edge Angle for 7 positive square SC_T inserts Height SC_T Length Gage Insert SSRCR/L08-3A SSRCR/L10-3A SSRCR/L10-3B SSRCR/L12-3B SSRCR/L16-4C SSRCR/L16-4D STAC R/L Toolholder Style A- 0 Side Cutting Edge Angle for 7 positive triangle TC_T inserts Height TC_T Length Gage Insert STACR/L STACR/L08-2J STACR/L10-2A STACR/L10-3B STACR/L12-3B STACR/L64-3D STACR/L85-4D STACR/L106-4D STCCR Toolholder Style C - 0 End Cutting Edge Angle for 7 positive triangle TC_T inserts TC_T Height Length Gage Insert STCCR STCCR08-2J STCCR12-3B STCCR64-3D STCCR85-4D STCCR106-4D Call: Visit: sales@doriantool.com 23

24 STDCR Toolholder Style D - 45 Side Cutting Edge Angle for 7 positive triangle TC_T inserts TC_T Height Length Gage Insert STDCR STDCR08-2J STDCR10-2A STDCR12-3B STDCR64-3D STDCR85-4D STDCR106-4D STECN Toolholder Style E- 30 Side Cutting Edge Angle for 7 positive triangle TC_T inserts TC_T Neutral Height Length Gage Insert STECN STECN08-2J STECN12-3B STECN64-3D STECN85-4D STECN106-4D STFC R/L Toolholder Style F- 0 End Cutting Edge Angle for 7 positive triangle TC_T inserts Height TC_T Length Gage Insert STFCR/L STFCR/L08-2J STFCR/L10-2A STFCR/L10-3B STFCR/L16-3D STFCR/L20-4D STGC R/L Toolholder Style G- 0 Side Cutting Edge Angle for 7 positive triangle TC_T inserts Height TC_T Length Gage Insert STGCR/L STGCR/L08-2J STGCR/L10-2A STGCR/L10-3B STGCR/L12-3B STGCR/L20-4D STJC R/L Toolholder Style J- 3 Side Cutting Edge Angle for 7 positive triangle TC_T inserts Height TC_T Length Gage Insert STJCR/L STJCR/L08-2J STJCR/L10-2A STJCR/L10-3B STJCR/L12-3B STJCR/L16-3D STJCR/L20-4D STNC R/L Toolholder Style N - 3 Side Cutting Edge Angle for 7 positive triangle TC_T inserts Height TC_T Length Gage Insert STNCR/L STNCR/L08-2J STNCR/L10-2A STNCR/L10-2B STNCR/L12-3B STNCR/L64-3D STNCR/L85-4D STNCR/L106-4D STFP R/L Toolholder Style F - 0 End Cutting Edge Angle for 11 positive triangle TP_T inserts Height TC_T Length Gage Insert STFPR/L STFPR/L08-2J STGP R/L Toolholder Style G - 0 Side Cutting Edge Angle for 11 positive triangle TP_T inserts Height TC_T Length Gage Insert STGPR/L STGPR/L08-2J SVJB R/L Toolholder Style J - Negative 3 Side Cutting Edge Angle for 5 positive 35 diamond VB_T inserts Height VB_T Length Gage Insert SVJBR/L SVJBR/L08-2J SVJBR/L10-2A SVJBR/L12-3B SVJBR/L16-3C SVJBR/L16-3D SVUB R/L Toolholder Style U - 3 End Cutting Edge Angle for 5 positive 35 diamond VB_T inserts Height VB_T Length Gage Insert SVUBR/L08-2J SVUBR/L10-2A SVVBN Toolholder Style V Side Cutting Edge Angle for 5 positive 35 diamond VB_T inserts VB_T Neutral Height Length Gage Insert SVVBN12-3B SVVBN16-3D SVJC R/L Toolholder Style J - Negative 3 Side Cutting Edge Angle for 7 positive 35 diamond VC_T inserts Height VC_T Length Gage Insert SVJCR/L06-2J SVJCR/L08-2A SVJCR/L10-2B SVJCR/L12-3B SVJCR/L16-3D SVJCR/L16-4D SVVCN Toolholder Style V Side Cutting Edge Angle for 7 positive 35 diamond VC_T inserts VC_T Neutral Height Length Gage Insert SVVCN20-3D Call: Visit: sales@doriantool.com

25 SVTC R/L Toolholder Style T End Cutting Edge Angle for 7 positive 35 diamond VC_T inserts Height VC_T Length Gage Insert SVTCR/L16-4D SVTCR/L20-4D NEW Single Clamp Toolholders SVJP R/L Toolholder Style J - Negative 3 Side Cutting Edge Angle for 11 positive 35 diamond VP_T inserts Height VC_T Length Gage Insert SVJPR/L16-4D SVJPR/L20-4D SVLP R/L Toolholder Style L - 5 End Cutting Edge Angle for 11 positive 35 diamond VP_T inserts Height VP_T Length Gage Insert SVLPR/L16-4D SVLPR/L20-4D SSQD R Toolholder Style Q - Convex Radius Cutting Edge for 15 positive square convex SDGX inserts SDGX Height Length Gage Insert SSQDR12-6B SSQDR16-6D C_ SSQDR20-6D SSQDR12-6B C_ SSQDR20-6D SWLC R/L Toolholder Style L - Negative 5 End or Side Cutting Edge Angle for 7 positive 80 trigon WC_T inserts Height WC_T Length Gage Insert SWLCR/L06-2J SWLCR/L08-3A SWLCR/L10-3B SWLCR/L12-3B SWLCR/L12-4B SWLCR/L16-4D DDPNN Toolholder Style P º side cutting lead angle for negative 55º diamond DNM_ inserts DNM_ Neutral Height Length Gage Insert DDPNN12-4B DDPNN16-4D DDPNN20-4D DTENN Toolholder Style E - 30º side cutting lead angle for negative triangle TNM_ inserts TNM_Gage Neutral Height Length Insert DTENN12-3B DTENN16-3D DTENN16-4D DTJN R/L Toolholder Style J - 3º side cutting lead angle for negative triangle TNM_ inserts Height TNM_ Length Gage Insert DTJNR/L12-3B DTJNR/L16-3D DTJNR/L16-4D DCLN R/L Toolholder Style L - 5º end or side cutting lead angle for negative 80º diamond CNM_ inserts Height CNM_ Length Gage Insert DCLNR/L12-4B DCLNR/L16-4D DCLNR/L20-4D DVJN R/L Toolholder Style J - Negative 3º side cutting lead angle for negative 35º diamond VNM_ inserts VNM_ Gage Insert Height Length DVJNR/L12-3B DVJNR/L16-3D DVJNR/L20-3D DDJN R/L Toolholder Style J - 3º side cutting lead angle for negative 55º diamond DNM_ inserts Height DNM_ Length Gage Insert DDJNR/L12-4B DDJNR/L16-4D DDJNR/L20-4D DWLN R/L Toolholder Style L - Negative 5º end or side cutting lead angle for negative 80º trigon WNM_ inserts Height WNM_ Length Gage Insert DWLNR/L12-4B DWLNR/L16-4D Call: Visit: sales@doriantool.com 25

26 S-MCKN R/L Boring Bar Style K - Negative 15 End Cutting Edge Angle for negative 80 diamond CNM_ inserts Min. Bore Bar Size CNM_ Gage Insert S20U-MCKNR/L S24U-MCKNR/L S32V-MCKNR/L S32V-MCKNR/L S-MCLN R/L Boring Bar Style L - Negative 5 Side & End Cutting Edge Angle for negative 80 diamond CNM_ inserts Min. Bore Bar Size CNM_ Gage Insert S12S-MCLNR/L S16T-MCLNR/L S12S-MCLNR/L S16T-MCLNR/L S20U-MCLNR/L S24U-MCLNR/L S28U-MCLNR/L S32V-MCLNR/L S24U-MCLNR/L S32V-MCLNR/L S40V-MCLNR/L S48Y-MCLNR/L S32V-MCLNR/L S36V-MCLNR S40V-MCLNR/L S-MTFN R/L Boring Bar Style F - 0 End Cutting Edge Angle for negative triangle TNM_ inserts Min. Bore Bar Size TNM_ Gage Insert S12S-MTFNR S16T-MTFNR/L S20U-MTFNR/L S24U-MTFNR S28U-MTFNR/L S20U-MTFNR/L S24U-MTFNR/L S28U-MTFNR/L S32V-MTFNR/L S36V-MTFNR S40V-MTFNR/L S48Y-MTFNR/L S-MTUN R/L Boring Bar Style U - Negative 3 End Cutting Edge Angle for negative triangle TNM_ inserts Min. Bore Bar Size TNM_ Gage Insert S12S-MTUNR/L S16T-MTUNR/L S20U-MTUNR/L S24U-MTUNR/L S20U-MTUNR/L S24U-MTUNR/L S32V-MTUNR/L S40V-MTUNR/L S-MDPN R/L Boring Bar Style P - Negative 27.5 End Cutting Edge Angle for negative 55 diamond DNM_ inserts Min. Bore Bar Size DNM_ Gage Insert S20U-MDPNR/L S24U-MDPNR/L S-MDQN R/L Boring Bar Style Q - Negative 17.5 End Cutting Edge Angle for negative 55 diamond DNM_ inserts Min. Bore Bar Size DNM_ Gage Insert S20U-MDQNR S24U-MDQNR/L S-MDUN R/L Boring Bar Style U - Negative 3 End Cutting Edge Angle for negative 55 diamond DNM_ inserts Min. Bore Bar Size DNM_ Gage Insert S16T-MDUNR/L S20U-MDUNR/L S24U-MDUNR/L S28U-MDUNR/L S32V-MDUNR/L S32V-MDUNR/L S36V-MDUNR/L S40V-MDUNR/L S-MVUN R/L Boring Bar Style U - Negative 3 Side Cutting Edge Angle for negative 35 diamond VNM_ inserts Min. Bore Bar Size VNM_ Gage Insert S16T-MVUNR/L S20U-MVUNR/L S24U-MVUNR/L S28U-MVUNR/L S32V-MVUNR/L S40V-MVUNR/L S-MVXN R/L Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for negative 35 diamond VNM_ inserts Min. Bore Bar Size VNM_ Gage Insert S24U-MVXNR/L S28U-MVXNR/L S32V-MVXNR S-MWLN R/L Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for negative trigon WNM_ inserts Min. Bore Bar Size WNM_ Gage Insert S12S-MWLNR/L S16T-MWLNR/L S16T-MWLNR/L S20U-MWLNR/L S24U-MWLNR/L S-MSKN R/L Boring Bar Style K - 15 End Cutting Edge Angle for negative square SNM_ inserts Min. Bore Bar Size SNM_ Gage Insert S20U-MSKNR/L S24U-MSKNR/L S28U-MSKNR S32V-MSKNR/L S40V-MSKNR/L Call: Visit: sales@doriantool.com

27 S-CTFP R/L Boring Bar Style F - 0 End Cutting Edge Angle for 11º positive triangle TPG inserts Min. Bore Bar Size TPG Gage Insert S08R-CTFPR/L S10S-CTFPR/L S12S-CTFPR/L S16T-CTFPR/L S20U-CTFPR/L S24U-CTFPR/L S28U-CTFPR/L S20U-CTFPR/L S24U-CTFPR/L S28U-CTFPR/L S32V-CTFPR/L S36V-CTFPR/L S40V-CTFPR/L S48Y-CTFPR/L S-SVQB R/L Boring Bar Style Q - Negative 5 End Cutting Edge Angle for 5 positive 35 diamond VB_T inserts Min. Bore Bar Size VB_T Gage Insert S10S-SVQBR/L S12S-SVQBR/L S16T-SVQBR S-SCFC R/L Boring Bar Style F - 0 End Cutting Edge Angle for 7 positive 80 diamond CC_T inserts Min. Bore Bar Size CC_T Gage Insert S06M-SCFCL S08R-SCFCR S10S-SCFCR S12S-SCFCR/L S16T-SCFCR S-SCLC R/L Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for 7 positive 80 diamond CC_T inserts Min. Bore Bar Size CC_T Gage Insert S06M-SCLCR/L S08M-SCLCR/L S10R-SCLCR/L S08M-SCLCR/L S10R-SCLCR/L S12S-SCLCR/L S16T-SCLCR/L S16T-SCLCR/L S20U-SCLCR/L S24U-SCLCR/L S-SDXC R/L Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 7 positive 55 diamond DC_T inserts Min. Bore Bar Size DC_T Gage Insert S08R-SDXCR/L S10S-SDXCL S12S-SDXCR/L S16T-SDXCR/L S-SSKC R/L Boring Bar Style K -15 End Cutting Edge Angle for 7 positive square SC_T inserts Min. Bore Bar Size SC_T Gage Insert S10R-SSKCR/L S12S-SSKCR/L S16T-SSKCR S-STFC R/L Boring Bar Style F - 0 End Cutting Edge Angle for 7 positive triangle TC_T inserts Min. Bore Bar Size TC_T Gage Insert S06M-STFCR/L S08M-STFCR/L S10R-STFCR/L S12S-STFCR/L S16T-STFCR/L S20U-STFCR/L S24U-STFCL S-STUC R Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive triangle TC_T inserts Min. Bar TC_T Bore Size Gage Insert S06M-STUCR S08M-STUCR S10R-STUCR S12S-STUCR S16T-STUCR S20T-STUCR S24T-STUCR S-SVMC R Boring Bar Style M - Negative 5 Side Cutting Edge Angle for 7 positive 35 diamond VC_T inserts Min. Bore Bar Size VC_T Gage Insert S08R-SVMCR S10S-SVMCR S12S-SVMCR S16T-SVMCR S-SDUC R/L Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive 55 diamond DC_T inserts Min. Bore Bar Size DC_T Gage Insert S06M-SDUCR/L S08M-SDUCR/L S10R-SDUCR/L S12S-SDUCR/L S16T-SDUCR/L S20U-SDUCR/L S16T-SDUCR/L S-SDQC R/L Boring Bar Style Q - Negative 17.5 End Cutting Edge Angle for 7 positive 55 diamond DC_T inserts Min. Bore Bar Size DC_T Gage Insert S08M-SDQCR S10R-SDQCR/L S12S-SDQCR S-SVQC R Boring Bar Style Q - Negative 17.5 End Cutting Edge Angle for 7 positive 35 diamond VC_T inserts Min. Bar VC_T Bore Size Gage Insert S10R-SVQCR S12S-SVQCR S16T-SVQCR S-SVUC R/L Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive 35 diamond VC_T inserts Min. Bar VC_T Bore Size Gage Insert S12S-SVUCR/L S16T-SVUCR S16T-SVUCR/L S20U-SVUCR/L Call: Visit: sales@doriantool.com 27

28 S-SVXC R/L Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 7 positive 35 diamond VC_T inserts Min. Bore Bar Size VC_T Gage Insert S12S-SVXCR S16T-SVXCR S16T-SVXCR/L S20U-SVXCR/L S-SWUC R/L Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive 80 trigon WC_T inserts Min. Bore Bar Size WC_T Gage Insert S06M-SWUCR/L S08M-SWUCR/L S10R-SWUCR/L S08M-SWUCR/L S10R-SWUCR/L S12S-SWUCR/L S16T-SWUCR/L S24U-SWUCR S-STLP R Boring Bar Style L - Negative 5 End Cutting Edge Angle for 11 positive triangle TPGH and TPGB inserts Min. Bar TPG_ Bore Size Gage Insert S06M-STLPR S08M-STLPR S10R-STLPR S12S-STLPR S16T-STLPR S20T-STLPR S-STUP R/L Boring Bar Style U - Negative 3 End Cutting Edge Angle for 11 positive triangle TPGH and TPGB inserts Min. Bore Bar Size TPG_ Gage Insert S16T-STUPR/L S24U-STUPR/L S28U-STUPR/L S32V-STUPR S40V-STUPR S-SCFP R Boring Bar Style F - 0 End Cutting Edge Angle for 11 positive 80 diamond CP_T inserts Min. Bore Bar Size S06M-SCFPR S08R-SCFPR S10S-SCFPR CP_T Gage Insert STCMB Boring Bar - Roughing to Finishing, Square Shoulders to Through Bores for 7 positive triangle TCMT Inserts Min. Bar TC_T Bore Size Gage Insert STCMB STCMB STCMB STCMB STCMB STCMB S-SCLP R/L Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for 11 positive 80 diamond CP_T inserts Min. Bore Bar Size CP_T Gage Insert S06M-SCLPR S08R-SCLPR/L S10S-SCLPR/L S10S-SCLPR/L S12S-SCLPR/L S16T-SCLPR/L TPBN Boring Bar - Roughing to Finishing, Square Shoulders to Through Bores for 11 positive triangle TPGH or TPGB Inserts Min. Bar TP_ Bore Size Gage Insert TPBN TPBN TPBN TPBN TPBN TPBN TPBN TPBN S-SDUP R/L Boring Bar Style U - Negative 3 End Cutting Edge Angle for 11 positive 55 diamond DP_T inserts Min. Bore Bar Size DP_T Gage Insert S06M-SDUPR/L S08R-SDUPR S12S-SDUPR/L S16T-SDUPR/L MINI S-SCLC R/L Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for 7 positive 80 diamond CC_T inserts Min. Bore Bar Size CC_T Gage Insert S06H-SCLCR/L S08K-SCLCR/L S10M-SCLCR/L S-SDXP R/L Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 11 positive 55 diamond DP_T inserts Min. Bore Bar Size DP_T Gage Insert S10S-SDXPR S16T-SDXPL MINI S-SDUC R/L Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive 55 diamond DC_T inserts Min. Bore Bar Size DC_T Gage Insert S06H-SDUCR S08K-SDUCR/L S10M-SDUCR S-STFP R/L Boring Bar Style F - 0 End Cutting Edge Angle for 11 positive triangle TPGB and TPGH inserts Min. Bar TPG_ Bore Size Gage Insert S06M-STFPR/L S08M-STFPR/L S10R-STFPR/L S12S-STFPR MINI S-STUC R Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive triangle TC_T inserts Min. Bar TC_T Bore Size Gage Insert S08H-STUCR S08H-STUCR S08H-STUCR Call: Visit: sales@doriantool.com

29 MINI S-SWUC R Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive 80 trigon WC_T inserts Min. Bar WC_T Bore Size Gage Insert S08H-SWUCR S08H-SWUCR S08H-SWUCR S06H-SWUCR S08K-SWUCR S10M-SWUCR MINI S-DTUC R Boring Bar Style U - Negative 3 End or Side Cutting Edge Angle for double 7 positive triangle TC_T inserts Min. Bar TC_T Bore Size Gage Insert S08K-DTUC S12M-DTUC S16Q-DTUC S20R-DTUC S-DCLNR Boring Bar Style L - Negative 5 End or Side Cutting Edge Angle for two 80 diamond CNM_ inserts Min. Bar CNM_ Bore Size Gage Insert S16T-DCLN S20U-DCLN S24U-DCLN S24U-DCLN S-DTUNR Boring Bar Style U - Negative 3 End or Side Cutting Edge Angle for two triangle TNM_ inserts Min. Bar TNM_ Bore Size Gage Insert S16Q-DTUN S20R-DTUN S16T-DTUN S32V-DTUN S-DTUN_T R Bar Style U - Negative 3 End or Side Cutting Edge Angle for one negative triangle TNM_ & one Laydown insert Min. Bar TNM_ Bore Size Gage Insert S20R-DTUN-3-T S16T-DTUN-3-T S-DWLN R Boring Bar Style L - Negative 5 End or Side Cutting Edge Angle for negative 80 trigon WNM_ inserts Min. Bar WNM_ Bore Size Gage Insert S12M-DWLN S20R-DWLN S20U-DWLN S24U-DWLN MINI S-DCLC R Boring Bar Style L - Negative 5 End or Side Cutting Edge Angle for double 7 positive 80 diamond CC_T inserts Min. Bar CC_T Bore Size Gage Insert S08K-DCLC S10L-DCLC S12M-DCLC S16Q-DCLC S20R-DCLC MINI S-DTUC-T R Bar Style U - Negative 3 End or Side Cutting Edge Angle for one 7 positive triangle TC_T & one Laydown inserts Min. Bar TC_T Bore Size Gage Insert S08K-DTUC-2-T S16Q-DTUC-3-T S20R-DTUC-3-T Call: Visit: sales@doriantool.com 29

30 STUCR Miniature Boring Set Negative 3 End Cutting Edge Angle for 7 positive 60 triangle inserts TPBN Medium Boring Set Negative 5 End Cutting Edge Angle for 11 positive 60 triangle inserts Small hole boring without the use of reamers Greater productivity through better tool utilization Close tolerances Eliminates reamers Better surface finish Alloy steel boring bar For a Precise Bore with a Quality Boring Bar From Roughing To Finishing Square Shoulders to Through Bores x 10 PCS. x 20 PCS. Set Size Min. Bore Piece Set Includes 3 Boring Bars 10 Inserts 1 Torx Key 1 Storage Box S08H-STUCR S08H-STUCR S08H-STUCR TCMT PEF-DPC25UT T-6 Storage Box Set Size Min. Bore Piece Set Includes 4 Boring Bars 20 Inserts 2 Torx Keys 1 Storage Box TPBN06-2 TPBN08-2 TPBN10-2 TPBN12-3 (10) TPGH EZ-DPP30GT (10) TPGH-321- EZ-DPP30GT T-8 T-10 Storage Box SCLCR Miniature Boring Set Negative 5 End Cutting Edge Angle for 7 positive 80 diamond inserts SDUCR Miniature Boring Set Negative 3 End Cutting Edge Angle for 7 positive 55 diamond inserts Precision finishing operation For steel & stainless steel Sharp cutting edge Good chip control Precision finishing operation For steel & stainless steel Sharp cutting edge Good chip control x 10 PCS. x 10 PCS. Set Size Min. Bore Piece Set Includes 3 Boring Bars 10 Inserts 1 Torx Key 1 Storage Box S06H-SCLCR-2 S08K-SCLCR-2 S10M-SCLCR-2 CCMT PEM-DPC25UT T-8 Storage Box Set Size Min. Bore Piece Set Includes 3 Boring Bars 10 Inserts 1 Torx Key 1 Storage Box S06H-SDUCR-2 S08K-SDUCR-2 S10M-SDUCR-2 DCMT PEF-DPC25UT T-8 Storage Box SWUCR Medium Boring Set Negative 3 End Cutting Edge Angle for 7 positive 80 trigon inserts SWUCR Miniature Boring Set Negative 3 End Cutting Edge Angle for 7 positive 80 trigon inserts Precision finishing operation For steel & stainless steel Sharp cutting edge Good chip control Precision finishing operation For steel & stainless steel Sharp cutting edge Good chip control x 10 PCS. x 10 PCS. Set Size Min. Bore Piece Set Includes 3 Boring Bars 10 Inserts 1 Torx Key 1 Storage Box S06H-SWUCR-2 S08K-SWUCR-2 S10M-SWUCR-2 WCGT UEU-DUP15VT T-8 Storage Box Set Size Min. Bore Piece Set Includes 3 Boring Bars 10 Inserts 1 Torx Key 1 Storage Box S08H-SWUCR S08H-SWUCR S08H-SWUCR WCMT PEF-DPC25UT T-6 Storage Box 30 Call: Visit: sales@doriantool.com

31 Finger Clamp Dor-Lock Clamp Dor-Lock Clamp Screw Dor-Lock Clamp Spring Negative Lock Pins Positive Lock Pins Finger Clamp Screws Profiling Clamp Pin and Spring B C D E G Thread PKG. CL CL CL CL /16-24 CL / CL CL /4-28 CL /8-24 CL /16-24 DC-5N DCTW-3N DCTW-4N DD-4N DV-3N Dor-Lock Clamp DCS Dor-Lock Clamp Screw DSP Dor-Lock Clamp Spring Insert I.C. Nominal Length Thread Hex Wrench Size Inch NL /16 NL /64 NL-33L /64 NL /64 NL-34L /64 NL /64 NL /4-28 3/32 NL /4-28 3/32 NL-46L /4-28 3/32 NL / /8 NL / /8 NL / /8 NL-58L / /8 NL /8-24 9/64 NL-66L /8-24 9/64 NL /8-24 9/64 NL-68L /8-24 9/64 NL /32 NL /32 Metric S ,5 S ,0 S ,0 S ,5-3,0 P P S ,0 Insert Nominal I.C. Length Hex Wrench Size PL /32 PL /8 PL /64 A B C Thread Size Hex Wrench Size XNS /64 XNS /32 XNS /32 XNS /32 XNS /32 XNS /4-28 1/8 XNS /4-28 1/8 XNS /-28 1/8 XNS / /32 XNS / /32 XNS / /32 XNS /8-24 3/16 PKG PKG. 10 PKG. 10 PKG. SC Clamp Pin 10 M Spring 10 Wedge Lock Clamps / Profiling Clamps PKG. C6016N C8008N Wedge Lock Clamp 10 SKN16R SKN16L Profiling Clamps 10 Wedge Clamp Screws Hex Wrench Length Thread PKG. Size V M V8008N M Bridge Clamps L D H PKG. HC HC HC Hex Wrench Length Thread PKG. Bridge Clamp Screws Size SHC CS /8 10 CS /8 CS /4-28 5/32 Bridge Clamp Screw Clip Length PKG. CLP CLP Lever Locks PKG. LV LV LV LV LV Lever Screws Lever Hex Wrench Size PKG. V LV V LV V LV V LV V LV I.C. Torx Key PKG. Positive Insert Torx Screw TS T-6 TS-103-4M T-20 TS M T-6 TS M T-6 TS M T-8 TS M T-8 TS-3.5-7M T-8 TS M T TS M T-15 TS-4.7-8M T-15 TS-44-3-M T-10 TS-44-4-M T-10 TS M T-20 TS-83-4M T-20 Seat Screw Hex Wrench I.C. PKG. Size TS or.500 T-10 TS or.750 T TS T-25 Hex Wrench Thread PKG. I.C. Size S /64 S /4-28 3/32 S / /8 10 S /8-24 9/64 SM-M M3 2.5 SM-M3-T M3 2.5 SM-M M SM-M M4 2.5 SM-M M6 4.0 Metric V M-3 2,5 B M-5 3,5 10 B M-6 4,0 Torx Keys T T T T T T T T T Call: Visit: sales@doriantool.com 31

32 Triangle Chip breakers Square Chip breakers Positive Square Shim Seats Positive 80 Diamond Shim Seats Positive 55 Diamond Shim Seats Positive 35 Diamond Shim Seats Profiling Shim Seats Positive Triangle Shim Seats Positive Round Shim Seats I.C. Effective Width W T2AC T3AC T3AE T3AG T4AC T4AE T4AG T5AC T5AG T5AJ I.C. Effective Width W S3BC S4BE S6BG PKG. 10 PKG. A T R PKG. Inch SM SM Metric S9012P ,4 3,18 0,8 10 A T R PKG. Metric S8012P ,4 3,18 0,8 10 A T R PKG. Metric S5515P ,4 3,18 0,8 10 A T R PKG. Metric S3516P ,4 3,18 0,8 S ,4 3,18 0,8 A T R PKG. Metric CKN16R ,5 4,76 1,0 10 CKN16L ,5 4,76 1,0 A T R PKG. Inch SM SM SM Metric S6016P ,8 3,18 0,8 10 A T PKG. RS-43P RS-63P RS-83P Negative 80 Diamond Seats Negative 55 Diamond Seats Negative 35 Diamond Seats Negative Square Seats A T R PKG. Inch ICSN ICSN ICSN ICSN ICSN ICSN ICSN JC JC Metric S8009N ,5 3,18 0,8 S8012N ,4 3,18 1,2 S8016N ,6 4,76 1,4 10 S8019N ,0 4,76 1,6 A T R PKG. Inch IDSN IDSN IDSN IDSN IDSN JD Metric S5515N ,8 3,18 1,2 10 A T R PKG. IVSN IVSN IVSN JV A T R PKG. Inch ISSN ISSN ISSN ISSN ISSN ISSN ISSN ISSN ISSN JS JS Metric S9012N ,4 3,8 0,8 10 Negative Round Seats A T PKG. IRSN IRSN IRSN IRSN IRSN Negative 80 Trigon Seats A T R PKG. Negative Triangle Seats Inch IWSN IWSN IWSN IWSN Metric S8008P ,5 3,18 1,0 10 A T R PKG. Inch ITSN ITSN ITSN ITSN ITSN ITSN ITSN ITSN ITSN ITSN ITSN ITSN ITSN JT JT Metric S6016P ,4 3,18 0, Call: Visit: sales@doriantool.com

33 Jet-StreamTM Changing the way metal is cut! Double-Jet DOUBLE-JET COOLANT SYSTEM Turning-Boring-Threading On Target at the Cutting Edge - Performance - Quality - Surface finish - Insert life - Chip control Chip Flush Call: Visit: sales@doriantool.com 33

34 ADCLN R/L Toolholder Style L - 5º end or side cutting lead angle for negative 80º diamond CNM_ inserts CNM_ Seat Dor-Lock Clamp Bottom Port Turning Height Length Gage Insert Seat Screw Clamp Screw Nozzle ADCLNR/L-12-4B JC-432 SM-M4-6 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADCLNR/L-16-4D JC-432 SM-M4-8 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADCLNR/L-20-4D JC-432 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADCLNR/L-20-5D JC-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADCLNR/L-20-6E JC-633 SM-M6 JSLC-HPC6 JSCS-06 JSBPE-M4-039 ADCLNR/L-24-4E JC-432 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADCLNR/L-24-5E JC-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADCLNR/L-24-6E JC-633 SM-M6 JSLC-HPC6 JSCS-06 JSBPE-M4-039 ADDJN R/L Toolholder Style J - 3º side cutting lead angle for negative 55º diamond DNM_ inserts Turning DNM_ Height Length Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADDJNR/L-12-3B IDSN-322 SM-M4-245 JSLC-HPD3 JSCS-04 JSBP-M4-039 ADDJNR/L-12-4B JD-432 SM-M4-6 JSLC-HPD4 JSCS-04 JSBP-M4-039 ADDJNR/L-16-4D JD-432 SM-M4-8 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDJNR/L-20-4D JD-432 SM-S4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDJNR/L-24-4E JD-432 SM-S4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDPNN Toolholder Style P º side cutting lead angle for negative 55º diamond DNM_ inserts Turning DNM_ Neutral Height Length Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADDPNN-12-3B S5511P SM-M3 JSLC-HPD3 JSCS-04 JSBP-M4-039 ADDPNN-12-4B JD-432 SM-M4 JSLC-HPD4 JSCS-04 JSBP-M4-039 ADDPNN-16-3D S5511P SM-M3 JSLC-HPD3 JSCS-04 JSBPE-M4-039 ADDPNN-16-4D JD-432 SM-M4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDPNN-20-4D JD-432 SM-M4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDPNN-24-4E JD-432 SM-M4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADSDNN Toolholder Style D - 45º side cutting lead angle for negative square SNM_ inserts Turning SNM_ Neutral Height Length Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADSDNN-12-4B S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADSDNN-16-4D S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADSDNN-20-4D S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADSDNN-20-5D JS-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADSDNN-24-5E JS-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADSRN R/L Toolholder Style R - 15º side cutting lead angle for negative square SNM_ inserts Turning SNM_ Height Length Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADSRNR/L-12-4B S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADSRNR/L-16-4D S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADSRNR/L-20-5D JS533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADSRNR/L-24-5E JS533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADTENN Toolholder Style E - 30º side cutting lead angle for negative triangle TNM_ inserts Turning TNM_ Neutral Height Length Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADTENN-12-3B JT-322 SM-M3-T JSLC-HPTW3N JSCS-04 JSBP-M4-039 ADTENN-12-4B JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADTENN-16-3D JT-322 SM-M3-T JSLC-HPTW3N JSCS-04 JSBP-M4-039 ADTENN-16-4D JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADTENN-20-4D JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADTENN-24-4E JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M Call: Visit: sales@doriantool.com

35 ADTJN R/L Toolholder Style J - 3º side cutting lead angle for negative triangle TNM_ inserts Turning TNM_ Height Length Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADTJNR/L-12-3B JT-322 SM-M3-T JSLC-HPTW3N JSCS-04 JSBP-M4-039 ADTJNR/L-12-4B JT-433 SM-M4-8 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADTJNR/L-16-3D JT-322 SM-M3-T JSLC-HPTW3N JSCS-04 JSBP-M4-039 ADTJNR/L-16-4D JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADTJNR/L-20-4D JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADTJNR/L-24-4E JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADVJN R/L Toolholder Style J - Negative 3º side cutting lead angle for negative 35º diamond VNM_ inserts Turning VNM_ Height Length Gage Insert Seat Seat Screw Dor-Lock Clamp ADVJNR/L-12-3B JV-322 SM-M3 JSLC-HPV3 JSCS-04 JSBPE-M4-039 Clamp Screw Nozzle ADVJNR/L-16-3D JV-322 SM-M3 JSLC-HPV3 JSCS-04 JSBPE-M4-039 ADVJNR/L-20-3D JV-322 SM-M3 JSLC-HPV3 JSCS-04 JSBPE-M4-039 ADVJNR/L-24-3E JV-322 SM-M3 JSLC-HPV3 JSCS-04 JSBPE-M4-039 ADWLN R/L Toolholder Style L - Negative 5º end or side cutting lead angle for negative 80º trigon WNM_ inserts Turning WNM_ Height Length Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADWLNR/L-12-3B IWSN-322 SM-M JSLC-HPTW3R/L JSCS-04 JSBP-M4-039 ADWLNR/L-12-4B IWSN-423 SM-M4-6 JSLC-HPTW4R/L JSCS-04 JSBP-M4-039 ADWLNR/L-16-3D IWSN-322 SM-M JSLC-HPTW3R/L JSCS-04 JSBP-M4-039 ADWLNR/L-16-4D IWSN-433 SM-M4-8 JSLC-HPTW4R/L JSCS-04 JSBP-M4-039 ADWLNR/L-20-4D IWSN-423 SM-M4-8 JSLC-HPTW4R/L JSCS-04 JSBP-M4-039 ADWLNR/L-24-4E IWSN-423 SM-M4-8 JSLC-HPTW4R/L JSCS-04 JSBPE-M4-039 AS-ADCLN R/L Boring Bar Style L - Negative 5º side & end cutting lead angle for negative 80º diamond CNM_ inserts Min. Bore Bar CNM_ Seat Dor-Lock Clamp Chip Flush Boring B Size Gage Insert Seat Screw Clamp Screw Plug AS-12R-ADCLNR/L N/A N/A JSLC-HPC3-B JSCS-03 JSPN-M3 AS-16R-ADCLNR/L DC-432 TS M1 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-20S-ADCLNR/L DC-432 TS M1 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-24S-ADCLNR/L DC-432 TS M1 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-32T-ADCLNR/L DC-432 TS M1 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-32T-ADCLNR/L JC-533 SM-M6 JSLC-HPC5 JSCS-04 JSPN-M6 AS-ADTUN R/L Boring Bar Style U - Negative 3º end cutting lead angle for negative triangle TNM_ inserts Boring Min. Bore B Bar Size TNM_ Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip Flush Plug AS-12R-ADTUNR/L N/A N/A JSLC-HPDT3-BR/L JSCS-03 JSPN-M3 AS-16R-ADTUNR/L JT-322 SM-M3-T JSLC-HPDT3-BR/L JSCS-03 JSPN-M3 AS-20S-ADTUNR/L JT-433 SM-S4 JSLC-HPTW4R/L JSCS-04 JSPN-M6 AS-24S-ADTUNR/L JT-433 SM-S4 JSLC-HPTW4R/L JSCS-04 JSPN-M6 AS-32T-ADTUNR/L JT-433 SM-S4 JSLC-HPTW4R/L JSCS-04 JSPN-M6 AS-ADDUN R/L Boring Bar Style U - Negative 3º end cutting lead angle for negative 55º diamond DNM _inserts Boring Min. Bore B Bar Size DNM_ Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip Flush Plug AS-16R-ADDUNR/L P SM-M3 JSLC-HPDT3-BR/L JSCS-03 JSPN-M3 AS-20S-ADDUNR/L DD-432 TS M1 JSLC-HPD4 JSCS-04 JSPN-M6 AS-24S-ADDUNR/L DD-432 TS M1 JSLC-HPD4 JSCS-04 JSPN-M6 AS-32T-ADDUNR/L DD-432 TS M1 JSLC-HPD4 JSCS-04 JSPN-M6 AS-ADDPN R/L Boring Bar Style P- Negative 27.5 end cutting lead angle for negative 55º diamond DNM_ inserts Boring Min. Bore B Bar Size DNM_ Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip Flush Plug AS-20S-ADDPNR/L DD-432 TS M1 JSLC-HPD4 JSCS-04 JSPN-M6 AS-24S-ADDPNR/L DD-432 TS M1 JSLC-HPD4 JSCS-04 JSPN-M6 Call: Visit: sales@doriantool.com 35

36 AS-ADSKN R/L Boring Bar Style K - 15º End cutting lead angle for negative square SNM_ inserts Boring Min. Bore B Bar Size SNM_ Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip Flush Plug AS-20S-ADSKNR/L S9012P SM-S4 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-24S-ADSKNR/L S9012P SM-S4 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-32T-ADSKNR/L S9012P SM-S4 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-32T-ADSKNR/L JS-533 SM-M6 JSLC-HPC5 JSCS-04 JSPN-M6 AS-ADVUN R/L Boring Bar Style U - Negative 3º side cutting lead angle for negative 35º diamond VNM_ inserts Boring Min. Bore B Bar Size VNM_ Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip Flush Plug AS-20S-ADVUNR/L S3516P SM-M3 JSLC-HPV3 JSCS-04 JSPN-M6 AS-24S-ADVUNR/L S3516P SM-M3 JSLC-HPV3 JSCS-04 JSPN-M6 AS-ADWLN R/L Boring Bar Style L - Negative 5º end & side cutting lead angle for negative 80º trigon WNM_ inserts Boring Min. Bore B Bar Size WNM_ Gage Insert Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip Flush Plug AS-12R-ADWLNR/L N/A N/A JSLC-HPW3-B JSCS-03 JSPN-M3 AS-16R-ADWLNR/L IWSN-423 SM-S4 JSLC-HPTW-4R/L JSCS-04 JSPN-M6 AS-20S-ADWLNR/L IWSN-423 SM-S4 JSLC-HPTW-4R/L JSCS-04 JSPN-M6 AS-24S-ADWLNR/L IWSN-423 SM-S4 JSLC-HPTW-4R/L JSCS-04 JSPN-M6 AS-32T-ADWLNR/L IWSN-423 SM-S4 JSLC-HPTW-4R/L JSCS-04 JSPN-M6 ADTVO R Toolholder Style V - O.D. On Edge Threading and shallow grooving for triangle TNMC inserts Boring TNMC Height Length Gage Insert ADTVOR12-3B ADTVOR16-3D ADTVOR12-4B Insert Torx Screw Torx Key 322 GTS-1M T-10 ADTVOR16-4D GTS-2 T-20 ADTVOR20-4D ADTVOR/L20-5D GTS-3 T-20 AS-ADTHO R/L Threading Bar Style H - I.D. On Edge Threading and shallow grooving for triangle TNMC inserts Threading Min. Bore B Bar Size TNMC Gage Insert Insert Torx Screw Torx Key Chip Flush Plug AS-16R-ADTHOR/L GTS-1M T-10 JSPN-M6 AS-20S-ADTHOR/L AS-32T-ADTHOR/L GTS-2 T-20 JSPN-M6 ADNS R/L Toolholder Style S - External DorNotch toolholder for threading and grooving DorNotch inserts Threading Gage Height Length Insert ADNSR/L12-3B ADNSR/L16-3D ADNSR-L20-3D NG-3R NG-3L Seat N/A Seat Screw N/A Dor-Lock Clamp JSLC-HP72 JSLC-HP73 Clamp Screw JSCS-04 ADNSR/L16-4D ADNSR/L20-4D ADNSR/L24-4E NG-4R NG-4L SM-420 SL-344 JSLC-HP76 JSLC-HP77 JSCS Call: Visit: sales@doriantool.com

37 ADNE R/L Toolholder Style E- Gang external DorNotch toolholder for threading and grooving DorNotch inserts Threading Gage Height Length Insert ADNER/L12-3B Dor-Lock Clamp Clamp Screw ADNER/L16-3D NG-3L NG-3R JSLC-HP73 JSLC-HP72 JSCS-04 ADNER/L20-3D ADNER/L16-4D ADNER/L20-4D NG-4L NG-4R JSLC-HP77 JSLC-HP76 JSCS-04 AS-ADNE R/L Threading Bar Style E- Internal DorNotch Bar for threading and grooving DorNotch inserts Threading Height Length Gage Insert Dor-Lock Clamp Clamp Screw Chip Flush Plug AS-16R-ADNER/L AS-20S-ADNER/L NG-3L NG-3R JSLC-HP73 JSLC-HP72 JSCS-04 JSPN-M6 AS-24S-ADNER/L AS-32T-ADNER/L NG-4L NG-4R JSLC-HP73 JSLC-HP72 JSCS-08 JSPN-M6 ADLE R/L Toolholder Style E- Laydown toolholder for Laydown inserts Threading Gage Height Length Insert Seat Insert Screw Dor-Lock Clamp Clamp Screw Nozzle ADLER/L12-16C G60 GXE/I-16 TS M1 JSCS-03 N/A JSLC-HP16R-N JSLC-HP16L-N ADLER/L16-16D G60 GXE/I-16 TS M1 JSCS-03 JSBPE-M4-039 ADLE R/L Qualified Toolholder Style E - Offset head for Laydown inserts Threading Gage Insert Dor-Lock Clamp Height Length Insert Seat Screw Clamp Screw Nozzle ADLER/L12-16Q-C G60 GXE/I-16 TS M1 JSLC-HP16R-N JSCS-03 N/A ADLER/L16-16Q-D G60 GXE/I-16 TS M1 JSLC-HP16L-N JSCS-03 JSBPE-M4-039 ADLER/L16-22Q-D ADLER/L20-22Q-E N60 NXE/I-16 TS M1 JSLC-HP22N JSCS-04 JSBPE-M4-039 AS-ADLN R/L Threading Bar Style N - Internal Laydown bar for Laydown threading Threading Min. Bore Bar B Size AS-12R-ADLNR/L AS-16R-ADLNR/L AS-20S-ADLNR/L AS-24S-ADLNR/L AS-24S-ADLNR/L AS-32T-ADLNR/L Gage Insert Seat Insert Screw Dor-Lock Clamp 16-G60 GXE/I-16 TS M1 JSLC-HP16R-N JSLC-HP16L-N Clamp Screw JSCS-03 Chip Flush Plug JSPN-M3 22-N60 GXE/I-16 TS M1 JSLC-HP22N JSCS-04 JSPN-M6 AS-ADLN R/L API Threading Bar Style N- Internal Laydown API Laydown toolholder for API Laydown inserts Threading Min. Bore B D Gage Insert Seat Insert Screw Dor-Lock Clamp Clamp Screw Chip Flush Plug AS-32T-ADLNR/L-22API N60 NXE/I-22 TS M1 JSLC-HP22N JSCS-04 JSPN-M6 Call: Visit: sales@doriantool.com 37

38 2 Standard Pressure Coolant Connection 3 Pcs. Kit 1 Working Pressure 3 up to 400 psi (30 bar) Part # Bar PSI Item JSPLPCK /16 NPT Standard Pressure Quick Release Coolant 3 pcs Kit JS-T /4 OD, 30cm Long Standard Pressure Tubing 2 JS-MC /16 NPT-1/4 Bore, Straight Std Pressure Quick Release Connector 3 JS-MC /8 NPT-1/4 Bore, Straight Std Pressure Quick Release Connector Item JSPLPCK /8 NPT Standard Pressure Quick Release Coolant 3 pcs Kit JS-T /4" OD, 30cm Long Standard Pressure Tubing 2 JS-MC /8" NPT-1/4" Bore, Straight Std Pressure Quick Release Connector 3 JS-MC /8" NPT-1/4" Bore, Straight Std Pressure Quick Release Connector Item JSPLPCK /4" NPT Standard Pressure Quick Release Coolant 3 pcs Kit JS-T /4" OD, 30cm Long Standard Pressure Tubing 2 JS-MC /8" NPT-1/4" Bore, Straight Std Pressure Quick Release Connector 3 JS-MC /4" NPT-1/4" Bore, Straight Std Pressure Quick Release Connector High Pressure Coolant Connection 5 Pcs. Kit Working Pressure over 400 psi (30 bar) Part # Bar PSI Item DT-1/8 HP-QRCK /8" NPT High Pressure Quick Release Coolant 5 pcs Kit DT-HPTU-8X mm High Pressure Coolant Tubing 2 DT-HPC0-6X High Pressure Quick Release Straight Intake 3 DT-HPC0-6X High Pressure Quick Release Straight Intake 4 DT-HP0SC-1/8X /8" NPT Straight High Pressure Quick Release Connector 5 DT-HP90C-1/8X /8" NPT 90 Elbow High Pressure Quick Release Connector Item DT-1/4 HP-QRCK /4 NPT High Pressure Quick Release Coolant 5 pcs Kit DT-HPTU-8X mm High Pressure Coolant Tubing 2 DT-HPC0-6X High Pressure Quick Release Straight Intake 3 DT-HPC0-6X High Pressure Quick Release Straight Intake 4 DT-HP0SC-1/4X /4" NPT Straight High Pressure Quick Release Connector 5 DT-HP90C-1/8X /8" NPT 90 Elbow High Pressure Quick Release Connector Part # Item DT-HP-PLIERS High Pressure Disconnecting Pliers To Disconnect the Coolant Hose Follow 2 Safe & Easy Steps: 1. Place the thinner section of the wrench-nose between the coolant hose and the connector. 2. Close the wrench and it will disconnect Notch 1 of the coolant hose. Use the thicker section of the wrench-nose and close again to disconnect Notch 2. Ball-Type Coolant Nozzles Sold Separately Acetal Material Brass Material Ball-Type Coolant Acetal (Hard Plastic) Material Brass Material Nozzles Size 12mm OD, 1/8NPT ID JSCNA JSCNB mm OD, 1/8NPT ID JSCNA JSCNB mm OD, 1/8NPT ID JSCNA JSCNB mm OD, 1/8NPT ID JSCNA JSCNB /2" OD, 1/8NPT ID JSCNA JSCNB /8" OD, 1/8NPT ID JSCNA JSCNB Note: For machines that have turrets with 1/8 NPT tapped coolant holes, you do not need a ball type coolant nozzle. Ball type coolant nozzles are sold separately. 38 Call: Visit: sales@doriantool.com

39 Jet-Stream TM Thru Coolant System Spare Parts Image Image Image Dor-Lock Clamps for Laydown Threading holders 60 PARTIAL PROFILE INSERT STYLE JSLC-HP16R-N JSLC-HP16L-N JSLC-HP22N JSLC-HP27N Jet-Stream Shim Seats 80 DIAMOND JC JC JC Jet-Stream Clamp Screws CLAMP SCREWS JSCS JSCS JSCS JSCS-04-HPV Includes upper and lower o-rings Dor-Lock Clamps for DorNotch Threading holders NT & NTP 60 INSERT STYLE Includes upper and lower o-rings JSLC-HP JSLC-HP JSLC-HP JSLC-HP Dor-Lock Clamps for CNMG & SNMG holders CNMG & SNMG INSERT STYLES Includes upper and lower o-rings JSLC-HPC3-B JSLC-HPCTW-4N JSLC-HPC JSLC-HPC Dor-Lock Clamps for DNMG & TNMG holders DNMG INSERT STYLES JSLC-HPD JSLC-HPD DIAMOND JD IDSN DIAMOND IDSN JV SQUARE JS JS ISSN TRIANGLE JT JT Jet-Stream Clamp O-Ring Seals UPPER O RINGS JSOR JSOR LOWER O RINGS JSOR Jet-Stream Flush Nozzle/Plug BORING BAR CHIP FLUSH PLUG Torx Keys JSOR JSOR JSOR JSOR JSPN-M JSPN-M JSFN-M TNMG INSERT STYLES JSLC-HPDT3-BR JSLC-HPDT3-BL TRIGON IWSN IWSN IWSN TORX KEYS T T Includes upper and lower o-rings LAYDOWN SHIM SEAT GXE/I NXE/I VXE/I Jet-Stream Clamp Alignment Pin ALIGNMENT PIN JSCAP Dor-Lock Clamps for TNMG & WNMG holders TNMG & WNMG INSERT STYLES Includes upper and lower o-rings Dor-Lock Clamps for VNMG holders VNMG INSERT STYLE Includes upper and lower o-rings JSLC-HPTW3N JSLC-HPTW3R JSLC-HPTW3L JSLC-HPCTW-4N JSLC-HPTW4R JSLC-HPTW4L JSLC-HPW3-B JSLC-HPV NEW High Volume Turning Dor-Lock Clamp CNMG / TNMG / WNMG INSERT STYLES JSLC-HPCTW-4N-HPV DORNOTCH SHIM SEAT Insert Torx Screws/ Shim Screws INSERT SCREWS SHIM SCREWS SM GTS-1M GTS GTS TS M TS M TS M TS M SL SM-M SM-M3-T SM-M SM-M SM-S SM-M SM-M SM-M SM-M Jet-Stream Underport Nozzle Underport Nozzle JSBP-M JSB PE-M Jet-Stream Underport Seal UNDERPORT SEAL JSBPS-M Includes upper and lower o-rings Call: Visit: sales@doriantool.com 39

40 CARBIDE BORING BARS Thru Coolant - High Performance Ultimate rigidity Minimize vibrations Heavy duty roughing Very fine finishing Better surface finish 6xD Boring Ratio (8xD for softer materials) Superior surface finish compared to steel boring bars All Thru Coolant Bars (Negative Insert boring bars are Jet-Stream) 1/2 and above sizes have threaded ends for coolant connector 40 Call: Visit: sales@doriantool.com

41 E_SCLD R/L Thru Coolant Integral Carbide Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for 15 positive 80 diamond CD inserts Bar Boring Ratio CD Gage Insert Min. Dia. Bore Length E02.5H-SCLDR/L E03.0H-SCLDR/L E03.5H-SCLDR/L : E04H-SCLDR/L E05K-SCLDR/L Inserts used: all CD series (CDGX, CDMT, CDGW, CDGB). E_SCLC R/L Thru Coolant Integral Carbide Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for 7 positive 80 diamond CC inserts CC Bar Boring Min. Gage Ratio Dia. Bore Length Insert E06M-SCLCR/L E08K-SCLCR/L E08R-SCLCR/L E10M-SCLCR/L E10S-SCLCR/L E08K-SCLCR/L E08R-SCLCR/L :1 E10M-SCLCR/L E10S-SCLCR/L E12Q-SCLCR/L E12S-SCLCR/L E16R-SCLCR/L E16T-SCLCR/L E20U-SCLCR/L Inserts used: all CC series (CCGX, CCGT, CCMT, CCGW). E_SCLP R/L Thru Coolant Integral Carbide Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for 11 positive 80 diamond CP inserts CP Bar Boring Min. Gage Ratio Dia. Bore Length Insert E05K-SCLPR/L E06M-SCLPR/L E08K-SCLPR/L E08R-SCLPR/L E10M-SCLPR/L :1 E10S-SCLPR/L E08K-SCLPR/L E08R-SCLPR/L E10M-SCLPR/L E10S-SCLPR/L Inserts used: all CP series (CPGX, CPGT, CPGW, CPMT). E_SDNC R/L Thru Coolant Integral Carbide Boring Bar Style N - Negative 27.5 End & Side Cutting Edge Angle for 7 positive 55 diamond DC inserts DC Bar Boring Min. Gage Ratio Dia. Bore Length Insert E06M-SDNCR/L E08K-SDNCR/L E08R-SDNCR/L : E10M-SDNCR/L E10S-SDNCR/L Inserts used: all DC series (DCMT, DCGW, DCMT, DCGX, DCGT). E_SDQC R/L Thru Coolant Integral Carbide Boring Bar Style Q - Negative 17.5 End Cutting Edge Angle for 7 positive 55 diamond DC inserts Bar DC Boring Min. Gage Ratio Dia. Bore Length Insert E06M-SDQCR/L E08K-SDQCR/L E08R-SDQCR/L : E10M-SDQCR/L E10S-SDQCR/L Inserts used: all DC series (DCMT, DCGW, DCMT, DCGX, DCGT). E_SDUC R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive 55 diamond DC inserts DC Bar Boring Min. Gage Ratio Dia. Bore Length Insert E06M-SDUCR/L E08K-SDUCR/L E08R-SDUCR/L E10M-SDUCR/L E10S-SDUCR/L :1 E12Q-SDUCR/L E12S-SDUCR/L E16R-SDUCR/L E16T-SDUCR/L E20U-SDUCR/L Inserts used: all DC series (DCMT, DCGW, DCMT, DCGX, DCGT). E_SDXC R/L Thru Coolant Integral Carbide Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 7 positive 55 diamond DC inserts DC Bar Boring Min. Gage Ratio Dia. Bore Length Insert E06M-SDXCR/L E08K-SDXCR/L E08R-SDXCR/L E10M-SDXCR/L E10S-SDXCR/L :1 E12Q-SDXCR/L E12S-SDXCR/L E16R-SDXCR/L E16T-SDXCR/L E20U-SDXCR/L Inserts used: all DC series (DCMT, DCGW, DCMT, DCGX, DCGT). E_STUC R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive triangle TC inserts TC Bar Boring Min. Gage Ratio Dia. Bore Length Insert E04H-STUCR/L E05K-STUCR/L E06M-STUCR/L E06M-STUCR/L E08K-STUCR/L E08R-STUCR/L E10M-STUCR/L : E10S-STUCR/L E12Q-STUCR/L E12S-STUCR/L E16R-STUCR/L E16T-STUCR/L E20U-STUCR/L Inserts used: all TC series (TCMT, TCGW, TCGT, TCGX). E_STUP R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 11 positive triangle TP inserts Bar E06M-STUPR/L Boring Ratio Min. Dia. Bore Length E08K-STUPR/L E08R-STUPR/L : E10M-STUPR/L E10S-STUPR/L Inserts used: all TP series (TPMT, TPGT, TPMR, TPGW, TPGH, TPGB, TPHT). TP Gage Insert Call: Visit: sales@doriantool.com 41

42 E_SVMC R/L Thru Coolant Integral Carbide Boring Bar Style M - Negative 50 Side Cutting Edge Angle for 7 positive 35 diamond VC inserts VC Bar Boring Min. Gage Ratio Dia. Bore Length Insert E08K-SVMCR/L E08R-SVMCR/L :1 221 E10M-SVMCR/L E10S-SVMCR/L Inserts used: all VC series (VCMT, VCGT, VCGW, VCGX). E_SVQC R/L Thru Coolant Integral Carbide Boring Bar Style Q - Negative 17.5 End Cutting Edge Angle for 7 positive 35 diamond VC inserts Bar Boring Ratio Min. Dia. Bore Length E10M-SVQCR/L :1 E10S-SVQCR/L Inserts used: all VC series (VCMT, VCGT, VCGW, VCGX) VC Gage Insert E_SVUC R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive 35 diamond VC inserts Bar Boring Ratio Min. Dia. Bore Length E10M-SVUCR/L :1 E10S-SVUCR/L Inserts used: all VC series (VCMT, VCGT, VCGW, VCGX). 221 VC Gage Insert E_SVXC R/L Thru Coolant Integral Carbide Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 7 positive 35 diamond VC inserts Bar Boring Min. Ratio Dia. Bore Length E10M-SVXCR/L :1 E10S-SVXCR/L Inserts used: all VC series (VCMT, VCGT, VCGW, VCGX). 221 VC Gage Insert E_SVQP R/L Thru Coolant Integral Carbide Boring Bar Style Q - Negative 17.5 End Cutting Edge Angle for 11 positive 35 diamond VP inserts Inserts used: all VP series (VPMT, VPGT). Bar Boring Min. Ratio Dia. Bore Length E10M-SVQPR/L :1 E10S-SVQPR/L VP Gage Insert E_SVUP R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 11 positive 35 diamond VP inserts Bar Boring Min. Ratio Dia. Bore Length E10M-SVUPR/L :1 E10S-SVUPR/L Inserts used: all VP series (VPMT, VPGT). 221 VP Gage Insert 221 E_SWLC R/L Thru Coolant Integral Carbide Boring Bar Style L - Negative 5 End Cutting Edge Angle for 7 positive 80 trigon WC inserts WC Bar Boring Min. Gage Ratio Dia. Bore Length Insert E03.0H-SWLCR/L E03.5H-SWLCR/L E04H-SWLCR/L E05K-SWLCR/L E06M-SWLCR/L E08K-SWLCR/L E08R-SWLCR/L E10M-SWLCR/L E10S-SWLCR/L :1 E08K-SWLCR/L E08R-SWLCR/L E10M-SWLCR/L E10S-SWLCR/L E12Q-SWLCR/L E12S-SWLCR/L E16R-SWLCR/L E16T-SWLCR/L E20U-SWLCR/L Inserts used: all WC series (WCMT, WCGT). E_SN R/L Thru Coolant Integral Carbide Threading Bar Internal Laydown Bar for Laydown Inserts Laydown Bar Threading Min. Gage Ratio Dia. Bore Length Insert E03.5H-SNR/L A60 E04H-SNR/L E05K-SNR/L A60 E06M-SNR/L-H :1 E08K-SNR/L-H A60 E08R-SNR/L-H E10M-SNR/L-H A60 E10S-SNR/L-H * 8 x Dia. Boring Ratio can be achieved under favorable conditions. E_NE R/L Thru Coolant Integral Carbide Threading & Grooving Bar Style E- Internal DorNotch Bar for threading and grooving DorNotch inserts Threading Bar E08K-NER/L Threading Ratio Min. Dia. Bore Length E08R-NER/L E10M-NER/L :1 E10S-NER/L E12Q-NER/L Grooving E12S-NER/L * For right hand tool. ** For left hand tool DorNotch Gage Insert *NG-2L **NG-2R *NG-2L **NG-2R *NG-2L **NG-2R E_SVXP R/L Thru Coolant Integral Carbide Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 11 positive 35 diamond VP inserts Bar Boring Min. Ratio Dia. Bore Length E10M-SVXPR/L :1 E10S-SVXPR/L Inserts used: all VP series (VPMT, VPGT). VP Gage Insert Call: Visit: sales@doriantool.com

43 E_ADCLN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style L - Negative 5º side & end cutting lead angle for negative 80º diamond CN inserts Bar E16R-ADCLNR/L Boring Ratio Dia. Min. Bore Length E16T-ADCLNR/L : E20U-ADCLNR/L Inserts used: all CN series (CNMG, CNGG, CNMX, CNMM, CNMA). CN Gage Insert 432 E-ADNE R/L Thru Coolant Jet-Stream Carbide Threading Bar Style E- For DorNotch Threading Inserts Bar E16R-ADNER/L Threading Ratio Dia. Min. Bore Length E16T-ADNER/L : DorNotch Gage Insert NG-3L* NG-3R** E_ADDUN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style U Negative 3º end cutting lead angle for negative 55º diamond DN inserts Bar E16R-ADDUNR/L Boring Ratio Min. Dia. Bore Length E16T-ADDUNR/L : DN Gage Insert E20U-ADDUNR/L Inserts used: all DN series (DNMG, DNMG, DNMX, DNMA, DNGG). E_ADTUN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style U - Negative 3º end cutting lead angle for negative triangle TN inserts Bar E16R-ADTUNR/L Boring Ratio Min. Dia. Bore Length E16T-ADTUNR/L : E20U-ADTUNR/L Inserts used: all TN series (TNMG, TNMC, TNMX, TNMA). 332 TN Gage Insert 332 E20U-ADNER/L * For right hand holder ** For left hand holder E-ADLN R/L Thru Coolant Jet-Stream Carbide Threading Bar Style N- for LayDown Threading Inserts Bar E12Q-ADLNR/L Threading Ratio Dia. LayDown Min. Gage Bore Length Insert E12S-ADLNR/L E16R-ADLNR/L :1 E16T-ADLNR/L E20U-ADLNR/L G60 E20U-ADLNR/L N60 * For right hand bar ** For left hand bar E_ADDPN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style P- Negative 27.5º end cutting lead angle for negative 55º diamond DN inserts Bar E16R-ADDPNR/L Boring Ratio Min. Dia. Bore Length E16T-ADDPNR/L : DN Gage Insert E20U-ADDPNR/L Inserts used: all DN series (DNMG, DNMG, DNMX, DNMA, DNGG). 332 E_ADVUN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style U - Negative 3º side cutting lead angle for negative 35º diamond VN inserts Bar Boring Ratio Dia. Min. Bore Length VN Gage Insert E20U-ADVUNR/L : Inserts used: all VN series (VNMG). E_ADWLN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style L - Negative 5º end & side cutting lead angle for negative 80º trigon WN inserts Bar E16R-ADWLNR/L Boring Ratio Dia. Min. Bore Length WN Gage Insert E16T-ADWLNR/L : Inserts used: all WN series (WNMG, WNMA). E20U-ADWLNR/L Call: Visit: sales@doriantool.com 43

44 High Performance Quick Change Carbide Boring Bars Body & Boring Heads for Multi Boring and Threading Operation 1 SCLC R/L Quick Change Boring Bar Head With Thru Coolant 2 SDNC R/L Quick Change Boring Bar Head With Thru Coolant 3 SDQC R/L Quick Change Boring Bar Head With Thru Coolant 4 SDUC R/L Quick Change Boring Bar Head With Thru Coolant 9 Interchangeable Heads 5 SDXC R/L Quick Change Boring Bar Head With Thru Coolant 6 STUC R/L Quick Change Boring Bar Head With Thru Coolant One Quick Change Carbide Body 7 SVUC R/L Quick Change Boring Bar Head With Thru Coolant Note: Quick Change Boring Heads will fit the Quick Change Carbide Boring Bar Body, and the Solution Tool Quick Change Boring Bar Body. 8 SWLC R/L Quick Change Boring Bar Head With Thru Coolant 9 SN R/L Quick Change Threading Bar Head With Thru Coolant 44 Call: Visit: sales@doriantool.com

45 Thru Coolant Quick Change Carbide Boring Bar Body C1 1/8 NPT D C3 L (Max. Depth of Bore / Boring Ratio) C C2 (Holding Area) Boring Bar Center Line H F1 Boring Head Center Line Bar Neutral Boring Ratio Construction Bar Dia. Actual Min. Bore B F1 H L C C1 C2 C3 Modular Head CBBB AE12I-Q-QCCBB x Dia. Carbide Body AE16I-R-QCCBB AE12I-S-QCCBB F + H + (1/2 Bar Dia) Note: Leave enough F1=F+H AE16I-T-QCCBB x Dia. Carbide Body room for chip evacuation DBOMH-12/20M DBOMH-12/20M AE20I-U-QCCBB x Dia. Boring Ratio can be achieved under favorable conditions. For Quick Change Heads, see pages 53 and 54 Call: Visit: sales@doriantool.com 45

46 Solution Tool! TM Makes Deep Hole Boring Simple! Solution Tool! THE NO! VIBRATION RE-TUNABLE BORING BAR Makes Deep Hole Boring Simple! 46 Call: Visit:

47 Solution Tool! The No! Vibration Re-Tunable Threading & Boring Bar OUTPERFORMS THE BEST To maximize performance in deep boring operations, Solution Tool! is offered in 2 versions: Steel Body: The steel body for boring depth up to 12 x Boring Bar Diameter Carbide Body: The carbide body rigidity and stability, allows to bore at higher cutting rate and material removal, and longer depth of cut up to 14xD. Waveength Frequency Chart of Solution Tool! Tuned Boring Bar Sec. Time Boring Bar TUNED - TESTED - CERTIFIED Ready to Operate Re-tunable Key When to Re-tune the Bar? Re-tune to optimize the Bar performance How The Solution Tool! The NO! Vibration Re-Tunable Boring Bar Works? The Solution Tool! is dynamically tuned, tested and certified to meet Dorian Tool Quality control standards and performance and ready to be used. Re-Tuning The Solution Tool! Can be re-tuned on the machine to optimize the boring bar performance when: Extreme and exotic materials change from very soft to very hard. Thin wall parts Changing the boring depth. Ex: a boring bar with a 12 x Dia. Boring Ratio will be used for a shorter boring Ratio like 6 x Dia.. Improving performance for specific machining operations such as finishing, roughing boring, threading, and grooving. Call: Visit: sales@doriantool.com 47

48 Solution Tool! The No! Vibration Re-Tunable Boring Bar BEST Split Collar Holding System Boring Bar Holding System Locks the boring bar at 360º on the diameter, assuring the most rigid and precise boring bar positioning Without scarring or damaging the bar surface. GOOD Split Bushing Holding System With a solid boring bar holder The split bushing embraces the boring bar at 360º on the diameter. The boring bar holder screws will squeeze the bushing around the boring bar Without scarring or damaging the bar surface with precise positioning. 100% Rigidity! 80% Rigidity! 360º Locking Force 4 x Dia. Holding Area Vertical Locking Force Locking Screw Split Collar Boring Bar Holder Locking Screw DO NOT USE IT Set Screw Lock Holding System Solid boring bar holder Without bushing Never lock the screws directly on the boring bar. Locking a screw over the boring bar will create only one point of contact causing very poor rigidity. Additionally, the screw will damage the boring bar surface and make positioning difficult. STOP! Do not Use it Split Bushing 4 x Dia. Holding Area 4 x Dia. Holding Area Split Bushing Solid Boring Bar Holder Locking Screw Set Screw Lock Solid Boring Bar Holder Insert Center Line Set-Up Due to the cutting pressure placed on the insert during deep boring, the bar flexes downward. Place the insert cutting edge above the center line by 10% of bar diameter to compensate bar deflection and to reduce vibration. Example: 1 inch bar 1% =.010 z Important Recommendations For a Roughing operation with a large depth of cut and a high feed rate, low RPM is recommended. For a Finishing operation with a small depth of cut and a low feed rate, high RPM is recommended. Minimum depth of cut is 1/2 of the insert radius. Maximum feed rate is 1/2 of the insert radius. When wrong cutting parameters are used for the specific material to be bored, and for the operation to be executed, the boring bar will not perform properly, generating poor surface finish and/ or vibration. Maximum Boring & Threading Ratio for Steel, Carbide and Solution Tool! Boring Bars Steel Bars 4 x Dia. Boring Ratio 2 x Dia. Threading & Grooving Ratio General boring bar applications Roughing to Finishing 4 x Dia. Boring Ratio 2 x Dia. Threading Ratio 4 x Dia. Holding Area Split Boring Bar Holder Carbide Bars 6 x Dia. Boring Ratio 3 x Dia. Threading & Grooving Ratio Best for boring small holes Rigid for close tolerances and good surface finish Rigid for heavy material removal at high depth of cut and feed rate. 6 x Dia. Boring Ratio 3 x Dia. Threading Ratio 4 x Dia. Holding Area Split Boring Bar Holder Solution Tool! (Steel Body) 6 x Dia., 8 x Dia., 10 x Dia., 12 x Dia. Boring Ratio 4 x Dia. Threading & Grooving Ratio For deep hole boring applications 6, 8, 10 & 12 x Dia. Boring Ratio 4 x Dia. Threading Ratio 4 x Dia. Holding Area Split Boring Bar Holder Solution Tool! (Carbide Body) 8 x Dia., 10 x Dia., 12 x Dia., 14 x Dia. Boring Ratio 5 x Dia. Threading & Grooving Ratio High performance deep hole boring applications for higher material removal rate. 8, 10, 12 & 14 x Dia. Boring Ratio 5 x Dia. Threading Ratio 4 x Dia. Holding Area Split Boring Bar Holder 48 Call: Visit: sales@doriantool.com

49 For Threading & Heavy Duty Boring Integral Threading & Boring 1/2 X 6D 5/8 X 6D Quick Change Threading & Boring 3/4 X 6D 1 X 6D 1 1/4 X 6D Modular Jet-Stream Threading & Boring 1 1/2 X 6D 2 X 6D 2 1/2 X 6D 3 X 6D 4 X 6D Will fit all the Quick Change Boring Heads on page Will fit all the Modular Boring Heads on page Call: Visit: sales@doriantool.com 49

50 Solution Tool! The No! Vibration Re-Tunable Integral Threading & Heavy Duty Boring Bar NEW 4-6 x Dia. Boring Bar Center Line F L (Depth of Bore / Boring & Threading Range) C C2 (Holding Area) Boring & Threading Holding Bar Dia. Actual Min. Bore Bar R.H. L.H. Ratio Ratio Construction D B F L C C1 C2 C3 C4 Gage Insert Insert Screw STI08X-06-ITBNR/L06-11-CB A60 TS M2 4-6 x Dia. 2-4 Carbide Body STI10X-06-ITBNR/L CB G60 TS M1 D Not thru coolant Solution Tool! The No! Vibration Re-Tunable Quick Change Threading & Heavy Duty Boring Bar NEW 4-6 x Dia. Boring Bar Center Line F1 Threading Head Center Line F H C3 C4 C C1 L (Depth of Bore / Boring & Threading Range) C2 (Holding Area) 1/8 NPT Boring & Threading Holding Bar Dia. Actual Min. Bore Bar R.H. L.H. Ratio Ratio Construction D B F1 H L C C1 C2 C3 C4 Threading Head STI12X-06-QTB08-SB F + H + (1/2 Bar Dia) Thru coolant D STI16X-06-QTB10-SB x Dia. 2-4 Steel Body Note: F1=F+H Leave enough STI20X-06-QTB13-SB room for chip evacuation DBOMH-12/20M-SNR/L-16 Solution Tool! The No! Vibration Re-Tunable Modular Jet-Stream Threading & Heavy Duty Boring Bar NEW 4-6 x Dia. Boring Bar Center Line F1 Threading Head Center Line F H C3 C1 C4 L (Depth of Bore / Boring & Threading Range) C C2 (Holding Area) Thru coolant 1/2 NPT D Boring & Bar Actual Threading Holding Dia. Min. Bore Bar R.H. Ratio Ratio Construction D B F1 H L C C1 C2 C3 C4 Threading Head STI24X-06-MTB12-SB B= F + H + DBOMH-24/40M-ADLNR/L-16 STI32X-06-MTB16-SB (1/2 Bar Dia) DBOMH-24/40M-ADLNR/L-22 STI40X-06-MTB20-SB x Dia. 2-4 Steel Body Note: F1=F+H DBOMH-24/40M-ADLNR/L-27 Leave enough DBOMH-24/40M-ADNER/L-3 STI48X-06-MTB24-SB room for chip DBOMH-24/40M-ADTHOR/L-4 evacuation STI64X-06-MTB32-SB Call: Visit: sales@doriantool.com

51 Solution Tool! The No! Vibration Re-Tunable Integral Boring Bar Small Diameters 1/2 and 5/8 L ( Max. Depth of Bore / Boring Ratio) C C2 ( Holding Area) D Not thru coolant Deep hole boring made simple 8xD, 10xD, 12xD and 14xD boring (overhang) ratios For high material removal rate, high surface finish and tight tolerances Bars are pre-tuned at the factory to the specific boring ratio Bars can be Re-tuned on the machine to optimize boring performance in challenging application Min Bore (B) in the charts below includes chip clearance. Actual minimum bore = F + (1/2 Bar Dia.) Always allow enough room for chip evacuation. B B B B B B B B B B B B B B B B B B B F 5 3 F 27.5 F 5 F 3 F F 27.5 F F F F F F F F F F F F F 3 5 F 3 5 F 3 Boring Min. Bore Gage Insert Bar Ratio Construction Dia. B C L C2 F CC Insert Screw DVI06X-08-SCLCR-2-CB TS M2 DVI08X-08-SCLCR/L-2-CB x Dia DVI10X-08-SCLCR/L-3-CB SCLC TS-4.7-8M1 DVI06X-10-SCLCR-2-CB DVI08X-10-SCLCR/L-2-CB x Dia TS M2 DVI10X-10-SCLCR/L-3-CB TS-4.7-8M1 Carbide Body DVI06X-12-SCLCR-2-CB TS M2 DVI08X-12-SCLCR/L-2-CB x Dia DVI10X-12-SCLCR/L-3-CB SDUC TS-4.7-8M1 DVI06X-14-SCLCR-2-CB DVI08X-14-SCLCR/L-2-CB x Dia TS M2 DVI10X-14-SCLCR/L-3-CB TS-4.7-8M1 SCLC Boring Min. Bore Bar B Ratio Construction Dia. B C L C2 F DVI06X-08-SDUCR-2-CB SDNC DVI08X-08-SDUCR/L-2-CB x Dia. F SDNC DVI10X-08-SDUCR/L-2-CB DVI06X-10-SDUCR-2-CB DVI08X-10-SDUCR/L-2-CB SDUC x Dia DVI10X-10-SDUCR/L-2-CB Carbide Body DVI06X-12-SDUCR-2-CB DVI08X-12-SDUCR/L-2-CB SCLC x Dia DVI10X-12-SDUCR/L-2-CB SDXC DVI06X-14-SDUCR-2-CB DVI08X-14-SDUCR/L-2-CB x Dia DVI10X-14-SDUCR/L-2-CB B SDNC SDUC SCLC STUC STUC SDNC SDUC SDXC F SDNC Boring Min. Bore Bar B Ratio Construction Dia. B C L C2 F DVI06X-08-SDNCR-2-CB F 27.5 SDXC DVI08X-08-SDNCR-2-CB x Dia DVI10X-08-SDNCR-2-CB DVI06X-10-SDNCR-2-CB DVI08X-10-SDNCR-2-CB SDXC 59104B 10 x Dia SDUC DVI10X-10-SDNCR-2-CB SDNC Carbide Body DVI06X-12-SDNCR-2-CB SCLC F SDNC DVI08X-12-SDNCR-2-CB x Dia DVI10X-12-SDNCR-2-CB DVI06X-14-SDNCR/L-2-CB DVI08X-14-SDNCR-2-CB x Dia DVI10X-14-SDNCR-2-CB B F F SDXC SDNC Boring Min. Bore Bar Ratio Construction5 Dia. B C L C2 F DVI06X-08-SDXCR-2-CB DVI08X-08-SDXCR-2-CB x Dia DVI10X-08-SDXCR/-2-CB DVI06X-10-SDXCR-2-CB B DVI08X-10-SDXCR-2-CB SDXC SDNC x Dia DVI10X-10-SDXCR-2-CB STUC Carbide FBody SDNC SDXC DVI06X-12-SDXCR-2-CB DVI08X-12-SDXCR-2-CB x Dia DVI10X-12-SDXCR-2-CB DVI06X-14-SDXCR-2-CB DVI08X-14-SDXCR-2-CB x Dia DVI10X-14-SDXCR-2-CB STUC SDXC B B F SDXC Boring Min. Bore Bar Ratio Construction Dia. B C L C2 F 5 DVI06X-08-STUCR-2-CB DVI08X-08-STUCR/L-2-CB x Dia DVI10X-08-STUCR/L-2-CB DVM10X-10-STUCR-11-CB B DVI08X-10-STUCR/L-2-CB STUC x Dia. F SDXC DVI10X-10-STUCR/L-2-CB Carbide Body DVI06X-10-STUCR-2-CB DVI08X-12-STUCR/L-2-CB x Dia DVI10X-12-STUCR/L-2-CB DVI06X-14-STUCR-2-CB DVI08X-14-STUCR/L-2-CB x Dia DVI10X-14-STUCR/L-2-CB Gage Insert DC Insert Screw TS M TS M TS M TS M2 Gage Insert DC Insert Screw TS M TS M TS M TS M2 Gage Insert DC Insert Screw TS M TS M TS M TS M2 Gage Insert TC Insert Screw TS M TS M TS M TS M2 Call: Visit: sales@doriantool.com 51

52 Solution Tool! The No! Vibration Re-Tunable Quick Change Boring Bar Medium Diameters 3/4, 1 and 1 1/4. C1 Thru coolant 1/8 NPT D C3 C4 L ( Max. Depth of Bore / Boring Ratio) C C2 (Holding Area) Deep hole boring made simple 8xD, 10xD, 12xD and 14xD boring (overhang) ratios For high material removal rate, high surface finish and tight tolerances Bars are pre-tuned at the factory to the specific boring ratio Bars can be Re-tuned on the machine to optimize boring performance in challenging application Boring Bar Center Line F1 F H Boring Head Center Line Bar Neutral Boring Ratio Holding Ratio Construction Bar Dia. D Actual Min. Bore B F1 H L C C1 C2 C3 C4 Quick Change Head Coolant Attachment Thread DVI12X-08-MQBBN-9-SB Steel Body DVI12X-08-MQBBN-9-CB Carbide Body B= F + H (1/2 Bar Dia) DVI16X-08-MQBBN-12-SB Steel Body x Dia. 4 Note: F1=F+H DVI16X-08-MQBBN-12-CB Carbide Body Leave enough room for chip DVI20X-08-MQBBN-15-SB Steel Body evacuation DVI20X-08-MQBBN-15-CB Carbide Body DBOMH-12/20M 1/8-27 NPT DVI12X-10-MQBBN-11-SB Steel Body DVI12X-10-MQBBN-11-CB Carbide Body B= F + H (1/2 Bar Dia) DVI16X-10-MQBBN-14-SB Steel Body x Dia. 4 Note: F1=F+H DVI16X-10-MQBBN-14-CB Carbide Body Leave enough room for chip DVI20X-10-MQBBN-18-SB Steel Body evacuation DVI20X-10-MQBBN-18-CB Carbide Body DBOMH-12/20M 1/8-27 NPT DVI12X-12-MQBBN-12-SB Steel Body DVI12X-12-MQBBN-12-CB Carbide Body B= F + H (1/2 Bar Dia) DVI16X-12-MQBBN-16-SB Steel Body x Dia. 4 Note: F1=F+H DVI16X-12-MQBBN-16-CB Carbide Body Leave enough room for chip DVI20X-12-MQBBN-20-SB Steel Body evacuation DVI20X-12-MQBBN-20-CB Carbide Body DBOMH-12/20M 1/8-27 NPT DVI12X-14-MQBBN-14-CB Carbide Body B= F + H + (1/2 Bar Dia) DVI16X-14-MQBBN-18-CB x Dia. 4 Carbide Body Note: Leave enough F1=F+H DVI20X-14-MQBBN-23-CB Carbide Body room for chip evacuation Call: Visit: sales@doriantool.com DBOMH-12/20M 1/8-27 NPT

53 Boring Heads for Solution Tool! Quick Change Boring Bar 3/4 to 1-1/4 Positive Boring Head Specification Head R.H. L.H. Reference Bar Dia. B E F K Gage Insert Insert Torx Torx Key Locking Head Screw 5 F mm º 0 DBOMH-12/20M-SCLCR/L º CC TS M1 T-15 QCHLS-3MCS K E B Thru Coolant Shown Opposite º 5 F mm º 0 DBOMH-12/20M-SCLPR º DC TS M1 T-15 QCHLS-3MCS K E B Thru Coolant Shown Opposite º F mm º DBOMH-12/20M-SDNCR/L º DC TS M1 T-15 QCHLS-3MCS K E B Thru Coolant Shown Opposite º 17.5º F mm DBOMH-12/20M-SDQCR/L º º DC TS M2 T-8 QCHLS-3MCS º º E B Thru Coolant Shown Opposite DBOMH-12/20M-SDQCR/L º º DC TS M1 T-15 QCHLS-3MCS 3º F mm DBOMH-12/20M-SDUCR/L º º DC TS M2 T-8 QCHLS-3MCS 0º º º Kº E B Thru Coolant Shown Opposite DBOMH-12/20M-SDUCR/L º º DC TS M1 T-15 QCHLS-3MCS F 0º 5º E mm Thru Coolant Shown Opposite B Kº DBOMH-12/20M-SDXCR/L º º º Call: Visit: sales@doriantool.com 53 DC TS M1 T-15 QCHLS-3MCS

54 Boring Heads for Solution Tool! Quick Change Boring Bar 3/4 to 1-1/4. Positive Boring Head Specification Head R.H. L.H. Reference Bar Dia. B E F K Gage Insert Insert Torx Torx Key Locking Head Screw 3º F mm DBOMH-12/20M-STUCR/L º º TC TS M2 T-8 QCHLS-3MCS º 0º º Kº E B Thru Coolant Shown Opposite DBOMH-12/20M-STUCR/L º º TC TS M1 T-15 QCHLS-3MCS 3º F mm º 0º DBOMH-12/20M-SVUCR/L º VC 221 TS M2 T-8 QCHLS-3MCS Kº E B Thru Coolant Shown Opposite º 5º F mm º 0º DBOMH-12/20M-SWLCR/L º WC TS M1 T-15 QCHLS-3MCS Kº E B Thru Coolant Shown Opposite º Threading Head Specification Head R.H. L.H. Reference Bar Dia. B E F Gage Insert Insert Torx Torx Key Locking Head Screw F mm DBOMH-12/20M-SNR/L Laydown 16-A60 TS M1 T-15 QCHLS-3MCS E B Thru Coolant Shown Opposite Call: Visit: sales@doriantool.com

55 Solution Tool! The No! Vibration Re-Tunable Modular Jet-Stream TM Boring Bar Diameters 1 1/2, 2, 2 1/2, 3 and 4. C1 Thru coolant 1/2 NPT D C3 C4 L ( Max. Depth of Bore / Boring Ratio) C2 ( Holding Area) Deep hole boring made simple 8xD, 10xD and 12xD boring (overhang) ratios For high material removal rate, high surface finish and tight tolerances Bars are pre-tuned at the factory to the specific boring ratio Bars can be Re-tuned on the machine to optimize boring performance in challenging applications C Boring Bar Center Line F1 F H Boring Head Center Line See page Bar Neutral Boring Ratio Holding Ratio Construction Bar Dia. D Actual Min. Bore B F1 H L C C1 C2 C3 C4 Modular Head Coolant Attachment Thread ASI24X-8-DVI-MBBB-18-SB Steel Body B= F + H + ASI32X-8-DVI-MBBB-24-SB Steel Body (1/2 Bar Dia) ASI40X-8-DVI-MBBB-30-SB x Dia. 4 Steel Body Note: F1=F+H Leave enough ASI48X-8-DVI-MBBB-36-SB Steel Body room for chip evacuation ASI64X-8-DVI-MBBB-48-SB Steel Body DBOMH24/40_A_R/L 1/4-18 NPT ASI24X-10-DVI-MBBB-21-SB Steel Body B= F + H + ASI32X-10-DVI-MBBB-28-SB Steel Body (1/2 Bar Dia) ASI40X-10-DVI-MBBB-35-SB x Dia. 4 Steel Body Note: F1=F+H Leave enough ASI48X-10-DVI-MBBB-42-SB Steel Body room for chip evacuation ASI64X-10-DVI-MBBB-56-SB Steel Body DBOMH24/40_A_R/L 1/4-18 NPT ASI24X-12-DVI-MBBB-24-SB Steel Body B= F + H + ASI32X-12-DVI-MBBB-32-SB Steel Body (1/2 Bar Dia) ASI40X-12-DVI-MBBB-40-SB x Dia. 4 Steel Body Note: F1=F+H Leave enough ASI48X-12-DVI-MBBB-48-SB Steel Body room for chip evacuation ASI64X-12-DVI-MBBB-64-SB Steel Body DBOMH24/40_A_R/L 1/4-18 NPT ASI24X-14-DVI-MBBB-27-CB Carbide Body B= F + H ASI32X-14-DVI-MBBB-36-CB Carbide Body (1/2 Bar Dia) ASI40X-14-DVI-MBBB-45-CB x Dia 4 Carbide Body Note: F1=F+H Leave enough ASI48X-14-DVI-MBBB-54-CB Carbide Body room for chip evacuation ASI64X-14-DVI-MBBB-72-CB Carbide Body DBOMH24/40_A_R/L 1/4-18 NPT Call: Visit: sales@doriantool.com 55

56 Boring Heads for Solution Tool! Modular Jet-Stream TM Boring Bar 1/2 to 4 Dia. Negative Boring Head Specification 5º Head R.H. L.H. Reference Bar Dia. B E F K Gage Insert Seat Seat Screw Jet-StreamTM Clamp Clamp Screw Locking Head Screw for 1.5" Boring Bar 2.0" to 4.0" Boring Bar F ,1mm DBOMH-24/40M-ADCLNR/L / CN 432 DC-432 TS M1 JSLC-HPCTW-4N JSCS-04 7º MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Shown Opposite DBOMH-24/40M-ADCLNR/L / CN 543 DC-533 TS M1 JSLC-HPC5 JSCS º ,1mm 7º DBOMH-24/40M-ADDQNR/L / DN 432 DD-432 TS M1 JSLC-HPD4 JSCS-04 MHLS-5MCS MHLS-6MCS E B Kº Thru Coolant Shown Opposite 27.5º F ,1mm DBOMH-24/40M-ADDNNR / DBOMH-24/40M-ADDNNR / DN 432 DD-432 TS M1 JSLC-HPD4 JSCS-04 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Shown Opposite DBOMH-24/40M-ADDNNR / F ,1mm DBOMH-24/40M-ADDXNR / º 5º Kº DBOMH-24/40M-ADDXNR / DN 432 DD-432 TS M1 JSLC-HPD4 JSCS-04 MHLS-5MCS MHLS-6MCS E B Thru Coolant DBOMH-24/40M-ADDXNR / Shown Opposite F 3º ,1mm 7º DBOMH-24/40M-ADDUNR/L / DN 432 DD-432 TS M1 JSLC-HPD4 JSCS-04 MHLS-5MCS MHLS-6MCS E Shown Opposite B Thru Coolant Kº F 3º ,1mm DBOMH-24/40M-ADTUNR/L / TN 332 DT-322 TS M1 JSLC- HPDT3-BR/L JSCS-03 7º MHLS-5MCS MHLS-6MCS E B Thru Coolant Kº DBOMH-24/40M-ADTUNR/L / TN 432 DT-432 TS M1 JSLC- HPTW-4R/L JSCS-04 Shown Opposite 56 Call: Visit: sales@doriantool.com

57 Boring Heads for Solution Tool! Modular Jet-Stream TM Boring Bar 1/2 to 4 Dia. Negative Boring Head Specification 3º Head R.H. L.H. Reference Bar Dia. B E F K Gage Insert Seat Seat Screw Jet-Stream TM Clamp Clamp Screw Locking Head Screw for 1.5" Boring Bar 2.0" to 4.0" Boring Bar F 38,1mm 7º DBOMH-24/40M-ADVUNR/L / VN 332 DV-322 TS M1 JSLC-HPV3 JSCS-04 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Shown Opposite 5º ,1mm 7º DBOMH-24/40M-ADWLNR/L / WN 432 DW-432 TS M1 JSLC- HPTW-4R/L JSCS-04 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Shown Opposite Positive Boring Head Specification 5º Head R.H. L.H. Reference Bar Dia. B E F K Gage Insert Insert Screw Torx Key Locking Head Screw for 1.5" Boring Bar 2.0" to 4.0" Boring Bar F 38,1mm 0º DBOMH-24/40M-ASCLCR/L / CC 432 TS M1 T-20 MHLS-5MCS MHLS-6MCS E B Kº Thru Coolant Shown Opposite 17.50º F ,1mm DBOMH-24/40M-ASDQCR/L / DC TS M1 T-15 7º MHLS-5MCS MHLS-6MCS B Kº E DBOMH-24/40M-ADSQCR/L / DC 432 TS M1 T-20 Thru Coolant Shown Opposite F 3º ,1mm DBOMH-24/40M-ASDUCR/L / DC TS-4.7-8M1 T-15 0º MHLS-5MCS MHLS-6MCS E B Kº DBOMH-24/40M-ASDUCR/L / DC 432 TS M1 T-20 Thru Coolant Shown Opposite F 5º mm DBOMH-24/40M-ASDXCR/L / DC TS M1 T-15 MHLS-5MCS MHLS-6MCS E B Thru Coolant Shown Opposite Call: Visit: sales@doriantool.com 57

58 Boring Heads for Solution Tool! Modular Jet-Stream TM Boring Bar 1/2 to 4 Dia. Positive Boring Head Specification F 3º ,1mm Head R.H. L.H. Reference Bar Dia. B E F K DBOMH-24/40M-ASTUCR/L / Gage Insert TC Insert Screw Torx Key TS-4.7-8M1 T-15 Locking Head Screw for 1.5" Boring Bar 2.0" to 4.0" Boring Bar 0º Kº MHLS-5MCS MHLS-6MCS E B Thru Coolant DBOMH-24/40M-ASTUCR/L / TC 432 TS M1 T-20 Shown Opposite F 3º ,1mm 0º DBOMH-24/40M-ASVUCR/L / VC 332 TS-4.7-8M1 T-15 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Shown Opposite Laydown Threading Head Specification Head R.H. L.H. Reference Bar Dia. B E F Gage Insert Seat Seat Screw Chip Flush Nozzle Locking Head Screw for 1.5" 2.0" to 4.0" Boring Bar Boring Bar F mm DBOMH-24/40M-ADLNR/L / Laydown 16-A60 GXE/I-16 TS M1 JSPN-M6 MHLS-5MCS MHLS-6MCS DBOMH-24/40M-ADLNR/L / Laydown 22-N60 NXE/I-22 TS M1 JSPN-M6 E B Thru Coolant Shown Opposite DBOMH-24/40M-ADLNR/L / Laydown 27-Q60 VXE/I-27 TS M1 JSPN-M6 MHLS-5MCS MHLS-6MCS DorNotch Threading Head Specification Head R.H. L.H. Reference Bar Dia. B E F Gage Insert Jet-Stream TM Clamp Clamp Screw Chip Flush Nozzle Locking Head Screw for 1.5" 2.0" to 4.0" Boring Bar Boring Bar F ,1mm DBOMH-24/40M-ADNER/L / DorNotch NG-3L NG-3R JSLC-HP73 JSLC-HP72 JSCS-04 JSPN-M6 MHLS-5MCS MHLS-6MCS E B Thru Coolant Shown Opposite On edge Threading Head Specification Head R.H. L.H. Reference Bar Dia. B E F Gage Insert Jet-Stream TM Clamp Clamp Screw Chip Flush Nozzle Locking Head Screw for 1.5" Boring Bar 2.0" to 4.0" Boring Bar F ,1mm DBOMH-24/40M-ADTHOR/L / TN 432 GTS-2 T-20 JSPN-M6 MHLS-5MCS MHLS-6MCS E B Thru Coolant Shown Opposite 58 Call: Visit: sales@doriantool.com

59 THREADING On Edge - Laydown - DorNotch Call: Visit: sales@doriantool.com 59

60 DVK10 Hard and wear resistant C2 substrate with PVD TiN Coating. Very sharp cutting edge. First choice for aluminum and non-ferrous materials. Second choice for stainless steels at low SFM Can also be used on cast iron at low SFM. DVP656 Tough, wear resistant C6 substrate with PVD TiN Coating. Honed edge for edge-security. First choice for carbon and alloy steels. DASK25B Hard and wear resistant C2 Substrate with PVD TiAlN Coating. Small honed edge provides sharp cutting action and edge security at the same time. First choice for stainless steels and high temp alloys. Also use on non-ferrous materials except aluminum. Second choice for carbon and alloy steels, and cast iron. Most universal and general purpose grade for multi-material applications. On Edge Threading System: 3 cutting edges. The most economical and popular system. Same insert can be used for external and internal threading, in either right and left hand cutting direction. Laydown Threading System: 3 cutting edges. The most compact system. Ideal for ID threading. DorNotch Threading System: 2 cutting edges. Most rigid clamping system for high performance threading. 60º On Edge Threading ANSI DVK10 Grade DVP656 Grade DASK25B Grade Insert Dimensions Negative Rake TNMA & TNMC TNMA TNMC TNMA TNMC TNMA TNMC TNMA TNMC I.C. Thick T I.C. 60 TNMA-32NV TNMC-32NV TNMA-43NV TNMC-43NV TNMA-43NV.010R TNMC-43 NV.010R TNMA-54NV TNMC-54NV TNMA-54NV.010R TNMC-54NV.010R Hole Dia. Rad TPI º Positive Rake TPMA & TPMC TPMA TPMC TPMA TPMC TPMA TPMC TPMA TPMC I.C. Thick Hole Dia. Rad. TPI TPMA-32NV TPMC-32NV T I.C. 60 TPMA-43NV TPMC-43NV Laydown 60 Partial Profile External Inch DVK10 Grade DVP656 Grade Insert Dimensions Pitch External External External External External External I.C. Inch L mm X mm Y mm TPI mm 11ER-A60 11EL-A ,8 0, ,5-1,5 16ER-A60 16EL-A ,8 0, ,5-1,5 16ER-G60 16EL-G ,2 1, ,75-3,0 16ER-AG60 16EL-AG ,2 1, ,5-3,0 22ER-N60 22EL-N ,7 2, ,5-5,0 Internal 27ER-Q60 27EL-Q ,1 3,1 4-4,5 5,5-6,0 Internal Internal Internal Internal Internal Internal I.C. Inch L mm X mm Y mm TPI MM 06IR-A60 06IL-A ,9 0,6 0, ,5-1,5 08IR-A60 08IL-A ,7 0,6 0, ,5-1,5 11IR-A60 11IL-A ,8 0, ,5-1,5 16IR-A60 16IL-A ,8 0, ,5-1,5 16IR-G60 16IL-G ,2 1, ,75-3,0 16IR-AG60 16IL-AG ,2 1, ,5-3,0 22IR-N60 22IL-N ,7 2, ,5-5,0 27IR-Q60 27IL-Q ,1 3,1 4-4,5 5,5-6,0 DorNotch 60 Partial Profile NT Negative Rake Angle ANSI DVK10 DVP656 DASK25B Insert Dimensions Pitch NT NT NT NT NT NT NT NT Gage Dia. A IN B IN E IN R IN T IN EXT. INT. EXT. INT. IN mm E R NT-2R NT-2L , B T NT-3R NT-3L ,25 4 A GAGE DIAM. NT-4R NT-4L , Call: Visit: sales@doriantool.com

61 MTVO-A R/L Threading Toolholder- Style V - O.D. Threading and Shallow Grooving for triangle TNMA inserts Max. GRV Height Length Depth V MTVOR/L08-3A-A MTVOR/L08-3B-A MTVOR/L10-3B-A MTVOR/L12-3B-A MTVOR/L16-3D-A MTVOR/L12-4B-A MTVOR/L16-4D-A MTVOR/L20-4D-A MTVOR/L24-4E-A MTVOR/L16-5D-A MTVOR/L20-5D-A TNMA Gage Insert MTVOR/L20-64D-A MTVOR/L20-66D-A STVO R/L Threading Toolholder- Style V - O.D. Threading and Shallow Grooving for triangle TNMC inserts Max. GRV Height Length Depth V STVOR/L08-3A STVOR/L10-3B STVOR/L12-3B STVOR/L16-3D STVOR/L12-4B STVOR/L16-4D STVOR/L20-4D STVOR/L24-4E STVOR/L16-5D STVOR/L20-5D TNMC Gage Insert STVOR/L20-64D STVOR/L20-66D MTHO-A R/L Threading Toolholder- Style H - Gang Toolholder for Shallow Grooving or I.D. Threading for triangle TNMA inserts Min. Max. GRV TNMA Bore Depth V Gage Height Length M Min. I.D. O.D. Insert MTHOR/L10-3B MTHOR/L12-3B MTHOR/L12-4B MTHOR/L16-4D MTHOR/L16-5D MTHOR/L20-5D MTZO R/L Threading Toolholder- Style Z - Reverse Threading for triangle TNMA inserts Max. GRV Height Length Depth V MTZOR/L12-3B MTZOR/L16-4D MTZOR/L20-4D MTZOR/L20-66D MTZOR/L24-66E TNMA Gage Insert MTVO-CN R/L Threading Toolholder- Style V - O.D. Threading and Shallow Grooving for triangle TNMC inserts TNMC Height Length Max. GRV Depth V Gage Insert MTVOR/L08-3A-CN MTVOR/L08-3B-CN MTVOR/L10-3B-CN MTVOR/L12-3B-CN MTVOR/L16-3D-CN MTVOR/L12-4B-CN MTVOR/L16-4D-CN MTVOR/L20-4D-CN MTVOR/L24-4E-CN MTVOR/L16-5D-CN MTVOR/L20-5D-CN STZO R/L Threading Toolholder-Style Z - Reverse Threading for triangle TNMC inserts Height Length Max. GRV Depth V STZOR/L12-3B STZOR/L16-3D TNMC Gage Insert STZOR/L20-4D STZOR/L16-5D S-MTHO-A R/L Threading Bar- Style H - I.D. Threading and Shallow Grooving for triangle TNMA inserts TNMA Min Bore Length Dia. Max. GRV Depth V Gage Insert S16T-MTHOR/L-3-A S20U-MTHOR/L-3-A S20U-MTHOR/L-4-A S24U-MTHOR/L-4-A S32V-MTHOR/L-4-A S32V-MTHOR/L-5-A S40V-MTHOR/L-5-A S48Y-MTHOR/L-5-A S40V-MTHOR/L-66-A S48Y-MTHOR/L-66-A S-MTHO-C R/L Threading Bar- Style H - I.D. Threading and Shallow Grooving for triangle TNMC inserts Min Bore Length Dia. Max. GRV Depth V S16T-MTHOR/L-3-C S20U-MTHOR/L-3-C S20U-MTHOR/L-4-C S24U-MTHOR/L-4-C S32V-MTHOR/L-4-C S32V-MTHOR/L-5-C S40V-MTHOR/L-5-C TNMC Gage Insert S40V-MTHOR/L-66-C STHO R/L Threading Toolholder- Style H - Gang Toolholder for Shallow Grooving for I.D. Threading for triangle TNMC inserts Max. GRV Min. Depth V TNMC Height Length Bore M Gage Min. I.D. O.D. Insert STHOR/L10-3B STHOR/L12-3B STHOR/L12-4B STHOR/L16-4D SE R/L Threading Toolholder- Style E- Laydown for LAYDOWN inserts Height Length Laydown Gage Insert SER/L A60 SER/L SER/L SER/L SER/L SER/L SER/L G60 27-Q60 Call: Visit: sales@doriantool.com 61

62 SE Gang R/L Threading Toolholder- Style EG - Gang Toolholder for Gang Toolposts for LAYDOWN inserts Height Length Laydown Gage Insert SEGR/L A60 SEGR/L SEGR/L G60 SEGR/L SE R/L Qualified Threading Toolholder- Style - Laydown Offset Head for LAYDOWN inserts Height Length Laydown Gage Insert SER/L Q A60 SER/L Q SER/L Q G60 SER/L Q SER/L Q SER/L Q N60 SER/L Q Q60 SE R/L Qualified Threading Toolholder- Style - Drop Head for LAYDOWN inserts Height Laydown Length Gage Insert SER/L CQ SER/L CQ G60 SER/L CQ NS R/L Threading & Grooving Toolholder- Style - External DorNotch Toolholder for threading and grooving DorNotch inserts DorNotch Height Length Gage Insert NSR/L NSR/L08-2J NSR/L10-2B NSR/L12-2B NSR/L16-2C NSR/L12-3A NSR/L12-3B NSR/L16-3C NSR/L16-3D NSR/L20-3D NSR/L16-4C NSR/L16-4D NSR/L20-4C NSR/L20-4D NG-2R NG-2L NG-3R NG-3L NG-4R NG-4L NE R/L Threading & Grooving Toolholder- Style - Gang External DorNotch Toolholder for threading and grooving DorNotch inserts Height Length DorNotch Gage Insert NER/L NER/L08-2J NER/L12-2B NG-2L NG-2R NER/L12-3B NG-3L NER/L16-3D NG-3R NER/L16-4D NG-4L NER/L20-4D NG-4R SN R/L Threading Bar- Style - Internal Small Laydown Bar for LAYDOWN inserts Min Bore Length Dia. Laydown Gage Insert SNR/L SNR/L A60 SNR/L SNR/L G60 SNR/L SNR/L SNR/L N60 NR R/L Grooving Gang Toolholder- Style - Corner Grooving External DorNotch Toolholder for grooving DorNotch inserts DorNotch Height Length Gage Insert NRR/L12-3B NRR/L16-3C NRR/L16-3D NRR/L20-3D NRR/L24-3D NG-3L NG-3R SN R/L Threading Bar- Style - Internal Laydown Bar for LAYDOWN inserts Min Bore Length Dia. Laydown Gage Insert SNR/L SNR/L SNR/L G60 SNR/L SNR/L SNR/L SNR/L SNR/L N60 SNR/L SNR/L SNR/L SNR/L Q60 S-NE R/L Threading & Grooving Bar - Style - Internal DorNotch Bar for threading and grooving DorNotch inserts Min Bore Length DorNotch Gage Insert S10S-NER/L NG-2L S12S-NER/L NG-2R S16T-NER/L S20U-NER/L NG-3L S24U-NER/L NG-3R S28U-NER/L S28U-NER/L NG-4L S32V-NER/L NG-4R SN R/L Threading Bar- Style - Internal Laydown Miniature Threading Bar for LAYDOWN inserts Min Bore Length Dia. Laydown Gage Insert SNR/L0265-K A60 62 Call: Visit: sales@doriantool.com

63 KOOL CUTTM MODULAR TURNING & GROOVING SYSTEM Double Jet Coolant System KOOL Cut TM Modular Turning & Grooving Built for Productivity! Interchangeable s & Cartridges Technology

64 KOOL Cut Modular Turning and Grooving Straight Toolholders D A C3 C1 C C2 Shown B (2) 1/8 NPT Coolant Inlets Size A B D C C1 C2 C3 ADDN-MTR-12-C /4" ADDN-MTR-16-D " ADDN-MTR-20-E /4" KOOL Cut Modular Turning and Grooving 90 Gang Toolholders C1 C C2 A E D (2) 1/8 NPT Coolant Inlets B Shown Size A B D E C C1 C2 ADDN-MGR-12-C /4" ADDN-MGR-16-D " ADDN-MGR-20-E /4" Call: Visit: sales@doriantool.com

65 Cartridges for Toolholders F Pitch Line Insert Size T Max L W.079" Insert Size Cartridge KOOL Cut Modular Turning and Grooving T. Max Insert Insert Insert Cartridge L (in) F (in) W (in) (in) Width Style Lock Screw Lock Screw ADKDN-TR " Hex Key Coolant Seal ADKDN-TR " DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 ADKDN-TR " Cartridge Shown F Pitch Line Insert Size T Max L W.118" Insert Size Cartridge KOOL Cut Modular Turning & Grooving T. Max Insert Insert Insert Cartridge L (in) F (in) W (in) (in) Width Style Lock Screw Lock Screw Hex Key Coolant Seal ADKDN-TR " ADKDN-TR " DNTQ EU-N DNTR EU-N CS-M0616 CS-M0620 HAHK-50 CS08-04 DNPG SR-N ADKDN-TR " Cartridge Shown F Pitch Line Insert Size W.157" Insert Size Cartridge KOOL Cut Modular Turning and Grooving T. Max Insert Insert Insert Cartridge L (in) F (in) W (in) (in) Width Style Lock Screw Lock Screw Hex Key Coolant Seal T Max L ADKDN-TR " ADKDN-TR " ADKDN-TR " DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Cartridge Shown ADKDN-TR " F Pitch Line Insert Size W.197" Insert Size Cartridge KOOL Cut Modular Turning and Grooving T. Max Insert Insert Insert Cartridge L (in) F (in) W (in) (in) Width Style Lock Screw Lock Screw Hex Key Coolant Seal T Max L ADKDN-TR " ADKDN-TR " ADKDN-TR " DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Cartridge Shown ADKDN-TR " F Pitch Line Insert Size W.236" Insert Size Cartridge KOOL Cut Modular Turning and Grooving T. Max Insert Insert Insert Cartridge L (in) F (in) W (in) (in) Width Style Lock Screw Lock Screw Hex Key Coolant Seal T Max L ADKDN-TR " ADKDN-TR " ADKDN-TR " ADKDN-TR " DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Cartridge Shown 5º Pitch Line T-Max F Insert Size 45º L W.079" Insert Size Cartridge KOOL Cut Modular 45 Grooving T. Max Insert Insert Insert Cartridge L (in) F (in) W (in) (in) Width Style Lock Screw Lock Screw ADKDN-UR " DNTR Hex Key Coolant Seal ADKDN-UR " DNTR CS-M0616 CS-M0620 HAHK-50 CS08-04 Shown Cartridge Shown ADKDN-UR " DNTR Call: Visit: sales@doriantool.com 65

66 KOOL Cut Modular Turning and Grooving Straight Toolholders A D C2 C C3 C1 Shown B (2) 1/8 NPT Coolant Inlets Size A B D C C1 C2 C3 ADDN-MTL-12-C /4" ADDN-MTL-16-D " ADDN-MTL-20-E /4" KOOL Cut Modular Turning and Grooving 90 Gang Toolholders E D A C1 C C2 Shown B (2) 1/8 NPT Coolant Inlets Size A B D C C1 C2 ADDN-MGL-12-C /4" ADDN-MGL-16-D " ADDN-MGL-20-E /4" Call: Visit: sales@doriantool.com

67 Cartridges for Toolholders W L Pitch Line Insert Size F T Max.079" Insert Size Cartridge KOOL Cut Modular Turning and Grooving T. Max (in) L (in) F (in) W (in) Insert Insert Insert Cartridge Width Style Lock Screw Lock Screw ADKDN-TL " Hex Key Coolant Seal ADKDN-TL " ADKDN-TL " DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Cartridge Shown W L Pitch Line Insert Size F T Max.118" Insert Size Cartridge KOOL Cut Modular Turning and Grooving Insert Insert Insert Cartridge T. Max (in) L (in) F (in) W (in) Width Style Lock Screw Lock Screw ADKDN-TL " ADKDN-TL " DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 ADKDN-TL " Hex Key Coolant Seal CS-M0620 HAHK-50 CS08-04 Cartridge Shown W L Pitch Line Insert Size F T Max.157" Insert Size Cartridge KOOL Cut Modular Turning and Grooving T. Max (in) L (in) F (in) W (in) Insert Insert Insert Cartridge Width Style Lock Screw Lock Screw ADKDN-TL " Hex Key Coolant Seal ADKDN-TL " ADKDN-TL " DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Cartridge Shown ADKDN-TL " W L Pitch Line Insert Size F T Max.197" Insert Size Cartridge KOOL Cut Modular Turning and Grooving T. Max (in) L (in) F (in) W (in) Insert Insert Insert Cartridge Width Style Lock Screw Lock Screw ADKDN-TL " Hex Key Coolant Seal ADKDN-TL " ADKDN-TL " DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Cartridge Shown ADKDN-TL " W L Pitch Line Insert Size F T Max.236" Insert Size Cartridge KOOL Cut Modular Turning and Grooving T. Max (in) L (in) F (in) W (in) Insert Insert Insert Cartridge Width Style Lock Screw Lock Screw ADKDN-TL " Hex Key Coolant Seal ADKDN-TL " ADKDN-TL " DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 ADKDN-TL " Cartridge Shown W Pitch Line T-Max F Insert Size 45º L Pitch Line.079" Insert Size Cartridge KOOL Cut Modular 45 Grooving T-Max F W Insert Insert Insert Cartridge T. Max (in) L (in) F (in) W (in) Width Style Lock Screw Lock Screw Insert Size 45º ADKDN-UL L " DNTR EU-N Hex Key Coolant Seal ADKDN-UL " DNTR EU-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Cartridge Shown ADKDN-UL " DNTR EU-N Cartridge Shown Call: Visit: sales@doriantool.com 67

68 Face Grooving Cartridges for Toolholders (.118" Insert Size) F Insert Size W T-Max L Cartridge Shown T-Max First Cut Diameter T. Max Insert Insert Insert Cartridge L (in) F (in) W (in) Min. (in) Max. (in) (in) Width Style Lock Screw Lock Screw ADCDN-FL " ADCDN-FL " ADCDN-FL " Hex Key Coolant Seal ADCDN-FL " ADCDN-FL " ADCDN-FL " ADCDN-FL " ADCDN-FL " ADCDN-FL > > " DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 T. Max ADCDN-FL " ADCDN-FL " ADCDN-FL " ADCDN-FL " ADCDN-FL > > " DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 T. Max ADCDN-FL " ADCDN-FL " ADCDN-FL > > " DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS Call: Visit: sales@doriantool.com

69 Face Grooving Cartridges for Toolholders (.236" Insert Size) F Insert Size W T-Max L Cartridge Shown T-Max First Cut Diameter T. Max Insert Insert Insert Cartridge L (in) F (in) W (in) Min. (in) Max. (in) (in) Width Style Lock Screw Lock Screw ADCDN-FL " Hex Key Coolant Seal ADCDN-FL " ADCDN-FL " ADCDN-FL " ADCDN-FL60-500> > " DNTQ EU-N DNTR EU-N CS-M0616 CS-M0620 HAHK-50 CS08-04 T-Max ADCDN-FL " ADCDN-FL " ADCDN-FL " ADCDN-FL60-500> > " DNTQ EU-N DNTR EU-N CS-M0616 CS-M0620 HAHK-50 CS08-04 T-Max ADCDN-FL " ADCDN-FL " ADCDN-FL " ADCDN-FL60-500> > " DNTQ EU-N DNTR EU-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Call: Visit: sales@doriantool.com 69

70 Turning & Grooving & Toolholder T-Max F Insert Size A C H B Shown, Opposite E Shown, Opposite Toolholder Insert Size Insert Style A B C H F T-Max Insert Locking Screw Hex Key DETGFR12-030C-S DETGFR12-030C-M DETGFR12-030C-L DNTQ EU-N DETGFR16-030D-S " DNTR EU-N DETGFR16-030D-M (3mm) DETGFR85-030D-S DNPG SR-N DETGFR85-030D-M DETGFR85-030D-L DETGFR12-040C-S DETGFR12-040C-M DETGFR12-040C-L DETGFR16-040D-S DNTQ EU-N DETGFR16-040D-M " (4mm) DNTR EU-N DETGFR16-040D-L DNPG SR-N DETGFR85-040D-S DETGFR85-040D-M DETGFR85-040D-L CS-M0616 HAHK-50 Toolholder Insert Size Insert Style A B C H F T-Max Insert Locking Screw DETGFL12-030C-S DETGFL12-030C-M DETGFL16-030D-S09 DETGFL16-030D-M14 DETGFL85-030D-S DNTQ EU-N.118" DNTR EU-N (3mm) DNPG SR-N DETGFL85-030D-M DETGFL85-030D-L DETGFL12-040C-S DETGFL12-040C-M DETGFL12-040C-L DETGFL16-040D-S DNTQ EU-N DETGFL16-040D-M " (4mm) DNTR EU-N DETGFL16-040D-L DNPG SR-N DETGFL85-040D-S DETGFL85-040D-M DETGFL85-040D-L CS-M0616 HAHK Call: Visit: sales@doriantool.com

71 Kool Cut Twin Edge Parting-Off Insert Blades Neutral Double Cutting Edge High Rigidity Better Finish Straight Cut Positive Insert Stop Double "V" Locking System T-Max W Insert Size W Insert Size D H1 H H1 L1 A L 150º Insert Extraction Key Sold Separately 19mm (3/4") Twin Edge Blades Blades T. Max A D L L1 H H1 Insert DNTQ EU-N TWECOB-DNTF DNPG SR-N Insert Width Insert Extraction Key KCIK-DN mm ( 1") Twin Edge Blades Blades T. Max A D L L1 H H1 Insert DNTQ EU-N TWECOB-DNTF DNPG SR-N DNTQ EU-N TWECOB-DNTF DNTR EU-N DNPG SR-N DNTQ EU-N TWECOB-DNTF DNTR EU-N DNPG SR-N 32mm (1 1/4") Twin Edge Blades Blades T. Max A D L L1 H H1 Insert DNTQ EU-N TWECOB-DNTF DNPG SR-N DNTQ EU-N TWECOB-DNTF DNTR EU-N DNPG SR-N DNTQ EU-N TWECOB-DNTF DNTR EU-N DNPG SR-N DNTQ EU-N TWECOB-DNTF DNTR EU-N DNPG SR-N TWECOB-DNTF DNTQ EU-N DNPG SR-N Insert Width Insert Width Insert Extraction Key KCIK-DN Insert Extraction Key KCIK-DN Call: Visit: sales@doriantool.com 71

72 Turning & Grooving Insert Grades Insert Specification Double-End Cutting Edge DNTQ-N- DUP35UG Insert Application Turning Grooving Parting-Off Neutral Straight Nose Multi-Cutting Direction and Insert Dimension Cutting Data Maximum a p Depth of Cut for Turning Maximum f n Feed Rate for Turning, Grooving and Parting-off Width Length Corner Radius inch in/rev..079 (2mm) " in/rev.118 (3mm) " in/rev Insert Geometry, Material Application.157 (4mm) " in/rev Steel Stainless Steel Cast Iron Non Ferrous Super Alloys.197 (5mm) " in/rev First Choice Grade Second Best.236 (6mm) " in/rev Double-End Cutting Edge DNTR-N- DUP35UG Profiling Turning Grooving Neutral Round Nose Multi-Cutting Direction and Cutting Data Maximum f Maximum a n p Feed Rate for Insert Dimension Depth of Cut Turning, Grooving for Turning and Parting-off Width Length Radius inch in/rev. Insert Geometry, Material Application.118 (3mm) (4mm) (5mm) " (1.5mm).079" (2.0mm).098" (2.5mm) in/rev Steel Stainless Steel Cast Iron Non Ferrous Super Alloys in/rev First Choice Grade Second Best in/rev Double-End Cutting Edge DNPG-N- DPP40SG Neutral Straight Nose Uni-Direction Parting Off & Grooving Grooving Parting-Off Cutting Data Insert Dimension Maximum f n Feed Rate for Parting-off Width Length Corner Radius in/rev..079 (2mm) ".006 in/rev.118 (3mm) ".008 in/rev Insert Geometry, Material Application.157 (4mm) ".009 in/rev Steel Stainless Steel Cast Iron Non Ferrous Super Alloys.197 (5mm) ".010 in/rev First Choice Grade Second Best.236 (6mm) ".012 in/rev 72 Call: Visit: sales@doriantool.com

73 Turning & Grooving Insert Grades P DUP35UG DPP40SG Material V c (SFM) Material V c (SFM) Steel F/min. m/min. Steel F/min. m/min. Carbon Steel Carbon Steel Low Alloy Steel P Low Alloy Steel High Temp Alloys High Temp Alloys M K N S Ferritic Ferritic Austenitic Austenitic M Duplex Duplex Martensitic Martensitic Gray Cast Iron Gray Cast Iron Modular Cast Iron K Modular Cast Iron Malleable Cast Iron Malleable Cast Iron Unleaded Copper Unleaded Copper Brass N Brass Unleaded Bronze Unleaded Bronze Iron Base Iron Base Nickel Base S Nickel Base Titanium Titanium DUP35UG HC-P25/M25 K30 N30 S30 Coated PVD-TiAlN 4µm DPP40SG HC-P45/M45 Multi Coated PVD-TiAlN 7µm Insert Characteristics Hard, Wear, Abrasive and Impact Resistant Insert Characteristics Extremely Tough and Impact Resistant Substrate First Choice Application Universal Multi Purpose Turning and Grooving Application; for carbon steel, alloy steel, stainless steel, cast iron, high-temp alloys & non-ferrous materials First Choice Application For Heavy or Interrupted Part Off and Grooving Applications; for Forgings and Castings of Carbon Steel, Alloy Steel, Stainless Steel and Cast Iron Cutting Speed SFM (Vc) High Cutting Speed in stable turning and grooving conditions, light interrupted cut Cutting Speed SFM (Vc) Low to Medium Cutting Speed in unstable conditions and heavy interrupted cut Cutting Condition Wet Cutting Condition Wet Insert Specifications T Square Nose W Length Application Part Number Insert Size Width Length Corner Radius Grade DUP35UG DNTQ EU-N DUP35UG.079 (2mm) " Turning Grooving Parting-Off DNTQ EU-N DUP35UG DNTQ EU-N DUP35UG.118 (3mm).157 (4mm) ".016" DNTQ EU-N DUP35UG.197 (5mm) " DNTQ EU-N DUP35UG.236 (6mm) " R Round Nose W Grade Length Application Part Number Insert Size Width Length DNTR EU-N DUP35UG.118 (3mm) Profiling Turning Grooving DNTR EU-N DUP35UG.157 (4mm) DNTR EU-N DUP35UG.197 (5mm).984 Radius.059" (1.5mm).079" (2.0mm).098" (2.5mm) DUP35UG G Square Nose W Length Application Part Number Insert Size Width Length Corner Radius Grade DPP40SG DNPG SR-N DPP40SG.079 (2mm) " DNPG SR-N DPP40SG.118 (3mm) " Grooving DNPG SR-N DPP40SG.157 (4mm) " Parting-Off DNPG SR-N DPP40SG.197 (5mm) " DNPG SR-N DPP40SG.236 (6mm) " Call: Visit: sales@doriantool.com 73

74 SLOT GRIP POSITIVE STOP BLADES FOR CUT-OFF & GROOVING SGTN INSERTS Positive Stop Improved design featuring a Positive Stop. Inserts are securely held in Slot Grip Positive Stop Blades by a tapered locking system featuring a Positive Stop that prevents insert drift and the blade pocket from spreading once the insert is firmly in place. T. Max W W H1 D H H1 A L 19mm (3/4") Slot Grip Blades 150 Designed for use with standard SGTN cut-off inserts and standard cut-off blade holders. The insert s cutting edge location repeats accurately and as a result prevents insert splitting under heavy feed and shock loads. The blade and insert geometry allows free chip flow, minimizing insert breakage due to chip build-up. Blades T. Max A D L H H1 Insert Insert Width SGIH SGT(N/R/L)-2.079" 26mm (1") Slot Grip Blades SGIH SGT(N/R/L)-2.079" SGIH SGT(N/R/L)-3.118" SGIH SGT(N/R/L)-4.157" 32mm (1 1/4") Slot Grip Blades SGIH SGT(N/R/L)-3.118" SGIH SGT(N/RL)-4.157" SGIH SGT(N/R/L)-5.197" SGIH SGT(N/R/L)-6.236" SGIH SGT(N/R/L)-8.315" SGIH SGT(N/R/L)-9.354" SGTBN Neutral Cut-Off Toolholder for Cut-Off SGIH blades The two piece clamp style of this tool provides a precise and rigid blade locking and easy mounting of the tool into CNC turrets. Simple block design accommodates Slot Grip, Kool-Cut, and competitive blade systems. SGTBN toolholders come in a broad selection of shank sizes. Neutral H H1 H2 B B1 L Blade Used Screw used SGTBN12, ASHCSFP- SGIH19-2 SGTBN MA SGTBN SGIH26-2 Thru ASHCSFP- SGTBN SGIH MA SGTBN SGTBN25, SGIH32-3 ASHCSFP- Thru SGTBN31, MA SGIH32-9 SGTBN38, Call: Visit: sales@doriantool.com

75 SGTH R/L Cut-Off Toolholder for Cut-Off SGTN inserts The square shank design of the Cut-Off toolholder ensures a precise center line of the insert with respect to the center of the work-piece, when the toolholder is mounted directly on the CNC turret. Inserts are securely held in Slot Grip blades by a tapered locking system. No additional clamping devices are required. Slot Grip Cut-Off toolholders come in a broad selection of shank sizes. R.H. L.H. A B B1 B2 C C1 Max. Dia W Insert used SGTHR/L-9, & SGTHR/L-12, & SGTHR/L & SGTN/R/L-2-2,4 SGTHR/L & SGTHR/L-19, SGTHR/L-12, SGTHR/L SGTN/R/L-3 SGTHR/L SGTHR/L-25, SGTHR/L SGTHR/L SGTN/R/L-4 SGTHR/L-25, SGTHR/L & SGTHR/L-25, & SGTN/R/L-4,8-5 Cut-Off & Grooving Inserts are Designed for use with standard cut-off inserts and standard cut-off blade holders. The insert s cutting edge location repeats accurately and as a result prevents insert splitting under heavy feed and shock loads. The blade and insert geometry permits free chip flow, minimizing insert breakage due to chip build-up. Chip breaker Geometry Application Reduced machining force Quickly inserted into adjustable blades Controlled, coiled chip flow For cut-off and grooving Higher material removal rate Fair for interrupted cuts Insert Grade P35 K25 N25 K25 P25 M25 Insert Coating CVD TiN Coated Uncoated PVD TiAlN Coated Insert Grade Dimensions DC656 DK25 DASK25B SGTN Neutral SGTR ANSI Insert Size mm Lead Angle Width 0,05 inch Material mm Carbon & Alloy Steel Aluminum & Non-Ferrous Metals & Materials SGTN-2 2 0º SGTN-2.4 2, , SGTN-3 3 0º SGTN-4 4 0º SGTN-4.8 4, , SGTN-5 5 0º SGTN-6 6 0º SGTN-8 8 0º SGTN-9 9 0º SGTR º SGTR , , SGTR º SGTR º SGTR , , SGTR º SGTR º SGTR º Carbon & Alloy Steel 300 & 400 Series Stainless Steel Cast Iron, Copper/Brass Aluminum & Non-Ferrous Materials High Temp Alloys Hard Steel to 58 HRC SGTL º SGTL SGTL º SGTL º Call: Visit: sales@doriantool.com 75

76 SWISS SCREW MACHINE TOOLS with Advanced Thru Coolant Jet-Stream TM System Coolant ports on the side and the back Positive Qualified stop for tool holder after insert change 76 Call: Visit:

77 High Pressure Coolant Quick Connection for Standard or High Pressure Applications with Side or End Coolant Connection Item Part Number 1 DT-HP-PLIERS High Pressure Disconnecting Player To Disconnect the Hydraulic Coolant Hose Follow Two Safe & Easy Steps: 1. Place the thinner section of the wrench-nose between the coolant hose and the connector. 2. Close the wrench and it will disconnect Notch 1 of the coolant hose. Use the thicker section of the wrench-nose and close again to disconnect Notch 2. New Hydraulic Coolant Hose For Safe & Easy Disconnection Swiss Tool holders-high Pressure Coolant Connection 7 Pcs. Kit Working Pressure Part Number Bar PSI Item DT-HPTU-ASSY Swiss High Pressure Quick Release Coolant 7 pcs. Kit DT-HPTU-8X mm High Pressure 8mm Coolant Tubing Only 2 DT-HP90C-8/ High Pressure Quick Release Straight Intec 3 DT-HP90C-8/ High Pressure Quick Release Straight Intec 4 DT-HP0SC-1/8X /8" NPT Straight High Pressure Quick Release Connector 5 DT-HP90CE-1/8X /8" NPT 90 Elbow High Pressure Quick Release Connector 6 DT-HP0SC-6X mm Straight High Pressure Quick Release Connector 7 DT-HP90C-6X mm 90 Elbow High Pressure Quick Release Connector Call: Visit: sales@doriantool.com 77

78 ASCAC Jet-Stream Thru Coolant R/L Toolholder Style A - 0 Side Cutting Edge Angle for 7 positive 80 diamond CC_W inserts Coolant Outlet E METRIC CC_W System HeightLength (Tool Gage Insert Stop) 0º ASCACR/L 1010-H mm CCGW ASCACR/L 1212-H mm CCGW ASCACR/L 1616-H mm CCGW ASCACR/L 1212-H mm CCGW-09T308 ASCACR/L 1616-H mm CCGW-09T308 ASCACR/L 2020-K mm CCGW-09T308 Inch ASCACR/L 08-2A inch CCGW ASCNC Jet-Stream Thru Coolant R/L Toolholder Style N - Negative 5 End or Side Cutting Edge Angle for 7 positive 80 diamond CC_W inserts E Coolant Outlet METRIC CC_W System Stop) (Tool Gage Insert ASCNCR/L 1010-H mm CCGW º ASCNCR/L 1212-H mm CCGW ASCNCR/L 1616-H mm CCGW ASCNCR/L 1212-H mm CCGW-09T308 ASCNCR/L 1616-H mm CCGW-09T308 ASCNCR/L 2020-K mm CCGW-09T308 Inch ASCNCR/L 08-2A inch CCGW ASCNCR/L 08-3A inch CCGW ASDAC Jet-Stream Thru Coolant R/L Toolholder Style A - 0 Side Cutting Edge Angle for 7 positive 55 diamond DC_W inserts Coolant Outlet E METRIC DC_W System HeightLength Stop) (Tool Gage Insert ASDACR/L 1010-H mm DCGW º ASDACR/L 1212-H mm DCGW ASDACR/L 1616-H mm DCGW ASDACR/L 1212-H mm DCGW-11T308 ASDACR/L 1616-H mm DCGW-11T308 ASDACR/L 2020-K mm DCGW-11T308 Inch ASDACR/L 08-3A inch DCGW ASDNC Jet-Stream Thru Coolant R/L Toolholder Style N - 3 Side Cutting Edge Angle for 7 positive 55 diamond DC_W inserts Coolant Outlet E METRIC DC_W System HeightLength Stop) (Tool Gage Insert ASDNCR/L 1010-H mm DCGW º ASDNCR/L 1212-H mm DCGW ASDNCR/L 1616-H mm DCGW ASDNCR/L 1212-H mm DCGW-11T308 ASDNCR/L 1616-H mm DCGW-11T308 ASDNCR/L 2020-K mm DCGW-11T308 Inch ASDNCR/L 08-2A inch DCGW ASDNCR/L 08-3A inch DCGW ASDPC Jet-Stream Thru Coolant Neutral Toolholder Style P Side Cutting Edge Angle for 7 positive 55 diamond DC_W inserts E Coolant Outlet METRIC DC_W System Stop) (Tool Neutral HeightLength Gage Insert ASDPCN 1010-H mm DCGW ASDPCN 1212-H mm DCGW ASDPCN 1212-H mm DCGW-11T308 ASDPCN 1616-H mm DCGW-11T308 Inch ASDPCN 08-3A inch DCGW ASTAC Jet-Stream Thru Coolant R/L Toolholder Style A - 0 Side Cutting Edge Angle for 7 positive triangle TC_W inserts E Coolant Outlet METRIC System HeightLength Stop) (Tool Gage Insert ASTACR/L 1010-H mm TCGW º ASTNC Jet-Stream Thru Coolant R/L Toolholder Style N - 3 Side Cutting Edge Angle for 7 positive triangle TC_W inserts E Coolant Outlet METRIC TC_W System Stop) (Tool Gage Insert ASTNCR/L 1010-H mm TCGW º ASTNCR/L 1212-H mm TCGW ASTNCR/L 1616-H mm TCGW ASTNCR/L 1616-H mm TCGW-16T308 Inch ASTNCR/L 08-2A inch TCGW ASVAB Jet-Stream Thru Coolant R/L Toolholder Style A - 0 Side Cutting Edge Angle for 5 positive 35 diamond VB_W inserts E Coolant Outlet METRIC VB_W System HeightLength Stop) (Tool Gage Insert ASVABR/L 1010-H mm VBGW º ASTACR/L 1212-H mm TCGW ASTACR/L 1616-H mm TCGW ASTACR/L 2020-K mm TCGW Inch ASTACR/L 08-2A inch TCGW ASVABR/L 1212-H mm VBGW ASVABR/L 1212-K mm VBGW ASVABR/L 1616-K mm VBGW ASVABR/L 2020-K mm VBGW Inch ASVABR/L 08-2A inch VBGW ASVABR/L 08-3A inch VBGW Call: Visit: sales@doriantool.com

79 ASVNB Jet-Stream Thru Coolant R/L Toolholder Style N - 3 Side Cutting Edge Angle for 5 positive 35 diamond VB_W inserts E Coolant Outlet METRIC VB_W System HeightLength Stop) (Tool Gage Insert ASVNBR/L 1010-H mm VBGW º ASVNBR/L 1212-H mm VBGW ASVNBR/L 1212-K mm VBGW ASVNBR/L 1616-K mm VBGW ASVNBR/L 2020-K mm VBGW Inch ASVNBR/L 08-2A inch VBGW-221 ASVNBR/L 08-3A inch VBGW-332 ASVNP Jet-Stream Thru Coolant R/L Toolholder Style N - 3 Side Cutting Edge Angle for 11 positive 35 diamond VP_W inserts E Coolant Outlet METRIC VP_W System HeightLength Stop) (Tool Gage Insert ASVNPR/L 1010-H mm VPGW º ASVNPR/L 1212-H mm VPGW ASVNPR/L 1212-K mm VPGW ASVNPR/L 1616-K mm VPGW ASVNPR/L 2020-K mm VPGW Inch ASVNPR/L 08-2A inch VPGW-221 ASVNPR/L 08-3A inch VPGW-332 ASVVB Jet-Stream Thru Coolant Neutral Toolholder Style V Side Cutting Edge Angle for 5 positive 35 diamond VB_W inserts Coolant Outlet E METRIC VB_W 17.5º TYP System Stop) (Tool Neutral HeightLength Gage Insert ASVVBN 1010-H mm VBGW ASVVBN 1212-H mm VBGW ASVVBN 1212-K mm VBGW ASVVBN 1616-K mm VBGW ASVVP Jet-Stream Thru Coolant Neutral Toolholder Style V Side Cutting Edge Angle for 11 positive 35 diamond VP_W inserts Coolant Outlet E METRIC VP_W (Tool HeightLength Gage Insert 17.5º TYP Neutral System Stop) ASVVPN 1010-H mm VPGW ASVVPN 1212-H mm VPGW ASVVPN 1212-K mm VPGW ASVVPN 1616-K mm VPGW ASVAC Jet-Stream Thru Coolant R/L Toolholder Style A - 0 Side Cutting Edge Angle for 7 positive 35 diamond VC_W inserts Coolant Outlet E METRIC VC_W System Stop) (Tool Gage Insert 0º ASVACR/L 1010-H mm VCGW ASVACR/L 1212-H mm VCGW ASVACR/L 1212-K mm VCGW ASVACR/L 1616-K mm VCGW ASE Jet-Stream Thru Coolant Threading Toolholder - and for LayDown Insert Coolant Outlet METRIC E System HeightLength (Tool Stop) ASER/L 1010-H mm ASER/L 1212-H mm Gage Insert 11-A60 ASER/L 1616-H mm G60 ASVNC Jet-Stream Thru Coolant R/L Toolholder Style N - 3 Side Cutting Edge Angle for 7 positive 35 diamond VC_W inserts E Coolant Outlet METRIC VC_W System HeightLength Stop) (Tool Gage Insert ASVNCR/L 1010-H mm VCGW º ASVNCR/L 1212-H mm VCGW ASVNCR/L 1616-H mm VCGW ASVNCR/L 1212-K mm VCGW ASVNCR/L 1616-K mm VCGW ASVNCR/L 2020-K mm VCGW Inch ASVNCR/L 08-2A inch VCGW-221 ASVNCR/L 08-3A inch VCGW-332 ANS Jet-Stream Thru Coolant Threading Toolholder - and for DorNotch V Thread Inserts Coolant Outlet METRIC E System HeightLength (Tool Stop) ANSR/L 1212-H mm ANSR/L 1616-H mm ANSR/L 1212-H mm ANSR/L 1616-H mm Inch Gage Insert NG-2R NG-2L NG-3R NG-3L ANSR/L 08-2A inch NG-2R NG-2L ANSR/L 08-3A inch NG-3R NG-3L Coolant Inlet B ASTVO Jet-Stream Thru Coolant Threading Toolholder- and for On Edge TNMC Inserts ASVVC Jet-Stream Thru Coolant Neutral Toolholder Style V Side Cutting Edge Angle for 7 positive 35 diamond VC_W inserts Coolant Outlet METRIC E VC_W System HeightLength Gage Insert (Tool 17.5º TYP Neutral Stop) ASVVCN 1010-H mm VCGW ASVVCN 1212-H mm VCGW ASVVCN 1212-K mm VCGW ASVVCN 2020-K mm VCGW Coolant Outlet METRIC E System HeightLength (Tool Stop) ASTVOR/L 1010-H ASTVOR/L 1212-H ASTVOR/L 1616-H Inch Gage Insert TNMC-322 ASTVOR/L 08-3A TNMC-322 Call: Visit: sales@doriantool.com 79

80 ASGTH Jet-Stream Thru Coolant Cut-Off Toolholder - and for SGTN Cut-Off Inserts for Swiss Screw Machines METRIC E Max. Insert Size System Height Length (Tool Stop) Dia. Gage Insert Coolant Outlet ASGTHR/L 1010-H mm E ASGTHR/L 1212-H mm ASGTHR/L 1616-H mm ASGTHR/L 2020-K mm ASGTHR/L 2525-K mm ASGTHR/L 1010-H mm ASGTHR/L 1212-H mm ASGTHR/L 1616-H mm ASGTHR/L 2020-K mm ASGTHR/L 2525-K mm Inch ASGTHR/L 08-2A inch ASGTHR/L 16-2C inch ASGTHR/L 08-3A inch ASGTHR/L 16-3C inch SGTN-2.0 SGTN-3.0 SGTN-2.0 SGTN-3.0 ADDN Jet-Stream Thru Coolant External Turning, Grooving & Cut-off Toolholders METRIC E Grooving Max. System Insert Size Coolant Outlet Height Length (Tool Stop) Max. Dia. Insert ADDN-TFR/L-1010-H mm DN_-22_N-20 Dia. Grooving Max ADDN-TFR/L-1212-H mm DN_-22_N-20 ADDN-TFR/L-1212-H mm DN_-22_N-30- ADDN-TFR/L-1616-H mm DN_-22_N-20 ADDN-TFR/L-1616-H mm DN_-22_N-30- ADDN-TFR/L-2020-K mm DN_-22_N-20 ADDN-TFR/L-2020-K mm DN_-22_N-30- Inch ADDN-TFR/L-08-20A inch DN_-22_N-20 ADDN-TFR/L-08-30A inch DN_-22_N-30- ADDN Jet-Stream Thru Coolant External Turning, Grooving & Cut-off Toolholders METRIC E Grooving Max. Insert Size System Height Length (Tool Stop) Max. Dia. Insert Coolant Outlet ADDN-TFR/L-1010-H mm DN_-22_N-20 Dia. Grooving Max ADDN-TFR/L-1212-H mm DN_-22_N-20 ADDN-TFR/L-1212-H mm DN_-22_N-30- ADDN-TFR/L-1616-H mm DN_-22_N-20 ADDN-TFR/L-1616-H mm DN_-22_N-30- ADDN-TFR/L-2020-K mm DN_-22_N-20 ADDN-TFR/L-2020-K mm DN_-22_N-30- Inch ADDN-TFR/L-08-20A inch DN_-22_N-20 ADDN-TFR/L-08-30A inch DN_-22_N-30- ADDN Jet-Stream Thru Coolant External Turning, Grooving & Cut-off Toolholders METRIC Insert Coolant Outlet System Size Height Length Dia. Grooving Max E Grooving (Tool Stop) Max. ADDN-TFR/L-1010-H mm DN_-22_N-20 ADDN-TFR/L-1212-H mm DN_-22_N-20 ADDN-TFR/L-1616-H mm DN_-22_N-20 ADDN-TFR/L-1616-H mm DN_-22_N-30- ADDN-TFR/L-2020-K mm DN_-22_N-20 ADDN-TFR/L-2020-K mm DN_-22_N-30- Inch ADDN-TFR/L-08-20A inch DN_-22_N-30- Max. Dia. Insert 80 Call: Visit: sales@doriantool.com

81 KNURLING TOOLS From the Knurling Tool Specialists for CNC & Manual Lathes

82 Knurling Tool Applications Form for Manual & CNC Machines If your knurling application is not in the chart, please supply prints and information. Knurling Application Knurling Tool Recommendation Knurling Application Knurling Tool Recommendation CNC109-_-M CNC-_5-O Diamond to a Shoulder BEST BETTER GOOD Straight to a Shoulder BEST BETTER GOOD 3WKT-_-2 SSCK-_-DW SFKT KTW109-_-4 SCNC-_-6-2 SFKT-_-_ KTW109-_-4 SCNC-_-6-2 3WKT-_-_ CNC-_-6-4 SSWFKT CNC109-_-4 CNC-_-6-4 CNC109-_-4 SSCK Diamond Band BEST BETTER GOOD Small Diameter Diamond BEST BETTER GOOD SCNC-_-7-D- SCKN-_-DW-_ FKT-_-_ Shoulderless 3WKT-_-_ SCNC-_-7-D Straight Band CNC-_-7-R 3SHKT-_- SWFKT-_-_ CNC-_-7-R KTM109-_-M KTO109-_-O CNC109-_-M CNC-_-4-M CNC-_-5-O Small Diameter Straight Shoulderless Small Diameter Diamond to a Shoulder 3WKT-_-2 BEST BETTER GOOD Taper Diamond BEST BETTER GOOD Special Small Diameter Straight to a Shoulder Taper Straight Diamond Crest BEST BETTER GOOD Internal Diamond BEST BETTER GOOD Straight Crest SCNC-_-7-D SCKN-_DW-_ FKT-_-_ CNC-_-7-R 3SHKT-_- SWFKT-_-_ KTM109-_-M CNC-_-4-M KTO109-_-O CNC-_-5-O CNC109-_-M Internal Straight Diamond Shoulderless BEST BETTER GOOD Straight Shoulderless BEST BETTER GOOD SCNC-_-1-2 SCNC-_-7-D SCKN-_-DW-_ SCNC-_7-D 107ST-_ FKT-_-_ CNC-_-1-2 CNC-_-7-R 3SHKT-_- CNC-_7-R 107ST-_ SWFKT-_-_ CNC-_-2-R KTM109-_-M CNC-_-4-M KTM109-_-M CNC-_4-M CNC-_-3-M KTO109-_-O KTO109-_-O SCKN-_-DW-_ 3WKT-_-M 3WKT-_-_ 3SHKT-_- TIKT-_- SIKT-_- Radio Face BEST BETTER GOOD Milling Diamond BEST BETTER GOOD Special MMKT-_-_ Milling Straight 82 Call: Visit: sales@doriantool.com

83 Knurling Tool Applications Form for Manual & CNC Machines Figure 1 - Full Knurling Knurl Wheel Identification Edge Prep CD KP DAK DBK RE KL Straight Diagonal Diagonal Diamond Diamond Full Beveled Knurl Male Female Faced Edge WL Figure 2 - Band Knurling CD KP Knurl Pitch TPI Is the number of teeth per inch Circular Pitch Is the distance between tooth to tooth Diametral Pitch Is the number of teeth per inch of diameter DAK DBK RE BKL1 BKL2 FE P (Metric Pitch and Inch Pitch) α WL 1.0 TPI (Teeth per inch) Figure 3 - Shoulder Knurling CD KP DAK DBK SD Knurling Specification Fill out as applicable SKP Straight Knurl DKPM Diamond Knurl Male RE KL FE DKPR Diagonal Knurl DKPF Diamond Knurl Female WL DKPL Diagonal Knurl Fill Knurling Dimension KP Knurl Pitch Inch TPI AP % of Knurl Depth Figure 4 - Crest Knurling DP CD KP Metric P-mm DBK Diameter (Blank) Before Knurling FE Front End Distance D1 DAK DBK DAK Diameter After Knurling RE Rear End Distance KL Knurling Length CD Chuck Distance RE KL FE BKL1 Band Knurling Length 1 SD Shoulder Diameter BKL2 Band Knurling Length 2 D1 Shoulder Diameter WL WL Workpiece Length Call: Visit: sales@doriantool.com 83

84 Knurling Tool Applications Form for Manual & CNC Machines Figure 5 - ID Internal Knurling SKL Knurling Specification Fill out as applicable TID True Internal Diameter SKL Shoulder Knurling Length SID Shoulder Internal Diameter KP Knurl Pattern TID SID TKL True Knurling Length PI Knurl Pitch Inch TPI DP TKL KP Metric P-mm Figure 6 - Face Knurling Knurling Specification KP Fill out as applicable ID Inside Diameter OD Outside Diameter KP Knurl Pattern PI Knurl Pitch Inch TPI ID OD DP Metric P-mm TKL Figure 7 - Taper Knurling Knurling Specification KP Fill out as applicable D Small Diameter D1 Large Diameter KP Knurl Pattern PI Knurl Pitch Inch TPI D D1 DP Metric P-mm Figure 8 - Milling Knurling Knurling Specification KP KW Fill out as applicable KW Knurling Width KP Knurl Pattern KL Knurling Length PI Knurl Pitch Inch TPI DP Metric P-mm KL Knurling Production Information Material Annealed Heat Treated Knurling Tool Recommendation Customer Information Figure Dorian Tool Recommendation Quantity Hardness Date Item UPC Price Delivery Company Knurling Tool Machine Manual CNC Swiss Other Tool holder Style Tool holder Size Contact Telephone Knurling Head Knurling Wheel Knurling Pin 84 Call: Visit: sales@doriantool.com

85 For Best Knurling Results 1. Diameter of part being knurled should be turned to size and concentric to achieve a good knurling quality. 2. Knurl wheels must be exactly in center line with the work piece for an even knurl pattern. 3. Knurl wheels are to run freely and the knurl pin must be secured on the tool holder (the use of a carbide pin is recommended). 4. Use heavy flow of coolant to keep the knurl wheels cool and clean. 5. There are formulas to calculate depth of cut, tracking pitch and cutting parameter. Because of different material hardness, before starting production follow the instructions and with trial error the best result will be achieved. Speed and Feeds For in-feed knurling, the knurl should be fed toward the work gradually until contact is made with the blank. This can be completed within 5 to 25 work revolutions of the working piece. For end-feed knurling, the feeds used with the turret vary considerably and are dependent on the pitch of the knurl, the material, the diameter of the work blank, and the hardness being knurled. Knurling is ordinarily performed at the same speeds used as cutting operations. Use the same SFM used for high speed and cobalt tool bits to calculate speeds and feeds. However, where spindle speeds can be reduced without loss of production, it is recommended that spindle speeds be lowered as much as possible to increase knurl life. For Best Knurling Performance Before beginning Knurling process check: - Diameter before knurl - Diameter after knurl - Knurl pitch - Workpiece to be concentric - Set wheels on center line of workpiece - Use beveled edge wheels when form knurling - Use full faced wheels when cut knurling - Always use coolant when knurling - The standard knurling depth is 35% of knurl circular pitch. Example: Knurling Depth of 20 TPI Knurl Circular Pitch of 20TPI is: 1.000/20=.050 Knurling Depth is:.050 x.035% =.0175 per side - If the knurl double tracks, the knurl wheel is not deep enough in to workpiece, increase knurling depth - If the knurl crest rolls over, the knurl wheel is to deep in to the workpiece, decrease knurling depth - If the knurl is not tracking, the workpiece diameter is not correct for full number of teeth, diameter must adjusted up or down by using a tracking formula. In-Feed Knurling, when the knurl wheel enter into the workpiece radially. Once the knurl wheel has reached the depth, will take from 5 to 20 revolutions to complete the knurling operation. The revolution changes for the same size with the workpiece material hardness and knurl pitch. End-Feed Knurling, when the knurl wheel enter into the workpiece axially. The depth of the knurl wheel must be set before the wheel get in contact with the workpiece, the depth and pressure changes for the same size with the workpiece material hardness and knurl pitch. Knurling Speeds and Feeds Material and Knurl Pitch Knurl Forming Knurl Cutting P (Metric Pitch and Inch Pitch) α 1.0 TPI (Teeth per inch) Material Material Specs Low carbon steel Alloy Steel Tool steels D2 Stainless Steel Aluminum Brass Plastic 6061 C360 Delrin TPI Metric Pitch >14 >1, ,6-1, ,0-0,7 40> 0,6> >14 >1, ,6-1, ,0-0,7 40> 0,6> >14 >1, ,6-1, ,0-0,7 40> 0,6> >14 >1, ,6-1, ,0-0,7 40> 0,6> Forming Speed (SFM and V c ) Feed rate (f n ) Cutting Speed End Feed Smaller Wheel dia. Larger End Feed In Feed Smaller Wheel dia. Larger SFM [15-63 V c m/min] SFM [10-45 m/min] SFM [10-45 m/min] SFM [ m/min] 0.006" [0,15mm] 0.008" [0,20mm] 0.010" [,25mm] 0.012" [,30mm] 0.004" [,10mm] 0.005" [,13mm] 0.007" [,18mm] 0.009" [,23mm] 0.004" [,10mm] 0.005" [,13mm] 0.007" [,18mm] 0.009" [,23mm] 0.008" [,20mm] 0.010" [,25mm] 0.013" [,33mm] 0.017" [,43mm] " [,025-,075mm] " [0,050-,100mm " [,050-,100mm] " [,050-,100mm] " [,025-,050mm] " [,025-,075mm] " [,025-,075mm] " [,025-,075mm] " [,025-,050mm] " [,025-,075mm] " [,025-,075mm] " [,025-,075mm] " [,050-,100mm] " [,075-,125mm] " [,075-,125mm] " [,075-,125mm] SFM [ m/min] SFM [21-75 m/min] SFM [21-75 m/min] SFM [ m/min] 0.009" [,23mm] 0.011" [,28mm] 0.013" [,33mm] 0.015" [,38mm] 0.007" [,18mm] 0.008" [,20mm] 0.010" [,25mm] 0.012" [,30mm] 0.007" [,18mm] 0.008" [,20mm] 0.010" [,25mm] 0.012" [,30mm] 0.011" [,28mm] 0.013" [,33mm] 0.016" [,40mm] 0.020" [,50mm] Note: When knurling, start with low Cutting speed, to evaluate the wheel performance, (to avoid the premature life of the wheel) increase until optimum cutting speed and feed is achieved Call: Visit: sales@doriantool.com 85

86 Forming Knurling Versus Cutting Knurl - In Forming Knurl, the knurl wheel's axis is set parallel to the workpiece axis, and forced against workpiece displacing the material to form the knurl pattern - A large amount of pressure is required to displace the material that forms the knurl pattern, and pressure increases with workpiece diameter, pitch size and hardness - In a large workpiece diameter, large knurl pitch, and hard material, a multi knurling pass may be required to achieve the correct knurl pattern - For best performance and quality in Forming Knurl, when possible, a Straddle Knurling Tool is to be used, the pressure is divided within the knurl wheels over the workpiece, and pressure against the spindle of the machine is totally neutralized. - Use beveled edge wheel when knurl forming to protect the edge from chipping and for smooth knurling surface. - Use full face Knurled wheel when knurl cutting, the knurl wheels axis are set on negative angle, the sharp edge will cut the knurl pattern into the workpiece - In cutting knurl, less pressure is required for the operation, higher speed and feed can be used, (use the same cutting date of High Speed or Cobalt turning tools) - Use full faced knurl wheel when knurl cutting. Use Forming Knurl Tool for: - Small to medium workpiece diameter Use Cutting Knurl Tool for: - Medium to large workpiece diameter Two Ways to Achieve Knurling (1) Forming Knurl forming is achieved by pushing the knurl wheels against the blank while rotating. This will cause the material to be displaced in cold form, reproducing the same wheel pattern on the blank circumference. The blank is increased accordingly to the Knurl Pitch. The force applied through forming is increased in larger diameters making knurling difficult and slow. Use beveled edge wheel when knurl forming to protect the edge from chipping and for smooth knurl surface. (2) Cutting Knurl cutting is achieved by using knurl wheels to actually cut instead of forming the blank. The knurl wheels are set at an angle, making the knurling edges of the knurl wheels cut into the blank. Pressure is minimized while speed and feed are increased. - To the shoulder knurling - For centerless workpiece - For band knurling application - When high surface finish required - For shoulderless diameter knurling - For hard workpiece materials - For long knurl application with live center - For higher productivity Use full face Knurled wheel when knurl cutting, the knurl wheels axis are set on negative angle, the sharp edge will cut the knurl pattern into the workpiece Common Knurling Problems Problem Cause Solution Knurling double tracking 1) Knurl wheel not deep enough into the workpiece 2) The circumference of the workpiece blank is a not full multiple of the knurl pitch 1) Increase the depth of the knurl wheel into the workpiece 2) Change the blank diameter +/-.005 (.127mm) or use the tracking formula Knurling flacking or slivered Knurl destruction Knurl wheel poor life Uneven depth of knurl Twisted knurl pattern Uneven Knurl Pattern 1) Knurling a workpiece material with scaling or rough surface 2) Over-rolling the knurl wheel into the workpiece when in-feed knurling 3) Knurl Wheel too deep into the workpiece when end-feeding 4) Using 1:1 knurl to workpiece ratio 1) Knurling a workpiece material with scaling or rough surface 2) Over-rolling the knurl wheel into the workpiece when in-feed knurling 3) Knurl Wheel too deep into the workpiece 4) Use of sharp full faced knurl wheel when knurl forming 1) Knurling a workpiece material with scaling or rough surface 2) Over-rolling the knurl wheel into the workpiece when in-feed knurling 3) Knurl Wheel too deep into the workpiece when end-feeding 4) Workpiece material too hard, or difficult to knurl (stainless steels and high temp alloys) 5) Workpiece not running concentric 6) Workpiece too hard 7) Knurl wheel not properly hardened 8) Poor lubrication 9) Not using the correct knurl wheel for the application 10) Knurl wheel not beveled 1) Knurling a workpiece material with scaling or rough surface 2) Workpiece not running concentric 3) Using 1:1 knurl to workpiece ratio 1) Knurl wheel not deep enough into the workpiece 2) The circumference of the workpiece blank is not a full multiple of the knurl pitch 1) Knurl wheels are not in centerline of the workpiece 1) Turn the scaling or the rough surface of workpiece into a smooth surface 2) When in-feed knurling, reduce the depth of the knurl wheel, or reduce the number of revolutions after the knurl wheel has reached knurling depth 3) When end-feeding, reduce the depth of the knurl wheel 4) Use larger or smaller diameter wheel 1) Reduce the depth of the knurl wheel 2) Reduce the number of revolutions after the knurl wheel has reached knurling depth 3) Reduce feed and speed and improve coolant flow 4) Use beveled edge when form knurling 1) Turn the scaling or the rough surface of workpiece into a smooth surface 2) When in-feed knurling, reduce the depth of the knurl wheel, or reduce the number of revolutions after the knurl wheel has reached knurling depth 3) When end-feeding, reduce the depth of the knurl wheel 4) Reduce feed and speed and improve coolant flow 5) Turn workpiece concentric and into a smooth surface 6) Reduce workpiece speed 7) Change the knurl wheel 8) Improve coolant flow 9) Use beveled knurl wheel(s) when forming knurling; use full faced knurl wheel(s) for cutting knurling 10) Use a beveled knurl wheel 1) Turn the scaling or the rough surface of workpiece into a smooth surface 2) Turn workpiece concentric and into a smooth surface 3) Use larger or smaller diameter wheel 1) Increase the depth of the knurl wheel 2) Change the blank diameter +/-.005 (.127mm) or use the tracking formula 1) For a symmetric and even knurl pattern on the workpiece, the knurl wheels must to be set on centerline properly 86 Call: Visit: sales@doriantool.com

87 Reversible Cutting direction Versatility Multi diameter diamond knurling cutting style Reversible Head for or knurling. Heavy duty knurl cutting and knurl forming Double Wheel forming knurling head Straddle forming knurling head Shoulder forming knurling head Wide diameter range for small diameter to large diameter parts Modular Three shank sizes interchangeable with seven knurling heads. Adjustable Dovetail knurling head locking system. Quick and precise center line setting. Knurling wheel angle stationary for diamond cutting Two Ways to Knurl Forming (four heads available) Knurl forming action (material displacement by means of rolling) is generally for special application. It creates a better quality of knurl pattern, but speeds and feeds are sacrificed for this quality. The force applied through forming is increased in larger diameters making knurling difficult and slow. Cutting (three heads available) Knurl cutting action cuts a perfect knurl pattern 10 to 20 times faster than any conventional knurling tool. It is engineered to knurl any material, including thin wall tubing, with minimum stress to the spindle and work piece. Knurl cutting action speeds up knurling enough to become applicable for CNC use. CNC M used for examples. Call: Visit: sales@doriantool.com 87

88 Knurling Tools Cutting Operation Adjustment Screw Starting Cutting Knurl 1) Touch the workpiece diameter with the knurl wheels. Locking Screws Mounting to the Machine Clamp the shank at right angles to the axial center line of the machine. The knurl wheels of the knurling tool head should be set exactly on center. To adjust center-height: 1. Loosen the lock screws. 2. Turning the adjustment screw adjusts the head up or down. 3. Turn adjustment screw until the center height is aligned. 4. Lock head back in place by tightening the lock screws. 2) Move the knurling wheel to the end of the workpiece Set the cutting depth of the wheel (35% of the circular pitch) Start knurl Knurling Adjustment Set Up With the machine spindle rotating slowly, in-feed (Plunge) the tool to make a slight impression for the full width of the cutter. This impression should be equal on both wheels when using Diamond Knurling Head. Misaligned patterns can be corrected by turning the fine adjustment screw in opposite directions. 3) Use recommended cutting parameters Use coolant Knurling head center line adjustments R.H. Spiral Knurling tool is too low from center line. Top wheel is cutting a deeper R.H. Diagonal Knurl. Turn the Fine Center Adjustment Screw until both wheels are on center and touching simultaneously. Full Faced Cutting Knurl Wheel When cut knurling, a full faced knurl wheel must be used. The edge of the knurl wheel will be cut into the material to be knurled. A sharp edge must be kept to cut a clean and smooth knurl pattern. The knurl wheel can be reground once the edge is dull or chipped. Edge Prep Full Faced L.H. Spiral Knurling tool is too high from center line. Bottom wheel is cutting a deeper L.H. Diagonal Knurl. Turn Fine Center Adjustment Screw until both wheels are on center and touching simultaneously. Wheel Grinding When the cutting edges of the knurl wheel become dull, resharpen them by grinding the cutting face of both wheels evenly. You can also grind forming wheels to desired width, but bevel afterwards. Diamond Knurl Tool is on center line. Both wheels are touching simultaneously, cutting a perfect diamond knurl. Grind to the Thrustwasher Diameter R & M SERIES KNURL WHEEL Grind Cutting Face Only SW SERIES KNURL WHEEL 88 Call: Visit: sales@doriantool.com

89 Easy to set up Simple to operate. To minimize set up time of knurling application, and simplify the knurling operation, the CNC Modular Knurling Tool has been engineered to create a diamond knurling pattern, without the need of reseting the knurl wheels every time the workpiece diameter changes. To cover the full range of diameter three modular cutting knurling head have been developed. 1) Small diameter modular head 2) Medium diameter modular head 3) Large diameter modular head Small Diameter Head Cutting Range Small Diameter Cutting Range from 1/2 to 1-1/2 End feed range:.004 to.012 Knurl cutting action Diamond Cutting Twin straight SW series knurl wheels for male diamond pattern Supplied with Full Faced SW2S-30-HS knurl wheels - TiN coated Medium Diameter Head Medium Diameter Cutting Range from 1 to 5 End feed range:.004 to.016 Knurl cutting action Diamond Cutting Two straight R series knurl wheels for male diamond pattern Supplied with Full Faced RS-25-HS knurl wheels - TiN coated Large Diameter Head Large Diameter Cutting Range from 2 & up End feed range:.004 to.025 Knurl cutting action Diamond Cutting Two straight M series knurl wheels for male diamond pattern Supplied with Full Faced MS-25-HS knurl wheels - TiN coated How the diamond CNC Modular Knurling tool works. 1) Choose the cutting diameter range of the knurl head 2) Set the knurling wheel on centerline of the workpiece 3) Touch the workpiece diameter with the knurl wheels. 4) Set the depth of cut (35% of the circle pitch) 6) Start to cut according to recommended cutting parameters Call: Visit: sales@doriantool.com 89

90 1 Light Duty 60º Diamond Cutting Modular Knurling Head - CNCKH-1-2 Cutting Small Diameter Cutting Range 1/2 to 1-1/2 End feed range:.004 to.012 Knurl cutting action Twin straight SW series knurl wheels for male diamond pattern Supplied with Full Faced SW2S-30-HS knurl wheels - TiN coated 2 Heavy Duty 60º Diamond Cutting Modular Knurling Head - CNCKH-2-R Cutting Medium Diameter Cutting Range 1 to 5 End feed range:.004 to.016 Knurl cutting action Two straight R series knurl wheels for male diamond pattern Supplied with Full Faced RS-25-HS knurl wheels - TiN coated 3 Extra Heavy Duty 60º Diamond Cutting Modular Knurling Head - CNCKH-3-M Cutting Large Diameter Cutting Range 2 & up End feed range:.004 to.025 Knurl cutting action Two straight M series knurl wheels for male diamond pattern Supplied with Full Faced MS-25-HS knurl wheels - TiN coated 4 Double Wheel Forming Knurling Modular Head - CNCKH-4-M Forming Diameter Range 5/16 & up End feed range:.004 to.012 Knurl Forming action Two M series knurl wheels for straight or diamond pattern Supplied with Beveled MDR/L-25-HSB knurl wheels - TiN coated 3 Modular Sizes 7 Modular Heads Flexibility Multiple combinations Multiple applications Better performance Designed for the CNC Lathe Precision square shank with preset center height or hand applications Interchangeable shanks & heads High Speed knurl wheels (TiN coated) Supplied with heavy duty parts 5 Single Wheel Forming Modular Knurling Head - CNCKH-5-O Forming 6 Shoulder Forming Modular Knurling Head - CNCKH-6-4 Forming Straight Bump Unlimited Diameter End feed range:.004 to.012 Knurl forming action Single O series knurl wheel for straight or diamond pattern Supplied with Beveled OS-25-HSB knurl wheel - TiN coated Diameter Range 5/16 & up End feed range:.004 to.012 Knurl forming action Two SW series knurl wheels for straight or diamond pattern Supplied with Beveled SW4R/L-25-HSB knurl wheels - TiN coated 7 Straddle Forming Modular Knurling Head - CNCKH-7-R Forming Diameter Range up to 1 End feed range:.004 to.012 Knurl forming action Two R series knurl wheels for straight or diamond pattern Supplied with Beveled RDR/L-30-HSB knurl wheels - TiN coated 90 Call: Visit: sales@doriantool.com

91 1 Light Duty 60º Diamond Cutting Modular Knurling Head + CNC Modular Knurling Tool Knurl Pin Set Size Tool Length Knurl Wheel Modular Head CNC " 6 7/8" Cutting CNC " 6 7/8" Series SW2 SW2.0P-2S CNCKH-1-2 CNC /8" Supplied with a set of Full Faced straight high speed TiN coated knurl wheels, 30 TPI (.8mm) for a male diamond pattern. 2 Heavy Duty 60º Diamond Cutting Modular Knurling Head + CNC Modular Knurling Tool Cutting Knurl Pin Set Size Tool Length Knurl Wheel Modular Head CNC-75-2-R " 6 7/8" CNC R " 6 7/8" Series R KPS C CNCKH-2-R CNC R /8" Supplied with a set of Full Faced straight high speed knurl wheels, 25 TPI (1mm) for a male diamond pattern. 3 Extra Heavy Duty 60º Diamond Cutting Modular Knurling Head + CNC Modular Knurling Tool Knurl Pin Set Size Tool Length Knurl Wheel Modular Head CNC-75-3-M " 7" Cutting CNC M " 7" Series M KPS C CNCKH-3-M CNC M /2" Supplied with a set of Full Faced straight high speed TiN coated knurl wheels, 25 TPI (1mm) for a male diamond pattern 4 Double Wheel Forming Modular Knurling Head + CNC Modular Knurling Tool Knurl Pin Set Size Tool Length Knurl Wheel Modular Head CNC-75-4-M " 7" CNC M " 7" Series M KPS C CNCKH-4-M Forming CNC M /2" Supplied with a set of Beveled diagonal high speed beveled TiN coated knurl wheels, 25 TPI (1mm) for a male diamond pattern. 5 Single Wheel Forming Modular Knurling Head + CNC Modular Knurling Tool Knurl Pin Set Size Tool Length Knurl Wheel Modular Head CNC-75-5-O " 6 3/4" CNC O " 6 3/4" Series O KPS C CNCKH-5-O Forming CNC O /4" Supplied with one Beveled straight high speed beveled TiN coated knurl wheel, 25 TPI (1mm) for a straight pattern 6 Shoulder Forming Modular Knurling Head + CNC Modular Knurling Tool Forming Size Tool Length Knurl Wheel CNC " 6 3/4" CNC " 6 3/4" Knurl Pin Set Modular Head Series SW4 SW4.0P-2S CNCKH-6-4 CNC /4" Supplied with a set of Beveled diagonal high speed beveled TiN coated knurl wheels, 25 TPI (1mm) for a male diamond pattern. 7-R Straddle Forming Modular Knurling Head + CNC Modular Knurling Tool Forming Size Tool Length Knurl Wheel CNC-75-7-R " 7 3/8" CNC R " 7 3/8" Knurl Pin Set Modular Head Series R KPS C CNCKH-7-R CNC R /8" Supplied with a set of Beveled diagonal high speed beveled TiN coated knurl wheels, 30 TPI (.8mm) for a male diamond pattern. Call: Visit: sales@doriantool.com 91

92 1 SMALL Light Duty 60º Diamond Cutting Modular Knurling Head - SCNCKH-1-2 Cutting Small Cutting Range 1/2 to 1-1/2 End feed range:.004 to.012 Knurl cutting action Twin straight SW series knurl wheels for male diamond pattern Supplied with full faced SW2S-30-HS knurl wheels - TiN coated 3 Modular Sizes 3 Modular Heads Flexibility Multiple combinations Multiple applications Better performance Designed for the CNC Lathe Precision square shank with preset center height or hand applications Interchangeable shanks & heads High Speed knurl wheels (TiN coated) Supplied with heavy duty parts 6 SMALL Shoulder Forming Modular Knurling Head - SCNCKH-6-2 Forming Diameter Range 1/4 & up End feed range:.004 to.012 Knurl forming action Twin SW series knurl wheels for straight or diamond pattern Supplied with beveled SW2R/L-25-HSB knurl wheels - TiN coated 7-R SMALL Straddle Forming Modular Knurling Head - SCNCKH-7-D Forming Diameter Range up to 5/8 End feed range:.004 to.012 Knurl forming action Twin D series knurl wheels for straight or diamond pattern Supplied with beveled DR/L-30-HSB knurl wheels - TiN coated 92 Call: Visit: sales@doriantool.com

93 1 SMALL Light Duty 60º Diamond Cutting Modular Knurling Head + SMALL CNC Modular Knurling Tool Size Tool Length Knurl Wheel Knurl Pin Set Modular Head SCNC /8" 4" Cutting SCNC /2" 4-1/4" Series SW2 SW2.0P-2S SCNCKH-1-2 SCNC /8" 4-1/4" Supplied with a set of Full Faced straight high speed TiN coated knurl wheels, 30 TPI (.8mm) for a male diamond pattern 6 SMALL Shoulder Forming Modular Knurling Head + SMALL CNC Modular Knurling Tool Size Tool Length Knurl Wheel Knurl Pin Set Modular Head SCNC /8" 4" Forming SCNC /2" 4-1/4" Series SW4 SW2.0P-2S SCNCKH-6-2 SCNC /8" 4-1/4" Supplied with a set of Beveled diagonal high speed TiN coated knurl wheels, 25 TPI (1mm) for a male diamond pattern 7-R SMALL Straddle Forming Modular Knurling Head + SMALL CNC Modular Knurling Tool Size Tool Length Knurl Wheel Knurl Pin Set Modular Head Forming SCNC-37-7-D /8" 4-1/2" SCNC-50-7-D /2" 4-3/4" SCNC D /8" 4-3/4" Series D KPS C SCNCKH-7-D Supplied with a set of Beveled diagonal high speed TiN coated knurl wheels, 30 TPI (8mm) for a male diamond pattern Call: Visit: sales@doriantool.com 93

94 Center Height Adjustment Screw T L2 H C.H. S Lock Screw x3 L1 G CNC Modular Knurling Tool C.H. & S G H L1 L2 T CNC-75* " CNC-100* " CNC-125* " * Supplied with lock screw set and adjustment screw ** One (1) set includes three (3) lock screws Adjustment Screw Lock Screw Set of 3 CNC CNC-1024** Lock Screw X1 Adjustment Screw H C.H. L2 L1 T S G Easy set-up High productivity Best knurl quality Long knurl wheel life Low production cost Specifically designed for the CNC Lathe Precision square shank with preset center height or hand applications s and heads are all interchangeable High Speed knurl wheels (TiN coated) Carbide knurl pin Center height adjustment CNC Small Modular Knurling Tool C.H. & S G H L1 L2 T Adjustment Screw Lock Screw SCNC-37* " SCNC-50* " SCNC SCNC SCNC-162* " * Modular shank supplied with adjustment screw and screw lock 94 Call: Visit: sales@doriantool.com

95 Straddle Style Forming Knurling Tools A diametral adjustment screw regulates the depth of the knurl pattern and the diameter size. The floating head will allow the knurl wheel to self adjust on the work piece - even when the work piece is not perfectly concentric. The tool can be used for twin wheel applications or single wheel knurling applications. This tool comes with a square shank to be used on open slot tool holders, or on a turret, with a preset center height adjustment which will meet the fixed center height of the CNC and the turret lathe. Body and shank are made of heat-treated, precision ground alloy steel. The dovetail guide ensures the most precise accuracy and rigidity for infinite diameter settings. Heavy Duty Style Forming Knurling Tool Straddle application is best when pressure and deflection are a problem. The knurling arms are able to "float" somewhat and center on the workpiece, compensating for any off-centering. It has been developed to make a perfect knurling pattern without putting any pressure on the spindle or on the lathe compound. Uses 2 straight wheels for straight pattern Uses 2 wheels for 60º diamond pattern 1 Diagonal left 1 Diagonal right Bump application is best for narrow knurling applications. The knurling arms are moved closer together so that the tool can "bump" against the side of the working part with two wheels touching the part. Single wheel application is best for narrow and quick knurling setup. The knurling arms are moved up so that the bottom knurling wheel is locked on center and can "bump" against the side of the working part. With one wheel touching the part, this configuration allows for a quicker setup and knurling of narrow knurling applications. Knurl wheels are supported in a flanged nest to offer best rigidity to handle heavy duty knurling. The knurl wheels are mounted between thrust washers to insure a smooth and even rotation while knurling is performed. Shoulder Style Forming Knurling Tool Straddle application is best when pressure and deflection are a problem. The knurling arms are able to "float" somewhat and center on the workpiece, compensating for any off-centering. It has been developed to make a perfect knurling pattern without putting any pressure on the spindle or on the lathe compound. Uses 2 straight wheels for straight pattern Uses 2 wheels for 60º diamond pattern 1 Diagonal left 1 Diagonal right Designed to knurl against a square shoulder. The knurl wheels are mounted on a thrust washer to insure a smooth and even rotation while knurling is performed. The wheels are held at slight pitch to the work part for better end feeding (feeding across the part towards the chuck). Knurling Tool Mounting Standard Tool CNC Side Mounting T Set Screw Knurl Wheel Locking Shim For Standard to Mounting T Set Screw Knurl Wheel Locking Shim For restricted indexing clearance of the CNC Turret Call: Visit: sales@doriantool.com Knurl Locking Screws 95 Pin Set

96 Self Centering Forming KTM109 Heavy Duty Style Straddle Square Knurling Tool Reversible Direction Diameter Knurl Arm Set Knurl Wheel Range*** Supplied Optional Size KTM M M* W M W KTM M *** M* W M W KTM M M* W M W KTM M M* W M W KTM M *** M* W M W KTM M M* W M W * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels for a male diamond pattern, 25 TPI ***Warning: This tool has the capability to adjust the wheels until they touch, but physically applying a knurl on small diameters may not be possible Self Centering Shoulder Forming KTW109 Shoulder Style Straddle Square Forming Knurling Tool Reversible Direction Diameter Knurl Arm Set Knurl Wheel Range*** Supplied Optional Size KTW SW4* W W M KTW ** SW4* W W M KTW SW4* W W M KTW SW4* W M W KTW *** SW4* W M W KTW SW4* W M W * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels for a male diamond pattern, 25 TPI ***Warning: This tool has the capability to adjust the wheels until they touch, but physically applying a knurl on small diameters may not be possible Self Centering Forming KTO Heavy Duty Style Straddle Square Knurling Tool Reversible Direction Diameter Knurl Arm Set Knurl Wheel Range*** Supplied Optional Size KTO O O* W O W ** KTO O O* W O W * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels for a male diamond pattern, 25 TPI ***Warning: Physically applying a knurl on small diameters may not be possible Self Centering Shoulder Forming KTW Shoulder Style Straddle Square Knurling Tool Reversible Direction Diameter Knurl Arm Set Knurl Wheel Range*** Supplied Optional Size KTW SW4* W W O ** KTW SW4* W W O * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels for a male diamond pattern, 25 TPI ***Warning: Physically applying a knurl on small diameters may not be possible Self Centering Forming CNC109-M Side Mount Flange Style Square Knurling Tool Diameter Knurl Arm Set Knurl Wheel Range*** Supplied Optional Size CNC M-R/L M* W M W CNC M-R/L *** M* W M W CNC M-R/L M* W M W CNC M-R/L M* W M W CNC M-R/L *** M* W M W CNC M-R/L M* W M W * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels, 25 TPI *** Warning: This tool has the capability to adjust the wheels until they touch, but physically applying a knurl on small diameters may not be possible Self Centering Shoulder Forming CNC109-4 Side Mount Shoulder Style Square Knurling Tool Diameter Knurl Arm Set Knurl Wheel Range*** Supplied Optional Size CNC R/L SW4* W W M CNC R/L *** SW4* W W M CNC R/L SW4* W W M CNC R/L SW4* W W M CNC R/L *** SW4* W W M CNC R/L SW4* W W M * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels, 25 TPI *** Warning: This tool has the capability to adjust the wheels until they touch, but physically applying a knurl on small diameters may not be possible 96 Call: Visit: sales@doriantool.com

97 Self Centering Forming SCKN - Self-Centering Knurling Tool HDSCKN Heavy Duty Self-Centering Knurling Tool Reversible Direction Diameter Knurl Knurl Pin Set Size Range*** Wheel SCKN-38-DW-D D * KPS SCKN-50-DW-D /4 & up*** D * KPS SCKN-162-DW-D D * KPS SCKN-75-DW-M M ** KPS SCKN-100-DW-M /16 & up*** M ** KPS SCKN-125-DW-M M ** KPS HDSCK-75-DW-O O ** KPS C /4 & up*** HDSCK-100-DW-O O ** KPS C HDSCK-100-DW-P P ** KPS C & up *** HDSCK-125-DW-P P ** KPS C Supplied with one (1) set of beveled diagonal high speed knurl wheels, *30 TPI, **25 TPI *** Warning: May cause deflections on small part diameters, and too much pressure on large diameters Self Centering Shoulder Forming SSCK - Shoulder Self-Centering Knurling Tool Reversible Direction Diameter Knurl Knurl Pin Set Size Range*** Wheel SSCK-38-DW SW2 * SW2.0P-2S SSCK-50-DW /4 & up*** SW2 * SW2.0P-2S SSCK-162-DW SW2 * SW2.0P-2S SSCK-75-DW SW4 ** SW4.0P-2S SSCK-100-DW /16 & up*** SW4 ** SW4.0P-2S SSCK-125-DW SW4 ** SW4.0P-2S Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels, *30 TPI, **25 TPI *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters Self Centering Forming 3SHKT - Three Swivel Head Knurling Tool Reversible Direction Diameter Knurl Knurl Pin Set Range*** Wheel Size 3SHKT-50-D D * KPS /4 & up*** 3SHKT-162-D D * KPS SHKT-75-M M ** KPS SHKT-100-M /16 & up *** M ** KPS SHKT-125-M M ** KPS * Supplied with three (3) sets of beveled diagonal right and diagonal left high speed TiN coated knurl wheels, 20 TPI, 30 TPI, 40 TPI ** Supplied with three (3) sets of beveled diagonal right and diagonal left high speed TiN coated knurl wheels, 16 TPI, 25 TPI, 35 TPI. *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters Forming FKT - Fixed Forming Knurling Tool Diameter Knurl Knurl Pin Set Range*** Wheel Size FKT-38-D D * KPS FKT-50-D /4 & up*** D * KPS FKT-162-D D * KPS FKT-75-M M ** KPS FKT-100-M /16 & up*** M ** KPS FKT-125-O O ** KPS Supplied with one (1) set of diagonal high speed beveled TiN coated knurl wheels, *30 TPI, ** 25 TPI *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters Forming SFKT - Shoulder Fixed Forming Knurling Tool Diameter Knurl Knurl Pin Set Range*** Wheel Size SFKT SW2 * SW2.0P-2S SFKT /4 & up*** SW2 * SW2.0P-2S SFKT SW2 * SW2.0P-2S SFKT SW4 ** SW4.0P-2S SFKT /16 & up*** SW4 ** SW4.0P-2S SFKT SW4 ** SW4.0P-2S Suppled with one (1) set of beveled diagonal high speed TiN coated knurl wheels, * 30 TPI (0.8mm), ** 25 TPI (1.0mm) *** Warning: May cause deflections on small part diameters, and too much pressure on large diameters Forming SWFKT - Single Wheel Fixed Forming Knurling Tool HDSWFKT - Heavy Duty Single Wheel Fixed Forming Knurling Tool Diameter Knurl Knurl Pin Set Range*** Wheel Size SWFKT-831-B B * KPS SWFKT-38-D D * KPS SWFKT-50-D D * KPS SWFKT-162-D D * KPS SWFKT-75-M M ** KPS Unlimited*** SWFKT-100-O O ** KPS SWFKT-125-O O ** KPS HDSWFKT-75-O O ** KPS C HDSWFKT-100-P P ** KPS C HDSWFKT-125-P P ** KPS C Supplied with one (1) straight high speed beveled TiN coated knurl wheel, *30 TPI, **25 TPI *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters Call: Visit: sales@doriantool.com 97

98 Forming SSWFKT - Single Shoulder Wheel Fixed Forming Knurling Tool Diameter Knurl Knurl Pin Set Size Range*** Wheel SSWFKT SW2 * SW2.0P-1S SSWFKT SW2 * SW2.0P-1S SSWFKT SW2 * SW2.0P-1S Unlimited*** SSWFKT SW4 ** SW4.0P-1S SSWFKT SW4 ** SW4.0P-1S SSWFKT SW4 ** SW4.0P-1S Suppled with one (1) beveled straight high speed TiN coated knurl wheel, * 30 TPI (0.8mm), ** 25 TPI (1.00mm) *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters Cutting 107ST - Straight Cutting Knurling Tool With A Square For CNC Diameter Knurl Knurl Pin Set R.H. LH. Range*** Wheel Size 107ST-50-R-RH/LH RDL* KPS C ST-162-R-RH/LH RDL* KPS C ST-75-M-RH/LH Unlimited*** MDL** KPS C ST-100-M-RH/LH MDL** KPS C ST-125-M-RH/LH MDL** KPS C Supplied with one (1) full faced diagonal left high speed TiN coated knurl wheel, * 30 TPI, ** 25 TPI *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters Cutting 107ST - Straight Cutting Shoulder Knurling Tool With A Square For CNC Diameter Knurl Knurl Pin Set R.H. LH. Range*** Wheel Size 107ST-50-2-RH/LH SW2L* SW2.0P-1S ST RH/LH SW2L* SW2.0P-1S ST-75-4-RH/LH Unlimited*** SW4L** SW4.0P-1S ST RH/LH SW4L** SW4.0P-1S ST RH/LH SW4L** SW4.0P-1S Supplied with one (1) full faced diagonal left high speed TiN coated knurl wheel, * 30 TPI (.8mm), ** 25 TPI (1.0mm) *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters Forming FACEKT - Face Forming Knurling Tool Diameter Knurl Knurl Pin Set Size Range*** Wheel FACEKT SW2 * SW2.0P-1S FACEKT SW2 * SW2.0P-1S Unlimited*** FACEKT SW4 ** SW4.0P-1S FACEKT SW4 ** SW4.0P-1S Supplied with one (1) beveled straight high speed TiN coated knurl wheel, * 30 TPI (.8mm), ** 25 TPI (1.0mm) *** Limited band width from knurl wheel Forming TIKT - True Internal Forming Knurling Tool Min. Diameter Knurl Knurl Pin Set Wheel Size TIKT-50-B B * KPS TIKT-75-D D * KPS TIKT-100-R R ** KPS TIKT-125-M M ** KPS Supplied with one (1) set of beveled diagonal high speed knurl wheels, *30 TPI, **25 TPI *** Warning: May cause deflections on small part diameters, and too much pressure on large diameters Forming SIKT - Shoulder Internal Forming Knurling Tool Min. Diameter Knurl Knurl Pin Set Wheel Size SIKT SW2 * SW2.0P-1S SIKT SW4 ** SW4.0P-1S SIKT SW4 ** SW4.0P-1S SIKT SW4 ** SW4.0P-1S Supplied with one (1) beveled straight high speed TiN coated knurl wheel, * 30 TPI, ** 25 TPI. Forming MMKT - Milling Machine Forming Knurling Tool Knurl Knurl Pin Set Wheel Size MMKT-38-D D * KPS MMKT-50-R R ** KPS MMKT-75-O O ** KPS MMKT-100-O O ** KPS MMKT-125-P P ** KPS Supplied with one (1) beveled straight high speed TiN coated knurl wheel, *30 TPI (0.8mm), **25 TPI (1.0mm) 98 Call: Visit: sales@doriantool.com

99 3 WHEEL KNURLING TOOL FOR CUTTING & FORMING Infinite Lengths with Diameters Small as.085 to Heavy Duty Shoulderless Carbide Pin High Speed Pin PROPERTIES 1. For small diameters When side pressure does not allow the use of a one or two wheel knurling tool. 2. For long lengths When support or live center is not permissible. The part would deflect if a standard one or two wheel knurling tool is used. 3. For high precision knurling When the finished diameter of the knurled part demands close tolerance. The three wheel knurling system applies less pressure per wheel controlling the displacement and the form of the material. This makes the knurl uniform and precise. 4. For high production High production without sacrificing performance and quality. 5. For automation When cost is a factor. The high performance of this tool will keep the manufacturing cost lower. 6. Which machine to use on Automatic Screw Machines, CNC Lathes, and Turret Lathes. Three wheel knurling tool Features: Minimum diameter.085" Maximum diameter 1.500" For straight or diamond knurl Infinite lengths Precise scroll gear Fine diameter adjustment Dial allows for visual diameter adjustment Knurl to a shoulder Self-adjust to parts and tool misalignment Easy to setup Simple to operate Manual knurl diameter release for manual lathes 3WSKT -Three wheel knurling tool with optional round or square shanks Resulting Knurl Pattern Recommended Use: Made of heat treated precision ground alloy steel. The dovetail guide and adjustable arms ensure the most possible accuracy and rigidity. A precise scroll gear allows for fine diameter settings. Scaled dial makes setting the diameter easy. This tool is engineered for most demanding knurling jobs in Screw Machine, C.N.C. Lathe, and Turret Lathe Applications. Square shank can be reversed for right hand or left hand operation. Square shank with preset center height. Straight pattern with 3 straight wheels Male 60º diamond pattern with diagonal wheels (2 & 1 or 2 & 1 ) For best results, use beveled knurl wheels. End-feed the knurling tool into the blank until the desired length of the knurl is done. The Three Wheel Knurling Tool can knurl up to a shoulder, minimum diameter of 2,16mm up to 38,1mm diameter, and infinite lengths. The Heavy Duty Three Wheel Knurling Tool is recommended for shoulderless applications for improved wheel life. Call: Visit: sales@doriantool.com 99

100 3 Wheel Knurling Tool Head to the Shoulder Knurling diameter setting Round Mounting Open L Use to Adjust the knurl Diameter Close H Square Max. Capacity Specifications Optional Square Optional Round H Body L Width Knurl Wheel Style Knurl Pin Set*** Size Size Square Length Dia. Length 3WSKT " 3.00" 3WRKT " 3.00" 3WKT " to 0.250" " SW2 * SW2.0P-3S WSKT " 3.50" 3WRKT " 3.50" 3WSKT " 4.00" 3WRKT " 4.00" 3WSKT " 3.50" 3WRKT " 3.50" 3WKT " to 0.500" 2.250" 1.575" SW2 * SW2.0P-3S WSKT " 4.00" 3WRKT " 4.00" 3WSKT " 5.00" 3WRKT " 5.00" 3WSKT " 4.00" 3WRKT " 4.00" 3WKT to 1.000" 3.000" 1.575" SW2 * SW2.0P-3S WSKT " 5.00" 3WRKT " 5.00" 3WKT to 1.500" 4.250" 2.440" SW2 * SW2.0P-3S WSKT " 5.00" 3WRKT " 5.00" Open 3-Wheel Knurling Tool Heavy Duty Shoulder-less Close H L 3 Wheels Knurling Tool Head Specification Optional Square Optional Round Knurl Size Size Capacity H L Wheel Series Knurl Pin Set Square Length Square Length 3WKT-40-M to 1.500" 4.250" 2.645" M** SM4.0P-3S WSKT " 5.00" 3WRKT " 5.00" 100 Call: Visit: sales@doriantool.com

101 Knurling Wheel Tooth Pattern & Workpiece Knurl Pattern Straight Tooth 30º Diagonal Helix Angle 60º Diamond Angle R.H. L.H. Male Female End-feed End-feed End-feed End-feed End-feed In-feed In-feed In-feed In-feed In-feed Edge Prep Full Faced Beveled Edge Full Faced: Sharp leading edge for Cutting Type knurling tools only. Beveled Edge: Edge security for forming type knurling tools only. Knurl Wheel Material High Speed Steel Knurl Wheels: Tough and shock resistant. Best recommended for materials such as Carbon Steel, Alloy Steel, and Stainless Steel. Cobalt Knurl Wheels: The 8.5% cobalt content adds hardness and wear resistance to the wheels. Best recommended for abrasive and soft materials such as Free Machining Steel, Aluminum, and nonferrous materials Circular Pitch (inch & mm) 1" 90º Knurl Wheel Series Pattern Grade Edge Prep 10 (TPI) 12 (TPI) 14 (TPI) 16 (TPI) 20 (TPI) 25 (TPI) 30 (TPI) 35 (TPI) 40 (TPI) 50 (TPI) 80 (TPI) AS-TPI-HS High Speed Sharp Corner A AS-TPI-HSB TiN Coated Beveled Corner Straight AS-TPI-C Cobalt Sharp Corner AS-TPI-CB TiN Coated Beveled Corner ADR-TPI-HS High Speed Sharp Corner /4" ADR-TPI-HSB Diagonal TiN Coated Beveled Corner /4" ADR-TPI-C Cobalt Sharp Corner ADR-TPI-CB TiN Coated Beveled Corner /8" ADL-TPI-HS High Speed Sharp Corner ADL-TPI-HSB Diagonal TiN Coated Beveled Corner ADL-TPI-C Cobalt Sharp Corner ADL-TPI-CB TiN Coated Beveled Corner AM-TPI-HS Male High Speed Sharp Corner AM-TPI-HSB Diamond TiN Coated Beveled Corner AF-TPI-HS Female High Speed Sharp Corner AF-TPI-HSB Diamond TiN Coated Beveled Corner BS-TPI-HS High Speed Sharp Corner B BS-TPI-HSB TiN Coated Beveled Corner Straight BS-TPI-C Cobalt Sharp Corner BS-TPI-CB TiN Coated Beveled Corner BDR-TPI-HS High Speed Sharp Corner /8" BDR-TPI-HSB Diagonal TiN Coated Beveled Corner /16" BDR-TPI-C Cobalt Sharp Corner BDR-TPI-CB TiN Coated Beveled Corner /32" BDL-TPI-HS High Speed Sharp Corner BDL-TPI-HSB Diagonal TiN Coated Beveled Corner BDL-TPI-C Cobalt Sharp Corner BDL-TPI-CB TiN Coated Beveled Corner CS-TPI-HS High Speed Sharp Corner C CS-TPI-HSB TiN Coated Beveled Corner Straight CS-TPI-C Cobalt Sharp Corner CS-TPI-CB TiN Coated Beveled Corner CDR-TPI-HS High Speed Sharp Corner /16" CDR-TPI-HSB Diagonal TiN Coated Beveled Corner /2" CDR-TPI-C Cobalt Sharp Corner CDR-TPI-CB TiN Coated Beveled Corner /16" CDL-TPI-HS High Speed Sharp Corner CDL-TPI-HSB Diagonal TiN Coated Beveled Corner CDL-TPI-C Cobalt Sharp Corner CDL-TPI-CB TiN Coated Beveled Corner CM-TPI-HS Male High Speed Sharp Corner CM-TPI-HSB Diamond TiN Coated Beveled Corner CF-TPI-HS Female High Speed Sharp Corner CF-TPI-HSB Diamond TiN Coated Beveled Corner NOTE: For forming-type knurling tools, beveled wheels are recommended for longer tool life. For cutting-type tools, full-face (sharp corner) wheels are the only choice. All Dorian Tool knurl wheels are PVD TiN coated to provide less friction and longer tool life. For a complete selection of knurling wheels, please refer to our general catalog. Call: Visit: sales@doriantool.com 101 Pitch

102 Knurl Wheel Series Pattern Grade Edge Prep 10 (TPI) 12 (TPI) 14 (TPI) 16 (TPI) 20 (TPI) 25 (TPI) 30 (TPI) 35 (TPI) 40 (TPI) 50 (TPI) 80 (TPI) DS-TPI-HS High Speed Sharp Corner D DS-TPI-HSB TiN Coated Beveled Corner Straight DS-TPI-C Cobalt Sharp Corner DS-TPI-CB TiN Coated Beveled Corner DDR-TPI-HS High Speed Sharp Corner /16" DDR-TPI-HSB Diagonal TiN Coated Beveled Corner /2" DDR-TPI-C Cobalt Sharp Corner DDR-TPI-CB TiN Coated Beveled Corner DDL-TPI-HS High Speed Sharp Corner " DDL-TPI-HSB Diagonal TiN Coated Beveled Corner DDL-TPI-C Cobalt Sharp Corner DDL-TPI-CB TiN Coated Beveled Corner DF-TPI-HS Female High Speed Sharp Corner DF-TPI-HS Diamond TiN Coated Beveled Corner DF-TPI-C Female Cobalt Sharp Corner DF-TPI-CB Diamond TiN Coated Beveled Corner MS-TPI-HS High Speed Sharp Corner M MS-TPI-HSB TiN Coated Beveled Corner Straight MS-TPI-C Cobalt Sharp Corner MS-TPI-CB TiN Coated Beveled Corner MDR-TPI-HS High Speed Sharp Corner /16" MDR-TPI-HSB Diagonal TiN Coated Beveled Corner " MDR-TPI-C Cobalt Sharp Corner MDR-TPI-CB TiN Coated Beveled Corner MDL-TPI-HS High Speed Sharp Corner " MDL-TPI-HSB Diagonal TiN Coated Beveled Corner MDL-TPI-C Cobalt Sharp Corner MDL-TPI-CB TiN Coated Beveled Corner MF-TPI-HS Female High Speed Sharp Corner MF-TPI-HSB Diamond TiN Coated Beveled Corner MF-TPI-C Female Cobalt Sharp Corner MF-TPI-CB Diamond TiN Coated Beveled Corner OS-TPI-HS High Speed Sharp Corner O OS-TPI-HSB TiN Coated Beveled Corner Straight OS-TPI-C Cobalt Sharp Corner OS-TPI-CB TiN Coated Beveled Corner ODR-TPI-HS High Speed Sharp Corner /16" ODR-TPI-HSB Diagonal TiN Coated Beveled Corner " ODR-TPI-C Cobalt Sharp Corner ODR-TPI-CB TiN Coated Beveled Corner ODL-TPI-HS High Speed Sharp Corner /8" ODL-TPI-HSB Diagonal TiN Coated Beveled Corner ODL-TPI-C Cobalt Sharp Corner ODL-TPI-CB TiN Coated Beveled Corner OM-TPI-HS Male High Speed Sharp Corner OM-TPI-HSB Diamond TiN Coated Beveled Corner OF-TPI-HS Female High Speed Sharp Corner OF-TPI-HSB Diamond TiN Coated Beveled Corner PS-TPI-HS High Speed Sharp Corner P PS-TPI-HSB TiN Coated Beveled Corner Straight PS-TPI-C Cobalt Sharp Corner PS-TPI-CB TiN Coated Beveled Corner PDR-TPI-HS High Speed Sharp Corner /2" PDR-TPI-HSB Diagonal TiN Coated Beveled Corner /4" PDR-TPI-C Cobalt Sharp Corner PDR-TPI-CB TiN Coated Beveled Corner PDL-TPI-HS High Speed Sharp Corner /2" PDL-TPI-HSB Diagonal TiN Coated Beveled Corner PDL-TPI-C Cobalt Sharp Corner PDL-TPI-CB TiN Coated Beveled Corner PM-TPI-HS Male High Speed Sharp Corner PM-TPI-HSB Diamond TiN Coated Beveled Corner PF-TPI-C Female High Speed Sharp Corner PF-TPI-CB Diamond TiN Coated Beveled Corner NOTE: For forming-type knurling tools, beveled wheels are recommended for longer tool life. For cutting-type tools, full-face (sharp corner) wheels are the only choice. All Dorian Tool knurl wheels are PVD TiN coated to provide less friction and longer tool life. For a complete selection of knurling wheels, please refer to our general catalog. Pitch 102 Call: Visit: sales@doriantool.com

103 Knurl Wheel Series Pattern Grade Edge Prep 10 (TPI) 12 (TPI) 14 (TPI) 16 (TPI) 20 (TPI) 25 (TPI) 30 (TPI) 35 (TPI) 40 (TPI) 50 (TPI) 80 (TPI) RS-TPI-HS High Speed Sharp Corner R RS-TPI-HSB TiN Coated Beveled Corner Straight RS-TPI-C Cobalt Sharp Corner RS-TPI-CB TiN Coated Beveled Corner /4" 3/4" RDR-TPI-HS High Speed Sharp Corner RDR-TPI-HSB Diagonal TiN Coated Beveled Corner RDR-TPI-C Cobalt Sharp Corner RDR-TPI-CB TiN Coated Beveled Corner " RDL-TPI-HS High Speed Sharp Corner RDL-TPI-HSB Diagonal TiN Coated Beveled Corner RDL-TPI-C Cobalt Sharp Corner RDL-TPI-CB TiN Coated Beveled Corner RF-TPI-HS Female High Speed Sharp Corner RF-TPI-HSB Diamond TiN Coated Beveled Corner RF-TPI-C Female Cobalt Sharp Corner RF-TPI-CB Diamond TiN Coated Beveled Corner SS-TPI-HS High Speed Sharp Corner S SS-TPI-HSB TiN Coated Beveled Corner Straight SS-TPI-C Cobalt Sharp Corner SS-TPI-CB TiN Coated Beveled Corner SDR-TPI-HS High Speed Sharp Corner /4" 3/4" 1/4" SDL-TPI-HS High Speed Sharp Corner SDL-TPI-HSB Diagonal TiN Coated Beveled Corner SDR-TPI-HSB Diagonal TiN Coated Beveled Corner SDR-TPI-C Cobalt Sharp Corner SDR-TPI-CB TiN Coated Beveled Corner SDL-TPI-C Cobalt Sharp Corner SDL-TPI-CB TiN Coated Beveled Corner SM-TPI-HS Male High Speed Sharp Corner SM-TPI-HSB Diamond TiN Coated Beveled Corner SF-TPI-HS Female High Speed Sharp Corner SF-TPI-HSB Diamond TiN Coated Beveled Corner SW2S-TPI-HS High Speed Sharp Corner SW2 SW2S-TPI-HSB TiN Coated Beveled Corner Straight SW2S-TPI-C Cobalt Sharp Corner SW2S-TPI-CB TiN Coated Beveled Corner SW2R-TPI-HS High Speed Sharp Corner SW2R-TPI-HSB Diagonal TiN Coated Beveled Corner /4" 1/2" SW2R-TPI-C Cobalt Sharp Corner SW2R-TPI-CB TiN Coated Beveled Corner /32" SW2L-TPI-HS High Speed Sharp Corner /4" SW2L-TPI-HSB Diagonal TiN Coated Beveled Corner SW2L-TPI-C Cobalt Sharp Corner SW2L-TPI-CB TiN Coated Beveled Corner SW2F-TPI-HS Female High Speed Sharp Corner SW2F-TPI-HSB Diamond TiN Coated Beveled Corner SW2F-TPI-C Female Cobalt Sharp Corner SW2F-TPI-CB Diamond TiN Coated Beveled Corner SW4 SW4S-TPI-HS High Speed Sharp Corner SW4S-TPI-HSB TiN Coated Beveled Corner Straight SW4S-TPI-C Cobalt Sharp Corner SW4S-TPI-CB TiN Coated Beveled Corner /2 1 SW4R-TPI-HS High Speed Sharp Corner SW4R-TPI-HSB Diagonal TiN Coated Beveled Corner SW4R-TPI-C Cobalt Sharp Corner /4 SW4R-TPI-CB TiN Coated Beveled Corner /8 SW4L-TPI-HS High Speed Sharp Corner SW4L-TPI-HSB Diagonal TiN Coated Beveled Corner SW4L-TPI-C Cobalt Sharp Corner SW4L-TPI-CB TiN Coated Beveled Corner SW4F-TPI-HS Female High Speed Sharp Corner SW4F-TPI-HSB Diamond TiN Coated Beveled Corner SW4F-TPI-C Female Cobalt Sharp Corner SW4F-TPI-CB Diamond TiN Coated Beveled Corner NOTE: For forming-type knurling tools, beveled wheels are recommended for longer tool life. For cutting-type tools, full-face (sharp corner) wheels are the only choice. All Dorian Tool knurl wheels are PVD TiN coated to provide less friction and longer tool life. For a complete selection of knurling wheels, please refer to our general catalog. Pitch Call: Visit: sales@doriantool.com 103

104 MILLING CUTTERS & INSERTS FACE MILLING CORNER ROUNDING CHAMFERFING DOVETAIL T-SLOT WOODRUFF KEY SEAT SLOT MILLING SHOULDER MILLING 104 Call: Visit:

105 Convex Radius Cutter - Cutting Rake - 15 for 15 positive square SDGX inserts d C R H R D1 D 90 R-Range C D D1 d Min. Max. H Insert Qty. SDGX Gage Insert Torx Key QV-062-S C_ T-15 QV-100-S QV-100-S QV-200-S C_ T-20 QV-100-S QV-100-S º Dovetail Cutter - Cutting Rake - 15 for 15 positive TDEX inserts. d 15 C F H D 75 C D d F H Insert Qty. TDEX Gage Insert Insert Torx Screw Torx Key D15X-050-TD TS M1 T-7 D15X-100-TD D15X-187-TD TS M1 T-15 D15X-250-TD TS M1 T-20 Call: Visit: sales@doriantool.com 105

106 45º Dovetail Cutter- Cutting Rake - 11 for 11 positive TDEX inserts. d C H F D 45 C D d F H Insert Qty. TDEX Gage Insert Insert Torx Screw Torx Key D45X-050-TD D45X-075-TD TS M1 T-7 D45X-100-TD D45X-137-TD D45X-187-TD D45X-225-TD D45X-250-TD T304 TS-4.7-8M1 T TS M1 T Dovetail Cutter - Cutting Rake - 15 for 15 positive triangle TDEX inserts. d C 30 H F D 60 C D d F H Insert Qty. TDEX Gage Insert Insert Torx Screw Torx Key D60X-050-TD D60X-075-TD TS M1 T-7 D60X-100-TD D60X-137-TD TS-4.7-8M1 T D60X-187-TD TS M1 T-15 D60X-225-TD D60X-250-TD TS M1 T Call: Visit: sales@doriantool.com

107 Double 30 Chamfer Mill - Cutting Rake - 15 for 15 positive triangle TDEX inserts d C 30 F H D C D d F H Insert Qty. TDEX Gage Insert Insert Torx Screw Torx Key C TD TS M1 T-7 C TD C TD TS-4.7-8M1 T-15 C TD TS M1 T-20 Double 45 Chamfer Mill - Cutting Rake - 15 for 15 positive square SDHW & SPMT inserts C D D1 d F H Insert Qty. C SD SDHW Gage Insert Insert Torx Screw Torx Key C SD C SD TS-4.7-8M1 T-15 C45XL-112-SD C45XL-150-SD C D D1 d F H Insert Qty. C SP C SP SPMT Gage Insert Insert Torx Screw Torx Key TS M1 T-7 Call: Visit: sales@doriantool.com 107

108 WOODRUFF KEY SEAT CUTTER Cutting Rake - 20 for positive TEHW inserts d C F D C D d F Insert Qty. TEHW Gage Insert Insert Torx Screw Torx Key DWKC-806-TEO DWKC-607-TEO DWKC-707-TEO DWKC-807-TEO DWKC-608-TEO DWKC-708-TEO DWKC-808-TEO DWKC-1008-TEO DWKC-609-TEO DWKC-709-TEO TS-06 T-6 DWKC-809-TEO DWKC-1009-TEO DWKC-710-TEO DWKC-1210-TEO DWKC-811-TEO DWKC-1011-TEO DWKC-1211-TEO DWKC-1012-TEO DWKC-1212-TEO T-SLOT CUTTER Cutting Rake - 20 for SPMT and SDHW positive inserts d C N D F H C D d F H N No. Inserts SLOT-078-SP No. Flutes Gage Insert Insert Torx Screw Torx Key SLOT-097-SP SPMT TS M2 T-8 SLOT-125-SP SLOT-147-SD SLOT-184-SD SDHW TS M1 T-15 SLOT-222-SD Call: Visit: sales@doriantool.com

109 30, 45 and 60 Chamfer Mill - Cutting Rake - 11 for 11 positive triangle TPHT inserts C D D1 d F H Insert Qty. 30 C TP TPHT Gage Insert Insert Torx Screw Torx Key 45 C TP C TP TS-4.7-8M1 T-15 2" 90 End Mill - Cutting Rake - 20 for 7 positive triangle TC_T inserts C D d F H Insert Qty. E TC TC_T Gage Insert Insert Torx Screw Torx Key E TC TS-4.7-8M1 T-15 E TC3-R R Call: Visit: sales@doriantool.com 109

110 High Positive 90 Milling Cutter- Cutting Rake - 20 for 11 positive 85 parallelogram AP_ inserts End Mill C D d F H Insert Qty. E AP APKT Gage Insert Insert Torx Screw Torx Key E AP E AP E AP E AP E AP E AP TS M1 T-7 E AP E AP E AP E AP E AP10-R R High Positive 90 Milling Cutter- Cutting Rake - 20 for 11 positive 85 parallelogram AP_ inserts Face Mill C D d F H H1 Insert Qty. E90A-200-AP E90A-250-AP APKT Gage Insert Insert Torx Screw Torx Key 1003 TS M1 T Call: Visit: sales@doriantool.com

111 High Positive 90 Milling Cutter- Cutting Rake - 20 for 11 positive 85 parallemogram AP_ inserts End Mill C D d F H Insert Qty. E AP APKT Gage Insert Insert Torx Screw Torx Key E AP E AP E AP TS-4.7-8M1 T-15 E AP High Positive 90 Milling Cutter- Cutting Rake - 20 for 11 positive 85 parallemogram AP_ inserts Face Mill C D d F H H1 Insert Qty. E90A-200-AP APKT Gage Insert Insert Torx Screw Torx Key E90A-250-AP E90A-300-AP E90A-400-AP TS M1 T-15 E90A-500-AP Call: Visit: sales@doriantool.com 111

112 Extended 90 Milling Cutter - Cutting Rake - 20 for 11 positive 85 parallelogram AP_ inserts End Mill C D Size F H Insert Qty. Flutes Qty. EX AP EX AP EX AP APKT Gage Insert Insert Torx Screw Torx Key 1003 TS M1 T-7 Extended 90 Milling Cutter - Cutting Rake - 20 for 11 positive 85 parallelogram AP_ inserts Face Mill C D d F H H1 Insert Qty. Flutes Qty. EX90A-200-AP EX90A-250-AP EX90A-300-AP APKT Gage Insert Insert Torx Screw Torx Key 1604 TS-4.7-8M1 T-15 EX90A-500-AP Call: Visit: sales@doriantool.com

113 90 Aluminum Milling Cutter - Cutting Rake - 7 for 7 positive 35 diamond VCGT inserts d C H F D 90 End Mill C D d F H Insert Qty. VCGT Gage Insert Insert Torx Screw Torx Key E VC TS M1 T-20 E VC Aluminum Milling Cutter - Cutting Rake - 7 for 7 positive 35 diamond VCGT inserts d H1 H C F D Face Mill C D d F H H1 Insert Qty. VCGT Gage Insert Insert Torx Screw Torx Key E90A-200-VC TS-4.7-8M1 T-15 E90A-250-VC E90A-300-VC E90A-400-VC TS M1 T-20 E90A-500-VC E90A-600VC Concave 90 Milling Cutter - Cutting Rake - 20 for 11 positive 85 parallelogram APKT inserts For APKT-1604 inserts with corner radius up to.125" C D d F H Insert Qty. APKT Gage Insert Insert Torx Screw Torx Key E AP16R E AP16R E AP16R TS-4.7-8M1 T-15 E AP16R Call: Visit: sales@doriantool.com 113

114 Recycle CNMG Turning Edges + 4 Milling Edges After the cutting edges are used on your turning tool holder, do not throw the insert away, it can be used in this milling cutter to utilize four more cutting edges that were not used in your lathe work. From USED TURNING to NEW MILLING Used Turning New Milling 15 CNMG Recycle Milling Cutter - Cutting Rake - Negative 7 for Negative 80 diamond CNMG inserts d C H 15 D D1 F End Mill C D D1 d F H Insert Qty. CNMG Gage Insert Insert Torx Screw Torx Key REC CN REC CN TS M1 T-20 REC CN4-R R d H1 H C D D1 15 F Face Mill C D D1 d F H H1 Insert Qty. CNMG Gage Insert Insert Torx Screw Torx Key REC15A-300-CN TS M1 T-20 REC15A-400-CN Call: Visit: sales@doriantool.com

115 Insert Radius DK25M DASK25B DASP35B TDEX 60º TDEX EN TDEX EN Insert DNU25GT DNP25GT DPP30GT TPHT UEN TPHT-UEN TPHT UEN TDEX EN TDEX EN TDEX EN TDEX EN TDEX EN TDEX EN TDEX 45º TDEX EN SPMT Insert DUP30M SPMT EN TEHW TDEX EN TDEX-17T304-EN TDEX-17T308-EN TDEX EN TDEX EN TEHW-0602-AEEN DK25M / DNU25GT Uncoated, hard and wear resistant C2 Substrate for Aluminum & Non Ferrous materials. DASK25B C2 Substrate with PVD TiN-TiAlN-TiN multi-layer coating. For general purpose milling of non-ferrous metals such as aluminum, copper, brass, and bronze, high temp alloys, 300-series stainless steels and cast iron with medium to high SFM.t SDHW SDHW EN DASP35B C5 Substrate with PVD TiN-TiAlN-TiN multi-layer coating. For general purpose milling of carbon steels, alloy steels and tool steels in annealed state with medium to high SFM. Insert Radius DNU25GT DUP25GT SDGX-UEN SDGX-09C01-E /8" Square SDGX-09C03-E Convex Radius SDGX-09C04-E SDGX-UEN 3/4 Square Convex Radius SDGX-19C05-E SDGX-19C06-E SDGX-19C07-E SDGX-19C08-E SDGX-19C09-E SDGX-19C10-E SDGX-19C11-E SDGX-19C12-E SDGX-19C13-E SDGX-19C14-E SDGX-19C15-E* SDGX-19C16-E* *All SDGX inserts have 4 cutting edges, except 5,943mm & 6,35mm radius inserts that have 2 cutting edges. VCGT-NFU 35º Triangle Universal TCMT-MEM 60º Triangle Universal Grade Grade ISO DNU10GT DNX10UT VCGT-448-NFU Grade ISO DMC30UT TCMT MEM TCMT MEM DUP25GT C2 Substrate with PVD TiN-TiAlN coating. For general purpose milling of carbon steels, alloy steels, stainless steels, high temp alloys, hardened metals and non ferrous materials with medium to high SFM. DNP25GT C2 Substrate with PVD TiN coating. For general purpose milling of high temp alloys, hardened metals and non ferrous materials with medium SFM. DPP30GT C5 Substrate with PVD TiN coating. For general purpose milling of carbon steels, alloy steels and stainless steels at medium SFM. DUP30M C5 Substrate with PVD TiN-TiAlN multi-layer coating. For general purpose milling of carbon steels, alloy steels and tool steels in annealed state with medium to high SFM. Also use on stainless steels. DNU10GT For general milling applications at a high SFM (V c ). Hard, abrasive and wear resistant micro-grained uncoated substrate, for a hard and sharp cutting edge (not for interrupted cuts). Best for Aluminum, Plastics and all Non Ferrous metals and materials. DNX10UT For universal milling at a very high SFM (V c ). Hard, abrasive and high resistant substrate with a microplus plasma TiAlN coating to improve cutting edge hardness, wear and heat resistant, and better chip flow. Best for Aluminum, Plastics and low Silicone Aerospace Aluminum. DMC30UT M30 Substrate with CVD TiN/TiCN/TiN Coating. Universal grade for Steels and Stainless Steels. Call: Visit: sales@doriantool.com 115

116 Insert Grade Grade Grade Grade Grade Grade Grade DPP15HM DPC25UM DPP35RM DMC35UM DKC10UM DK10M DKP10VM UPC# UPC# DPP15HM: Multi-purpose grade for milling carbon and alloy steels, stainless steels and cast iron with nodular graphite. This TiAlN P25 grade is especially suitable for high cutting speeds in dry machining. APKT-1003-PDSR- (.019 radius) DPC25UM: First choice for carbon and alloy steels. Tough P30 substrate with MT- CVD multi-layer Al2O3 coating. APHT-1003-PDFR- (.019 radius) DPP35RM: First choice for Tool Steels. Very tough P35 substrate with Nanotop PVD AlTiN coating. Ideal for dry milling at low to medium cutting speeds for roughing. APKT-1604-PDSR- (.032 radius) DMC35UM: First choice for Austenitic Stainless Steels at low to medium cutting speeds and wet machining. Extremely tough M40, fine grained carbide substrate with thin and tough PVD multi-layer coating. APHT-1604-PDFR- (.032 radius) APKT SR- (.063 radius) APKT SR- (.094 radius) APKT SR- (.125 radius) DKC10UM: First choice for grey cast iron (GG), nodular cast iron (GGG), malleable cast iron and alloyed cast iron. K15 substrate with extremely hard and wear resistant MT-CVD multi-layer coating. DKP10VM: First choice for aluminum and other non-ferrous metals. Upsharp cutting edge. Very hard and wear resistant K10 substrate with extremely thin PVD TiAlN coating. Also, first choice for finishing stainless steels and cast irons. DK10M: Uncoated grade for Aluminum and Non Ferrous materials. Spare Parts Milling Insert Torx Screw PKG. TS TS M TS-4.7-6M TS-4.7-8M TS M TS M TS M Call: Visit: sales@doriantool.com

117 HIGH PERFORMANCE LIVE CENTERS PERFORMANCE, TECHNOLOGY & QUALITY Flange Shield to maximize the protection against dirt & coolant. Double High-Precision Needle Bearings support the extended spindle body. This reduces deflection, increases rigidity and neutralize vibration. Full Axial Thrust Bearing will support heavy thrust loads Precision Lip Seal Prevents penetration of dirt and coolant. Precision HEAVY DUTY Taper Roller Bearings will outlast any traditional ball bearing system. All Dorian Precision and Heavy Duty live centers feature Precision Heavy Duty Taper Roller Bearings. Call: Visit:

118 Precision General Purpose Precision TAPER ROLLER Bearings Live Center with 60º Standard Steel Point A B L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-PRE-S60-MT MT PLC-PRE-S60-MT MT PLC-PRE-S60-MT MT PLC-PRE-S60-MT MT PLC-PRE-S60-MT MT PLC-PRE-S60-MT MT Live Center with 60º Extended Medium Slim Steel Point A B C L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) Precision General Purpose Precision TAPER ROLLER Bearings PLC-PRE-EMSSP-MT MT PLC-PRE-EMSSP-MT MT PLC-PRE-EMSSP-MT MT Live Center with 60º Extended Large Steel Point A B C L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) Precision General Purpose Precision TAPER ROLLER Bearings PLC-PRE-ELSP-MT MT PLC-PRE-ELSP-MT MT PLC-PRE-ELSP-MT MT PLC-PRE-ELSP-MT MT Heavy Duty Precision HEAVY DUTY TAPER ROLLER Bearings Live Center with 60º Standard Steel Point A B L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-HDA-S60-MT MT PLC-HDA-S60-MT MT PLC-HDA-S60-MT MT PLC-HDA-S60-MT MT PLC-HDA-S60-MT MT PLC-HDA-S60-MT6S MT6S PLC-HDA-S60-M M80* PLC-HDA-S60-M M100* Live Center with 60º Extended Medium Slim Steel Point A B C L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) Heavy Duty Precision HEAVY DUTY TAPER ROLLER Bearings PLC-HDA-EMSSP-MT MT PLC-HDA-EMSSP-MT MT PLC-HDA-EMSSP-MT MT Live Center with 60º Extended Large Steel Point A B C L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) Heavy Duty Precision HEAVY DUTY TAPER ROLLER Bearings PLC-HDA-ELSP-MT MT PLC-HDA-ELSP-MT MT PLC-HDA-ELSP-MT MT PLC-HDA-ELSP-MT MT Call: Visit: sales@doriantool.com

119 CNC High Speed Heavy Duty Live Center with 60º Standard Steel Point A B L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) CNC High Speed PLC-CNC-S60-MT MT PLC-CNC-S60-MT MT PLC-CNC-S60-MT MT PLC-CNC-S60-MT MT CNC High Speed Heavy Duty Live Center with 60º Standard Carbide Point A B C L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-C60-MT MT CNC High Speed PLC-CNC-C60-MT MT PLC-CNC-C60-MT MT PLC-CNC-C60-MT MT CNC High Speed Heavy Duty Live Center with 60º Extended Medium Slim Steel Point A B C L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-EMSSP-MT MT CNC High Speed PLC-CNC-EMSSP-MT MT PLC-CNC-EMSSP-MT MT PLC-CNC-EMSSP-MT MT CNC High Speed Heavy Duty Live Center with 60º Extended Medium Slim Carbide Point A B C L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-EMSCP-MT MT CNC High Speed PLC-CNC-EMSCP-MT MT PLC-CNC-EMSCP-MT MT PLC-CNC-EMSCP-MT MT CNC High Speed Heavy Duty Live Center with 60º Extended Small Slim Steel Point A B C L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-ESSSP-MT MT CNC High Speed PLC-CNC-ESSSP-MT MT PLC-CNC-ESSSP-MT MT PLC-CNC-ESSSP-MT MT Call: Visit: sales@doriantool.com 119

120 CNC High Speed Heavy Duty Live Center with 60º Extended Small Slim Carbide Point A B C L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-ESSCP-MT MT CNC High Speed PLC-CNC-ESSCP-MT MT PLC-CNC-ESSCP-MT MT PLC-CNC-ESSCP-MT MT CNC High Speed Heavy Duty Live Center with 60º Extended Large Slim Steel Point A B C L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-ELSSP-MT MT CNC High Speed PLC-CNC-ELSSP-MT MT PLC-CNC-ELSSP-MT MT PLC-CNC-ELSSP-MT MT CNC High Speed Heavy Duty Live Center with 60º Extended Large Slim Carbide Point A B C L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-ELSCP-MT MT CNC High Speed PLC-CNC-ELSCP-MT MT PLC-CNC-ELSCP-MT MT PLC-CNC-ELSCP-MT MT CNC High Speed Heavy Duty Live Center with 60º Extended Large Steel Point A B C L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-ELSP-MT MT CNC High Speed PLC-CNC-ELSP-MT MT PLC-CNC-ELSP-MT MT PLC-CNC-ELSP-MT MT CNC High Speed Heavy Duty Live Center with 60º Extended Large Carbide Point A B C L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-ELCP-MT MT CNC High Speed PLC-CNC-ELCP-MT MT PLC-CNC-ELCP-MT MT PLC-CNC-ELCP-MT MT Call: Visit: sales@doriantool.com

121 Heavy Duty Live Center for Interchangeable Points (Includes one 60º Intechangeable Steel Point) A B L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-HDA-INT-MT MT Heavy Duty Precision HEAVY DUTY TAPER ROLLER Bearings PLC-HDA-INT-MT MT PLC-HDA-INT-MT MT PLC-HDA-INT-MT MT PLC-HDA-INT-MT MT CNC High Speed Live Center for Interchangeable Points (Includes one 60º Intechangeable Steel Point) A B L1 L2 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-CNC-INT-MT MT CNC High Speed PLC-CNC-INT-MT MT PLC-CNC-INT-MT MT PLC-CNC-INT-MT MT INP Standard Interchangeable Steel Point USP Undersized Interchangeable Steel Point INCP Standard Interchangeable Steel Point with Carbide Body Size B L1 L PLCIP-INP-2-3 2& PLCIP-INP PLCIP-INP PLCIP-INP Body Size B C L1 L2 L PLCIP-USP-2-3 2& PLCIP-USP PLCIP-USP PLCIP-USP Body Size B D L1 L PLCIP-INCP & PLCIP-INCP PLCIP-INCP PLCIP-INCP EXP Extended Interchangeable Steel Point FCUP Female Cup Interchangeable Steel Point SBNP Bull Nose Interchangeable Steel Point Body Size B C L1 L PLCIP-EXP-2-3 2& PLCIP-EXP PLCIP-EXP PLCIP-EXP Body Size B C L1 L PLCIP-FCUP-2-3 2& PLCIP-FCUP PLCIP-FCUP PLCIP-FCUP Small Body Size B C L1 L PLCIP-SBNP-2-3 2& PLCIP-SBNP PLCIP-SBNP PLCIP-SBNP Call: Visit: sales@doriantool.com 121

122 MBNP Bull Nose Interchangeable Steel Point LBNP Bull Nose Interchangeable Steel Point MSP Mini Sized Steel Point Medium Large Body Size B C L1 L PLCIP-MBNP-2-3 2& PLCIP-MBNP PLCIP-MBNP PLCIP-MBNP Body Size B C L1 L PLCIP-LBNP-2-3 2& PLCIP-LBNP PLCIP-LBNP PLCIP-LBNP Body Size B C L1 L2 L PLCIP-MSP & PLCIP-MSP PLCIP-MSP PLCIP-MSP USCP Undersized Interchangeable Steel Point with Carbide Thread CH L Center Point Extraction Tool CNC Lock Nut Wrench Extractor Nut for Threaded Dead Centers Body Size B C D L1 L2 L PLCIP-USCP & PLCIP-USCP PLCIP-USCP PLCIP-USCP Center Point Extraction Tool Body Size PLCIP-CPEW-2-3 MT PLCIP-CPEW-4 MT PLCIP-CPEW-5 MT PLCIP-CPEW-6 MT6 CNC Lock Nut Body Wrench Size PLCIP-LNW-30SP MT PLCIP-LNW-40SP MT PLCIP-LNW-50SP MT5 Thread PLC-CNC-DCEN-36 M36 x PLC-CNC-DCEN-41 M48 x PLC-CNC-DCEN-48 M48 x PLC-CNC-DCEN-68 M68 x 1.5 Precision Spring Loaded Live Center for Interchangeable Points (Includes one 60º Intechangeable Steel Point) A B L1 L2 L3 D Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) Spring Loaded PLC-CNC-INT-DIA (30mm) PLC-CNC-INT-DIA (40mm) CNC High Speed Live Center with Extended Steel Point A B C L1 L2 L3 D Weight (lb) Max. RPM Max. workpiece Max. Thrust Weight (lb) load (lb) PLC-CNC-ELSP-DIA (30mm) PLC-CNC-ELSP-DIA (40mm) Call: Visit: sales@doriantool.com

123 CNC Super High Speed Heavy Duty Live Center with 60º Standard Steel Point A B D L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-SPA-S60-MT MT PLC-SPA-S60-MT MT PLC-SPA-S60-MT MT CNC Super High Speed Heavy Duty Live Center with 60º Standard Carbide Point A B C D L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-SPA-C60-MT MT PLC-SPA-C60-MT MT PLC-SPA-C60-MT MT CNC Super High Speed Heavy Duty Live Center with 60º Extended Large Steel Point A B C D L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-SPA-ELSP-MT MT PLC-SPA-ELSP-MT MT PLC-SPA-ELSP-MT MT CNC Super High Speed Heavy Duty Live Center with 60º Extended Large Steel Point A B C D L1 L2 L3 Morse Taper Weight (lb) Max. RPM Max. workpiece Weight (lb) Max. Thrust load (lb) PLC-SPA-ELCP-MT MT PLC-SPA-ELCP-MT MT PLC-SPA-ELCP-MT MT Call: Visit: sales@doriantool.com 123

124 Face Drivers The Mechanical and Compact Design of the Dorian Face Driver is Accurate Powerful Simple Reliable Engineered for Proven Performance! The Perfetta Face Driver is engineered to drive a workpiece without clamping the outside diameter, allowing a precision turning of the workpiece over the entire length in one set-up and one operation. The center point of the Face Driver holds the work piece with high rigidity, accuracy and concentricity. The Driver Pins, engage and drive the workpiece with a constant force safely and reliably. 12mm (.472 ) Minimum Diameter 22mm (.866 ) Minimum Diameter Capacity Min. Max. A B C L1 L PLC-FD-12-SS mm Straight PLC-FD-12-MT MT PLC-FD-12-MT MT4 Driving Pin Driving Pin Driving Pin Center Point PLC-FDP-12-N PLC-FDP-12-L PLC-FDP-12-R PLC-FDP-12-C Clockwise & Counter Clockwise Counter Clockwise Clockwise 60º Center Point Capacity Min. Max. A B C L1 L PLC-FD-22-SS mm Straight PLC-FD-22-MT MT PLC-FD-22-MT MT PLC-FD-22-MT MT5 Driving Pin Driving Pin Driving Pin Center Point PLC-FDP-22-N PLC-FDP-22-L PLC-FDP-22-R PLC-FDP-22-C Clockwise & Counter Clockwise Counter Clockwise Clockwise 60º Center Point 42mm (1.654 ) Minimum Diameter 65mm (2.559 ) Minimum Diameter Capacity Min. Max. A B C L1 L2 Morse Taper PLC-FD-42-MT MT PLC-FD-42-MT MT PLC-FD-42-MT MT6 Driving Pin Driving Pin Driving Pin Center Point PLC-FDP-42-N PLC-FDP-42-L PLC-FDP-42-R PLC-FDP-42-C Clockwise & Counter Clockwise Counter Clockwise Clockwise 60º Center Point Capacity Min. Max. A B C L1 L2 Morse Taper PLC-FD-65-MT MT PLC-FD-65-MT MT PLC-FD-65-MT MT6 Driving Pin - Driving Pin Driving Pin Center Point PLC-FDP-65-N PLC-FDP-65-L PLC-FDP-65-R PLC-FDP-65-C Clockwise & Counter Clockwise Counter Clockwise Clockwise 60º Center Point 124 Call: Visit: sales@doriantool.com

125 CNC Steel Morse Taper Threaded Dead Center with 60 Steel Point CNC Steel Morse Taper Threaded Dead Center with 60 Extended Steel Point D Gage Dia. L1 L2 T Thread Morse Taper PLC-CNC-TDC-MT M36 x 1.5 MT PLC-CNC-TDC-MT M36 x 1.5 MT PLC-CNC-TDC-MT M48 x 1.5 MT5 D Gage Dia. C L1 L2 T Thread Morse Taper PLC-CNC-XTDC-MT x 1.5 MT PLC-CNC-XTDC-MT x 1.5 MT PLC-CNC-XTDC-MT x 1.5 MT5 Precision CNC Steel Morse Taper Dead Center with 60 Steel Point Precision CNC Steel Morse Taper Dead Center with 60 Partial Carbide Point D Gage Dia. L1 L2 Morse Taper PLC-MTDC-SMT MT PLC-MTDC-SMT MT PLC-MTDC-SMT MT PLC-MTDC-SMT MT PLC-MTDC-SMT MT PLC-MTDC-SMT MT6 D Gage Dia. C L1 L2 Morse Taper PLC-MTDC-CMT MT PLC-MTDC-CMT MT PLC-MTDC-CMT MT PLC-MTDC-CMT MT PLC-MTDC-CMT MT6 Precision CNC Steel Morse Taper Half Moon Dead Center with 60 Steel Point Precision CNC Steel Morse Taper Half Moon Dead Center with 60 Carbide Point D Gage Dia. B P L1 L2 Morse Taper PLC-HMDC-SMT MT PLC-HMDC-SMT MT PLC-HMDC-SMT MT PLC-HMDC-SMT MT PLC-HMDC-SMT MT PLC-HMDC-SMT MT6 D Gage Dia. B C P L1 L2 Morse Taper PLC-HMDC-CMT MT PLC-HMDC-CMT MT PLC-HMDC-CMT MT PLC-HMDC-CMT MT PLC-HMDC-CMT MT6 Precision CNC Steel Dead Center with Large 60 Carbide Point (Includes one 60º Intechangeable Steel Point) CNC Steel Threaded Dead Center for Interchangeable Point (Includes one 60º Intechangeable Steel Point) D Gage Dia. L1 L2 Morse Taper PLC-LPDC-CMT MT PLC-LPDC-CMT MT PLC-LPDC-CMT MT PLC-LPDC-CMT MT PLC-LPDC-CMT MT6 D Gage Dia. L1 L2 T Thread Morse Taper PLC-CNC-ITDC-MT M36 x 1.5 MT PLC-CNC-ITDC-MT M36 x 1.5 MT PLC-CNC-ITDC-MT M48 x 1.5 MT5 Call: Visit: sales@doriantool.com 125

126 High Speed Steel Morse Taper Extended Dead Center with 60 Carbide Point D C Gage Dia. L1 L PLC-XMTDC-C10-MT MT PLC-XMTDC-C14-MT MT PLC-XMTDC-C18-MT MT PLC-XMTDC-C10-MT MT PLC-XMTDC-C14-MT MT PLC-XMTDC-C18-MT MT PLC-XMTDC-C22-MT MT PLC-XMTDC-C10-MT MT PLC-XMTDC-C14-MT MT PLC-XMTDC-C18-MT MT PLC-XMTDC-C22-MT MT PLC-XMTDC-C26-MT MT PLC-XMTDC-C14-MT MT PLC-XMTDC-C18-MT MT PLC-XMTDC-C22-MT MT PLC-XMTDC-C26-MT MT PLC-XMTDC-C30-MT MT PLC-XMTDC-C14-MT MT PLC-XMTDC-C18-MT MT PLC-XMTDC-C22-MT MT PLC-XMTDC-C26-MT MT PLC-XMTDC-C30-MT MT Morse Taper Weight (lb) High Speed Steel Morse Taper Extended Half Moon Dead Center with 60 Carbide Point D Gage Dia. L1 L2 Morse Taper B C P PLC-XMTDC-HC10-MT MT PLC-XMTDC-HC14-MT MT PLC-XMTDC-HC18-MT MT PLC-XMTDC-HC10-MT MT PLC-XMTDC-HC14-MT MT PLC-XMTDC-HC18-MT MT PLC-XMTDC-HC22-MT MT PLC-XMTDC-HC10-MT MT PLC-XMTDC-HC14-MT MT PLC-XMTDC-HC18-MT MT PLC-XMTDC-HC22-MT MT PLC-XMTDC-HC26-MT MT PLC-XMTDC-HC14-MT MT PLC-XMTDC-HC18-MT MT PLC-XMTDC-HC22-MT MT PLC-XMTDC-HC26-MT MT PLC-XMTDC-HC30-MT MT PLC-XMTDC-HC14-MT MT PLC-XMTDC-HC18-MT MT PLC-XMTDC-HC22-MT MT PLC-XMTDC-HC26-MT MT PLC-XMTDC-HC30-MT MT Weight (lb) 126 Call: Visit: sales@doriantool.com

127 MODULAR BULL NOSE SYSTEM FOR PIPES High-Precision Double Needle Bearings Support the Extended Spindle Body. This Reduces Deflection, Increases Rigidity and Neutralizes Vibration. Extended Center Shaft for Extra Rigidity & Weight-Support. Heavy Duty Thrust-Bearing for Heavy Axial Loads. Lip Seal Prevents Coolant from Entering the Live Center. Modular Bull Nose Head Capacity range from 1 3/4 to 23 5/8 Precision Heavy Duty Taper Roller Bearing will Sustain Heavy Radial and Axial Loads without Compromising Precision Brass Seal Protects from Swarf & Coolant. Precision Ground Taper Nose.0001" TIR Between Nose and Morse Taper. Extraction Screw Simplified Changing the Bull Nose Heads. Extra Heavy Duty Modular Bull Nose Live Center CNC Modular Bull Nose Dead Center Morse Max. Max. workpiece Thrust Taper RPM weight (lb) load (lb) PLC-HDA-BN-MT PLC-HDA-BN-MT PLC-HDA-BN-MT PLC-HDA-BN-MT PLC-HDA-BN-MT6X Morse Taper Extractor Nut (sold separately) PLC-CNC-BNDC-MT PLC-CNC-BNDC-MT PLC-CNC-BNDC-MT PLC-CNC-BNDC-MT Modular Bull Nose Head Adapters PLCBN-HA PLCBN-HA PLCBN-HA PLCBN-HA PLCBN-HA PLCBN-HA PLCBN-HA PLCBN-HA PLCBN-HA PLCBN-HA PLCBN-HA A B L Nose Taper 60º 60º 60º 60º 60º 60º 60º 60º 60º 60º 60º INTEGRAL LIVE PIPE CENTERS NEW Live Pipe Center O.D. 60º OD in Live Pipe Center L in Morse Taper Max. workpiece weight Max. RPM Thrust load DPLC-MT MT lbs lbs DPLC-MT MT lbs lbs L DPLC-MT MT lbs lbs Call: Visit: sales@doriantool.com 127

128 HEAVY DUTY PIPE DRIVERS ENGINEERED TO PERFORM! Chuck Workpiece Pipe Dorian Positive Bidirectional Pipe Driver Dorian Bull Nose Live Center Dorian Modular Bull Nose Head Replaceable Hub Can be chucked on O.D. or I.D. Regrindable & Replaceable if damaged or scarred without needing to replace the pipe driver body Heat treated alloy steel Positive Pipe Driver Blades Indexable blades with 4 driving sides Hardened D2 Tool Steel (60HRc) Simple & Quick Installation Engages to pipe's I.D. with positive locking action Counter Clockwise Rotation 90º Grip Angle Clockwise Rotation Pipe Driver Body Heat treated alloy steel Holds the driving blades with a positive rake Blade slots are 45º to maximize grip & driving force 45º Bidirectional Driving Angle D2 D3 60º D1 D D2 D3 60º D1 D D2 D3 60º D1 D 1 3/4" to 23 5/8" Pipe ID Diameter Capacity L1 L2 L1 L2 L1 L2 Dorian Positive Pipe Driver No. Blade Dorian Bull Nose Cross-over D D1 D2 D3 L1 L2 Blades Included Range DPD PDB PLCBN-HA PLCBN-HA DPD PDB PLCBN-HA PLCBN-HA DPD PDB PLCBN-HA PLCBN-HA DPD PDB PLCBN-HA PLCBN-HA DPD PDB PLCBN-HA PLCBN-HA DPD PDB PLCBN-HA PLCBN-HA Call: Visit: sales@doriantool.com

129 SUPER QUICK CHANGE TOOL POST Rigidity, Repeatability & Quality Call: Visit:

130 The Triple Action Wedge-Locking System is a powerful combination of a downward, outward and inward force simultaneously locking the holder. Lock Double Taper Helix Locking Gear Tapered Gib F2 Outward 1. F1 Downward Force: (shown right) Rotating the locking gear moves the gib down, expanding the tool post dovetail to lock the toolholder. Un-Lock Locking Gear Angle Axis F1 Downward 2. F2 Outward Force: Wedge Style Sliding Gib (shown right) When the gibs make full contact with the toolholder dovetail, the double-angle helix of the locking gear forces the gib outward, neutralizing any backlash to zero. F3 Inward 3. F3 Inward Force: (shown right) The differential between the sliding gib angle and the quick change holder angle pulls the toolholder towards the tool post dovetail surface, creating a one-piece locking effect. 15º 15º Pulling Force Angle 60º 45º 45º Sliding Gib angle 60º Quick Change Toolholder Angle SDN25AXA SDN30BXA SDN35CXA SDN40CA SDN50DA SDN60EA THREAD Lathe Swing Over Bed A B C D E T-Tool Capacity 1/2-3/4 5/ / ¼ 1¼-1½ 1 1/2 Optimum Center Height Minimum Center Height Maximum Center Height Holding Post Thread 1/2-20 5/8-18 3/4-16 7/ ⅛-12 * Optimum center height is calculated with the smaller tool System of the tool capacity. If the higher System tool is to be used, add 1/8 to the optimum center height. C.H. T E D A-SQUARE B C 130 Call: Visit: sales@doriantool.com

131 No. D1 Turning & Facing Tool holder T A T C D E F G D25AXA D30BXA D35CXA D40CA D50DA D60EA No. D2 Turning, Facing & Boring Tool holder The V groove makes this holder more versatile so that it can hold either square shank tool holders or boring bars.. T A T C D E F G G1 D25AXA D30BXA D35CXA D40CA D50DA D60EA Call: Visit: sales@doriantool.com 131

132 Dual Boring Bar Quick Change Holder with the Double Locking System NEW For Precise Set-up and Maximum Rigidity Boring Bar Center Line Set-up Set Screw Locking System 360 Collar Locking System Maximum Locking force No Boring Bar Damage Quick Release For boring Bars with flats Use this screw to position and lock center line Quick Lock Boring Bar Center Line Set-up Boring Bar with Flat Boring Bar 360 Collar Locking System 360 Collar Locking System Boring Bar Releasing Screw Ground flat screw, for precise insert center heights alignment and not to damage boring bar flats For Boring Bar with no flats do not use this screw to position or lock. Boring Bar without Flat 360 Collar Locking System 132 Call: Visit:

133 No. D4-DUAL Heavy Duty Boring Bar Tool holder B A Boring Bar Capacity B C D E F G D25AXA DUAL D30BXA DUAL D35CXA DUAL D40CA DUAL D50DA DUAL D60EA DUAL No. D41-DUAL Extra Heavy Duty Boring Bar Tool holder B A Boring Bar Capacity B C D E F G D25AXA DUAL D30BXA DUAL D35CXA DUAL D40CA DUAL D50DA DUAL D60EA DUAL No. DQ41S-DUAL Super Over Sized Boring Bar Tool holder B A Boring Bar Capacity B C D E F G DQ35CXA-41S-1500-DUAL DQ40CA-41S-2000-DUAL DQ50DA-41S-2500-DUAL DQ60EA-41S-3000-DUAL Call: Visit: sales@doriantool.com 133

134 No. D5 Morse Taper Tool holder. M.T. A Morse Taper C D E F G D35CXA MT D40CA MT D50DA MT D60EA MT No. D7-71C Extra Heavy Duty Cut-Off Blade Tool holder C T D A Slot Grip Blade T C D E F G D25AXA-7-71C SGIH D30BXA-7-71C D35CXA-7-71C SGIH D40CA-7-71C to D50DA-7-71C SGIH D60EA-7-71C to No. D35 Drill Chuck Tool holder T A T Capacity C D E F G D25AXA D30BXA D35CXA D40CA Call: Visit: sales@doriantool.com

135 No. D881 O.D. and I.D. Threading Toolholder D881 Threading Toolholder I.D. Threading Bar Sold Seperately *External Laydown Insert Cartridge *External On Edge Insert Cartridge Internal Threading Bar Reference Tool Post Desription Insert Min. Bore 25,30,35,40 NL50R IR-A ,30,35,40 NL75R IR-AG ,40 NL125R IR-N * Holder is supplied standard with External On Edge Insert Cartridge. * The External Laydown Insert Cartridge is sold separately. * Internal threading bar sold separately. * Inserts not included. A C D E F G *External On Edge Insert Cartridge TNMC Insert Torx Screw *External Laydown Insert Cartridge Torx Key Insert Torx Screw Torx Key D25AXA-881-OE D30BXA-881-OE D35CXA-881-OE D40CA-881-OE TIH GTS-1M T-10 NL253-3R ER-AG60 TS-16 T-10 TIH GTS-1M T-10 NL354-3R ER-AG60 TS-16 T-10 No. D36 5C Collet Toolholder A C D E F G D25AXA D30BXA D35CXA D40CA Call: Visit: sales@doriantool.com 135

136 Turning Set Includes (1) Tool Post (4) Holders Tooling Not Included D1 D1 D2 D SDN25AXA-TS SDN30BXA-TS SDN35CXA-TS SDN40CA-TS SDN50DA-TS SDN60EA-TS Set Includes (1) Tool Post SDN25AXA SDN30BXA SDN35CXA SDN40CA SDN50DA SDN60EA (4) Holders (2) D25AXA-1 (2) D25AXA-2 (2) D30BXA-1 (2) D30BXA-2 (2) D35CXA-1 (2) D35CXA-2 (2) D40CA-1 (2) D40CA-2 (2) D50DA-1 (2) D50DA-2 (2) D60EA-1 (2) D60EA-2 Standard Set Includes (1) Tool Post (4) Holders Tooling Not Included D1 D2 D4-CNC D7-71C SDN25AXA-INSS SDN30BXA-INSS SDN35CXA-INSS SDN40CA-INSS SDN50DA-INSS SDN60EA-INSS Set Includes (1) Tool Post SDN25AXA SDN30BXA SDN35CXA SDN40CA SDN50DA SDN60EA (4) Holders (1) D25AXA-1 (1) D25AXA-2 (1) D25AXA-4-CNC (1) D25AXA-7-71C (1) D30BXA-1 (1) D30BXA-2 (1) D30BXA-4-CNC (1) D30BXA-7-71C (1) D35CXA-1 (1) D35CXA-2 (1) D35CXA-4-CNC (1) D35CXA-7-71C (1) D40CA-1 (1) D40CA-2 (1) D40CA-4-CNC (1) D40CA-7-71C (1) D50DA-1 (1) D50DA-2 (1) D50DA-4-CNC (1) D50DA-7-71C (1) D60EA-1 (1) D60EA-2 (1) D60EA-4-CNC (1) D60EA-7-71C SUPER Quick Change First Time Buyer Set Includes FREE TOOLING Set Includes: (1) Tool Post (4) Holders (4) Toolholders FREE (5) Inserts FREE 1ea. D1 + Free Toolholder & 1 Free TCMT Turning Insert 1ea. D7-71C + Free Blade & 1 Free Cut-off Insert 1ea. D2 + Free Boring Bar & 1 Free TCMT Turning Insert 1ea. D881 + Free ID Threading Bar & 1 Free TNMC OnEdge & 1 Free Laydown Threading Inserts SDN25AXA-FTB SDN30BXA-FTB SDN35CXA-FTB SDN40CA-FTB Set Includes (1) Tool Post SDN25AXA SDN30BXA SDN35CXA SDN40CA (4) Holders Free Tooling (4)Toolholders (5) Inserts D25AXA-1 D25AXA-2 D25AXA-7-71C D25AXA-881-OE STNCR08-2J STCMB06-2 SGIH19-2 NL50R TCMT PEM-DPC25UT TCMT PEM-DPC25UT SGTN-2-DC656 TNMC-32NV-DVP656 11IR-A60-DVP656 D30BXA-1 D30BXA-2 D30BXA-7-71C D30BXA-881-OE STNCR10-2A STCMB08-2 SGIH19-2 NL50R TCMT PEM-DPC25UT TCMT PEM-DPC25UT SGTN-2-DC656 TNMC-32NV-DVP656 11IR-A60-DVP656 D35CXA-1 D35CXA-2 D35CXA-7-71C D35CXA-881-OE STNCR12-3B STCMB10-2 SGIH26-3 NL75R TCMT PEM-DPC25UT TCMT PEM-DPC25UT SGTN-3-DC656 TNMC-32NV-DVP656 16IR-A60-DVP656 D40CA-1 D40CA-2 D40CA-7-71C D40CA-881-OE STNCR64-3D STCMB12-3 SGIH26-3 NL75R TCMT PEM-DPC25UT TCMT PEM-DPC25UT SGTN-3-DC656 TNMC-32NV-DVP656 16IR-A60-DVP Call: Visit: sales@doriantool.com

137 QUADRA INDEXING QUICK CHANGE Strong Rigid, Quick & PRECISE 4 Toolholders Held Simultaneously! Combination O.D. & I.D. Operations O.D. Chamfering Operations 15º Increments I.D. Turning Operations O.D. Turning Operations Call: Visit: sales@doriantool.com 137

138 NEW LOCKING & INDEXABLE SYSTEM with 24 SUPER PRECISE POSITIONING BALL BEARINGS & 2 PRE-LOADED INDEXING PINS Tool Post Indexing Indexing Flexibility every Locking Positions Multi-position of the locking handle Instant Tool Repositioning From Prototypes to High Production Quick Change Tool Holders 4 Tool Holders Locked Simultaneously 1 to 4 Tool Holders ready to be used Positive Lock with absolute zero backlash Tool holder repeatability within.0001" Indexing repeatability within.00005" Tool Post Application 6 sizes of Tool Post available From tool room to oil country lathes Quick and versatile for finishing Strong for heavy-duty roughing Easy to install Maintenance free QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N Lathe Swing Over Bed 12" 13-15" 14-17" 16-20" 17-32" 25-XHD A B C D E T-Tool Capacity 1/2-3/4 5/ / ¼ 1¼ - 1½ 1 ½ Optimum Center Height* Min.Center Height Max.Center Height Holding Post Thread 1/2-20 1/2-20 5/8-18 3/ ⅛-12 *Optimum center height is calculated with the smaller tool System of the tool capacity. CENTER HEIGHT 138 Call: Visit: sales@doriantool.com

139 No. QITPN-1 Turning & Facing Tool holder 1 T 4 3 A T C D E F G QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N No. QITPN-2 Turning, Facing & Boring Tool holder The V groove makes this holder more versatile so that it can hold either square shank tool holders or boring bars T 4 3 A T C D E F G G1 QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N No. QITPN-7-71C Extra Heavy Duty Cut-Off Blade Tool holder 1 T C D 4 3 A Slot Grip Blade T C D E F G QITP25N-7-71C SGIH QITP30N-7-71C QITP35N-7-71C SGIH QITP40N-7-71C to QITP50N-7-71C SGIH QITP60N-7-71C to Call: Visit: sales@doriantool.com 139

140 2 2 2 No. QITPN-4-DUAL Heavy Duty Boring Bar Tool holder 1 E A CH B 4 3 A Boring Bar Capacity B C D E F G QITP25N DUAL QITP30N DUAL QITP35N DUAL QITP40N DUAL QITP50N DUAL QITP60N DUAL No. QITPN-41-DUAL Extra Heavy Duty Boring Bar Tool holder 1 E A CH B 4 3 A Boring Bar Capacity B C D E F G QITP35N DUAL QITP40N DUAL QITP50N DUAL QITP60N DUAL No. DQ-41S-DUAL Super Over Sized Boring Bar Tool holder 1 E A CH B 4 3 A Boring Bar Capacity B C D E F G DQ35CXA-41S-1500-DUAL DQ40CA-41S-2000-DUAL DQ50DA-41S-2500-DUAL DQ60EA-41S-3000-DUAL Call: Visit: sales@doriantool.com

141 2 2 2 No. QITPN-5 Morse Taper Tool holder 1 M.T. 4 3 A Morse Taper C D E F G QITP35N MT QITP40N MT QITP50N MT QITP60N MT No. QITPN-881 O.D. and I.D. Threading Toolholder D881 Threading Toolholder I.D. Threading Bar Sold Seperately *External Laydown Insert Cartridge Internal Threading Bar *External On Edge Insert Cartridge Reference Tool Post Desription Insert Min. Bore 1 25,30,35,40 NL50R IR-A ,30,35,40 NL75R IR-AG ,40 NL125R IR-N * Holder is supplied standard with External On Edge Insert Cartridge. * The External Laydown Insert Cartridge is sold separately. * Internal threading bar sold separately. * Inserts not included. A C D E F G QITP25N-881-OE QITP30N-881-OE QITP35N-881-OE QITP40N-881-OE No. QITPN-36 5C Collet Tool holder 1 4 *External On Edge Insert Cartridge TNMC Torx Insert Screw *External Laydown Insert Cartridge Torx Screw 3 Torx Key Insert TIH GTS-1M T-10 NL253-3R ER-AG60 TS-16 T-10 TIH GTS-1M T-10 NL354-3R ER-AG60 TS-16 T-10 Torx Key A C D E F G QITP25N QITP30N QITP35N QITP40N Call: Visit: sales@doriantool.com 141

142 Quadra Indexing Quick Change Tool Post Turning Set Turning Set Includes (1) Tool Post (4) Holders Tooling Not Included QITPN-1 QITPN-1 QITPN-2 QITPN QITP25N-TS QITP30N-TS QITP35N-TS QITP40N-TS QITP50N-TS QITP60N-TS Set Includes (1) Tool Post QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N (4) Holders (2) QITP2N5-1 (2) QITP25N-2 (2) QITP30N-1 (2) QITP30N-2 (2) QITP35N-1 (2) QITP35N-2 (2) QITP40N-1 (2) QITP40N-2 (2) QITP50N-1 (2) QITP50N-2 (2) QITP60N-1 (2) QITP60N-2 Standard Set Includes (1) Tool Post (4) Holders Tooling Not Included QITPN-1 QITPN-2 QITPN-4-DUAL QITPN-7-71C QITP25N-INSS QITP30N-INSS QITP35N-INSS QITP40N-INSS QITP50N-INSS QITP60N-INSS Set Includes (1) Tool Post QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N (4) Holders (1) QITP25N-1 (1) QITP25N-2 (1) QITP25N-4-CNC (1) QITP25N-7-71C (1) QITP30N-1 (1) QITP30N-2 (1) QITP30N-4-CNC (1) QITP30N-7-71C (1) QITP35N-1 (1) QITP35N-2 (1) QITP35N-4-CNC (1) QITP35N-7-71C (1) QITP40N-1 (1) QITP40N-2 (1) QITP40N-4-CNC (1) QITP40N-7-71C (1) QITP50N-1 (1) QITP50N-2 (1) QITP50N-4-CNC (1) QITP50N-7-71C (1) QITP60N-1 (1) QITP60N-2 (1) QITP60N-4-CNC (1) QITP60N-7-71C Quadra First Time Buyer SET Includes FREE TOOLING Set Includes: (1) Tool Post (4) Holders (4) Toolholders FREE (5) Inserts FREE 1ea. QITPN-1 + Free Toolholder & 2 Free TCMT Turning Inserts 1ea. QITPN-7-71C + Free Toolholder & 1 Free SGTN Cut-off Inserts 1ea. QITPN-2 + Free Toolholder & 1 Free 11/16IR-A60 Laydown inserts 1ea. QITPN Free Toolholder & 1 Free TNMC OnEdge Inserts QITP25N-FTB QITP30N-FTB QITP35N-FTB QITP40N-FTB Set Includes (1) Tool Post QITP25N QITP30N QITP35N QITP40N (4) Holders Free Tooling (4)Toolholders (5) Inserts QITP25N-1 QITP25N-2 QITP25N-7-71C QITP25N-881-OE STNCR08-2J STCMB06-2 SGIH19-2 NL50R TCMT PEM-DPC25UT TCMT PEM-DPC25UT SGTN-2-DC656 TNMC-32NV-DVP656 11IR-A60-DVP656 QITP30N-1 QITP30N-2 QITP30N-7-71C QITP30N-881-OE STNCR10-2A STCMB08-2 SGIH19-2 NL50R TCMT PEM-DPC25UT TCMT PEM-DPC25UT SGTN-2-DC656 TNMC-32NV-DVP656 11IR-A60-DVP656 QITP35N-1 QITP35N-2 QITP35N-7-71C QITP35N-881-OE STNCR12-3B STCMB10-2 SGIH26-3 NL75R TCMT PEM-DPC25UT TCMT PEM-DPC25UT SGTN-3-DC656 TNMC-32NV-DVP656 16IR-A60-DVP656 QITP40N-1 QITP40N-2 QITP40N-7-71C QITP40N-881-OE STNCR64-3D STCMB12-3 SGIH26-3 NL75R TCMT PEM-DPC25UT TCMT PEM-DPC25UT SGTN-3-DC656 TNMC-32NV-DVP656 16IR-A60-DVP Call: Visit: sales@doriantool.com

143 MODULAR CNC ADJUSTABLE ANGLE HEADS Advanced design & State of the Art Technology! Choose from two styles (Universal and 90º) and six models for any milling, drilling, tapping and face milling operations. Call: Visit:

144 PLCNC-AAH-ER25 - Pivoting Modular CNC Angle Head 4000 rpm max. ER25 Collet System 11 lb.ft. torque 1 to 1 Driving Ratio 5/8" max tool shank size 14.5 lb weight Automatic tool change capability Capable of machining in two axial positioning angles Designed to perform any CNC medium duty operations Interchangeable spindle taper holder for CAT, ISO & BT Spindles BT ISO CAT ATC Release Stroke.197" 5mm 3.030" 77mm ATC Release Stroke.197" 5mm 3.030" 77mm A A Drill " 4.350" 110.5mm 110.5mm Tap Milling 3.563" 0.5mm 3.563" 90.5mm 6.004" 6.004" 152.5mm 152.5mm 2.091" 53.1mm Milling 1.969" 50mm 1.969" 50mm 3.917" 99.5mm R mm 3.917" 99.5mm R mm 1.654" 42mm 2.087" 53mm 3.937" 100mm 2.944" 74.8mm 2.944" 74.8mm Min. Bore Size Min. ØBore Ø5.984 Ø5.9 Ø152mm Ø152 4" m 4.094" 104mm 7.776" 7.776" 197.5mm 197.5mm Style Torque Nm Ib.ft Driving Ratio Max RPM A Gage Line Collet Size Max. Tool Cap. Dia. Max. Tap Size *Max Slotting Cutter I.D. **Weight ISO40-DIN69871 PLCNC-AAH-ER25-40DIN BT40 PLCNC-AAH-ER25-BT CAT40 PLCNC-AAH-ER25-CAT To ISO50-DIN69871 PLCNC-AAH-ER25-50DIN ER BT50 PLCNC-AAH-ER25-BT CAT50 PLCNC-AAH-ER25-CAT ** The weights of the angle heads do not include spindle taper holders. 144 Call: Visit: sales@doriantool.com

145 PLCNC-AAH-ER32 - Pivoting Modular CNC Angle Head 3500 RPM max. ER32 Collet System 30 lb.ft. torque 1 to 1 Driving Ratio 3/4 max tool shank size 46 lb weight Automatic tool change capability Designed to perform any CNC heavy duty operations Capable of machining in two axial positioning angles Interchangeable spindle taper holder for CAT, ISO & BT Spindles BT ISO CAT ATC Release Stroke.197" 5mm 4.252" 108mm ATC Release Stroke.197" 5mm 4.252" 108mm A A Drill mm mm Tap Milling 4.961" 126mm 4.961" 126mm 7.874" 200mm 7.874" 200mm 2.874" 73mm Milling 2.579" 65.5mm 2.579" 65.5mm 5.118" 130mm R mm 5.118" 130mm R mm 1.969" 50mm 2.874" 73mm 5.157" 131mm Min. Bore Size Min. ØB Bore Size ØB Ø7.756 Ø7.756 Ø197mm Ø197mm 5.669" 144mm 5.669" 144mm " 259mm " 259mm Style Torque Nm Ib.ft Driving Ratio Max RPM A Gage Line Collet Size Max. Tool Cap. Dia. Max. Tap Size *Max Slotting Cutter I.D. **Weight ISO40-DIN69871 PLCNC-AAH-ER32-40DIN BT40 PLCNC-AAH-ER32-BT CAT40 PLCNC-AAH-ER32-CAT to ISO50-DIN69871 PLCNC-AAH-ER32-50DIN ER BT50 PLCNC-AAH-ER32-BT CAT50 PLCNC-AAH-ER32-CAT ** The weights of the angle heads do not include spindle taper holders. Call: Visit: sales@doriantool.com 145

146 90CNC-AAH-ER16-90º Modular CNC Angle Head 4000 RPM max. ER16 Collet System 5 lb.ft. torque 1 to 1 Driving Ratio 3/8 max tool shank size 14.5 lb weight Automatic tool change capability Fixed 90º angle head with 0-360º circular rotation Designed for precision machining for small to medium tool applications Interchangeable spindle taper holder for CAT, ISO & BT Spindles BT ISO CAT ATC Release Stroke.197" 5mm 3.031" 77mm 0 Drill A Tap Milling 3.070" 78mm mm 4.527" 115mm Milling 1.181" 30mm 2.244" 57mm mm 1.260" 32mm 1.969" 50mm 4.094" 104mm Min. Bore Size ØB Ø3.602 Ø91.5mm 6.142" 156mm Style Torque Nm Ib.ft Driving Ratio Max RPM A Gage Line Collet Size Tool Cap. Dia. Max. Tap Size *Max Slotting Cutter I.D. ** Weight ISO40-DIN CNC-AAH-ER16-40DIN BT40 90CNC-AAH-ER16-BT CAT40 90CNC-AAH-ER16-CAT to ISO50-DIN CNC-AAH-ER16-50DIN ER BT50 90CNC-AAH-ER16-BT CAT50 90CNC-AAH-ER16-CAT ** The weights of the angle heads do not include spindle taper holders. 146 Call: Visit: sales@doriantool.com

147 90CNC-AAH-ER25-90º Modular CNC Angle Head 3500 RPM max. ER25 Collet System 15 lb.ft. torque 1 to 1 Driving Ratio 5/8 max tool shank size 14.5 lb weight Automatic tool change capability Designed to perform any CNC medium duty operations Fixed 90º angle head with 0-360º circular rotation Interchangeable spindle taper holder for CAT, ISO & BT Spindles BT ISO CAT 3.307" ATC 84mm Release Stroke3.307" 3.307" ATC ATC 84mm 84mm.197" Release Release 5mm Stroke Stroke.197".197" 5mm 5mm A Drill A A 3.543" 90mm Tap Milling 2.244" 57mm 3.543" 3.543" 90mm 90mm 2.098" 53.3mm Milling 2.244" 2.244" 57mm 57mm 1.988" 50.5mm 2.854" 72.5mm 1.988" 1.988" 2.854" 2.854" 50.5mm 50.5mm72.5mm 72.5mm " 30mm53.3mm mm 30mm 1.378" 35mm 2.402" 61mm 1.378" 35mm 2.402" 61mm 4.685" 119mm 4.685" 119mm Min. Bore Size ØB Ø5.157 Ø131mm Min. Bore Size ØB Ø5.157 Ø131mm 6.988" 177.5mm 6.988" 177.5mm Style Torque Nm Ib.ft Driving Ratio Max RPM A Gage Line Collet Size Tool Cap. Dia. Max. Tap Size *Max Slotting Cutter I.D. ** Weight ISO40-DIN CNC-AAH-ER25-40DIN BT40 90CNC-AAH-ER25-BT CAT40 90CNC-AAH-ER25-CAT to ISO50-DIN CNC-AAH-ER25-50DIN ER BT50 90CNC-AAH-ER25-BT CAT50 90CNC-AAH-ER25-CAT ** The weights of the angle heads do not include spindle taper holders. Call: Visit: sales@doriantool.com 147

148 90CNC-AAH-ER32-90º Modular CNC Angle Head 3500 RPM max. ER32 Collet System 30 lb.ft. torque 1 to 1 Driving Ratio 3/4" max tool shank size 44 lb weight Automatic tool change capability Designed for any fixed 90º heavy duty operations Fixed 90º angle head with 0-360º circular rotation Interchangeable spindle taper holder for CAT, ISO & BT Spindles BT ISO CAT 4.252" ATC 108mm Release 4.252" ATC 108mm Stroke Release.197" Stroke 5mm.197" 5mm A Drill 3.622" 92mm 3.622" 92mm 3.228" 82mm 3.228" 82mm 4.853" 123mm 4.853" 123mm A 4.587" 116.5mm 4.587" 116.5mm mm mm 2.638" 67mm 2.638" 67mm 2.756" 70mm 2.756" mm 95mm mm Tap Milling Milling 299" 0mm 6.299" 160mm 6.299" 160mm 9.921" 252mm Min. Bore Size ØB Ø8.464 Ø215mm Min. Bore Size ØB Ø8.464 Ø215mm Min. Bore Size ØB Ø8.464 Ø215mm 9.921" 252mm 9.921" 252mm Style Torque Nm Ib.ft Driving Ratio Max RPM A Gage Line Collet Size Tool Cap. Dia. Max. Tap Size *Max Slotting Cutter I.D. ** Weight ISO40-DIN CNC-AAH-ER32-40DIN BT40 90CNC-AAH-ER32-BT CAT40 90CNC-AAH-ER32-CAT to ISO50-DIN CNC-AAH-ER32-50DIN ER BT50 90CNC-AAH-ER32-BT CAT50 90CNC-AAH-ER32-CAT ** The weights of the angle heads do not include spindle taper holders. 148 Call: Visit: sales@doriantool.com

149 90CNC-AAH-TP40-90º Modular CNC Angle Head 2000 RPM max. 30 lb.ft. torque 1 to 1 Driving Ratio 3/4 max tool shank size 44 lb weight Automatic tool change capability Engineered to accept any CAT, ISO, or BT-40 taper holder Designed to perform any CNC heavy duty operations Fixed 90º angle head with 0-360º circular rotation Interchangeable spindle taper holder for CAT, ISO & BT Spindles BT ISO CAT ATC Release ATC Stroke Release.197" Stroke 5mm.197" 5mm 4.252" 108mm 4.252" 108mm A A 40 Taper Collet Chuck 3.622" 92mm 3.622" 92mm 3.740" 95mm 3.740" 95mm 3.937" 100mm 3.937" 100mm 4.587" 116.5mm 4.587" 116.5mm mm mm 2.638" 67mm 2.638" 67mm 2.756" 70mm 2.756" 70mm 3.740" 95mm 3.740" 95mm 40 Taper End Mill Holder 40 Taper Shell Mill Holder 6.299" 160mm 6.299" 160mm 6.299" 160mm 9.016" 229mm Min. Bore Size ØB Ø7.874 Ø200mm Min. Bore Size ØB Min. Ø7.874 Bore Size ØB Ø200mm Ø7.874 Ø200mm 9.016" 229mm 9.016" 229mm Style ISO40-DIN CNC-AAH-TP40-40DIN Torque Driving A * Weight Max RPM Output Nm Ib.ft Ratio Gage Line Kg Lb BT40 90CNC-AAH-TP40-BT CAT40 90CNC-AAH-TP40-CAT to ISO50-DIN CNC-AAH-TP40-50DIN BT50 90CNC-AAH-TP40-BT CAT50 90CNC-AAH-TP40-CAT ISO40 CAT40 BT * The weights of the angle heads do not include spindle taper holders. Call: Visit: sales@doriantool.com 149

150 Spindle Taper Holders CAT-BT-ISO 40/50 X L C ISO-DIN2080 ØH Style ISO40-DIN2080 ISO50-DIN2080 AHIS040-DIN2080 AHIS050-DIN C H M16 M24 L X X L C CAT ØH Style CAT40 CAT50 AHCAT40 AHCAT C H 5/ L X X L C ØH Style ISO40-DIN69871 ISO50-DIN69871 AHIS040-DIN69871 AHIS050-DIN C H M16 M24 L X X L C Style BT40 BT50 AHBT40 AHBT C H M16 M24 L X ISO-DIN69871 BT ER 25 & ER 32 Wrench ER 25 & ER 32 Collet Nut ER16 Wrench ER16 Collet Nut ER Standard Collet Nut Wrench Style Type ER16 ER16STWR-AAH ER Standard Wrench ER 25 ER25STWR ER Standard Wrench ER 32 ER32STWR ER Standard Wrench ER Standard Collet Nuts (Dimensions are in mm) Style Body Dia. Length Thread ER 16 ER16NTS M24X1.0 ER 25 ER25NTS M32x1.5 ER 32 ER32NTS ,5 M40x1.5 R8 Angle Milling Attachment for Vertical Milling Machines 5 Features Output For Manual Machines Ductile Iron Body Precision Hardened & Ground Spiral Bevel Gears Sealed High Speed Bearings 1.33 to 1 Gear Ratio Grease Fitting R8 3 3/8" Quill with R8 Taper MMRAA-R Alignment Flats on 2 Sides R-8 Collet Spindle Draw Bar Hex Length Bar Length Standard Draw Bars Machine Type Bar Length Hex Length 1 J Head Bridgeport Step Pully SDB-1J J Head Bridgeport Variable Speed SDB-2J Aliant-Sharp SDB-AS Index Lagun SDB-IL Special Draw Bars to be used with R8 Milling Attachment Machine Type Bar Length Hex Length Bridgeport Kondia BDBRA-2J Index Lagun ILBRA Alliant-Sharp ADBRA Call: Visit: sales@doriantool.com

151 V-FLANGE TOOLING QUALITY, SPEED & PERFORMANCE Call: Visit:

152 Precision Balanced to 12,000 RPM Each holder comes with a Certificate of Inspection End Mill Holders Hole Dia. (d) (in) Gage Length (L) (in) Body Dia. (D) (in) CAT40 EMH / CAT40 EMH / CAT40-EMH / CAT40 EMH / CAT40 EMH / CAT40 EMH / CAT40 EMH / CAT40 EMH CAT40 EMH CAT50 EMH / CAT50 EMH / CAT50 EMH / CAT50 EMH CAT50 EMH Taper-Bore Runout Tolerance. Made of 8620 Alloy Steel with Case Hardness of HRC and Core Tapers Ground to AT-3 Specifications or BETTER. H5 Bore Tolerance for air-tight fit provides maximum contact surface area. Thru Coolant Feature Made In Italy CAT50 EMH / CAT50 EMH / CAT50 EMH / CAT50 EMH / Precision Balanced to 12,000 RPM Each holder comes with a Certificate of Inspection Shell Mill Holders Arbor Dia (d) (in) Arbor Length (L1) (in) Gage Length (L) (in) Body Dia (D) (in) Arbor Thread Key Size (AT) (in) (in) CAT40 SMH / /8-24 5/ CAT40 SMH /2-20 3/ CAT40 SMH / /8-18 1/ CAT40 SMH / /4-16 5/ CAT50 SMH / /8-24 5/ CAT50 SMH /2-20 3/ CAT50 SMH / /8-18 1/ CAT50 SMH / /4-16 5/ CAT50 SMH / Taper-Arbor Runout Tolerance. Made of 8620 Alloy Steel with Case Hardness of HRC and Core Hardness of HRC. Tapers Ground to AT-3 Specifications or BETTER. H5 Arbor Tolerance. Made In Italy. 152 Call: Visit: sales@doriantool.com

153 Precision Balanced to 12,000 RPM Each holder comes with a Certificate of Inspection.0001 Taper-Bore Runout Tolerance. Made of 8620 Alloy Steel with Case Hardness of HRC and Core Hardness of HRC. Tapers Ground to AT-3 Specifications or BETTER Thru Coolant Feature. Made In Italy. ER Collet Holder Collet Series Collet Range (in) Nose Dia. (D) (in) Gage Length (L) (in) CAT40 ER11H-2500 ER CAT40 ER11H-4000 ER CAT40 ER11H-6000 ER CAT40 ER16H-2500 ER CAT40 ER16H-4000 ER CAT40 ER16H-6000 ER CAT40 ER20H-2500 ER CAT40 ER20H-4000 ER CAT40 ER20H-6000 ER CAT40 ER25H-2500 ER CAT40 ER25H-4000 ER CAT40 ER25H-6000 ER CAT40 ER32H-2500 ER CAT40 ER32H-4000 ER CAT40 ER32H-6000 ER CAT40 ER40H-2500 ER CAT40 ER40H-4000 ER CAT50 ER16H-4120 ER16.019" -.406" CAT50 ER25H-4000 ER25.039" -.629" CAT50 ER25H-6000 ER25.039" -.629" CAT50 ER32H-4000 ER32.078" -.787" CAT50 ER32H-6000 ER32.078" -.787" CAT50 ER32H-8000 ER32.078" -.787" Provides exceptionally high torque - up to three times the gripping strength of conventional drill chucks. Features a corrosion-resistant surface treatment to ensure durability. Chuck will not come off during operation. Replaceable chuck. Integral Keyless Drill Chuck Holders Capacity Gage Length (L) (in) Body Dia. (D) (in) CAT40-KDCH-13 1/32-1/ CAT40-KDCH-16 1/8-5/ Spare Parts ER Standard Nuts ER Standard Wrench Style Thread Height (mm) Body Dia. (mm) Style Wrench Type ER11 ER11NTM M13 X ER16 ER16NTS M22 X 1, ER20 ER20NTS M25 X 1, ER25 ER25NTS M32 X 1, ER32 ER32NTS M40 X 1,5 22,5 50 ER40 ER40NTS M50 X 1,5 25,5 63 ER11 ER11MNWR ER Mini ER16 ER16STWR ER Standard ER20 ER20STWR ER Standard ER25 ER25STWR ER Standard ER32 ER32STWR ER Standard ER40 ER40STWR ER Standard Call: Visit: sales@doriantool.com 153

154 RETENTION KNOBS Style 1 Style 2 Style 4 Style 5 CAT 40 Machine Used on Thru Coolant Style Threads TPI A Angle D1 Knob Dia. D2 Neck Dia. D3 Hole Dia. D4 Pilot Dia. L OAL Shoulder L1 t L RKCT MAZAK, FADAL, DMG, HURCO NA 4 5/ NA RKCT C FADAL, DMG, HURCO Coolant 4 5/ RKCT MORI SEIKI, OKK, KIRA NA 1 5/ NA RKCT BRIDGEPORT, LEADWELL NA 1 5/ NA RKCT HAAS, CHEVALIER, FEELER, FRYER, JOHNFORD NA 1 5/ NA RKCT C HAAS, CHEVALIER, FEELER, FRYER, JOHNFORD Coolant 1 5/ RKCT MAKINO, MITSUBISHI, ENSHU, HITACHI, KIRA, OKUMA, MILLTRONICS NA 1 5/ NA RKCT C MAZAK, FADAL, DMG, HURCO Coolant 4 5/ RKCT C MAKINO Coolant 5 5/ RKCT C MORI SEIKI Coolant 2 5/ RKCT C KITAMURA, DOOSAN, HYUNDAI, KIA Coolant 2 5/ CAT 50 Machine Used on Thru Coolant Style Threads TPI A Angle D1 Knob Dia. D2 Neck Dia. D3 Hole Dia. D4 Pilot Dia. L OAL Shoulder L1 t L RKCT MAZAK, DMG, G&L, HURCO, FADAL, WALTER GRINDERS NA NA RKCT C MAZAK, DMG, G&L, HURCO, FADAL Coolant RKCT C OKK Coolant RKCT C OKUMA, HITACHI, SNK, TOSHIBA Coolant RKCT OKUMA, HITACHI, SNK, TOSHIBA NA NA RKCT C HAAS, MILLTRONICS, VIPER, ENSHU, AWEA Coolant RKCT HAAS, MILLTRONICS, VIPER, ENSHU, AWEA NA NA RKCT C DOOSAN, HYUNDAI, KIA Coolant RKCT C TOYODA Coolant RKCT MORI SEIKI, OKK, YANG NA NA RKCT C MAKINO Coolant Call: Visit: sales@doriantool.com

155 MILLING DRILLING REAMING TAPPING 100% Inspection: Each and every collet is inspected to be precise within.0002 or better prior to shipping. Maximum Contact Surface Area: Each Dorian ER Collet features 16 full length slits (instead of competition s 8), enabling the collet to collapse uniformly to provide a concentric and full 360 gripping surface. 16 Slits for Uniform Gripping Material: Premium Grade Special Alloy Steel with high a modulus of elasticity. Combined with the 16-slit design, this material provides full surface contact on the tool when collapsed. Inch and Metric Sizes: Choice of Inch and Metric sizes optimizes contact surface area for ultra high precision applications. Ultra Precision " TIR Ultra Precision ER 11 Collets Holding Capacity ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC ER11-STIMC Ultra Precision ER 16 Collets Holding Capacity ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC ER16-STIMC Ultra Precision ER 20 Collets Holding Capacity ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC ER20-STIMC Call: Visit: sales@doriantool.com 155

156 Ultra Precision ER 25 Collets Holding Capacity ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC ER25-STIMC Ultra Precision ER 32 Collets Holding Capacity ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC ER32-STIMC Ultra Precision ER 40 Collets Holding Capacity ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC ER40-STIMC Ultra Precision ER Collets-Sets Piece per set Collet Size ER11-MCS-13C , 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7 ER16-MCS-10C , 2, 3, 4, 5, 6, 7, 8, 9, 10 ER20-MCS-12C , 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ER25-MCS-15C , 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,14, 15, 16 ER32-MCS-18C , 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,14, 15, 16, 17, 18, 19, 20 ER40-MCS-23C , 5, 6, 7, 8, 9, 10, 11, 12, 13,14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, Call: Visit: sales@doriantool.com

157 TOOL PRESETTER & TIGHTENING FIXTURES PRECISION, PERFORMANCE & EFFICIENCY Call: Visit:

158 The QuiK-SET Tool Presetter Is a precision instrument designed for speed and simplicity in manufacturing environments or tool cribs. This model has been carefully designed to meet the needs of the CNC machine operator. Its portability and ruggedness make this the best presetter for small machining cells. The pre-loaded recirculating ball bearing guide in the X-axis allows for accurate and smooth positioning to measure the tool s diameter, while the Z-axis display can be locked to preset tool lengths quickly and precisely Quik-SET Z300 Z400 XM Z600 Accuracy ±.0005 ±.0005 ±.0005 ±.0005 Height Capacity (Z) 12.0 in 15.8 in 12.0 in 23.6 in Diameter Capacity (X) 10.0 in 10.0 in 15.8 in 23.6 in Presetter Height (H) 23.6 in 27.6 in 23.6 in 36.2 in Presetter Length (L) 15.8 in 15.8 in 19.7 in 23.2 in Presetter Width (W) 5.7 in 5.7 in 7.7 in 7.7 in Measuring Method Contact Probe Power Input AA Batteries Warranty One Year* SUPPLIED STANDARD WITH CAT/BT40 TOOL SLEEVE Hardware All Heat Treated Components Recirculating Ball Bearing and Linear Guide Powered by AA Batteries Heavy Duty Steel Base CAT, BT, HSK, ISO and VDI Interchangeable Sleeves Precision Resolution.0005in (0.10mm) Accuracy ±.0005in (0.10mm) Repeatability.0005in (0.10mm) Axis Squareness.0002in (.005mm) TIR Quik-SET Optional Tool Sleeves Style ISO-20 ISO/BT-30 CAT/ISO/BT-40 ISO/CAT/BT-50 HSK-40A/50F HSK-50A/63F HSK63A-63C HSK-100A Radius/Diameter Mode Absolute/Incremental modes Inch/mm modes Hardened Steel Probe in resolution Interchangeable Rotating Tool Sleeve Fine Adjustment Knob Clearance for CAT50 Tools with raised legs Recirculating Ball Bearing Cage Over Precision Ground Guide 158 Call: Visit: sales@doriantool.com

159 SMART TOOL-SETTERS TM & TIGHTENING FIXTURES Rotate the handle to lock the tool positively. Pull the Knob to unlock the Tool-Setter and rotate to position. Release the knob to lock in place. Vertical Tool Size DSTSCH-030 BT DSTSCH-040 BT-40 CAT DSTSCH-050 BT-50 CAT DSTSHSK-063 HSK DSTSHSK-100 HSK-100 Toolholder Taper Protected From Chips & Scratches Teflon Based Xylan Coating Quick Lock & Setting Multi-Position Setting Heavy Duty Construction Precise Quality & Workmanship Multi-Functional Holds CAT, BT or HSK Toolholders Mounting Holder Loading Application Mounting Holes Mount the Smart Tool-Setter on a solid workbench. Use the 4 holes provided on the base to bolt down the Smart Tool-Setter. Positioning Indexing knob Locking knob Put holder in while locking knob is in unlocked position. Rotate locking knob to locked position to lock holder on the invin groove located on the diameter of the holder. Locking knob positively locks the tool in and does not allow tool to come out of place. The Smart Tool-Setter's precise and heavy duty construction make the tool-setter very rigid and able to endure extreme forces without causing any damage to tools or the Smart Tool-Setter. The multi-functioning and positioning of the Smart Tool-Setter allow the operator to switch quickly and easily from one operation to another without loss of time. Small Tool Change Endmills can be easily, quickly, and precisely set with the Smart Tool-Setter. Large Tool Change Large tools can be mounted or removed with the Smart Tool-Setter. Pull Stud Change Vertical Horizontal Horizontal Pull the indexing knob to unlock, turn into a new position, and release the indexing to lock. Pull Studs can be quickly and easily changed using the Smart Tool-Setter. Call: Visit: sales@doriantool.com 159

160 Fontana Liri Italy Vol 6 TOOL GUIDE Inch f o r e v e r y d a y m a c h i n i n g MPR08 DT TG6 Dorian Tool International, Inc. 615 County Rd 219, East Bernard TX 77435, USA Phone: Toll free: Fax: sales@doriantool.com USA Warehouse Locations: East Bernard, TX Anaheim, CA Birmingham, AL Schiller Park, IL