90 Long Edge Helical End Mill
|
|
|
- Kristin Cannon
- 5 years ago
- Views:
Transcription
1 Limited Package Time Savings Savings on Techniks on Long Edge Milling End Tools Mills 90 Long Edge Helical End Mill For heavy-duty roughing including: slotting, profiling, deep shoulder cutting and ramping High-Performance APKT1003 Insert Increased helix angle for a smoother cut More accurate 90 shoulder See other side of flyer for tool specs, to find the right tool for your specific application. Features Made from H13 tool steel for high performance Special nickel-based coating protects against rust and prolongs tool life Coolant thru tool design Use with APKT1003 inserts for best results in all materials Produces better surface finishes Watch our All-Material Inserts in action! 90 Long Edge Helical Cutter Each package comes with one cutter and the listed quantity of inserts. Offer expires: 12/31/2015 Order No. End Mill Description Qty. Inserts Inserts Description Reg. Price Sale You Save! NP IEM CW APKT 1003 PDTR-LT30 $ $ $ NP IEM CW APKT 1003 PDTR-LT30 $ $ $ NP IEM CW APKT 1003 PDTR-LT30 $ $ $424.00
2 Techniks Long Edge Helical Cutter Our long edge helical cutters improve performance in heavy milling applications and feature a positive rake angle for reduced spindle loads and softer cuts. Now you can get the best roughing cutter and insert combination available and save some money too. Our helical stacked long edge cutter is an excellent choice for rough profile or semi-finish milling. Applications For heavy-duty roughing including: slotting, profiling, deep shoulder cutting and ramping A great choice for steels, stainless, cast iron, hardened steels, high-temp alloys and aluminum Benefits High-helix design allows high feed rates and reduced cutting forces Very stable in the cut thanks to positive rake angles L H ap d D Backed by Techniks 100% Satisfaction Guarantee. 90 Long Edge Helical Cutter Part No. Description D a p Flutes Inserts H L d Shank IEM CW Weldon IEM CW Weldon IEM CW Weldon Cuts ALL THESE Materials Learn More High-Performance APKT1003 Insert Best insert for roughing. Cuts all steels, cast iron, exotics and aluminum Use our recommended speeds & feeds when changing materials and keep the same insert Get Your Speeds & Feeds
3 Get a FREE High Feed End Mill or Face Mill Buy 20 inserts at our special reduced price! Get a free high feed end mill or face mill! All-Material Inserts Features Up to 60% faster machining Interchangeable with XDLT inserts Positive clearance optimized for helical ramping No limits on orders ask about volume discounts. Offer good while supplies last. Save 30% Part No. Description Qty. Inserts Reg. Each Sale Each Sale Price (20) You Save! End Mill Inserts-SDKX0904HF-LT30 20 $14.70 $10.29 $ $ Face Mill Inserts-SDKX1205HF-LT30 20 $18.10 $12.67 $ $ Select your end mills or face mills: d Benefits Higher feed rates for faster cutting Less radial cutting forces d D Coolant-thru for excellent chip evacuation l1 L ap L D Part No. Description D d Pockets L l1 Ap max R.Prog End Mill SDHF CW End Mill SDHF CW End Mill SDHF CW End Mill SDHF CW Face Mill SDHF C Face Mill SDHF C Face Mill SDHF C Face Mill SDHF C
4 Save Big on Techniks Top-Performing Inserts ADKT APKT SDKT SDKX TPUN Part No. Description Compatible With Reg. Price Sale You Save! ADKT1505PDTR-LT30 Iscar HM90 Cutters $9.60 $6.50 $ APKT PDTR LT30 Iscar HM90 Cutters $7.90 $4.35 $ APKT1003PDTR-LT30 Iscar HM90 Cutters $7.90 $4.35 $ APKT1604 PDTR-LT30 Ingersoll, Seco, Stellram Cutters $9.60 $6.50 $ SDKT1204AETN-LT30 Walter Cutters $9.60 $6.50 $ SDKX0904HF-LT30 Stellram High Feed Cutters $14.70 $7.35 $ SDKX1205HF-LT30 Stellram High Feed Cutters $18.10 $9.05 $ SEKT12T3AGSN-LT30 Sandvik R245 Cutters $9.60 $6.50 $ TPKN43PDTR-LT30 Iscar 90 Degree Milling Cutters $10.45 $7.00 $ TPUN322-LT30 Standard ISO Milling Insert $6.40 $4.25 $2.15 *Prices shown are per insert. Sold only in packs of 10. Our inserts are compatible with a wide range of other cutter bodies. Don't see what you need here? We carry one of the largest selections of inserts for all types of tooling and applications. Contact us today! at or scan the QR code Watch our All-Material Inserts in action!
5 Limited Time Savings on Techniks Turning Inserts Techniks LT1000 insert grades feature our patented, specially formulated coating that provides unmatched performance in ALL materials. Positive Turning Inserts 80 Degree Diamonds CCMT NN-LT1000 finishing $7.74 $ CCMT NN-LT1000 finishing $8.39 $ CCMT NN-LT1000 general $8.39 $ Degree Diamonds DCMT NN-LT1000 finishing $7.74 $ DCMT NN-LT1000 finishing $8.39 $ DCMT NN-LT1000 general $8.39 $ Degree Triangles TCMT NN-LT1000 finishing $8.39 $ TCMT NN-LT1000 general $8.39 $ TCMT NN-LT1000 finishing $9.19 $ TCMT NN-LT1000 general $9.19 $ Degree Diamonds Watch our video >> Learn more: CCMT DCMT TCMT VCMT VCMT 331 NN-LT1000 finishing $12.88 $ VCMT 332 NN-LT1000 general $12.88 $6.44 NN --> Traditional chip breaker for Multi-Material applications, mainly roughing to semi-finishing NX --> New Multi-Material chip breaker, used for roughing to finishing, avoid severe interrupted cuts...p --> Positive chip breaker, for soft steels, austenitic SS and high temperature alloys - light cuts & finishing NM --> First choice for extreme roughing of alloy steels and cast irons CNMG DNMG TNMG VNMG WNMG Negative Turning Inserts 80 Degree Diamonds CNMG 431 NN-LT1000 finishing $9.70 $ CNMG 432 NN-LT1000 general $9.70 $ CNMG 432 NX-LT1000 general $9.70 $ CNMP 432 NN-LT1000 general $9.70 $ CNMG 433 NN-LT1000 roughing $9.70 $ CNMP 433 NN-LT1000 medium-rough $9.70 $ Degree Diamonds DNMG 331 NN-LT1000 finishing $9.70 $ DNMG 332 NN-LT1000 general $9.70 $ DNMG 431 NN-LT1000 finishing $12.88 $ DNMG 432 NN-LT1000 general $12.88 $ DNMG 433 NN-LT1000 roughing $12.88 $ Degree Triangles TNMG 331 NN-LT1000 finishing $9.19 $ TNMG 332 NN-LT1000 general $9.19 $ TNMG 333 NN-LT1000 roughing $9.19 $ TNMP 332 NN-LT1000 finishing $9.19 $ TNMG 431 NN-LT1000 general $12.88 $ TNMG 432 NN-LT1000 general $12.88 $ TNMG 432 NX-LT1000 general $12.88 $ TNMG 433 NN-LT1000 roughing $12.88 $ Degree Diamonds VNMG 331 NN-LT1000 finishing $12.88 $ VNMG 332 NN-LT1000 general $12.88 $ Degree Trigons WNMG 331 NN-LT1000 finishing $9.19 $ WNMG 332 NN-LT1000 general $9.19 $ WNMG 332 NX-LT1000 general $9.19 $ WNMG 431 NN-LT1000 finishing $10.86 $ WNMG 432 NN-LT1000 general $10.86 $ WNMG 432 NM-LT1000 medium-rough $10.86 $ WNMG 432 NX-LT1000 general $10.86 $ WNMG 433 NN-LT1000 roughing $10.86 $ WNMP 432 NN-LT1000 finishing $10.86 $5.43
6 Package Savings on Techniks Milling Tools Limited Time Savings on Face Mill Packages 45 & 90 Face Mill Packages For facing, plunging, ramping, and pocket milling 45 Face Mill packages includes SEKT inserts Watch our All-Material Inserts in action! 90 Face Mill packages includes our new design high-helix APKT inserts for smoother cutting. 45 Face Mill Packages Order No. Face Mill Description Qty. Inserts Inserts Description Reg. Price Sale You Save! NP FM C (2"-CT) SEKT12T3AGSN-LT30 $ $ $ NP FM C (3"-CT) SEKT12T3AGSN-LT30 $ $ $ NP FM C (4"-CT) SEKT12T3AGSN-LT30 $1, $ $ NP FM C (5"-CT) SEKT12T3AGSN-LT30 $1, $ $ Face Mill Packages Order No. Face Mill Description Qty. Inserts Inserts Description Reg. Price Sale You Save! NP FM C (2"-CT) APKT1604PDTR-LT30 $ $ $ NP FM C (2"-CT) APKT1604PDTR-LT30 $ $ $ NP FM C (2.5"-CT) APKT1604PDTR-LT30 $ $ $ NP FM C (3"-CT) APKT1604PDTR-LT30 $ $ $ NP FM C (4"-CT) APKT1604PDTR-LT30 $1, $ $ NP FM C (5"-CT) APKT1604PDTR-LT30 $1, $ $ NP FM (6"-CT) APKT1604PDTR-LT30 $1, $ $850.00
7 Package Savings on Techniks Milling Tools Limited Time Savings on End Mill Packages Non-Coolant/Coolant-Thru End Mills For facing, plunging, ramping, and pocket milling APKT1003 inserts APKT1604 inserts Our new high-helix APKT inserts provide smoother cutting. End Mill Packages: Non-Coolant Order No. End Mill Description Qty. Inserts Inserts Description Reg. Price Sale You Save! NP IEM (1/2") APKT1003PDTR-LT30 $ $ $ NP IEM (5/8") APKT1003PDTR-LT30 $ $ $ NP IEM APKT1003PDTR-LT30 $ $ $ NP IEM (3/4") APKT1003PDTR-LT30 $ $ $ NP IEM CW APKT1003PDTR-LT30 $ $ $ NP IEM APKT1003PDTR-LT30 $ $ $ NP IEM (1") APKT1003PDTR-LT30 $ $ $ NP IEM APKT1003PDTR-LT30 $ $ $ NP IEM APKT1604PDTR-LT30 $ $ $ NP IEM (1-1/4") APKT1604PDTR-LT30 $ $ $ NP IEM (1-1/2") APKT1604PDTR-LT30 $ $ $ End Mill Packages: Coolant-Thru Order No. End Mill Description Qty. Inserts Inserts Description Reg. Price Sale You Save! NP IEM C (1/2"-CT-H13) APKT1003PDTR-LT30 $ $ $ NP IEM C (5/8"-CT-H13) APKT1003PDTR-LT30 $ $ $ NP IEM C (3/4"-CT-H13) APKT1003PDTR-LT30 $ $ $ NP IEM C (1"-CT-H13) APKT1003PDTR-LT30 $ $ $ NP IEM CW (1"-CT-W-H13) APKT1604PDTR-LT30 $ $ $ NP IEM C (1-1/4"-CT-H13) APKT1604PDTR-LT30 $ $ $ NP IEM C (1-1/2"-CT-H13) APKT1604PDTR-LT30 $ $ $319.00
8 Limited Package Time Savings Savings on Techniks on Turning Milling Toolholders Tools Turning Toolholder Packages For turning, facing and profiling Features: 93º and 95º lead angles Watch our All-Material Inserts in action! Uses two-sided inserts Each package includes one turning tool and 10 inserts. Order No. Turning Tool Holder Description Shank Size Qty Of Inserts Insert Description Reg.Price Sale You Save! NP MCLNR-16-4D 1" Square CNMG432NN-LT NP MCLNL-16-4D 1" Square CNMG432NN-LT NP MDJNR16-3D 1" Square DNMG332NN-LT NP MDJNL16-3D 1" Square DNMG332NN-LT NP MDJNR16-4D 1" Square DNMG432NN-LT NP MDJNL16-4D 1" Square DNMG432NN-LT NP MTJNR16-3D 1" Square TNMG332NN-LT NP MTJNL16-3D 1" Square TNMG332NN-LT NP MTJNR16-4D 1" Square TNMG432NN-LT NP MTJNL16-4D 1" Square TNMG432NN-LT NP MVJNR-16-3D 1" Square VNMG332NN-LT NP MVJNL-16-3D 1" Square VNMG332NN-LT NP MWLNR-16-4D 1" Square WNMG432NN-LT NP MWLNL-16-4D 1" Square WNMG432NN-LT
9 Package Limited Savings Time Savings on Techniks on Drill Milling Packages Tools Indexable Drill Packages Features: Made from H-13 tool steel and nickel-coated for long life Special O-ring design to help seal coolant Watch our All-Material Inserts in action! Innovative WCMX All-Material Inserts Trigon geometry for drilling Strong cutting edges for high feeds Fits other brands Each package includes one drill and 10 inserts. Order No. Drill Description Drill Size Drill Depth Qty Of Inserts Insert Description Reg. Price Sale You Save! NP WD C /8" 2.50" WCMX030208R NP WD C /4" 3.00" WCMX030208R NP WD C /8" 3.50" WCMX040208NN-LT NP WD C " 4.00" WCMX040208NN-LT NP WD C /4" 5.00" WCMX06T308NN-LT NP WD C /8" 5.50" WCMX06T308NN-LT NP WD C /2" 6.00" WCMX06T308NN-LT NP WD C /4" 7.00" WCMX06T308NN-LT NP WD C " 8.00" WCMX080412NN-LT NP WD C /4" 9.00" WCMX080412NN-LT
10 Package Limited Time Savings Savings on Techniks on High Milling Feed Milling Tools High Feed Face Mill & End Mill Packages For facing, plunging, ramping, and pocket milling Innovative SNKX All-Material Inserts Double-sided insert provides 8 cutting edges Strong helical edges reduces spindle load Fits other brands Learn more: High-Feed Face Mill Packages Coolant-Thru Order No. Face Mill Description Pockets Qty. Inserts Inserts Description Regular Sale You Save! NP HF C-4SN SNKX09T3-HF-LT NP HF C-5SN SNKX09T3-HF-LT30 1, NP HF C-6SN SNKX09T3-HF-LT30 1, NP HF C-7SN SNKX09T3-HF-LT30 1, High-Feed End Mill Packages Coolant-Thru Order No. End Mill Description Pockets Qty. Inserts Inserts Description Regular Sale You Save! NP HFEM CW SN SNKX09T3-HF-LT NP HFEM CW SN SNKX09T3-HF-LT NP HFEM CW SN SNKX09T3-HF-LT NP HFEM CW SN SNKX09T3-HF-LT
11 Package Savings on Techniks Milling Tools High Feed Milling Packages For facing, plunging, ramping, and pocket milling Face Mill Packages: Coolant-thru Order No. Face Mill Description Qty. Inserts Insert Description Reg. Price Sale You Save! NP SDHF C SDKX1205HF-LT30 $ $ $ NP SDHF C SDKX1205HF-LT30 $ $ $ NP SDHF C SDKX1205HF-LT30 $ $ $ NP SDHF C SDKX1205HF-LT30 $ $ $ End Mill Packages: Coolant-Thru Innovative SDKX All-Material Inserts Positive clearance optimized for helical ramping Up to 60% faster machining Fits other brands Learn more: Order No. Face Mill Description Qty. Inserts Insert Description Reg. Price Sale You Save! NP SDHF CW SDKX0904HF-LT30 $ $ $ NP SDHF CW SDKX0904HF-LT30 $ $ $ NP SDHF CW SDKX0904HF-LT30 $ $ $ NP SDHF CW SDKX0904HF-LT30 $ $ $221.00
12 Limited Package Time Savings Savings on Techniks on Aluminum Milling Milling Tools Face Mill & End Mill Packages for Aluminum Milling APGT Aluminum Milling Inserts Special chromium-nitrate coating for aluminum & titanium milling Super positive rake angle Special chip breaker design Learn more: 90 Face Mill Packages: Coolant-thru Order No. Face Mill Description Qty.Inserts Insert Description Reg. Price Sale You Save! NP FM C APGT1604PDER-ALU-LTO5 $ $ $ NP FM C APGT1604PDER-ALU-LTO5 $ $ $ NP FM C APGT1604PDER-ALU-LTO5 $1, $ $ NP FM C APGT1604PDER-ALU-LTO5 $1, $ $ NP FM C APGT1604PDER-ALU-LTO5 $1, $ $ End Mill Packages: Coolant-Thru Order No. Face Mill Description Qty.Inserts Insert Description Reg. Price Sale You Save! NP IEM C APGT1003PDER-ALU-LT05 $ $ $ NP IEM C APGT1003PDER-ALU-LT05 $ $ $ NP IEM CW APGT1003PDER-ALU-LT05 $ $ $ NP IEM C APGT1003PDER-ALU-LT05 $ $ $ NP IEM C APGT1003PDER-ALU-LT05 $ $ $ NP IEM CW APGT1604PDER-ALU-LTO5 $ $ $ NP IEM C APGT1604PDER-ALU-LTO5 $ $ $ NP IEM C APGT1604PDER-ALU-LTO5 $ $ $275.00
13 Limited Package Time Savings on on Techniks Heavy Duty Milling Face Tools Mills Heavy Duty Face Mill Packages For heavy cuts in steel, stainless steel, and cast iron Innovative SNKX All-Material Inserts Double-sided insert provides 8 cutting edges Strong helical edges reduces spindle load Fits other brands Watch our All-Material Inserts in action! Features: 45º positive rake angle Made from H-13 tool steel and nickel-coated for long life Each package includes one face mill and 20 inserts. Order No. Face Mill Description Pockets Qty. Inserts Insert Description Reg. Price Sale You Save! NP FM45-D SNKX LT30 $ $ $419 NP FM45-D SNKX LT30 $ $ $475 NP FM45-D SNKX LT30 $1, $ $531 NP FM45-D SNKX LT30 $1, $ $783
14 BohrSTAR Boring Kits Range 314" " Techniks accuracy and rigidity now in the kit sizes you need! Features Dial adjustable " increments Choose Rhombic or Triangular kits Includes everything you need* (*except toolholders see other side) BohrSTAR 43 (*Not to scale) Range: 0.314" to 1.69" BohrSTAR 100 Range: 0.314" to 3.94" Order No. Description Price BohrSTAR43 Rhombic Kit $1, BohrSTAR43 Triangular Kit $1, (*Not to scale) Order No. Description Price BohrSTAR100 Rhombic Kit $1, BohrSTAR100 Triangular Kit $1, Get more information about our BohrSTAR boring kits online at: Rhombic Kits Include: 1 Pc. EPMT 1.5_ 3 Pcs. CCMT 21.5_ 3 Pcs. CCMT 32.5_ Triangular Kits Include: 2 Pcs. TCMT 1.2_ 3 Pcs. TCMT 1.8_ 2 Pcs. TCMT 32.5_ BohrSTAR 170 Range: 0.314" to 6.69" (*Not to scale) Order No. Description Price BohrSTAR170 Rhombic Kit $2, BohrSTAR170 Triangular Kit $2, BohrSTAR 210 Range: 0.314" to 8.27" (*Not to scale) Order No. Description Price BohrSTAR210 Rhombic Kit $2, BohrSTAR210 Triangular Kit $2,815.00
15 BohrSTAR Boring Kits Range 314" " Features Exceed industry standards for taper accuracy and concentricity CAT & BT Styles l1 HSK Styles Weldon & R8 Styles Use with BohrSTAR kits and 54mm extensions. BohrSTAR Kit Toolholders Part No. Spindle Description l CAT 40 CT " CAT 40 CT " CAT 40 CT " CAT 50 CT " CAT 50 CT " CAT 50 CT " BT 40 BT " BT 40 BT " BT 40 BT " Toolholders come with coupling screw installed. Order for replacements. Part No. Spindle Description l BT 50 BT " BT 50 BT " BT 50 BT " HSK 63 HSK-63A " HSK 100 HSK-100A " Weldon B /4 0.75" Weldon B " Weldon B /4 1.25" Weldon B /2 1.50" R8 R " Extensions The coolant-thru extension directs coolant to the cutting zone for optimal stock removal rates. Part No. Description L P " P " Coolant-thru Spindle Extension Part No. Description L P-54-50R 1.97" Stock up on high-performance Techniks Inserts! Use Techniks LT10 or LT1000 grade inserts for extended insert life. New LT1000 PVD coating 3.5x thicker Triangular Inserts for BohrSTAR Kits Rhombic Inserts for BohrSTAR Kits Part No. Description Grade Part No. Description Grade 250% longer tool life TCMT 1.2(1) CCMT 2(1.5)0 HF 251 Great for exotics and stainless TCMT 1.2(1) CCMT 2(1.5)1 NN LT 10 Watch our All-Material Inserts in action! TCMT 1.8(1.5)0 HF TCMT 1.8(1.5)1 HM TCMT 1.8(1.5)2 HM TCMT 1.8(1.5)1 HF TCMT 1.8(1.5)1 PF TCMT 3(2.5)1 NN LT TCMT 3(2.5)1 NN LT TCMT 3(2.5)2 NN LT TCMT 3(2.5)2 NN LT TCMT 3(2.5)2 PM TCMT 3(2.5)3 NN LT TCMT 3(2.5)3 NN LT CCMT 2(1.5)1 NN LT CCMT 2(1.5)2 HM CCMT 3(2.5)0 HF CCMT 3(2.5)1 NN LT CCMT 3(2.5)1 NN LT CCMT 3(2.5)2 NN LT CCMT 3(2.5)2 NN LT CCMT 3(2.5)2 WM LT EPMT 1.5(3).5 PM * We recommend LT1000 grade inserts for maximum performance. LT1000 grade inserts feature advanced PVD coating that is 14 microns thick and last 250% longer than other inserts.
Missouri's trusted provider of carbide cutting tools!
45 & 90 Face Mill Packages For facing, plunging, ramping, and pocket milling Missouri's trusted provider 45 Face Mill packages includes SEKT inserts Watch our All-Material Inserts in action! 90 Face Mill
Canadians Supporting Canadians Pricing valid from July 1 to September 30, 2014
Canadians Supporting Canadians Pricing valid from July 1 to September 30, 2014 2014 Summer Flyer 8PC ULTIMATE METROLOGY KIT The International Manufacturing Technology Show is one of the largest industrial
Copy Milling Program Tools
Millstar face mills are equally useful on newer high velocity machines and older slower equipment and will optimize milling performance of all your machine tools. The hardened tool bodies can be run at
PROMOTIONS2014. Valid from February 17 to June 30,
PROMOTIONS2014 Valid from February 17 to June 30, 2014 www.iscarmetals.com Double-Sided Profiling Inserts with Six.250" Corner Radii The HELIDO H606 line is an economical tool and insert system which features
NEW. Excellent tool life with new-generation PVD coating! Keeping the Customer First. New PVD coated grade for stainless steel turning
Keeping the Customer First Tungaloy Report No. 399-E New PVD coated grade for stainless steel turning NEW TUNGALOY Excellent tool life with new-generation PVD coating! TUNGALOY TUNGALOY Features Increased
with better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
Jet-Stream Modular Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
PROMO PRICING EXPIRES MAY 31ST, 2018
PROMO PRICING EXPIRES MAY 31ST, 2018 Available From: Specifications are subject to change without notice. No responsibility for errors and/or printing errors will be accepted. High Feed HF Milling Program
CARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
PROMOTIONS2015. Machining Intelligently KIT DEMO KIT. Valid until February 28, 2015 IQ ISCAR HIGH Q LINES.
PROMOTIONS2015 Valid until February 28, 2015 IQ IQ DEMO KIT KIT www.iscar.com KIT 1 Promo Code #IQV8 TURNING - Economy and Heavy Cut ISO style inserts, used in all machine shops, historically represent
NPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9
NPA Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts Page 1 / 9 Page 2 / 9 Highlights Tools carrying triangular inserts with 5 mm helical cutting edges Effective and
FMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 38/39 FM Style 2 Toroid Taper End Milling Cutter 38/39 FMA Arbor Style Milling Cutter 38/39 Insert ata 40/41 Cutting
FMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 42/43 FM Style 2 Toroid Taper End Milling Cutter 42/43 FMA Arbor Style Milling Cutter 42/43 Insert ata 44/45 Cutting
Quick Change Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
Turning Operation. Tough Impact Resistant High Cutting Speed. Hard & Tough Impact & Wear Resistant. Medium Cutting Speed
Carbide F149 F150 Notes Insert Grade Chart Material Turning Operation Universal Roughing Hard & Wear Resistant Hard & Tough Impact & Wear Resistant Tough Impact Resistant High Cutting Speed Cutting Speed
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
Speed (SFM) Radial DOC x D. .5 x D. 1 x D. .5 x D. 1 x D. .5 x D.
GP High Performance 4 Flute End Mills TyCarb GP High Performance end mills feature Differential flute spacing to achieve virtually chatter free machining in a wide range of materials. Excellent results
Hertel Indexable Drills (HID)
Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel
CAT.AC6040M/AC6030M.3/15. Carbide Grades for Turning AC6030M / AC6040M. AC6030M & AC6040M Grades for machining stainless steels M
CAT./.3/15 Carbide Grades for Turning / & Grades for machining stainless steels M Features & Benefits s new Absotech platinum PVD grade coating, with fine grains and high hardness, achieved 1.5 times higher
Seco NewS Summary
Seco NewS Summary 2014-1 2 overcoming your challenges At Seco, every action we take is calculated to overcome the challenges you face today and will face tomorrow. Our global team partners closely with
Catalog Section Guide Full Table of Contents pgs. 2 4
Catalog Section Guide Full Table of Contents pgs. 2 4 Collet & Nut Holders Collets & Nuts End Mill Holders ShrinkFIT Holders page 15 page 49 page 75 page 93 Face Mill Arbors Other Holders Turn/Mill Tooling
VSM11. WIDIA Victory Shoulder Mill 11 VSM11
WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for versatility, low horsepower consumption,
Think efficiency, Think HSS MILLING
Think efficiency, Think HSS MILLING SUMMARY MILLING TOOLS 2 Zoom on a milling cutter 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Select
9605 with MICROFORM TECHNOLOGY It s Simple. The Toughest Cutting Edge.
with MICROFORM TECHNOLOGY It s Simple. The Toughest Cutting Edge. NEW TURNING GRADE FOR DIFFICULT-TO-MACHINE MATERIALS LESS SCRAP. LESS FAILURE. LESS STRESS. MAKE US PROVE IT 960. YOUR ANSWER TO DIFFICULT-TO-MACHINE
Flexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
CoroMill. All solutions at a glance
CoroMill All solutions at a glance CoroMill Product overview Milling grades according to groups Shoulder milling CoroMill 316 CoroMill 490 CoroMill 790 Long edge cutter Insert size Max. cutting depth a
BELCAR PRODUCTS MILLING CUTTERS AND INSERTS TABLE OF CONTENTS
BELCAR PRODUCTS MILLING CUTTERS AND INSERTS TABLE OF CONTENTS MILLING CUTTERS AP9 WELDON / R8 SHANKS ENDMILLS PAGE 2 AP9 SHELL MILL CUTTERS PAGE 3 AP9 LONG EDGE END MILLS PAGE 4 OF HIGH SHEAR OCTAGON CUTTERS
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY JETSTREAM TOOLING WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many of which are featured
Collet Chucks & Morse Tapers End Mill & Shell Mill Holders...147
103 CONTENT Selection Guide System Overview...105 PC Connection...106 Small Diameter & Finish Boring...107 Rough Boring Head Systems...108 Large Diameter Boring System...109-111 Insert Information...112-115
w w w. i s c a r. c o m
www.iscar.com Railway Industry The railway industry has played an important role in the past two decades becoming one of the leading means of transportation for freight and passengers. Ongoing investments
TOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
EMP01. Indexable Milling Tools. Square shoulder milling tools B 88. Kr:90 o. Specification of tools. Spare parts. EMP01 Straight shank.
Milling Tools Kr:90 o Step shoulder Slot milling Ramp milling Helical machining Plunge milling EMP01 Straight shank Specification of tools EMP01 Straight shank Stock Basic dimensions(mm) ØD ød L L1 apmax
Valid from April 1 until December 31, 2019 Imperial Version OFFERS SPECIAL INNOVATION 2019 MACHINING TELLIGENTLY.
Valid from April until December 3, 09 Imperial Version OFFERS SPECIAL MACHINING 4.0 INDUSTRY TELLIGENTLY www.iscar.ca The Smallest Helical Indexable Multi-Toothed Endmill for 90 Shoulder Milling 3 30 X
JANUARY 2007 / NEW-072 / PAGE 1 OF 7
JANUARY 2007 / NEW-072 / PAGE 1 OF 7 Ingersoll TaeguLine introduces HEX-TURN, a new, unique addition to the turning product line that offers exceptional performance and cost saving benefits. The 12 cutting
CNC Tooling Solutions
CNC Tooling Solutions Your success hangs on the reliability of every component. CNC TOOLING SOLUTIONS FROM SPINDLE TO WORKPIECE 2017 Techniks is synonymous with toolholders, but the key to our success
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
VSM11. WIDIA Victory Shoulder Mill 11 VSM11
Victory Shoulder Mill 11 ADVANCES 2015 WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for
FMA B1.25-SE12-07L
Milling Cutter Identification Guide Cutter Style ead Angle Sort Number Tool Diameter Mounting Style FMA01-100-B1.25-SE12-07 Tool Machining Direction (R Omit) Number of s (Z) Cutting Edge ength (of insert)
Proven Performance CARBIDE INSERTS. Proven Performance. Performance, Quality & Technology Will Turn Machining Into PROFIT!
Proven Performance CARBIDE INSERTS P S High Temp. Alloy Carbon Steel M Stainless Steel N Aluminum / Non Ferrous K Cast Iron U Proven Performance Performance, Quality & Technology Will Turn Machining Into
New. Products2013.
T u n g a l o y www.tungaloy.com Company Overview Providing Complete Tooling Solutions for the Metal Removal and Industrial Product Sectors TUNGALOY is one of the world s leading manufacturers of carbide
Insert Inch Overview. Insert Overview
Insert Overview The Inserts Millstar inserts are fully ground precision inserts for better chip control, faster metal removal and higher surface accuracies. They are far more accurate than pressed and
powrgrip for aerospace manufacturing Superior toolholding strength and accuracy
powrgrip for aerospace manufacturing Superior toolholding strength and accuracy REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Aerospace Introduction
Alpha Mill Series. AMS1000 / AMS1500 / AMS2000 / AMS3000 AMS4000 / BT & HSK Tooling System. Alpha mill series
2014 KP08EM01 Alpha mill series Alpha Mill Series AMS00 / AMS / AMS2000 / AMS3000 AMS00 / BT & HSK Tooling System New Lineup alpha mill series makes high feed and deep depth of cutting possible with various
18mm Insert Face Mill
January 2005 / NEW-033 PAGE 1 OF 9 18mm Insert Face Mill MATERIAL Cast Iron, Stainless Steel, Carbon Steel, Hi-Temp Alloys, Titanium, Inconel DIAMETER RANGE 3.00" - 12.00" LEAD ANGLES 0º and 45º INSERT
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
8029 S 200th St. Kent, WA USA Ph: Fax:
8029 S 200th St. Kent, WA 98032 USA Ph: 253-872-7050 Fax: 253-395-0230 1 GENERAL INFORMATION Rottler CBN and PCD Inserts are laser marked with our part number on one side. On single sided inserts, the
11/15/2009. There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate
s Geometry & Milling Processes There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate All three of these will be discussed in later lessons What is a cutting
MACHINE VISE + PARALLEL SET
2017 Fall/Winter Flyer Pricing valid from October 1 to January 31, 2018 MACHINE VISE + PARALLEL SET Vises are matched An integral key and large fasteners reduce reflection Chip cover protects lead screw
Kr:90 o Face milling. Step shoulder. A-type coupling. C-type coupling. Stock Basic dimensions(mm) Number of teeth R L ØD ød L apmax Z
Milling Milling Tools Face Kr:90 o Face milling Step shoulder FMP01 A-type coupling -type coupling ap ap C-type coupling D-type coupling ap ap Stock asic dimensions(mm) Number of teeth R L ØD ød L apmax
Cylindrical shank version Indexable Insert Endmill
Cylindrical shank version Indexable Endmill ø1 - ø 1 ød ST-FCM1-0 -FCM- 0 -FCM0-0 ST-FCM0-0 ST-FCM0- ST-FCM- -FCM- -FCM- 1 1 ød 1 0 0 1 17 0 0 0 70 1 ARG00 ARG00 ARG00 ARG0 ARG0 CATAOG No. =The ength of
4/5/6RFH 4/5/6RFH NEW. High Efficiency Roughing End Mill for Difficult-to-Cut Material
For Difficult-to-Cut Material High Efficiency Roughing End Mill 4/5/6RFH High Efficiency Roughing End Mill for Difficult-to-Cut Material 4/5/6RFH NEW High Efficiency Machining of Difficult-to-Cut Material
NOW AVAILABLE FOR LINE, A BRAND NEW CHIP SPLITTER INSERT FOR TOP PRODUCTIVITY WITH REDUCED CUTTING FORCE
New The Splitter PKT 1204 PER-SM New New PKT 1705 PER-SM NHX 160708R-SM NOW VILLE FOR & LINE, RND NEW CHIP SPLITTER INSERT FOR TOP PRODUCTIVITY WITH REDUCED CUTTING FORCE TaeguTec has launched a new line
PROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
-treme thread cutting. Tiny Tools. New Products. Metric
TM -treme thread cutting Tiny Tools New Products Metric 2014-2015 Tiny Tools Broaching Tools for Hexagon Keys - HK The HK broaching system have been developed to machine internal keyways inside blind or
NPA. Anti-Vibration Boring Bars with Exchangeable Turning Heads. New Product Announcement. Page 1 / 11
NPA New Product Announcement Page 1 / 11 Anti-Vibration Boring Bars with Exchangeable Turning Heads Page 2 / 11 Highlights ISCAR is introducing a new line of vibration dampening boring bars intended for
Metal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7.
Content Metal Cutting - 5 Assoc Prof Zainal Abidin Ahmad Dept. of Manufacturing & Industrial Engineering Faculty of Mechanical Engineering Universiti Teknologi Malaysia 7. MILLING Introduction Horizontal
SECO NEWS SUMMARY NEW IMAGE NEEDED (PHOTO SHOOT WEEK OF SEPTEMBER 12) THE TOOLS YOU RELY ON TO IMPROVE
SECO NEWS SUMMARY 2017-1 NEW IMAGE NEEDED (PHOTO SHOOT WEEK OF SEPTEMBER 12) THE TOOLS YOU RELY ON TO IMPROVE CONSTANT INVESTMENT IN CONSTANT IMPROVEMENT RE=6 CORNER RADIUS R217/220.28 CUTTER DURATOMIC
STYLE CY/SFCY STYLE TA/SFTA
STYLE CY/SFCY 2 STYLE TA/SFTA 2 6. Tool Size Ø Shank Ø Neck Ø Neck Length Total Length Use with Insert Insert Ordering No. 2 Insert Style Screw Torx Key TAV 0250-3.75-0500 1/4 1/2.225 1 1/4 3 3/4 MS 06N
SECO CUTTER EXCHANGE PROGRAM SWITCH TO SECO & SAVE
SECO CUTTER EXCHANGE PROGRAM SWITCH TO SECO & SAVE Seco s partnership with distributors who share our passion for the success of their customers and knowledge about the cutting world is critical to our
Optimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
powrgrip for automotive manufacturing Superior toolholding strength and accuracy
powrgrip for automotive manufacturing Superior toolholding strength and accuracy REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Aerospace Introduction
MIX & MATCH CAT40 ER Collet Chucks & Collets
Canadians Supporting Canadians Pricing valid from January 1 to March 31, 2019 2019 Winter Flyer MIX & MATCH CAT40 ER Collet Chucks & Collets Huge Savings on a 6-Pack CAT40 ER Collet Chucks 1. Select 6
DEAL. Victory Shoulder Mill Series Starter KITS: VSM11 and VSM17 Cutter with 10 Inserts, Starter KITS. VSM490 Cutter with 20 Inserts
Victory Shoulder Mill Series Starter KITS: VSM11 and VSM17 Cutter with 10 Inserts, DEAL VSM490 Cutter with 20 Inserts The Victory Shoulder Mill Series is a high-performance, versatile, robust, 90 square
UPDATE. NEW Gold-QuadF 09 09mm IC Insert Sizes
Styles: End Mill 15G1F Face Mill 5G5F, 5G6F s: 1.000" - 3.000" Inserts: SDXS0904MPR-MM SDXS0904MPR-MR SDXS0904MPR-MR1 Grades: IN4004 IN4005 IN4030 IN4035 UPDATE NEW Gold-QuadF 09 09mm IC Insert Sizes Features
NO NEED TO CHOOSE NINE9 DOES IT ALL!
NO NEED TO CHOOSE NINE9 DOES IT ALL! Cat. No. 11.a NC Spot Drills Corner Rounding Cutters & Engraving Tools Various applications of NC Spot Drill We Focus: Higher efficiency Position accuracy Long tool
Cost reduction Cost reduction Cost reduction
Cost reduction Quality, performance, value - Guaranteed! Work-Piece Cutting Speed vc(sfm) ISO Material Hardness (HB) Hardness (HRC) PC5300 PC5400 P Carbon steel C = 0.10-0.35% 80~180 10~ 459~886 328~820
Cutting Tools DIGEST Catalog
Cutting Tools DIGEST Catalog Insert Grade CVD Coating Innovation CA5 series Ultra fine interface increases adhesion strength to provide long tool life and stable machining High aspect ratio of α-al 2 O
N024E PRODUCT NEWS TURNING TOOLS ROTATING TOOLS
N024E PRODUCT S 2018.02 TURNING TOOLS ROTATING TOOLS CREATE A BETTER FUTURE TOGETHER WITH OUR CUSTOMERS Announcing DIAEDGE, our new brand of tools that brings together cutting-edge technologies, exciting
MAXIMILL SHOULDER MILLING SYSTEM PRODUCT INFORMATION. Presentation _Customer
MAXIMILL 491 90 SHOULDER MILLING SYSTEM PRODUCT INFORMATION Presentation _Customer 2 \ MAXIMILL 491 PRODUCT LAUNCH AGENDA General information Overall message Unique sales proposition Technical details
Mission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or
Cutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology TOOLING NEWS E-135
TOOLING NEWS E-135 New Coated Grade for General Steel Turning Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology Coated Grade for Steel Turning
Leading edge technology for high efficiency steel turning
TOOL NEWS New CVD Coated Grade for High Speed Steel Turning 2013.4 Update B165A /RP Breaker Expansion Leading edge technology for high efficiency steel turning 2 in 1 technology ensures longer tool life.
BASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES
BASIC TECHNICAL INFORMATION FOR HANNIBAL CARBIDE would like to inform you of some basic technical knowledge regarding reamers. Following these guidelines will reduce overall set-up time, while increasing
Drilling Tools. Common problems and solutions for drilling. Problem Cause Solution. Bend,distortion and slippage of machine and workpiece
Drilling Tools for solid carbide drills C Common problems and solutions for drilling Problem Cause Solution Drill breakage Bend,distortion and slippage of machine and workpiece Increase the rigidity of
INDEX. List Price Catalog - Current Pricing On Our Website. List Price Catalog - Check Website For Current Pricing. * = additional sizes added
INDEX List Price Catalog - Check Website For Current Pricing * = additional sizes added PG CATEGORY NOTE 4 Threadmill - UNC/UNF * 5 Threadmill - UNC/UNF (Continued) & Thread Pac 6 Threadmill - NPT/NPTF
AC6020M /AC6030M / AC6040M
CAT.AC6000MBROCHURE.12/16 Electric Carbide, Inc. / /, & Grades for machining stainless steels M & Features & Benefits s new Absotech platinum CVD grade coating, with fine grains and high hardness, achieved
T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
Valid from. MARcH 1 - AUGUST 31,
Valid from MARcH 1 - AUGUST 31, 2014 www.tungaloyamerica.com 1 Choices: Shellmill Type Holder 1) Buy 20 inserts, receive 1 shellmill at 25% off 2) Buy 30 inserts, receive 1 shellmill at 50% off 3) Buy
SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
Application and Technical Information Thread Milling System (TMS) Minimum Bore Diameters for Thread Milling
Inserts Application and Technical Information Minimum Bore iameters for Thread Milling UN-ISO-BSW tpi 48 3 4 0 16 1 10 8 7 6 5 4.5 4 Technical ata Accessories Vintage Cutters Widia Cutters Thread Milling
CONTENTS WELCOME TO THE WORLD OF HIGH-SPEED INNOVATION
Colibri Spindles ltd. Lavon Industrial Park, 2011800, Israel Tel +972 4 9089100 Fax +972 4 9589061 marketing@colibrispindles.com www.colibrispindles.com HSM JET SPINDLE TJS-CS01-07-2017 Case Study Summaries
DIE & MOLD MACHINING TOOL SOLUTIONS FOR INDUSTRIES DM18 HEAD OFFICE
DM18 DIE & MOLD MACHINING TOOL SOLUTIONS FOR INDUSTRIES HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South Korea Phone : +82-32-526-0909 E-mail : yg1@yg1.kr www.yg1.kr Note The new address above
APRIL 2009 / NEW-100 / PAGE 1 OF 13
APRIL 2009 / NEW-100 / PAGE 1 OF 13 The standard UNIDEX line covers reaming applications from 5/16 to 1 1/4 diameter. The single indexable blade and high wear resistant carbide or cermet pads provide a
INDEXABLE BORING BAR AND INSERTS FLAT TOP, CHIP CONTROL, CBN, AND PCD
INDEXABLE BORING BAR AND S FLAT TOP, CHIP CONTROL,, AND 80 Diamond.156 IC R.156.040 80 DIAMOND FLAT TOP 80 DIAMOND CHIP CONTROL AT6+ 0.003 ACD5031 ACD5031E AT6+ 0.007 ACD5071 ACD5071E AT6+ 0.015 ACD5151
PROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining
No.011-USA April 2009 Small diameter endmills able to handle various machining modes Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining Hybrid TAC Mills provide
TaeguTec has now launched brand new plunge milling operations; it is the ideal product for reducing cost and machining time.
www.tgutec.com New! New New NOW AVAIABE, NEW FOR T-I INE Plunge machining is one of the best solutions for boosting productivity that can perform both plunge as well as 9 milling in deep cavity machining
End Mills 4. Cutting Tools 1 (Cont d) End-mills (Cont d)
Outline Review of Milling Cutting Tools Milling Milling Operations Workpiece Materials Tool Selection Machining Tips Toolholders Fixtures Cutting Tools HSS tools Coated (TiN, Al O 3, TiAlN,...) versions
Grade/Chip breaker. Contents. Grades. Chip breakers A02 A03 A04. Korloy grades system Grade selection system The feature of korloy grades A06 A08 A09
Grade/Chip breaker Contents Korloy grades system Grade selection system The feature of korloy grades A02 A03 A04 For For For A06 A08 A09 >>> /Chipbreakers Korloy grades system Uncoated P For steel ST05
No: Features. Facing Shouldering Slotting Ramping down Helical Ramping Through Coolant System
No: 0-1 Features - Rich Mill Series, as a new concept tool for milling application, offer improved tool life and increase of usable cutting edge adopting innovative double sided insert with unique geometries.
Shoulder Mills.
Mill 1-10 Platform...................................................................P2 P20 Mill 1-10, 0 Shoulder Milling Cutters...............................................P2 P12 Mill 1-10, 0 Helical
Engraving with a Rigid Tool Engraving Tool Feeds and Speeds
Engraving with a Rigid Tool Engraving Tool Feeds and Speeds Material 3000 RPM 6000 RPM 7500 RPM 10000 RPM Aluminum/Aluminum Alloys 6 12 15 20 Brass/Bronze 6 12 15 20 Copper/Copper Alloys 6 12 15 20 Cast
Cat.3a Super Power Drill Super Drill
www.jic-tools.com.tw Cat.3a Super Power Drill Super Drill WE HAVE INVESTED RESOURCES IN THE DESIGN & MANUFACTURE OF INSERTED CUTTERS Cost Saving Our innovative tooling design upgrades productivity and
Command Boring Systems
Command Boring Systems Eco Bore Table Of Contents Eco Bore Boring Systems...1-9 Visit Command Tooling Systems on line catalog for Command standard product part file downloads, up-to-date stock levels and
KORLOY Indexable new generation drill KING DRILL
KORLOY Indexable new generation drill KING DRILL Optimized insert design for maximum drilling efficiency KING DRILL Code system of holder K 5D - 0 07 KING/KORLOY Aspect ratio(l/d) D,.5D, 3D, 3.5D, 4D,
TAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
Innovative insert provides superior
TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades